Select Category
Brands
Sea Dog Premium Twisted Three-Strand Nylon Dock Line - 301110025Bl-1 - 354-301110025Bl1F1
100% premium twisted three-strand nylon 100% premium twisted three-strand nylonHigh strength and superior stretch to handle the shock loads of boat wakes and harbor surgesSuperior abrasion resistance to counteract chafeProfessionally hand-spliced with five tucksYacht whipped at the bitter end and splice pointAll lines are medium lay
Sea Dog Premium Twisted Three-Strand Nylon Dock Line - 301112015Bk-1 - 354-301112015Bk1F1
100% premium twisted three-strand nylon 100% premium twisted three-strand nylonHigh strength and superior stretch to handle the shock loads of boat wakes and harbor surgesSuperior abrasion resistance to counteract chafeProfessionally hand-spliced with five tucksYacht whipped at the bitter end and splice pointAll lines are medium lay
Sea Dog Premium Twisted Three-Strand Nylon Dock Line - 301112020Bk-1 - 354-301112020Bk1F1
100% premium twisted three-strand nylon 100% premium twisted three-strand nylonHigh strength and superior stretch to handle the shock loads of boat wakes and harbor surgesSuperior abrasion resistance to counteract chafeProfessionally hand-spliced with five tucksYacht whipped at the bitter end and splice pointAll lines are medium lay
Sea Dog Straight Toggle Pin With Lanyard, Bulk - 299986 - 354-299986F1
L-shaped Toggle Pin features a swivel flip lock for use with Bimini top hardware. For added security, the hinge prevents the 1/4" pin from being withdrawn from the fitting until the locking device is in line with the pin. Attached lanyard reduces risk of loss. Constructed of corrosion resistant 304 stainless steel.
Sea Dog Straight Toggle Pin With Lanyard, Carded - 299986-1 - 354-2999861F1
L-shaped Toggle Pin features a swivel flip lock for use with Bimini top hardware. For added security, the hinge prevents the 1/4" pin from being withdrawn from the fitting until the locking device is in line with the pin. Attached lanyard reduces risk of loss. Constructed of corrosion resistant 304 stainless steel.
Sea Flange Valve 2 - 78-120-01 - 37-7812001F1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Sea Foam Deep Creep Lubricant - Dc14 - 821-Dc14F1
Cleans, penetrates, lubricates and dries, all from a 100% pure petroleum product. For use in all 2- and 4-cycle gas and diesel engines. Spray into carburetor to start engines. Use to clean and lubricate air tools, door locks, and guns. Hundreds of household and shop uses. Deep Creep works with instant action and is oxygen sensor safe.
Sea Foam Sf16 Motor Tune Up, 16 Oz. - Sf16 - 821-Sf16F1
A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2- and 4-cycle. Cleans dirty engine parts internally by removing harmful gums, varnish and carbon build upRemoves moisture from oil crankcases and fuel tanksStabilizes and conditions fuels from becoming staleExcellent for engine storageFor Peak Performance use every 5,000 miles
Sea Foam Sf55 Motor Tune Up, Gal. - Sf128 - 821-Sf128F1
A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2- and 4-cycle. Cleans dirty engine parts internally by removing harmful gums, varnish and carbon build upRemoves moisture from oil crankcases and fuel tanksStabilizes and conditions fuels from becoming staleExcellent for engine storageFor Peak Performance use every 5,000 miles
Sea Foam Ss14 Spray Cleaner & Lube, 14 Oz., 12/Case - Ss14 - 821-Ss14F1
Safely and quickly cleans throttle bodies, intake valves, and combustion chambers. Lubricate throttle plates, bushings, and upper cylinders. When storing, fog and protect all types of carburetor and fuel-injection engines. Petroleum-based, safe to use on coated parts and oxygen sensors.
