Select Category
Brands
Bep 1001602 Kill Switch Lanyard Only - 1001602 - 969-1001602F1
Ideal for adding engine-stop safety to older boats. Switch & lanyard combo (1001601), or replacement lanyard only (1001602).
Bep 1001603 4 Position Ignition Switch - 1001603 - 969-1001603F1
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Nominal voltage is 12V/24V DCRated for 10A at 12V DC, 5A at 24V DCFits panels up to 3/8" thickReplaces Cole Hersee part number 95060-50
Bep 1001604 3 Position Ignition Switch - 1001604 - 969-1001604F1
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Nominal voltage is 12V/24V DCRated for 10A at 12V DC, 5A at 24V DCFits panels up to 3/8" thickReplaces Cole Hersee part number 95060-60
Bep 1001605 2 Position Ignition Switch - 1001605 - 969-1001605F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysNominal voltage is 12V DCRated for 10A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-489
Bep 1001606 3 Position Ignition Switch - 1001606 - 969-1001606F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysWeather resistant key slot and bootNominal voltage is 12V DCRated for ignition: 10A at 12V DC and start: 5A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-550-14
Bep 1001607 3 Position Ignition Switch - 1001607 - 969-1001607F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysNominal voltage is 12V DCRated for ignition: 10A at 12V DC and start: 5A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-550
Bep 1001609 4 Position Ignition Switch - 1001609 - 969-1001609F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysNominal voltage is 12V DCRated for accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-712
Bep 1001610 3 Position Ignition Switch - 1001610 - 969-1001610F1
Impact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection. Coded tumbler lock for added secutiry, includes two keysNominal voltage is 6-36V DCRated for 15A ignition, 5A start#8-32 screw terminalsFits panels upt to 7/8" thickReplaces Cole Hersee part number M-850
Bep 1001701 Rocker Switch Bracket, Triple, 2 Ends & 1 Center - 1001701 - 969-1001701F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001702 Rocker Switch Bracket, Double, Middle Section - 1001702 - 969-1001702F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001703 Rocker Switch Bracket, Single End, Left Or Right - 1001703 - 969-1001703F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001704 Rocker Switch, Off-On, Spst, 1/4" Blade Terminals - 1001704 - 969-1001704F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001705 Illuminated Rocker Switch, Off-On, Spst, Illuminated Red - 1001705 - 969-1001705F1
Single pole, single throw switch turns one circuit on and off. Switches snap-in mounting holes 0.55" x 1.13", fits panels 0.02" to 0.25" thickBlack plastic body with clear plastic rocker that illuminates red when ONReplaces Cole Hersee part number 54003
Bep 1001706 Curved Rocker Switch, Off/On, Spdt - 1001706 - 969-1001706F1
Single pole, double throw switch turns one of two circuits on. On/On position, can also be used as an On/Off by isolating terminal 3Fits panel hole .55" x 1.13", fits panel thickness .025" to .25"Replaces Cole Hersee part number 54007
Bep 1001707 Rocker Switch, Off-On, Spst, Screw Terminals - 1001707 - 969-1001707F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001708 Rocker Switch, Off-On, Spst, Screw Terminals, Illuminated Red - 1001708 - 969-1001708F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001709 Rocker Switch, Off-(On), Spst, 1/4" Blade Terminals - 1001709 - 969-1001709F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001710 Rocker Switch, On-Off-On, Spdt, 1/4" Blade Terminals - 1001710 - 969-1001710F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001711 Rocker Switch, (On)-Off-(On), Spdt, 1/4" Blade Terminals - 1001711 - 969-1001711F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001712 Rocker Switch, On-Off-On, Dpdt, 1/4" Blade Terminals - 1001712 - 969-1001712F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001713 Rocker Switch, (On)-Off-(On), Dpdt, 1/4" Blade Terminals - 1001713 - 969-1001713F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001714 Rocker Switch, Off-On, Spst, 1/4" Blade Terminals, Illuminated Red - 1001714 - 969-1001714F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001715 Rocker Switch, On-Off-On, Spdt, 1/4" Blade Terminals, Illuminated Red (2 Positions) - 1001715 - 969-1001715F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001716 Rocker Switch, Off-On, Spst, 1/4" Blade Terminals, Illuminated W/4 Interchangeable Colors - 1001716 - 969-1001716F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick 1001716 Includes 4 interchangeable lens covers: Amber, Clear, Red & Green
Bep 1001717 Rocker Switch Bracket, Single - 1001717 - 969-1001717F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001718 Rocker Switch Bracket, Plug Only - 1001718 - 969-1001718F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001801 Weather Resistant Contura Rocker Switch, Off-On, Spst, 1/4" Blade Terminals, Illuminated Amber - 1001801 - 969-1001801F1
