Select Category
Brands
Sea-Dog 3371501 Screw Out Deck Plate, 5" White - 337150-1 - 354-3371501F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337152 Screw Out Deck Plate With Internal Collar, 5-1/2", White - 337152 - 354-337152F1
Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.
Sea-Dog 337155 Screw Out Deck Plate, 5" Black - 337155 - 354-337155F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3371551 Screw Out Deck Plate, 5" Black - 337155-1 - 354-3371551F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3371601 Screw Out Deck Plate, 6" White - 337160-1 - 354-3371601F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337161 White Screw Out Deck Plate W/Clear Cover, 6-1/2" - 337161-1 - 354-3371611F1
The Sea-Dog® Screw-Out Deck Plate is constructed with UV stabilized injection molded ABS and feature a clear polycarbonate lid, allowing visual inspection of the watertight compartment without removing the lid. When installing, use silicone sealant on hull or deck surface. Lubricate with Vaseline or Teflon grease. Keep threads clean with hot, soapy water. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvent.
Sea-Dog 337162 Screw Out Deck Plate With Internal Collar, 6-1/2", White - 337162 - 354-337162F1
Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.
Sea-Dog 3371651 Screw Out Deck Plate, 6" Black - 337165-1 - 354-3371651F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337165Bulk Screw Out Deck Platet, 6 Black - 337165 - 354-337165Bulkf1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3371981 Deck Plate Lanyard - 337198-1 - 354-3371981F1
12" Lanyard is designed to retain deck plate lids. Fits all Sea-Dog® Deck Plates. Constructed of corrosion resistant 304 stainless steel. Attaches to lid with #6 RH fastener (included) and to the interior hull with a #10 RH fastener (not included).
Sea-Dog 337310 Thru Vent, White - 337310 - 354-337310F1
Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches.
Sea-Dog 3373161 Flush Hose Vent, 3" Hose, A: 2-13/16", B: 2-3/4", C:3-11/16", D:5/16" ,Hose/ Hole Size : Up To 3", White - 337316-1 - 354-3373161F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3373161 Flush Hose Vent, A: 2-13/16" , B:2-3/4", C:3-11/16", D:5/16", Hose/ Hole Size: Up To 3", Black - 337326-1 - 354-3373261F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337320 Thru Vent, Black - 337320 - 354-337320F1
Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches.
Sea-Dog 3373801 Louvered Vent, Black, A: 1-7/8", B:4-1/4", C:3", D:5-1/2", #8 Fh - 337380-1 - 354-3373801F1
Injection molded ABS.
Sea-Dog 3373811 Louvered Vent, White, A: 1-7/8", B:4-1/4", C:3", D:5-1/2",#8 Fh - 337381-1 - 354-3373811F1
Injection molded ABS.
Sea-Dog 337390 Louvered Vent, Black,A:3-11/16" , B:4-1/4", C:4-7/8", D:5-1/2", #8 Fh - 337390-1 - 354-3373901F1
Injection molded ABS.
Sea-Dog 337391 Louvered Vent, White, A:3-11/16" , B:4-1/4", C:4-7/8", D:5-1/2", #8 Fh - 337391-1 - 354-3373911F1
Injection molded ABS.
Sea-Dog 337400 Louvered Vent, Black, A:3-11/16" , B:9", C:4-7/8", D:10-1/8" ,#8 Fh - 337400-1 - 354-3374001F1
Injection molded ABS.
Sea-Dog 3374011 Louvered Vent, White, A:3-11/16" , B:9", C:4-7/8", D:10-1/8" , #8 Fh - 337401-1 - 354-3374011F1
Injection molded ABS.
Sea-Dog 337416 Flush Hose Vent, 4" Hose, A:3-9/16" , B:3-3/4", C:4-15/16", D:5/16", Hose/ Hole Size:Up To 4", White - 337416-1 - 354-3374161F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337426 Flush Hose Vent, Hose, A:3-9/16" , B:3-3/4", C:4-15/16", D:5/16", Hose/ Hole Size:Up To 4", Black - 337426-1 - 354-3374261F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337500 Louvered Vent, Black - 337500 - 354-337500F1
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with four #8 FH fasteners (not included). UV resistant injection molded ABS construction. Avoid contact with acetone or strong solvents.
