Seachoice 19771 20' Rg58U White Coaxial Antenna Cable Assembly, Includes Pl259 Fittings On Both Ends - 19771 - 50-19771F1

RG58U white coaxial cable with PL259 fittings on both ends. Lengths to fit most applications.

Seachoice 19781 5' Rg58U White Coaxial Antenna Cable Assembly, Includes Pl259 Fittings On Both Ends - 19781 - 50-19781F1

RG58U white coaxial cable with PL259 fittings on both ends. Lengths to fit most applications.

Seachoice 19807 Coax Cable With Fme - Black, 5' - 58B05 - 50-19807F1

Coaxial cable extension for VHF antennas fitted with ProConnect FME Connectors. Marine grade and highly durable L-195 cable type. ProConnect features factory installed FME connector with a PL-259 adapter. Eliminates large holes and crimping of connectors. 50 Ohms.

Seachoice 19811 Pl259 & Ug175 Vhf Connector With Adapter - 19811 - 50-19811F1

Chrome Plated Brass Antenna Connector

Seachoice 19891 Antenna Connector - Gold Plated - Pl-258 (Uhf) - 19891 - 50-19891F1

Best for anti-corrosion and contact.

Seachoice 19921 Stainless-Steel Microphone Clip - 19921 - 50-19921F1

One-piece construction. 1" x 1-15/16". Features an integral spring pressure finger to hold the microphone in place. Fits all standard microphones on hailers,CBs and VHF radios.

Seachoice 19991 Black Nylon Microphone Clip - 19991 - 50-19991F1

One piece clip molded of tough nylon. No more rust or scratches. 1-3/8" x 1-3/8". Fits all standard microphones on hailers, CBs and VHF radios. Complete with stainless mounting screws. One per card.

Seachoice 2 Pole Wire Connector, Male/Female, 12 In. Lead - 13841 - 50-13841F1

Trailers that are routinely dunked at the local ramp need equipment that can withstand the abuse to ensure electrical systems remain functional for safe operation on the highway. This two-pole molded line connection with bullet terminals over-molded with black PVC allows for a secure grip when connecting and disconnecting. Suitable for 6, 12 and 24 volt applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Two-pole molded connectionSuitable for 6, 12 and 24 volt applications12 inch lead on each sideRated: 7A at 12VProtective clear package for easy visibility and applicationManufacturer part number 50-13841

Seachoice 2 Position Push Button Switch With Brass Body, Off/Mom. On - 11771 - 50-11771F1

Heavy duty, 6V - 36V, 2 position momentary push-button switch: Off - Momentary On. Normally "Off" S.P.S.T. Gasket sealed case protects against moisture and dust. Molded plastic insulator with protective barrier between terminals. Black moisture repellent rubber button cover. Silver contacts. Mounting stem 1-3/8" L, 5/8" - 32 thread dia.

Seachoice 2 Position Push Button Switch With Polyester Body, Off/Mom. On - 11751 - 50-11751F1

Heavy duty, 6V - 36V, 2 position momentary push button switch: Off - Momentary On. Normally "Off" S.P.S.T. non-corrosive construction. Polyester body and silver contacts with special moisture proof rubber cap. Rated at 30A @ 12V DC, 50A @ 6V DC. Insulated. Chrome plated brass fittings included.

Seachoice 2 Position Toggle Switch With 3 Screw Terminals On/On - 12111 - 50-12111F1

All toggle switches have a chrome plated brass handle, mounting stem and face nut. Mounting stems are 15/32" L; 15/32"-32 thread diameter.

Seachoice 2 Position Toggle Switch With 6 Screw Terminals On/On - 12131 - 50-12131F1

All toggle switches have a chrome plated brass handle, mounting stem and face nut. Mounting stems are 15/32" L; 15/32"-32 thread diameter.