Shock and weather resistant for use in harsh marine and industrial environmentsCompatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001802 Weather Resistant Contura Rocker Switch, Off-(On), Spst, 1/4" Blade Terminals - 1001802 - 969-1001802F1
Shock and weather resistant for use in harsh marine and industrial environments Compatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001803 Weather Resistant Contura Rocker Switch, On/Off/On, Spdt, 1/4" Blade Terminals, Illuminated Amber (2 Positions) - 1001803 - 969-1001803F1
Shock and weather resistant for use in harsh marine and industrial environments Compatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001804 Weather Resistant Contura Rocker Switch, (On)/Off/(On), Spdt, 1/4" Blade Terminals - 1001804 - 969-1001804F1
Shock and weather resistant for use in harsh marine and industrial environmentsCompatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001805 Weather Resistant Contura Rocker Switch, On-Off-(On), Spdt, 1/4" Blade Terminals, Illuminated Amber - 1001805 - 969-1001805F1
Shock and weather resistant for use in harsh marine and industrial environments Compatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001806 Weather Resistant Contura Dimmer Rocker Switch, (On)-Off-(On), Spdt, 1/4" Blade Terminals - 1001806 - 969-1001806F1
For use with dimmer controllers. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Cover is interchangeable with similar switches used as original equipment. Rating: 20A @12V DC, 15A @24V DCSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thickReplaces Cole Hersee part number 58332-24(On) in parenthesis indicates a momentary position
Bep 1001807 Weather Resistant Contura Rocker Switch, On-Off-(On), Dpdt, 1/4" Blade Terminals, Illuminated Amber - 1001807 - 969-1001807F1
Shock and weather resistant for use in harsh marine and industrial environmentsCompatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001808 Weather Resistant Contura Rocker Switch, On-Off-On, Dpdt, 1/4" Blade Terminals, Illuminated Amber (2 Positions) - 1001808 - 969-1001808F1
Shock and weather resistant for use in harsh marine and industrial environments Compatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001809 Weather Resistant Contura Dimmer Rocker Switch, (On)-Off-(On), Dpdt, 1/4" Blade Terminals - 1001809 - 969-1001809F1
Shock and weather resistant for use in harsh marine and industrial environments Compatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001810 Weather Resistant Contura Rocker Switch, Off-(On), Dpst, 1/4" Blade Terminals - 1001810 - 969-1001810F1
Shock and weather resistant for use in harsh marine and industrial environmentsCompatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001811 Weather Resistant Contura Rocker Switch, Off-On, Dpst, 1/4" Blade Terminals, Illuminated Amber - 1001811 - 969-1001811F1
Shock and weather resistant for use in harsh marine and industrial environments Compatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001812 Weather Resistant Contura Rocker Switch, On-On, Dpdt, 1/4" Blade Terminals, Illuminated Amber (2 Positions) - 1001812 - 969-1001812F1
Shock and weather resistant for use in harsh marine and industrial environmentsCompatible with 12V/24V systems, rated up to 20A (12V)Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
Bep 1001901 Plastic Handle Toggle Switch, Off-On, Spst, 1/4" Blade Terminals - 1001901 - 969-1001901F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1001902 Plastic Handle Toggle Switch, Off-On, Spst, #6©32 Screw Terminals - 1001902 - 969-1001902F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1001903 Plastic Handle Toggle Switch, On-Off-On, Spdt, #6©32 Screw Terminals - 1001903 - 969-1001903F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1001904 Plastic Handle Toggle Switch, (On)-Off-(On), Spdt, #6-32 Screw Terminals - 1001904 - 969-1001904F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1001905 Plastic Handle Toggle Switch, On-Off-On, Dpdt, 1/4" Blade Terminals - 1001905 - 969-1001905F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1001906 Illuminated Toggle Switch, Off-On, Spst, 1/4" Blade Terminals, Illuminated Red - 1001906 - 969-1001906F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1001907 Illuminated Toggle Switch, On-Off-On, Spdt, 1/4" Blade Terminals, Illuminated Red - 1001907 - 969-1001907F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1001908 Illuminated Toggle Switch, Off-On, Spst, #6©32 Screw Terminals, Illuminated Red - 1001908 - 969-1001908F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002001 Chrome Plated Toggle Switch, On-Off-On, Spdt, 1/4" Blade Terminals - 1002001 - 969-1002001F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002002 Chrome Plated Toggle Switch, Off-(On), Spst, #6-32 Screw Terminals - 1002002 - 969-1002002F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1002003 Sealed Dipped Toggle Switch, Off/(On), Spst, 8" Wire Leads - 1002003 - 969-1002003F1
Shock and weather resistant for use in harsh marine and industrial environments. 16 AWG 8" wire leads. Mounting stem 15/32".
