Sea-Dog Line
Seadog 321800 Chain Deck Pipe, Stainless - 321800 - 354-321800F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Seadog 322070 Forged Brass Chrome Plated Chain Deck Pipe With Chain - #8 Fastener - 322070 - 354-322070F1
These Chain Deck Pipes facilitate the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. Chrome plated forged brass construction. Oval deck pipe opening can accommodate a large thimble and line up to 1" in diameter plus the shackle and chain. Chain can remain in slot when the cover is closed. Installs with four #8 FH fasteners (not included).
Seadog 322075 Stainless Replacement Cap & Chain - 322075-1 - 354-3220751F1
Replacement Cap & Chain
Seadog 322080 Die Cast Brass Chrome Plated Hinged Chain Deck Pipe - #8 Fastener - 322080-1 - 354-3220801F1
Die cast hinged chain pipe with chrome finish. Use #8FH fasteners.
Seadog 322150 Anchor Chock - Fits 5 To 20 Lb Anchors - #10 Fastener - 322150-1 - 354-3221501F1
Anchor Chocks help protect the surface of your deck in rough seas or while the boat is underway. Secures the anchor when not in use while still maintaining easy access. Constructed of investment cast 316 stainless steel for durability and corrosion resistance. For use with conventional fluke anchors from 5-20 lbs. Deck mounts with four #10 FH fasteners (not included).
Seadog 322620 Sand Cast Brass Chrome Plated Folding Step | #12 Fastener - 322620-1 - 354-3226201F1
Sand cast brass folding step with chrome plated finish. Use #12 fastener.
Seadog 3250321 Triple Threat™ Three Pole Rod Holder, White - 325032-1 - 354-3250321F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250331 Triple Threat™ Three Pole Rod Holder, Black - 325033-1 - 354-3250331F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250341 Triple Threat™ Three Pole Rod Holder, Flat Dark Earth - 325034-1 - 354-3250341F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3251201 Side Mount Rod Holder, Black - 325120-1 - 354-3251201F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251211 Side Mount Rod Holder, White - 325121-1 - 354-3251211F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251231 Side Mount Rod Holder, Flat Dark Earth - 325123-1 - 354-3251231F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 325150 Side Mount Rod Holder - Formed 316 Stainless Steel - #8 Fastener - 325150-1 - 354-3251501F1
Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8" in diameter. Installs with four #8 RH fasteners (not included).
Seadog 3251601 Plastic Flush Mount Rod Holder, Black - 325160-1 - 354-3251601F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 325161 Plastic Flush Mount Rod Holder, Flat Dark Earth - 325166-1 - 354-325161F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251811 Led Rgb Rod Holder - 325181-3 - 354-3251811F1
These LED RGB Rod Holders have translucent tube inserts with bright RGB LEDs. Constructed of investment cast 316 stainless. Patented. Add multiple LED RGB rod holders with optional terminal block (4266241). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes.
Seadog 3251881 Led Rgb Rod Holder Cap Light - 325188-1 - 354-3251881F1
LED RGB Rod Holder Cap attaches on the bottom of any 2" diameter rod holder. Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Patented. Add multiple LED RGB Rod Holder Caps with optional terminal block (4266241).
Seadog 3251891 Led Rgb Rod Holder Tube Insert Only - 325189-1 - 354-3251891F1
Retrofit your existing Rod Holder with the LED RGB Tube Insert (11"). Just remove your existing liner, install the LED RGB Tube Insert and cut to your mounting face angle. Patented. Add to multiple rod holders with optional terminal block (4266241). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes.
Seadog 325190 Side Mount 9" Rod Holder | Formed 316 Stainless | #10 Fastener - 325190-1 - 354-3251901F1
Side Mount Rod Holder slides in and out of mounting plate for a lower profile with not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16". Installs with four #10 FH fasteners (not included).
Seadog 325235 Flush Mount Rod Holder & Cap, Investment Cast 316 Stainless - 325235-1 - 354-3252351F1
The unique design of the cast stainless mounting flange accommodates a gasket reducing leakage common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included). This new design has the same liner and cap that is used on the stamped stainless steel rod holder (325175).
Seadog 3254121 Triple Threat™ Rod Holder - Surface Mount, Black - 325412-1 - 354-3254121F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. Comes supplied with a surface mount base designed to be fastened directly to the boat. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon. Fasteners not included.
Seadog 3254161 Triple Threat™ Rod Holder - Track Mount, Black - 325416-1 - 354-3254161F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon.
