Ram Led Spotlight Mount With Medium Size Tough-Claw™ - Ram-B-152-404 - 170-Ramb152404F1

The RAM Mounts LED Spotlight has been completely redesigned. We have integrated a new LED bulb that yields a brighter and more efficient light that enables you to add safety and lower power draw to your ATV, boat or vehicle. The weather-resistant body shields the 30-degree spot light LED bulb, which yields a wider and brighter range of light, from the elements. The long cord with standard 12v plugin means you can mount the light from nearly any location. The RAM-B-152-404 includes the Medium RAM® Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. Perfectly suited for mounting on any handlebars, roll bars and much more, the RAM® Tough-Claw™ with LED Spotlight will soon become another essential RAM® component in your collection of mounting options. PatentedClamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Sealed Beam30° Spot LightFrosted Lens4500K Color TempHigh strength glass filled nylon construction with corrosion resistant stainless steel hardwareRubber pads provide stable, even gripping and protection of mounting surfaceClamp jaw is configured for round, flat and odd shapesQuick installation and removal of Tough-Claw™Powder coated marine grade aluminum and high strength compositeLifetime WarrantyMade in U.S.A.

Ram Medium Tough-Claw™ With 1.5" Diameter Rubber Ball - Rap-404U - 170-Rap404Uf1

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 1" to 1.875"Clamping Range (Flat Surfaces): 0" to 1.6"

Ram R-A-M® Mounting System, 2.5" Round Ball Base W/1.5" Ball - Ram-202 - 170-Ram202F1

The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Ram R-A-M® Mounting System, 2.5" Round Ball Base W/1" Ball - Ram-B-202 - 170-Ramb202F1

The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Ram R-A-M® Mounting System, 2.5" Round Ball Base W/2.25" Ball - Ram-D-202U - 170-Ramd202Uf1

The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Ram R-A-M® Mounting System, Short Arm - Ram-D-201U-C - 170-Ramd201Ucf1

The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Ram R-A-M® Mounting System, Standard Arm - Ram-D-201U - 170-Ramd201Uf1

The arm has a socket at both ends that accommodates ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The round base has pre-drilled holes.

Ram Rail Adapter Kit - Ram-233 - 170-Ram233F1

Rail Adapter Kit for RAM202.

Ram Rail Base With Zinc Coated U-Bolt & 1" Ball For Rails From 0.5" To 1.25" In Diameter - Ram-B-231Zu - 170-Ramb231Zuf1

The RAM-B-231ZU consists of a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter.

Ram Ram101Lo12 Ram® Double Ball Mount For Lowrance Eagle 4 & 5, Hook² & Reveal 5 - Ram-101-Lo12 - 170-Ram101Lo12F1

Designed for heavy duty fresh water use, this C size (1.5") aluminum drill-down kit for the Lowrance Eagle 4 & 5, Reveal 5 and Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance unit and you're ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your unit secure and stable in rugged environments on your boat, kayak or inflatable.

Ram Ram114Dtmu Deck And Track Base With Tightening Knobs - Ram-114Dtmu - 170-Ram114Dtmuf1

This deck and track flat surface base includes a socket compatible with RAM ROD® and RAM-TUBE™ holders with a spline post. Designed to attach to Tite-Lok track systems with a 3.25" width. Hardware included: (2) 1/4"-20 x 5/8" Knobs, (2) 1/4"-20 Nuts

Ram Ramb2312Un7 Ram® X-Grip® Phone Mount With Atv/Utv Rail Base - Ram-B-231-2-Un7 - 170-Ramb2312Un7F1

Consists of a steel strap base, stainless steel u-bolt base, double socket arm and universal spring loaded X-Grip® cradle for cell phones. The X-Grip® sports great holding power without hiding your phone behind foam pads and plastic. Includes a device tether recommended for outdoor applications. Phone mount for ATV/UTVs includes standard size phone holder, rail and bar base with strap clamp and U-bolt componentsRAM® strap mount will accommodate most common roll bar sizes on UTV and handlebar sizes on ATVsMade of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environmentsBacked by a lifetime warrantyCompatible with: Width Range: 1.875" - 3.25" Depth Range: .875" max