Bep 1002004 Chrome Plated Toggle Switch, (On)-Off-(On), Spdt, #6-32 Screw Terminals - 1002004 - 969-1002004F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1002005 Sealed Dipped Toggle Switch, (On)'Off'(On), Spdt, 8" Wire Leads - 1002005 - 969-1002005F1
Shock and weather resistant for use in harsh marine and industrial environments. 16 AWG 8" wire leads. Mounting stem 15/32".
Bep 1002007 Sealed Toggle Switch, On-Off-On, Spdt, 10" Wire Leads - 1002007 - 969-1002007F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002008 Sealed Toggle Switch, On-On, Spdt, 10" Wire Leads - 1002008 - 969-1002008F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002009 Sealed Toggle Switch, (On)-Off-(On), Spdt, 10" Wire Leads - 1002009 - 969-1002009F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1002010 Sealed Toggle Switch, Off-On, Spst, 10" Wire Leads - 1002010 - 969-1002010F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002011 Sealed Dipped Toggle Switch, On-Off-On, Spdt, 8" Wire Leads - 1002011 - 969-1002011F1
Shock and weather resistant for use in harsh marine and industrial environments. 16 AWG 8" wire leads. Mounting stem 15/32".
Bep 1002012 Chrome Plated Toggle Switch, (On)-Off-(On), Dpdt, #6-32 Screw Terminals - 1002012 - 969-1002012F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1002013 Chrome Plated Toggle Switch, Off-On, Spst, 1/4" Blade Terminals - 1002013 - 969-1002013F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002014 Chrome Plated Toggle Switch, On-Off-(On), Dpdt, 1/4" Blade Terminals - 1002014 - 969-1002014F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1002015 Chrome Plated Toggle Switch, On-Off-(On), Spdt, #6-32 Screw Terminals - 1002015 - 969-1002015F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.(On) in parenthesis indicates a momentary position.
Bep 1002016 Sealed Dipped Toggle Switch, Off-On, Spst, 8" Wire Leads - 1002016 - 969-1002016F1
Shock and weather resistant for use in harsh marine and industrial environments. 16 AWG 8" wire leads. Mounting stem 15/32".
Bep 1002017 Chrome Plated Toggle Switch, Off-On, Dpdt, #6-32 Screw Terminals - 1002017 - 969-1002017F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002018 Chrome Plated Toggle Switch, On-Off-On, Dpdt, #6-32 Screw Terminals - 1002018 - 969-1002018F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002019 Toggle Switch Boot, Tipless - 1002019 - 969-1002019F1
UV resistant, resists cracking and discoloration 1002101 Full boot provides maximum protection. IP67 rated, will withstand saltwater and fresh water immersion up to 30 min.1002101 Tipless boot provides increase weather resistance while retaining the look of the stainless actuator
Bep 1002020 Toggle Switch Boot, Full - 1002020 - 969-1002020F1
UV resistant, resists cracking and discoloration 1002101 Full boot provides maximum protection. IP67 rated, will withstand saltwater and fresh water immersion up to 30 min.1002101 Tipless boot provides increase weather resistance while retaining the look of the stainless actuator
Bep 1002021 Chrome Plated Toggle Switch, Off-On, Spst, #6-32 Screw Terminals - 1002021 - 969-1002021F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002023 Chrome Plated Toggle Switch, Off-On, Spst, 6" Wire Leads - 1002023 - 969-1002023F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002024 Chrome Plated Toggle Switch, Off-On, Spst, #6-32 Screw Terminals - 1002024 - 969-1002024F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002025 Chrome Plated Toggle Switch, Off-On, Spst, #6-32 Screw Terminals - 1002025 - 969-1002025F1
Shock and weather resistant for use in harsh marine and industrial environments. 15/32" Mounting stem. A 1 to 1 replacment for many Cole Hersee switches.