Seadog 3254251 Triple Threat™ Rod Holder - Track Mount W/ Extension, Black - 325425-1 - 354-3254251F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The addition of our 6" extension gives you more room in the cockpit and clearance for pedal drives. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. Constructed of injection molded glass filled nylon. The rod holder is interchangeable with either surface mount or track mount bases.
Seadog 3265853 Fillet & Prep Table - 326585-3 - 354-3265853F1
Solid one piece construction for long lifeUV stabilized high-density polyethylene
Seadog 326599 Fillet Table Rail Mount Adapter Plate With Hardware | 1/4" Fastener - 326599-1 - 354-3265991F1
Fillet table rail mount adapter plate with hardware. Use 1/4" fastener.
Seadog 327130 Rail Mount Ring Buoy Bracket - Fits 7/8" Or 1" Tubing Or Direct Mount - 327130-1 - 354-3271301F1
The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
Seadog 327175 Rail Mount 9" Rod Holder | Fits 7/8" To 1" Tubing - 327175-1 - 354-3271751F1
Rail mount 9" rod holder designed with a front mount adjustment screw. Allows for easy adjustment without having to disassemble the rail mount brackets. A safety line on the rod and or reel is recommended when using rail mount rod holders.
Seadog 327199 Removable Rail Mount Clamps | Fit 3/4" To 1-1/4" Tubing - 327199-1 - 354-3271991F1
Removable Round Rail Mount Clamps include shims, thumb screws, and all mounting hardware. Great to retrofit your existing rails to mount a wide variety of items including fillet tables, solar panels, GPS, cell phone holders, cup holders, binocular racks, etc. Clamps fit 3/4", 1", and 1-1/4" tubing. UV stabilized injection molded nylon construction with stainless hardware.
Seadog 328051 Platform Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328051 - 354-328051F1
These corrosion resistant stamped 304 stainless steel Platform Bow Rollers are designed to handle most fluke style anchors using a variety of platform or bowsprit mounting options. The flanges hold the flukes of the anchor securely, reducing the risk of damage to the hull. The rubber wheel accommodates rope up to 1" in diameter. Installs with four 3/8" bolts (not included).
Seadog 328052 Unpolished Short Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328052 - 354-328052F1
These corrosion resistant stamped 304 stainless steel Short Bow Rollers make dropping and weighing anchor a breeze. Easy to use, it reduces the risk of damage to the hull or deck. The rubber wheel accommodates rope up to 1" in diameter. Installs with three 3/8" bolts (not included).
Seadog 328053 Unpolished Long Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328053 - 354-328053F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328054 Unpolished Seahook Style Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328054 - 354-328054F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328057 Medium Fairlead Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328057 - 354-328057F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328064 Unpolished Medium Anchor Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328064 - 354-328064F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328068 Pivoting Medium Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328068 - 354-328068F1
These corrosion resistant stamped 304 stainless steel Pivoting Medium Bow Rollers are designed to create a self-launching anchor system. As the anchor line is played out, the anchor roller pivots downward under the weight of the anchor, allowing it to fall freely into the water. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328074 Large Anchor Bow Roller | 1-1/2" Max Rope Diameter - 328074 - 354-328074F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328076 Large Platform Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328076 - 354-328076F1
These corrosion resistant stamped 304 stainless steel Large Platform Bow Rollers are designed to handle most fluke style anchors and mount in or under the anchor slot of a platform or bow plank. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with six 3/8" bolts (not included).
Seadog 328079 Large Anchor Bow Roller 328074 Replacement Wheel - 5 Pieces Per Pack - 328079-1 - 354-3280791F1
Replacement wheel for large anchor bow roller.
Seadog 328112 Adjustable 17" Bow Form Flagpole - 328112-1 - 354-3281121F1
Highly polished, heavy wall stainless steel tubing with injection molded nylon and polypropylene fittings. The flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips allowing mounting flexibility for a variety of flag or pennant sizes. Maximum safe speed 10 MPH.
Seadog 329100 White Adjustable Antenna Base - 1/4" Fastener - 329100-1 - 354-3291001F1
Injection molded UV stabilized nylon construction with dual swiveling mounts for full adjustability. Designed to feed the antenna wire directly through the base eliminating the need for a separate cable outlet, reducing potential areas for water leakage. The control knob allows for quick and easy adjustment diminishing the potential of mooring, fishing or other lines getting fouled on a handle. Accepts any standard antenna with 1" - #14 threads. Installs with four 1/4 FH fasteners (not included).
Seadog 329532 Stainless Antenna Extension, 12" - 329532-1 - 354-3295321F1
Machined 304 stainless steel antenna base extension mast. Features standard 1"-14 thread. Male and female fittings. One section.
