Seastar Solutions
Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5275 - 1-Hh5275F1
For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.
Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5250 - 1-Hh5250F1
For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.
Seastar Ap1233 12V Type 2 100 Cubic Inch Autopilot Pump - Compatible W/ Standard Seastar Hoses - Ap1233 - 1-Ap1233F1
Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. Long life 12 VDC motor (i.e. long life brushes)Compact designSimplified installationLow power consumptionABYC, CE and J1171 compliantSuperior corrosion resistanceQuiet operationMounting bracket includedStand alone or mounts to SeaStar Power Assist unit
Seastar 212151003 Sl-3 Cable Adapter Kit - 212151-003 - 1-212151003F1
For use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters.
Safe-T/Qc Tilt Helm, Single Engine - Sh91523-1P - 1-Sh915231Pf1
Single cable tilt helm for inboards and power-assisted stern drives.Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. Same widely accepted QC spring & Hitch Pin feature available on both sides of the helm.Requires SH91800P tilt mechanism to complete Tilt Steering system installation.
Safe-T Quick Connect Helm Only, Single - Sh5094-1P - 1-Sh50941Pf1
SH50941P: Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. The widely accepted QC spring & hitch pin feature available on both sides of the helm.
Red Knob - 4009912 - 1-4009912F1
Replacement control knobs fit most controls with 3/8-24 threaded handles.
Qcii Helm Converter - Sa27620P - 1-Sa27620Pf1
Quick Connect II for helms withthreaded spigots SA27620P (Upgrades older Teleflex/Seastar Solutions rotary helms to Quick-Connect cable interface, allowing use of SSC61/SSC62 QC cables).
Pivots 30 Series 1/4" Dia - 31539 - 1-031539F1
Pivot for 3300 series cables
Pivot Kit - Ca27563P - 1-Ca27563Pf1
Brass. Heavy duty. Fits Teleflex Morse and other control cables with 10-32 ends. Kit contains 2 each of pivot end, bushing, cotter pin and washer. For use on CH4400 or CH5600 series controls.
Omc/Johnson/Evinrude Connection Kit - Ca27247P - 1-Ca27247Pf1
This kit is for use with CC170 series cables, over 35HP, 1973-1978.
Omc Cable Kit - 301729 - 1-301729F1
Kit adapts 33C or 33C supreme for use with Evinrude/Johnson 55-235HP 1978 to 1985, 20HP and up in 1986, 20-25-30HP motors may need OMC kit 397488.
Nfb™ Saft-T Ii Rotary™ Helm - Sh5150P - 1-Sh5150Pf1
Collet & hitch pin secure QC cable to helmOne bolt holds spent travel tube
Nfb™ Rack & Nfb™ Pro Rack™ - Backmount - Sh5230P - 1-Sh5230Pf1
Four bolts and nuts secure cable's rack housing to helmDual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications. Helm requires current generation rack cables (will not bolt up to older style cables)Helm has No FeedBack™ featureHelm/cable install as unit from back of dashFits: SS151XX (NFB Rack Single Cable), SS152XX (NFB Pro Rack Dual Cable)
Nfb™ 4.2 Steering Helm, Single - Sh4910P - 1-Sh4910Pf1
Two bolts secure QC cable to helmOne bolt holds spent travel tube.No feedback feature
Nfb™ 4.2 Steering Helm, Dual - Sh4920P - 1-Sh4920Pf1
Two bolts secure QC cable to helmOne bolt holds spent travel tube.No feedback feature
Nfb 4.2 Tilt Helm - Sh91526P - 1-Sh91526Pf1
Single cable No Feedback tilt helm. For engnies up to V6 where single cable steering is used. Requires separate tilt mechanism SH91800P.
Neutral Safety Switch - 300928 - 1-300928F1
For use with CH4400 series controls.
Neut. Safety Switch Kit Ch4400 - Ca68075P - 1-Ca68075Pf1
For use with CH4400 series controls.
