Select Category
Brands
T-H Marine Rigging Flange For 2" Id Hose - Rf1Cpdp - 232-Rf1Cpdpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf1Dp - 232-Rf1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf2Dp - 232-Rf2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange Hose Union For 2" Hose With 3/4" Fuel Hose Port, Black - Rffhp1Dp - 232-Rffhp1Dpf1
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose.
T-H Marine Rigging Flange Hose Union For 2" Hose, Black - Rfhu1Dp - 232-Rfhu1Dpf1
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose.
T-H Marine Rigging Hose 2" X 50' - Rfh1Dp - 232-Rfh1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Hose 2" X 50' - Rfh2Dp - 232-Rfh2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Hose 2" X 50' - Rfh3Dp - 232-Rfh3Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rmc102Mgdp Troll-Tamer Trolling Motor Stabilizer Lock For Motorguide Tour Series - Rmc-102Mg-Dp - 232-Rmc102Mgdpf1
Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, it has been designed and tested in the nastiest conditions by top touring pros. Prevents Damage to Trolling MotorsLocks Motor to Deck SecurelyLocking Pin with Quick Release Toe Kick BaseAll Stainless Steel © No Rust or Corrosion
T-H Marine Rod Tamer Rod Straps - Rt14Dp - 232-Rt14Dpf1
Deck MountMolded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Will not get hung up on fish hooks, lose their hold when wet, or fade. The strap stretches over rods and hooks into a loop mounted on the deck. (Mounts with one countersunk screw).
T-H Marine Rod Tamer Rod Straps - Rt18Dp - 232-Rt18Dpf1
Deck MountMolded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Will not get hung up on fish hooks, lose their hold when wet, or fade. The strap stretches over rods and hooks into a loop mounted on the deck. (Mounts with one countersunk screw).
T-H Marine Rod Tamer Rod Straps, 12" Gunwale Mount, Holds Up To 3 Rods - Rhd1Dp - 232-Rhd1Dpf1
Strap is molded of black poly material that mounts on the gunnel and stretches to hook to a loop mounted on the deck. Installs very easily in a 3/4" diameter hole with the black stainless steel screws that are included. Strap retracts into the gunnel when not in use.
T-H Marine Saf-T-Stop™ Ignition Kill Switch For Single Outboard - Ks1Dp - 232-Ks1Dpf1
Meets all requirements for emergency stop switches Strong coiled lanyardIsolated circuits on dual units to prevent feedbackMounts anywhere - requires 1-1/2" hole
T-H Marine Screw Down Deck Plate 10" Od, Fish White - Sdp3Fwdp - 232-Sdp3Fwdpf1
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material.
T-H Marine Screw Down Deck Plate 5-5/8" Od, Black - Sdp1Dp - 232-Sdp1Dpf1
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material.
T-H Marine Screw Down Deck Plate 8" Od, Black - Sdp2Dp - 232-Sdp2Dpf1
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material.
T-H Marine Screw In Overflow Drain Tube Fits 1-1/8" Threaded Drain With Top Screen Glued, 12" L - Odt112Gstw - 232-Odt112Gstwf1
Includes top screen Threaded sealUnscrew half way to expose drain holes
T-H Marine Shark Eye Nav Lights 1Nm (Pair) - Sel1Dp - 232-Sel1Dpf1
T-H Marine Shark Eye Nav Lights 1NM (Pair) Meets ABYC A-16 & USGC 1 NMNMMA type acceptedStainless steel baseTin wirePair: (1) Red, (1) Green
T-H Marine Ss3Dp Steer-Stop™ Outboard Hydraulic Steering Lock - Ss-3-Dp - 232-Ss3Dpf1
Locks hydraulic steering when traileringFits most steering cylinder rods on outboard enginesSnaps over outboards hydraulic steering cylinder rodsHelps keep engine centered during transportProtects steering system, outboard, and motor supportsIncludes cord to connect units for storage and to aid in removalGrip makes it even simpler and easier to put on and take off
T-H Marine Stainless Steel Cup Holder - Lch1Ssdp - 232-Lch1Ssdpf1
Top quality stainless steel. Fits most existing cup holes. Drain fits 3/8" hose.
T-H Marine Stainless Steel Wire Mesh Strainer Fits Aerator Pump Intake - As1Dp - 232-As1Dpf1
Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base.
