Perko
Flush Mount Drain For Pipe, Chrome/Bronze - 0361005Chr - 9-0361005Chrf1
Chrome plated bronze body w/brass screen. The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.
Flush Lifting Handle, Chrome/Bronze, Sm. - 0776Dp1Chr - 9-0776Dp1Chrf1
Flush Lifting Handle, Chrome/Bronze, Small
Flush Lifting Handle, Chrome/Bronze, Lg. - 0776Dp2Chr - 9-0776Dp2Chrf1
Flush Lifting Handle, Chrome/Bronze, Large
Flush Hinge - 0272Dp0Chr - 9-0272Dp0Chrf1
Chrome plated stamped brass. Semi concealed, for overlay doors.
Flush Hatch Dog - 0777000Chr - 9-0777000Chrf1
For securely "Dogging" (fastening) deck hatches. Chrome plated brass and stainless steel lock nuts. Flush strike. O-ring seals for water resistance. Does not rattle when dogged down. Maximum hatch thickness 2".
Fender Locks (2/Cd) - 1299Dp0Chr - 9-1299Dp0Chrf1
Chrome plated zinc. Eye is to be permanently attached to fender line. ID eye is 3/8". OD flange is 1-1/2". Screw size is 8.
Fastener Thumbscrew Only - 071900099A - 9-071900099Af1
Chrome plated brass with black plastic knob. Screw size is 8. Angle width is 1". Angle length is 1-3/8".
Elbow Catch - 1056Dp0Chr - 9-1056Dp0Chrf1
Chrome plated zinc with stainless steel spring.
Durable Type Fasteners-Stud100 - 0869000Sts - 9-0869000Stsf1
Stainless Snap Stud, 5/8" Screw, 100/Pk
Double Contact Bayonet Socket - 0052Dp - 9-0052Dpf1
For discontinued lights. 11/16" OD.
Double Contact Bayonet Light Socket - 0024Dp1 - 9-0024Dp1F1
For lights on vessels under 20 m. Plastic body, brass spring.
Door Catches (2/Card) - 0559Dp - 9-0559Dpf1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Door Catch 2Pc Male/Female - 559 - 9-0559F1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Door Catch - 0554Dp - 9-0554Dpf1
White plastic and chrome plated brass screws. Screw/stud is 3/4" x #8.
Door Button W/Spring - 1216Dp0Chr - 9-1216Dp0Chrf1
Chrome plated zinc with black plastic knob. 1216 has phosphor bronze tension spring and item 1217 comes without spring and requires a #8 oval-head pivot screw.
Deck Plate Key - 1247Dp0Blk - 9-1247Dp0Blkf1
Black plastic. Fits Perko 1-1/4" and 1-1/2" deck plates and many other "Slot" type opening deck plates 1-1/8" center-to-center of lugs, 1" spade length.
Deck Fill Waste For 1-1/2 Pipe - 0524Dp0Chr - 9-0524Dp0Chrf1
Chrome plated bronze. Deck plate key (#1248-8DP) and O-ring included.
Deck Fill Waste For 1-1/2 Hose - 1269Dp0Chr - 9-1269Dp0Chrf1
Chrome plated zinc alloy. Black plastic cap, slotted between the holes. Complete with deck plate key (#1248-8DP) and O-ring.
D.C. Bay Socket W/60 Pigtail - 0024Dp2 - 9-0024Dp2F1
For lights on vessels under 20 m. Plastic body, brass spring.
Curtain Fastenener Flange Stud - 100 - 0994000Nkl - 9-0994000Nklf1
Nickel plated brass.
Cupboard Catch W/Offset Strik - 1102Dp2Chr - 9-1102Dp2Chrf1
Chrome plated zinc. Spacer Included to Allow for Additional (3/16") Offset
Cupboard Catch W/Flush Strike - 1102Dp1Chr - 9-1102Dp1Chrf1
Chrome plated zinc.Includes box strike.
Cowl Ventilator - 0870Dp0Chr - 9-0870Dp0Chrf1
Chrome plated zinc. 3" duct threads into neck. Hose clamps not required. Cowl/Mouth opening is 7-1/3". Screw size is #10.
Complete Liner W/Lip & Tube - 0483Dp2Blk - 9-0483Dp2Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Complete Liner W/Lip & Tube - 0483Dp1Blk - 9-0483Dp1Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Complete Liner W/Lip & Tube - 0482Dp1Blk - 9-0482Dp1Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Compact Battery Switch No Lock - 8511Dp - 9-8511Dpf1
Compact, medium duty. Requires 1/3 less space to mount with the same bolt pattern as the standard size. Popular 90° easy-to-identify position rotation. For use with 12, 24, and 32 volt systems. Higher capacity - 315 continuous, and 450 intermittent. Smooth, positive position selector. UL listed Std. 1107, CE.4-3/4" Diameter, 1-7/8" Deep
Combo Gas Fill & Tank Vent-Wh - 0542Dpgwht - 9-0542Dpgwhtf1
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.
Combo Gas Fill & Tank Vent-Bl - 0542Dpgblk - 9-0542Dpgblkf1
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.
