Select Category
Mate Series Plastic 30° Rod & Cup Holder - Drain - Round Top - Black
Rod Holders, Mate Series
$27.79
Plastic 30° Rod & Cup Holder - Drain - Round Top - Black Features ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Accessories SKU 67311 — MFG# 90919 SKU 67316 — MFG# 90891 SKU 67317 — MFG# 90... More Details
Mate Series Plastic 30° Rod & Cup Holder - Drain - Round Top - White
Rod Holders, Mate Series
$27.79
Plastic 30° Rod & Cup Holder - Drain - Round Top - White Features: ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Color: White Accessories SKU 80726 — MFG# P1334314 More Details
Plastic 30° Rod & Cup Holder - Open - Oval Top - White Features ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU 6731... More Details
Mate Series Plastic Rod & Cup Holder 30 Degree Open w/Oval Top - Black
Rod Holders, Mate Series
$27.79
Plastic Rod & Cup Holder 30 Degree Open with Oval Top - Black Features: ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Color: Black More Details
Mate Series Plastic Rod & Cup Holder 30° Closed w/Oval Top f/Kayaks - Black
Rod Holders, Mate Series
$27.79
Plastic Rod & Cup Holder 30° Closed with Oval Top for Kayaks - Black Features: ABS Plastic with Oval Top 30º Rod Angle Closed Bottom – for Kayaks Includes Gasket and 3 Rivets More Details
Mate Series Plastic Rod & Cup Holder Backing Plate f/Round Rod/Cup Only f/3-3/4" Holes
Rod Holders, Mate Series
$15.28
You save:
$137.61
Plastic Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" Holes Threaded Backing Plates for replacing existing ø3-3/4 cup holders with ROUND ABS PLASTIC Combination Rod & Cup Holders. S... More Details
Stainless Steel 0° Rod & Cup Holder - Drain - Oval Top Features 316 Stainless with Oval Top 0º Rod Angle 3/8" NPT Drain Fitting Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919... More Details
Mate Series Stainless Steel 0° Rod & Cup Holder - Drain - Round Top
Rod Holders, Mate Series
$222.39
Stainless Steel 0° Rod & Cup Holder - Drain - Round Top Features 316 Stainless with Round Top 0º Rod Angle 3/8" NPT Drain Fitting Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 909... More Details
Stainless Steel 0° Rod & Cup Holder - Open - Oval Top Features 316 Stainless with Oval Top 0º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU 6731... More Details
Stainless Steel 0° Rod & Cup Holder - Open - Round Top Features 316 Stainless with Round Top 0º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU 67... More Details
Mate Series Stainless Steel 15° Rod & Cup Holder - Drain - Oval Top
Rod Holders, Mate Series
$222.39
Stainless Steel 15° Rod & Cup Holder - Drain - Oval Top Features 316 Stainless with Oval Top 15º Rod Angle 3/8" NPT Drain Fitting Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 909... More Details
Mate Series Stainless Steel 15° Rod & Cup Holder - Drain - Round Top
Rod Holders, Mate Series
$222.39
Stainless Steel 15° Rod & Cup Holder - Drain - Round Top Features 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Accessories SKU 67311 — MFG# 90919 SKU 67316 — MFG# 90891 SKU 67317 ... More Details
Stainless Steel 15° Rod & Cup Holder - Open - Oval Top Features 316 Stainless with Oval Top 15º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU 67... More Details
Mate Series Stainless Steel 15° Rod & Cup Holder - Open - Round Top
Rod Holders, Mate Series
$222.39
Stainless Steel 15° Rod & Cup Holder - Open - Round Top Features 316 Stainless with Round Top 15º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU ... More Details
Mate Series Stainless Steel 30° Rod & Cup Holder - Drain - Oval Top
Rod Holders, Mate Series
$222.39
Stainless Steel 30° Rod & Cup Holder - Drain - Oval Top Features 316 Stainless with Oval Top 30º Rod Angle 3/8" NPT Drain Fitting Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 909... More Details
Mate Series Stainless Steel 30° Rod & Cup Holder - Drain - Round Top
Rod Holders, Mate Series
$222.39
Stainless Steel 30° Rod & Cup Holder - Drain - Round Top Features 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Accessories SKU 67311 — MFG# 90919 SKU 67316 — MFG# 90891 SKU 67317 ... More Details
Stainless Steel 30° Rod & Cup Holder - Open - Oval Top Features 316 Stainless with Oval Top 30º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU 67... More Details
Mate Series Stainless Steel 30° Rod & Cup Holder - Open - Round Top
Rod Holders, Mate Series
$222.39
