Select Category
Brands
Paint Phantom Blk@6 Canadaonly S/S<92-802878Q 1 - - 710-92-8M0152312F1
Paint Pntm Blk Cs/6 Sold As Each Cs Is 6 - 802878Q1 - 710-92-802878Q1F1
Paint Prep System Cups & Collar Std (2/Bx) - 16001 - 71-16001F1
Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360°, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.Liners sold separately.
Paint Prep System Large Cup & Collar 1/Bx - 16023 - 71-16023F1
Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360°, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.Liners sold separately.
Paint Prep System Mini Cups & Collars - 16115 - 71-16115F1
Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360°, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.Liners sold separately.
Paint Primer @6 - 802878Q52 - 710-92-802878Q52F1
340 g (12 oz) spray can Priced individually, Sold in case packs only
Paint Primer @6 Canada Only Ss<92-802878Q52 - - 710-92-8M0224328F1
Paint Strainer - Cone Type - 92601 - 50-92601F1
Medium nylon meshDisposableSold by the box
Paint Stripper, 5 Gal. - 1280F - 95-1280Ff1
Removes many types of marine paints and varnishes including copper based antifoulings, enamels, teak oil finish, urethanes, rubber based deck paints, latex, lacquers, etc. Will not damage gel coat or fiberglass and safe on all wood surfaces. Environmentally safe, biodegradable, non-flammable, low odor and has no harsh solvents.
Paint Stripper, Gal. - 1280Gl - 95-1280Glf1
Removes many types of marine paints and varnishes including copper based antifoulings, enamels, teak oil finish, urethanes, rubber based deck paints, latex, lacquers, etc. Will not damage gel coat or fiberglass and safe on all wood surfaces. Environmentally safe, biodegradable, non-flammable, low odor and has no harsh solvents.
Paint Thinner 1Gl @4 - Gkpt94002P - 986-Gkpt94002Pf1
Effectively thins oil-based paint, stain and varnish. It can also be used to clean brushes and equipment immediately after use. Not intended for sale or use in California. Sold in Case Packs Only
Paint Thinner Pint - Tpvb500 - 331-Tpvb500F1
For Epifanes one-part paints and varnishes
Paint Thinner Quart - Tpvb1000 - 331-Tpvb1000F1
For Epifanes one-part paints and varnishes
Paint V-Slvr@6 - 802878020 - 710-92-802878020F1
Paint-Levele @6 - 80287854 - 710-92-802878 54F1
Painters Lacquer Thinner Gal Sunnyside Lacquer Thinner Gal - 467G1 - 373-467G1F1
Painters Lacquer Thinner Qt Sunnyside Lacquer Thinner Qt - 46732 - 373-46732F1
Pair Of Sock.Pins W/Thumb Clps Bell Rv Rvx - 95-01-9415 - 286-95019415F1
Panel 360 120Vac Rotary30A Off+2 - 1481-Bss - 661-1481F1
Panel Mount Control W/O Power Trim - 883710A01 - 710-883710A01F1
Panel mount control features a chrome handle and is designed for outboard engines w/o power tirm. Requires a separate Ignition/Choke assembly and cables. The power trim adapter harness is included to convert 3 pin molex connector to the 3 blade Mercury connector. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select Mercury/Mariner outboards w/o power trim.
Panel Mount Control W/Power Trim - 883710A02 - 710-883710A02F1
Panel mount control features a chrome handle and comes with a 4' trim harness with a 3 pin molex connector. Requires a separate Ignition/Choke assembly and cables. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select Mercury/Mariner outboards w/integral trim.
Panel Mount Control W/Power Trim - 883710A03 - 710-883710A03F1
Panel mount control features a chrome handle and comes with a 4' trim harness is with a 4 pin molex connector. Requires a separate Ignition/Choke assembly and cables. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select MCM and Mercury/Mariner outboards w/integral trim.
