Cole Hersee
(On)-Off-(On) Toggle Dpdt - 55054-Bp - 12-55054Bpf1
12-36V DC (25A at 12V). Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
12V Motor Reversing Solenoid - 24450-Bx - 12-24450Bxf1
DPDT intermittent duty. Common ground coil. Two blade coil terminals, 5/16" -24 large studs. Copper contacts. F bracket. 75A make and break, maximum On time 5 mins. 125A make and break, maximum On time 0.5 sec. Allow 5 mins. Off after max. On time. Max. operating voltage 14.5V DC. Cycle life 10,000 cycles at 5 sec. On, 25 sec. Off. Shipped w/ mounting hardware.
12V Solenoid Insulated - 24047-Bx - 12-24047Bxf1
Intermittent duty solenoid. Insulated, with plated steel housing. Normally Open contacts, one circuit: Off/On. 750A make, 100A break, 10sec on 20 min off.
12V Universal Dc Buer - 4099-Bp - 12-4099Bpf1
Can be triggered by any switch, such as air or oil pressure, or temperature. Rugged ABS resin case.
2 Pos Starter/Ignition Switch - M-489-Bp - 12-M489Bpf1
Two positions: off/on(ignition). Two screw terminals, brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/16"-24 in diameter, 1-7/32" long. Rating at 12V: 10 amps.
20 Gang Terminal Block-Common - M-448-Bx - 12-M448Bxf1
Solid brass busbar safely carries up to 150A. Two 1/4" -20 diameter brass stud with hex nuts. 8-32 round head screws for attaching wires. Moisture repellent thermoplastic insulator base. 2 mounting holes. Safely carries up to 150 amps.
4 Pole Rubberized Connector - M-115-Bp - 12-M115Bpf1
Durable rubber caps that protect connections against moisture and dirt. Corrosion resistant construction. Moisture repellent insulation. Brass contacts are polarized to assure proper mating of circuits.
4 Pos Ign Switch W/O O-Ring - M-712-Bp - 12-M712Bpf1
4 Positions: Acc - Off - Ign/Acc - Ign/Start.Brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/16" - 24 x 1-7/32". Fits panels up through 1" thick. 4 brass screw terminals. Rating at 12V: 5A ignition, 5A start, 10A accessory.
Black Weather Resistant Cap For Pushbutton Switch - 83280-03-Bp - 12-8328003Bpf1
A durable resilient rubber cap embossed with "PUSH". Cap is permanently fastened to mounting nut. Fits all Cole Hersee momentary push button switches with 5/8"-32 diameter threaded mounting stem and other momentary switches with similar design.
Caps/Replacement Rubber Caps - 407-03-Bp - 12-40703Bpf1
Moisture repellent with embossed "PUSH". Snaps over special face nut M83261. Use on Cole Hersee switches M524, M608 and M626.
Circuit Breaker - 20 Amps - 30055-20-Bp - 12-3005520Bpf1
Internal mounting bracket. Overall size 2" x 25/32" x 1-3/8". For 6, 12 and 24 volt applications. Complete with two #10-32 stud terminals, and keps nuts. Blister packed.
Circuit Breaker - 30 Amps - 30055-30-Bp - 12-3005530Bpf1
Internal mounting bracket. Overall size 2" x 25/32" x 1-3/8". For 6, 12 and 24 volt applications. Complete with two #10-32 stud terminals, and keps nuts. Blister packed.
Circuit Breaker - 40 Amps - 30055-40-Bp - 12-3005540Bpf1
Internal mounting bracket. Overall size 2" x 25/32" x 1-3/8". For 6, 12 and 24 volt applications. Complete with two #10-32 stud terminals, and keps nuts. Blister packed.
Circuit Breaker - 50 Amps - 30055-50-Bp - 12-3005550Bpf1
Internal mounting bracket. Overall size 2" x 25/32" x 1-3/8". For 6, 12 and 24 volt applications. Complete with two #10-32 stud terminals, and keps nuts. Blister packed.
Coated Push Button Swtch W/12 - M-608-Bp - 12-M608Bpf1
Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Plasticized body sealed against moisture and dirt. Comes with 407-03 black moisture repellent rubber button cover that snaps over special face nut. Two 18 gauge wire leads, 12" long. Mounting stem is 5/8"-32 diameter, 15/16" long. Fits panels up through 1/2" thick.