Stainless Steel 30° Rod & Cup Holder - Open - Round Top Features 316 Stainless with Round Top 30º Rod Angle Open at Bottom Documentation Quick GuideDownload PDF Accessories SKU 67311 — MFG# 90919 SKU ... More Details
Stainless Steel Backing Plate Specifically for use with all Mate Series Rod and Cup Holders. More Details
Mate Series Stainless Steel Cap f/Oval Plastic Rod Holders
Rod Holder Accessories, Mate Series
$19.45
Stainless Steel Cap for Oval Plastic Rod Holders Features For use with P2030B and P2030W For plastic rod/cup holders with oval top More Details
Mate Series Stainless Steel Cap f/Round Plastic Rod Holders
Rod Holder Accessories, Mate Series
$19.45
Stainless Steel Cap for Round Plastic Rod Holders Features For use with P1000B, P1000DW, P1015DB and P1015DW For plastic rod/cup holders with round top More Details
Mate Series Stainless Steel Rod & Cup Holder Backing Plate f/Round Rod/Cup Only f/3-3/4" Holes
Rod Holders, Mate Series
$37.52
Stainless Steel Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" Holes Threaded Backing Plates for replacing existing ø3-3/4 cup holders with round SST plastic combination rod and cup ... More Details
Mate Series Stainless Steel Rod & Cup Holder Threaded Backing Plate
Rod Holder Accessories, Mate Series
$33.35
Stainless Steel Rod & Cup Holder Threaded Backing Plate This threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less. Features: Cast ... More Details
Straight Adapter 3/8″ NPT, 1/2″ Barb More Details
Tee Adapter 1/2″ Barb, 1/2 Barb, 1/2″ Barb More Details
135Amp 12/24V Windlass Isolator Maxwell circuit breaker/isolator panel, 135 Amp 12/24-volt, suitable for all 800 to 3500 Series 12V & 4000 24V windlasses. Features: For protection of the main conducto... More Details
Maxwell 8" Emergency Crank Handle f/RC8, RC10, RC12 & Freedom Series Windlasses
Windlass Accessories, Maxwell
$120.35
EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES) For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if acc... More Details
AA Sensor Cable for AA150 & AA560 15M (49.2') The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters. Features: The male plugs on both ends of this cable are directly compatible wi... More Details
AA Sensor Cable for AA150 & AA560 6.5M (21.3') The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters. Features: The male plugs on both ends of this cable are directly compatible w... More Details
Rode Counter Auto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode. Rode length monitoring from the helm. Large LCD display with adjustable... More Details
AA342 Remote for Dual Windlasses - 4 Outputs This is a handheld wired roving dual windlass controller. The remote has 4 outputs unit that can be installed to meet your specific requirements. Features:... More Details
Maxwell AA560 Rope Chain or All Chain Counter Control - Black
Windlass Accessories, Maxwell
$1,640.63
Maxwell AA560 Panel Mount Windlass Controller and Rode Counter Preset stopping point on retrieval One-touch function to deploy and retrieve a preset length of rode Adjustable back lit display in feet,... More Details
Anchor Rode - 15'-5/16" Chain to 150'-5/8" Nylon Brait 15' of 5/16" HT spliced chain to 150' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that ... More Details
Anchor Rode - 15'-1/4" Chain to 150'-1/2" Nylon Brait 15' of 1/4" HT spliced chain to 150' of 1/2" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields ... More Details
Anchor Rode - 18'-5/16" Chain to 200'-5/8" Nylon Brait 18' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yield... More Details
Anchor Rode - 20'-3/8" Chain to 200'-5/8" Nylon Brait 20' of 3/8" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yi... More Details
Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait 20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that ... More Details
Anchor Rode - 25'-3/8" Chain to 250'-5/8" Nylon Brait 25' of 3/8" HT spliced chain to 250' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yi... More Details
Anchor Rode - 30'-5/16" Chain to 150'-5/8" Nylon Brait 30 ft. of 5/16 in. HT spliced chain to 150 ft. of 5/8 in. Nylon Brait™ rope. Nylon Brait™ is an 8-strand nylon rope created through braid technol... More Details
Anchor Rode 15' 1/4" Chain to 300' 1/2" Nylon Brait 15 feet of 1/4 inch Chain Spliced to 300 feet of 1/2 inch Line More Details
Anchor Rode 30' 5/16" Chain to 300' 5/8" Nylon Brait 30 feet of 5/16 inch Chain Spliced to 300 feet of 5/8 inch Line More Details
ANCHOR SWIVEL SHACKLES The use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Th... More Details
