Sea-Dog Line
Sea-Dog 2850651 60° Center (Port) Stanchion, Stainless, 7/8" Tubing - 285065-1 - 354-2850651F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2850661 60° Center (Starboard) Stanchion, Stainless, 7/8" Tubing - 285066-1 - 354-2850661F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2851601 60° End Stanchion, Stainless, 7/8" Tubing - 285160-1 - 354-2851601F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2851611 60° End Rail Fitting, Stainless, 1" Tubing - 285161-1 - 354-2851611F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 285165 60° End (Port) Stanchion, Stainless, 7/8" Tubing - 285165-1 - 354-2851651F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 285166 60° End (Starboard) Stanchion, Stainless, 7/8" Tubing - 285166-1 - 354-2851661F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2882901 Bullet End, Stainless, 7/8" Tubing - 288290-1 - 354-2882901F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 288291 Bullet End, Stainless, 1" Tubing - 288291 - 354-288291F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2891551 5-1/2 Rail End, Female, Stainless, 7/8" Tubing" - 289155-1 - 354-2891551F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2891651 16-1/2 Rail End, Male, Stainless, 7/8" Tubing" - 289165-1 - 354-2891651F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2991081 Snap Cap & Socket, Nickel Plated Brass, 6 Sets - 299108-1 - 354-2991081F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991091 Snap Cap & Socket, Nickel Plated Brass, 6 Sets - 299109-1 - 354-2991091F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991101 Eyelet Snap Stud, Nickel Plated Brass, 6 Sets - 299110-1 - 354-2991101F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991111 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299111-1 - 354-2991111F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991121 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299112-1 - 354-2991121F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991131 Screw Snap Stud (#10 Screw), Nickel Plated Brass, 6 Sets - 299113-1 - 354-2991131F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991141 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299114-1 - 354-2991141F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991151 Canvas Snap Stud (#10-32 Mach. Screw), Nickel Plated Brass, 5 Sets - 299115-1 - 354-2991151F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991161 Snap Turn Buckle - 2 Screw Base, Nickel Plated Brass, 2 Sets - 299116-1 - 354-2991161F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991171 Snap Turn Buckle - 2 Prong Clinch & Back Plate, Nickel Plated Brass, 2 Sets - 299117-1 - 354-2991171F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991181 Snap Turn Buckle Eyelet & Washer, Nickel Plated Brass, 2 Sets - 299118-1 - 354-2991181F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991191 Snap Turn Buckle - #7 Brass Wood Screw, Nickel Plated Brass, 2 Sets - 299119-1 - 354-2991191F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 3-Position Two Circuit Switch - 420400-1 - 354-4204001F1
Stamped brass. When pushed in all the way, the switch is turned off. When pulled to the first stop, the first circuit is activated. At the second stop the first circuit is deactivated and the second circuit is activated. 15 amps. 3/8" x 1" Shaft.
Sea-Dog 3-Sided Bristle Brush, Medium, Yellow - 491080-1 - 354-4910801F1
These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. The medium bristles (yellow) are a good overall brush for textured and non-skid surfaces. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.
Sea-Dog 3-Sided Bristle Brush, Soft, Blue - 491070-1 - 354-4910701F1
These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Soft bristles (blue) are scratch resistant for gelcoat, paint, and plastic windows. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.
Sea-Dog 3-Sided Bristle Brush, Stiff, White - 491090-1 - 354-4910901F1
These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Stiff bristles (white) are effective for jobs below the waterline, teak, and other tough cleaning jobs. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.
Sea-Dog 318001 Folding Grapnel Anchor 1.5 Lbs., A:1/4" , B:7", C:2-1/4", Boat Length:5'-10', Line/Length: 1/4"/35' , Chain/Length: 3/16"/7'-10" - 318001 - 354-318001F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions.
