Attwood Marine
1-1/2" White Interior/Exterior Light W/Ss Bezel - 6342Ss7 - 23-6342Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.
2-3/4" Warm White Interior/Exterior Light W/White Bezel - 6320W7 - 23-6320W7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.
2-Pin Socket Only For #911339 - 910836B-1 - 23-910836B1F1
Die-cast Zamak with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking collar series when locking collar is removed.
3 Step Dive Ladder Platform Mt - 19626 - 23-19626F1
3 Step Dive Ladder Transom Mt - 19843 - 23-19843F1
3 Step Ss Sport/Diver Ldr W/99180 Mounting Hardware - 19833 - 23-19833F1
3 Step Ss Teles Hook Ladder Disc - 6131 - 23-06131F1
30" All Around Led Nav Light @24 *Sold By The Case Only* - 5550-S30-1 - 23-5550S301F1
4 Step Ss Teles Hook Ladder Disc - 6141 - 23-06141F1
50 Ser S.S. Bracket Reverse Ball - Sl50Ssp3-7 - 23-Sl50Ssp37F1
Mounting bracket: pem type: Ball 10mm. direction forward.
800 Cart. Aerator 3 1/2 @24 *Sold By The Case Only* - 1004419 - 23-46501F1
90 Deg Fl Tank Vent W/Black Cap - 1670-1 - 23-16701F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Aft-Deck Shower System - 814948 - 23-41314F1
Handy, compact and made from high-impact engineering grade plastic. Contains hand-held shower spray head, 6' hose, hot and cold water controls all in one unit with hinged cover for protection from elements. Can be used to rinse off salt or fresh water after swimming. Measures 9-1/2" long, 5" wide and 2-1/4" deep. Installation hole size is 8-1/2" long by 3-7/8" wide. Predrilled for six #8 fasteners.
Aluminum Paddle, 5' - 11765-1 - 23-117651F1
Heavy Aluminum and plastic rugged construction. Ergonomic grip design. Poly protective shaft grip.
Anchor Lift System - 13710-4 - 23-137104F1
This convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy-gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes: Anchor Mount/Rope Guide Assembly, Anchor Rope Reel Assembly, Rear Pulley, Rear Pulley Axle.Anchor deploys and lifts smoothly and securely Easy installation with detailed instructionsMultiple mounting solutionsAnchor stows conveniently in anchor mountAnchor, rope, and mounting hardware not included.
Attwood 1" Drain Plug With Brass T-Handle W/O Chain - 7526A7 - 23-7526A7F1
Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.
Attwood 1" Drain Plug With Stainless Steel Snap Handle - 7520A3 - 23-7520A3F1
Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.
Attwood 1" Drain Plug With Stainless Steel T-Handle W/O Chain - 7518A3 - 23-7518A3F1
Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.
Attwood 1/4" X 100' Hollow Braid Polypropylene Anchor Line Blue/White - 11722-2 - 23-117222F1
Solid braided nylon offers a rope that has a strong round cord that will not flatten out which stays flexible throughout its life and have a soft hand. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals.
Attwood 107011 Wood Bow 6' - 10701-1 - 23-107011F1
Fnished hardwood support bows create arch support for any boat cover. Use with support sockets (23-107963) sold separately.
Attwood 107021 Wood Bow 8' - 10702-1 - 23-107021F1
Fnished hardwood support bows create arch support for any boat cover. Use with support sockets (23-107963) sold separately.
Attwood 107141 Coated Fiberglass 8' - 10714-1 - 23-107141F1
Coated fiberglass upport bows create arch support for any boat cover. Use with support sockets (23-107963) sold separately.
Attwood 110296 Coupler Locking Pin - 11029-6 - 23-110296F1
Solid zinc plated steel.
Attwood 111246 Wheel Bearing Protector Cover, 1 Pr. - 11124-6 - 23-111246F1
Covers your bearing protectors to keep out dirt and grime and prevent grease from being thrown on to the trailer wheels.
Attwood 111477 Winch Strap 2" X 20' - 11147-7 - 23-111477F1
2" wide polyester webbing. Heavy-duty, forged, zinc-plated steel snap hook. Spring-loaded closure for secure attachment. Extra-long throat for easy attachment.
Attwood 111505 Telescoping Boat Hook, 3-1/2' To 5-1/2' - 11150-5 - 23-111505F1
Telescoping adjustment collar has molded ribbing - easy to grip and twist for length adjustment, even when wet. High-quality 6061-T6 aluminum tubing with marine finish and rubber vinyl grips. Hook includes non-marring polyethylene tips
Attwood 111805 Telescoping Boat Hook, 3-1/2' To 8' - 11180-5 - 23-111805F1
Telescoping adjustment collar has molded ribbing - easy to grip and twist for length adjustment, even when wet. High-quality 6061-T6 aluminum tubing with marine finish and rubber vinyl grips. Hook includes non-marring polyethylene tips
Attwood 112011 Rubber Bow Stop, 3" X 3" - 11201-1 - 23-112011F1
Non-marring prime rubber compound.
Attwood 113707 Prop Wrench Set - 11370-7 - 23-113707F1
Multiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple propsBuilt of durable plastic
Attwood 116543 Fold-Up Drink Holder - 11654-3 - 23-116543F1
Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs.Rigid molded ABS plastic.
Attwood 11663-7 Motor Link Steering Kit - 11663-7 - 23-116637F1
Link your kicker motor to your main steering system Works with all dual or single cable steering & popular hydraulic systemsManeuver your boat while trolling, right from the steering wheelQuick & easy assembly allows you to independently tilt either motor up or downConnector rod can be left permanently attachedZinc plated rod can be bent and/or cut to size
Attwood 117127 Marine Bungee Cord Pack - 11712-7 - 23-117127F1
Ideal for boat covers and general use. High tensile strength steel hooks with protective coatingContains: (8) 24" White, (6) 30" Blue, (2) 42" Yellow and (2) Adjustable Hooks for customizing length
Attwood 11756-2 Kayak Paddle Asymmetrical 7' (Color May Vary) - 11756-2 - 23-117562F1
2-Piece design for easy storage 3° Angle options for bladeBlack shaft, smooth grips, and drip rings
Attwood 11757-2 Kayak Paddle Asymmetrical 7.5' (Color May Vary) - 11757-2 - 23-117572F1
2-Piece design for easy storage 3° angle options for bladeBlade colored drip ringsBlack shaft, smooth grips
Attwood 117682 Asymmetrical Kayak Paddle, 7' - 11768-2 - 23-117682F1
Asymmetrical spoon blade paddles are designed to increase efficiency of stroke performance and reduce noise and blade flutter in the water. Made from heavy duty aluminum and engineered plastic construction. Two piece design with multiple angle positions that allow for customization for each paddler. Drip rings included. Soft foam grips.
Attwood 11786B7 Led Stainless Steel Drink Holders, W/Blue Leds - 11786B-7 - 23-11786B7F1
Convenient and stylish LED drink holder makes it easy to see in low-light conditions. The vibrant 35 Lumen interior light ring complements boat interiors. 12 VDC.
Attwood 11786W7 Led Stainless Steel Drink Holders, W/White Leds - 11786W-7 - 23-11786W7F1
Convenient and stylish LED drink holder makes it easy to see in low-light conditions. The vibrant 35 Lumen interior light ring complements boat interiors. 12 VDC.
Attwood 118281 Telescoping Paddle - 11828-1 - 23-118281F1
Compact for easy storageTelescopes 20"-42" (1.06m)High impact plastic blade with corrosion-resistant aluminum poleGreat for emergency uses
Attwood 118296 Flat Whistle - 11829-6 - 23-118296F1
A perfect signal whistle for attaching to life vestsLanyard included
Attwood 118414 Fuel/Water Separator Replacement Filter - 11841-4 - 23-118414F1
Replacement fuel filter for various OEM and aftermarket fuel/water separators.
Attwood 118492 Cockpit Caddy - 11849-2 - 23-118492F1
Great organizer for fishing gear and personal items. Has slots for fillet knife, pliers, and over 22 lures. Easy-to-mount suction cups stay secure, even in rough conditions. Caddies can be mounted in back or on the bottom and can be permanently attached with screws. Non-corrosive white plastic.
Attwood 119014 Battery Charger - 11901-4 - 23-119014F1
Dual rated 12V and 6V battery charger can be used for all of your marine, automotive, RV, and sport applications. The charger is compact and a perfect for your bench, garage, or shop use. LED indicators let you know that your battery is fully charged. Overcharge, short circuit, and reverse polarity protection provide years of worry-free use.
Attwood 127732 Fold, Medium - 12773-2 - 23-127732F1
Fold down for convenient and compact storage or extend for added reach. A flip of the handle opens and locks the net into place. Easily pull back the trigger and the net collapses down into an easily stowable size. Constructed of durable knot-free netting.
Attwood 127742 Fold, Large - 12774-2 - 23-127742F1
Fold down for convenient and compact storage or extend for added reach. A flip of the handle opens and locks the net into place. Easily pull back the trigger and the net collapses down into an easily stowable size. Constructed of durable knot-free netting.
Attwood 128205 Motorwell Boot 4" Black - 12820-5 - 23-128205F1
UV-resisitant motor well boot provides protection for control cables, wires, or fuel lines. Split side allows for installation without disconnecting controls. Includes an attachment gasket ring and ties for a secure fit.
Attwood 137537 Galvanized Anchor Lead Chain W/Shackles, 1/4" X 4' - 13753-7 - 23-137537F1
For use on penetrating anchors. Anchor lead chain holds down anchor shanks, in order to keep anchor flat. Increases holding strength, especially in strong currents, high winds, and coastal waters. Protects line from chafing on sharp rocks. These anchor chains include a welded, oversized link on each end for easy installation and anchor attachment.
