Seastar Solutions
Seastar Ha4641 Baystar Adapter Plate - Converts Hc4645H To Hc4647H - Ha4641 - 1-Ha4641F1
Kit - Converts HC4645 To HC4647 for Honda '98 & later
Seastar Ha4642 Baystar Adapter Plate - Converts Hc4645H To Hc4648H - Ha4642 - 1-Ha4642F1
Kit - Changes HC4645 Into HC4648 for J/E '77-'89, 65-150 HP
Seastar Ha4643 Baystar Adapter Plate - Converts Hc4645H To Hc4658H - Ha4643 - 1-Ha4643F1
Kit - Changes HC4645 Into HC4658 for J/E 40-140 HP 4-Stroke
Seastar Ha5438 Bleed Hose - Use For Seastar Outboard Steering Kit - Ha5438 - 1-Ha5438F1
Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly.
Seastar Ha5450 Helm Remote Fill Kit For Capilano Systems - Ha5450 - 1-Ha5450F1
Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube.
Seastar Ha5458H Hydraulic Fluid, 5-Gallon Pail - Ha5458H - 1-Ha5458Hf1
SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and a water emulsification additive SeaStar Hydraulic Steering Fluid is the ONLY steering fluid which is Validated and Performance Matched to ensure the optimum performance and safety of SeaStar Solutions Hydraulic Steering Systems
Seastar Ha5461 Dual Cylinder Adapter For Power Purge Jr. - Ha5461 - 1-Ha5461F1
The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.Features:Speed, quality, and ease-of-operationExtended portablility for use in the field - weighs only 12 poundsConvenient electrical hook-up utilizing an avail able12-volt boat battery
Seastar Ha5477 Grounding Strap For O/B Cylinder - Ha5477 - 1-Ha5477F1
The grounding strap kit is designed to provide added protection against corrosion caused by stray current. This is designed for use on the SeaStar and BayStar front mount outboard cylinders. Included with all new SeaStar front mount cylinders.
Seastar Ha5731 Capilano 18" Hose Kit For Copper Tubing (2 Hoses) - Ha5731 - 1-Ha5731F1
Contains two hoses 18" long. For single cylinder applications. Supplied with 1/2" swivel flare nuts on each end. Required of steering systems installed with copper tubing to accommodate slight cylinder movement.
Seastar Ha5822 High Strength Tiller Bolt W/ Nylock Nut 3/8" - Ha5822 - 1-Ha5822F1
SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Seastar Ha6801 Hardware Kit Only | Use For Hc6845 Tournament Series Single Engine Single Cylinder - Ha6801 - 1-Ha6801F1
Hardware Kit
Seastar Ha6802 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Single Cylinder - Ha6802 - 1-Ha6802F1
Hardware Kit
Seastar Ha6804 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Dual Cylinder - Ha6804 - 1-Ha6804F1
Hardware Kit
Seastar Ha6806 Hardware Kit Only | Use For Hc6845 Tournament Series Triple Engine Dual Cylinder - Ha6806 - 1-Ha6806F1
Hardware Kit
Seastar Hc46453 Basic Baystar Compact Cylinder - Hc4645-3 - 1-Hc46453F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc46473 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4647-3 - 1-Hc46473F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc46483 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4648-3 - 1-Hc46483F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc46583 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4658-3 - 1-Hc46583F1
This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.
Seastar Hc5312-3 Inboard 7" Stroke 7.2 Cubic Inch Cylinder - Model Ba125-7Atm - Hp6023 Seal Kit - Hc5312-3 - 1-Hc53123F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc5313-3 Inboard 7" Stroke 8.3 Cubic Inch Atm Aluminum Cylinder - Model Ba135-7Atm - Hc5313-3 - 1-Hc53133F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc5314-3 Inboard 7" Stroke 10.2 Cubic Inch Cylinder - Model Ba150-7Atm - Hp6025 Seal Kit - Hc5314-3 - 1-Hc53143F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc53193 Inboard 7" Stroke 13.7 Cubic Inch Cylinder - Model Ba175-7Tm - Hs5183 Seal Kit - Hc5319-3 - 1-Hc53193F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc5326-3 Sterndrive 7" Stroke 8.3 Cubic Inch Cylinder | Model Ba150-7Em | Hs5156 Seal Kit - Hc5326-3 - 1-Hc53263F1
Can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface.
Seastar Hc5328-3 Sterndrive 8" Stroke 8.3 Cubic Inch Cylinder | Model Ba125-8Em | Hs5154 Seal Kit - Hc5328-3 - 1-Hc53283F1
Can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface.
