Sea-Dog Line
Sea-Dog Led Flush Mount Courtesy Light, Round, Blue Leds - 401274-1 - 354-4012741F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Line 2224151 Ring Pull, Cast Brass, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222415-1 - 354-2224151F1
Constructed of sand cast brass, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use. Installs with four #4 FH fasteners (not included).
Sea-Dog Line 2270301 Elbow Catch, Black, A:,1-1/8" B:1-5/16", #6 Fh - 227030-1 - 354-2270301F1
Ideal for holding inactive doors shut. Constructed of UV resistant injection molded nylon. Surface mounts with four #6 FH fasteners (not included).
Sea-Dog Line 4201011 Toggle Switch (Spst) - On/Off - 420101-1 - 354-4201011F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Sea-Dog Line 4203901 2 Position On-Off Switch - 420390-1 - 354-4203901F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4203905 2 Position On-Off Switch, 25 Pieces In A Fishbowl Display - 420390-5 - 354-4203905F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4267101 Screw Terminal Buss Bar, 5 Terminals - 426710-1 - 354-4267101F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 4267111 Screw Terminal Buss Bar, 10 Terminals - 426711-1 - 354-4267111F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 916001Inl "The Inland Spinner" Display - 916001-Inl - 354-916001Inlf1
Focus is on Freshwater or Inland Boating. 168 SKUs Merchandisers are available complete with product, back tags, sign, display panel and peg hooks completely set up in a box. A planagram version (P) without plastic panel and peg hooks may also be ordered at a lower cost. Panel dimensions are 16" x 24", 2 panels per side plus 4" for header card. Panels fit Sea-Dog® spinners. Spinner Base with Casters sold separately.
Sea-Dog Outboard Motor Safety Cable - 371599-1 - 354-3715991F1
Vinyl coated galvanized steel wire.Comes complete with Sea Dog #156060 snap hook.
Sea-Dog Utility Cordage, 1/8" X 50' - 303303050Wh-1 - 354-303303050Wh1F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 3/16" X 50' - 303305050-1 - 354-3033050501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 5/32" X 50' - 303304050-1 - 354-3033040501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 1/2" - 181112 - 354-181112F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 3/8" - 181110 - 354-181110F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 5/8" - 181116 - 354-181116F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Ss Midget Vent, 1-5/8" - 331360-1 - 354-3313601F1
Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Dog Xxx Ss Midget Vent, 2-1/4" - 331370-1 - 354-3313701F1
Stainless steel midget clam shell vents Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog 002050 Cleamcleat® Marine Grade Nylon Rope Cleat | Major Model - 002050-1 - 354-0020501F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Seadog 0411151 Oval Folding Cleat W/ Hidden Hex Bolts, Polished Ss - 041115-1 - 354-0411151F1
This Oval Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. Incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 1/2" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Includes two 1/4"-20 x 2" hex bolts w/washers & nuts.
Seadog 041115B1 Oval Folding Cleat W/ Hidden Hex Boltsblack Powder Coated - 041115B-1 - 354-041115B1F1
This Oval Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. Incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 1/2" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Includes two 1/4"-20 x 2" hex bolts w/washers & nuts.
Seadog 0411251 Oval Folding Cleat, Polished Ss - 041125-1 - 354-0411251F1
This Oval Folding Cleat incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 1/2" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Surface mounted: no cut-outs or hole saws required. Installs with two 1/4"-20 thru bolts (not included).
Seadog 041125B1 Oval Folding Cleat, Black Powder Coated - 041125B-1 - 354-041125B1F1
This Oval Folding Cleat incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 1/2" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Surface mounted: no cut-outs or hole saws required. Installs with two 1/4"-20 thru bolts (not included).
Seadog 0411351 Rectangular Folding Cleat W/ Hidden Hex Bolts, 4-1/2" - 041135-1 - 354-0411351F1
This Rectangular Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. Incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 1/2" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Includes two 1/4"-20 x 2" hex bolts w/ washers & nuts.