Attwood 14" Angled 1-Mile Pulsar Pole Mounted Bi-Color Stowaway, 2-Pin Standard Pole - 5092-14-7 - 23-5092147F1
1-mile, 225° Red/Green light visibility for boats up to 39.4' (12m) in length. Includes 8 watt wedge-base lamp. 2-pin locking collar "universal fit" pole.
Attwood 14" Straight 1-Mile Pulsar Pole Mounted Bi-Color Stowaway, 2-Pin Locking Collar Pole - 5091-14-7 - 23-5091147F1
1-mile, 225° Red/Green light visibility for boats up to 39.4' (12m) in length. Includes 8 watt wedge-base lamp. 2-pin locking collar "universal fit" pole.
Attwood 141377 Cooler Mounting Kit - 14137-7 - 23-141377F1
Coolers corners stay put with straps to prevent injury, boat and cooler damage. Quick disconnect strap design. Corrosion proof. Fastens with #8 screws.
Attwood 141907 C-Clamp Mount Portable Led Nav Light Kit W/Threaded Pole, Marine Gray - 23-141907 - 23-141907F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141917 C-Clamp Mount Portable Led Nav Light Kit W/Threaded Pole, Real Tree® Max-4 Camo - 23-141917 - 23-141917F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141927 Deck Mount Portable Led Nav Light Kit W/Telescoping Pole, Marine Gray - 14192-7 - 23-141927F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: Deck mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141957 C-Clamp Mount Portable Led Nav Light Kit W/Telescoping Pole, Marine Gray - 14194-7 - 23-141947F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141957 C-Clamp Mount Portable Led Nav Light Kit W/Telescoping Pole, Real Tree® Max-4 Camo - 14195-7 - 23-141957F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141967 All-Craft Battery Operated Led Portable Nav Light Kit W/Threaded Pole, Marine Gray - 14196-7 - 23-141967F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp, Screw-Down & Adhesive Pad mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141977 All-Craft Battery Operated Led Portable Nav Light Kit W/Threaded Pole, Real Tree® Max-4 Camo - 14197-7 - 23-141977F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp, Screw-Down & Adhesive Pad mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 142626 12V, Dual Usb Adapter/Charger - 14262-6 - 23-142626F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 142636 12V Adapter/Voltmeter - 14263-6 - 23-142636F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 142646 12V Adapter W/Dual Usb Ports & Battery Charge Display - 14264-6 - 23-142646F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 142686 Dual Usb Adapter - 14268-6 - 23-142686F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 2Nm All-Round Anti Glare Fold-Down Lights With Black Composite Lightarmor Base & Aluminum Pole - 5350-Pa12-7 - 23-5350Pa127F1
2-mile, 360°, illumination for boats up to 39.4 ft. (12m). Robust design provides easy, single-handed cam-lock operation. Articulating head for use in all applications. Exclusive anti-glare design preserves night vision. Over 50,000 hour life. Durable, anodized aluminum pole. Operating range: 10.5 VDC -14.4 VDC. 10-year warranty. Includes LightArmor™ fold-down, horizontal mount base. Packaged with a rail mount adapter (#91367).
Attwood 2Nm All-Round Anti Glare Fold-Down Lights With Black Composite Lightarmor Base & Aluminum Pole - 5350-Pa20-7 - 23-5350Pa207F1
2-mile, 360°, illumination for boats up to 39.4 ft. (12m). Robust design provides easy, single-handed cam-lock operation. Articulating head for use in all applications. Exclusive anti-glare design preserves night vision. Over 50,000 hour life. Durable, anodized aluminum pole. Operating range: 10.5 VDC -14.4 VDC. 10-year warranty. Includes LightArmor™ fold-down, horizontal mount base. Packaged with a rail mount adapter (#91367).
Attwood 3-1/2" Zig-Zag Cleat, Black Nylon (2 Per Pack) - 11926-7 - 23-119267F1
Makes a great primary cleat on kayaks, canoes, fishing boats and pontoons. Also good as a utility cleat on docks, piers, trailers and more. Handles rope up to 3/8" dia. With the easy-to-use lace back design, you can use this gripper cleat for securing your anchor, vessel or any other object without any knots. Zinc plated.
Attwood 3" Zig-Zag Cleat, Zinc Plated (2 Per Pack) - 11950-6 - 23-119506F1
Makes a great primary cleat on kayaks, canoes, fishing boats and pontoons. Also good as a utility cleat on docks, piers, trailers and more. Handles rope up to 3/8" dia. With the easy-to-use lace back design, you can use this gripper cleat for securing your anchor, vessel or any other object without any knots. Zinc plated.
Attwood 3/4 Outside Eye End Bimini Top Fitting, White - 10601-3 - 23-106013F1
Attwood 3/4 Outside Eye End Bimini Top Fitting, White.
Attwood 3/4" Acetal Thru Hull With Strainer, White - 725433 - 23-38863F1
Thru-hull connector with strainer prevents clogging of the aerator pump. Strainer attaches to threads that extend beyond external retaining nut. Acetal construction.Note: Do not use strainer as a thru-hull connector nut replacement. Thru-Hull connectors are designed for installation above the water line only.
Attwood 3/4" Plastic Drain Plug And Receiver Kit - 17211-3 - 23-172113F1
Molded black ABS plastic with threaded receiver. Molded retaining strap. Includes attaching screws and elastomeric gasket for a watertight fit.
Attwood 3/8" X 15' Premium Double Braided Nylon Dock Line, White - 117601-7 - 23-1176017F1
These light- and heat-stabilized lines are made from strong, multifilament nylon fiber that can absorb sudden shock loads without breaking. Attwood dock lines offer greater wet strength and abrasion-resistance than other nylons, and are spliced for added strength. Resistant to UV light, rot, oil, gasoline, grease, marine growth, mold, mildew, and most chemicals. 3-year warranty.
Attwood 38901 90° Connector, Acetal Construction 3/4" - 726835 - 23-38901F1
Threaded female end fits A-series aerator pump outlets and Tsunami threaded outlets. Barbed end accommodates 3/4" ID hose. Acetal construction.
Attwood 38903 90° Connector, Acetal Construction 3/4" - 726894 - 23-38903F1
Threaded female end fits A-series aerator pump outlets and Tsunami threaded outlets. Barbed end accommodates 3/4" ID hose. Acetal construction.
Attwood 3Nm Anchor Masthead Light With Black Composite Lightarmor Base - 7201-P-7 - 23-7201P7F1
3-mile, 360° illumination. USCG certified for use on freshwater and saltwater boats up to 65.6' (20m). Simple, sealed, one-piece lens. Concealed, protected wiring at the base. Uses two festoon-style 8-watt lamps. Easy to install, requires (2) #10 S.S. screws. Will collapse and not break if accidentally hit. Includes a LightArmor™ horizontal base and is packaged with a rail mount adapter (#91367).
Attwood 3Nm Anchor Masthead Light With Black Composite Lightarmor Base - 7202-P-7 - 23-7202P7F1
3-mile, 360° illumination. USCG certified for use on freshwater and saltwater boats up to 65.6' (20m). Simple, sealed, one-piece lens. Concealed, protected wiring at the base. Uses two festoon-style 8-watt lamps. Easy to install, requires (2) #10 S.S. screws. Will collapse and not break if accidentally hit. Includes a LightArmor™ horizontal base and is packaged with a rail mount adapter (#91367).
Attwood 41997 Bilge Hose, 3/4" X 6' - 839876 - 23-41997F1
6' hose with (2) clamps.
Attwood 48" Gas Tank Strap Set For 3-6 Gallon Tanks, White - 11526-3 - 23-115263F1
1" wide white nylon web strap with zinc-plated carbon steel snap and quick-release buckle. Includes metal foot-man securing loops and screws. For 3-6 gallon tanks.
Attwood 50104 Pro Series Rod Holder W/Combo Mount, Black - 1135996 - 23-50104F1
The Combo mount takes the Pro Series to the next level with the ability to mount in multiple configurations. Unique patented cam-lock provides quick, easy, and secure vertical adjustment. Adjusts vertically 180° and horizontally 360° to effectively position rod tip. Stainless steel reinforced mounting post for superior strength. Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. Includes combo mount.
Attwood 50144 Adjustable Rod Holder With Flush Mount-Black - 1137457 - 23-50144F1
Features a superior ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting and spinning rods. Includes flush mount. This design offers an improved fit with positive lock for secure rod holder mounting. Compatible with all Attwood and other leading rod holder mounting patterns.
Attwood 5100241 Frosted Globe All-Round Light, 2-Pin Standard Pole 24" - 5100-24-1 - 23-5100241F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. 2-pin standard pole: fits base 911370, 911445, 911443, 911339, 911490
Attwood 5110247 All-Round Light, Frosted 24" - 5110-24-7 - 23-5110247F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.
Attwood 5110307 All Round Light, Frosted 30" W/Locking Collar - 5110-30-7 - 23-5110307F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.
Attwood 5110367 All-Round Light, Frosted 36" - 5110-36-7 - 23-5110367F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.
Attwood 5110427 All-Round Light, Frosted 42" - 5110-42-7 - 23-5110427F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.
Attwood 5110487 All-Round Light Frosted 48" - 5110-48-7 - 23-5110487F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.
Attwood 5110547 All-Round Light Frosted 54" - 5110-54-7 - 23-5110547F1
360° visibility, for boats up to 39.4' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.