Bep 1002101 Dimmer Switch W/Packard Connector, 4A @ 12V - 1002101 - 969-1002101F1
Controls incandescent light intensity from dim to bright. Not meant for LED lights. Nominal voltage 12V DC7/16" mounting hole, fits panels 1/4" thick
Bep 1002102 Dimmer Switch W/2" Wire Leads, 7A @ 12V - 1002102 - 969-1002102F1
Controls incandescent light intensity from dim to bright. Not meant for LED lights. Nominal voltage 12V DC7/16" mounting hole, fits panels 1/4" thick
Bep 1002201 Motor Reversing Solenoid, 75A - 1002201 - 969-1002201F1
Two solenoids in one saves money and simplifies wiring. Provides braking dynamic capability for permanent magnet motors when coils are not energized. Rated at 75A make and break at 12VDPDT intermittent dutyComparable to Cole Hersee part number 24450
Bep 1002203 Continuous Duty Solenoid, 65A - 1002203 - 969-1002203F1
Remotely switch high amperage loads with a low amperage on-off switch. Copper #10-32 thread ignition and ground terminalsCopper 5/16"-24 thread contact terminalsPlated steel case, copper contactsHex nuts and washers includedBracket mounting holes 5/16" x 19/32", 2-13/64" on centersUL and CE approved
Bep 1002204 Continuous Duty Solenoid, 85A - 1002204 - 969-1002204F1
Remotely switch high amperage loads with a low amperage on-off switch. Copper #10-32 thread ignition and ground terminalsCopper 5/16"-24 thread contact terminalsPlated steel case, copper contactsHex nuts and washers includedBracket mounting holes 5/16" x 19/32", 2-13/64" on centersUL and CE approved
Bep 1002205 Pvc Coated Continuous Duty Solenoid, 85A - 1002205 - 969-1002205F1
Remotely switch high amperage loads with a low amperage on-off switch. Intermittent rating 100A: 10 secondsCopper #10-32 thread signal terminalsCopper 5/16"-24 thread contact terminalsPVC coated steel caseBracket mounting holes 5/16" x 19/32", 2 13/64" on centersUL and CE approved
Bep 1002206 Intermittent Duty Solenoid - 1002206 - 969-1002206F1
Intermittent switching of high amperage loads with a low amperage on-off switch. Rated at 750A make/100A break, this solenoid is for intermittent use only: 10 seconds ON, 20 minutes OFF (ideal for engine cranking)Signal voltage of 12V DC and contact voltage of 6-12V DC#10/32 thread signal terminalsCopper 5/16"-24 thread contact terminalsBracket mounting holes 5/16" x 19/32", 2 13/64" on center
Bep 1002301 Dual Warning Light & Buzzer - 1002301 - 969-1002301F1
Adds alarm functionality to your dash or panel Buzzer sounds and bright red light illuminates when voltage is presentFor use with temperature, oil pressure, and engine warning alarm kits12V DC, #8-32 screw terminals, red LEDReplaces Cole Hersee 4112-RCBP
Bep 701Mdvs Dual Operation Vss (Voltage Sensitive Switch) 275A Cont Motorized - 701-Mdvs - 969-701Mdvsf1
These Voltage Sensitive Switches (VSS) automatically sense connected battery bank voltages and provide optimal, efficient charging of the second bank. The VSS allows for independent battery banks to be combined or isolated based on the presence of a charging source (such as an engine alternator or battery charger), while also offering remotely activated, high current, emergency parallel connection. Designed and constructed for longevity in the marine environment with tinned copper conductors, stainless steel nuts, and high temperature, fibre reinforced plastics. The units are ignition protected, provide On/Off switching operation, and may be recessed or surface mounted. The remote emergency parallel function can be operated through a momentary button on the dash which will parallel the batteries for 10 minutes. Once this 10 minutes has passed, if the voltage is high enough, the voltage sensitive switch will stay engaged. If not, it will disengage.