Sea Hawk 1284Glkit Tuff Stuff 2 Gallon Kit, Light Gray - 1284Glkit - 95-1284Glkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Hawk 1284Qtkit Tuff Stuff 1/2 Gallon Kit, Light Gray - 1284Qtkit - 95-1284Qtkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Hawk 1285Qtkit Tuff Stuff 1/2 Gallon Kit, White - 1285Qt Kit - 95-1285Qtkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Hawk 1285Wglkit Tuff Stuff 2 Gallon Kit, White - 1285Wglkit - 95-1285Wglkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Hawk 4901Gl Colorkote™ Antifouling, Gal., Red - 4901/Gl - 95-4901Glf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4901Qt Colorkote™ Antifouling, Qt., Red - 4901/Qt - 95-4901Qtf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4902Gl Colorkote™ Antifouling, Gal., Blue - 4902/Gl - 95-4902Glf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4902Qt Colorkote™ Antifouling, Qt., Blue - 4902/Qt - 95-4902Qtf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4903Gl Colorkote™ Antifouling, Gal., Green - 4903/Gl - 95-4903Glf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4903Qt Colorkote™ Antifouling, Qt., Green - 4903/Qt - 95-4903Qtf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4904Gl Colorkote™ Antifouling, Gal., Yellow - 4904/Gl - 95-4904Glf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4904Qt Colorkote™ Antifouling, Qt., Yellow - 4904/Qt - 95-4904Qtf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4905Gl Colorkote™ Antifouling, Gal., Deep Black - 4905/Gl - 95-4905Glf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4905Qt Colorkote™ Antifouling, Qt., Deep Black - 4905/Qt - 95-4905Qtf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4910Gl Colorkote™ Antifouling, Gal., Bright White - 4910/Gl - 95-4910Glf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 4910Qt Colorkote™ Antifouling, Qt., Bright White - 4910/Qt - 95-4910Qtf1
Triple Biocide Antifouling Power - Econea, Zinc Omadine, Copper Thiocyanate Vibrant Colors - 6 Basic Colors can be mixed to create thousands of custom colors Multi-season performance in fresh, brackish and saltwater conditions Compatible with all hull types - ideal for ?berglass, aluminum, and steel/iron hulls California Air Quality Compliant - 330 Grams per liter VOC
Sea Hawk 5430Gl Monterey Dark Blue Gal - 5430Gl - 95-5430Glf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5430Qt Monterey Dark Blue Qt - 5430Qt - 95-5430Qtf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5441Gl Monterey Red Gal - 5441Gl - 95-5441Glf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5442Gl Monterey Lt. Blue Gal - 5442Gl - 95-5442Glf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5442Qt Monterey Lt. Blue Qt - 5442Qt - 95-5442Qtf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5443Gl Monterey Green Gal - 5443Gl - 95-5443Glf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5445Gl Monterey Black Gal - 5445Gl - 95-5445Glf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk 5445Qt Monterey Black Qt - 5445Qt - 95-5445Qtf1
Water Based - Low VOC'sSolvent-free. Best protection against all types of fouling; environment-friendly. Easy to apply, semi-hard, ablative finish, compatible with most paints. Apply over most existing bottom paint in good condition. Can be removed from water without affecting antifouling abilities.
Sea Hawk Cukote 330 Low Voc™, Blue, Gal. - 3442Lgl - 95-3442Lglf1
A top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull's underwater surfaces smooth and clean with no buildup of bottom paint over time. Effective below the waterline on fiberglass, steel and wood vessels, Cukote 330 Grams/Liter VOC provides multi-season antifouling protection with its advanced formulation allowing vessels to be removed from the water without compromising it's antifouling characteristics. Semi-hard, self-polishing ablative finishMulti-season performanceRemoving boat from water does not affect antifouling properties47.57% cuprous oxideEffective below the waterline on fiberglass, steel and wood vessels
Sea Hawk Cukote 330 Low Voc™, Dark Blue, Gal. - 3430Lgl - 95-3430Lglf1
A top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull's underwater surfaces smooth and clean with no buildup of bottom paint over time. Effective below the waterline on fiberglass, steel and wood vessels, Cukote 330 Grams/Liter VOC provides multi-season antifouling protection with its advanced formulation allowing vessels to be removed from the water without compromising it's antifouling characteristics. Semi-hard, self-polishing ablative finishMulti-season performanceRemoving boat from water does not affect antifouling properties47.57% cuprous oxideEffective below the waterline on fiberglass, steel and wood vessels