Sea-Dog 318003 Folding Grapnel Anchorr 3.5 Lbs, A:1/2" , B:12", C:2-7/8", Boat Length: 5'-12', Line/Length: 1/4"/35' , Chain/Length: 3/16"/7'-10" - 318003 - 354-318003F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions.
Sea-Dog 318013 Folding Grapnel Anchor 13 Lbs, A:1/2" , B:21:1/2, C:4-3/4", Boat Length:14'-22', Line/Length: 3/8"/150', Chain Length: 3/16"/10'-20' - 318013 - 354-318013F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Sea-Dog 318022 Folding Grapnel Anchor, 22 Lbs. A:1/2" , B:24-1/4", C:5", Boat Length: 22'-30', Line/Length: 3/8"150', Chain Length: 1/4"/10'-20' - 318022 - 354-318022F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Sea-Dog 321422 Gas Filled Lift Spring - 321422-1 - 354-3214221F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321424 Gas Filled Lift Spring - 321424-1 - 354-3214241F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214621 Gas Filled Lift Spring - 321462-1 - 354-3214621F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214631 Gas Filled Lift Spring - 321463-1 - 354-3214631F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214661 Gas Filled Lift Spring - 321466-1 - 354-3214661F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214731 Gas Filled Lift Spring - 321473-1 - 354-3214731F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214741 Gas Filled Lift Spring - 321474-1 - 354-3214741F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321476 Gas Filled Lift Spring - 321476-1 - 354-3214761F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321482 Gas Filled Lift Spring - 321482-1 - 354-3214821F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214831 Gas Filled Lift Spring - 321483-1 - 354-3214831F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214841 Gas Filled Lift Spring - 321484-1 - 354-3214841F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214861 Gas Filled Lift Spring - 321486-1 - 354-3214861F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321488 Gas Filled Lift Spring - 321488-1 - 354-3214881F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321492 Gas Filled Lift Spring - 321492-1 - 354-3214921F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3215811 90° Gas Lift Mount-Narrow - 321581-1 - 354-3215811F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215821 90° Gas Lift Mount-Mount-Wide - 321582-1 - 354-3215821F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215831 Flush Gas Lift - 321583-1 - 354-3215831F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 321586 Gas Lift Ball Stud - 10Mm - 321586 - 354-321586F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215861 Gas Lift Ball Stud-10Mm - 321586-1 - 354-3215861F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215991 Gas Lift Rod End Fitting - 321599-1 - 354-3215991F1
Unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings. Self-cleaning orifice.
Sea-Dog 3216501 Hatch Spring - 321650-1 - 354-3216501F1
The Sea-Dog Stainless Steel Hatch Spring has an internal wire that prevents the spring from being overextended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and overextend.
Sea-Dog 3216601 Hatch Spring - 321660-1 - 354-3216601F1
Formed 304 Stainless Steel.
Sea-Dog 321805 Stainless Steel Hinged Chain Deck Pipe - 321805 - 354-321805F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Sea-Dog 321850 Chain Gripper Plate - 321850-1 - 354-3218501F1
Stabilizes anchor chain and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Sea-Dog® Bow Shackles (147212) for connecting lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16" and 1/2".
Sea-Dog 3222701 Ladder Locks, Chrome - 322270-1 - 354-3222701F1
Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Installs with eight #10 FH fasteners (not included). Highly polished chrome.
Sea-Dog 325041 Pvc Clips For Track Rod Holder - 325041 - 354-325041F1
Designed to hold fishing rods in the toughest conditions. Track sold separately
Sea-Dog 3250651 Narrow Gunnel Rod Holder W/Stainless Top - 325065-1 - 354-3250651F1
This Narrow Gunnel Flush Mount Rod Holder with Stainless Top is designed for narrow gunnel applications. Accommodates rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV resistant injection molded ABS with highly polished investment cast 316 stainless top. Installs with three #10 FH fasteners (not included).
