Perko
Black Plastic Gas Fill & Tank Vent W/Angled Neck - 1318Dpgblk - 9-1318Dpgblkf1
Plastic. Integral tank vent with flame arrestor. No plate key or ground wire required. Connects to 1-1/2" fill hose and 5/8" vent hose. Flip top cap. Use #10 screws.
Boat Cover Sockets - 0578Dp0Chr - 9-0578Dp0Chrf1
Chrome plated zinc sockets will accommodate 3/8" battens up to 1 3/4" wide. Measure 3 1/4"L x 5/8"W. #6 screw.
Butt Hinges - 0941Dp0Chr - 9-0941Dp0Chrf1
Chrome plated zinc. Screw size is #8. Overall width is 1-1/2". Open length is 1-1/2".
Canvas Snap Button, 100 Pack - 0896000Nkl - 9-0896000Nklf1
Nickel Plated Brass Canvas Snap Button, 100 Pack
Chromalex Cowl Ventilator - 1312Dp0Chr - 9-1312Dp0Chrf1
Chrome plated zinc cowl with black plastic base. 3" Duct hose threads into neck. Hose clamps not required. Mouth opening is 8 square inches. Screw size is #8.
Chromalex Gas Fill - 1313Dp0Chr - 9-1313Dp0Chrf1
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.
Chromalex Locking Gas Cap - 1324Dp0Blk - 9-1324Dp0Blkf1
Black plastic cap with built-in five pin tumbler lock. Supplied with two keys. Gasketed to prevent possible moisture from entering the tank. This locking cap will fit all Perko Chromalex gas fills already in use. Skin packed.
Chromalex Locking Gas Fill - 1399Dp0Chr - 9-1399Dp0Chrf1
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.
Chrome Plated Brass Gas Tank Vent F-1/2 Pip - 0515Dp4Chr - 9-0515Dp4Chrf1
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Gas Tank Vent F-3/4 Hos - 0509Dp5Chr - 9-0509Dp5Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Gas Tank Vent F-5/8 Hos - 0509Dp4Chr - 9-0509Dp4Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Watertight Deck Connection - 1189Dp0Chr - 9-1189Dp0Chrf1
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size #6. Not ignition protected. Conforms to U.S.C.G. electrical standards.
Chrome Plated Zinc Rope Deck Pipe - 0757Dp0Chr - 9-0757Dp0Chrf1
Carded. Uses #8 fasteners.
Chrome Plated Zinc Watertight Electrical Deck Connection - 1190Dp0Chr - 9-1190Dp0Chrf1
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size #6. Not ignition protected. Conforms to U.S.C.G. electrical standards.
Clam Shell Ventilator - 0339Dp0Chr - 9-0339Dp0Chrf1
Chrome plated brass. Screw size is 6.
Clamp-On Fishing Rod Holder - 1215Dp0Chr - 9-1215Dp0Chrf1
Chrome plated zinc alloy with polished stainless steel tube, hard black plastic liner. Clamp-on feature eliminates drilling rail and simplifies relocation. Mounts on vertical or horizontal rails. 7/8" to 1" diameter and 3/4" diameter by reducing mounting bolt length.
Cleat 3" Chrome Plated Zinc 2/Cd - 0566Dp3Chr - 9-0566Dp3Chrf1
Chrome plated zinc alloy.
Cleat 4" Open Base Chrome Plated 2/Cd - 1188Dp4Chr - 9-1188Dp4Chrf1
Chrome plated zinc alloy.
Cleat 6" Open Base Chrome Plated - 1188Dp6Chr - 9-1188Dp6Chrf1
Chrome plated zinc alloy.
Cleat 8" Open Base Chrome Plated - 1188Dp8Chr - 9-1188Dp8Chrf1
Chrome plated zinc alloy.
Cockpit Scupper - 0285Dp - 9-0285Dpf1
Molded white plastic. Flush mount. For use when discharge is above waterline. Insert prevents passage of large objects without restricting water flow. Flange: 2-3/4" OD; 1-1/2" ID.
Cockpit Scupper - 0323Dp - 9-0323Dpf1
Thru-hull scupper with nut is used for mounting through the transom. Extra long length allows mounting on 2-1/8" thick surface, for use with 1-1/2" hose. Flange diameter 2-7/8"; white. Soft black flapper. Nut and mounting hardware included.