Seadog 041135B1 Rectangular Folding Cleat W/ Hidden Hex Bolts, 4-1/2" - 041135B-1 - 354-041135B1F1
This Rectangular Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. Incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 1/2" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Includes two 1/4"-20 x 2" hex bolts w/ washers & nuts.
Seadog 0411361 Rectangular Folding Cleat W/ Hidden Hex Bolts, 6" - 041136-1 - 354-0411361F1
This Rectangular Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. Incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up to 5/8" line. Low profile design makes for smooth, sleek appearance when closed limiting trip hazards. Constructed of corrosion resistant investment cast 316 stainless steel. Includes two 5/16"-18 x 2" hex bolts w/washers and nuts.
Seadog 041304 S Style Pull Up Cleat - 316 Cast Stainless Steel - 041304-1 - 354-0413041F1
These corrosion resistant 316 stainless steel pull-up cleats recess flush to the deck. Newly designed 'S' style for an attractive contemporary look. The stud mounted fasteners are hidden and will accept optional drain fittings for water drainage to bilge. Includes backing plate.
Seadog 041404 Folding Stud Mount Cleat | Investment Cast 316 Stainless Steel - 041404-1 - 354-0414041F1
Highly polished cast 316 stainless fold-down cleats lock down when not in use and flip back up when it's time to tie off. Surface mount means there are no drain tubes or receptacles required to prevent leaks. Installation is easy with two standard bit size holes drilled for the studs, no cut-outs or hole saws required. The stud mounted fasteners are hidden for an attractive, flush appearance.
Seadog 0414241 Pull-Up Cleat, 5" - 041424-1 - 354-0414241F1
These corrosion resistant 316 stainless steel pull-up cleats recess flush to the deck for an attractive contemporary look. The stud mounted fasteners are hidden and will accept optional drain fittings for water drainage to bilge. Includes backing plate.
Seadog 041428 Pull-Up Cleat, 8-1/2" - 41428 - 354-041428F1
These corrosion resistant 316 stainless steel pull-up cleats recess flush to the deck for an attractive contemporary look. The stud mounted fasteners are hidden and will accept optional drain fittings for water drainage to bilge. Backing plates for bulk cleats sold separately.
Seadog 0433401 Heavy Duty Nylon Cleat, Black, 1 Pr. - 043340-1 - 354-0433401F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
Seadog 0433421 Heavy Duty Nylon Cleat, Flat Dark Earth, 1 Pr. - 043342-1 - 354-0433421F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
Seadog 0433601 Heavy Duty Nylon Cleat, Black, 1 Pr. - 043360-1 - 354-0433601F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
Seadog 0433621 Heavy Duty Nylon Cleat, Flat Dark Earth, 1 Pr. - 043362-1 - 354-0433621F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
Seadog 0433801 Heavy Duty Nylon Cleat, Black - 043380-1 - 354-0433801F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
Seadog 0433821 Heavy Duty Nylon Cleat, Flat Dark Earth - 043382-1 - 354-0433821F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
Seadog 044206 Open Base Chrome Zinc Stud Mount 6" Cleat - 44206 - 354-044206F1
Die cast chrome plated zinc stud-mount cleats feature attractive, traditional styling. Installation is easy with two standard bit size holes drilled for the studs, no cut-outs or hole saws required. The stud mounted fasteners are hidden leaving no exposed fasteners to collect water or debris. Galvanized studs, washers and nuts included for clean looking installation. Interchangeable with legacy Perko® style 1210 cleats. Recommended for freshwater applications.
Seadog 060065 Skene Chocks - 316 Stainless Steel - 060065-1 - 354-0600651F1
Investment cast 316 stainless skene bow chocks provide a smooth lead for your mooring or dock lines minimizing chafe. The tips of the chocks are designed to overlap preventing the motion of the boat accidentally working the line free from the chock. Left and right skene chocks included. Installs with two FH fasteners (not included). Accommodates lines up to 3/4".