Attwood 52534 Tsunami Recirq Aerator Kit - 1224751 - 23-52534F1
The Tsunami MK2 Recurq aerator Kit recirculates livewell water to keep it cooler and rich in oxygen. This self-contained system feeds a separate aerator spray head and works even while you are underway and cannot use a thru-hull connection. Add this kit to any tank that already has a freshwater fill system. Or use as a backup pump for a fail-safe system. Recirq Kit includes: 500 GPH Tsunami MK2 aerator pump with short inlet, threaded outlet4125-1 aerator spray head4232-1 Stainless Steel strainer(2) Plastic hose clamps3/4" x 23" long poly hoseStraight thread-to-barb connector
Attwood 5358-P12-7 12" 2Nm All-Round Anti Glare Fold-Down Lights With Black Composite Lightarmor Base & Black Pole - 5358-P12-7 - 23-5358P127F1
2-mile, 360°, illumination for boats up to 39.4 ft. (12m). Robust design provides easy, single-handed cam-lock operation. Articulating head for use in all applications. Exclusive anti-glare design preserves night vision. Over 50,000 hour life. Operating range: 10.5 VDC -14.4 VDC. 10-year warranty. Includes LightArmor™ fold-down, horizontal mount base. Packaged with a rail mount adapter (#91367).
Attwood 55057 Sahara Mk2 Automatic Bilge Pump, 500 Gph - 1316882 - 23-55057F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesUniversal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its categorySteadySwitch™: Buoyancy control reduces cycling, draining the bilge not the batteryNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeImproved Motor Cooling/Heat Dissipation : Prevents overheating that may cause failures, such as blown fuse, leaking, etcUniversal mounting pattern makes replacement simple
Attwood 55087 Sahara Mk2 Automatic Bilge Pump, 800 Gph - 1317978 - 23-55087F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesUniversal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its categorySteadySwitch™: Buoyancy control reduces cycling, draining the bilge not the batteryNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeImproved Motor Cooling/Heat Dissipation : Prevents overheating that may cause failures, such as blown fuse, leaking, etcUniversal mounting pattern makes replacement simple
Attwood 55097 Sahara Mk2 Automatic Bilge Pump, 800 Gph - 1318343 - 23-55097F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesUniversal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its categorySteadySwitch™: Buoyancy control reduces cycling, draining the bilge not the batteryNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeImproved Motor Cooling/Heat Dissipation : Prevents overheating that may cause failures, such as blown fuse, leaking, etcUniversal mounting pattern makes replacement simple
Attwood 55127 Sahara Mk2 Automatic Bilge Pump, 1200 Gph - 1319439 - 23-55127F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesUniversal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its categorySteadySwitch™: Buoyancy control reduces cycling, draining the bilge not the batteryNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeImproved Motor Cooling/Heat Dissipation : Prevents overheating that may cause failures, such as blown fuse, leaking, etcUniversal mounting pattern makes replacement simple
Attwood 55137 Sahara Mk2 Automatic Bilge Pump, 1200 Gph - 1319804 - 23-55137F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesUniversal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its categorySteadySwitch™: Buoyancy control reduces cycling, draining the bilge not the batteryNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeImproved Motor Cooling/Heat Dissipation : Prevents overheating that may cause failures, such as blown fuse, leaking, etcUniversal mounting pattern makes replacement simple
Attwood 553024Bp7 Lightarmor™ Fast Action All-Round Led Light, 24" - 5530-24Bp7 - 23-553024Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglersand hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finishcomplements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLight head adjusts 15° fore to 15° aftLED light engines last for 50,000 hours5-year warranty
Attwood 553036Bp7 Lightarmor™ Fast Action All-Round Led Light, 36" - 5530-36Bp7 - 23-553036Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglersand hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finishcomplements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLight head adjusts 15° fore to 15° aftLED light engines last for 50,000 hours5-year warranty
Attwood 553042Bp7 Lightarmor™ Fast Action All-Round Led Light, 42" - 5530-42Bp7 - 23-553042Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglersand hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finishcomplements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLight head adjusts 15° fore to 15° aftLED light engines last for 50,000 hours5-year warranty
Attwood 553054Bp7 Lightarmor™ Fast Action All-Round Led Light, 54" - 5530-54Bp7 - 23-553054Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglersand hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finishcomplements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLight head adjusts 15° fore to 15° aftLED light engines last for 50,000 hours5-year warranty
Attwood 5550Pa207 2Nm Led All-Round Fold-Down Light With Lightarmor Base & Aluminum Pole, 20" - 5550-Pa20-7 - 23-5550Pa207F1
2-mile, 360° visibility. USCG certified for use on boats up up to 39.4' (12m). Exclusive anti-glare design preserves night vision. Over 50,000 hour life. Articulating head for use in all applications. Includes a black composite LightArmor™ fold-down base that provides easy, single-handed cam-lock operation. Bases install with required #10 fasteners. Also includes rail mount adapter (#91367). 10 year warranty.
Attwood 5557P12A7 2Nm Led All-Round Fold-Down Light With Lightarmor Base & Aluminum Pole, 12" - 5557-P12A7 - 23-5557P12A7F1
2-mile, 360° visibility. USCG certified for use on boats up up to 39.4' (12m). Exclusive anti-glare design preserves night vision. Over 50,000 hour life. Articulating head for use in all applications. Includes a black composite LightArmor™ fold-down base that provides easy, single-handed cam-lock operation. Bases install with required #10 fasteners. Also includes rail mount adapter (#91367). 10 year warranty.
Attwood 5558-P12A7 2Nm Led All-Round Fold-Down Light With Lightarmor Base & Black Composite Pole, 12" - 5558-P12A7 - 23-5558P12A7F1
2-mile, 360° visibility. USCG certified for use on boats up up to 39.4' (12m). Exclusive anti-glare design preserves night vision. Over 50,000 hour life. Articulating head for use in all applications. Includes a black composite LightArmor™ fold-down base that provides easy, single-handed cam-lock operation. Bases install with required #10 fasteners. Also includes rail mount adapter (#91367). 10 year warranty.
Attwood 5580A7 Led Waketower All-Round Light - 5580A7 - 23-5580A7F1
2-mile, 360° visibility. For pleasure craft up to 39.4 ft (12 m).Compact size designed for installation on a wakeboard tower, radar arch, hard top, poling platform, tuna tower, or other fixed structure. Direct LED replacement for Attwood's incandescent 5940 series.Attwood's proprietary optics design draws only 1.8 watts at 12VDC - the lowest power draw of any 2-mile all-round light on the market today. Lights are rated for 50,000+ hours of use. Only draws 3 watts at 12V7" wire leadsFull sealed electronics10-year warranty
Attwood 5590247 Powerbase Fold Down Led Nav Light System, All-Round Light 24" - 5590-24-7 - 23-5590247F1
PowerBase intelligent, powered fold down light base. Safety, Accessibility, and Reliability without ever leaving your helm. Easily stow and deploy lights with the push of a button from the comfort of your helm. The only intelligent light mount with a full suite of Object Detection Technology. Industry-standard mounting footprints for worry-free installation. Light system consists of one PowerBase for lights and one light. Includes manual override capability.
Attwood 56067 Tsunami T500 Mk2 Cartridge Bilge Pump, 12V - 1353772 - 23-56067F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outFlexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesRetrofits footprint of current offering: Provides a seamless transition for existing customersNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeIndustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failureTricuspid Check Valve: Helps prevent the water from backflowing through the pump GPH Ratings: With & Without Check Valve @ 13.6V
Attwood 56087 Tsunami T800 Mk2 Cartridge Bilge Pump, 12V - 1354503 - 23-56087F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outFlexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesRetrofits footprint of current offering: Provides a seamless transition for existing customersNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeIndustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failureTricuspid Check Valve: Helps prevent the water from backflowing through the pump GPH Ratings: With & Without Check Valve @ 13.6V
Attwood 56097 Tsunami T800 Mk2 Cartridge Bilge Pump, 24V - 1354868 - 23-56097F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outFlexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesRetrofits footprint of current offering: Provides a seamless transition for existing customersNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeIndustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failureTricuspid Check Valve: Helps prevent the water from backflowing through the pump GPH Ratings: With & Without Check Valve @ 13.6V
Attwood 56127 Tsunami T1200 Mk2 Cartridge Bilge Pump, 12V - 1355964 - 23-56127F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outFlexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesRetrofits footprint of current offering: Provides a seamless transition for existing customersNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeIndustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failureTricuspid Check Valve: Helps prevent the water from backflowing through the pump GPH Ratings: With & Without Check Valve @ 13.6V
Attwood 56137 Tsunami T1200 Mk2 Cartridge Bilge Pump, 24V - 1356329 - 23-56137F1
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outFlexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientationSingle-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat's hullExterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production linesRetrofits footprint of current offering: Provides a seamless transition for existing customersNo Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridgeIndustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failureTricuspid Check Valve: Helps prevent the water from backflowing through the pump GPH Ratings: With & Without Check Valve @ 13.6V
Attwood 56206 Tsunami T500 Mk2 Replacement Motor Cartridge, 12V - 1358856 - 23-56206F1
Replacement Motor Cartridge for Tsunami Mk2 Pumps. Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outindustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failure
Attwood 56226 Tsunami T800 Mk2 Replacement Motor Cartridge, 12V - 1359586 - 23-56226F1
Replacement Motor Cartridge for Tsunami Mk2 Pumps. Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outindustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failure
Attwood 56246 Tsunami T1200 Mk2 Replacement Motor Cartridge, 12V - 1360317 - 23-56246F1
Replacement Motor Cartridge for Tsunami Mk2 Pumps. Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn outindustry's Best Motor and Shaft Seals: Provides better protection against harmful corrosion that in any other instance could cause failure
Attwood 56404 Tsunami Mk 2 Cartridge Aerator Pump, Long Straight Inlet - 1366100 - 23-56404F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56434 Tsunami Mk 2 Cartridge Aerator Pump, Short Straight Inlet - 1367195 - 23-56434F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56444 Tsunami Mk 2 Cartridge Aerator Pump, 90° Inlet - 1367561 - 23-56444F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56504 Tsunami Mk 2 Cartridge Aerator Pump, Long Straight Inlet - 1369752 - 23-56504F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56534 Tsunami Mk 2 Cartridge Aerator Pump, Short Straight Inlet - 1370848 - 23-56534F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56544 Tsunami Mk 2 Cartridge Aerator Pump, 90° Inlet - 1371213 - 23-56544F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56604 Tsunami Mk 2 Cartridge Aerator Pump, Long Straight Inlet - 1373405 - 23-56604F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56634 Tsunami Mk 2 Cartridge Aerator Pump, Short Straight Inlet - 1374500 - 23-56634F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 56644 Tsunami Mk 2 Cartridge Aerator Pump, 90° Inlet - 1374866 - 23-56644F1
Keep your bait and fish alive with the Tsunami Aerator Mk2.The Mk2 provides more options, faster, easier service and installation, greater durability, and consistent product performance. Faster & Easier Serviceability - True single-handed serviceable motor cartridge with improved gripBackwards Cartridge Compatibility - Cartridges are compatible with previous Tsunami modelsIP Rating: IP68Ignition Protection Standards: ISO 8846 Marine
Attwood 6522Ss7 Stainless Led Docking Lights, 2.8" X 4.5" - 6522Ss7 - 23-6522Ss7F1
LED docking lights draw a fraction of the power while producing a brighter output. Performs like a true "docking light" instead of a narrow-beam headlight. White LED light stays cool to the touch. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. Low-profile lights are designed to be surface mounted and are easy to install. No hole saw needed - only a small hole for wiring and a few screws for attachment required. Long lasting and backed by a 10-year warranty.