Sea Hawk Cukote 330 Low Voc™, Red, Gal. - 3441Lgl - 95-3441Lglf1
A top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull's underwater surfaces smooth and clean with no buildup of bottom paint over time. Effective below the waterline on fiberglass, steel and wood vessels, Cukote 330 Grams/Liter VOC provides multi-season antifouling protection with its advanced formulation allowing vessels to be removed from the water without compromising it's antifouling characteristics. Semi-hard, self-polishing ablative finishMulti-season performanceRemoving boat from water does not affect antifouling properties47.57% cuprous oxideEffective below the waterline on fiberglass, steel and wood vessels
Sea Hawk Cukote 330 Low Voc™, Teal, Gal. - 3434Lgl - 95-3434Lglf1
A top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull's underwater surfaces smooth and clean with no buildup of bottom paint over time. Effective below the waterline on fiberglass, steel and wood vessels, Cukote 330 Grams/Liter VOC provides multi-season antifouling protection with its advanced formulation allowing vessels to be removed from the water without compromising it's antifouling characteristics. Semi-hard, self-polishing ablative finishMulti-season performanceRemoving boat from water does not affect antifouling properties47.57% cuprous oxideEffective below the waterline on fiberglass, steel and wood vessels
Sea Hawk Cukote 330 Voc™, Black, Gal. - 3445Lgl - 95-3445Lglf1
A top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull's underwater surfaces smooth and clean with no buildup of bottom paint over time. Effective below the waterline on fiberglass, steel and wood vessels, Cukote 330 Grams/Liter VOC provides multi-season antifouling protection with its advanced formulation allowing vessels to be removed from the water without compromising it's antifouling characteristics. Semi-hard, self-polishing ablative finishMulti-season performanceRemoving boat from water does not affect antifouling properties47.57% cuprous oxideEffective below the waterline on fiberglass, steel and wood vessels
Sea Hawk Tuff Stuff Low Voc Epoxy Primer, Gray - 1286/Gl - 95-1286Glkitf1
Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. Tuff Stuff Low VOC is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff Low VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coatProtects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead - above and below the waterlineExcellent for priming props, shafts, keels, trim tabs, thru hulls and lower unitsHighest build epoxy - Fewer coats neededLonger window between coats makes Tuff Stuff Low VOC easy to useReduced labor and less haul out time
Sea Hawk Tuff Stuff Low Voc Epoxy Primer, White - 1287/Gl - 95-1287Glkitf1
Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. Tuff Stuff Low VOC is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff Low VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coatProtects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead - above and below the waterlineExcellent for priming props, shafts, keels, trim tabs, thru hulls and lower unitsHighest build epoxy - Fewer coats neededLonger window between coats makes Tuff Stuff Low VOC easy to useReduced labor and less haul out time
Sea Pump Kit Ss<98-8M0122666 - 8M0122666 - 710-46-8M0122666F1
Sea Pump To Oil Cooler Hose - 88795 - 710-32-88795F1
Sea Pump W/O Air Fittings Ss<46-8M0137215 - 8M0139994 - 710-46-8M0139994F1
Sea Safe Boat Wash - 089732Pw - 74-89732F1
All Sea Safe products are biodegradable and formulated to be effective without the use of harsh chemicals or phosphates. Cleans away dirt, stains, grease, oil, and salt. Use on fiberglass, metal, glass, rubber and painted surfaces. Concentrated for heavy duty cleaning. Will not remove wax or polish.
Sea Safe Boat Wash, Qt. - 089732Pc - 74-89732Cf1
All Sea Safe products are biodegradable and formulated to be effective without the use of harsh chemicals or phosphates. Cleans away dirt, stains, grease, oil, and salt. Use on fiberglass, metal, glass, rubber and painted surfaces. Concentrated for heavy duty cleaning. Will not remove wax or polish.
Sea Strainer 3-3/8" X 1-1/4" - Dok - 70-Dokf1
Sea Strainer Zinc.
Sea Water Pump - 807151A12 - 710-46-807151A12F1
Please see manufacturer application guides for complete application references.
Sea Water Pump W/Air Fit Ss<46-8M0137218 - 8M0139997 - 710-46-8M0139997F1
Sea Water Pump-V-8 W/V-Belt - 72774A32 - 710-46-72774A32F1
Please see manufacturer application guides for complete application references.