Seadog 060210 Stainless Straight 6" Chock - 316 Stainless Steel - 060210-1 - 354-0602101F1
316 stainless steel straight 6" chock.
Seadog 088623 Diamond Eye Plate | Cast 316 Stainless Steel | 1/4" Fastener - 88623 - 354-088623F1
Made from investment cast 316 stainless steel these corrosion resistant diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside your boat. Use diamond eye plates to secure fenders, cargo net, etc. Installs with four 1/4" FH fasteners (not included).
Seadog 0P273011 Replacement Screw For Deck Hinges - 0P27301-1 - 354-0P273011F1
Screw for 273160 & 273291
Seadog 0P276011 Screw For 2761601, 2762001 & 2762501 - 0P27601-1 - 354-0P276011F1
Screw for 2761601, 2762001 & 2762501
Seadog 1361201 Bronze Fast Eye Snap, Size 0 - 136120-1 - 354-1361201F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of marine grade die cast manganese bronze, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines and tow ropes. Finish: Bronze
Seadog 1461201 Fast Eye Boat Snap, Stainless, Size 0 - 146120-1 - 354-1461201F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes.
Seadog 1461221 Fast Eye Boat Snap, Stainless, Size 2 - 146122-1 - 354-1461221F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes.
Seadog 1461231 Fast Eye Boat Snap, Stainless, Size 3 - 146123-1 - 354-1461231F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes.
Seadog 1463001 Stainless Steel Safety Snap, 3-15/16" - 146300-1 - 354-1463001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability the safety snap hook is ideal for a variety of marine applications. Superior breaking strength and a fast eye detail that provides secure line attachment make these snaps suitable for safety harnesses, fishing lines and mooring buoy lines.
Seadog 146305 Fast Eye Safety Snap Hook | 11.900 Lb Capacity | 1/8" Diameter - 146305 - 354-146305 Superseded By: 354-1463051F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability the safety snap hook is ideal for a variety of marine applications. Superior breaking strength and a fast eye detail that provides secure line attachment make these snaps suitable for safety harnesses, fishing lines and mooring buoy lines.
Seadog 1463051 Fast Eye Safety Snap Hook | 11.900 Lb Capacity | 1/8" Diameter - 146305-1 - 354-1463051F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability the safety snap hook is ideal for a variety of marine applications. Superior breaking strength and a fast eye detail that provides secure line attachment make these snaps suitable for safety harnesses, fishing lines and mooring buoy lines.
Seadog 1463331 Bull Nose Swivel Snap | Cast 316 Stainless Steel | 1" Diameter - 146333-1 - 354-1463331F1
This bull nose snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel for corrosion resistance and durability they are designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling.
Seadog 147054 3/16" Stainless Steel Bow Shackle, Bulk, A:1/8", B: 5/16", C:1/2", D:13/16" - 147054 - 354-147054F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 147056 1/4" Stainless Steel Bow Shackle, Bulk, A:1/4" , B: 1/2", C:13/16", D: 13/16" - 147056 - 354-147056F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 1470561 1/4" Stainless Steel Bow Shackle, Carded, A:1/4" , B: 1/2", C:13/16", D: 13/16" - 147056-1 - 354-1470561F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 147058 5/16" Stainless Steel Bow Shackle, Bulk, A:5/16", B:11/16", C:1-1/8", D:1-7/16" - 147058 - 354-147058F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 1470581 5/16" Stainless Steel Bow Shackle, Carded, A:5/16", B:11/16", C:1-1/8", D:1-7/16" - 147058-1 - 354-1470581F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 147060 3/8" Stainless Steel Bow Shackle, Bulk, A:3/8", B:7/8", C: 1-7/16", D:1-3/4" - 147060 - 354-147060F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 1470601 3/8" Stainless Steel Bow Shackle, Carded, A:3/8", B:7/8", C: 1-7/16", D:1-3/4" - 147060-1 - 354-1470601F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 1470621 1/2" Stainless Steel Bow Shackle, Bulk A:7/16" , B:1", C:1-5/8" , D:2-1/16" - 147062-1 - 354-1470621F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Seadog 147104 Stainless Steel "D" Shackle, 3/16" - 147104 - 354-147104F1
Constructed of forged 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bi-directional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending.