Seadog 329536 Stainless Antenna Extension, 24" - 329536-1 - 354-3295361F1
Machined 304 stainless steel antenna base extension mast. Features standard 1"-14 thread. Male and female fittings. One section.
Seadog 331320 Cowl Vent With Base - Uses 3" Hose - #8 Fastener - 331320-1 - 354-3313201F1
Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3" ventilation hose. Installs with four #8 FH fasteners (not included).
Seadog 3313801 Louvered Vent, 2-5/8" H X 5" W - 331380-1 - 354-3313801F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313901 Louvered Vent, 5" H X 4-5/8" W - 331390-1 - 354-3313901F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314001 Louvered Vent, 9-1/8" H X 4-5/8" W - 331400-1 - 354-3314001F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314051 Oval Louvered Vent, Stainless Steel - 331405-1 - 354-3314051F1
Oval Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.94 sq in.
Seadog 3314101 Louvered Vent, 9" H X 5" W - 331410-1 - 354-3314101F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 335680 Adjustable Bronze Deck Plate Key - 6" Max Opening - 335680-1 - 354-3356801F1
Opens to a max of 6" and comes with two sizes of stainless steel pins 3/16" and 5/16" allowing it to fit most plates or caps. Satin finished bronze. Heavy duty constructionGreat addition to every tool boxCorrosion resistant
Seadog 3361401, Smooth Finish Quarter-Turn Deck Plate,White,, A:4-1/2" , B:6-1/8", C:4-1/2", D:5-3/8 - 336140-1 - 354-3361401F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361501 Smooth Finish Quarter-Turn Deck Plate, White,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336150-1 - 354-3361501F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361521 Smooth Finish Quarter-Turn Deck Plate, White, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336152-1 - 354-3361521F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361551 Smooth Finish Quarter-Turn Deck Plate, Black, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336155-1 - 354-3361551F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361571 Smooth Finish Quarter-Turn Deck Plate, Black,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336157-1 - 354-3361571F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361651 Smooth Finish Quarter-Turn Deck Plate, Black,A:6-1/2" , B:8-1/8", C:6-1/2", D:7-3/8" - 336165-1 - 354-3361651F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 337315 Hose Thru Vent, 3" White - 337315 - 354-337315F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337325 Hose Thru Vent, 3" Black - 337325 - 354-337325F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337415 Hose Thru Vent, 4" White - 337415 - 354-337415F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337425 Hose Thru Vent, 4" Black - 337425 - 354-337425F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 3400201 Deck Drain 4-3/16" Black Abs - 340020-1 - 354-3400201F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400211 Deck Drain 4-3/16" White Abs - 340021-1 - 354-3400211F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400401 Deck Drain 5-5/8" Black Abs - 340040-1 - 354-3400401F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 340041 Deck Drain 5-5/8" White Abs - 340041 - 354-340041F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 351300 Hose Deck Fill Body Without Cap, 1-1/2" Hose Diameter - 351300-1 - 354-3513001F1
316 stainless steel body with black plastic cap. Cap threads are 1-1/4" to 11-1/2 NPSM straight. Use #10 fasteners.
Seadog 3513201 Gas Deck Fill For 1-1/2" Hose - 351320-1 - 354-3513201F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" © 11-1/2 NPSM straight cap threads.
Seadog 351320L Locking Gas Hose Deck Fill W/Keys, 1-1/2" Hose - 351320L-1 - 354-351320L1F1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 351321 Diesel Deck Fill For 1-1/2" Hose - 351321-1 - 354-3513211F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" © 11-1/2 NPSM straight cap threads.
Seadog 351321L1 Locking Diesel Hose Deck Fill W/Keys, 1-1/2" Hose - 351321L-1 - 354-351321L1F1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 3513231 Waste Deck Fill For 1-1/2" Hose - 351323-1 - 354-3513231F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" - 11-1/2 NPSM straight cap threads.
Seadog 351330 Gas Deck Fill A:2" Hose, B:3-1/4", C:3-7/16", #10 Fh, Gas - 351330 - 354-351330F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 2" hose versions are 1-1/2" - 11-1/2 NPSM straight cap threads.
Seadog 351331 Diesel Deck Fill For 2" Hose - 351331 - 354-351331F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 2" hose versions are 1-1/2" - 11-1/2 NPSM straight cap threads.
Seadog 351331L Locking Diesel Hose Deck Fill W/Keys, 2" Hose - 351331L - 354-351331Lf1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 351391 Angled Hose Deck Fill Replacement Cap - 351391-1 - 354-3513911F1
Investment cast 316 stainless angled hose deck fill replacement cap. Cap threads are 1-1/2" to 12 NPSM straight.