Cole Hersee 02981028Bp Mega 298® Bolt Down Fuse Holder - 02981028-Bp - 12-02981028Bpf1
MEGA® Flex Series 32V Bolt-Down Fuse Holder makes it simple to install a MEGA® fuse up to 500 amps. Black flexible cover allows cable entry at 6 different positions and accommodates large wire sizes and ring terminal stack up. Interlocking pins on the sides of the fuse holder let you connect additional MEGA® 298 Bolt-Down Series fuse holders to create a multi-fuse block. Stainless steel M8 studs, hex nuts, and split washers included
Cole Hersee 04981038Bp Midi Flex® Bolt Down Fuse Holder - 04981038-Bp - 12-04981038Bpf1
MIDI® Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI® fuse. Its cover features 6 different positions for cable entry and accommodates large wire sizes and ring terminal stack up. Dovetail feature on the sides that lets you connect multiple MIDI® Flex Series fuse holders. Zinc-plated steel M5 studs and hex nuts. Bolt-down fuse holder base features M4 mounting holes.
Cole Hersee 11134Bp Universal Trailer Connector, 4-Pole - 11134-Bp - 12-11134Bpf1
Weatherproof connectors & wire lead assembliesPolarized to assure proper mating of circuitsMolded bodiesColor coded 16AWG wireConductors are properly aligned and bonded into the insulation, to assure minimal voltage drop, and for ease in connectingContact pins: bullet type terminal and receptacle
Cole Hersee 11173Bp Universal Trailer Connector, 3-Pole - 11173-Bp - 12-11173Bpf1
Weatherproof connectors & wire lead assembliesPolarized to assure proper mating of circuitsMolded bodiesColor coded 16AWG wireConductors are properly aligned and bonded into the insulation, to assure minimal voltage drop, and for ease in connectingContact pins: bullet type terminal and receptacle
Cole Hersee 24200Bx Latching Solenoid - 24200-Bx - 12-24200Bxf1
Single pole, single throw (SPST). 5/16"-24 / 10-32" hex nuts and lock washers included. Plated steel housing and copper contacts.
Cole Hersee 48070Bx Heavy Duty Battery Isolator, 70A - 48070-Bx - 12-48070Bxf1
For DC negative ground electrical systems. Isolate each battery to prevent the battery with the higher charge from draining into the battery with the lower charge. Allow two batteries to be charged simultaneously from a single power source. 70 Amp rating per leg, 2 legs. Three 1/4" stud terminals, 6-1/2" L x 3-1/4" W x 2-13/6" H.
Cole Hersee 48090 Heavy Duty Battery Isolator, 90A - 48090-Bx - 12-48090F1
For DC negative ground electrical systems. Isolate each battery to prevent the battery with the higher charge from draining into the battery with the lower charge. Allow two batteries to be charged simultaneously from a single power source. 90 Amp rating per leg, 2 legs. Three 1/4" stud terminals, 6-1/2" L x 3-1/4" W x 2-13/6" H.
Cole Hersee 48120 Heavy Duty Battery Isolator, 200A - 48120-Bx - 12-48120F1
For DC negative ground electrical systems. Isolate each battery to prevent the battery with the higher charge from draining into the battery with the lower charge. Allow two batteries to be charged simultaneously from a single power source. 200 Amp rating per leg, 2 legs. Three 1/4" stud terminals, 6-1/2" L x 3-1/4" W x 2-13/6" H.
Cole Hersee 5502004Bp Toggle Switch, On-Off Spst, Retail Pkg - 55020-04-Bp - 12-5502004Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 55020Bp Toggle Switch, (On)-Off Spst, Retail Pkg - 55020-Bp - 12-55020Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 5502104Bp Toggle Switch, (On)-Off-(On) Spdt, Retail Pkg - 55021-04-Bp - 12-5502104Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 55021Bp Toggle Switch, (On)-Off-(On) Spdt, Retail Pkg - 55021-Bp - 12-55021Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 55055Bp Toggle Switch, On-Off Spst, Retail Pkg - 55055-Bp - 12-55055Bpf1
12-36V DC (25A at 12V) Long handle. Silver contacts.
Cole Hersee 55081Bp Toggle Switch, (On)-Off-On Dpdt, Retail Pkg - 55081-Bp - 12-55081Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 55088Bp Toggle Switch, On-Off Spdt, Retail Pkg - 55088-Bp - 12-55088Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 5558Bp Light-Duty Toggle Switch - 5558-Bp - 12-5558Bpf1
10A at 12V DC. Silver contacts for corrosion resistance. Mounting stem and face nut are nickel plated brass. Handle: 15/32" L. Black bakelite with plated steel cap housing.