Panel Mount Hi Amp Gasket Circuit Breaker - 420860-1 - 354-4208601F1
Panelback 5-1/4" X 3-3/4" X 3" - 4026-Bss - 661-4026F1
Provide electrical insulation for exposed panel backs and mechanical protection for panel backs protruding into lockers. Made of lightweight material for easy drilling for wire entrance and exit.
Panelback 5-1/4" X 7-1/2" X 3" - 4027-Bss - 661-4027F1
Provide electrical insulation for exposed panel backs and mechanical protection for panel backs protruding into lockers. Made of lightweight material for easy drilling for wire entrance and exit.
Panoptix™ Ps30 Down Transducer - 010-01284-00 - 322-0100128400F1
With the Panoptix Down transducer, you can actually see fish and bait swimming around under your boat in real time, even while stationary. You get 3 remarkable views: LiveVü Down, RealVü 3-D Down and RealVü 3-D Historical. LIVEVü DOWN: Provides real-time moving sonar images. You can see fish swimming toward or away from the boat. You can see small baitfish and large target fish swimming around, even your lure.REALVü 3-D DOWN: Allows your boat to be stationary and still see things in 3-D around your boat. It shows history of only 1 sweep.REALVü 3-D HISTORICAL: Used for finding fish while your boat is moving. This shows the entire water column you have passed over in 3-D, from the bottom of the surface and all of the fish in between.
Panther 100205 Full Synthetic Power Steering Fluid, Qt. - 100205 - 781-100205F1
Engineered specifically for Panther's Power Steering systems. It is designed for optimal functionality in all seasons. The full synthetic chemistry and high viscosity index ensure extended life performance across a wide temperature range. Formulated with synthetic base stock and premium additives. Includes additives to inhibit rust and corrosion and provide excellent anti-wear characteristics.
Panther 106107 Xps Power Steering Hose Kit, 7' - 10-6107 - 781-106107F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106108 Xps Power Steering Hose Kit, 8' - 10-6108 - 781-106108F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106110 Xps Power Steering Hose Kit, 10' - 10-6110 - 781-106110F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106112 Xps Power Steering Hose Kit, 12' - 10-6112 - 781-106112F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106114 Xps Power Steering Hose Kit, 14' - 10-6114 - 781-106114F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106116 Xps Power Steering Hose Kit, 16' - 10-6116 - 781-106116F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106118 Xps Power Steering Hose Kit, 18' - 10-6118 - 781-106118F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106120 Xps Power Steering Hose Kit, 20' - 10-6120 - 781-106120F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106122 Xps Power Steering Hose Kit, 22' - 10-6122 - 781-106122F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106124 Xps Power Steering Hose Kit, 24' - 10-6124 - 781-106124F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 15 Liter Pneumatic Or Manual Pro Series Heavy Duty Oil Extractor - 756015P - 781-756015Pf1
Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. Suitable for engine oil, gear lube, brake fluid, coolant, etc. Not for use with flammable or corrosive products.Can be operated manually or attached to a compressor and features a 40-170 psi working range.
Panther 2 Stroke Outboard Motor Bracket Max 10 Hp, 14" Lift, Stainless Steel - 550010 - 781-550010F1
Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. 8.-1/2" x 10-1/2" mounting pad. For 2-Stroke motors only, Not recommended for 4-Stroke outboards.
Panther 2 Stroke Outboard Motor Bracket Max 12 Hp, 14" Lift, Aluminum - 550012 - 781-550012F1
Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
Panther 2 Stroke Outboard Motor Bracket Max 20 Hp, 11" Lift, Aluminum - 550021 - 781-550021F1
Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
Panther 2" Set-Back Plate - 550220 - 781-550220F1
Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum, dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard BIA bolt pattern, but is drillable for non-standard patterns. Overall size: 16" Wx 13.25 H x 2"D. Support weight is 300HP and 635 lbs.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - 558100 - 781-558100F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - 558200 - 781-558200F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - 558400 - 781-558400F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - C55-8100 - 781-C558100F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 4 Stroke Outboard Motor Bracket Max 15 Hp, 10" Lift, Aluminum - 550407Al - 781-550407Alf1
Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 4-position lock bar allows for installation flexibility for either long or short shaft motors.