T-H Marine Stainless Steel Wire Mesh Strainer Fits Th1, 1Xl, 90, 92 Thru-Hulls - As2Dp - 232-As2Dpf1
Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base.
T-H Marine Straight Extra Long Thru-Hull Fitting For Hose, White - Th1202Xldp - 232-Th1202Xldpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Straight Extra Long Thru-Hull Fitting For Hose, White - Th752Xldp - 232-Th752Xldpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Straight Thru-Hull Fitting For Hose, White - Th1202Dp - 232-Th1202Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Straight Thru-Hull Fitting For Hose, White - Th1502Dp - 232-Th1502Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Sure-Seal Deck Plate 6", Sand Shell - Dps63Dp - 232-Dps63Dpf1
Screw-Out StyleFeatures a fully overlapping lid and a positive 'O' ring seal insuring a watertight fit. No visible mounting fasteners. Total UV & chemical stability. No tools required for opening.
T-H Marine Sure-Seal Deck Plate 8" - Dps81Dp - 232-Dps81Dpf1
Screw-Out StyleFeatures a fully overlapping lid and a positive 'O' ring seal insuring a watertight fit. No visible mounting fasteners. Total UV & chemical stability. No tools required for opening.
T-H Marine Sure-Seal Deck Plate 8" - Dps82Dp - 232-Dps82Dpf1
Screw-Out StyleFeatures a fully overlapping lid and a positive 'O' ring seal insuring a watertight fit. No visible mounting fasteners. Total UV & chemical stability. No tools required for opening.
T-H Marine Torque Tab - Tab1Dp - 232-Tab1Dpf1
Eliminates or reduces right hand steering torque caused by jacked-up transom heights and high pitched propellers. Inexpensive, simple to install and does not reduce speed. Cast aluminum construction complete with installation hardware and instructions.
T-H Marine Transom Support Plate, Lower Bolt Holes - Standard - Tsp2Dp - 232-Tsp2Dpf1
Distributes the stress of the motor mounting boltsHigh quality cast aluminum 3/8" thickness
T-H Marine Transom Support Plate, Top Bolt Holes-Standard - Tsp1Dp - 232-Tsp1Dpf1
Distributes the stress of the motor mounting boltsHigh quality cast aluminum 3/8" thickness
T-H Marine Trim Handle - Ejt1Dp - 232-Ejt1Dpf1
Mounted directly to the throttle and shift lever for maximum safety and ease of operation. The switches are push button, weather proof and rated above what is required to operate a trim unit. Pre 1979 OMC.
T-H Marine Troll-Tamer Trolling Motor Stabilizer Lock - Rmc105Fmkdp - 232-Rmc105Fmkdpf1
Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, it has been designed and tested in the nastiest conditions by top touring pros. Prevents Damage to Trolling MotorsLocks Motor to Deck SecurelyLocking Pin with Quick Release Toe Kick BaseAll Stainless Steel © No Rust or Corrosion
T-H Marine Ttc1Dp Transom Trim Control - Ttc1Dp - 232-Ttc1Dpf1
Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions. Trim switch for outboards or stern drivesHydraulic jack plate switchWaterproof push button switchesPuts tilt & trim control anywhere you want itUV stable molded housing
T-H Marine Utility/Rod Grommets (Pair), Black - Ug1Dp - 232-Ug1Dpf1
Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).
T-H Marine Utility/Rod Grommets (Pair), Black - Ug2Dp - 232-Ug2Dpf1
Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).