Cole Hersee 5582-10-Bx Spst Heavy Duty On/Off Toggle Switch, Boxed - 5582-10-Bx - 12-558210Bxf1
Heavy Duty SPST: Up: On, Down: Off. Weather-Resistant, PVC-Coated, Plasticized Housing. Standard handle. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread. Nickel-plated brass mounting hardware. Two 8" (203.2mm) leads. O-ring seal. Mounting stem is 11/32" (8.7mm) long, and fits panels up to 3/16" (4.8mm) thick.
Cole Hersee 558210Bp Spst Heavy Duty On/Off Toggle Switch, Retail Package - 5582-10-Bp - 12-558210Bpf1
Heavy Duty SPST: Up: On, Down: Off. Weather-Resistant, PVC-Coated, Plasticized Housing. Standard handle. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread. Nickel-plated brass mounting hardware. Two 8" (203.2mm) leads. O-ring seal. Mounting stem is 11/32" (8.7mm) long, and fits panels up to 3/16" (4.8mm) thick.
Cole Hersee 5582Bp Toggle Switch, On-Off Spst, Retail Pkg - 5582-Bp - 12-5582Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 5582Bx Toggle Switch, On-Off Spst, Boxed - 5582-Bx - 12-5582Bxf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 5586Bp Toggle Switch, On-Off-On Spdt, Retail Pkg - 5586-Bp - 12-5586Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 5588Bp Toggle Switch, On-Off Dpst, Retail Pkg - 5588-Bp - 12-5588Bpf1
12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Cole Hersee 5602701Bp Rocker Switch, Spst, Off/On (2-3) - 56027-01-Bp - 12-5602701Bpf1
Sealed switch without pilot lights. Silver contacts. Black matte housing. Rating: 25A at 12V DC. Actuator: 1.19" x .660". Panel thickness: 0.93" to .187". Snaps into standard rocker switch hole 1.45" x .08". On in parenthesis (On) indicates a momentary position.
Cole Hersee 5632701Bp Weather Resistant Rocker Switch W/Dependent Pilot Lights, On/Off, Spst - 56327-01-Bp - 12-5632701Bpf1
Sealed switch with Red pilot lights. Illuminates when switch is ON. Black plastic housing, bezel and actuator. Gasket sealed housing. Snap-in standard rocker switch mounting holes. Silver contacts. Brass screw and blade terminals. 25 amps at 12V DC. Fits panels .093" to .187" thick.
Cole Hersee 5802702Bp Rocker Switch, Spst, Off/On (2-3) - 58027-02-Bp - 12-5802702Bpf1
Sealed switch without pilot lights. Silver contacts. Black matte housing. Rating: 25A at 12V DC. Actuator: 1.19" x .660". Panel thickness: 0.93" to .187". Snaps into standard rocker switch hole 1.45" x .08". On in parenthesis (On) indicates a momentary position.
Cole Hersee 5802703Bp Rocker Switch Button - 58027-03-Bp - 12-5802703Bpf1
Snap-in panel mount rocker switch button.
Cole Hersee 5802711Bp Rocker Switch, Dpdt, (On)/Off/(On) - 58027-11-Bp - 12-5802711Bpf1
Sealed switch without pilot lights. Silver contacts. Black matte housing. Rating: 25A at 12V DC. Actuator: 1.19" x .660". Panel thickness: 0.93" to .187". Snaps into standard rocker switch hole 1.45" x .08". On in parenthesis (On) indicates a momentary position.
Cole Hersee 5832701Bp Weather Resistant Rocker Switch W/Dependent Pilot Lights, On/Off, Spst - 58327-01-Bp - 12-5832701Bpf1
Sealed switch with Red pilot lights. Illuminates when switch is ON. Black plastic housing, bezel and actuator. Gasket sealed housing. Snap-in standard rocker switch mounting holes. Silver contacts. Brass screw and blade terminals. 25 amps at 12V DC. Fits panels .093" to .187" thick.
Cole Hersee 5832706Bp Weather Resistant Rocker Switch W/Dependent Pilot Lights, On/Off/On, Spdt - 58327-06-Bp - 12-5832706Bpf1
Sealed switch with Red pilot lights. Illuminates when switch is ON. Black plastic housing, bezel and actuator. Gasket sealed housing. Snap-in standard rocker switch mounting holes. Silver contacts. Brass screw and blade terminals. 25 amps at 12V DC. Fits panels .093" to .187" thick.
