Perko
Plastic. Integral tank vent with flame arrestor. No plate key or ground wire required. Connects to 1-1/2" fill hose and 5/8" vent hose. Flip top cap. Use #10 screws.... More Details
Chrome plated zinc sockets will accommodate 3/8" battens up to 1 3/4" wide. Measure 3 1/4"L x 5/8"W. #6 screw.... More Details
Chrome plated zinc alloy.... More Details
Chrome plated zinc. Screw size is #8. Overall width is 1-1/2". Open length is 1-1/2".... More Details
Nickel Plated Brass Canvas Snap Button, 100 Pack... More Details
Chrome plated zinc cowl with black plastic base. 3" Duct hose threads into neck. Hose clamps not required. Mouth opening is 8 square inches. Screw size is #8.... More Details
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.... More Details
Chrome plated. Black plastic base.... More Details
Black plastic cap with built-in five pin tumbler lock. Supplied with two keys. Gasketed to prevent possible moisture from entering the tank. This locking cap will fit all Perko Chromalex gas fills alr... More Details
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.... More Details
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.... More Details
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.... More Details
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.... More Details
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw ... More Details
Chrome plated.... More Details
Carded. Uses #8 fasteners.... More Details
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw ... More Details
Chrome plated brass. Screw size is 6.... More Details
Chrome plated zinc alloy with polished stainless steel tube, hard black plastic liner. Clamp-on feature eliminates drilling rail and simplifies relocation. Mounts on vertical or horizontal rails. 7/8"... More Details
Chrome plated zinc alloy.... More Details
Chrome plated zinc alloy.... More Details
Chrome plated zinc alloy.... More Details
Chrome plated zinc alloy.... More Details
Plain aluminum.... More Details
Plain aluminum.... More Details
Molded white plastic. Flush mount. For use when discharge is above waterline. Insert prevents passage of large objects without restricting water flow. Flange: 2-3/4" OD; 1-1/2" ID.... More Details
Thru-hull scupper with nut is used for mounting through the transom. Extra long length allows mounting on 2-1/8" thick surface, for use with 1-1/2" hose. Flange diameter 2-7/8"; white. Soft black flap... More Details
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, chrome plated brass base (3-3/8" x 2-1/4... More Details
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.... More Details
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.... More Details
Straight neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.... More Details
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.... More Details
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.... More Details
Compact, medium duty. Requires 1/3 less space to mount with the same bolt pattern as the standard size. Popular 90° easy-to-identify position rotation. For use with 12, 24, and 32 volt systems. Higher... More Details
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.... More Details
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.... More Details
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.... More Details
Chrome plated zinc. 3" duct threads into neck. Hose clamps not required. Cowl/Mouth opening is 7-1/3". Screw size is #10.... More Details
Chrome plated zinc.Includes box strike.... More Details
Chrome plated zinc. Spacer Included to Allow for Additional (3/16") Offset... More Details
Nickel plated brass.... More Details
Nickel plated brass.... More Details
For lights on vessels under 20 m. Plastic body, brass spring.... More Details
Chrome plated zinc alloy. Black plastic cap, slotted between the holes. Complete with deck plate key (#1248-8DP) and O-ring.... More Details
Chrome plated bronze. Deck plate key (#1248-8DP) and O-ring included.... More Details
Black plastic. Fits Perko 1-1/4" and 1-1/2" deck plates and many other "Slot" type opening deck plates 1-1/8" center-to-center of lugs, 1" spade length.... More Details
Chrome plated zinc with black plastic knob. 1216 has phosphor bronze tension spring and item 1217 comes without spring and requires a #8 oval-head pivot screw.... More Details
White plastic and chrome plated brass screws. Screw/stud is 3/4" x #8.... More Details
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".... More Details
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".... More Details
Chrome plated zinc with rubber bumper.... More Details
For lights on vessels under 20 m. Plastic body, brass spring.... More Details
For discontinued lights. 11/16" OD.... More Details
Stainless Snap Stud, 5/8" Screw, 100/Pk... More Details
Chrome plated zinc with stainless steel spring.... More Details
Black plastic with integral spring.... More Details
Chrome plated zinc.... More Details
Chrome plated zinc.... More Details
Chrome plated brass with black plastic knob. Screw size is 8. Angle width is 1". Angle length is 1-3/8".... More Details
Chrome plated zinc. Eye is to be permanently attached to fender line. ID eye is 3/8". OD flange is 1-1/2". Screw size is 8.... More Details
Chrome plated bronze.... More Details
For securely "Dogging" (fastening) deck hatches. Chrome plated brass and stainless steel lock nuts. Flush strike. O-ring seals for water resistance. Does not rattle when dogged down. Maximum hatch thi... More Details
Chrome plated.... More Details
Chrome plated stamped brass. Semi concealed, for overlay doors.... More Details
Flush Lifting Handle, Chrome/Bronze, Large... More Details
Flush Lifting Handle, Chrome/Bronze, Small... More Details
Chrome plated bronze body w/brass screen. The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.... More Details
Black plastic. Easily installs. #6 Fasteners.... More Details
Chrome plated zinc. #6 Fasteners.... More Details
Chrome plated zinc with black plastic finishing flange. Spring loaded. Can be mounted horizontally or vertically.... More Details
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. #3 Straight cam bar 1-1/4" - 1-7/8"... More Details
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. #4 Extra long offset cam bar 1/2" - 3"... More Details
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate.#1 Offset cam bar 3/4" - 2-3/8"... More Details
Chrome plated zinc with phosphor bronze spring.... More Details
Chrome plated.... More Details
Chrome plated.... More Details
Flushing Strainer, 1-1/4",Cast Bronze Strainer Includes A Fresh Water Port And A Smooth - 0593007Plb - 9-0593007Plbf1
Perko
$1,122.51
Cast bronze strainer includes a fresh water port and a smooth, low-torque ball valve so you can switch from straining raw water to flushing with fresh water instantly. Can be used for inboard engines ... More Details
Aluminum with white baked enamel finish and nylon mouthpiece. Conforms to ABYC standard A-23 in accordance with the 72 Colregs and US inland rules for use on vessels under 5 meters (16.4 feet).... More Details
Cast bronze flange and brass plug. Complete with zinc plated steel wrench. Screw size is 10. Threaded neck is 1". Pipe size is 1". Flange O.D. is 3-1/8".... More Details
Cast bronze. 3/4" I.P.S.... More Details
Made of cast bronze.... More Details
Cast bronze. Flange O.D. is 2-3/8". Pipe size is 3/4". Screw size is 8 where applicable. Neck is threaded.... More Details
Fiber reinforced, UV stabilized Black plastic. No deck plate key or ground wire required. Easy grip cap. O-ring and cap retainer included.... More Details
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.... More Details
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.... More Details
Chrome plated brass and zinc. Black plastic handle.... More Details
Chrome plated brass and zinc. Keeper is 1-1/2" x 5/8".... More Details
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate.#1 Offset cam bar 3/4" - 2-3/8"... More Details
Chrome plated bronze. Inside: 2-1/8 x 4-1/8".... More Details
For use with systems from 6-32 volts. Capacity - rated 380 amps continuous, 850 amps intermittent (5 minutes on, 5 minutes off). 1/2" Diameter brass battery terminals. UL Listed.... More Details