Sea-Dog 325168 Flush Mount Rod Holder W/Stainless Top - 325168-1 - 354-3251681F1
Constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Sea-Dog 3256241 4-Rod Storage Rack - 325624-1 - 354-3256241F1
Constructed of extremely durable, high-strength UV resistant polypropylene. For horizontal and overhead installation. Rods are secured with bungee cord attachment. Installs with twelve #8 FH fasteners (included).
Sea-Dog 3265203 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2", Medium, 3/4"-1-1/4" - 326520-3 - 354-3265203F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265253 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2-3/8", Large, 3/4"-1-1/4" - 326525-3 - 354-3265253F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265303 Fillet & Prep Table Square Rail Mount, A:20", B:12-5/8", C 13-1/2", D:2", Medium, Fits Tubing: 1"-1-1/4" - 326530-3 - 354-3265303F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265353 Fillet & Prep Table Square Rail Mount, A:30", B:12-5/8", C:13-1/2", D:2-3/8", Large, Fits Tubing: 1"-1-1/4" - 326535-3 - 354-3265353F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265803 Fillet Table, 20" W X 12-5/8" D, Table Only - 326580-3 - 354-3265803F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high-density polypropylene constructionEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not includedDoes Not Include Mounting Hardware
Sea-Dog 3271001 Rail Mount Brackets W/Screws, Black, 1 Pr. - 327100-1 - 354-3271001F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 327101 Rail Mount Brackets W/Oval Plates, Black, 1 Pr. - 327101-1 - 354-3271011F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 327105 Rail Mount Brackets W/Screws, White, 1 Pr. - 327105-1 - 354-3271051F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 3271111 Rail Mount Cleat - 327111-1 - 354-3271111F1
Includes a Heavy Duty Black Nylon Cleat. Ideal for easy attachment of fender, flag halyards, canvas tie downs and related accessories.
Sea-Dog 3271121 Rail Mount Fairlead With Stainless Insert - 327112-1 - 354-3271121F1
Includes a nylon fair lead with stainless insert. Allows easy routing of roller furling lines. The stainless insert allows use of wire lines if necessary. Fits 7/8" - 1" railing.
Sea-Dog 327135 Rail Mount Horseshoe Buoy Bracket - 327135-1 - 354-3271351F1
Can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware to mount on tubing. Made from marine grade stamped aluminum and powder coated for a long lasting finish.
Sea-Dog 327150 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150 - 354-327150F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 3271501 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150-1 - 354-3271501F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. The two-piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc.
Sea-Dog 327151 Rail Mount Motor Bracket,, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", Black - 327151 - 354-327151F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 3271901 Rail Mount Bracket - Round, For 7/8" - 1" Rail, Black, 2/Pk - 327190-1 - 354-3271901F1
Injection Molded Nylon/Stainless Steel Screws.
Sea-Dog 3271911 Rail Mount Bracket - Round, For 1-1/8" - 1-1/4" Rail, Black - 327191-1 - 354-3271911F1
Injection Molded Nylon/Stainless Steel Screws.
Sea-Dog 3272001 Fender Mate, 1 Pr. - 327200-1 - 354-3272001F1
Fendermate is the latest in fender brackets constructed of marine grade, reinforced injection molded nylon. Clamps securely on both 7/8" and 1" round tubing and 3/16" and 1/4" life line wire. Unique double locking action locks the clamp on the rail or wire while still allowing full adjustment of the height of the fender. When the proper height is reached, the final locking action clamps the rope quickly and securely.
Sea-Dog 328050 Short Bow Roller - 328050 - 354-328050F1
Investment Cast 316 Stainless Steel body & wheel.
Sea-Dog 328160 Hawse Pipe - 328160-1 - 354-3281601F1
Designed to protect the boats hull against damage from anchor line and chain while also reducing rope chafe. Investment cast 316 stainless steel construction for corrosion resistance and durability. Installs with four fasteners (not included).