Cole Hersee 58328103Bp Led-Enabled Rocker Switch, On/Off/On - 58328-103-Bp - 12-58328103Bpf1
24V Rocker Switch with Colored Pilot Lights. Designed for universal applications within harsh environments. Mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. Single-actuator switch commonly used for in-cabin controls. Snap-in mounting to fit panels .060" through .250" (1.5mm to 6.4mm). Fits standard panel hole .83" x 1.45" (21.1 x 36.8mm).
Cole Hersee 7522803Bx 3-Position, 2-Speed, Single Motor Wiper Switch - 75228-03-Bx - 12-7522803Bxf1
Electrical two-speed wiper switches. For heavy duty permanent magnet electric wiper motors. With dynamic parking: For use with Robert Bosch and Sprague Devices motors. 12V/24V DCSealed construction, including O-ring on the shaftBlack plastic knob w/metal insert & set screw, white imprintMounting stem 7/16" -28 thread, .45" (11.4mm) longDiecast case 1-5/8" (41.3mm) diameter
Cole Hersee 7560001 4-Position Dual Motor 3-Speed Wiper Switch - 75600-01-Bx - 12-7560001F1
Electronic wiper switches with intermittent delay feature for permanent magnet electric wiper motors. Ensures dependable control of windshield wiper on heavy duty vehicles. Control most two-speed wiper motorsPush-to-wash function for 1-3 wipes after releaseConform to SAE J1455, SAE J112a and J234Hex nut and lock washer included12/24VDCOff/Park - Intermittent Range - Low - High
Cole Hersee 7560004 4-Position Single Motor 3-Speed Wiper Switch - 75600-04-Bx - 12-7560004F1
Electronic wiper switches with intermittent delay feature for permanent magnet electric wiper motors. Ensures dependable control of windshield wiper on heavy duty vehicles. Control most two-speed wiper motorsPush-to-wash function for 1-3 wipes after releaseConform to SAE J1455, SAE J112a and J234Hex nut and lock washer included12/24VDCOff/Park - Intermittent Range - Low - High
Cole Hersee 880021Bp Sd Ato Fuse Block, 4-Gang - 880021-Bp - 12-880021Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100A
Cole Hersee 880022Bp Sd Ato Fuse Block, 6-Gang - 880022-Bp - 12-880022Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100A
Cole Hersee 880023Bp Sd Ato Fuse Block, 10-Gang - 880023-Bp - 12-880023Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100A
Cole Hersee 880024Bp Sd Mini Fuse Block, 4-Gang - 880024-Bp - 12-880024Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AMINI fuse block with LED blown fuse indicator
Cole Hersee 880025Bp Sd Mini Fuse Block, 6-Gang - 880025-Bp - 12-880025Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AMINI fuse block with LED blown fuse indicator
Cole Hersee 880026Bp Sd Mini Fuse Block, 10-Gang - 880026-Bp - 12-880026Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AMINI fuse block with LED blown fuse indicator
Cole Hersee 880027Bp St Ato Fuse Block, 6-Gang - 880027-Bp - 12-880027Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AST ATO® fuse block features an integrated negative busbar and includes a sheet of circuit identification labels. LED blown fuse indicator
Cole Hersee 880028Bp St Ato Fuse Block, 12-Gang - 880028-Bp - 12-880028Bpf1
Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AST ATO® fuse block features an integrated negative busbar and includes a sheet of circuit identification labels. LED blown fuse indicator
Cole Hersee 880062Bp Sr Series Master Disconnect Switch - 880062-Bp - 12-880062Bpf1
Isolates the batteries and eliminates battery drain when vehicle or vessel is stored overnight or longer periods. Black plastic construction will not corrode, stands up to roadsplash & salt sprayIngress protected to IP67/ IP69KDepth of only 3" (knob front to end of studs), to install in locations with limited space behind panelIgnition protected to SAE J1171 and ISO 8846 for installation in a battery boxStainless steel hardware and tin-plated copper contactSPST. Rating: 32V. Current Rating (Continuous) 300A
Cole Hersee 90030Bp Heavy Duty Push Button Switch W/Plated Steel Housing - 90030-Bp - 12-90030Bpf1
Recessed face nut designed to prevent accidental actuation. 2 screw terminals. O-Ring seal in the mounting stem. 5/8"-32 x 21/32"L stem. 35A @ 12V, 20A @ 24V rating.