Combination Gas Fill & Tank Vent W/Straight Neck - 0541Dpgchr - 9-0541Dpgchrf1
Straight neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540G00Chr - 9-0540G00Chrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540Dpgchr - 9-0540Dpgchrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Comb Masthead/All-Round Light - 1125Dp4Chr - 9-1125Dp4Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, chrome plated brass base (3-3/8" x 2-1/4") with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube & gold plated contacts. Deck mount. Clear lenses. 12V bulbs included. Screw size is 8.
Cockpit Scupper - 0323Dp - 9-0323Dpf1
Thru-hull scupper with nut is used for mounting through the transom. Extra long length allows mounting on 2-1/8" thick surface, for use with 1-1/2" hose. Flange diameter 2-7/8"; white. Soft black flapper. Nut and mounting hardware included.
Cockpit Scupper - 0285Dp - 9-0285Dpf1
Molded white plastic. Flush mount. For use when discharge is above waterline. Insert prevents passage of large objects without restricting water flow. Flange: 2-3/4" OD; 1-1/2" ID.
Cleat 8" Open Base Chrome Plated - 1188Dp8Chr - 9-1188Dp8Chrf1
Chrome plated zinc alloy.
Cleat 6" Open Base Chrome Plated - 1188Dp6Chr - 9-1188Dp6Chrf1
Chrome plated zinc alloy.
Cleat 4" Open Base Chrome Plated 2/Cd - 1188Dp4Chr - 9-1188Dp4Chrf1
Chrome plated zinc alloy.
Cleat 3" Chrome Plated Zinc 2/Cd - 0566Dp3Chr - 9-0566Dp3Chrf1
Chrome plated zinc alloy.
Clamp-On Fishing Rod Holder - 1215Dp0Chr - 9-1215Dp0Chrf1
Chrome plated zinc alloy with polished stainless steel tube, hard black plastic liner. Clamp-on feature eliminates drilling rail and simplifies relocation. Mounts on vertical or horizontal rails. 7/8" to 1" diameter and 3/4" diameter by reducing mounting bolt length.
Clam Shell Ventilator - 0339Dp0Chr - 9-0339Dp0Chrf1
Chrome plated brass. Screw size is 6.
Chrome Plated Zinc Watertight Electrical Deck Connection - 1190Dp0Chr - 9-1190Dp0Chrf1
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size #6. Not ignition protected. Conforms to U.S.C.G. electrical standards.
Chrome Plated Zinc Rope Deck Pipe - 0757Dp0Chr - 9-0757Dp0Chrf1
Carded. Uses #8 fasteners.
Chrome Plated Brass Watertight Deck Connection - 1189Dp0Chr - 9-1189Dp0Chrf1
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size #6. Not ignition protected. Conforms to U.S.C.G. electrical standards.
Chrome Plated Brass Gas Tank Vent F-5/8 Hos - 0509Dp4Chr - 9-0509Dp4Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Gas Tank Vent F-3/4 Hos - 0509Dp5Chr - 9-0509Dp5Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Gas Tank Vent F-1/2 Pip - 0515Dp4Chr - 9-0515Dp4Chrf1
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chromalex Locking Gas Fill - 1399Dp0Chr - 9-1399Dp0Chrf1
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.
Chromalex Locking Gas Cap - 1324Dp0Blk - 9-1324Dp0Blkf1
Black plastic cap with built-in five pin tumbler lock. Supplied with two keys. Gasketed to prevent possible moisture from entering the tank. This locking cap will fit all Perko Chromalex gas fills already in use. Skin packed.
Chromalex Gas Fill - 1313Dp0Chr - 9-1313Dp0Chrf1
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.
Chromalex Cowl Ventilator - 1312Dp0Chr - 9-1312Dp0Chrf1
Chrome plated zinc cowl with black plastic base. 3" Duct hose threads into neck. Hose clamps not required. Mouth opening is 8 square inches. Screw size is #8.
Canvas Snap Button, 100 Pack - 0896000Nkl - 9-0896000Nklf1
Nickel Plated Brass Canvas Snap Button, 100 Pack
Butt Hinges - 0941Dp0Chr - 9-0941Dp0Chrf1
Chrome plated zinc. Screw size is #8. Overall width is 1-1/2". Open length is 1-1/2".
Boat Cover Sockets - 0578Dp0Chr - 9-0578Dp0Chrf1
Chrome plated zinc sockets will accommodate 3/8" battens up to 1 3/4" wide. Measure 3 1/4"L x 5/8"W. #6 screw.
Black Plastic Gas Fill & Tank Vent W/Angled Neck - 1318Dpgblk - 9-1318Dpgblkf1
Plastic. Integral tank vent with flame arrestor. No plate key or ground wire required. Connects to 1-1/2" fill hose and 5/8" vent hose. Flip top cap. Use #10 screws.
Black Plastic Dek Plate Key - 124878Dp - 9-124878Dpf1
Plain zinc. 1-1/2" key has 1" spade on handle that allows them to fit many other slot type opening deck plates.
Bicolor Light White 12V - 0252Wb0Dp1 - 9-0252Wb0Dp1F1
For use on power driven vessels under 20 meters (65.6 ft) in length. 2-mile visibility. Plastic construction. 12V bulb included. Screw size is 8.