T-H Marine Waterproof Blue Led Lighted Rim Drink Holder - Led-Lch-Bu-Dp - 232-Ledlchbudpf1
Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished LookLED Light System is WaterproofIncludes Drain Hole and Nipple for Routing DrainageWired for 12V
T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm171Cob-W-Dp - 232-Ledsm171Cobwdpf1
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection
T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm172Cob-B-Dp - 232-Ledsm172Cobbdpf1
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection
T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm173Cob-G-Dp - 232-Ledsm173Cobgdpf1
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection
T-H Marine Waterproof Stainless Steel Led Underwater Light - Led-Sm7815-B-Dp - 232-Ledsm7815Bf1
This surface mount, stainless steel underwater light is highly attractive, with superior brightness and durable construction. Completely waterproof, this 316 stainless steel bezel light will last for many years in the toughest marine environments. 5.7"x1.7" . Overheat ProtectionResistant to Corrosion, UV and ChemicalsFully Sealed and Waterproof Light - IP68 RatedVery Easy to Install with Two (2) Screws and Small Wiring HoleSix (6) Super Bright LED Diodes
T-H Marine Waterproof White Led Lighted Rim Drink Holder - Led-Lch-W-Dp - 232-Ledlchwdpf1
Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished LookLED Light System is WaterproofIncludes Drain Hole and Nipple for Routing DrainageWired for 12V
T-H Marine Z-Lock Manual Jack Plate For All V6 Outboards Up To 300Hp - Jpz6Dp - 232-Jpz6Dpf1
Built with full 1/2" aluminum with an exclusive Z-Lock design for the ultimate in strength and virtually no side slippage or movement, this jack plate handles all V6 outboards up to 300hp. Easily adjustable with a single center bolt adjustment point.
T-H Marine Zl-15 Z-Launch™ Launch Cord, 15' - Zl-15-Dp - 232-Zl15Dpf1
For solo watercraft launching. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Fasten a hook to your trailer, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water. No-hassle designAttaches easilyStay safe and dry launching your boat aloneGreat for ramps with "no power" lawsBoats 23' to 35' use 20' cordBoats 17' to 22' use 15' cordBoats to 16' use 10' cord
T-H Premium Underwater Light - Led-39060-Dp - 232-Led39060Dpf1
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire
T-H Premium Underwater Light - Led-39061-Dp - 232-Led39061Dpf1
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire
T-H Premium Underwater Light - Led-39062-Dp - 232-Led39062Dpf1
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire
T-H Underwater Light With Stainless Steel Bezel - Led-51900-Dp - 232-Led51900Dpf1
316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water
T-H Underwater Light With Stainless Steel Bezel - Led-51901-Dp - 232-Led51901Dpf1
316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water
T-Jack W/Lightsblk4000 Bell Rv Rvx - 38-944014 - 388-38944014F1
T-One Connector Repl. 119146 - 119147 - 220-119147F1
Draws power directly from the vehicle battery and uses less than 5 mA of the vehicle circuit for sensing to turn the trailer functions on and off Will work with either LED/Incandescent bulbs (vehicle & trailer)The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the convertor to turn on fully and gives the trailer lights full brightness during activationThe trailer brakes will override the hazard lamps when the brake is activatedThe unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuitWill work with most vehicles that have a multiplex system for lightingCan be used on a 2-wire or 3-wire systemIncludes integrated protective cover
T-One T-Connector Harness 4 Way Flat - 118847 - 220-118847F1
T-Stat,Ct Std-Blk-Boxed T-Stat Only 3316250.712 - 9600023358 - 951-9600023358F1
T-Stat,Ct Std-Wht-Boxed T-Stat Only 3316250.700 - 9600023355 - 951-9600023355F1
T&P Valve 1/2" W/4" Probe Replaces P/N 117-10423 Rvx - 10423 - 17-10423F1
T10262 Delta Davit-Big Water I Trac Outdoors Replaces P/N 452-T10262 - 69062 - 452-69062F1
Table Base 2 7/8 Anod - 3660107 - 169-3660107F1
Table Swivel 2-7/8 Anod - 3660207 - 169-3660207F1
Tablepost 2 7/8 Tl3 25 Brtdip - 3664250-Rv - 169-3664250Rvf1
Tablet Holders Works With All Tablets - 149 - 736-0149F1
Taco A500272Tal12D Aluminum Edge Molding - A50-0272Tal12D - 236-A500272Tal12Df1
Lightweight for tight radius bending 6000 series prime grade aluminum alloyDrilled and countersunk on 6" centers
Taco A500275Tal12D Aluminum Edge Molding - A50-0275Tal12D - 236-A500275Tal12Df1
Lightweight for tight radius bending 6000 series prime grade aluminum alloyDrilled and countersunk on 6" centers
Taco A500304Tal12 Aluminum T Hatch Trim 3/4" X 1-1/8" X 12' - A50-0304Tal12 - 236-A500304Tal12F1
For hatchcovers. Polished, clear anodized aluminum finish.