Seachoice 2-Cycle Engine, Oil To Gas Measuring Container, 32 Oz., Wide Mouth Bottle - 21000 - 50-21000F1

This plastic, quart-size bottle lets you add the correct amount of 2-cycle (2-stroke) engine oil needed for the volume of gas in your gas can. Once you know the oil-to-gas ratio for your 2-cycle engine, simply fill your gas can (not included) with gas, then pour the oil into the Seachoice measuring container according to the amount of gas you pumped into the can, and finally, pour the oil from the Seachoice container into your gas can to mix. Gas volume marks on the container are in gallons and liters. Ideal for 100:1, 50:1, 40:1 and 24:1 ratios. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Measure the correct amount of 2-cycle engine oil every timeClear plastic bottle has gas-volume markings in liters and gallonsDetermines ratios for 100:1, 50:1, 40:1 and 24:1 oil-to-gas mixturesDesigned to prevent fouled plugs or seized engines caused by an incorrect amount of oil32-ounce capacity

Seachoice 2-Position Boat Toggle Switch, Off/On - 50-12101 - 50-12101F1

With a chrome plated brass handle, mounting stem and face nut, this two-position single pole, single throw toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers, baitwell pumps and more. Mounting stems are 15/32 inches long and feature a 15/32 inch © 32 thread diameter. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumpsSingle pole, single throw off/on toggle switchTerminals: 2 screwMax Panel Thickness: 3/8 inchManufacturer part number 50-12101

Seachoice 2-Position Heavy Duty Toggle Switch, Off/Momentary On - 12151 - 50-12151F1

Seachoice Toggle Switches feature a chrome-plated brass handle, mounting stem, and face nut, making them perfect for marine electrical applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Heavy-duty, single-pole single-throw toggle switch ideal for marine applicationsNon-corrosive construction throughout; durable, moisture-repellent plastic housing2 screw-type terminals25 amps @ 12V DC; 25 amps @ 6V and 12V DC inductive load; 20 amps @ 6V and 12V DC lamp loadFits panels up to 3/8 inch thickMounting stems are 15/32 inches long; 15/32 inch-32 thread diameterManufacturer part number 50-12151

Seachoice 2-Position Heavy Duty Toggle Switch, On/Off, 2 Screw Type Terminals - 1206 - 50-12061F1

Seachoice Toggle Switches feature a chrome-plated brass handle, mounting stem, and face nut, making them perfect for marine electrical applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Heavy-duty, single-pole single-throw toggle switch ideal for marine applicationsNon-corrosive construction throughout; durable, moisture-repellent plastic housing2 screw-type terminals10 amps @ 12V DC lamp load; 3 amps @ 250V AC; 6 amps @ 12V AC ; 15 amps @ 12V DC inductive loadFits panels up to 1/4 inch thickMounting stems are 15/32 inches long; 15/32 inch-32 thread diameterManufacturer part number 50-12061

Seachoice 2-Position Heavy Duty Toggle Switch, On/Off, 6 In. Wire Leads - 12071 - 50-12071F1

Seachoice Toggle Switches feature a chrome-plated brass handle, mounting stem, and face nut, making them perfect for marine electrical applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Heavy-duty, single-pole single-throw toggle switch ideal for marine applicationsNon-corrosive construction throughout; durable, moisture-repellent plastic housing6 inch wire leads36 amps @ 6V DC; 20 amps @ 12V DC; 3 amps @ 250V AC; 6 amps @ 125V ACFits panels up to 3/8 inch thickMounting stems are 15/32 inches long; 15/32 inch-32 thread diameterManufacturer part number 50-12071

Seachoice 2-Position Illuminated Toggle Switch, On/Off - 12201 - 50-12201F1

Max panel thickness: 1/4 inch Two-position on/off toggle switch is suitable for the operation of running and anchor lights, bilge pumps, blowers and baitwell pumpsSuitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and moreIncludes locking ring and cap nutTerminals: 3Max panel thickness: 1/4 inchManufacturer part number 50-12201

Seachoice 2-Position Off/Momentarily On Push Button Switch, 6-36V, 18 Gauge Wire Leads - 11761 - 50-11761F1

The Seachoice 2-Position Off/Momentarily On Push Button Switch is a single pole, single throw switch that turns one circuit on and off. It's ideal for any single circuit requiring an On/Off style switch. Marine-grade construction and seals ensure resistance to moisture and debris. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Ideal for any single circuit requiring an On/Off style switchSingle pole, single throw switch turns one circuit on and offPlasticized body sealed against moisture and debrisBlack moisture repellent rubber button coverNominal voltage is 6 to 36V DC2 (two) 18-gauge wire leads; 12 inches longSwitch is 15/16 inches in length x 5/8 inch diameter stem; fits panels up to 1/2 inch thickManufacturer part number 50-11761