Attwood 6523Bk7 Black Led Docking Lights, 2.8" X 4.5" - 6523Bk7 - 23-6523Bk7F1
LED docking lights draw a fraction of the power while producing a brighter output. Performs like a true "docking light" instead of a narrow-beam headlight. White LED light stays cool to the touch. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. Low-profile lights are designed to be surface mounted and are easy to install. No hole saw needed - only a small hole for wiring and a few screws for attachment required. Long lasting and backed by a 10-year warranty.
Attwood 65267 1" Threaded Docking Lights - 1689795 - 23-65267F1
Makes docking boats easy with cool white 100 Lumen output. Designed for convenient installation on the front of pontoons or similar applications. Also great as a utility light, to illuminate working areas, or on the stern to illuminate swim platforms. Requires 7/8" mounting hole.
Attwood 65277 1" Clip Mount Docking Lights - 1690160 - 23-65277F1
Makes docking boats easy with cool white 100 Lumen output. Designed for convenient installation on the front of pontoons or similar applications. Also great as a utility light, to illuminate working areas, or on the stern to illuminate swim platforms. Requires 7/8" mounting hole.
Attwood 6528B7 Led Base Underwater Lights, Blue - 6528B-7 - 23-6528B7F1
These LED lights create a dynamic appearance whether above or below the waterline. Each light has six vibrant LED lamps.
Attwood 6528W7 Led Base Underwater Lights, White - 6528W-7 - 23-6528W7F1
These LED lights create a dynamic appearance whether above or below the waterline. Each light has six vibrant LED lamps.
Attwood 65Uw03B7 Lightarmor™ Underwater Light 4" Blue - 65Uw03B-7 - 23-65Uw03B7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw03G7 Lightarmor™ Underwater Light 4" Green - 65Uw03G-7 - 23-65Uw03G7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw03W7 Lightarmor™ Underwater Light 4" White - 65Uw03W-7 - 23-65Uw03W7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw06B7 Lightarmor™ Underwater Light 5" Blue - 65Uw06B-7 - 23-65Uw06B7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw06G7 Lightarmor™ Underwater Light 5" Green - 65Uw06G-7 - 23-65Uw06G7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw06W7 Lightarmor™ Underwater Light 5" White - 65Uw06W-7 - 23-65Uw06W7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw12B7 Lightarmor™ Underwater Light 6" Blue - 65Uw12B-7 - 23-65Uw12B7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 65Uw12W7 Lightarmor™ Underwater Light 6" White - 65Uw12W-7 - 23-65Uw12W7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 66Uw03B7 Lightarmor™ Underwater Light 4" Blue - 66Uw03B-7 - 23-66Uw03B7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 66Uw06B7 Lightarmor™ Underwater Light 5" Blue - 66Uw06B-7 - 23-66Uw06B7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 66Uw12B7 Lightarmor™ Underwater Light 6" Blue - 66Uw12B-7 - 23-66Uw12B7F1
Exclusive Heat-Sync Cooling System with Active Overheat ProtectionResistant to corrosion, chemicals, and UV DamageExtreme impact-resistant lens3" sheathed wireReverse polarity protectionFully-sealed waterproof electronicsSimple installationLow-profile design
Attwood 7 To 4 Way Trailer Plug Adapter - 14135-7 - 23-141357F1
Connects 4-way trailer wiring harness to a vehicle through the connection of a trailer adapter. Connects auxiliary, tail lights and ground left right and stop.
Attwood 7 To 5 Way Trailer Plug Adapter - 14134-7 - 23-141347F1
Connects 5-way trailer wiring harness to a vehicle through the connection of a trailer adapter. Connects auxiliary, tail lights and ground left right and stop.
Attwood 7615A3 3-Way Bilge Pump Switch - 7615A3 - 23-7615A3F1
For use on automatic pumps or pumps with float switch. Water resistant rocker switch. Not external ignition protected. 1/4" spade terminals.
Attwood 76237 Circuit Breaker, 50 Amp - 2090466 - 23-76237F1
Protects trolling motors, or anything else electrical in your boat, from damage caused by overload or a short circuit.
Attwood 76403 Heavy Duty Utility Snap Hook, 4" - 2096554 - 23-76403F1
Zinc-plated steel with spring-loaded closures.
Attwood 7653L3 Light Duty Utility Snap Hook, 4" - 7653L3 - 23-7653L3F1
Zinc-plated steel with spring-loaded closures.
Attwood 7812-S-7 12" 3Nm Anchor Masthead Light With Stainless Steel Lightarmor Base - 7812-S-7 - 23-7812S7F1
3-mile, 360° illumination. USCG certified for use on freshwater and saltwater boats up to 65.6' (20m). Simple, sealed, one-piece lens. Concealed, protected wiring at the base. Uses two festoon-style 8-watt lamps. Easy to install, requires (2) #10 S.S. screws. Will collapse and not break if accidentally hit. Includes a LightArmor™ horizontal base and is packaged with a rail mount adapter (#91367).
Attwood 8 Gauge Red And Black Wire 20' Set - 14361-5 - 23-143615F1
Premium marine grade copper wire, for installing trolling motors and electric winches. Stranded copper core is flexible for easy installation and allows the most current for quick starting. PVC insulation in the wire is resistant to cracking, abrasion, weather, oil, and acids.
Attwood 8806Lp2S Fuel Tank Epa Compliant 6 Gallon Without Gauge - 8806Lp2S - 23-8806Lp2Sf1
EPA/CARB COMPLIANTFuel tanks are constructed of high-impact molded plastic. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatible with 1/4" NPT fittings.
Attwood 8806Lpg2S Fuel Tank Epa Compliant 6 Gallon With Gauge - 8806Lpg2S - 23-8806Lpg2Sf1
EPA/CARB COMPLIANTFuel tanks are constructed of high-impact molded plastic. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatible with 1/4" NPT fittings.
Attwood 8838Hm6 Universal Sprayless Connector - Male Hose Fitting W/Pre-Applied Thread Sealant - 8838Hm6 - 23-8838Hm6F1
The Universal Sprayless Connector is a safe way to eliminate the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. It replaces traditional tank fittings and eliminates spray when connecting or disconnecting fuel fittings. It also comes with a pre-applied fuel grade thread sealant for added convenience. Compatible with Ethanol blended fuels. 2 Year Warranty.Male connector for use on 5/16" - 3/8" marine fuel hose.
Attwood 8838Tm6 Universal Sprayless Connector - Male Tank Fitting W/Pre-Applied Thread Sealant - 8838Tm6 - 23-8838Tm6F1
The Universal Sprayless Connector is a safe way to eliminate the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. It replaces traditional tank fittings and eliminates spray when connecting or disconnecting fuel fittings. It also comes with a pre-applied fuel grade thread sealant for added convenience. Compatible with Ethanol blended fuels. 2 Year Warranty.Male connector for use on marine fuel tanks with 1/4" fittings.
Attwood 8838Us6 Universal Sprayless Connector Set W/O Sealant - 8838Us6 - 23-8838Us6F1
The Universal Sprayless Connector is a safe way to eliminate the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. It replaces traditional tank fittings and eliminates spray when connecting or disconnecting fuel fittings. It also comes with a pre-applied fuel grade thread sealant for added convenience. Compatible with Ethanol blended fuels. Female hose fitting compatible with 3/8" and 5/16" fuel lines. 2 Year Warranty.8838US6 kit Includes: Male and female connections for use on marine fuel tanks with 1/4" fittings.
Attwood 90651 Standard Vented Battery Box For Group 24/24M, Black - 2616965 - 23-90651F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 90671 Power Guard Battery Box, Black, Fits Group 27M - 2617695 - 23-90671F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 90707 Powerguard Pro Battery Box, Group 24/27 - 9070-7-Ir - 23-90707F1
Water Resistant Ventilation: Top facing ventilation minimizes water in-take through engineered spill channels, directing rain/ splash away from batteries Polypropylene Composite: Polypropylene composite provides vital durability needed to support heavy lead battery cells, while resisting any run-off and UV discolorationFolding Terminal Entry Panels: Easily run terminal connected wires through folding terminal access panels, without the need to remove mounting strapSnap-Lock Lid Design: Locking lid provides peace of mind that lid will remain secure even under the most extreme conditionsFree-Play Reduction Blocks: Free-Play Reduction Blocks help ensure that 24 series battery cells are kept secure within the box, reducing damage to box and battery alikeReinforced Mounting Hardware: Mounting hardware consists of durable steel mounting feet and reinforced buckled strap to ensure box doesn't shift under heavy wave conditionsBi-Directional Design: Terminal Access Panels are positioned on either side of the box, allowing for maximum battery accessErgonomically Designed Handles: Ergonomic handles allow for easy transportation on and off vessels, trailers, and more
Attwood 90821 Standard Battery Box, Black, Vented - Fits Group 16 - 2623174 - 23-90821F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.For smaller batteries like Series 16 and those used in Jet skis and lawn equipment.