Taco A500326Tal12D Aluminum Edge/Transom Molding - A50-0326Tal12D - 236-A500326Tal12Df1
Lightweight for tight radius bending 6000 series prime grade aluminum alloyDrilled and countersunk on 6" centers
Taco A510102Tal12D Half Oval Alum 1/2 12' L - A51-0102Tal12D - 236-A510102Tal12Df1
For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish.
Taco A510104Tal12Da Alum Edge Trim 3/16 X 3/4 - A51-0104Tal12D-A - 236-A510104Tal12Daf1
For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish.
Taco A510106Tal12D Alum Rub Rail 1" X12' Cb - A51-0106Tal12D - 236-A510106Tal12Df1
For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish.
Taco A510149Tal12D Aluminum Drip Molding, 3/4" X 12' - A51-0149Tal12D - 236-A510149Tal12Df1
Drilled and countersunk on 6" centers 6000 series prime grade aluminum alloy
Taco Aluminum Overlap Rub Rail, 3/4" X 12' - A11-0151Tal12D - 236-A110151Tal12Df1
Designed for use without an insert. Easy tight radius bending as well as providing strength and protection. Polished, clear anodized finish to protect against the harsh marine environment. Models with a" D" suffix drilled and countersunk.
Taco Aluminum Rub Rail Overlap 1" X12' - A11-0152Tal12D-A - 236-A110152Tal12Daf1
Designed for use without an insert. Easy tight radius bending as well as providing strength and protection. Polished, clear anodized finish to protect against the harsh marine environment. Models with a" D" suffix drilled and countersunk.
Taco Ball & Socket Concave Deck Hinge - F13-0242/244Bn-1 - 236-F130242244Bn1F1
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Delrin insert provides smooth, rattle-free canvas top operation. Can also fit windshield headers. With quick release pull and D-ring pin. Fastener: #8 Flat head screw. 5-Year limited warranty.
Taco Ball & Socket Flat Deck Hinge - F13-0301/244Bn-1 - 236-F130301244Bn1F1
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Delrin insert provides smooth, rattle-free canvas top operation. Can also fit windshield headers. With quick release pull and D-ring pin. Fastener: #8 Flat head screw. 5-Year limited warranty.
Taco Ball & Socket Flat Deck Hinge - F130241244Bn1 - 236-F130241244Bn1F1
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Delrin insert provides smooth, rattle-free canvas top operation. Can also fit windshield headers. With quick release pull and D-ring pin. Fastener: #8 Flat head screw. 5-Year limited warranty.
Taco Ball & Socket Jaw Slide - F11-1001As-1 - 236-F111001As1F1
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Patented ball and socket pivot design offers full rotation. Delrin insert provides rattle free fit and smooth operation. Set screw fastener. 5 year limited warranty.
Taco Ball & Socket Top Cap (Side Mount), 7/8" - F11-0180S-1 - 236-F110180S1F1
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Patented ball and socket pivot design offers full rotation. Delrin insert provides rattle free fit and smooth operation. 1-1/8" tube entry depth. Set screw fastener. 5 year limited warranty.
Taco Ball & Socket Top Cap, 7/8" - F11-0177S-1 - 236-F110177S1F1
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Patented ball and socket pivot design offers full rotation. Delrin insert provides rattle free fit and smooth operation. 1-1/8" tube entry depth. Set screw fastener. 5 year limited warranty.
Taco F1602041 Outrigger Line Tensioner - Gunwale Mount - F16-0204-1 - 236-F1602041F1
If you rig your halyard lines to the gunnel of your boat, the Outrigger Line Tensioner is what you've been waiting for. Its sleek, stainless-steel, mushroom design allows halyard pulley blocks to be locked into place with zero effort. The Line Tensioner eliminates unattractive, and sometimes painful, "camel-back" cleats. Quick and easy installation using 3/4" drill bit through the gunnelMushroom head-threaded boltAdjustable for boats with 1" to 2-1/2" thick gunnelsEasy Ronstan medium cam cleat for 1/8" to 1/4" thick ropeHeavy-duty lock washer to prevent loosening from excess vibrationElectro-polished bracket with countersunk mounting holes
Taco F160276 Suproflex Rub Rail End Caps, Large, Stainless - F16-0276 - 236-F160276F1
Large end caps for Suproflex Rub Rail.