Mercruiser Engine Connection Kit - 302123 - 1-302123F1
For 3300/33C style cables
Martyr Ha5521 Tournament Drive Bracket Hardware Kit - Ha5521 - 1-Ha5521F1
The Tournament Drive Bracket kit is for use with our Adjustable Tie Bars on standard SeaStar steering cylinders. This series of hardware kits will allow the consumer to take full advantage of all the features and benefits of our heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes proven Tournament series adjustable tie barsAnodized aluminum adjustable tie bar with built in maximum stroke indicatorHigh strength forged aluminum drive bracketEliminates the need for cut-to-length traditional tie bars Shown with standard cylinder(s) and tie bar (sold separately)
Martyr Ha5520 Tournament Drive Bracket Hardware Kit - Ha5520 - 1-Ha5520F1
The Tournament Drive Bracket kit is for use with our Adjustable Tie Bars on standard SeaStar steering cylinders. This series of hardware kits will allow the consumer to take full advantage of all the features and benefits of our heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes proven Tournament series adjustable tie barsAnodized aluminum adjustable tie bar with built in maximum stroke indicatorHigh strength forged aluminum drive bracketEliminates the need for cut-to-length traditional tie bars Shown with standard cylinder(s) and tie bar (sold separately)
Low Hp O/B Eng. Spacer - Ho5090 - 1-Ho5090F1
SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Kit Ss Tilt Sport -4 Hydraulic Steering Kit - Hk6400Ts-4 - 1-Hk6400Ts4F1
Johnson / Evinrude Connection Kit - Ca27208P - 1-Ca27208Pf1
This kit is for use with CC170 series cables, 35HP and below, 1973-78.
Hydraulic Fluid, Quart - Ha5430H - 1-Ha5430Hf1
SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and a water emulsification additive SeaStar Hydraulic Steering Fluid is the ONLY steering fluid which is Validated and Performance Matched to ensure the optimum performance and safety of SeaStar Solutions Hydraulic Steering Systems
Hydraulic Fluid, Gallon - Ha5440H - 1-Ha5440Hf1
SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and a water emulsification additive SeaStar Hydraulic Steering Fluid is the ONLY steering fluid which is Validated and Performance Matched to ensure the optimum performance and safety of SeaStar Solutions Hydraulic Steering Systems
High Performance Tilt Helm - Sh91650P - 1-Sh91650Pf1
Single cable tilt helm. For power-assisted stern drives. Requires separate tilt mechanism SH91800P.
Helm Jet Boat Steering 135° - Sh5087P - 1-Sh5087Pf1
Designed exclusively for jet boats, JBS features a choice of two steering arcs, a real steering cable (not a control cable) plus an assortment of mounting options for virtually any boat.
H.P. Back Mount Rack Tilt Helm - Sh91630P - 1-Sh91630Pf1
High-Performance back mount, single-cable rack & pinion helm. Requires separate tilt mechanism SH91800P.
Dual Station Throttle Unit Only - 207572 - 1-207572F1
The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in two stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included.Parts Required:Single Engine Dual Stations:1 DS Gear Unit (207573)1 Station Selector Unit (204993)1 DS Throttle Unit (177030)1 cable from Selector to DS Gear Unit (CCX633xx)1 cable from Station 1 to DS Gear Unit (CCX633xx)1 cable from Station 2 to DS Gear Unit (CCX633xx)1 cable from DS Gear Unit to transmission (CCX633xx)1 cable from Station 1 to DS Throttle Unit (CCX633xx)1 cable from Station 2 to DS Throttle Unit (CCX633xx)1 engine adapter kit for control cables (unless provided by mfg)Dual Engine Dual Stations:2 DS Gear Unit (207573)1 Station Selector Unit (204993)2 DS Throttle Unit (177030)2 cables from Selector to DS Gear Unit (CCX633xx)1 cable from Port Station 1 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 1 to DS Gear Unit (CCX633xx)1 cable from Port Station 2 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 2 to DS Gear Unit (CCX633xx)2 cables from DS Gear Units to transmissions (CCX633xx)1 cable from Port Station 1 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)1 cable from Port Station 2 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)2 engine adapter kits for control cables (unless provided by mfg)
Dual Station Throttle Unit - 177030 - 1-177030F1