Ram Ramd111 2-1/4" Ball Mount W/3" X 11" Base & 3-3/4" Base - Ram-D-111 - 170-Ramd111F1

A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

Ram Ramd111U 2-1/4" Ball Mount W/3" X 11" Base & 3-3/4" Base - Ram-D-111U - 170-Ramd111Uf1

A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

Ram Ramd115 Universal D Size Ball Mount For 9"-12" Fishfinders & Chartplotters - Ram-D-115 - 170-Ramd115F1

A base with a 2.25" diameter D size ball, arm and a 6.25" x 2" marine electronic plate with a D size ball for larger devices. The plate contains different combinations of pre-drilled holes and is a direct fit for 9"-12" fishfinder gimbal brackets.

Ram Ramd115C Universal D Size Ball Mount For 9"-12" Fishfinders & Chartplotters - Ram-D-115-C - 170-Ramd115Cf1

A base with a 2.25" diameter D size ball, arm and a 6.25" x 2" marine electronic plate with a D size ball for larger devices. The plate contains different combinations of pre-drilled holes and is a direct fit for 9"-12" fishfinder gimbal brackets.

Ram Ramd20225C202 2-1/4" Ball Mount For Humminbird Helix 9, 10, 12 - Ram-D-202-25-C-202 - 170-Ramd20225C202F1

Powder coated marine grade aluminum mount. The round plate contains two mounting holes at 180° and three mounting holes at 120°. The rectangular plate contains a 4-hole pattern of 1.5" x 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjustability, So you can set your device at the perfect veiwing angle, while suited for any rugged environment. Weight capacity up to 15 lbs. Fits Humminbird Helix 9, Humminbird Helix 10, Humminbird Helix 12.

Ram Ramholun12Wbv7M1 Ram© Tough Charge™ 15W Waterproof Wireless Charging Holder With Charger - Ram-Hol-Un12Wb-V7M-1 - 170-Ramholun12Wbv7M1F1

Waterproof Qi compatible wireless phone charging cradle features spring-loaded RAM® X-Grip® technology and 15W maximum output. Cradle ensures your compatible phone charges no matter what position it's placed at. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. A device tether is included that's recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger. Kit includes wireless cradle, B size (1") diamond ball base, and hardwire chargerCompatible with B size double socket arm of your choice (Not Included)Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments1-year warranty with proof of purchase requiredCompatible Dimensions: Width: 2.375"- 3.25", Max Depth: .875"

Ram Ramholun14Wbv7M1 Ram® Quick-Grip™ 15W Waterproof Wireless Charging Holder With Charger - Ram-Hol-Un14Wb-V7M-1 - 170-Ramholun14Wbv7M1F1

Waterproof Qi compatible wireless phone charging cradle features spring-loaded RAM® Quick-Grip™ design and 15W maximum output. This cradle allows for single-handed placement and removal of your phone while taking advantage of Qi compatible wireless phone charging. Both the top and bottom cups feature rubber to help hold your phone firmly in place. Ensures your compatible phone charges as long as it's within the listed compatible dimensions. A device tether is included that's recommended for outdoor applications. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger. Kit includes wireless charging cradle, B size diamond ball base, and hardwire chargerCompatible with B size double socket arm or your choice (Not Included)Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments1-year warranty with proof of purchase requiredCompatible Dimensions: Height: 5.625" - 6.625", Max Width: 3.125", Max Depth: .7"

Ram Rap Ball Universal Mount With 6-1/4" X 2" Plate, 1-1/2" Ball - Rap-111 - 170-Rap111F1

Standard length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Made of High Strength Composite.

Ram Rap Ball Universal Mount With 6-1/4" X 2" Plate, 1" Ball - Rap-B-111 - 170-Rapb111F1

Standard length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Made of High Strength Composite.