Sea-Dog 3281901 Flag Clips For 1/2" Dia Pole, Pr. - 328190-1 - 354-3281901F1
Flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips
Sea-Dog 3281951 Stainless Flag Pole Hole Mount Pennant Clips, 4/Set - 328195-1 - 354-3281951F1
Stainless spring wire quick release clips are designed to hold their shape after continued use.
Sea-Dog 3281971 Nylon Flagpole Pennant Mounts & Stainless Clips, 4/Set - 328197-1 - 354-3281971F1
Nylon adjustable flag pole mount clip used in conjunction with stainless steel spring wire quick release clip can be positioned and repositioned on a flag pole allowing mounting flexibility for a variety of flag or pennant sizes. Stainless spring clips are designed to hold their shape after continued use.
Sea-Dog 329235 Heavy Duty Adjustable Antenna Base - 329235-1 - 354-3292351F1
Investment Cast 316 Stainless Steel. For use with over-height whips or where extra strength and rigidity are required. Dual swiveling mounts allow for complete adjustability. Accepts any standard antenna with 1"- 14 threads.
Sea-Dog 3295151 Fixed Antenna Base, A: 4-1/4", B: 3", C: 2-1/4", 1/4" Rh - 329515-1 - 354-3295151F1
Flange mount fixed antenna bracket. Formed 304 stainless steel construction. Designed to allow wire to feed directly through the base eliminating the need for a separate cable grommet. Ideal for TV, Loran, GPS and VHF antenna's with standard 1"-14 threads. Installs with three ¼" RH fasteners (not included).
Sea-Dog 3295171 Fixed Antenna Base, A: 1-1/2", B:3", C: 2-1/4", 1/4" Rh - 329517-1 - 354-3295171F1
Flange mount fixed antenna bracket. Formed 304 stainless steel construction. Designed to allow wire to feed directly through the base eliminating the need for a separate cable grommet. Ideal for TV, Loran, GPS and VHF antenna's with standard 1"-14 threads. Installs with three ¼" RH fasteners (not included).
Sea-Dog 3298021 5' Coaxial Cable Assembly - 329802-1 - 354-3298021F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298041 Coaxial Cable Assembly, A:10", B: 2", C:1-3/4", D:11/16", - 329804-1 - 354-3298041F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298061 20' Coaxial Cable Assembly - 329806-1 - 354-3298061F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 329808 50' Coaxial Cable Assembly - 329808-1 - 354-3298081F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3299001 Pl-259 Male Uhf Coax Connector - 329900-1 - 354-3299001F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299011 Pl-259/Ug175U Male Uhf Coax Connector - 329901-1 - 354-3299011F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299021 Pl-259/Ug176U Male Uhf Coax Connector - 329902-1 - 354-3299021F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 329905 Ug175U Uhf Coax Adapter - 329905-1 - 354-3299051F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 329906 Ug176U Uhf Coax Adapter - 329906-1 - 354-3299061F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299501 Pl-258 Double Female In-Line Uhf Coax Connector - 329950-1 - 354-3299501F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299511 Double Female Bulkhead Uhf Coax Connector - 329951-1 - 354-3299511F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299551 Right Angle Uhf Coax Connector - 329955-1 - 354-3299551F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299701 Cap & Chain For Uhf Coax Connector - 329970-1 - 354-3299701F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 331200 Stainless Louvered Vent - 331200 - 354-331200F1
Corrosion resistant 316 stainless steel vents are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs w/six #6 RH fasteners (not included).
Sea-Dog 331201 Stainless Recessed Louvered Vent - 331201 - 354-331201F1
Corrosion resistant 316 stainless steel. Use with a collector box to facilitate air intake and exhaust. Designed with recessed louvers to create a flush vent surface area reducing possible damage to the vent as well as preventing chafing to mooring lines, fishing lines, etc.
Sea-Dog 331202 Collector Box - 331202 - 354-331202F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331202 is available without holes to allow for custom installations.