Seastar Hc5332 Sterndrive 7" Stroke 8.3 Cubic Inch Cylinder - Model Ba135-7Em - Hs5155 Seal Kit - Hc5332 - 1-Hc5332F1
Can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface.
Seastar Hc5351 Capilano Inboard 7" Stroke Ball Joint Cylinder - Hc5351 - 1-Hc5351F1
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
Seastar Hc53733 Capilano Inboard 9" Stroke Ball Joint Cylinder - Hc5373-3 - 1-Hc53733F1
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
Seastar Hc5375-3 Front Mount Outboard 8" Stroke 8.34 Cubic Inch Catamaran Cylinder - Hs5157 Seal Kit - Hc5375-3 - 1-Hc53753F1
The SeaStar front mount pivot cylinder is for Catamaran designs. This cylinder will fit ALL engines that require HC5345 steering cylinder. The internal o-ring is designed to limit the amount of fluid bypass decreasing the amount of re-alignment. This cylinder is best used in applications that require a liquid tiebar.Cylinder ending in "3" has been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Hc5379 Capilano Inboard 11" Stroke 26 Cubic Inch Brass Cylinder - Model Ba 200-11 - Hs5185 Seal Kit - Hc5379 - 1-Hc5379F1
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
Seastar Hc6358-3 Pro Front Pivot Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hs5157 Seal Kit - Hc6358-3 - 1-Hc63583F1
The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Systems require the use of a SeaStar Pro helm and reinforced Kevlar hoses only(1500 psi).All cylinders ending in "3" have been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Hc6845 Tournament Series Front Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hp6160 Seal Kit - Hc6845 - 1-Hc6845F1
Engineered to provide today's high-powered offshore tournament boats and other high-performance vessels with precise, smooth and reliable steering. This heavy-duty cylinder is designed to work with all new and existing Teleflex & Seastar Solutions SeaStar hydraulic helms, providing an instant steering upgrade for a wide variety of boats. Features a rugged design with heavy-duty support brackets, barrel, shaft and seals, together with superior corrosion resistance for serious sea duty. Each cylinder is universal, allowing a variety of mounting configurations, with single, dual or triple cylinder installations to match the outboards on the transom. Independent bleeder fittings allow for better and easier system bleeding compared to tee fittings, especially in multiple engine installations. Each cylinder is equipped with stainless steel ORB elbow fittings that can be easily oriented in any direction for easy and clean rigging of hydraulic steering hoses. Teleflex's new patent-pending pivot plate design are reversible from left to right and provide smooth articulation and sealed joints for superior performance.The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. There is no cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Hc6845S Tournament Series Front Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder | Hp6160 Seal Kit - Hc6845S - 1-Hc6845Sf1
Engineered to provide today's high-powered offshore tournament boats and other high-performance vessels with precise, smooth and reliable steering. This heavy-duty cylinder is designed to work with all new and existing Teleflex & Seastar Solutions SeaStar hydraulic helms, providing an instant steering upgrade for a wide variety of boats. Features a rugged design with heavy-duty support brackets, barrel, shaft and seals, together with superior corrosion resistance for serious sea duty. Each cylinder is universal, allowing a variety of mounting configurations, with single, dual or triple cylinder installations to match the outboards on the transom. Independent bleeder fittings allow for better and easier system bleeding compared to tee fittings, especially in multiple engine installations. Each cylinder is equipped with stainless steel ORB elbow fittings that can be easily oriented in any direction for easy and clean rigging of hydraulic steering hoses. Teleflex's new patent-pending pivot plate design are reversible from left to right and provide smooth articulation and sealed joints for superior performance.The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. There is no cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s). These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Hf6005 Orb Tee Fitting Kit - 3/8" Tube - 2 Per Kit - Hf6005 - 1-Hf6005F1
Tournament series ORB tee fitting kit.
Seastar Hf6006 Stainless Steel Vertical Tee Fitting For Seastar Steering Cylinders & Helm Pumps - 2 Per Kit - Hf6006 - 1-Hf6006F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6007 Fitting Kit With 25' Tubing (Ht5092) For Seastar Helms - Use For -3 Models Only - Hf6007 - 1-Hf6007F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6008 1/2" Nf Nylon Brass Nuts, 6/Sets - Hf6008 - 1-Hf6008F1
SeaStar HF6008 1/2" NF Nylon Brass Nuts, 6/pk
Seastar Hf6009 Straight 3/8" Fitting Kit For Seastar & Baystar Helm Pumps - 2 Per Kit - Hf6009 - 1-Hf6009F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6010 3/8" Fitting Kit For Seastar Helms - Hf6010 - 1-Hf6010F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6011 45 Degree Elbow 3/8" Fitting For Seastar & Baystar Helm Pumps - 2 Per Kit - Hf6011 - 1-Hf6011F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Hf6012 5 Orb (M) 1/4" Npt (F) Fitting Kit For Seastar Helms - 3 Per Kit - Hf6012 - 1-Hf6012F1
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.