Attwood 90841 Large Battery Box, Black, Vented - Fits Group 29/31 - 2623904 - 23-90841F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 91017B7 Replacement Frosted Globe For All-Round Lights - 91017B7 - 23-91017B7F1
Spare Globe
Attwood 935311 Softside Dock Fender, Corner, 11-3/4" X 11-3/4" X 4-1/2", (4) 5/16" Mount Holes - 93531-1 - 23-935311F1
Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing. Sold in a display cartonGuaranteed for life
Attwood 935321 Softside Dock Fender, Straight-Edge, 18" X 3-1/2" X 4-1/2", (3) 5/16" Mount Holes - 93532-1 - 23-935321F1
Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing. Sold in a display cartonGuaranteed for life
Attwood 935331 Softside Round Dock Fender, Slide-On Post, 7" X 15" - 93533-1 - 23-935331F1
Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing. Double-molded eye ends for extra strength. Seamless one-piece construction. Sold in a PDQ display carton for easy retail displayGuaranteed for lifeMade in the U.S.A.
Attwood 935341 Softside Round Dock Fender, Corner, 7" X 15" - 93534-1 - 23-935341F1
Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing. Double-molded eye ends for extra strength. Seamless one-piece construction. Sold in a PDQ display carton for easy retail displayGuaranteed for lifeMade in the U.S.A.
Attwood 935361 Softside Pontoon Fender, White - 93536-1 - 23-935361F1
The SoftSide Pontoon Fender is uniquely shaped to provide protection from the edge of the boat deck to the widest point of the pontoon, minimizing contact damage to the boat and dock. The fender slips easily underneath the deck edge and secures between it and the top of the pontoon. Included side-loop strap can be used to mount fender more securely, but is not required. Fender rests securely between boat deck edge and pontoonIncluded mounting strap helps provide secure fitLifetime guarantee against chalking, splitting, marring, deflating and crushingUV-resistant
Attwood 935371 Softside Dock Fender, White, Sold Each, 4/Case - 93537-1 - 23-935371F1
Molded from light weight composite - soft to the touch, easy on hulls Lifetime guarantee against chalking, splitting and crushingNo leaking air valvesSimple installation on wood and aluminum docks
Attwood 98395Gy Low Back Fold Down Fishing Seat, Gray - 98395Gy - 23-98395Gyf1
This seat features a high impact plastic frame, aluminum hinges, UV resistant and easy to clean vinyl, standard seat hole mounting pattern. 7" W x 16" D x 16" HABYC: B
Attwood 98505Ca Casting Seat, Camo - 98505Ca - 23-98505Caf1
Ergonomic foam paddingDurable high impact plastic base (no wood)Fits all standard seat mountsSize: 11" L x 15" W x 6" H
Attwood 98505Wh Casting Seat, White - 98505Wh - 23-98505Whf1
Ergonomic foam paddingDurable high impact plastic base (no wood)Fits all standard seat mountsSize: 11" L x 15" W x 6" H
Attwood 99C0451S Vent Line Carbon Canister - 99Cc045-1S - 23-99Cc0451Sf1
99C0451S: Trailerable Vessel Capacity: 70 Gal. Non-Trailerable Vessel Capacity: 110 Gal. Fits 5/8" vent hoseCan be mounted in any orientation using brackets providedCompatible with Ethanol blended fuelsLow permeation shell reduces overall system emissionsCarbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation
Attwood 99Cc0851S Vent Line Carbon Canister - 99Cc085-1S - 23-99Cc0851Sf1
99CC0851S: Trailerable Vessel Capacity: 220 Gal. Non-Trailerable Vessel Capacity: 350 Gal. Fits 5/8" vent hoseCan be mounted in any orientation using brackets providedCompatible with Ethanol blended fuelsLow permeation shell reduces overall system emissionsCarbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation
Attwood 99Cc085Hsa1S Vent Line Carbon Canister - 99Cc085Hsa1S - 23-99Cc085Hsa1Sf1
99CC085HSA1S: Trailerable Vessel Capacity: 220 Gal. Non-Trailerable Vessel Capacity: 350 Gal. Fits 5/8" vent hoseCan be mounted in any orientation using brackets providedCompatible with Ethanol blended fuelsLow permeation shell reduces overall system emissionsCarbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation
Attwood 99Dfccas1S Angled Deck Fill For Carbon Canister Systems, Stainless Cap - 99Dfccas1S - 23-99Dfccas1Sf1
Dual 1 psi overpressure relief safety valves built into the capAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuels
Attwood 99Dfccss1S Straight Deck Fill For Carbon Canister Systems, Stainless Cap - 99Dfccss1S - 23-99Dfccss1Sf1
Dual 1 psi overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuels
Attwood 99Dfpvab1S Angled Gas Deck Fill For Pressure Release Systems, Black Plastic Cap - 99Dfpvab1S - 23-99Dfpvab1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Dfpvas1S Angled Gas Deck Fill For Pressure Release Systems, Stainless Cap - 99Dfpvas1S - 23-99Dfpvas1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Dfpvsb1S Straight Gas Deck Fill For Pressure Release Systems, Black Plastic Cap - 99Dfpvsb1S - 23-99Dfpvsb1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Dfpvss1S Straight Gas Deck Fill For Pressure Release Systems, Stainless Cap - 99Dfpvss1S - 23-99Dfpvss1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Flb1001S Fill Limit Vent Valve With Grv Communication, 1.0" Shut-Off, Green - 99Flb100-1S - 23-99Flb1001Sf1
Sets the full level of fuel in the tank Prevents liquid fuel from reaching the carbon canister or vent system during vessel operation, trailering and storageCompatible with Ethanol blended fuels and plastic and aluminum tanksPasses all USCG CFR 33 and ABYC H-24 fire test requirements and CARB and EPA requirementsIntegrated high-performance gasket includedAssembly Guide aligns the FLVV and gasket with tank for faster installation
Attwood 99Flb1401S Fill Limit Vent Valve With Grv Communication, 1.4" Shut-Off, Grey - 99Flb140-1S - 23-99Flb1401Sf1
Sets the full level of fuel in the tank Prevents liquid fuel from reaching the carbon canister or vent system during vessel operation, trailering and storageCompatible with Ethanol blended fuels and plastic and aluminum tanksPasses all USCG CFR 33 and ABYC H-24 fire test requirements and CARB and EPA requirementsIntegrated high-performance gasket includedAssembly Guide aligns the FLVV and gasket with tank for faster installation
Attwood 99Flb3301S Fill Limit Vent Valve With Grv Communication, 3.3" Shut-Off, Black - 99Flb330-1S - 23-99Flb3301Sf1
Sets the full level of fuel in the tank Prevents liquid fuel from reaching the carbon canister or vent system during vessel operation, trailering and storageCompatible with Ethanol blended fuels and plastic and aluminum tanksPasses all USCG CFR 33 and ABYC H-24 fire test requirements and CARB and EPA requirementsIntegrated high-performance gasket includedAssembly Guide aligns the FLVV and gasket with tank for faster installation
Attwood Abs Plastic Rod Holder Black - 12701-5 - 23-127015F1
30° AngleDurable plastic construction. Fits: Rod grips under 1-1/2" diameter.Fasteners: #10
Attwood Acetal Connector 3/4"-14 Npsm To 3/4" I.D. Hose Fitting, White - 730181 - 23-38993F1
Threaded end fits 3888 drain fitting or A-Series aerator pump intakes and outlets. Acetal construction.
Attwood Adjustable Rod Holder With Bi-Axis Mount-Black - 1135631 - 23-50094F1
Features a superior ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting and spinning rods. Includes Bi-Axis mount. This design offers an improved fit with positive lock for secure rod holder mounting. Can be mounted on side or top of gunwale. Compatible with all Attwood and other leading rod holder mounting patterns.
Attwood Adjustable Rod Holder With Bi-Axis Mount-White - 5009W4 - 23-5009W4F1
Features a superior ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting and spinning rods. Includes Bi-Axis mount. This design offers an improved fit with positive lock for secure rod holder mounting. Can be mounted on side or top of gunwale. Compatible with all Attwood and other leading rod holder mounting patterns.
Attwood Aerator Remote Mounting Bracket 3/4" - 811630 - 23-41223F1
For mounting the aerator pump to a base, away from the transom.
Attwood Aerator Spray Head Adjustable - 812848 - 23-41257F1
Use on livewells that have built-in overflows or recirculating systems. Mounts on side of tank. 90° fitting for installation in tight spaces. Rotating head with O-ring adjusts and maintains flow setting. Removable head. Polypropylene construction. Maximum tank thickness: 5/8".
Attwood All Plastic Heavy Duty Battery Tray - 2628773 - 23-90975F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood All Plastic Heavy Duty Battery Tray - 2629138 - 23-90985F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood All-Round Light With Folding Pole 54" - 5340-54-7 - 23-5340547F1
Two-mile, 360° visibility, for boats up to 39.4' (12 m) length. Since all-round lights must be at least one meter (39-3/8") above sidelights, some boats require a long light pole. The removable pole folds in half for easy stowage. 2-pin locking-collar pole. 9-watt wedge-base lamp. Anti-glare lens focus at the horizon and above, not in the driver's eyes.
