Select Category
Brands
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with two #6 FH fasteners (not included).
Seadog 6725601 Fender Hook, Sold Each - 672560-1 - 354-6725601F1
This Fender Hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" line. The spring loaded hook keeps line captive against surface. Constructed of corrosion resistant investment cast 316 stainless steel with rubber gasket. Requires two #8 FH fasteners (not included).
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271423 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727142-3 - 354-7271423F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271453 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727145-3 - 354-7271453F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog Adjustable Pantographic Wiper Arm - 304 Stainless Steel - Black Finish - 413322-1 - 354-4133221F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 13"-18" - 413368B-1 - 354-413368B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 19"-24" - 413374B-1 - 354-413374B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413317-1 - 354-4133171F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413319-1 - 354-4133191F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327122-1 - 354-3271221F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327124-1 - 354-3271241F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413111B-1 - 354-413111B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413114B-1 - 354-413114B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413124B-1 - 354-413124B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 13"-18" - 413268B-1 - 354-413268B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 19"-24" - 413274B-1 - 354-413274B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style, 13"-18" - 413168B-1 - 354-413168B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style, 19"-24" - 413174B-1 - 354-413174B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog All Around Light - 400020-1 - 354-4000201F1
Injection molded polycarbonate/stamped stainless steel. Fastener #6 RH.
Seadog Anchor Swivel | Investment Cast 316 Stainless Steel - 182608-1 - 354-1826081F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Seadog Anchor Swivel | Investment Cast 316 Stainless Steel - 182612-1 - 354-1826121F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Seadog Berth Light - 400400-1 - 354-4004001F1
This Birth Light is constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA150 style base and G4 bulb (sold separately). Designed for bulkhead or wall mounting. Installs with three #6 RH fasteners (not included). 12VDC.
Seadog Bilge Water Alarm Panel W/Pump Switch - 423035-1 - 354-4230351F1
Provides an audible and visual means of warning if the water level in your bilge is beyond your bilge pump float switch level. There is no need for a separate bilge pump switch as the control switch selects between automatic and manual (momentary on) function of the bilge pump. Rated at 15 Amps.Not for use with pumps that have built-in switches.
Seadog Bow Chocks - 316 Stainless Steel - 060040-1 - 354-0600401F1
Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included).
Seadog Bow Chocks - 316 Stainless Steel - 060043-1 - 354-0600431F1
Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included).
Seadog Buss Bar Stud Terminal, 100A - 426718-1 - 354-4267181F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 150A - 426728-1 - 354-4267281F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 250A - 426738-1 - 354-4267381F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205242 - 354-205242F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205243 - 354-205243F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205244 - 354-205244F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205246 - 354-205246F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Cast Polished Brass Bell - #6 Fastener - 455001 - 354-455001F1
These Bells are constructed of improved cast brass (not lower grade spun brass). Meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4") to 20m (65.6") in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Cast Polished Brass Bell | #6 Fastener - 455720 - 354-455720F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Mirror polished brass finish.
Seadog Cast Polished Brass Bell | #6 Fastener - 455721 - 354-455721F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Chain Stopper Formed 304 Stainless Steel - 321820-1 - 354-3218201F1
Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for.Fits chain sizes 3/16"- 1/4".
Seadog Chain Stopper Formed 304 Stainless Steel - 321825-1 - 354-3218251F1
Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for.Fits chain sizes 5/16"- 3/8".
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331335-1 - 354-3313351F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331340-1 - 354-3313401F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331350-1 - 354-3313501F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Combination Soft Bristle Brush & Squeegee - 491075-1 - 354-4910751F1
The Boat Hook Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. This soft brush is constructed of injection molded nylon with a marine grade silicone rubber squeegee. Soft bristles are scratch resistant for gelcoat, paint, and plastic windows.
Seadog Deck Step | Injection Molded Rubber & Stamped 304 Stainless - 328013-1 - 354-3280131F1
This Deck Step is lined with injection molded rubber to facilitate traction and framed by stamped 304 stainless steel for corrosion resistance and durability.