Seachoice 2-Position Push Button Starter/Horn Switch - 11781 - 50-11781F1

With a chrome plated brass face nut, brass washer and back-up hex nut, this heavy duty push button switch provides lasting durability for reliable operation. 2-positions include Off © Momentary On. Mounting stems are 1-1/4 inch in length with 5/8 inch © 32 thread. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Two-position push button design is ideal for use as a horn or starter switchMax Panel Thickness: 1 inchMounting Stem Length: 1-1/4 inchIncludes brass washer and back-up nut,stainless steel springs25A @ 6V. 15A @ 12VManufacturer part number 50-11781

Seachoice 2-Position Push-Pull Switch, Off/On - 11931 - 50-11931F1

Max Panel Thickness: 1 inch Two-position, multipurpose off/on switch is suitable for many general applications including the operation of lights, bilge pumps, blowers and baitwell pumpsChrome plated plastic knobChrome plated brass face nut, washer and back-up nut for added durabilityCircuits: 1Max Panel Thickness: 1 inchRating: 25A@6VDC, 15A@12VDCManufacturer part number 50-11931

Seachoice 2-Position Toggle Switch, On/Off - 12001 - 50-12001F1

The Seachoice 2-Position On/Off Toggle Switch is ideal for lights, blowers, and pumps. It features a black plastic paddle and locking ring with level se3al and knurled cap nut, and is sealed to resist water penetration. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. 2-position On/Off toggle switch is ideal for lights, blowers, and pumpsBlack plastic paddle and locking ring with level seal and knurled cap nutSealed to resist water penetrationRequires 15/32 inch mounting hole for installationFits panels up to 1/4 inch thickManufacturer part number 50-12001

Seachoice 2" Diameter White Slam Latch - 18-3077 - 50-35521F1

Corrosive resistant 2" diameter accommodates material thickness from 7/16" to 7/8".

Seachoice 20291 Gold-Flo High Performance Electronic 34 Gph Fuel Pump Kit 5.5 - 4 Psi - 50-20291 - 50-20291F1

This rugged, lightweight, solid state fuel pump provides the high output performance required by heavy duty construction, agricultural, industrial, marine or military equipment in addition to the power plant requirements of sports cars, sedans, light trucks and SUV's. Compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. 24" Lift. 20291: 1/4 x 18 Thread w/o Shut-Off Valve, 24" Lift Easy to installCoast Guard ignition test approved74 Micron filter includedReliable solid state design provides longer lifeMade in U.S.A. by FACET

Seachoice 20391 Clear Gas & Diesel Fuel Filter For Cube Electronic Fuel Pump Kit, 3/8" - 50-20391 - 50-20391F1

Gasoline And Diesel Fuel Filter for Cube and POSI-FLO® Fuel Pumps.Compatible with gasoline, diesel, biodiesel, E85, and fuel additives. 74 micronInstalls directly to the inlet of the Cube and POSI-FLO® fuel pump8X more total surface area than the 479735 and FEP735 filtersUL ListedClear housing to ensure proper fuel filter maintenanceTorque 10 foot poundsThreads: 1/8"-27

Seachoice 20401 Steel Gas & Diesel Fuel Filter For Cube Electronic Fuel Pump Kit, 5/16" - - 50-20401F1

Gasoline And Diesel Fuel Filter for Cube and POSI-FLO® Fuel Pumps.Compatible with gasoline, diesel, biodiesel, E85, and fuel additives. 74 micronInstalls directly to the inlet of the Cube and POSI-FLO® fuel pump8X more total surface area than the 479735 and FEP735 filtersUL ListedClear housing to ensure proper fuel filter maintenanceTorque 10 foot poundsThreads: 1/8"-27

Seachoice 20711 90 Degree Brass Fuel Elbow - 50-20711 - 50-20711F1

All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.

Seachoice 20851 90 Degree Brass Fuel Elbow - 50-20851 - 50-20851F1

All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.

Seachoice 20861 90 Degree Brass Fuel Elbow - 50-20861 - 50-20861F1

All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.

Seachoice 20871 90 Degree Brass Fuel Elbow - 50-20871 - 50-20871F1

All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.