Seastar Ho5009 Tie Bar Kit For Side Mount Cylinder - Ho5009 - 1-Ho5009F1
SeaStar HO5009 Tie Bar Kit for Side Mount Cylinder. Includes bar and extension plate for twin engines.
Seastar Ho5035 Engine Adapter Plate For Single Mercury (1989 To Date) - Ho5035 - 1-Ho5035F1
SeaStar HO5035 Engine Adapter Plate for Single Mercury (1989 to Date). Includes bar and extension plate for twin engines.
Seastar Ho6003 Universal Tie Bar Kit For Port Engine To Drive Cylinder - Ho6003 - 1-Ho6003F1
SeaStar HO6003 Universal Tie Bar Kit for Port Engine to Drive Cylinder.
Seastar Ho6010 36" Mechanical Tie Bar Kit For Small Kicker Trolling Motor - Ho6010 - 1-Ho6010F1
For hooking up a small kicker motor for trolling. Compatible with HC5345 or HC5358 steering cylinders.
Seastar Ho6819 Tournament Series Adjustable Tie Bar - Ho6819 - 1-Ho6819F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6820 Tournament Series Adjustable Tie Bar - Ho6820 - 1-Ho6820F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6821 Tournament Series Adjustable Tie Bar - Ho6821 - 1-Ho6821F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s). These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6822 Tournament Series Adjustable Tie Bar - Ho6822 - 1-Ho6822F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Ho6823 Tournament Series Adjustable Tie Bar - Ho6823 - 1-Ho6823F1
The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Hp4600 Gland / Seal Kit For Hydraulic Cylinder, Fits Hc4645H/Hc4647H/Hc4648H/Hc4658H - Hp4600 - 1-Hp4600F1
For use with BayStar Compact Cylinders: HC4645H, HC4647H, HC4648H & HC4658H.Includes: 1 Wiper1 Shaft Seal1 O-Ring4 BHCS 1/4" NC x 1.5" SS1 Gland, Port Side1 Gland, Starboard Side1 Pivot plate1 Pivot plate
Seastar Hp4601 Baystar Orb Gland / Seal Kit For Outboard Cylinder - Hp4601 - 1-Hp4601F1
Gland/Seal kit
Seastar Hp5607 Baystar Gland / Seal Kit For Outboard Cylinder, Port Side - Hp5607 - 1-Hp5607F1
Complete assembled end gland with replacement retaining wire.
Seastar Hp5608 Baystar Gland / Seal Kit For Outboard Cylinder, Starboard Side - Hp5608 - 1-Hp5608F1
Complete assembled end gland with replacement retaining wire.
Seastar Hp6003 Ball Joint For Tie Bar | 1/2" Sst - Hp6003 - 1-Hp6003F1
SeaStar HP6003 Ball Joint for Tie Bar | 1/2" SST.
Seastar Hp6016 Support Rod For Front Mount & Outboard Cylinders - Hp6016 - 1-Hp6016F1
SeaStar HP6016 Support Rod for Front Mount & Outboard Cylinders.
Seastar Hp6031 Mounting Hardware & Slide Plate For Outboard Cylinder - Hp6031 - 1-Hp6031F1
SeaStar HP6031 Mounting Hardware & Slide Plate for Outboard Cylinder.
Seastar Hp6032 Seal Kit - Fits Most Seastar, Seastar Pro, Baystar & Baystar Plus Models - Hp6032 - 1-Hp6032F1
Service Kit For Newer Style Baystar Helms
Seastar Hp6033 Mounting Hardware For Outboard Pivot Plate Cylinder - Hp6033 - 1-Hp6033F1
SeaStar HP6033 Mounting Hardware for Outboard Pivot Plate Cylinder.