Bep 701Pm Contour Panel Mounted Manual Battery Master Switch - 701-Pm - 969-701Pmf1
2 POSITION - ON/OFFThe 701 offers a contour lock system, allowing it to be a stand alone unit or locked together with other switches. It also features a control knob which cannot be removed while in the ON or OFF position, however can be removed by switching to an anti-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications. A removable rear cover insulates the terminals against any short circuits and ensures the switch meets ABYC requirements. Can be either surface or recess mounted by cutting a 2-1/16" hole. Tin plated copper studs & nuts. Rated for 275 amps continuous, 455 intermittent, 1250 amps cranking. Compact, lightweightRemovable keyCountersunk recesses for surface mount applicationStandard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictionsStandard interchange label systemMolded in high temperature, fiber reinforced plastics
Bep 772Dbc Pro Installer Dual Bank Control Battery Switch (1,1/2, Parallel, Off) - 772-Dbc - 969-772Dbcf1
A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment.
Bep 777Bb3S650 Heavy-Duty Busbar - 777-Bb3S-650 - 969-777Bb3S650F1
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as required, while the label recess provides the perfect landing for handheld-printer labels. It's easy linking to other Pro Installer products because of the common interconnection height, and the radiused busbar ends improve cable routing options for large cables.
Bep 777Bb4S500 Heavy-Duty Busbar - 777-Bb4S-500 - 969-777Bb4S500F1
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as required, while the label recess provides the perfect landing for handheld-printer labels. It's easy linking to other Pro Installer products because of the common interconnection height, and the radiused busbar ends improve cable routing options for large cables.
Bep 777Bb5S650 Heavy-Duty Busbar - 777-Bb5S-650 - 969-777Bb5S650F1
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as required, while the label recess provides the perfect landing for handheld-printer labels. It's easy linking to other Pro Installer products because of the common interconnection height, and the radiused busbar ends improve cable routing options for large cables.
Bep 777Bb8S650 Heavy-Duty Busbar - 777-Bb8S-650 - 969-777Bb8S650F1
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as required, while the label recess provides the perfect landing for handheld-printer labels. It's easy linking to other Pro Installer products because of the common interconnection height, and the radiused busbar ends improve cable routing options for large cables.
Bep 777Z10W200 Z Busbar - 777-Z10W-200 - 969-777Z10W200F1
This patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link, or used as separate positive/negative bars.
Bep 777Z18W200 Z Busbar - 777-Z18W-200 - 969-777Z18W200F1
This patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link, or used as separate positive/negative bars.