Sea-Dog 337501 Louvered Vent, White - 337501 - 354-337501F1
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with four #8 FH fasteners (not included). UV resistant injection molded ABS construction. Avoid contact with acetone or strong solvents.
Sea-Dog 3375901 Flush Thru Vent, 3" Hose, Stainless - 337590-1 - 354-3375901F1
Flush Thru Vent designed for cabin or bilge ventilation. For use with 3" exhaust hose. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).
Sea-Dog 351110 Flip Top Hose Gas Fill, 1-1/2" Hose - 351110 - 354-351110F1
Investment Cast 316 Stainless Steel.
Sea-Dog 3513221 Hose Deck Fill , A: 1-1/2" Hose, B:3", C:3" #10 Fh,Water - 351322-1 - 354-3513221F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" - 11-1/2 NPSM straight cap threads.
Sea-Dog 3513401 Gas Deck Fill With Guard, 1-1/2" Hose - 351340-1 - 354-3513401F1
Gas hose deck fill with integral raised splash guard is constructed of corrosion resistant cast 316 stainless steel. Cap features easy-to-use tabs for key-less operation - no deck plate key required. Cap threads are 1-1/4" - 12 NPSM straight.
Sea-Dog 3513501 Stainless Cast Pipe Deck Fill, Gas - 351350-1 - 354-3513501F1
Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" - 11-1/2 NPSM straight threaded pipe. Includes attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Sea-Dog 3513511 Stainless Cast Pipe Deck Fill, Diesel - 351351-1 - 354-3513511F1
Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" © 11-1/2 NPSM straight threaded pipe. Includes attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Sea-Dog 3513521 Stainless Cast Pipe Deck Fill, Water - 351352-1 - 354-3513521F1
Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" © 11-1/2 NPSM straight threaded pipe. Includes attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Sea-Dog 3520201 Gas Tank Vent - All Thread, Chrome/Brass - 352020-1 - 354-3520201F1
Machined Brass Chrome Plated. 5/8"-18 NF x 1-13/16" thread.
Sea-Dog 353210 Flush Mount Gas Tank Vent - 353210-1 - 354-3532101F1
Investment Cast 316 Stainless Steel.
Sea-Dog 354-2025311 Door Hinge, White Nylon, 2/Cd - 202531-1 - 354-2025311F1
These Door Hinges are constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant stainless steel pin. Installs with six #8 FH fasteners (not included).
Sea-Dog 3570101 Gas Deck Fill Fiberglass Nylon W/Red Slotted Cap - 357010-1 - 354-3570101F1
Sea-Dog's® fiberglass filled injection molded nylon deck fills contain no metal and do not require grounding to the boats electrical system. Caps are color-coded for easy deck fill identification eliminating dangerous and potentially costly problems caused by miss-identification. 1-1/4" - 11-1/2 NPSM straight cap threads. Gas, diesel and water caps include attachment chains. Installs with three #10 FH fasteners (not included).
Sea-Dog 3570131 Water Deck Fill Fiberglass Nylon W/Blue Slotted Cap - 357013-1 - 354-3570131F1
Sea-Dog's® fiberglass filled injection molded nylon deck fills contain no metal and do not require grounding to the boats electrical system. Caps are color-coded for easy deck fill identification eliminating dangerous and potentially costly problems caused by miss-identification. 1-1/4" - 11-1/2 NPSM straight cap threads. Gas, diesel and water caps include attachment chains. Installs with three #10 FH fasteners (not included).
Sea-Dog 3570141 Waste Deck Fill Fiberglass Nylon W/Black Slotted Cap, A: 1-1/2"Hose, B:2-1/2", C: 3-3/8", #10 Fh - 357014-1 - 354-3570141F1
Sea-Dog's® fiberglass filled injection molded nylon deck fills contain no metal and do not require grounding to the boats electrical system. Caps are color-coded for easy deck fill identification eliminating dangerous and potentially costly problems caused by miss-identification. 1-1/4" - 11-1/2 NPSM straight cap threads. Gas, diesel and water caps include attachment chains. Installs with three #10 FH fasteners (not included).
Sea-Dog 3573901 Emergency Deck Fill Plug - 357390-1 - 354-3573901F1
The Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant Nitrile-Buna rubber.