Taco F160800C1 "Come On Board" Handle Receiver - F16-0800C-1 - 236-F160800C1F1
For use with TACO Come On Board Handle. Manufactured from Type-304 stainless steelCast design with a 3" Dia. surfaceFits 1-1/2" Dia. handlesTapped for 1/4" hardware (not included)Matching backing plate for added strength and security
Taco F313504Bsa1 4 Rod Transom Mount Rod Rack - F31-3504Bsa-1 - 236-F313504Bsa1F1
Brushed anodized aluminum Mounts to transom - maximize rod storageAdjust rack angle to fit any boat's transomEasy bolt-on installation
Taco F386810B 4" Rub Rail Mounted Led Navigation Light Set - F38-6810B - 236-F386810Bf1
Sleek, low-profile lights designed to allow for cleaner, open decks with unobstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation, have a water-resistant IP68 rating and provide hours of maintenance-free, reliable use. Ideal for up to 30' boats and designed to fit the popular 3/4-inch insert profilesSold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck space and easy to installProvides a 112.5° unobstructed view with less glareCertified for ABYC/USCG-approved 2 NMLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationLED lights are mounted in a heavy gauge polished stainless-steel joiner coverWater-resistant IP68 ratingRequires #8 stainless-steel fastener (not included)
Taco F389960 2-9/16" Suproflex Mounted Led Navigation Light Set - F38-9960 - 236-F389960F1
Designed specifically for SuproFlex. This sleek, low-profile navigation light fits V11-9960, V11-9990 and V11-9950 (OEM only) SuproFlex profiles, meets ABYC and USCG requirements for both sail and powerboat designation and has a water-resistant IP68 rating for hours of maintenance-free use. Ideal for boats up to 30'Sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck spaceEasy to installProvides a 112.5-degree unobstructed view with less glareMeets ABYC/USCG requirements for both sail and powerboat designationLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationWater-resistant IP68 ratingUses #8 stainless steel fasteners, not included
Taco Grand Slam 312 Center Rigger Mount - Gs-312 - 236-Gs312F1
A center rigger mount designed for longer outrigger poles and for the offshore performance requirements of the large center console boats on the market today that are equipped with triple and quad engines. Increases the efficiency of deploying long baits when trolling offshore by using the innovative rotating lever handle to raise and lower the center rigger from under the hard top.Large gusset support for long runs at high speedsFixed position mount straight backFull function deployment without climbing on hard top, fly bridge or towerEasily raise and lower the center rigger while standing on the deckAccomodates up to 2 Hard TopsDesigned for 1-1/2" dia. polesStainless steel Type-316L arms and crank handles, anodized aluminum housing and rotator
Taco Gs300 Grand Slam 300 Outrigger Mount, 1 Pr - Gs-300 - 236-Gs300F1
Ideal for boats 25' to 40'Constructed from stainless steel and aluminum (No plastic components)Arm lifts up to 46.5° from horizontal position for kite fishing and dock clearancePairs with 1-1/2" DIA Outrigger Poles up to 22'Can be used with Outrigger Base Reducer for 1-1/8" DIA polesErgonomic, single-hand crank handle with ball bearingUnique, locking flip handleAllow a controlled 180° rotation, if neededLocking head eliminates downward creep of outrigger polesIncludes mounting hardware for easy installation3-year limited warrant
Taco Gs390 Grand Slam 390 Outrigger Top Mount W/Crank, 1 Pr. - Gs390 - 236-Gs390F1
This base is perfect for the bigger, faster center console boats between 25' and 40'. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. Ideal for boats 25' - 40'Safely control lift and rotation from under the topOffset handle for better hand clearancePairs with 1-1/2" TACO 18' deluxe aluminum and 16' and 20' carbon fiber tele-outriggers with locking pin
Taco Gs390Xl Grand Slam 390Xl Outrigger Top Mount W/Crank, 1 Pr. - Gs390Xl - 236-Gs390Xlf1
Ideal for boats 25' - 50' with hardtops up to 4-1/2" thick. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. Ideal for boats 25' - 50'Safely control lift and rotation from under the topOffset handle for better hand clearancePairs with 1-1/2" TACO 18' deluxe aluminum and 16' and 20' carbon fiber tele-outriggers with locking pin
Taco Gs500 Pro Series Mount, 1 Pr. - Gs-500 - 236-Gs500F1
the GS-500 enables anglers to adjust the lift and rotation of outrigger poles from the safety of the deck. This mount also features patent-pending Twist & Lock pole connection. Eliminates the need for pins or bolts when securing outrigger poles. Mount is Ideal for boats from 32 to 50-plus feet. Constructed from cast stainless-steel and machined aluminum for a stronger, lighter base and includes matching 6"x 8"x 1/2" thick oval backing plates. 3-year limited warranty.