Seadog 147106 Stainless Steel "D" Shackle, 1/4" - 147106 - 354-147106F1
Constructed of forged 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bi-directional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending.
Seadog 147108 Stainless Steel "D" Shackle, 5/16" - 147108 - 354-147108F1
Constructed of forged 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bi-directional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending.
Seadog 147110 Stainless Steel "D" Shackle, 3/8" - 147110 - 354-147110F1
Constructed of forged 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bi-directional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending.
Seadog 147203 Stainless Steel Bow Shackle, 5/32" Pin - 147203 - 354-147203F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications.
Seadog 147206 Stainless Steel Bow Shackle, 1/4" Pin - 147206 - 354-147206F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications.
Seadog 147208 Stainless Steel Bow Shackle, 5/16" Pin - 147208 - 354-147208F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications.
Seadog 147210 Stainless Steel Bow Shackle, 3/8" Pin - 147210 - 354-147210F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications.
Seadog 147212 Stainless Steel Bow Shackle, 7/16" Pin - 147212 - 354-147212F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications.
Seadog 150088 Locking Asymmetrical Snap & Eye Insert, 316 Stainless Steel, 3-1/8" - 150088 - 354-150088F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. The barrel locking gate locks automatically when released, greatly reducing the possibility of accidental opening. Locking cylinder also reduces wear on the rope and allows for one-handed operation. Formed 316 stainless steel.
Seadog 150108 Locking Asymmetrical Snap & Eye Insert, 316 Stainless Steel, 4" - 150108 - 354-150108F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. The barrel locking gate locks automatically when released, greatly reducing the possibility of accidental opening. Locking cylinder also reduces wear on the rope and allows for one-handed operation. Formed 316 stainless steel.
Seadog 150128 Locking Asymmetrical Snap & Eye Insert, 316 Stainless Steel, 4-3/4" - 150128 - 354-150128F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. The barrel locking gate locks automatically when released, greatly reducing the possibility of accidental opening. Locking cylinder also reduces wear on the rope and allows for one-handed operation. Formed 316 stainless steel.
Seadog 1510601 Aisi 316 Stainless Steel 2-3/8" Snap Hook - 151060-1 - 354-1510601F1
These snap hooks feature a key-lock connection for added security. Spring-loaded closure enables quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging and anchoring applications. For use with ropes, chains, straps and small diameter cable.
Seadog 1510801 Aisi 316 Stainless Steel 3-1/8" Snap Hook - 151080-1 - 354-1510801F1
These snap hooks feature a key-lock connection for added security. Spring-loaded closure enables quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging and anchoring applications. For use with ropes, chains, straps and small diameter cable.
Seadog 1511001 Aisi 316 Stainless Steel 4" Snap Hook - 151100-1 - 354-1511001F1
These snap hooks feature a key-lock connection for added security. Spring-loaded closure enables quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging and anchoring applications. For use with ropes, chains, straps and small diameter cable.
Seadog 151120 Aisi 316 Stainless Steel 4-3/4" Snap Hook - 151120 - 354-151120F1
These snap hooks feature a key-lock connection for added security. Spring-loaded closure enables quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging and anchoring applications. For use with ropes, chains, straps and small diameter cable.
Seadog 151160 Aisi 316 Stainless Steel 6-5/16" Snap Hook - 151160 - 354-151160F1
These snap hooks feature a key-lock connection for added security. Spring-loaded closure enables quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging and anchoring applications. For use with ropes, chains, straps and small diameter cable.