Seadog Deluxe Hand Held Rope Cutter - 300095-3 - 354-3000953F1
Easily cuts nylon, polyester, polypropylene and Dacron cordage and webbing Cuts and heat seals at the same timeReplaceable blade heats to 1100° Fahrenheit (600° Celsius) in less than 10 secondsBrass bristle cleaning brush, T-handle Allen wrench, and carrying case included10' heavy-duty grounded cordETL listed
Seadog Double Pole Double Throw 8 Terminal Blade Light Tip 12V 15 Amp Toggle Switch - 420128-1 - 354-4201281F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog Drain Tube Flaring Tool - 520290-1 - 354-5202901F1
Drain Tube Flaring Tools for installing 1" drain tubes. Can be used to install all of Sea-Dog® Drain Tubes (520210-520430). Handy item for any toolbox. Drain tube not included.
Seadog Dual Round Voltmeter - 421616-1 - 354-4216161F1
This digital dual voltmeter displays voltage for main and auxiliary batteries simultaneously. The compact size allows installation in a wide variety of locations. Red LED display. IP65 rating. Injection molded nylon.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521125 - 354-521125F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521130 - 354-521130F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Fillet Table Rod Holder Mount - 326510-3 - 354-3265103F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders
Seadog Fillet Table Rod Holder Mount - 326515-3 - 354-3265153F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holdersHose holder and towel bar
Seadog Flush Mount Combo Drink Holder W/Drain Fitting - 588065 - 354-588065F1
Flush Mount Combo Drink Holders with Drain Fittings feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed of corrosion resistant stamped 304 stainless steel.
Seadog Flush Mount Stainless Steel Rod Holder - 325176-1 - 354-3251761F1
Flush Mount Rod Holders are constructed of corrosion resistant formed 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Seadog Grab Handle, Black - 227560-1 - 354-2275601F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Grab Handle, White - 227561-1 - 354-2275611F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Hand Rail Bow Form, Outside Diameter 7/8", 316 Stainless - 295110-1 - 354-2951101F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321291-1 - 354-3212911F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321292-1 - 354-3212921F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Pull - 222420-1 - 354-2224201F1
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270166-1 - 354-2701661F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270167-1 - 354-2701671F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Horizontal Mount Side Lights, 1 Pr. - 400165-1 - 354-4001651F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog Large Boat Hook Mooring Buoy Snap Kit - 491058-1 - 354-4910581F1
The Large Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat. The large size works on cleats up to 24"! WLL - 2,185 lbs.
Seadog Led 12V Dc Telescopic All Around Light | Uscg 2 Nm Approved | #8 Fastener - 400016-1 - 354-4000161F1
LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254509-1 - 354-2545091F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254512-1 - 354-2545121F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led Day/Night Dome Light, 5" - 400353-1 - 354-4003531F1
These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401350-1 - 354-4013501F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401354-1 - 354-4013541F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Surface Mount Courtesy Edge Light, Blue - 401379-1 - 354-4013791F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Surface Mount Courtesy Edge Light, White - 401375-1 - 354-4013751F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Surface Mount Courtesy Light, Blue - 401409-1 - 354-4014091F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life blue LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, White - 401405-1 - 354-4014051F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life warm white LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Lift Handle - 221275-1 - 354-2212751F1
Investment Cast 316 Stainless. Use #10 FH fasteners.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 12V - 432599-1 - 354-4325991F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 24V - 432598-1 - 354-4325981F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Maximum: 20A.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432610-1 - 354-4326101F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432611-1 - 354-4326111F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961 - 354-221961F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961L - 354-221961Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Op27001 Replacement Screw For Deck Hinges - Op27001 - 354-Op27001F1
Screw for 270160, 270161, 270200, 270230 & 270240
Seadog Op27002 Release Pin For 270210, 270235 & 270245 - Op27002 - 354-Op27002F1
Release Pin for 270210, 270235 & 270245
Seadog Op273031 Replacement Screw For Deck Hinges - Op27303-1 - 354-Op273031F1
Screw for 2732501 & 2732711
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405691-1 - 354-4056911F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405693-1 - 354-4056931F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Plastic Led 12V Dome Light With On / Off Switch | #8 Fastener - 401725-1 - 354-4017251F1
LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog Plastic Led 12V Dome Light With On / Off Switch | #8 Fastener - 401727-1 - 354-4017271F1
LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412211B-3 - 354-412211B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412218B-3 - 354-412218B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412221B-3 - 354-412221B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412228B-3 - 354-412228B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412231B-3 - 354-412231B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412238B-3 - 354-412238B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412211W-3 - 354-412211W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