Bep 779Lbbss Pro Installer Battery Switch Link Bar Set - 779-Lb-Bss - 969-779Lbbssf1
Used to connect various BEP products to create systems. High purity copper, tin platedFastest, most economic way of connecting productsSaves space, allows clustering for the most compact installations779LBBSS Includes 1ea 779LB1, 3ea 779LB2
Bep 779Lbj2 Pro Installer Link Bar, 1Ea. - 779-Lbj-2 - 969-779Lbj2F1
Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity tin plated copper for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
Bep 779Lbj3 Pro Installer Link Bar, 1Ea. - 779-Lbj-3 - 969-779Lbj3F1
Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity tin plated copper for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
Bep 80716003000 Smart Battery Hub, Twin Engine Model - 80-716-0030-00 - 969-80716003000F1
Smart Battery Hub is a complete all in one battery management system for vessels running 2 - 6 outboards. Simplifies battery management with remotely activated switches, automatic dual direction Voltage Sensitive Switching (VSS) and emergency parallel functionality, housed in a robust, easy-to-install, ignition-protected IPX7 enclosure. Twin or Triple engine configurationsRemotely operated switches via analog inputs or CZone®Configurable dual direction voltage sensitive switchesMonitors and transmits all battery voltages, including house bank state of charge over NMEA2000 for integration with multi-function displays2 x additional sensor inputsFull mechanical override of all switches for safety and servicingParallel two units together for 4, 5 or 6 engine installationsFor 12 or 24 volt systems
Bep 80716003100 Smart Battery Hub, Triple Engine Model - 80-716-0031-00 - 969-80716003100F1
Smart Battery Hub is a complete all in one battery management system for vessels running 2 - 6 outboards. Simplifies battery management with remotely activated switches, automatic dual direction Voltage Sensitive Switching (VSS) and emergency parallel functionality, housed in a robust, easy-to-install, ignition-protected IPX7 enclosure. Twin or Triple engine configurationsRemotely operated switches via analog inputs or CZone®Configurable dual direction voltage sensitive switchesMonitors and transmits all battery voltages, including house bank state of charge over NMEA2000 for integration with multi-function displays2 x additional sensor inputsFull mechanical override of all switches for safety and servicingParallel two units together for 4, 5 or 6 engine installationsFor 12 or 24 volt systems
Bep 969-1001503 Momentary Push Botton Switch, Off/(On) - 1001503 - 969-1001503F1
Suitable for 6-36V system configurations Momentary actuation ideal for use with hornsOptional weather proof rubber caps available with threaded or press-on installationReplaces Cole Hersee #: M-485
Bep Cbs30Dp Ieg Magnetic Circuit Breaker, 30 Amps - Cbs-30A-Dp - 69-Cbs30Dpf1
IEG magnetic circuit breakers provide reliable circuit protection and accurate circuit control for equipment in the international market place. Designed using the latest in sensitive hydraulic magnetic technology, the IEG line adapts itself to many applications and environments. They are ideal for marine applications, data processing and business machines, as well as medical instrumentation, broadcast equipment, vending and amusement machines, military applications and wherever precision operation is required. Temperature differences which affect fuses and other thermal devices are not a concern. One important feature of this breaker line is a 'trip free' action, which means the circuit will trip in the presence of an overload even though the handle is held in the ON position. The delay mechanism senses the fault and the contacts open. Spacing compliance: IEC specification 601, 950; VDE 0804, 0805UL recognized; CSA certified; VDE 0660 approved; Part 101 and CE compliantAvailable in single or double pole; triple pole available on special ordersPlease Note: Part numbers shown are all BEP specific and have no reference to the Airpax part number system
Bep Contour Surface Or Recessed Manual Battery Master Switch - 701 - 969-701F1
2 POSITION - ON/OFFPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.The 701 offers a contour lock system, allowing it to be a stand alone unit or locked together with other switches. It also features a control knob which cannot be removed while in the ON or OFF position, however can be removed by switching to an anti-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications. A rear cover insulates the terminals against any short circuits and ensures the switch meets ABYC requirements. Tin plated copper studs & nuts. Rated for 275 amps continuous, 455 intermittent, 1250 amps cranking. Compact, lightweightRemovable keyCountersunk recesses for surface mount applicationStandard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictionsStandard interchange label systemMolded in high temperature, fiber reinforced plastics
Bep Isc10R Insulated Stud Cover, Black Negative 10 Mm - Isc-10R - 969-Isc10Rf1
Marinco Insulated Stud Cover, Black Negative 10 mm.
Bep Ist10Mm1S Insulated Stud - Single 10Mm - Ist-10Mm-1S - 969-Ist10Mm1Sf1
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables.
Bep Ist10Mm1Spt Insulated Stud - Single 8Mm With Power Tapping Plate - Ist-10Mm-1Spt - 969-Ist10Mm1Sptf1
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables.
Bep Ist10Mm2S Insulated Stud - Double 10Mm - Ist-10Mm-2S - 969-Ist10Mm2Sf1
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables.
Bep Ist10Mm8Mm Insulated Double Stud - Ist-10Mm-8Mm - 969-Ist10Mm8Mmf1
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables.
Bep Ist8Mm1S Insulated Stud - Single 8Mm - Ist-8Mm-1S - 969-Ist8Mm1Sf1
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables.