Panther 4 Stroke Outboard Motor Bracket Max 15 Hp, 11" Lift, Stainless Steel - 550408Ss - 781-550408Ssf1
Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 5-position lock bar allows for installation flexibility for either long or short shaft motors.
Panther 4 Stroke Outboard Motor Bracket Max 35 Hp, 10" Lift, Aluminum - 550410 - 781-550410F1
The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 5 vertical running positions.
Panther 4 Stroke Outboard Motor Bracket Max 35 Hp, 16" Lift, Aluminum - 550416 - 781-550416F1
The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 4 vertical running positions.
Panther 550024 2 Stroke Fixed Mount Outboard Motor Bracket Max 12Hp, 85 Lbs. - 550024 - 781-550024F1
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket.Use of a safety cable is recommended. (not included)
Panther 550028 4- And 2-Stroke Fixed Mount Outboard Motor Bracket Max 35Hp, 263 Lbs. - 550028 - 781-550028F1
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket. Safety cable included. Holes in poly board are predrilled for quick assembly.
Panther 550035 Model 35 Motor Lift For Up To 35 Hp Or 150 Lbs. - 550035 - 781-550035F1
This heavy-duty bracket easily handles auxiliary outboards up to 35hp or 150 pounds. Kicker motors are supported in any position with this durable design, featuring a 12 volt actuator that you control with a remote on a 12' cable. The Model 35 is the only kicker motor lift with a convertible setback. This unit will tilt your motor approximately 60°. The Model 35 is the only kicker motor lift with a convertible setback; this unit can be adjusted to 8 or 13 inches of setback, making it ideal for inboards, I/Os, jet-drives, and outboards when over the transom mounting is unavailable. Made of 713 cast aluminum. protected with durable black powder coat paint. 559035: Optional 2-piece, cast aluminum spacer kit provides an extra 3" of setback to allow most kicker motors to be tilted up without hitting transom.550105: Optional wireless remote available.
Panther 550055 Model 55 Trim And Tilt Motor Bracket For Outboards 15 To 55 Hp, Up To 250 Lbs. - 550055 - 781-550055F1
Our most popular trim and tilt is rated for outboards up to 55 HP or 250lbs. Perfectly designed for pontoons, fishing or hunting boats. A rugged 12 volt powered actuator moves the motor plate up and down, allowing the user to easily position the motor with the 12' cabled remote control. Made of 713 cast aluminum and protected with durable black powder coat, the 55 has an overall weight of 25 lbs. Provides an additional 5° of negative tuck for improved hole shot. Adapts to clamp-on or bolt-through outboards.550105: Optional wireless remote available.
Panther 550065 Pontoon Kicker Motor Bracket - 55-0065 - 781-550065F1
Our Pontoon Kicker Motor Bracket Kit makes what has long been a difficult installation a breeze. The kit contains Adapter Bracket (55-0060) plus Swim Platform Bracket (55-0030) with all mounting hardware included. The Adapter Bracket mounts to the pontoon frame rails. Rated for auxiliary 4-Stroke motors up to 20 HP.
Panther 550103 T4 Electro Steer For Kicker Motor (9" Between Motors) - 550103 - 781-550103F1
The T4 Electro-Steer features a unique solution to fit every kicker motor with a tilt tube. It installs in minutes thru the tilt tube and doesn't take any room away from your transom. Requires 9" between the main engine and kicker motor. Includes a 24' cable w/handheld remote for convenient use, connecting rod w/quick disconnects, and all mounting hardware. Optional wireless remote w/50' range available.