Taco Gs8001 Grand Slam Universal Antenna Mount - Gs-800-1 - 236-Gs8001F1
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater. Safe, no-hassle raising and lowering of a VHF antennaNo more climbing on T-tops or gunnelsStandard 1"-14 thread (male) shaft to accept standard VHF antennasMachined / Anodized aluminum bodyLight brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRoller bearings in crank assemblyMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate (hardware not included)Made in the USA1-year limited warranty
Taco Gs850 Grand Slam Electric Vhf Antenna Mount - Gs-850 - 236-Gs850F1
Designed with safety and innovation in mind, boaters can adjust the position of their antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Standard 1"-14 thread (male) shaft to accept standard antennas up to 8'No under-mount clearance requiredMachined / Anodized aluminum body with a light brushed finishThreaded shaft for consistent lift and descentDelrin bearings for smooth operationFeatures breakaway pin for manual adjustmentKit includes drill template and installation instructionsIncludes 6" lead for 12-volt DC power supply for lift and descentAccepts 7A fuse in the main +12 VDC power feed (not included)
Taco Gs860 Grand Slam 860 Electric Vhf Antenna Mount - Gs-860 - 236-Gs860F1
Polished stainless-steel body with a mirrored finishSmooth lift and descentStandard 1"-14 thread (male) shaft accommodates standard VHF antennas up to 8'No under-mount clearance neededHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on breakaway pin allows for manual operation in case of power failureElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descent1-year limited warranty
Taco Gs90 Grand Slam 900 Electric Masthead Anchor Light, 39-1/4" - Gs-950 - 236-Gs950F1
With the simple push of a button, boaters can safely adjust the position of their Masthead Anchor Light from the comfort of the helm. Ideal for powered vessels 39' and under (12-meters and under), the GS-950 is certified for USCG-required 3 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Machined / Anodized aluminum bodyCertified for USCG-required 3-nmIncludes tube, light and 6" lead for 12-volt DC power supply for lightThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRemovable pin for manual adjustmentMounts to all hardtopsFour 3-watt LED Cree chips6-Watt Stern Light and 12-watt Anchor
Taco Gs9001 Grand Slam 900 Masthead Anchor Light, 39-1/2" - Gs-900-1 - 236-Gs9001F1
Safe, no-hassle raising and lowering of an masthead anchor light Ideal for boats 39' in length or shorterCertified USCG for 3 NMStandard 1"-14 thread (male) shaftIncludes 32.75" of tube that can be cut to lengthFour 3-watt LED Cree chipsWater-resistance IP66 ratingMachined / Anodized aluminum body with a light brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate
Taco Gs960 Grand Slam 960 Electric Masthead Anchor Light, 3-Nm, 40.43" - Gs-960 - 236-Gs960F1
The oblong design accommodates a longer, more powerful motor for excellent performance at sea. Suitable for powered vessels up to 39' (12 meters). This is a fully electric unit with a hidden base wire inside the hardtop, which easily installs to the top's surface. The GS-960 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Certified for USCG-required 3-NMIncludes heavy-duty anodized aluminum tube, light and 6" lead of 20-gauge wire from the base5-Watt Stern Light and 10-watt AnchorLow-draw, 0.6 amps per lightElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descentNo under-mount clearance neededSmooth lift and descentHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on the stainless-steel breakaway pin allows for manual operation1-year limited warranty
Taco Metals Cok-0001B-2 Standard Outrigger Release Clip - Cok-0001B-2 - 236-Cok0001B2F1
Quality components to upgrade and repair outrigger rigging.
Taco Metals Cok-0001T-2 Premium Outrigger Release Clip - Cok-0001T-2 - 236-Cok0001T2F1
Quality components to upgrade and repair outrigger rigging.