Sea Water Strainer, 1-1/2" - 18029 - 762-18029F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea Water Strainer, 1-1/4" - 18016 - 762-18016F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea Water Strainer, 1" - 18005 - 762-18005F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea Water Strainer, 3/4" - 18001 - 762-18001F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea-Dog 0020701 Clamcleat® Lateral, Port - 002070-1 - 354-0020701F1
Cost effective cleats that have a low profile on flat or vertical surfaces. Specifically designed to secure lines on ladders. The cleats can be used on metal or wood ladders.
Sea-Dog 002111 Clamcleat® Racing Junior- Mk1 - 002111-1 - 354-0021111F1
Aluminum. A very strong alloy cleat. Available in standard silver finishes.
Sea-Dog 002120 Clamcleat® Leech Line Cleat/Shield - 2120 - 354-002120F1
Low profile white nylon cleat, for sewing or riveting onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release, added to its low profile it is an ideal cleat for adjusting leech lines. Use a backing plate when riveting a cleat onto fabric as it will prevent the rivet pulling through. Includes two rivets, backing plate and cleat. Shield sold separately.
Sea-Dog 002190 Clamcleat® Racing , Cl219 - Vertical, Silver - 002190-1 - 354-0021901F1
With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light weight and durable performance. CL219 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and most coastal conditions.
Sea-Dog 002200 Clamcleat® Racing , Cl220 - Major, Silver - 002200-1 - 354-0022001F1
With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light weight and durable performance. CL220 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and most coastal conditions.
Sea-Dog 002400 Clamcleat® Major W/Spring Gate - 002400-1 - 354-0024001F1
The red gate is flipped up by hand to keep the rope out of the aluminum alloy cleat and prevent unintentional entry of the rope into the cleat.The CL240 is a modified CL220.
Sea-Dog 0415041 S-Style Pull-Up Cleat With Studs - 041504-1 - 354-0415041F1
Corrosion resistant 316 stainless steel pull-up cleats recess flush to the deck for an attractive contemporary look. The stud mounted fasteners are hidden and will accept drain hoses for water drainage to bilge. Includes backing plate.
Sea-Dog 0416041 Cleat, Stainless Open Base,, A:4" ,B:15/16", C:1-3/4", D:1", #10 Fh - 041604-1 - 354-0416041F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416051 Cleat, Stainless Open Base, , A:5" , B:1-1/8", C:2-1/8", D:1", #10 Fh - 041605-1 - 354-0416051F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416061 Cleat, Stainless Open Base, A: 6", B:1-1/4", C:2-1/4", D:1-1/8", 1/4" Fh - 041606-1 - 354-0416061F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 041608 Cleat, Stainless Open Base,A:8" , B:1-1/2", C:2-13/16", D:1-3/8",1/4" Fh - 41608 - 354-041608F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416081 Cleat, Stainless Open Base, , A:8" , B:1-1/2", C:2-13/16", D:1-3/8",1/4" Fh - 041608-1 - 354-0416081F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 041610 Cleat, Stainless Open Base, A: 10" , B:1-7/8", C:3-5/8", D:1-3/4", 5/16" Fh - 41610 - 354-041610F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416101 Cleat, Stainless Open Base, A: 10" , B:1-7/8", C:3-5/8", D:1-3/4", 5/16" Fh - 041610-1 - 354-0416101F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416121 Cleat, Stainless Open Base, , A: 12" , B: 2-1/8", C:3-3/4", D:1-7/8", 5/16" Fh - 041612-1 - 354-0416121F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416361 Ss Smart Cleat, 6-1/4" - 041636-1 - 354-0416361F1
The Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. Constructed of corrosion resistant investment cast 316 stainless steel. Install with four 1/4" FH fasteners (not included).
Sea-Dog 0416661 Smart Cleat - Stud Mount , 6-1/4" - 041666-1 - 354-0416661F1
The Stud Mount Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. The stud mounted fasteners are hidden, leaving no exposed fasteners to collect water or debris. Studs are 1/4"-20 x 1-1/2". Includes stainless steel washers and nuts. Constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 041708 Heavy Duty Stainless Steel Open Base Cleat, 8" - 41708 - 354-041708F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041710 Heavy Duty Stainless Steel Open Base Cleat, 10" - 41710 - 354-041710F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041712 Heavy Duty Stainless Steel Open Base Cleat, 12" - 41712 - 354-041712F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041715 Heavy Duty Stainless Steel Open Base Cleat, 15" - 41715 - 354-041715F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041856 Arch Stud Mount Stainless Steel Cleat, 6" - 41856 - 354-041856F1
The investment cast 316 stainless steel, stud mounted, arch cleat is classically styled and corrosion resistant. Installation is easy, just drill 2 holes for the studs. fasteners are hidden. Includes backing plate and locking nuts for installation. Optional decorative rub plate available.