Seachoice 20881 90 Degree Brass Fuel Elbow - 50-20881 - 50-20881F1

All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Seachoice 20911 Fuel/Water Separator Canister Only - 20911 - 50-20911 Superseded By: 50-20934F1

Universal 3/8" Ports. 20911 Replaces:Seachoice 20911, Valmar 52113, Sierra 7844, Racor PFF 5510, Moeller 03332410, Mercury 35-802893Q01, Marpac 7-0860

Seachoice 20913 Fuel/Water Separator Filter Only - 20913 - 50-20913 Superseded By: 50-20933F1

10 Micron 10 MicronMeets OEM specifications

Seachoice 20914 Fuel/Water Separator Filter Only - 20914 - 50-20914 Superseded By: 50-20936F1

10 MicronMeets OEM specifications

Seachoice 20916 Fuel/Water Separator Filter Only - 20916 - 50-20916 Superseded By: 50-20937F1

10 MicronMeets OEM specifications

Seachoice 20917 Fuel/Water Separator Filter Only - 20917 - 50-20917 Superseded By: 50-20938F1

10 MicronMeets OEM specifications

Seachoice 20937 Fuel/Water Separating Filter - Sfc-85450-V106 - 50-20937F1

Replaces: Volvo: 3852413, 3851218 & 3862228; OMC: 502906; Sierra: 18-7989; Mercury Marine: 35-8M015477210 MicronRemoves water contamination to ensure only clean and pure fuel is delivered to the engineFor use with 2 and 4 stroke outboard enginesWater-shedding Cellulose filter element ensures clean fuelCoated steel canister prevents corrosionProduced in an ISO (TS1649) Certified Facility to meet or exceed industry standards

Seachoice 20951 Fuel Water Separating Filter Only - 20951 - 50-20951 Superseded By: 50-22304F1

10 MicronMeets OEM specifications

Seachoice 21071 Premium Oil Filter - 21071 - 50-21071 Superseded By: 50-21001F1

20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance

Seachoice 21073 Premium Oil Filter - 21073 - 50-21073 Superseded By: 50-21006F1

20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance

Seachoice 21074 Premium Oil Filter - 21074 - 50-21074 Superseded By: 50-21007F1

20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance

Seachoice 21076 Premium Oil Filter - 21076 - 50-21076 Superseded By: 50-21024F1

20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance

Seachoice 21223 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 3/8" X 50' - 315-0386 - 50-21223F1

Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).

Seachoice 21233 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/16" X 50' - 315-0566 - 50-21233F1

Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).

Seachoice 2127 Leveling Block Caps4 Pack (Caps Only) - 590-2127 - 590-2127F1

Distributes vehicle weight more evenly-creates a more stable / secure surface Distributes vehicle weight more evenly-creates a more stable / secure surfaceSafe, versatile, and easy to useEasy to clean heavy duty polypropyleneCap provides a flat mounting surfaceHi-Vis GreenPad / Cap Size: 8-1/2" x 8-1/2" x 1-1/8"Includes a durable carry/storage bag Do not stack more than 4 high. Do not use with any other leveling block system.

Seachoice 2128 Leveling Blocks10 Pack (8 Pads + 2 Caps) - 590-2128 - 590-2128F1

Distributes vehicle weight more evenly-creates a more stable / secure surface Distributes vehicle weight more evenly-creates a more stable / secure surfaceSafe, versatile, and easy to useEasy to clean heavy duty polypropyleneCap provides a flat mounting surfaceHi-Vis GreenPad / Cap Size: 8-1/2" x 8-1/2" x 1-1/8"Includes a durable carry/storage bag Do not stack more than 4 high. Do not use with any other leveling block system.

Seachoice 21371 Fuel Line Assemblies - Outboard Engines Omc/Johnson/Evinrude, 3/8" X 6' - 21371 - 50-21371F1

Meets all EPA, CARB, USCG and ABYC Requirements Includes: Low permeation primer bulb, fuel line fittings, stainless steel hose clamps and 3/8" fiber-reinforced fuel line for additional strength and kink resistance. Faster priming fuel line assembly with 3/8" ID ensures maximum fuel flow to meet today's higher horsepower enginesKink resistant heavy duty fuel lineCompatible with ethanol blended fuelsBulb engineered to maintain flexibility and prevent collapse in hot and cold temperaturesSpring loaded check valves ensure for quicker primer in any position vertical or horizontalStainless Steel Clamps to ensure leak free connections

Seachoice 21381 Low Perm Fuel Line Kit - Yamaha, 3/8" X 6' - 21381 - 50-21381F1

Meets all EPA, CARB, USCG and ABYC Requirements Includes: Low permeation primer bulb, fuel line fittings, stainless steel hose clamps and 3/8" fiber-reinforced fuel line for additional strength and kink resistance. Fast priming high output primer bulbKink resistant heavy duty fuel lineCompatible with ethanol blended fuelsEngineered low permeation material prevents fuel evaporation, saving fuel and moneyBulb engineered to maintain flexibility and prevent collapse in hot and cold temperaturesIndustry leading vertical fuel draw for priming in any application

Seachoice 23001 Gas Tank Vent For 5/8" Hose - 50-23001 - 50-23001F1

23001: Reinforced black nylon with stainless-steel screen flame arrestor.