Ram Rap400D202U Ram® Trolling Motor Stabilizer - Tough-Claw™ - Rap-400-D-202U - 170-Rap400D202Uf1

Includes small version of the RAM® Tough-Claw™, long length C size RAM® double socket arm, and 2.5" round plate with C size 1.5" RAM® rubber ballSmall RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surfaceMade of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environmentsBacked by a lifetime warranty

Ram Rap402 Ram® Cable Manager For Round Base Plates, Packaged - Rap-402 - 170-Rap402F1

An integrated route for electrical wiring which cleanly covers installation holes. Glass filled nylon creates a barrier between the RAM Surface Mount and the attachment area; minimizing vibration. This item will fit any of the 3.68" diameter round plates with a 3 hole pattern. Compatible with all 2.25" diameter ball bases that contain a three hole, 120° hole pattern. Will not work with the AMPs hole pattern plates.

Ram Rap402U Ram® Cable Manager For 3.68" Diameter Round Base Plates, Bulk - Rap-402U - 170-Rap402Uf1

An integrated route for electrical wiring which cleanly covers installation holes. Glass filled nylon creates a barrier between the RAM Surface Mount and the attachment area, minimizing vibration. This item will fit any of the 3.68" diameter round plates with a 3 hole pattern. Compatible with all 2.25" diameter ball bases that contain a three-hole, 120° hole pattern. Will not work with the AMPs hole pattern plates.

Ram Rap403 Ram® Cable Manager W/Amps Hole Pattern For Electronic Mounts - Rap-403 - 170-Rap403F1

The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage. This item will work with any of the 2-5/8" round plates with AMPs hole pattern.

Ram Rapb417400 Ram® Level Cup™ Xl Drink Holder With Ram® Tough-Claw™ - Rap-B-417-400 - 170-Rapb417400F1

Designed for bigger insulated cups, plastic water bottles or steel coffee cup, Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with an integrated Tough-Claw™. This allows for toolless removal and adjustments on any rail or flat bar. Can attach to any surface from flat through a 1.5" railing. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various size cups as well. Compatible with 12-32 oz drinks

Ram Rmb400Aun12Wv7M1 Ram®Tough-Charge™15W Wireless Charging Mount With Tough-Claw™ - Ram-B-400-A-Un12W-V7M-1 - 170-Rmb400Aun12Wv7M1F1

Waterproof Qi compatible wireless phone charging cradle features spring-loaded RAM® X-Grip® technology and 15W maximum output. Designed with spring-loaded RAM® X-Grip® All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. A device tether is included that's recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. With the RAM® Tough-Claw™ base, you can easily attach the wireless phone charger to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger. Kit includes wireless charging cradle, B size diamond ball base, short double socket arm, RAM® Tough-Claw™ clamping base, and hardwire chargerMade of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments1-year warranty with proof of purchase requiredCompatible Dimensions: Width Range: 2.375" - 3.25", Depth Range: .875" max

Ram Short Double Socket Arm For 1" Balls - Ram-B-201U-A - 170-Ramb201Uaf1

The RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite adjustment and perfect viewing angles.(This product does not include single spring) Dimensions: Overall Length: 2.38"Socket-To-Socket Length: 1.75"

Ram Single Swing Arm Horizontal Mount System - Ram-109H - 170-Ram109Hf1

The RAM single swing arm mount is made of powder coated marine grade aluminum. It consists of a 6" long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.

Ram Single Swing Arm Vertical Mount System - Ram-109V - 170-Ram109Vf1

The RAM single swing arm mount is made of powder coated marine grade aluminum. It consists of a 6" long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.

Ram Small Tough-Claw™ With 1.5" Diameter Rubber Ball - Rap-400U - 170-Rap400Uf1

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14"Physical Dimensions: Height: 4.81", Width: 1.18"

Ram Small Tough-Claw™ With 1" Diameter Rubber Ball - Rap-B-400U - 170-Rapb400Uf1

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14" Physical Dimensions:Height: 4.25", Width: 1.18"

Ram Standard Length Double Socket Arm For 1.5" Balls - Ram-201 - 170-Ram201F1

The RAM-201, standard length double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions:Overall Length: 5.625"Socket-To-Socket Length: 4.5"

Ram Tough Claw™ Base W/Double Socket Arm And 1.5" Round Base Adapter - Rap-400-202 - 170-Rap400202F1

The RAP-400-202 consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.Clamping Range (Rail/Tube Surfaces):0.625" to 1.5"Clamping Range (Flat Surfaces):0" to 1.14"