Cole Hersee 9579Bp 4 Position Key Ignition Switch - 9579-Bp - 12-9579Bpf1
Standard body series is designed for universal applications within harsh environments. Acc/Off/Acc-Ign/Start without spring return or anti-restart. Key is removable in 'OFF' Position Only (where applicable). 4 screw terminals, zinc diecast housing. Face nut mount through 0.75" (19mm) 20 Panel Hole. 5A @ 12V DC (Start), 10A@12V DC (Acc, Ign/Run)
Cole Hersee Co. 24059Bp 12V Spst 65 Amp Solenoid - 24059-Bp - 12-24059Bpf1
Continuous duty solenoid. Insulated, with steel housing. Normally open contacts, one circuit: Off/On. 85A continuous.
Cole Hersee Fhas100Bp Sealed Ato In-Line Fuse Holder - Fhas100-Bp - 12-Fhas100Bpf1
Sealed in-line fuse holder designed to allow easy installation into potentially wet outside environments. Rated IP67 with sealed cover for moisture & dust resistance. Includes two 8" red GXL wire leads. Max Voltage: 32V DC. Fuse sold separately.
Cole Hersee Fhms200Bp Sealed Mini In-Line Fuse Holder - Fhms200-Bp - 12-Fhms200Bpf1
Sealed in-line fuse holder designed to allow easy installation into potentially wet outside environments. Rated IP67 with sealed cover for moisture & dust resistance. Includes two 8" red GXL wire leads. Max Voltage: 32V DC. Fuse sold separately.
Cole Hersee M284Bp 6-12V Battery Disconnect Swtch - M-284-Bp - 12-M284Bpf1
Single Pole. Two positions: Off-On. Rating: 6-36V DC; 175A continuous, 1000A intermittent /175A continuous. Die cast lever. Brass case. Long stem: 3/4" -16 thread. Dia. x 1-13/32 Long. Terminals: two 3/8" dia. studs. Fits panels up to 15/16" thick.
Cole Hersee M482 Switch Push-Pull, Bulk - M-482-Bx - 12-M482F1
1 circuit. Normally off. 2 positions: Off/On. Chrome plated brass knob face dia: 7/8". Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
Cole Hersee M485Bp Push Button Switch, Packaged - M-485-Bp - 12-M485Bpf1
Normally OFF. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Gasket sealed case protects against moisture and dust. Mounting stem is 5/8"-32 by 1" long. 2 brass terminals. Fits panels up through 3/4" thick.
Cole Hersee M531Bp 2 Circuit Push Pull Switch - M-531-Bp - 12-M531Bpf1
2 circuit. Normally off. 3 positions: Off - On #1 - On #2. Knob face dia: 3/4". Face nut, washer and hexnut. Permits two circuits (i.e., anchor and running lights) to be operated independently with one switch. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
Cole Hersee M532Bp Off-On-On Push-Pull 3 Circuit - M-532-Bp - 12-M532Bpf1
2 circuits. Normally off. 3 positions: Off - On #1 & #2 - On #1 & #3. Knob face dia.: 3/4". Especially suited for multiple lighting circuits such as cabin, anchor and running lights. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee M5411102Bp Toggle Switch/Illuminated Tip, On/Off/On Spdt - M-54111-02-Bp - 12-M5411102Bpf1
Illuminates red in the On position/Clear in the Off position. Black plastic housing and actuator. Silver contacts. 15/32" mounting stem. Blade terminals. Round lens in toggle tip. 25 Amps at 12V DC.
Cole Hersee M550Bp Battery Ignition Switch - M-550-Bp - 12-M550Bpf1
3 Positions Off - Ign - Ign/StartAll-Brass Construction. Chrome plated brass face nut. Brass mounting stem 13/16" - 24 x 1-7/32". 3 brass screw terminals. Rating at 12V: 10A ignition, 5A start.
Cole Hersee M606Bp Push-Pull Switch, Pvc Coated - M-606-Bp - 12-M606Bpf1
One circuit switch. Normally off. Two positions: off/on. S.P.S.T. Plasticized body sealed against moisture and dirt. Two 18 gauge insulated copper wire leads, 12" long. Mounting stem is 3/8" diameter and is complete with chrome plated brass knob and face nut. Knob face diameter is 7/8". Mounts in panels up to 5/8" thick. Rating 10A @ 12VDC, 6-36VDC. Boxed.