Seachoice 23061 90 Degree Stainless Steel Flush Mount Fuel Vent For 5/8" Hose - 50-23061 - 50-23061F1

On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage - or be damaged by hull bumps and scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system.

Seachoice 23351 Stainless-Steel Mini Hose Clamps, 5/16" Band, Size #4, 10/Bx - 23351 - 50-23351F1

Precision-engineered for smaller hoses, Seachoice mini clamps have a low-profile housing for easy installation in tight spaces. 10-15 Inch-lbs. recommended installation torque. High-grade stainless steel1/4" Hex headSold by the box.

Seachoice 23353 Stainless-Steel Mini Hose Clamps, 5/16" Band, Size #5, 10/Bx - 23353 - 50-23353F1

Precision-engineered for smaller hoses, Seachoice mini clamps have a low-profile housing for easy installation in tight spaces. 10-15 Inch-lbs. recommended installation torque. High-grade stainless steel1/4" Hex headSold by the box.

Seachoice 23354 Stainless-Steel Mini Hose Clamps, 5/16" Band, Size #6, 10/Bx - 23354 - 50-23354F1

Precision-engineered for smaller hoses, Seachoice mini clamps have a low-profile housing for easy installation in tight spaces. 10-15 Inch-lbs. recommended installation torque. High-grade stainless steel1/4" Hex headSold by the box.

Seachoice 23356 Stainless-Steel Mini Hose Clamps, 5/16" Band, Size #8, 10/Bx - 23356 - 50-23356F1

Precision-engineered for smaller hoses, Seachoice mini clamps have a low-profile housing for easy installation in tight spaces. 10-15 Inch-lbs. recommended installation torque. High-grade stainless steel1/4" Hex headSold by the box.

Seachoice 23357 Stainless-Steel Mini Hose Clamps, 5/16" Band, Size #10, 10/Bx - 23357 - 50-23357F1

Precision-engineered for smaller hoses, Seachoice mini clamps have a low-profile housing for easy installation in tight spaces. 10-15 Inch-lbs. recommended installation torque. High-grade stainless steel1/4" Hex headSold by the box.

Seachoice 23363 Plated Screw Hose Clamps, 5/16" Band, Size #4, 10/Bx - 50-23361 - 50-23361F1

Seachoice plated screw clamps have a 5/16" or 1/2" band and low-profile housing for easy installation in tight spaces. They are precision engineered and made partly of stainless steel. Sold by the box. Suitable for non-corrosive environments only.

Seachoice 23363 Plated Screw Hose Clamps, 5/16" Band, Size #6, 10/Bx - 50-23363 - 50-23363F1

Seachoice plated screw clamps have a 5/16" or 1/2" band and low-profile housing for easy installation in tight spaces. They are precision engineered and made partly of stainless steel. Sold by the box. Suitable for non-corrosive environments only.

Seachoice 23364 Plated Screw Hose Clamps, 1/2" Band, Size #10, 10/Bx - 50-23364 - 50-23364F1

Seachoice plated screw clamps have a 5/16" or 1/2" band and low-profile housing for easy installation in tight spaces. They are precision engineered and made partly of stainless steel. Sold by the box. Suitable for non-corrosive environments only.

Seachoice 23366 Plated Screw Hose Clamps, 1/2" Band, Size #12, 10/Bx - 50-23366 - 50-23366F1

Seachoice plated screw clamps have a 5/16" or 1/2" band and low-profile housing for easy installation in tight spaces. They are precision engineered and made partly of stainless steel. Sold by the box. Suitable for non-corrosive environments only.

Seachoice 23367 Plated Screw Hose Clamps, 1/2" Band, Size #20, 10/Bx - 50-23367 - 50-23367F1

Seachoice plated screw clamps have a 5/16" or 1/2" band and low-profile housing for easy installation in tight spaces. They are precision engineered and made partly of stainless steel. Sold by the box. Suitable for non-corrosive environments only.

Seachoice 23369 Plated Screw Hose Clamps, 1/2" Band, Size #28, 10/Bx - 50-23369 - 50-23369F1