Seadog 153010 Quick Link 3-1/2" | Aisi 316 Stainless Steel | 19,800 Lb Capacity - 153010-1 - 354-1530101F1
Stainless steel quick link with 19,800 lb capacity.
Seadog 1542701 2-3/4" Spring Gate Snap Hook, Ss - 154270-1 - 354-1542701F1
The spring gate snap hook features a quick connect wire lever gate and torsion spring. Constructed of marine grade 316 stainless steel for maximum corrosion resistance and durability. Simple to release lobster clasp style hook makes them ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging.
Seadog 1543001 3-15/16" Spring Gate Snap Hook, Ss - 154300-1 - 354-1543001F1
The spring gate snap hook features a quick connect wire lever gate and torsion spring. Constructed of marine grade 316 stainless steel for maximum corrosion resistance and durability. Simple to release lobster clasp style hook makes them ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging.
Seadog 155500 Spring Gate 4" Asymmetrical Snap Hook - 155500-1 - 354-1555001F1
Features a quick-connect, wire lever gate and torsion spring. Simple to release lobster-style clasp ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging. Constructed of corrosion resistant investment cast 316 stainless steel.
Seadog 170002 Heavy Duty 1/16" Diameter Thimble - Stamped 304 Stainless Steel - 170002 - 354-170002F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170003 Heavy Duty 1/8" Diameter Thimble - Stamped 304 Stainless Steel - 170003 - 354-170003F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170004 Heavy Duty 5/32" Diameter Thimble - Stamped 304 Stainless Steel - 170004 - 354-170004F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170005 Heavy Duty 3/16" Diameter Thimble - Stamped 304 Stainless Steel - 170005 - 354-170005F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170006 Heavy Duty 1/4" Diameter Thimble - Stamped 304 Stainless Steel - 170006 - 354-170006F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170008 Heavy Duty 5/16" Diameter Thimble - Stamped 304 Stainless Steel - 170008 - 354-170008F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170009 Heavy Duty 3/8" Diameter Thimble - Stamped 304 Stainless Steel - 170009 - 354-170009F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170010 Heavy Duty 7/16" Diameter Thimble - Stamped 304 Stainless Steel - 170010 - 354-170010F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170012 Heavy Duty 1/2" Diameter Thimble - Stamped 304 Stainless Steel - 170012 - 354-170012F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170016 Heavy Duty 5/8" Diameter Thimble - Stamped 304 Stainless Steel - 170016 - 354-170016F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170020 Heavy Duty 3/4" Diameter Thimble - Stamped 304 Stainless Steel - 170020 - 354-170020F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 170028 Heavy Duty 1-1/8" Diameter Thimble | Stamped 304 Stainless Steel - 170028 - 354-170028F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these heavy duty thimbles are ideal for lines and running rigging. Stamped 304 Stainless Steel.
Seadog 172010 Galvanized Wire Rope Thimble, 3/8", Bulk - 172010 - 354-172010F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of hot dipped galvanized stamped steel these thimbles are ideal for anchor and mooring lines.
Seadog 172012 Galvanized Wire Rope Thimble, 1/2", Bulk - 172012 - 354-172012F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of hot dipped galvanized stamped steel these thimbles are ideal for anchor and mooring lines.
Seadog 172016 Galvanized Wire Rope Thimble, 5/8", Bulk - 172016 - 354-172016F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of hot dipped galvanized stamped steel these thimbles are ideal for anchor and mooring lines.
Seadog 172019 Galvanized Wire Rope Thimble, 3/4", Bulk - 172019 - 354-172019F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of hot dipped galvanized stamped steel these thimbles are ideal for anchor and mooring lines.
Seadog 182106 Investment Cast 316 Stainless Steel 2-9/16" Eye & Eye Swivel - 182106 - 354-182106F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel. These eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
