Sea-Dog Line
Louvered Vent White - 337210-1 - 354-3372101F1
These Louvered Ventilators are constructed of impact resistant injection molded ABS and are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Interchangeable with Attwood® vent #1494. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. Dimensions: 2-5/8" x 17-1/2" L x 2-5/8" H x 7/16" D
Louvered Vent Black - 337211-1 - 354-3372111F1
These Louvered Ventilators are constructed of impact resistant injection molded ABS and are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Interchangeable with Attwood® vent #1494. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. Dimensions: 2-5/8" x 17-1/2" L x 2-5/8" H x 7/16" D
Locker Vents - 331620-1 - 354-3316201F1
Stamped 304 stainless steel. Carded.
Light Bulb, #94, 2/Card - 441094-1 - 354-4410941F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #93, 2/Card - 441093-1 - 354-4410931F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #90, 2/Card - 441090-1 - 354-4410901F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #67, 2/Card - 441067-1 - 354-4410671F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #57, 2/Card - 441057-1 - 354-4410571F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #53, 2/Card - 441053-1 - 354-4410531F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1157, 2/Card - 441157-1 - 354-4411571F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1156, 2/Card - 441156-1 - 354-4411561F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1142R - 441143-1 - 354-4411431F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1142 - 441142-1 - 354-4411421F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1141, 2/Card - 441141-1 - 354-4411411F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1076, 2/Card - 441076-1 - 354-4410761F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1034, 2/Card - 441034-1 - 354-4410341F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1032, 2/Card - 441032-1 - 354-4410321F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb, #1003, 2/Card - 441003-1 - 354-4410031F1
General purpose incandescent Bayonet Base Light Bulbs feature nickel plated brass bases for corrosion resistance and positive contact. Heavy duty glass bulb housing and filament for break resistance and longevity. 12.8VDC.
Light Bulb #906 Wedge Base 1 - 441906-1 - 354-4419061F1
Similar to a bi-pin connector, a Wedge Base Light Bulb uses two wires that extend into the bulb and are bent up onto the sides of the base where they make contact with the socket. Compression force holds the bulb in the socket to prevent it from loosening from vibration. Ideal for inside or under cabinets and shelves. 12.8VDC.
Light Bulb #71 Festoon 12V 2Cd - 441071-1 - 354-4410711F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Light Bulb - 441854-1 - 354-4418541F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Lift Handle, Sm. - 221815-1 - 354-2218151F1
Constructed of corrosion resistant 304 stamped stainless steel. These ring pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Spring loaded handle prevents rattling and stays flush against the base, even in vertical applications. Installs with four FH fasteners (not included).
Lift Handle Lg. Stainless - 221810-1 - 354-2218101F1
Constructed of corrosion resistant 304 stamped stainless steel. These ring pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Spring loaded handle prevents rattling and stays flush against the base, even in vertical applications. Installs with four FH fasteners (not included).
Lift Handle - 224260-1 - 354-2242601F1
Chrome-plated zinc. Pre-drilled for (4) #10 fasteners. Carded.
Lift Handle - 222350-1 - 354-2223501F1
Sand cast chrome plated brass. Use #8 FH fasteners.
Lift Handle - 222340-1 - 354-2223401F1
Chrome-plated cast brass. #10 FH fastener. Carded.
Life Jacket Whistle, Carded - 571260-1 - 354-5712601F1
Duo-tone Sea-Dog® Whistle has no moving parts or balls that jam or corrode. Meets USCG requirements for use on PFDs. Handy clip secures whistle until needed. Injected molded polypropylene construction. Includes a 36" lanyard.
Life Jacket Whistle, Bulk - 571260 - 354-571260F1
Duo-tone Sea-Dog® Whistle has no moving parts or balls that jam or corrode. Meets USCG requirements for use on PFDs. Handy clip secures whistle until needed. Injected molded polypropylene construction.
Life Jacket Whistle, 40 Piece Display - 571260-5 - 354-5712605F1
Duo-tone Sea-Dog® Whistle has no moving parts or balls that jam or corrode. Meets USCG requirements for use on PFDs. Handy clip secures whistle until needed. Injected molded polypropylene construction.
Lg Deck Hinge/Angled White 2/Cd - 273231-1 - 354-2732311F1
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings install with two #10 FH fasteners (not included). 3/16" pin size.