Attwood All-Round Pole Light With Fixed Base 8",Globe Style - 1177031 - 23-5122087F1
Two-mile, 360° light visibility for use on boats up to 39.4 ft. (12 meters). Fixed base for use on pontoons, hard tops, and radar arches. Aluminum pole. Base dimensions: 2-1/2" L x 1" W. Includes 9-watt wedge base lamp.
Attwood Aluminum Paddle 4', Camo - 11759-1 - 23-117591F1
Designed for the outdoorsman and hunter. Aluminum shaft. padded grips.
Attwood Articulating All-Round Pole Light, 42" - 5330-42-7 - 23-5330427F1
Two-mile, 360° visibility, for boats up to 39.4' (12 meter) in length. The articulating light simplifies installation. The 2-pin locking-collar pole allows installation in 95% of existing bases (Attwood & competitors). Articulating head adjusts 15° fore or aft to fit all base angles. 9-watt wedge-base lamp. Anti-glare lens focus at the horizon and above, not in the driver's eyes.
Attwood Articulating All-Round Pole Light, 48" - 5330-48-7 - 23-5330487F1
Two-mile, 360° visibility, for boats up to 39.4' (12 meter) in length. The articulating light simplifies installation. The 2-pin locking-collar pole allows installation in 95% of existing bases (Attwood & competitors). Articulating head adjusts 15° fore or aft to fit all base angles. 9-watt wedge-base lamp. Anti-glare lens focus at the horizon and above, not in the driver's eyes.
Attwood Battery Box Strap Only Black Woven Polypropylene 54" - 9014A3 - 23-9014A3F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Selector Switch 4 Way - 14230-3 - 23-142303F1
Single-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two batteries in parallel, or both off. Rated for 300-amps continuous at 6 VDC, 150-amps continuous at 12 VDC. For 6-Volt to 32-Volt D.C. systems. Includes alternator field circuit disconnect to allows switching while the engine is running. Selector has positive click positions. Bakelite housing with brass terminals and brass nuts. Install with #10 screws. 1, 2, Both, Off.
Attwood Battery Strap Kit 38" Fits 90651 And 90671 - 2598031 - 23-90133F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Strap Kit 54" Fits 9084 - 9013A3 - 23-9013A3F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Switch 12 To 50V Dc On/Off - 14233-7 - 23-142337F1
Compact, heavy-duty battery switch with removable control knob to deter theft. 200 Amps Continuous / 300 Amps Intermittent / on-off-separateErgonomic gripsRemovable walls for easy
Attwood Bi-Color Deck Mount Light, Stainless Steel - 66318-7 - 23-663187F1
Stainless steel. Provides 1-mile visibility for boats up to 39.4' in length. Includes 8-watt lamp. Installs with (3) #6 fasteners (not included). Combination light: 225° visibility.Size: 2-1/2" L x 2-1/4" W x 1-1/2" H.
Attwood Boat Cover Support Pole 28-48" - 10704-5 - 23-107045F1
1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends.
Attwood Boat Cover Support Pole 36-64" - 10705-5 - 23-107055F1
1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends.
Attwood Bow Eye U-Bolt 1/2"-13 X 3-1/4" - 545004 - 23-33923F1
Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.
Attwood Bow Eye U-Bolt 3/8"-16 X 2-7/16" - 546465 - 23-33963F1
Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.
Attwood Bow Eye U-Bolt Stainless Steel 1/2-13 X 3-1/4" - 66261L3 - 23-66261L3F1
Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.
Attwood Brass Snap-Handle Drain Plug Without Chain - 7524A7 - 23-7524A7F1
Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.
Attwood Cast Bronze Garboard Drain Plug 1/2" Npt - 2065507 - 23-75553F1
Provides bilge drainage when hauling out. Nut removes with wrench or pliers. Machined, tapered pipe threads ensure watertight plug fit. 3/8" neck depth. Three countersunk holes for #8 screws.
Attwood Casting Seat, Gray - 98505Gy - 23-98505Gyf1
Ergonomic foam padding Durable high impact plastic base (no wood)Fits all standard seat mountsUniversal 5" x 5" (12.7 cm x 12.7 cm) mounting pattern
Attwood Clamp-On Rail Base For Sure Grip Rod Holder - 1159341 - 23-50743F1
Fit a variety of mounting surfaces including rails. Constructed of extruded aluminum.
Attwood Cleat Cast Aluminum 4-1/2" - 12121-3 - 23-121213F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Cast Aluminum 6" - 12125-3 - 23-121253F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Cast Aluminum 8" - 12127-3 - 23-121273F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Hollow Base 6" - 66009L6 - 23-66009L6F1
Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Cleat Hollow Base 8" - 66010L3 - 23-66010L3F1
Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Cleat Nylon 6-1/2" - 12112-1 - 23-121121F1
Corrosion-resistant economical cleat Two holes for required fastenersUV-resistant
Attwood Collector Box For 1423,1424,1425,1426,1494,1496A - 1341-1 - 23-13411F1
Cut-outs for two 3' I.D. hoses. Corrosion-resistant plastic. For use w/plastic venturi, flush louvered, or trimline vent.
Attwood Collector Box For 1495 Vent - 1345-1 - 23-13451F1
Use with plastic louvered vent, with two 3" I.D. wire supported ventilation hoses. Box fastens to vent with screws or pop rivets, vent then fastens to the deck. Corrosion-resistant plastic.
Attwood Cowl Ventilator 6" - 1364A3 - 23-1364A3F1
Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Chrome-plated zinc. Flange is non corrosive plastic. Installs with #8 fasteners.
Attwood Deck Fill Replacement Cap For 66126, Stainless Steel - 66061-3 - 23-660613F1
316 Stainless Steel. Attached with stainless steel beaded chain.
Attwood Deck Fill Replacement Cap For 66406, 66408, 66408C1, Stainless Steel - 66074-3 - 23-660743F1
316 Stainless Steel. Attached with stainless steel beaded chain.
Attwood Deck Plate 6" White - 12792-1 - 23-127921F1
Allows additional storage options to your canoe, kayak or small boat access unusable spaces and for inspection of and general access to valves and deck vents. Easy opening, screw-out design - no tools required. High-impact ABS plastic with textured surface. Durable, rugged, weather-resistant. Flange is pre-drilled for #8 screws.
Attwood Deluxe Anchor Lift 'N Lock Control - 13702-4 - 23-137024F1
High impact, reinforced nylon anchor lift and pulley with stainless steel shaft and protective black cover. Easy pull up, lock and release. Supports up to a 20 lb. anchor with 1/4" to 7/16" diameter rope.
Attwood Deluxe Boat Cover Support System For Boats Up To 19' - 10795-4 - 23-107954F1
One of the best cover support systems on the market. Easily adjustable boat cover support keeps water from accumulating in center of cover. Extends the life of the cover by as much as 50%.Telescoping center pole (28" - 48"), poly web straps, and bow spreader form a double ridge line under the cover. Pole rests on a rubber foot and the web straps attach to the stern with non-marring hooks. Aluminum pole: 1" diameterPoly web straps: 1" wide, black
Attwood Door Hinge Cast Stainless Steel 4"L X 1-1/2"W (Pair) - 66029-3 - 23-660293F1
Cast stainless steel w/six holes.
Attwood Double Braid Mfp Dock Line, 3/8" X 15', Blue - 11702-7 - 23-117027F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel with one end spliced.
Attwood Epa Compliant Fuel Tank, 12 Gal. W/O Gauge - 8812Lp2 - 23-8812Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Epa Compliant Fuel Tank, 3 Gal. W/O Gauge - 8803Lp2 - 23-8803Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Epa Compliant Fuel Tank, 6 Gal. W/O Gauge, 2 Pack - 8806Lp2 - 23-8806Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.Priced individually, sold in packs of 2 only.
Attwood Fender, 4" X 16", Blue - 9354Bd1 - 23-9354Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 4" X 16", White - 9354D1 - 23-9354D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", Blue - 9355Bd1 - 23-9355Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", White - 9355D1 - 23-9355D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", Blue - 9356Bd1 - 23-9356Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", White - 9356D1 - 23-9356D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", Blue - 9358B1 - 23-9358B1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", White - 2723981 - 23-93581F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Flat Gas Spring Mounting Bracket Ball Pem Forward 2 Holes Stainless Steel - Sl40Ssp3-7 - 23-Sl40Ssp37F1
Mounting bracket: pem type: Ball 10mm. direction forward.
Attwood Flexible Grab Handle - 58927 - 23-20615F1
Flexible grab handles for flush, flexible mounting. They can be mounted to a variety of irregular surfaces and angles on swim platforms, cockpits and companionways. Constructed from soft polypropylene webbing over a semi-rigid core. Available with or without an over-molded grip. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might impact them. They meet the ABYC H-41 standard for strength: withstand a load of 400 lbs. in any direction. All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.
Attwood Flush Base For Sure Grip Rod Holder - 1158245 - 23-50713F1
Fit a variety of mounting surfaces including rails Constructed of extruded aluminum
Attwood Flush Cleat 4-1/2" - 66512-7 - 23-665127F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2", Counter-Sunk - 66510-7 - 23-665107F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 6" - 66516-7 - 23-665167F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 8" - 66524-1 - 23-665241F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Hinge, Square End, Stamped Stainless Steel 2-3/4" X 1-9/16" - 66239-3 - 23-662393F1
Unique double stud design allows for a flush installation while providing a full 180° swing. This makes them the perfect hinge for lazzerette or fish box covers in the cockpit sole. Made of solid stamped stainless steel.
Attwood Flush Mount Transom Light Round - 6356D7 - 23-6356D7F1
Stainless steel with plastic body and watertight lamp socket. Provide 2-mile visibility for craft up to 164' in length. 7-1/2 watt lamp and two stainless steel #10 screws included. Model 6356 has a translucent back so it can also be used to light an interior compartment. Uses #90 replacement bulb.