Sea-Dog 041860 Arch Stud Mount Stainless Steel Cleat, 10" - 41860 - 354-041860F1
The investment cast 316 stainless steel, stud mounted, arch cleat is classically styled and corrosion resistant. Installation is easy, just drill 2 holes for the studs. fasteners are hidden. Includes backing plate and locking nuts for installation. Optional decorative rub plate available.
Sea-Dog 041886 Arch Stud Mount Stainless Steel Rub Plate, 6" - 41886 - 354-041886F1
Sea-Dog 041886 Arch Stud Mount Stainless Steel Rub Plate, 6",Optional decorative rub plate for Arch Stud Mount Cleat.,,4555636,Hardware,Cleats, 354-041888,Sea-Dog 041888 Arch Stud Mount Stainless Steel Rub Plate, 8" Optional decorative rub plate for Arch Stud Mount Cleat.
Sea-Dog 041890 Arch Stud Mount Stainless Steel Rub Plate, 10" - 41890 - 354-041890F1
Optional decorative rub plate for Arch Stud Mount Cleat. Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included).
Sea-Dog 041906 Low Silhouette Cleat, 6" - 041906-1 - 354-0419061F1
Low Silhouette Cleats designed to fit in tight spaces. A wide base, heavy duty version of the classic 4-hole cleat. Constructed of corrosion resistant investment cast 316 stainless steel for superior durability. Installs with four 1/4" FH fasteners (not included).
Sea-Dog 042103 Closed Base Brass Cleat, 3-3/16", Bulk - 42103 - 354-042103F1
Built to withstand the elements. Constructed of polished cast brass for an attractive yet classic appearance. Installation requires two FH fasteners (not included).
Sea-Dog 0421041 Closed Base Brass Cleat, 4" - 042104-1 - 354-0421041F1
Built to withstand the elements. Constructed of polished cast brass for an attractive yet classic appearance. Installation requires two FH fasteners (not included).
Sea-Dog 0421051 Closed Base Brass Cleat, 5", Carded - 042105-1 - 354-0421051F1
Built to withstand the elements. Constructed of polished cast brass for an attractive yet classic appearance. Installation requires two FH fasteners (not included).
Sea-Dog 0430801 Open Base Nylon Cleat, A: 8" B: 1-11/16" C: 2" D:3-3/8" 1/4" Fh - 043080-1 - 354-0430801F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Sea-Dog 0435401 Nylon Zig Zag Cleat 2/Cd - 043540-1 - 354-0435401F1
A great primary cleat for kayaks, canoes and other small vessels. Constructed of UV stabilized injection molded nylon it is corrosion resistant. Easy to use, simply weave rope around cleat arms, no knots required. The cross-functional lace back design is great for single handed tie-offs. Makes quick work of adjusting and securing anchor, mooring or fender lines. Fits line up to 3/8".
Sea-Dog 0435501 Nylon Zig Zag Cleat 2/Cd - 043550-1 - 354-0435501F1
Designed for easy, one-handed adjustability, this fastening point features enough holding power for bungees, small flags and other cord line quick secure accessories but without the extra line weaves of a horn-style cleat.
Sea-Dog 0441041 4-Hole Cleat, Chrome Zinc, 4-1/2", Carded - 044104-1 - 354-0441041F1
Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included).
Sea-Dog 0441061 4-Hole Cleat, Chrome Zinc, 6", Carded - 044106-1 - 354-0441061F1
Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included).
Sea-Dog 046046 Weldable Aluminum Cleat, 6" - 46046 - 354-046046F1
Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable base for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
Sea-Dog 046048 Weldable Aluminum Cleat, 8" - 46048 - 354-046048F1
Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable base for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
Sea-Dog 0461051 Closed Base Aluminum Cleat - Flat Head, 5" - 046105-1 - 354-0461051F1
Closed base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
Sea-Dog 0461061 Closed Base Aluminum Cleat - Flat Head, 6" - 046106-1 - 354-0461061F1
Closed base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