Lg Deck Hinge White 2/Cd - 273201-1 - 354-2732011F1
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings install with two #10 FH fasteners (not included). 3/16" pin size.
Lenses For 400180 Red & Green 1Pr/Cd - 400181-1 - 354-4001811F1
Red & green replacement lenses.
Led Utility Light - 401325-1 - 354-4013251F1
These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw blue LED bulbs. Surface mounts with four #6 FH fasteners (not included).
Led Utility Light - 401324-1 - 354-4013241F1
These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw blue LED bulbs. Surface mounts with four #6 FH fasteners (not included).
Led Utility Light - 401321-1 - 354-4013211F1
These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw white LED bulbs. Surface mounts with four #6 FH fasteners (not included).
Led Utility Light - 401320-1 - 354-4013201F1
These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw white LED bulbs. Surface mounts with four #6 FH fasteners (not included).
Led Under Cabin Light 6-1/2 Warm White/3000K 180Lm - 400600-3 - 354-4006003F1
Led Under Cabin Light 22-1/2 Warm White/3000K 900Lm - 400604-3 - 354-4006043F1
Led Under Cabin Light 14-1/2 Warm White/3000K 540Lm - 400603-3 - 354-4006033F1
Led Switch Activated Cabinet Light - 227162-1 - 354-2271621F1
Cabinet light has 4 super bright LED's and its small size allows it to be mounted (stainless steel mounting screws included) in any cabinet, locker, or other places where short access lighting is needed. The light is battery powered and uses 6 LR44 batteries (included), so no wiring is necessary. Injection molded nylon.
Led Fold Down All Around Pontoon Light, 9" - 400023-1 - 354-4000231F1
LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Led Fold Down All Around Pontoon Light, 24" - 400026-1 - 354-4000261F1
LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Led Flush Mount Combo Drink Holder W/Drain Fitting - 588074-1 - 354-5880741F1
Features three LEDSs for night visiion. Allows the use of beverage cans with or without insulated wraps, as well as most standard size bottles. Drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Constructed of corrosion resistant stamped 304 stainless. 12VDC.
Led Flush Mount Combo Drink Holder W/Drain Fitting - 588071-1 - 354-5880711F1
Features three LEDSs for night visiion. Allows the use of beverage cans with or without insulated wraps, as well as most standard size bottles. Drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Constructed of corrosion resistant stamped 304 stainless. 12VDC.
Led Day/Night Dome Light, Chrome - 401755-1 - 354-4017551F1
LED Day/Night Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off/on rocker switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with #8 RH fasteners (not included).
Led Courtesy Button Light - 360°, White Light - 401370-1 - 354-4013701F1
Stamped 304 stainless steel and plastic. Utilizes one bright white LED that draws very low amperage and has very long life.
Led (Cree) Docking Lights - 405951-1 - 354-4059511F1
Constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating.
Large Replacement Hook - 491052-1 - 354-4910521F1
Replacement boat hook end.
Knob Maneuvering Cast Ss - 230106-1 - 354-2301061F1
A steering knob attaches to the wheel for use in situations where maneuvering is excessive. It allows the driver to turn the steering wheel more quickly. Constructed of investment cast stainless steel for corrosion resistance this knob is designed for use with 1" x 3/4" oval tubing.
Knife & Pliers Holder - 325925-1 - 354-3259251F1
This Knife & Pliers Holder is great for storing knives, pliers, and fishing lures. Constructed of injection molded polypropylene it installs with two #8 FH fasteners (included).
Kill Switch Replacement Lanyard - 420489-1 - 354-4204891F1
Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill. WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.
Jaw Slide, Hinged 7/8" Black, Each - 273162-1 - 354-2731621F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Internal Square Eye End, 7/8" X 7/8" Stainless, Each - 270191-1 - 354-2701911F1
Corrosion resistant investment cast 316 stainless steel construction. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. For use as an insert for 1-1/4" square tubing (1" x 1" inside dimensions). 1/4" Pin size.