Panther 550503Ne T5 Electro Steer (W/O Electronics, Remote Or Relay Switch Box) For Kicker Motor For Use With Pro 3 Trollmaster - 550503Ne - 781-550503Nef1
The T5 NE models, without electronics, connect directly to the TrollMaster Pro 3 electronic throttle and steering control unit to provide an overall solution to control the throttle and steering for a kicker motor up to 40 hp. It can be installed on any kicker motor with a threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4" between the main engine and the kicker. Mounting hardware included. 12V. Note: This is not a stand alone system and requires the TrollMaster control unit to operate.
Panther 552195 Outboard Motor Support, Length: 4-7/8" Fits: Trim Ram Diameters Of 0.625" To 0.75" - 552195 - 781-552195F1
Ensure the safety of your outboard motor during trailering and transport. Durable, adaptable, and designed for convenience. For boat owners who frequently move their boats over rough roads or long distances. Internal features adapt to various shaft diameters, ensuring a secure fit for outboards ranging from 50 to 300 HPInjection-molded polyurethane offers superior durability, consistency, and resiliency compared to rubberDistinct Panther purple color serves as a visual cue to remove the stabilizer before using the motor, preventing accidental damageBuilt to withstand harsh conditions, ensuring long-lasting performanceErgonomic grip for quick removal and installation
Panther 552950 Tiebar Drive Bracket, Uflex - 55-2950 - 781-552950F1
The Panther Drive Bracket is made of stainless steel and is the same bracket included with the Panther Model 55-2900 Trolling Motor Tie Bar Kit. The bracket attaches directly to the most common hydraulic steering units, including Uflex, and can be combined with our Model 55-2400 and 55-2600 for a professional installation. It's never been easier to install a main engine to kicker tie bar kit.
Panther 559800 Foot Control Tray W/Insert - 55-9800 - 781-559800F1
The recessed tray mounts flush with your boat deck providing a more comfortable, stable stance eliminating back and leg pain from hours of fishng. Enjoy a clean look to your deck without the worry of your foot pedal bouncing around the deck. Easily fits Minn Kota and MotorGuide foot-control trolling motors. Forward taper design makes foot pedal level and drains water faster. 3/8" ID x 8' flexible vinyl tube provided to drain water to bilgeConstructed of high-impact, UV-resistant, high-density polyethyleneColor-molded throughoutNo paint to chip or fadeInstalls easily in any brand of boatIncludes installation instructions, cutting template, drain tube and hardwareFits all Minn Kota, MotorGuide and Garmin foot-controlsID: 9-1/2" W x 13-1/2" L x 4-1/2" D
Panther 559815 Foot Control Tray - 55-9815 - 781-559815F1
The recessed tray mounts flush with your boat deck providing a more comfortable, stable stance eliminating back and leg pain from hours of fishng. Enjoy a clean look to your deck without the worry of your foot pedal bouncing around the deck. Easily fits Minn Kota and MotorGuide foot-control trolling motors. Forward taper design makes foot pedal level and drains water faster. 3/8" ID x 8' flexible vinyl tube provided to drain water to bilgeConstructed of high-impact, UV-resistant, high-density polyethyleneColor-molded throughoutNo paint to chip or fadeInstalls easily in any brand of boatIncludes installation instructions, cutting template, drain tube and hardwareFits all Minn Kota, MotorGuide and Garmin foot-controlsID: 9-1/2" W x 13-1/2" L x 4-1/2" D
Panther 559825 Tray Insert Only - 55-9825 - 781-559825F1
The recessed tray mounts flush with your boat deck providing a more comfortable, stable stance eliminating back and leg pain from hours of fishng. Enjoy a clean look to your deck without the worry of your foot pedal bouncing around the deck. Easily fits Minn Kota and MotorGuide foot-control trolling motors. Forward taper design makes foot pedal level and drains water faster. 3/8" ID x 8' flexible vinyl tube provided to drain water to bilgeConstructed of high-impact, UV-resistant, high-density polyethyleneColor-molded throughoutNo paint to chip or fadeInstalls easily in any brand of boatIncludes installation instructions, cutting template, drain tube and hardwareFits all Minn Kota, MotorGuide and Garmin foot-controlsID: 9-1/2" W x 13-1/2" L x 4-1/2" D
Panther 85B203Mar Happy Hooker Mooring Aid - 85-B203Mar - 757-85B203Marf1
Makes picking up moorings a snap. This unique product allows the user to easily pass a rope, mooring line, dock line or cable through an eye hook, ring, bow eye or mooring buoy eye and retrieve, all in one simple motion. Easily fastens to most any type of extension pole with a bolt or hose clamp. (Pole not included.)