ANCHOR SWIVEL SHACKLES The use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Th... More Details
Anchor Tensioner 7-12mm Features: Pulls anchor tight to keep it snug in the bow roller Takes weight off the windlass and prevent accidental deployment of anchor Cam action offers up to 150kg of tensio... More Details
ANCHORMAX™ Windlass Features: Has an extremely high power to weight ratio ompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor Intrusion below decks is minimised maki... More Details
Bearing Kit 300-3500 Spare gearbox bearing kit for Maxwell VC1000 windlass. Kit includes: (2) 1" ext circlip, (1) 12 x 28 x 8 ball bearing, (1) 25 x 12 x 47 ball bearing. More Details
Bolt - Hex HD 5/16" UNC x 1-1/2" SS304 More Details
Bush 1/2" Nylon Features: 1/2" Nylon 741 330B More Details
Circlip - 1-1/2" Stainless Steel 1-1/2" Stainless Steel More Details
Maxwell Circlip Extension 1-1/8" Stainless Steel - 3100-112-SS2
Windlass Accessories, Maxwell
$19.84
Circlip Extension 1-1/8" Stainless Steel - 3100-112-SS2 Features: 1-1/8" Stainless Steel More Details
Circuit Breaker Isolator Panel - 80 AMP Suitable for a wide range of windlasses and capstans. Features: For protection of the main conductor circuit for DC winches Mount as close as possible to the ba... More Details
Clutch Nut RC8 Freedom - 500/800 Features: Replacement clutch nut for Freedom rope / chain windlass Specifications: Maxwell Model No. 4376 More Details
Dual Install T Junction Connector AA560 Dual Install T Junction Connector More Details
Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm Chain Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent... More Details
Extendable Hinged Bow Roller Extendable Hinged Bow Rollers have a hinged base which allows for shorter or longer overall extension. Extendable Hinged: A - 198mm (7-13/16") B - 125mm (4-15/16") C - 73m... More Details
Fixed Bow Roller - Size 1 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 1: L - 205mm (8-1/8") B - 72mm (2-7/8") H - 74mm (3") C - 44mm (1-3/4") Documentation Quick G... More Details
Fixed Bow Roller - Size 2 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 2: L - 320mm (12-5/8") B - 86mm (3-7/16") H - 74mm (3") C - 44mm (1-3/4") Documentation Quick... More Details
Fixed Bow Roller w/Loop Maxwell also featurs a Fixed Bow Roller with an Anchor Loop. Fixed with Loop: A - N/A B - 134mm (5-1/4") C - 75mm (3") D - N/A H - 65mm (2-9/16") H1 - 155mm (6-1/8") L - 460mm ... More Details
Foot Switch & Cover - Stainless Steel Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Features: ... More Details
Pressure Arm Upgrade Kit Made specifically for Maxwell's Freedom Series of Windlasses. More Details
Freedom Shaft Service Kit Maxwell shaft service kit for Maxwell Freedom series windlasses. More Details
Gearbox Key Maxwell Windlass Gearbox Key 3150 9.53X, 9.53X67 ST ST More Details
Hinged Bow Roller - Size 1 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 1: L - 320mm (12-5/8") B - 92mm (3-5/8") H - 72mm (2-7/8") h - 133mm (5-1/4") C - 44mm (1-3/... More Details
Hinged Bow Roller - Size 2 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 2: L - 430mm (16-15/16") B - 160mm (5-5/16") H - 100mm (4") h - 190mm (7-1/2") C - 66mm (2-1... More Details
Maxwell HRC 10-8 Rope Chain Horizontal Windlass 5/16" Chain, 5/8" Rope 12V, with Capstan
Windlasses, Maxwell
$5,929.53
HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with Capstan Designed for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of M... More Details
Maxwell HRC10 Horizontal Rope Chain Windlass - 12V 3/8" Chain, 5/8" Rope
Windlasses, Maxwell
$6,522.74
HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" Rope Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automa... More Details
Maxwell HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope
Windlasses, Maxwell
$5,218.20
You save:
$1,304.54
HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully aut... More Details
Maxwell HRC6 12V Horizontal Freefall Rope/Chain Series 1/4" Chain 1/2" Rope
Windlasses, Maxwell
$2,692.21
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original an... More Details
Maxwell HRC8 12V Horizontal Freefall Rope/Chain Series 5/16" Chain 9/16" Min Rope
Windlasses, Maxwell
$2,153.78
You save:
$538.43
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original an... More Details
Key 300-1500 10mm x 90mm x 60mm More Details
Kit Freedom Key - Washer Maxwell key/washer kit for Maxwell Freedom series windlasses. More Details