Internal Eye End, 7/8" White, Pair - 273181-1 - 354-2731811F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 7/8" Black, Pair - 273180-1 - 354-2731801F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 7/8 Stainless, Each - 270180-1 - 354-2701801F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 3/4" White, Pair - 273176-1 - 354-2731761F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 3/4" Black, Pair - 273175-1 - 354-2731751F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 3/4 Stainless, Each - 270175-1 - 354-2701751F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Inside Eye End Bracket, White - 273370-1 - 354-2733701F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
Inside Eye End Bracket, Black - 273369-1 - 354-2733691F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
Inline Fuse Holder (Waterproof - 420555-1 - 354-4205551F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder (Waterproof - 420554-1 - 354-4205541F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder (Waterproof - 420553-1 - 354-4205531F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder (Waterproof - 420552-1 - 354-4205521F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder - 445199-1 - 354-4451991F1
ATO/ATC Inline Fuse Holder is constructed of injection molded, fiberglass reinforced nylon. Designed to accept ATO/ATC automotive-style spade terminal fuses. Maximum: 30A. 14 gauge 4" AWG wire lead. Fuse not included. Use with fuses (445101-445130).
Inline Fuse - 420500-1 - 354-4205001F1
AGC Inline Fuse Holder is constructed with Injection molded nylon. Overcurrent protection in a convenient push together inline holder. To install, cut a 11-1/2" wire lead from 14 gauge wire and strip both ends. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 20A @ 12VDC. 20A AGC fuse included.
Inline 50 Amp Fuse Holder - 420557-1 - 354-4205571F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline 30 Amp Fuse Holder - 420565-1 - 354-4205651F1
ACG Watertight Inline Dual Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse and an extra emergency fuse. Fuse holder has a specially designed case that is molded with a second fuse pocket for convenient access to a spare fuse.
Iluminated Rocker - 420443-1 - 354-4204431F1
Rocker Switch is constructed of durable, weather resistant injection molded nylon and polycarbonate housing. Snap-in panel mount fits 1/2" x 1-1/8" switch cut-out. Wires easily with three stamped brass 1/4" blade terminals. 15A @ 12VDC.
Hose Vent Elbow, 3" - 337350 - 354-337350F1
Hose Vent Elbows are constructed of impact resistant injection molded ABS. For use with 3" hose vents to create a 90° bend. Installation hole pattern matches Flush Thru Vents 337316, 337326, & 337590.
Hose Deck Fill Replacement Cap - 351390-1 - 354-3513901F1
Cast 316 stainless steel.
Horn Button(Miniture)-Red - 420415-1 - 354-4204151F1
This Horn Button is a panel mounted, push button, momentary On-Off switch for operating fog horns, sirens etc. Mounts in 1/2" diameter hole and is wired with 1/4" QD terminals. Nylon/phenolic and chrome-plated brass construction. This horn switch comes with either a standard black button or bright red button to make it easily identifiable in emergency situations. Maximum panel thickness: 5/16". 15A @ 12VDC.
Horn Button-1/2" Dia.Hole Black - 420416-1 - 354-4204161F1
This Horn Button is a panel mounted, push button, momentary On-Off switch for operating fog horns, sirens etc. Mounts in 1/2" diameter hole and is wired with 1/4" QD terminals. Nylon/phenolic and chrome-plated brass construction. This horn switch comes with either a standard black button or bright red button to make it easily identifiable in emergency situations. Maximum panel thickness: 5/16". 15A @ 12VDC.
Horn Button - 420429-1 - 354-4204291F1
This momentary Horn Button is constructed of chrome plated brass. For operating fog horns, sirens etc. Activates signaling devise in emergency situations or to communicate with locks and bridges. Surface mounts with two #10 RH fasteners (not included). 12A @ 12VDC.
Hitch Pin & Clip 5/8" - 751062-1 - 354-7510621F1
The Receiver Pin with Clip ensures your ball mount or other hitch mounted accessories stay securely engaged to your trailer hitch. Hitch pin clip included. Corrosion resistant zinc plated steel construction.
Hinge-Butt Stainl.1-1/2" X1-1/ - 201580-1 - 354-2015801F1
Corrosion resistant stamped 304 stainless steel, consist of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Installs with four #8 FH fasteners (not included).
Hinge Separating - Left 1Pr/Cd - 204278-1 - 354-2042781F1
Alows a door or lid to be removed after installation without having to remove the fasteners. Surface mounted, these chrome plated forged brass hinges can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