The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in two stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included.Parts Required:Single Engine Dual Stations:1 DS Gear Unit (207573)1 Station Selector Unit (204993)1 DS Throttle Unit (177030)1 cable from Selector to DS Gear Unit (CCX633xx)1 cable from Station 1 to DS Gear Unit (CCX633xx)1 cable from Station 2 to DS Gear Unit (CCX633xx)1 cable from DS Gear Unit to transmission (CCX633xx)1 cable from Station 1 to DS Throttle Unit (CCX633xx)1 cable from Station 2 to DS Throttle Unit (CCX633xx)1 engine adapter kit for control cables (unless provided by mfg)Dual Engine Dual Stations:2 DS Gear Unit (207573)1 Station Selector Unit (204993)2 DS Throttle Unit (177030)2 cables from Selector to DS Gear Unit (CCX633xx)1 cable from Port Station 1 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 1 to DS Gear Unit (CCX633xx)1 cable from Port Station 2 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 2 to DS Gear Unit (CCX633xx)2 cables from DS Gear Units to transmissions (CCX633xx)1 cable from Port Station 1 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)1 cable from Port Station 2 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)2 engine adapter kits for control cables (unless provided by mfg):
Dual Station Selector Unit - 204993 - 1-204993F1
The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in two stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included.Parts Required:Single Engine Dual Stations:1 DS Gear Unit (207573)1 Station Selector Unit (204993)1 DS Throttle Unit (177030)1 cable from Selector to DS Gear Unit (CCX633xx)1 cable from Station 1 to DS Gear Unit (CCX633xx)1 cable from Station 2 to DS Gear Unit (CCX633xx)1 cable from DS Gear Unit to transmission (CCX633xx)1 cable from Station 1 to DS Throttle Unit (CCX633xx)1 cable from Station 2 to DS Throttle Unit (CCX633xx)1 engine adapter kit for control cables (unless provided by mfg)Dual Engine Dual Stations:2 DS Gear Unit (207573)1 Station Selector Unit (204993)2 DS Throttle Unit (177030)2 cables from Selector to DS Gear Unit (CCX633xx)1 cable from Port Station 1 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 1 to DS Gear Unit (CCX633xx)1 cable from Port Station 2 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 2 to DS Gear Unit (CCX633xx)2 cables from DS Gear Units to transmissions (CCX633xx)1 cable from Port Station 1 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)1 cable from Port Station 2 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)2 engine adapter kits for control cables (unless provided by mfg)
Dual Station Gear Shift Unit Only - 207573 - 1-207573F1
The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in two stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included.Parts Required:Single Engine Dual Stations:1 DS Gear Unit (207573)1 Station Selector Unit (204993)1 DS Throttle Unit (177030)1 cable from Selector to DS Gear Unit (CCX633xx)1 cable from Station 1 to DS Gear Unit (CCX633xx)1 cable from Station 2 to DS Gear Unit (CCX633xx)1 cable from DS Gear Unit to transmission (CCX633xx)1 cable from Station 1 to DS Throttle Unit (CCX633xx)1 cable from Station 2 to DS Throttle Unit (CCX633xx)1 engine adapter kit for control cables (unless provided by mfg)Dual Engine Dual Stations:2 DS Gear Unit (207573)1 Station Selector Unit (204993)2 DS Throttle Unit (177030)2 cables from Selector to DS Gear Unit (CCX633xx)1 cable from Port Station 1 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 1 to DS Gear Unit (CCX633xx)1 cable from Port Station 2 to DS Gear Unit (CCX633xx)1 cable from Starboard Station 2 to DS Gear Unit (CCX633xx)2 cables from DS Gear Units to transmissions (CCX633xx)1 cable from Port Station 1 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)1 cable from Port Station 2 to DS Throttle Unit (CCX633xx)1 cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)2 engine adapter kits for control cables (unless provided by mfg)
Dual Station Cable Hardware Kit - Ca69022P - 1-Ca69022Pf1
Patented Self-Locking Throttle makes it the only control that stops cable creep in single or in series multi-station applications. No need for cable brakes or other friction devices. Single function control - each lever controls throttle OR shift. Can be user-configured as either Push or Pull to operate throttle and/or shift. Utilizes 3300/33C type cables. Additional hardware required for dual station use.