Kit Liberty Stripper Assembly - 10mm - 3/8" Chain Features: Maxwell Marine Replacement Windlass Stripper Applications: Maxwell Liberty 2500 Windlass Chainwheel: 3/8" Includes Screw More Details
Label 3500 Maxwell 3856 Round Label 3500 More Details
Levered Chain Stopper f/3/8" or 10mm Chain Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental... More Details
Levered Chain Stopper f/5/16" or 8mm Chain Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental... More Details
MAXSET Stainless Steel Anchor - 13lb The "MAXSET" stainless steel (AISI 316) anchor is based on the proven `Plough' design. More Details
MAXSET Stainless Steel Anchor - 22lb The "MAXSET" stainless steel (AISI 316) anchor is based on the proven `Plough' design. More Details
MAXSET Stainless Steel Anchor - 35lb The "MAXSET" stainless steel (AISI 316) anchor is based on the proven `Plough' design. More Details
Maxwell Marine Replacement Windlass Stripper Features: Applications: Maxwell Liberty 1700 Windlass Chainwheel: 5/16" Includes Assembly Screw More Details
Motor 12V 1000W 1000 Watt 12 Volt Series Wound Replacement Windlass Motor Features: 1000 Watt 12 Volt Replacement Windlass Motor Designed for Maxwell 800 / 1000 windlasses 4 hole flange motor replaces... More Details
Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly wi... More Details
Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly wi... More Details
P10068 Motor - 12V Permanent magnet replacement windlass motor Used in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. Please... More Details
FOOTSWITCHES Maxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 1... More Details
FOOTSWITCH Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12... More Details
FOOTSWITCH Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12... More Details
Pin Roll Maxwell Pin Roll spare part More Details
Plunger/Spring Kit - 2200-4500 Maxwell Plunger/Spring Kit for VWX - 4 of each More Details
PM Solenoid Pack - 12V Maxwell's PM Solenoid Pack that is 12V. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. More Details
Pressure Arm Upper 3/8" Chain Maxwell Pressure Arm Liberty 2500 3/8" Chain More Details
Pressure Arm Upper 8mm - 5/16" CW Features: Pressure Arm Upper 8mm 5/16" CW More Details
Quick Release Clip Windlass Quick Release Clip More Details
Maxwell RC 12-12 Vertical Windlass 1/2" Chain, 3/4" Rope, 12V
Windlasses, Maxwell
$7,075.10
You save:
$1,768.78
RC 12-12 Vertical Windlass 1/2" Chain, 3/4" Rope, 12V Package Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/Down Panel Switch Handle The RC12 Series incorporates Maxwell's latest stylis... More Details
RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12v Package Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emergency crank / clutch release handle Features Simple two pie... More Details
RC10-10 Capstan Windlass 12V - 3/8" Chain & 5/8" Rope The combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16") a... More Details
Maxwell RC10-8 Capstan 12V Windlass - 5/16" Chain & 5/8" Rope
Windlasses, Maxwell
$4,711.96
You save:
$1,178.00
RC10-8 Capstan 12V Windlass - 5/16" Chain & 5/8" Rope The stainless steel (AISI 316) RC10 Series rope/chain windlass is part of Maxwell’s upper mid-range line-up and is suitable for boats ranging from... More Details
Maxwell RC10/10 12V Automatic Rope Chain Windlass 3/8" Chain to 5/8" Rope
Windlasses, Maxwell
$5,547.41
RC10 Automatic Rope/Chain Windlass Designed for 3/8" chain and 5/8" rope combination Maximum Pull: 1870lbs. Metric chain size: 10mm Motor Wattage: 1200W Innovative heavy duty stainless steel pressure ... More Details
Maxwell RC10/10 24V Capstan Windlass f/3/8" Chain & 5/8" Rope
Windlasses, Maxwell
$4,711.96
You save:
$1,178.00
RC10/10 24V Capstan Windlass for 3/8" Chain & 5/8" Rope The combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16_)... More Details
Maxwell RC10/8 12V Automatic Rope Chain Windlass 5/16" Chain to 5/8" Rope
Windlasses, Maxwell
$5,547.41
RC10 Automatic Rope/Chain Windlass Designed for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbs Metric Chain Size: 8mm Motor Wattage: 1000W Innovative heavy duty stainless steel pressure ... More Details
Maxwell RC12-10 12V Windlass EDC - 3/8" Chain & 3/4" Rope
Windlasses, Maxwell
$6,750.73
You save:
$1,687.68
RC12-10 12V Windlass EDC - 3/8" Chain & 3/4" Rope The RC12-10 automatic rope/chain windlass is built to effortlessly retrieve and deploy a 3/8 in. short link chain and 5/8" to 3/4 in. 8-Plait rope usi... More Details