Ram Tough-Claw™ Mount With Level Cup™ Drink Holder - Ram-B-132-400U - 170-Ramb132400Uf1

Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Mount rotates 360°. The integrated eyelet and hook provide an optional tethering function, securing any small or open container in any harsh environment. The RAM Tough-Claw™ is the perfect mounting base for quick and easy nstallation and removal on round, square, odd shaped rails and bars and flat surfaces. Easy installation in many applications including motorcycles, kayaks and boats, bicycles, wheelchairs and more. Compatible with any cups, cans, bottles or mugs ranging from 2.5" - 3.5" diameter. Koozie is included.Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"

Ram Twist Lock Suction Cup Mount With Universal X-Grip® Cell/Iphone Cradle - Ram-B-166-Un7 - 170-Ramb166Un7F1

The RAM-B-166-UN7 consists of a 3.3" diameter suction cup twist lock base, standard length double socket arm and universal spring loaded X-Grip® cradle for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"

Ram Twist Lock Suction Cup Mount With Universal X-Grip® Large Phone/Phablet Cradle - Ram-B-166-Un10 - 170-Ramb166Un10F1

The RAM-B-166-UN10 consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for 5" large phones and phablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 5" phone or phablet. Included are easy access grip knobs for quick insertion and release of your handheld device.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.X-Grip® Dimensions:Minimum Width = 1.75" (Minimum Height = 5.5")Maximum Width = 4.5" (Minimum Height = 3.25")Depth = 0.875"

Ram Universal Finger-Grip™ Phone/Radio Cradle - Ram-Hol-Un4U - 170-Ramholun4Uf1

The RAM-HOL-UN4U is designed to hold a large amount of cell phones and electronic devices. The cradle comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the cradle includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Ram Universal X-Grip® Large Phone/Phablet Cradle - Ram-Hol-Un10Bu - 170-Ramholun10Buf1

The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.75" (Minimum Height = 5.5")Maximum Width = 4.5" (Minimum Height = 3.25")Depth = 0.875"

Ram X-Grip® Phone Mount - Ram-Hol-Un7Bu - 170-Ramholun7Buf1

Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"

Ram-Rod® Hd Fishing Rod Holder - Rap-433-Bmp - 170-Rap433Bmpf1

Compatible with both spinning and casting reels, specifically designed for rugged environments and large fishing rods. It features a rotating ring to keep your rod in place and a swing arm rod stop that can convert it into a tube style rod holder. Compatible with the C-Size and B-Size hex ball bases. Includes a 6" spline post and bulkhead/flat surface mounting base. Also GoPro® compatible - just attach your GoPro factory mount directly to the rod holder or use the Double Ball Mount to attach any action camera. If you want to mount your phone to utilize your mobile fishfinder app, use the Double Ball Mount with X-Grip®.

Ram-Rod™ 2000 Fishing Rod Holder With Bulkhead Mounting Base - Ram-114-B - 170-Ram114Bf1

The RAM-114-B, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.

Ram-Rod™ 2000 Fishing Rod Holder With Flush Mounting Base - Ram-114-F - 170-Ram114Ff1

The RAM-114-F, high strength composite fishing rod holder with flush base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.

Ram-Rod™ 2007 Fishing Rod Holder With Rectangle Flat Surface Base - Rap-340 - 170-Rap340F1

The RAM-ROD™ 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the RAM patented 1.5" ball, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. The ball and socket enable fine adjustment without the need to loosen a knob which is ideal for making small adjustments as your fishing scenario changes throughout the day. Includes 1.5" ball with a 2" x 2.5" flat surface mounting base.

Ram-Rod™ 8" Post Extension Arm - Rap-114-Pau - 170-Rap114Pauf1

Get your fishing rod closer to you, closer to the action, or simply out of the way with this latest extension from RAM. Rugged, high strength composite construction ensures years of performance on the water. The rod holder extender will lift your RAM-ROD™ holder up off of your deck and enable ideal positioning in tight spaces such as on kayaks. This extender is perfect for increasing the rod holder height when using a side mounted gunnel or transom mount.