Comb Masthead/All-Round Light - 1125Dp4Chr - 9-1125Dp4Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, chrome plated brass base (3-3/8" x 2-1/4") with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube & gold plated contacts. Deck mount. Clear lenses. 12V bulbs included. Screw size is 8.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540Dpgchr - 9-0540Dpgchrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540G00Chr - 9-0540G00Chrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Straight Neck - 0541Dpgchr - 9-0541Dpgchrf1
Straight neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combo Gas Fill & Tank Vent-Bl - 0542Dpgblk - 9-0542Dpgblkf1
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.
Combo Gas Fill & Tank Vent-Wh - 0542Dpgwht - 9-0542Dpgwhtf1
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.
Compact Battery Switch No Lock - 8511Dp - 9-8511Dpf1
Compact, medium duty. Requires 1/3 less space to mount with the same bolt pattern as the standard size. Popular 90° easy-to-identify position rotation. For use with 12, 24, and 32 volt systems. Higher capacity - 315 continuous, and 450 intermittent. Smooth, positive position selector. UL listed Std. 1107, CE.4-3/4" Diameter, 1-7/8" Deep
Complete Liner W/Lip & Tube - 0482Dp1Blk - 9-0482Dp1Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Complete Liner W/Lip & Tube - 0483Dp1Blk - 9-0483Dp1Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Complete Liner W/Lip & Tube - 0483Dp2Blk - 9-0483Dp2Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Cowl Ventilator - 0870Dp0Chr - 9-0870Dp0Chrf1
Chrome plated zinc. 3" duct threads into neck. Hose clamps not required. Cowl/Mouth opening is 7-1/3". Screw size is #10.
Cupboard Catch W/Flush Strike - 1102Dp1Chr - 9-1102Dp1Chrf1
Chrome plated zinc.Includes box strike.
Cupboard Catch W/Offset Strik - 1102Dp2Chr - 9-1102Dp2Chrf1
Chrome plated zinc. Spacer Included to Allow for Additional (3/16") Offset
Curtain Fastenener Flange Stud - 100 - 0994000Nkl - 9-0994000Nklf1
Nickel plated brass.
D.C. Bay Socket W/60 Pigtail - 0024Dp2 - 9-0024Dp2F1
For lights on vessels under 20 m. Plastic body, brass spring.
Deck Fill Waste For 1-1/2 Hose - 1269Dp0Chr - 9-1269Dp0Chrf1
Chrome plated zinc alloy. Black plastic cap, slotted between the holes. Complete with deck plate key (#1248-8DP) and O-ring.
Deck Fill Waste For 1-1/2 Pipe - 0524Dp0Chr - 9-0524Dp0Chrf1
Chrome plated bronze. Deck plate key (#1248-8DP) and O-ring included.
Deck Plate Key - 1247Dp0Blk - 9-1247Dp0Blkf1
Black plastic. Fits Perko 1-1/4" and 1-1/2" deck plates and many other "Slot" type opening deck plates 1-1/8" center-to-center of lugs, 1" spade length.
Door Button W/Spring - 1216Dp0Chr - 9-1216Dp0Chrf1
Chrome plated zinc with black plastic knob. 1216 has phosphor bronze tension spring and item 1217 comes without spring and requires a #8 oval-head pivot screw.
Door Catch - 0554Dp - 9-0554Dpf1
White plastic and chrome plated brass screws. Screw/stud is 3/4" x #8.
Door Catch 2Pc Male/Female - 559 - 9-0559F1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Door Catches (2/Card) - 0559Dp - 9-0559Dpf1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Double Contact Bayonet Light Socket - 0024Dp1 - 9-0024Dp1F1
For lights on vessels under 20 m. Plastic body, brass spring.
Double Contact Bayonet Socket - 0052Dp - 9-0052Dpf1
For discontinued lights. 11/16" OD.
Durable Type Fasteners-Stud100 - 0869000Sts - 9-0869000Stsf1
Stainless Snap Stud, 5/8" Screw, 100/Pk
Elbow Catch - 1056Dp0Chr - 9-1056Dp0Chrf1
Chrome plated zinc with stainless steel spring.
Fastener Thumbscrew Only - 071900099A - 9-071900099Af1
Chrome plated brass with black plastic knob. Screw size is 8. Angle width is 1". Angle length is 1-3/8".
Fender Locks (2/Cd) - 1299Dp0Chr - 9-1299Dp0Chrf1
Chrome plated zinc. Eye is to be permanently attached to fender line. ID eye is 3/8". OD flange is 1-1/2". Screw size is 8.