Seastar Hp6033 Pivot Cylinder Mounting Hardware Kit - Hp6036 - 1-Hp6036F1
Pivot cylinder mounting hardware kit for outboard front mount cylinder
Seastar Hp6044 Bleed Nipple Caps For All Seastar Cylinders, 12/Bag - Hp6044 - 1-Hp6044F1
Bleed nipple caps for all Seastar Cylinders
Seastar Hp6050 Support Rod For Baystar Cylinder, 2/Bag - Hp6050 - 1-Hp6050F1
Support rod for Baystar Cyliner only
Seastar Hp6148 Helm Adapter Kit For Power Purge Jr. - Hp6148 - 1-Hp6148F1
Helm Adapter Kit for Power Purge Jr.
Seastar Hs5147 Service Kit | Fits Older Baystar Helms Hh4016 & Hh4015 | Includes Plastic Housing - Hs5147 - 1-Hs5147F1
Seal Kit For Older Style Baystar Helm
Seastar Hs5151 Seal Kit - Fits 1984 - 1990 Helms - Hs5151 - 1-Hs5151F1
SeaStar HS5151 Seal Kit - Fits 1984 - 1990 Helms.
Seastar Hs5161 Seal Kit - Fits Select Capilano Helm Pumps - Hs5161 - 1-Hs5161F1
Seal Kit
Seastar Ht4420H Baystar 20' Tubing Kit | Includes 2 Pieces Per Kit - Ht4420H - 1-Ht4420Hf1
Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)
Seastar Ht4430H Baystar 30' Tubing Kit - Includes 2 Pieces Per Kit - Ht4430H - 1-Ht4430Hf1
Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)
Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6116 - 1-Ho6116F1
Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.
Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6122 - 1-Ho6122F1
Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.
Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6128 - 1-Ho6128F1
Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.
Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6134 - 1-Ho6134F1
Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.
Seastar Nut, Adjusting For All Front Mount O/B Cylinders - Hp6034 - 1-Hp6034F1
Adjusting Nut for all front mount O/B Cylinders
Seastar Power Purge Service Kit - Hp6125 - 1-Hp6125F1
Power Purge Service Kit
Seastar Pro Front Pivot Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hs5157 Seal Kit - Hc6345-3 - 1-Hc63453F1
The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Systems require the use of a SeaStar Pro helm and reinforced Kevlar hoses only(1500 psi).All cylinders ending in "3" have been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Pro® Hk7500A3 Hydraulic Steering Kit Without Hose - Hk7500-4 - 1-Hk75004F1
Seastar Pro Hydraulic Steering Kit without Hoses. For high performance applications up to 350HP including bass boats and other performance boats capable of speeds in excess of 65 MPH. Suitable for use with high-performance propellers and jack plates. Low friction hydraulic steering systemStandard 3/4" tapered steering shaft4.25 turns lock-to-lockCompact helm with a 4-7/16" footprint, needs only 3" dash holePackaged with: HH57703 SeaStar PRO 2.0 Front Mount Helm, HC63453 Front Mount Cylinder,HA5430 (2) - SeaStar Oil (Quart), Instructions
Seastar Quick Connect Hose Ends - Hp6170 - 1-Hp6170F1
Quick Connect Hose Ends
Seastar Smartstick Raymarine Rudder Reference Unit - Ar4502Rm - 1-Ar4502Rmf1
SmartStick is a non-contact autopilot position sensor that mounts to outboard front mount cylinders. For Raymarine autopilots.
Seastar Solutions 022328 Clutch Detent Kit - 22328 - 1-022328F1
Clutch Detent Kit
Seastar Solutions 039489002 In Series Dual Station Kit - 30 Series - 039489-002 - 1-039489002F1
In Series dual station kit - 30 series(2 required for twin control)
Seastar Solutions 047307 Neutral Safety Switch Kit For S Controls - 47307 - 1-047307F1
Neutral Safety Switch Kit for S Controls
Seastar Solutions 051801033 Sl3 Control Neutral Safety Switch - 051801-033 - 1-051801033F1
Neutral Safety Switch for SL-3 Side Mount Controls.
Seastar Solutions 3300 Series Control Cable Assembly - Cc23011 - 1-Cc23011 Superseded By: 1-Ccx63311F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.
Seastar Solutions 3300 Series Control Cable Assembly - Cc23012 - 1-Cc23012 Superseded By: 1-Ccx63312F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.
Seastar Solutions 3300 Series Control Cable Assembly - Cc23013 - 1-Cc23013 Superseded By: 1-Ccx63313F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63306 - 1-Ccx63306F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63307 - 1-Ccx63307F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63308 - 1-Ccx63308F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63309 - 1-Ccx63309F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63310 - 1-Ccx63310F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63311 - 1-Ccx63311F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63312 - 1-Ccx63312F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63313 - 1-Ccx63313F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63314 - 1-Ccx63314F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63315 - 1-Ccx63315F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