Dometic Xtreme No Feedback Steering Kit - Ssx17625 - 1-Ssx17625F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17623 - 1-Ssx17623F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17621 - 1-Ssx17621F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17620 - 1-Ssx17620F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17619 - 1-Ssx17619F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation.Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Seastar Solutions steering systems. Fits in the standard Seastar Solutions dash cut out for a standard Safe-T and 4.2 bracket.Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezelIncludes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17618 - 1-Ssx17618F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17617 - 1-Ssx17617F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17616 - 1-Ssx17616F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17615 - 1-Ssx17615F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17614 - 1-Ssx17614F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17613 - 1-Ssx17613F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17612 - 1-Ssx17612F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xtreme No Feedback Steering Kit - Ssx17611 - 1-Ssx17611F1
The smoothest and lowest steering effort mechanical helm offered with a quick connect feature on both the steering cable and travel tube. The helm features a reliable Zamak casting and zinc plated steel construction with improved high efficiency custom gear train and NFB (No FeedBack) function for smoother operation. Application: Inboard installations up to 34' with a single engine. Installs in the same mounting pattern and bracket location as current Dometic steering systems. Fits in the standard dash cut out for a standard Safe-T and 4.2 bracket. Features:Patented No FeedBack steering mechanismXTREME high efficiency cable for smooth operationSuperior helm strength with a smooth feel and low effortNew style bezel Includes:XTREME™ NFB helm, bezel, and hardware kit (SHX7606) with QC steering cable (SSCX64XX).
Dometic Xpa1012P Xtreme Power Assist - Xpa1012P - 1-Xpa1012Pf1
The Xtreme Power Assist Steering is engineered to bring the smooth, easy control of electric power-assisted steering to a wide range of popular boats, including pontoons, runabouts, RIBS, aluminum fishing boats and center consoles. This is an affordable, easy-to-install solution that offers a more enjoyable driving experience. Significantly reduced steering effort provides a car-like driving experience for mechanically steered boatsEngineered to fit a wide range of single engine, mechanically steered outboard boats from 90-200HPIntegrates with any existing SeaStar rack or rotary cable steering system, so there is no need to install new steering to take advantage of this new technologyDesigned as a self-contained, plug-and-play system which easily mounts to all major outboard brands and integrates with the boat's existing mechanical steering in less than 30 minutesBuilt in Fail-Safe System automatically reverts to mechanical steering in the event of a system failure12' Wire harness included.
Dometic Stt3701R Seastar Trim Tab System W/Dial Controller & 4-1/4" Stroke Actuators W/O Tabs - Stt3701R - 1-Stt3701Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttons 13" Actuators: 4-1/4" stroke
Dometic Stt3601R Seastar Trim Tab System W/Dial Controller W/O Tabs - Stt3601R - 1-Stt3601Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttons 11.5" Standard Actuators: 2-1/4" stroke
Dometic Stt3233R Seastar Trim Tab System, Stubby Actuatorss, Edge Mount W/Dial Controller, 9" X 12" - Stt3233R - 1-Stt3233Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 10" Stubby Actuators: 2-1/4" stroke
Dometic Stt3231R Seastar Trim Tab System, Stubby Actuatorss, Edge Mount W/Dial Controller, 12" X 12" - Stt3231R - 1-Stt3231Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 10" Stubby Actuators: 2-1/4" stroke
Dometic Stt3205R Seastar Trim Tab System, Edge Mount W/Dial Controller, 9" X 12" - Stt3205R - 1-Stt3205Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 11.5" Standard Actuators: 2-1/4" stroke
Dometic Stt3133R Seastar Trim Tab System, Stubby Actuators W/Dial Controller, 9" X 12" - Stt3133R - 1-Stt3133Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 10" Stubby Actuators: 2-1/4" stroke
Dometic Stt3131R Seastar Trim Tab System, Stubby Actuators W/Dial Controller, 9" X 12" - Stt3131R - 1-Stt3131Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 10" Stubby Actuators: 2-1/4" stroke
Dometic Stt3107R Seastar Trim Tab System W/Dial Controller, 12" X 9" - Stt3107R - 1-Stt3107Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 11.5" Standard Actuators: 2-1/4" stroke
Dometic Stt3105R Seastar Trim Tab System W/Dial Controller, 12" X 12" - Stt3105R - 1-Stt3105Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 11.5" Standard Actuators: 2-1/4" stroke
Dometic Stt3103R Seastar Trim Tab System W/Dial Controller, 9" X 12" - Stt3103R - 1-Stt3103Rf1
Our intuitive dial controller is simple to adjust to get your boat on plane quickly and efficiently. A programmable favorites button makes for effortless operation. The auto-retract feature ensures reliability and safety, whatever the conditions. All systems include 2 electric actuators, dial controller & harness. Turn the 2-1/4" dial and the actuators quickly level the boatSingle press bow up and bow down along with auto homeIntuitive dial controller with one touch buttonsMarine grade 316 stainless hardwareTabs are 304 stainless steel, 12 gauge 11.5" Standard Actuators: 2-1/4" stroke
Dometic Ssc135 Backmount Rack Dual Cable, 14' - Ssc13514 - 1-Ssc13514F1
All Teleflex Marine steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements. Features a tightly controlled core to conduit fit to offer precise steering. The outer jacket is constructed with HDPE (High Density PolyEthylene) that is abrasion resistant and provides a high resistance to water penetration. All cables feature output ends constructed of stainless steel material. Applications: Standard rack cable fits SH5210P, SH5230P, SH91619P, and SH91639P.