Flush Hatch Dog - 0777000Chr - 9-0777000Chrf1
For securely "Dogging" (fastening) deck hatches. Chrome plated brass and stainless steel lock nuts. Flush strike. O-ring seals for water resistance. Does not rattle when dogged down. Maximum hatch thickness 2".
Flush Hinge - 0272Dp0Chr - 9-0272Dp0Chrf1
Chrome plated stamped brass. Semi concealed, for overlay doors.
Flush Lifting Handle, Chrome/Bronze, Lg. - 0776Dp2Chr - 9-0776Dp2Chrf1
Flush Lifting Handle, Chrome/Bronze, Large
Flush Lifting Handle, Chrome/Bronze, Sm. - 0776Dp1Chr - 9-0776Dp1Chrf1
Flush Lifting Handle, Chrome/Bronze, Small
Flush Mount Drain For Pipe, Chrome/Bronze - 0361005Chr - 9-0361005Chrf1
Chrome plated bronze body w/brass screen. The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.
Flush Pull - 1221Dp0Chr - 9-1221Dp0Chrf1
Chrome plated zinc with black plastic finishing flange. Spring loaded. Can be mounted horizontally or vertically.
Flush Pulls Flush Latch, Black - 1092Dp3Blk - 9-1092Dp3Blkf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. #3 Straight cam bar 1-1/4" - 1-7/8"
Flush Pulls Flush Latch, Black - 1092Dp4Blk - 9-1092Dp4Blkf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. #4 Extra long offset cam bar 1/2" - 3"
Flush Pulls Flush Latch, White - 1092Dp1Wht - 9-1092Dp1Whtf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate.#1 Offset cam bar 3/4" - 2-3/8"
Flush Ring Catch - 1051Dp0Chr - 9-1051Dp0Chrf1
Chrome plated zinc with phosphor bronze spring.
Flushing Strainer, 1-1/4",Cast Bronze Strainer Includes A Fresh Water Port And A Smooth - 0593007Plb - 9-0593007Plbf1
Cast bronze strainer includes a fresh water port and a smooth, low-torque ball valve so you can switch from straining raw water to flushing with fresh water instantly. Can be used for inboard engines or generators. The handle indicates the flow direction and it uses standard Perko strainer repair parts. Top casting removes easily for basket cleaning. Can also be used in an emergency as an engine driven bilge pump. Reversible bulkhead mounting option. Made in USA. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Fog Horn - 0162Dp0Wht - 9-0162Dp0Whtf1
Aluminum with white baked enamel finish and nylon mouthpiece. Conforms to ABYC standard A-23 in accordance with the 72 Colregs and US inland rules for use on vessels under 5 meters (16.4 feet).
Garboard Drain Plug - 0124000Plb - 9-0124000Plbf1
Cast bronze flange and brass plug. Complete with zinc plated steel wrench. Screw size is 10. Threaded neck is 1". Pipe size is 1". Flange O.D. is 3-1/8".
Garboard Drain Plugs - 0363Dp0Plb - 9-0363Dp0Plbf1
Cast bronze. Flange O.D. is 2-3/8". Pipe size is 3/4". Screw size is 8 where applicable. Neck is threaded.
Gas Fill - 1613Dp0Blk - 9-1613Dp0Blkf1
Fiber reinforced, UV stabilized Black plastic. No deck plate key or ground wire required. Easy grip cap. O-ring and cap retainer included.
Gas Tank Vent W/Elbow F-1/2 P - 0503Dp4Chr - 9-0503Dp4Chrf1
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Gas Tank Vent W/Splash Shiel - 0506Dp4Chr - 9-0506Dp4Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Hatch Fastener (1) - 0769Dp0Chr - 9-0769Dp0Chrf1
Chrome plated brass and zinc. Black plastic handle.
Hatch Fastener/Windshield Keeper - 0697Dp0Chr - 9-0697Dp0Chrf1
Chrome plated brass and zinc. Keeper is 1-1/2" x 5/8".
Hatch Pulls Flush Lock, White - 1091Dp1Wht - 9-1091Dp1Whtf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate.#1 Offset cam bar 3/4" - 2-3/8"
Hawse Hole Plate - 0752000Chr - 9-0752000Chrf1
Chrome plated bronze. Inside: 2-1/8 x 4-1/8".
Heavy Duty Battery Switch - 8603Dp - 9-8603Dpf1
For use with systems from 6-32 volts. Capacity - rated 380 amps continuous, 850 amps intermittent (5 minutes on, 5 minutes off). 1/2" Diameter brass battery terminals. UL Listed.