Attwood Fold Down Aluminum Dock Cleat, 6" - 12048-4 - 23-120484F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Down Aluminum Dock Cleat, 8" - 12049-4 - 23-120494F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Up Drink Holder Black - 199241 - 23-24457F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Drink Holder White - 200702 - 23-24497F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Trailer Jack, 1000 Lb. - 23-111274 - 23-111274F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fold Up Trailer Jack, 1500 Lb. - 11126-4 - 23-111264F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fuel Connector For Chrysler/Force Nickel Plated Brass 5/16" Barb - 2551008 - 23-88846F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Molded Acetal 3/8" Barb - 2556851 - 23-89006F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 1/4" Npt - 2557216 - 23-89016F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 3/8" Barb - 2557581 - 23-89026F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 1/4" Npt - 14530-6 - 23-145306F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 3/8" Barb - 14534-6 - 23-145346F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector Universal, Brass For 3/8" Hose, 1/4" Npt - 14540-6 - 23-145406F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Attwood Fuel Line Hose Kit 3/8" X 6' For Evinrude - 93806Elp7 - 23-93806Elp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' For Mercury 1998 And Older - 93812Ulp7 - 23-93812Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' For Yamaha - 93806Ylp7 - 23-93806Ylp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Evinrude - 93806Eusd7 - 23-93806Eusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Mercury - 93806Musd7 - 23-93806Musd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' - 93806Ulp7 - 23-93806Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' With Fuel Demand Valve And Sprayless Connector - 93806Uusd7 - 23-93806Uusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit Universal 5/16" X 6' - 951606Ulp7 - 23-951606Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Force 3/8" X 6' - 93806Fus7 - 23-93806Fus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Honda 3/8" X 6' - 93806Hus7 - 23-93806Hus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Mercury Pre 1998 3/8" X 6' - 93806Aus7 - 23-93806Aus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Surge Protector For 5/8" Hose - 1675-6 - 23-16756F1
Meets ABYC Standards. Helps avoid fuel spills because the surge helps automatic fuel nozzles shut off as the tank fills. Glass-filled polypropylene construction and surge-ball design. Withstands oil, gas, and alcohol-blended fuels. Compact size allows installation inside gunwale in any orientation within 45° of vertical. Includes two hose clamps.
Attwood Fuel Tank Epa Compliant 12 Gallon With Gauge - 8812Lpg2 - 23-8812Lpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of high -impact molded plastic. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Fuel Tank Epa Compliant 3 Gallon With Gauge - 8803Lpg2 - 23-8803Lpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Fuel Tank Epa Compliant 6 Gallon With Gauge, 2 Pack - 8806Lpg2 - 23-8806Lpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.Priced individually, sold in packs of 2 only.
Attwood Fuel Tank Vent 90 Degree Flush Mount For 5/8" Hose Stainless Steel - 1674-6 - 23-16746F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent 90 Degree Standard Mount For 5/8" Hose Black - 1670-3 - 23-16703F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent 90 Degree Standard Mount For 5/8" Hose White - 1671-1 - 23-16711F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent Black - 1607-3 - 23-16073F1
Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations.
Attwood Fuel Tank Vent Flush Mount - Straight - 66031-3 - 23-660313F1
316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets.
Attwood Fuel Tank Vent Flush Mount 90 Degree - 66032-3 - 23-660323F1
316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets.
Attwood Fuel Tank Vent Standard Mount For 5/8" Hose 90 Degree Stainless Steel - 66419-3 - 23-664193F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Funnel, Short Rigid With Handle - 14582-1 - 23-145821F1
The filter funnel features fine mesh filters that filter out most foreign particles. Non-splashing. Lightweight floating polyethylene plastic construction.
Attwood Gas Deck Fill For 1-1/2" Hose, Stainless Steel - 66406-5 - 23-664065F1
316 stainless steel for 1-1/2" hose. Imprinted with "Gasoline". Flush cap is slotted for a key and is O-ring sealed. Cap is attached by a SS beaded chain. 3-1/4" long fill neck.
Attwood Gimbaled Drink Holder Black - 11635-4 - 23-116354F1
Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining.
Attwood Gimbaled Drink Holder White - 11631-4 - 23-116314F1
Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining.
Attwood Hatch Hinge Stainless Steel, Open Size 3-1/2" X 1-3/8" - 66027-3 - 23-660273F1
Stainless steel with removable pin so that hatches can be completely removed without removing hinges. Predrilled for 8 screws. Skin packed.
Attwood Hatch/Lift Spring Stainless Steel 8-3/4" - 12461-3 - 23-124613F1
Holds hatch or motor box open, bends to close. Flush mounting dimensions: 7/16" diameter spring x 8-3/4" long predrilled for #8 screws. Stainless steel.
Attwood Heavy Duty Battery Tray For Group 24/24 - 2628408 - 23-90965F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 27 - 2628042 - 23-90955F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 29/31 - 2627677 - 23-90945F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Bilge Pump 1700 Gph - 1033728 - 23-47304F1
Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty
Attwood Heavy Duty Bilge Pump 2000 Gph - 1044686 - 23-47604F1
Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty
Attwood Herreshoff Cleat Heavy Duty, 8" - 66110-3 - 23-661103F1
This heavy-duty herreshoff is a wider, taller, heavier version of the herreshoff cleat. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Hollow Base Cleat Die Cast Zamak With Chrome Finish 4-1/2" (2/Pk) - 1586767 - 23-62446F1
The clean lines and modern look of these cleats are in tune with styling of today's boats. Enhanced 316 Stainless Steel construction.
Attwood Hollow Braid Polypropylene Anchor Line W/Hook, 1/4" X 50' White - 11714-2 - 23-117142F1
Solid braided nylon offers a rope that has a strong round cord that will not flatten out which stays flexible throughout its life and have a soft hand. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals.
Attwood Large Flush Lift Ring, Chrome Plated Brass - 520532 - 23-33253F1
Chrome-plated brass. Provides strength for lifting large and heavy hatch covers.
Attwood Led Articulating All-Round Light - 5530-36A7 - 23-553036A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light - 5530-54A7 - 23-553054A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light - 5530-60A7 - 23-553060A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light, 24" - 5530-24A7 - 23-553024A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light, 48" - 5530-48A7 - 23-553048A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Folding Pole All-Round Light 54" - 5540-54A7 - 23-554054A7F1
Provides 2-mile, 360° visibility for boats up to 39.4 feet. 3 watts at 12VDC and rated for 50,000+ hours of use. LED lights are completely sealed and watertight. 10-year warranty. Compatible with both Attwood and Perko bases. Use with 2-pin locking collar pole.
Attwood Led Low-Profile Trailer Light Kit - 14064-7 - 23-140647F1
Complete kit includes: two multi-functional (stop/tail/turn) submersible low-profile LED trailer lights, license plate bracket, wiring harness, installation hardware, and instructions. Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
Attwood Led Multi-Function Sport Light, Grey - 14185Xfs-7 - 23-14185Xfs7F1
Durable, water-resistant multi-function light for fishing, boating, camping and more. Bright LED white flood light, red for night vision such as fishing, and ultraviolet to charge ultraviolet (UV) lures and fishing lines. Battery operated (six AA not included). Four mounting options. Includes a mount adapter that is compatible with an Attwood rod holder mount and a mounting clamp that fits up to 3-inches. Rotates 360° and flips forward and back.
Attwood Led Trailer Light Kit - 14065-7 - 23-140657F1
Complete kit includes two multi-functional (stop/tail/turn) submersible LED trailer lights, license plate bracket, wiring harness, installation hardware and instructions. For use with trailers under 80" wide. Conforms to U.S. FMVSS & Canadian CFMVSS standards
Attwood Lightarmor Bi-Color Led Deck Mount Light, 304 Stainless Steel - Nv2002Ss-7 - 23-Nv2002Ss7F1
Lights feature LightArmor intelligent engineering. Water resistant (IP rating 67) and feature a smaller footprint with refined styling. Tough PC/ABS HousingLED Light Engine ModuleSantoprene™ Gasket2 NM U.S.C.G. CertifiedMeet Domestic and Global Regulatory RequirementsCorrosion Resistant
Attwood Lightarmor Bi-Color Led Deck Mount Light, Black Composite - Nv2002Pb-7 - 23-Nv2002Pb7F1
Lights feature LightArmor intelligent engineering. Water resistant (IP rating 67) and feature a smaller footprint with refined styling. Tough PC/ABS HousingLED Light Engine ModuleFeature tell-tale indicatorsSantoprene™ Gasket2 NM U.S.C.G. CertifiedMeet Domestic and Global Regulatory RequirementsCorrosion Resistant
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 10" Angled - Nv6Lc1-10A7 - 23-Nv6Lc110A7F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 10" Straight W/Task Light - Nv6Lc2-10-7 - 23-Nv6Lc2107F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 14" Angled - Nv6Lc1-14A7 - 23-Nv6Lc114A7F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 14" Straight - Nv6Lc1-14-7 - 23-Nv6Lc1147F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most basesAvailable with a task light option
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 14" Straight W/Task Light - Nv6Lc2-14-7 - 23-Nv6Lc2147F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Led Deck Mount Side Light, Black, Port Side - Nv2012Pbr-7 - 23-Nv2012Pbr7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Black, Stainless Side - Nv2012Ssr-7 - 23-Nv2012Ssr7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Black, Starboard Side - Nv2012Pbg-7 - 23-Nv2012Pbg7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Stainless, Starboard Side - Nv2012Ssg-7 - 23-Nv2012Ssg7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Port Side Light, Oval - Nv4012Ssr-7 - 23-Nv4012Ssr7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Port Side Light, Round - Nv3012Ssr-7 - 23-Nv3012Ssr7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Starboard Side Light, Oval - Nv4012Ssg-7 - 23-Nv4012Ssg7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Starboard Side Light, Round - Nv3012Ssg-7 - 23-Nv3012Ssg7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor™ Plug-In Base - Rectangle Series, 3-Pin, 316 S.S. - 910V3Ss-7 - 23-910V3Ss7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Rectangle Series, 3-Pin, Black - 910V3Pb-7 - 23-910V3Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 2-Pin, 316 S.S. - 910R2Psb-7 - 23-910R2Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 2-Pin, Black - 910R2Pb-7 - 23-910R2Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 3-Pin, 316 S.S. - 910R3Psb-7 - 23-910R3Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 3-Pin, Black - 910R3Pb-7 - 23-910R3Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 2-Pin, 316 S.S. - 910T2Psb-7 - 23-910T2Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 2-Pin, Black - 910T2Pb-7 - 23-910T2Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 3-Pin, 316 S.S. - 910T3Psb-7 - 23-910T3Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 3-Pin, Black - 910T3Pb-7 - 23-910T3Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle - 7533A7 - 23-7533A7F1
Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.
Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle - 7534A3 - 23-7534A3F1
Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.
Attwood Louvered Vent Flush Mount-Black - 1423-5 - 23-14235F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent Flush Mount-White - 1425-5 - 23-14255F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent, Off White - 1495-1 - 23-14951F1
Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. For 3" I.D. ventilation system use with 13451 collector box. Installs with #8 fasteners. Dimensions: 17-7/8" L x 3-7/16" H x 3/4" D
Attwood Low Profile 12 Gallon Epa/Carb Compliant Fuel Tank - 8812Llp2 - 23-8812Llp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Low Profile 12 Gallon Epa/Carb Compliant Fuel Tank - 8812Llpg2 - 23-8812Llpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Molded Plastic Strainer Fits Aerator Inlet And 3886-1 Thru Hull - 725068 - 23-38853F1
A cetal plastic durable strainer to prevent debris from clogging baitwell drains and aerator pumps.
Attwood Navy Anchor 10 Lbs. - 2933995 - 23-99331F1
Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud.
Attwood Navy Anchor 15 Lbs. - 2934360 - 23-99341F1
Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud.
Attwood Navy Anchor 20 Lbs. - 2934725 - 23-99351F1
Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud.
Attwood Neat Cleat 4-1/2" - 66515-7 - 23-665157F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 6" - 66517-7 - 23-665177F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 8" - 66519-1 - 23-665191F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Non-Adjustable Aerator Spray Head, Single Valve, 3/4" Hose - 4118A5 - 23-4118A5F1
Single valve spray head. Constructed of ABS plastic. For output from an aerator pump into the livewell.
Attwood Nv6Lc114Bp7 Lightarmor™ Fast Action Bi-Color Led Pole Light, 14" W/2-Pin Locking Collar - Nv6Lc1-14Bp7 - 23-Nv6Lc114Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLED light engines last for 50,000 hoursThreaded Locking Collar fits securely with LightArmor Plug-In Light Bases5-year warranty
Attwood Nv6Lc214Bp7 Lightarmor™ Fast Action Bi-Color Led Pole Light, 14" W/3-Pin Locking Collar & Task Light - Nv6Lc2-14Bp7 - 23-Nv6Lc214Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLED light engines last for 50,000 hoursThreaded Locking Collar fits securely with LightArmor Plug-In Light Bases5-year warranty
Attwood Oar Locks Clamp On - 2646608 - 23-91463F1
Fits most popular oar sizes. Bright zinc-plated steel resists rust. No drilling necessary. Fastens securely to oar with one adjustable bolt.
Attwood Oval Hawse Pipe Stainless Steel - 66223-3 - 23-662233F1
316 Stainless Steel. Four holes for required #10 fasteners.
Attwood Polypropylene Double Ended Thru-Hull Connection For 3/4" Hose - 722511 - 23-38783F1
Double-ended thru-hull provides watertight transition through bulkheads or tanks. 5" overall length. Polypropylene construction.Note: Thru-Hull connectors are designed for installation above the water line only
Attwood Pontoon Storage Blocks (Set Of 4) - 11401-4 - 23-114014F1
Discover hassle-free storage with our lightweight and extra-strong pontoon blocks. Designed with special features for added stability and convenience, each storage block can hold up to 4,000 pounds. The bottom has a molded-in texture to ensure maximum grip on concrete or ground surfaces, while the pre-drilled holes make fastening or staking easy. Ergonomic hand-holds make carrying more comfortable. Drainage channels and holes prevent water from pooling against your pontoon. UV-resistant material for long-lasting durabilityContoured design fits the shape of a pontoonEasily stored by stacking or hangingMade in USA
Attwood Portable Led Spot Light - 11794-7 - 23-117947F1
Compact 5 Watt LED spot light can be stored most anywhere on the boat. Rated for 50-100,000 hours of life. Tough thermoplastic construction in safety yellow/black. Includes a 10' powercord and 12 volt "cigarette-style" adaptor plug with fuse.
Attwood Primer Bulb For 1/4" Hose - 93014Lp7 - 23-93014Lp7F1
EPA COMPLIANT / CARB CERTIFIEDMulti layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Attwood Pulsar Deck Mount Bi-Color Light, Black - 1148871 - 23-50457F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads. Install with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Visible 225°. Size: 2-3/8" Dia. x 1-7/16" H.
Attwood Pulsar Side Light Deck Mount Port - Red - 5040R7 - 23-5040R7F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.Size: 2-3/8" diameter x 1-7/16" vertical height.
Attwood Pulsar Side Light Deck Mount Starboard - Green - 5040G7 - 23-5040G7F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.Size: 2-3/8" diameter x 1-7/16" vertical height.
Attwood Pulsar Side Light, Raised Base, Green Lens - 5080G7 - 23-5080G7F1
Pulsar Sidelight w/Raised Base, Green
Attwood Pulsar Side Light, Raised Base, Red Lens - 5080R7 - 23-5080R7F1
Pulsar Sidelight w/Raised Base, Red
Attwood Push/Pull Switch Three-Position - 2079752 - 23-75943F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Push/Pull Switch Two-Position - 2068521 - 23-75636F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Quick Disconnect Seat Mount 6-1/4" Swivel - 11602D1 - 23-11602D1F1
Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.
Attwood Quick Disconnect Seat Mount 7" Swivel - 11603D1 - 23-11603D1F1
Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.
Attwood Rectangular Flush Hatch Pull - 46569 - 23-20277F1
The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
Attwood Replacement 360 Degree Globe For Series 6700 - 1762052 - 23-6724051F1
Replacement 360° Globe For Series 6700
Attwood Replacement Anti-Glare Lens For 3900 Series - 912021-7 - 23-9120217F1
Replacement Anti-Glare Lens For 3900 Series
Attwood Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340 - 912852-7 - 23-9128527F1
Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340
Attwood Replacement Cover For 1670 Fuel Tank Vent - 911526-1 - 23-9115261F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Rod Holder Combo Mount Black - 1136452 - 23-50117F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50227: Flush mount, mounts to gunwale or deck. Easy-open cover conceals fasteners and elastomeric liner seals water out. When closed, the low-profile, contoured design avoids snagging.50117/5011W7: Combo side/surface mount can be used on a vertical or horizontal surface or used with the 50127 rail adapter.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Rod Holder Flush Mount Black - 1140470 - 23-50227F1
Flush mount, interchangeable mounting base fits 2-in 1, Pro Series, and Mini Rigger fishing systems. Mounts to gunwale or deck. Easy-open cover conceals
Attwood Rod Holder Flush Mount Stainless Steel 0 Degree White Open End - 66364W7 - 23-66364W7F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 15 Degree Black Open End - 66363-7 - 23-663637F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 15 Degree White Open End - 66363W7 - 23-66363W7F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 30 Degree Black Closed End - 66470-7 - 23-664707F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Rail Mount For 3/4 To 1-1/4" Rails, Black - 1136818 - 23-50127F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Rod Storage Holder - 12750-6 - 23-127506F1
Holds up to 3 fishing rods. Closed cell foam insert protects rod. Mount vertical or horizontal. 8-3/4"L x 2-1/2" W.
Attwood Rubber Bow Roller, 3" - 11205-1 - 23-112051F1
Durable protective molded rubber bow rollers Non-marring prime rubber compound
Attwood Scupper Valve - 721781 - 23-38763F1
Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent water from entering. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation). Use as a replacement valve for 3881 thru-transom scupper.Caution: Thru-hull connectors are designed for installation above the water line only.
Attwood Side Lights Deck Mount, Stainless Steel - Green - 66319G7 - 23-66319G7F1
Stainless steel. Provide 1-mile visibility for boats up to 39.4' in length Includes 8-watt lamp. Installs with (3) #6 fasteners (not included)112.5° VisibilitySize: 2-1/2"L x 2-1/4"W x 1-1/2"H
Attwood Side Lights Deck Mount, Stainless Steel - Red - 66319R7 - 23-66319R7F1
Stainless steel. Provide 1-mile visibility for boats up to 39.4' in length Includes 8-watt lamp. Installs with (3) #6 fasteners (not included)112.5° VisibilitySize: 2-1/2"L x 2-1/4"W x 1-1/2"H
Attwood Sl1205 Gas Spring 10" Extended, 7" Compressed, Blade Style, 20 Lbs. - Sl1-20-5 - 23-Sl1205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl1405 Gas Spring 10" Extended, 7" Compressed, Blade Style, 40 Lbs. - Sl1-40-5 - 23-Sl1405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl2405 Gas Spring 15" Extended, 9.5" Compressed, Blade Style, 40 Lbs. - Sl2-40-5 - 23-Sl2405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl27100 Gas Spring 28" Extended, 16.5" Compressed, 100 Lbs. - Sl27-100-1 - 23-Sl27100 Superseded By: 23-Sl271001F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl30205 Gas Spring 10" Extended, 7" Compressed, 20 Lbs. - Sl30-20-5 - 23-Sl30205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