Dometic Ssc135 Backmount Rack Dual Cable, 13' - Ssc13513 - 1-Ssc13513F1
All Teleflex Marine steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements. Features a tightly controlled core to conduit fit to offer precise steering. The outer jacket is constructed with HDPE (High Density PolyEthylene) that is abrasion resistant and provides a high resistance to water penetration. All cables feature output ends constructed of stainless steel material. Applications: Standard rack cable fits SH5210P, SH5230P, SH91619P, and SH91639P.
Dometic Solutions No Feedback 4.2 Rotary Steering Kit - Ss14719 - 1-Ss14719F1
With the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock out steering loads, Teleflex's 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steered boats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required. Applications: Suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. 4.2 accepts wheels up to 16" diameter. Replaces nearly all Teleflex Safe-T® steering systems without dash modification.Features:Patented No FeedBack™ Steering mechanismComfortable 4.2 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH4910P - No FeedBack HelmSB27150P 90° - Bezel KitSSC62XX - Steering Cable
Dometic Solutions No Feedback 4.2 Rotary Steering Kit - Ss14718 - 1-Ss14718F1
With the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock out steering loads, Teleflex's 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steered boats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required. Applications: Suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. 4.2 accepts wheels up to 16" diameter. Replaces nearly all Teleflex Safe-T® steering systems without dash modification.Features:Patented No FeedBack™ Steering mechanismComfortable 4.2 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH4910P - No FeedBack HelmSB27150P 90° - Bezel KitSSC62XX - Steering Cable
Dometic Safe-T Quick Connect Rotary Steering Kit - Ss13720 - 1-Ss13720F1
Great for power steered boats in which No FeedBack™ systems are not required. Safe-T® QC offers the quick response of three-turn steering, and easy installation with a patented, no-tools-required cable connection at the helm.Applications: Virtually all power-assisted sterndrive boats with wheels up to 16" diameter. Replaces all Teleflex/Seastar Solutions Safe-T helms made since 1968 with little or no dash modifications. Components are available for dual cable systems, but we recommend No-FeedBack steering for all dual cable steered, non-power-assisted outboards and sterndrives. Features:Quick-response of 3 turns lock-to-lockStandard 3/4" round tapered steering shaftStainless steel cable output endsMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH5094P - HelmSB27484P 90° - Bezel KitSSC62XX - Steering Cable
Dometic Safe-T Quick Connect Rotary Steering Kit - Ss13719 - 1-Ss13719F1
Great for power steered boats in which No FeedBack™ systems are not required. Safe-T® QC offers the quick response of three-turn steering, and easy installation with a patented, no-tools-required cable connection at the helm.Applications: Virtually all power-assisted sterndrive boats with wheels up to 16" diameter. Replaces all Teleflex/Seastar Solutions Safe-T helms made since 1968 with little or no dash modifications. Components are available for dual cable systems, but we recommend No-FeedBack steering for all dual cable steered, non-power-assisted outboards and sterndrives. Features:Quick-response of 3 turns lock-to-lockStandard 3/4" round tapered steering shaftStainless steel cable output endsMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH5094P - HelmSB27484P 90° - Bezel KitSSC62XX - Steering Cable