Sea-Dog 3573901 Emergency Deck Fill Plug, Pop Display 10/Pk - 357390-5 - 354-3573905F1
The Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant Nitrile-Buna rubber.
Sea-Dog 3573931 Hose Klip™ - Water Hose Lock For Deck Fills - 357393-1 - 354-3573931F1
Hose Klip™ Water Hose Lock stops hose from coming out of deck fill during filling. Compression fitting locks into place for hands free operation. Fits most 1-1/2" deck fills. Patent Pending.
Sea-Dog 3573935 Hose Klip™ - Water Hose Lock For Deck Fills, Pop Display 20/Pk - 357393-5 - 354-3573935F1
Hose Klip™ Water Hose Lock stops hose from coming out of deck fill during filling. Compression fitting locks into place for hands free operation. Fits most 1-1/2" deck fills. Patent Pending.
Sea-Dog 364190 Polycarbonate Cover For Poly In-Line Strainer - 364190 - 354-364190F1
Polycarbonate cover for strainer
Sea-Dog 4-Position Ignition Switch - 420356-1 - 354-4203561F1
Stamped brass. Functions: Acc.-Off-Ignition-Start. Rated: Ignition 15 Amp @ 12VDC, Solenoid 30 Amp @ 12VDC, Accessory 15 Amp @ 12VDC.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420385-1 - 354-4203851F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420386-1 - 354-4203861F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4000051 Combination Bow Light, 12V - 400005-1 - 354-4000051F1
Injection molded polycarbonate/stamped stainless steel. Note: Not for new construction, for replacement of existing lighting.
Sea-Dog 4000101 Led Fixed Mount All Around Light, 4" - 400010-1 - 354-4000101F1
LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 400015 Led Removable All Around Light, 18" - 400015-1 - 354-4000151F1
Approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Low amp draw. Requires three #8 FH fasteners (not included).
Sea-Dog 4000701 Led Side Mount Lights, , A:3-7/8", B:2-1/4", C:1-7/8", 12V, Stainless - 400070-1 - 354-4000701F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000711 Led Side Mount Lights, White, 1 Pr. - 400071-1 - 354-4000711F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000731 Led Side Mount Lights, Black, 1 Pr. - 400073-1 - 354-4000731F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000801 Led Flush Mount Side Lights, Stainless, 1 Pr. - 400080-1 - 354-4000801F1
One pair includes Port and Starboard lights. Direct replacement for the 400180. LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile).
Sea-Dog 4001101 Fold Down All Around Light, 26" - 400110-1 - 354-4001101F1
Injection Molded Nylon/Aluminum with a white translucent lens. Folds down easily for storage.
Sea-Dog 400111 Replacement Lens - 400111-1 - 354-4001111F1
Replacement Lens
Sea-Dog 400135 Transom Light - Round - 400135-1 - 354-4001351F1
Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001361 Transom Light - Rectangular - 400136-1 - 354-4001361F1
This Rectangular Transom Light is for replacement of existing lighting (not for new construction). Constructed of corrosion resistant stamped 304 stainless steel. Installs with two #10 FH fasteners (not included). These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997.
Sea-Dog 400140 All Around Light - 400140-1 - 354-4001401F1
Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001511 Lens For 400150 (Red/Green) - 400151-1 - 354-4001511F1
Stamped 304 stainless steel. light arc is 20 pts., 225°. Carded.
Sea-Dog 400170 Side Mount Lights, Stainless, 1 Pr. - 400170-1 - 354-4001701F1
Stamped 304 Stainless Steel. One pair includes Port and Starboard lights. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001981 Led Dome Light, 5-1/2", Brass, 12V - 400198-1 - 354-4001981F1
Stamped polished brass, lacquer coated to prevent tarnish. With the low current consumption of .068 amps at 12 volts they give off very little heat and have extremely long service life. Vibration resistant, these LED dome lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included). Prewired with integral side mounted on/off toggle switch.
Sea-Dog 4018403 Led Square Mirror Light With Dimmer - 401840-3 - 354-4018403F1
This LED Square Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. 3000K warm white, 24 Osram LEDs, 1000 lumens @ 6W. Includes #6 FH fasteners and white hole plugs. CE, RoHS compliant. 5/16" deep.