Bi-Color Light -Black - 0252Bb0Dp1 - 9-0252Bb0Dp1F1
For use on power driven vessels under 20 meters (65.6 ft) in length. 2-mile visibility. Plastic construction. 12V bulb included. Screw size is 8.
Battswitch W/Alternator Disconnect - 8503Dp - 9-8503Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Alternator Field Disconnect (AFD) Models, when used with non-utilized alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Battery Switch - 8501Dp - 9-8501Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Angled Flush Mount Rod Holder - 1205Dp0Chr - 9-1205Dp0Chrf1
Chrome plated zinc alloy flange, anodized aluminum tube, soft black liner and flange gasket with integral flip-up cap.
Angled Flush Mount Rod Holder - 0452Dp0Sts - 9-0452Dp0Stsf1
Polished stainless steel flange, anodized aluminum tube, soft black liner and flange gasket with integral flip-up cap. Fasteners: #10.
All-Round Light Fold-Down Mt - 1637Dp0Chr - 9-1637Dp0Chrf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top with clear fluted lens and frosted globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. 12V bulbs included. Screw size is 8.
All-Round Light Fold-Down Mt - 1634Dp0Chr - 9-1634Dp0Chrf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top with clear fluted lens and frosted globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. 12V bulbs included. Screw size is 8.
All-Rd Pole Light White Vert Mt - 1137Dp0Chr - 9-1137Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Height: 14". 12V bulb included. Screw size is 8.
All-Rd Pole Light White Horz Mt - 1134Dp0Chr - 9-1134Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Height: 14". 12V bulb included. Screw size is 8.
Adjustable Deck Plate Key - 0826Dp0Chr - 9-0826Dp0Chrf1
Chrome plated zinc. Hardened steel pins. Will fit sizes up to 8" diameter.
9-1672Dp0Alu Led White All-Round Led Light, Adjustable Folding Mount, 14" - 1672Dp0Alu - 9-1672Dp0Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility Polymer Top and Base with Clear Frosted Lens3/4" aluminum tube pole with quick adjustable baseStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 AmpsMade in the USA
9-1670Dp2Alu Led White-All Round Light, Fold-Down Mount, 24" - 1670Dp2Alu - 9-1670Dp2Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polymer Top and Base with Clear Frosted Lens3/4" silver aluminum polesStylish high-tech design with self-contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmIncludes both vertical mount base (installed) and a horizontal baseScrew Size: #81.28 Watts. 0.10 AmpsMade in the USA
9-1670Dp0Alu Led White-All Round Light, Fold-Down Mount, 14" - 1670Dp0Alu - 9-1670Dp0Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polymer Top and Base with Clear Frosted Lens3/4" silver aluminum polesStylish high-tech design with self-contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmIncludes both vertical mount base (installed) and a horizontal baseScrew Size: #81.28 Watts. 0.10 AmpsMade in the USA
9-1659Dp0Alu Tower Mount Led White All-Round Light, 4" - 1659Dp0Alu - 9-1659Dp0Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer top and base with clear frosted lens3/4" aluminum tube poleStylish high-tech design with self contained LED module. LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR-2nmScrew Size: #81.28 Watts, 0.10 ampsMade in the USA
9-1658Dp2Alu Led White All-Round Light-Fixed Mount, 12" - 1658Dp2Alu - 9-1658Dp2Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer Top and base with clear frosted lens3/4" Aluminum tube poleStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 Amps
9-1658Dp1Alu Led White All-Round Light-Fixed Mount, 4" - 1658Dp1Alu - 9-1658Dp1Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer Top and base with clear frosted lens3/4" Aluminum tube poleStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 AmpsMade in the USA
9-0626Dp0Sts Led Horizontal Mount Side Lights - 0626Dp0Sts - 9-0626Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft.). 2nm visibility. Polished stainless steel top with black polymer base, High tech, self contained LED modulesNew stylish low profile design. Similar footprint as the 0615/ 0616 LED lightsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew size: #62.5 Watts, 0.21 ampsMade in the USA
9-0625Dp0Sts Led Horizontal Mount Bi-Color Light - 0625Dp0Sts - 9-0625Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polished stainless steel top with black polymer base, High tech, self contained LED modulesNew stylish low profile design. Similar footprint as the 0615/ 0616 LED lightsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR 2nmScrew Size: #62.5 Watts, 0.21 ampsMade in the USA
9-0618Dp0Sts Led Vertical Mount Side Lights - 0618Dp0Sts - 9-0618Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Stainless steel top with black polymer baseDesigned to be mounted only on a vertical surfaceMeets Global Specifications for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16, the '72 COLREGS and the U.S. Inland RulesScrew Size: #62.5 Watts, 0.21 AmpsMade in the USA
8-3/8X2-1/4 Step Plates (2/Cd - 1325Dp0Chr - 9-1325Dp0Chrf1
Chrome plated with soft black plastic pads.
8-3/4X3-1/4 Step Plates (2/Cd - 1325Dp1Chr - 9-1325Dp1Chrf1
Chrome plated with soft black plastic pads.