Cole Hersee M612Bp Momentary Push Button Switch Spst - M-612-Bp - 12-M612Bpf1
Normally Off. Off - Mom On (when button is depressed). Marine construction: brass case, plunger, hardware. Chrome-plated pushbutton and facenut. Oversized facenut helps prevent accidental actuation. Silver contacts. Fits panels up to 1" thick.
Cole Hersee M626 Push Button Switch, Bulk - M-626-Bx - 12-M626F1
Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Silver contacts. Molded plastic insulator with a protective barrier between terminals. Mounting stem 5/8"-32 diameter, 1-3/8" long. Fits panels up through 1" thick. Includes 407-03 black moisture repellent rubber button cover.
Cole Hersee M626Bp Push Button Switch - M-626-Bp - 12-M626Bpf1
Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Silver contacts. Molded plastic insulator with a protective barrier between terminals. Mounting stem 5/8"-32 diameter, 1-3/8" long. Fits panels up through 1" thick. Includes 407-03 black moisture repellent rubber button cover.
Cole Hersee M628 Push Pull Switch Chrome - M-628-Bx - 12-M628F1
1 circuit. Normally off. 2 positions: Off/On. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
Cole Hersee M628Bp Off-On Push Pull Switch - M-628-Bp - 12-M628Bpf1
1 circuit. Normally off. 2 positions: Off/On. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee M630Bx On-On Push Pull Switch - M-630-Bx - 12-M630Bxf1
2 circuit. Normally on. 2 positions: On/On. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee Mahcbp Maxi®_Mah Series In-Line Blade Fuse Holder - Mahc-Bp - 12-Mahcbpf1
32V In-Line blade fuse holder compatible with MAXI® blade-style fuses up to 60amps (sold separately). Center body hole enables easy mounting to a bulkhead. Heat-resistant thermoplastic housing and tethered fuse holder cover protects an installed MAXI® blade-style fuse up to 60 amps.
Cole Hersee Pl6Abp 12V Pilot Light, Amber Led - Pl-612-A-Bp - 12-Pl612Abpf1
12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Pl6Bbp 12V Pilot Light, Blue Led - Pl-612-B-Bp - 12-Pl612Bbpf1
12V DC Solid-state LED never needs replacement 12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Pl6Gbp 12V Pilot Light, Green Led - Pl-612-G-Bp - 12-Pl612Gbpf1
12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Xxx Weather Resistant Rocker Switch, (On)/Off, Spst - M-58031-07-Bp - 12-M5803107Bpf1
Certified to IP66 and IP68 for complete protection against dust and prolonged spray and submersion under pressure. Supplied with neoprene mounting gasket/panel seal. Ignition protected. Black plastic housing. Silver contacts. Removable actuators. 20 amps at 12 VDC. On in parenthesis (On) indicates a momentary position.
Cole Hersee Xxx Weather Resistant Rocker Switch, On/Off/On, Spdt - M-58031-02-Bp - 12-M5803102Bpf1
Certified to IP66 and IP68 for complete protection against dust and prolonged spray and submersion under pressure. Supplied with neoprene mounting gasket/panel seal. Ignition protected. Black plastic housing. Silver contacts. Removable actuators. 20 amps at 12 VDC. On in parenthesis (On) indicates a momentary position.
Connector/Round Body Trailer - M-121-Bp - 12-M121Bpf1
Durable rubber caps that protect connections against moisture and dirt. Corrosion resistant construction. Moisture repellent insulation. Brass contacts are polarized to assure proper mating of circuits.
Continuous Duty Solenoid - 24117-01-Bp - 12-2411701Bpf1
Marine construction. Plated steel case with added plastic coating. Insulated SPST, normally open. One circuit: Off/On. Bracket mounting holes 5/16" x 19/32" on 2-13/64" centers. Copper contacts and platicized steel housing. Continuous duty: 65A at 12V DC. Intermittent duty 750A make, 100A break. 10 sec. on, 30 min. off.