Ram-Rod™ Combination Bulkhead/Flat Surface Base With Plunger For Spline Posts - Ram-114-Bmp - 170-Ram114Bmpf1

The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters.

Ram-Rod™ Flush Base For Spline Posts - Ram-114Fmu - 170-Ram114Fmuf1

The RAM-114FMU contains 4 pre-drilled holes and a socket compatible with RAM-ROD™ and RAM-TUBE™ holders with a spline post.

Ram-Rod™ Rail Mount Adapter Kit - Ram-114Rm - 170-Ram114Rmf1

The rail mount adapter for the RAM-114BMU base; this adapter joins to base plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base.

Ram-Tube™ 2008 Fishing Rod Holder With Round Flat Surface Base - Rap-119 - 170-Rap119F1

The RAP-119 consists of the RAM-TUBE™ 2008 fishing rod holder and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball and socket feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. The RAM-TUBE™ 2008 tube holder integrates the patented rubber ball and socket design with a self draining and quick to access tube for the butt of most any fishing rod. The tube is made of extremely durable composite. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.Tube Dimensions:Inner diameter: 1.9"Inner tube length: 10" (from bottom to top of lip)

Ram® Ram101Lo11 1.5" Double Ball Mount For Select Lowrance Elite-5, Elite 7 Ti/Ti®, Hook & Mark-5 Fishfinders - Ram-101-Lo11 - 170-Ram101Lo11F1

The RAM-101-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti®, HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.

Ram® Ram108 Trolling Motor Stabilizer, 5-1/2" Arm - Ram-108 - 170-Ram108F1

A single strap base attaches to your trolling motor shaft and connects to a standard double socket arm and a 2.5" diameter round base. Effectively eliminates vibration from your trolling motor, the stabilizer fits trolling motor shafts from 0.5" - 2" dia. Protects the shaft, mount, and head of your motor from damage. Ideal for anglers with bow-mounted trolling motors.

Ram® Ram108D Trolling Motor Stabilizer, 9" Arm - Ram-108-D - 170-Ram108Df1

A single strap base attaches to your trolling motor shaft and connects to a standard double socket arm and a 2.5" diameter round base. Effectively eliminates vibration from your trolling motor, the stabilizer fits trolling motor shafts from 0.5" - 2" dia. Protects the shaft, mount, and head of your motor from damage. Ideal for anglers with bow-mounted trolling motors.

Ram® Ramb101Lo11 1" Double Ball Mount For Lowrance Elite-4, Hook-4 & Mark-4 Fishfinders - Ram-B-101-Lo11 - 170-Ramb101Lo11F1

The RAM-B-101-LO11 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4, Mark-4 and Hook-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.

Ramp Door Bumper Round Blk Bell Rv Rvx - E203 - 350-E203F1

Ramp Grip Glides Kit Of 22 - 13350 - 581-13350F1

Our grip glides allow you to utilize your trailer for snowmobile or ATV no matter the weather. This unique design features grips for ATV wheels and a glide pattern to suspend snowmobile wear bars for easy loading. Works on all types of trailers including tilt trailer, trailer w/ ramp or an enclosed trailer.

Ramp Grips Set 6/Pk - 13204 - 581-13204F1

Protect your ramp and Climb on with Ease! Excellent traction and braking control while loading or unloadingGives superior traction and protection from stud penetrationWraps right around your 1" Bars on any rampOne side can be cut for larger sizes Cross Bars15" length protects ramp from all Track widthsEach 6 piece kit comes with Stainless Steel Torque fasteners and driverFlexible, Strong and Guaranteed to last!Made in USA and includes Caliber's lifetime warranty

Ramuc High Build Ep Pool Paint - 912231102 - 93-912231102F1

Range 17 3 Burner 12V/Lp - 480-2730 - 184-4802730F1

Range 17 Blk Door, Piezo Srnsxb3B3Xag4Ex - 3621A - 380-3621Af1

Range 21 3 Burner 12V/Lp - 480-2230 - 184-4802230F1

Range 21 Blk 3 Burner Electronic Ignition - Pld621Dwbb - 976-Pld621Dwbbf1