Panther 950305 Reinforced Composite Multi-Mount Electronics Mount - 95-0305 - 781-950305F1
Low profile unit which allows you to mount your electronics in the tightest spots! Constructed of nylon reinforced composite making it light and affordable. It features the unmatched strength and durability that our mounts are known for at a very affordable price! Comes complete with mounting hardware.
Panther 950308 Multi-Mount Electronics Mount, 8" - 95-0308 - 781-950308F1
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range of possible positions is available. Simply loosen the locking ball knob to adjust or remove the unit completely. Stainless steel and hard coat anodized aluminum construction. Can be modified to mount GoPro® cameras.
Panther 950310 Multi-Mount Electronics Mount, 10" - 95-0310 - 781-950310F1
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range of possible positions is available. Simply loosen the locking ball knob to adjust or remove the unit completely. Stainless steel and hard coat anodized aluminum construction. Can be modified to mount GoPro® cameras.
Panther 950325 Trollmaster Remote Control Mount (Remote Sold Separately) - 95-0325 - 781-950325F1
TrollMaster nylon composite mounting plate kit allows for convenient mounting of the TrollMaster remote control to any Angler's Pal / Panther electronics mount for viewing at almost any angle. Adjustable 4" mount. For the most convenience, use our Quick Release (AP500) sold separately.
Panther 954000 Electronics Dash Mount - 95-4000 - 781-954000F1
Securely fasten electronic units up to 12". Designed to work with all major electronics brands. Created to give the angler better visibility and adjustment flexibility over flush-mounted electronics. Universal fishfinder and sonar/GPS compatibilityPowder-coated, marine-grade aluminum constructionDrill additional holes to customize fit and function
Panther 954200 Electronics Deck Mount, Angled - 95-4200 - 781-954200F1
Securely fasten electronic units up to 16". Designed to work with all major electronics brands. Provides additional deck space, while allowing space to comfortably operate a recessed trolling motor foot pedal. 14.1" Wide between mounting feet. Universal fishfinder and sonar/GPS compatibilityPowder-coated, marine-grade aluminum constructionFits almost every recessed trolling motor foot pedalDrill additional holes to customize
Panther 954400 Electronics Deck Mount, Flat - 95-4400 - 781-954400F1
Securely fasten electronic units up to 16". Designed to work with all major electronics brands. Provides additional deck space, while allowing space to comfortably operate a recessed trolling motor foot pedal. 14.1" Wide between mounting feet. Universal fishfinder and sonar/GPS compatibilityPowder-coated, marine-grade aluminum constructionFits almost every recessed trolling motor foot pedalDrill additional holes to customize
Panther 9905029 Ball Stud Assembly - Stainless Steel - 99-05029 - 757-9905029F1
Ball stud for steering rod in fresh or saltwater applications.
Panther 9952400 Quick Disconnect End Assembly - Zinc Plated - 99-52400 - 757-9952400F1
Quick disconnect end for steering rod in fresh or saltwater applications.
Panther 9952600 Quick Disconnect End Assembly - Stainless Steel - 99-52600 - 757-9952600F1
Quick disconnect end for steering rod in saltwater applications.