Continuous Duty Solenoid, 24V - 24063-Bx - 12-24063Bxf1
Insulated. Plated steel housing. SPST. Continuous rating: 85A. Maximum Current, Make 120A/ Break, 65ACopper terminals; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
Dual Alarms 12V Box Packed - 4112-Rc000-Bx - 12-4112Rcf1
RC Buzzer/LED Pilot light "Dual Alarm" Combination warning light and buzzer which operate simultaneously to indicate low oil pressure and high or low engine temperature. Universal application will fit any electrical switch. 12 volts DC. Red lens. 11/16" diameter x 17/32" long Mounting stem. Heavy steel case, plated to resist corrosion. Body size is 1-7/8" long, 1" wide and 1-11/32" high. Fits panels up through 13/64" thick. Wiring diagrams included.
Dual Battery Switch - M-750-Bp - 12-M750Bpf1
Permits current to be carried by either of 2 batteries, by 2 batteries simultaneously or cuts off all current at source. Ignition protected. Plastic case, knob and insulator. Four positions: OFF, ON-#1 Battery, ON-both batteries, and ON-#2 battery. Rating 6-36V DC; 310A Continuous, 500A intermittent 3/8" copper studs Size 6" flange diameter , Overall Height 2-5/8" Installation surface mount or install through a panel with a 3-5/16" dia. hole UL Listed. Marine UL Listed
Face Plate - 82065-Bx - 12-82065Bxf1
Face plate for disconnect switches without indexing pin. Polished aluminum with blue enamel finish. 2-1/2" diameter.
Fuse Block Term.10 Gang Carded - M-449-Bp - 12-M449Bpf1
Solid brass busbar safely carries up to 150A. Two 1/4" -20 diameter brass stud with hex nuts. 8-32 round head screws for attaching wires. Moisture repellent thermoplastic insulator base. 2 mounting holes. Safely carries up to 150 amps.
Ignition Switch - M-700-Bx - 12-M700F1
Four position: Acc - Off - Ign/Acc - Ing/Start. Die cast zinc housing w/aluminum adapter face nut. Fits 3/4-7/8" hole. 4 brass screw terminals. Rating at 12V: 5A ignition, 5A start, 10A accessory.
Ignition Switch 3 Pos. Carded - M-850-Bp - 12-M850Bpf1
Spring return from start to run. Heavy grade impact plastic body. Plastic boot at key end gives extra weather-resistance. Installs in panels with 7/8" dia. hole. Rating at 12V: 15A ignition, 5A start.
Kill Switch & Lanyard I/O & Ob - M-597-Bp - 12-M597Bpf1
Weather resistant switch provides added safety for boat operators. The lanyard connects the boater to a switch which kills the ignition circuit if the boater falls overboard, or is at an unsafe distance from the controls. Can be turned on again, if need be, by a boater other than the operator. Can be installed either in boat systems that require a grounded emergency stop, or in systems that have an open circuit emergency stop. Works on any powerboat with an inboard or outboard motor. Full wiring instructions included. Housing dimensions: 2-3/4" x 2". Requires a space of 1/2" behind the panel, and mounts in a 1-1/2" diameter hole. 10A at 12-24V DC.
Long Toggle Boot - 81264-Bp - 12-81264Bpf1
Durable rubber boot bonded to brass nut for positive seal. Protects against moisture and dirt. Fits standard toggle switches with 15/32"-32 mounting stems. Model 81255 allows toggle handle to protrude. Model 81264 completely covers toggle handle and accommodates toggle handles up through 11/16" long.
Off-On Toggle Longbat/Leads - M-584-Bp - 12-M584Bpf1
10A at 12V DC. Silver contacts. Chrome plated brass handle. Mounting stem and face nut are nickel plated brass. Keyway is in the down position. SPST. Handle is 11/16" long. Mounting stem is 15/32"-32 thread, 15/32" long. Fits panels up to 1/4" thick.
Off-On Toggle Switch W/Longbat - M-484-Bp - 12-M484Bpf1
10A at 12V DC. Silver contacts. Chrome plated brass handle. Mounting stem and face nut are nickel plated brass. Keyway is in the down position. SPST. Handle is 11/16" long. Mounting stem is 15/32"-32 thread, 15/32" long. Fits panels up to 1/4" thick.
On-Off-On Toggle Dpdt-6 Screw - 5592-Bp - 12-5592Bpf1
12-36V DC (25A at 12V). Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
Pull-Type Momentary Switch - M-486 - 12-M486F1
Features chrome plated brass knob embossed with "PULL", 7/8" knob face diameter and a mounting stem 3/8"-32 diameter and 1-1/4" long. Fits panels up through 7/8" thick. Pull to "on". Spring return to "off".