Sea-Dog 4030611 12/24V Led Continuous Adjustment Memory Function Dimmer Switch W/O On-Off Function - 403061-1 - 354-4030611F1
This LED Continuous Adjustment Dimmer Without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When powered, the LED ring is dark blue; when adjusting towards maximum brightness, the ring becomes lighter blue; when adjusting towards minimum brightness, the ring becomes darker blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating.
Sea-Dog 4030631 Led Push Button On/Off Switch - 403063-1 - 354-4030631F1
LED Push Button On/Off Switch is constructed of formed 304 stainless steel. Prewired for ease of installation. Typically wired so LED ring lights up blue when circuit is energized by pushing the center button. IP65 rating.
Sea-Dog 4030641 Led Push Button On/Off Switch - High Amp - 403064-1 - 354-4030641F1
This High Amp LED Push Button On/Off Switch lights up blue when pushing the center button, energizing the circuit. Installs easily. Wired with three spade terminals. Constructed of corrosion resistant formed 304 stainless steel. IP67 rating.
Sea-Dog 4030651 Led Push Button On/Off Switch - 403065-1 - 354-4030651F1
LED Push Button On/Off Switch is prewired for easy installation. Typically wired so LED ring lights up blue when pushing the center button, energizing the circuit. Push button constructed of aluminum with clear water resistant nylon boot. IP66 rating.
Sea-Dog 4042303 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Clear Lens - 404230-3 - 354-4042303F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Stylish stainless steel finish to compliment any interior. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 404232 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Frosted Lens - 404232-3 - 354-4042323F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 404330 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Clear Lens - 404330-3 - 354-4043303F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 4043323 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Frosted Lens - 404332-3 - 354-4043323F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Stylish stainless steel finish to compliment any interior. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 4049393 Led Flex-Neck Day/Night Light With Usb - 404939-3 - 354-4049393F1
LED Flex-Neck Day/Night Light with USB is great for chart lighting or can be used as a reading, cabin, or berth light. Features 21 white LEDs and 3 red LEDs for night vision with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between red, white, and off. Continue to touch button to activate dimmer. 3000K Bridgelux bulbs @ 3W. USB Port: 5V/2A. Constructed of rubber coated plastic. Installs with two #6 FH fasteners (included). CE, RoHS certified.
Sea-Dog 4053003 Led Rechargeable Handheld Flood Light, 12/120V - 405300-3 - 354-4053003F1
The flood light is fully adjustable, the handle allows the light to be hung or propped at many different angles to illuminate the task at hand. Includes both a 12 VDC and 120 VAC charge adapter. Constructed of a black powder coated aluminum housing with a stamped 304 stainless steel bracket and polycarbonate lens. Run time 3-4 hours.
Sea-Dog 4053203 Led Cockpit Spreader Light, 12/24V, Black - 405320-3 - 354-4053203F1
These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Low amp draw, 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.
Sea-Dog 4053213 Led Cockpit Spreader Light, 12/24V, White - 405321-3 - 354-4053213F1
These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Low amp draw, 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.
Sea-Dog 4053603 Led Undermount Light Bar, 5" - 405360-3 - 354-4053603F1
LED Undermount Light Bar has 45° tilt. Osram LEDs provides for 1,200 lumens @ 15W. Constructed of powder coated die cast aluminum with a durable polycarbonate lens. IP67 rating. CE, RoHS compliant.
Sea-Dog 4053643 Led Undermount Light Bar, 10" - 405364-3 - 354-4053643F1
LED Undermount Light Bar has 45° tilt. Osram LEDs provides for 3,200 lumens @ 40W. Constructed of powder coated die cast aluminum with a durable polycarbonate lens. IP67 rating. CE, RoHS compliant.
Sea-Dog 4100511 Wiper Arm 8"-12" Hinge Type - 410051-1 - 354-4100511F1
New style slip-on hinge style wiper blades and arms. Wiper arms fit all standard and waterproof standard motors with 3/8" shaft diameter. Note, blades do not fit 413 series arms.
Sea-Dog 4100541 Wiper Arm 9"-14-3/4"Hinge Type - 410054-1 - 354-4100541F1
New style slip-on hinge style wiper blades and arms. Wiper arms fit all standard and waterproof standard motors with 3/8" shaft diameter. Note, blades do not fit 413 series arms.