Panther 9955531A Replacement Motor - 99-55531-T4 - 757-9955531Af1
Replacement Motor
Panther Adjustable Transom Saver 28 To 59" - 551900 - 781-551900F1
Reaches the hard-to-access trailer crossbars that extend under the boat. Comes with easy to install bracket attachment. Fits most popular brands of trailers and is easily removed for loading and unloading.
Panther Apmt14 Multi-Mount Electronics Mount - Apmt14 - 860-Apmt14F1
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range of possible positions is available. Simply loosen the locking ball knob to adjust or remove the unit completely. Stainless steel and hard coat anodized aluminum construction. Can be modified to mount GoPro® cameras.
Panther Apmt17 Multi-Mount Electronics Mount - Apmt17 - 860-Apmt17F1
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range of possible positions is available. Simply loosen the locking ball knob to adjust or remove the unit completely. Stainless steel and hard coat anodized aluminum construction. Can be modified to mount GoPro® cameras.
Panther Auxiliary Motor Steering Kit For Use With Trolling Motors Up To 25 Hp - 552400 - 781-552400F1
Auxiliary motor steering kit provides remote control steering for any type or size of outboard trolling motor up to 25 horse-power. Constructed of zinc plated steel.
Panther Auxiliary Motor Steering Kit For Use With Trolling Motors Up To 25 Hp - 552600 - 781-552600F1
Auxiliary motor steering kit provides remote control steering for any type or size of outboard trolling motor up to 25 horse-power. Constructed of stainless steel.
Panther Blue Polypropylene 3/8" Anchor Rope Includes No-Tie Rope Cleat And Snap Hook - 757000 - 781-757000F1
Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene it has an amazing tensile strength of 2800 lbs. Comes packaged with a no-tie rope cleat and snap hook.
Panther Blue Polypropylene 3/8" Anchor Rope Includes No-Tie Rope Cleat And Snap Hook - 757010 - 781-757010F1
Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene it has an amazing tensile strength of 2800 lbs. Comes packaged with a no-tie rope cleat and snap hook.
Panther Bolt-On And Over-The-Roller Bracket Adjustable Motor Support 34 To 36" - 552100 - 781-552100F1
Universal design. Comes with both the bolt-on bracket and the over-the-roller bracket and 2 rubber straps - a 10" motor strap and a 5" trailer strap.
Panther Capmt10 Multi-Mount Electronics Mount - Camoflauge - Cap-Mt10 - 860-Capmt10F1
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range of possible positions is available. Simply loosen the locking ball knob to adjust or remove the unit completely. Stainless steel and hard coat anodized aluminum construction. Can be modified to mount GoPro® cameras.
Panther Capmt8 Multi-Mount Electronics Mount - Camoflauge - Cap-Mt8 - 860-Capmt8F1
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders, radar screens, speakers, multi-function displays, or any other accessory in a limited space or that needs to be raised. In addition, due to the unique double ball configuration, a broad range of possible positions is available. Simply loosen the locking ball knob to adjust or remove the unit completely. Stainless steel and hard coat anodized aluminum construction. Can be modified to mount GoPro® cameras.
Panther Diy Series Oil Extractor - 756025 - 781-756025F1
These compact, powerful pumps make oil changes fast, efficient and cleaner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Both have nonkinking, flexible metallic extractor tubes. 756025: Downsized 2.5-liter, perfect for four-strokes up to 50 hp and sailboats with small engines.Note: Not for use with flammable products.
Panther Diy Series Oil Extractor - 756060 - 781-756060F1
These compact, powerful pumps make oil changes fast, efficient and cleaner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Both have nonkinking, flexible metallic extractor tubes. 756060: Has a large 6-liter capacity to meet the needs of most boaters. Note: Not for use with flammable products.
Panther Electro Steer And Auxiliary Motor Steering Adapter Kit - 555705 - 781-555705F1
Used specifically to adapt our steering kits to your main engine hydraulic steering. A cleverly designed "L" shaped bracket makes steering your kicker motor from your console an everyday event. The kit includes "L" bracket, washers, mounting bolt, loctite, and instructions.