Sea-Dog 4111111 Wiper Blade 11" Hook Type - 411111-1 - 354-4111111F1
All hook style wiper blades and arms are replacements for Sea-Dog® wipers sold prior to 1993. In addition, the hook style wiper blades and arms will fit most older wipers sold by AFI, Wilcox, NA Taylor, GEM, L.S. Brown and others.
Sea-Dog 4111141 Wiper Blade 14" Hook Type - 411114-1 - 354-4111141F1
All hook style wiper blades and arms are replacements for Sea-Dog® wipers sold prior to 1993. In addition, the hook style wiper blades and arms will fit most older wipers sold by AFI, Wilcox, NA Taylor, GEM, L.S. Brown and others.
Sea-Dog 4111511 Wiper Blade 11" Hinge Type - 411151-1 - 354-4111511F1
New style slip-on hinge style wiper blades and arms. Wiper arms fit all standard and waterproof standard motors with 3/8" shaft diameter. Note, blades do not fit 413 series arms.
Sea-Dog 4111541 Wiper Blade 14" Hinge Type - 411154-1 - 354-4111541F1
New style slip-on hinge style wiper blades and arms. Wiper arms fit all standard and waterproof standard motors with 3/8" shaft diameter. Note, blades do not fit 413 series arms.
Sea-Dog 415044 Battery Tray With Strap, Group 24 - 415044-1 - 354-4150441F1
Injection Molded Polypropylene.
Sea-Dog 4150471 Battery Tray With Strap, Group 24 - 415047-1 - 354-4150471F1
Injection Molded Polypropylene.
Sea-Dog 415054 Battery Tray, Group 24 - 415054-1 - 354-4150541F1
Injection Molded Polypropylene.
Sea-Dog 415057 Battery Tray, Group 27 - 415057-1 - 354-4150571F1
Injection Molded Polypropylene.
Sea-Dog 4152101 Battery Terminals, Positive & Negative Set - 415210-1 - 354-4152101F1
Wing nut style battery terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead.
Sea-Dog 415211 Battery Terminal, Negative - 415211-1 - 354-4152111F1
Wing nut style battery terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead.
Sea-Dog 4202531 Rocker Switch (Dp) - Illuminating - 420253-1 - 354-4202531F1
These Illuminating Rocker Switches are constructed of durable injection molded nylon and stamped brass. Illuminates in the ON position. Easy to install by simply snapping into a standard 7/8" x 1-7/16" panel slot, with wiring for 1/4" blade terminals. 15A @ 12VDC.
Sea-Dog 4202901 Rocker Switch Mounting Bracket Cover - 420290-1 - 354-4202901F1
Injection Molded Nylon. For standard and Contura rocker switches.
Sea-Dog 420291 Rocker Switch Mounting Bracket, Center - 420291-1 - 354-4202911F1
Injection Molded Nylon. For standard and Contura rocker switches.
Sea-Dog 420292 Rocker Switch Mounting Bracket, End - 420292-1 - 354-4202921F1
Injection Molded Nylon. For standard and Contura rocker switches.
Sea-Dog 4203601 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420360-1 - 354-4203601F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203611 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420361-1 - 354-4203611F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203651 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420365-1 - 354-4203651F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203661 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420366-1 - 354-4203661F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4204241 Waterproof Cap, Black - 420424-1 - 354-4204241F1
Waterproof black cap
Sea-Dog 4204251 Waterproof Cap, Red - 420425-1 - 354-4204251F1
Waterproof red cap
Sea-Dog 4204301 Foot Switch - 420430-1 - 354-4204301F1
Stamped 304 Stainless Steel/Rubber Cover. Switch is normally off and momentary on when depressed by foot.
Sea-Dog 4204861 Safety Magneto Kill Switch - 420486-1 - 354-4204861F1
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The magneto (red cap) version functions in applications where the circuit is normally open (not complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is closed (complete), allowing grounding to a suitable ground such as a grounding block, the battery, or a suitable area on the engine itself. Kill switches include a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Sea-Dog 4204871 Safety Ignition Kill Switch - 420487-1 - 354-4204871F1
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. Kill switches include a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