Seadog 3520301 90° Gas Tank Vent, Fits 5/8" Hose, Brass - 352030-1 - 354-3520301F1
Compensates for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery. Also doubles as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose at a 90° angle.
Seadog 3522301 90° Gas Tank Vent, Fits 5/8" Hose, Stainless - 352230-1 - 354-3522301F1
Compensates for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery. Also doubles as a pressure release valve for the gas tank. Investment cast 316 stainless steel construction. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose at a 90° angle.
Seadog 3532301 90° Gas Tank Vent, Fits 5/8" Hose, Stainless - 353230-1 - 354-3532301F1
This Flush Mount 90° Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose at a 90° angle. Constructed of corrosion resistant investment cast 316 stainless steel.
Seadog 3570001 Black Nylon Fill Body W/O Cap - 357000-1 - 354-3570001F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570301 Gas Deckfill W/Keyless Cap - 357030-1 - 354-3570301F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570311 Deck Fill - Diesel - 357031-1 - 354-3570311F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 357033 Keyless Deck Fill-Water - 357033 - 354-357033F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570331 Deck Fill -Water - 357033-1 - 354-3570331F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570341 Keyless Deck Fill-Waste - 357034-1 - 354-3570341F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" - 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 371840 Flush Mount Ski Tow | 3/8" Thread Diameter | Investment Cast 316 Stainless - 371840 - 354-371840F1
Flush mount ski tow designed to give your transom an updated look. Stud centers will allow direct replacement of the most popular standard ski tow. Includes backing plate.
Seadog 4000121 Led Fold Down All Around Light, 9" - 400012-1 - 354-4000121F1
LED Fold Down 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 4000131 Led Fold Down All Around Light, 24" - 400013-1 - 354-4000131F1
LED Fold Down 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400022 Led Masthead Light | Uscg 2 Nm Approved | #12 Fastener - 400022-1 - 354-4000221F1
LED 225° Masthead Lights are fixed mounted and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400042 Led All Around Light | Uscg 2 Nm Approved | #12 Rh Fastener - 400042-1 - 354-4000421F1
Fixed mount and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw.
Seadog 400069 Stainless Led Top Mount Side Navigation Light - Uscg 2 Nm Approved - #8 Fastener - 400069-1 - 354-4000691F1
LED Top Mount Side Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). Includes port and starboard lights. Constructed of stamped 304 stainless steel with an investment cast 316 stainless steel base. Installs with four #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400078 Black Led Side Mount Side Navigation Port & Starboard Lights | Uscg 1 Nm Approved | #8 Fastener - 400078-1 - 354-4000781F1
LED Side Mount Lights are approved for USCG 1 NM (Colreg 1 mile).Constructed of corrosion resistant stamped 304 stainless steel or injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400079 Stainless Led Side Mount Side Navigation Port & Starboard Lights | Uscg 2 Nm Approved | #8 Fastener - 400079-1 - 354-4000791F1
LED Side Mount Side Lights are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel or injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400130 Stern Light | 12 Point Light Arc | #4 Fastener | Stamped 304 Stainless - 400130-1 - 354-4001301F1
135° Stern Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400165 Top Mount Red Port & Green Starboard Side Lights - 10 Point Light Arc - 400165 - 354-400165F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog 400180 Flush Mount Port & Starboard Side Lights, Stainless, 1 Pr. - 400180 - 354-400180F1
Flush Mount Side Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with four #8 RH fasteners (not included). Approved for USCG 1 NM (A-16). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 4001901 Stainless Steel Dome Light, 12V With On/Off Switch, 5-1/2" Dia. - 400190-1 - 354-4001901F1
These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Pre-wired with an integral on/off toggle switch. Includes an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.
Seadog 4001931 Led Dome Light, 5-1/2" Dia. - 400193-1 - 354-4001931F1
LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).
Seadog 4002001 Stainless Steel Dome Light, 12V With On/Off Switch, 6-3/4" Dia. - 400200-1 - 354-4002001F1
These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Pre-wired with an integral on/off toggle switch. Includes an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.
Seadog 4002031 Led Dome Light, 6-3/4" Dia. - 400203-1 - 354-4002031F1
LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).
Seadog 400710-3 Led Cabin/Reading Light W/Touch Dimmer - 400710-3 - 354-4007103F1
LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch. This light provides a direct beam reading light, as well as ambient light for the cabin. High quality aluminum construction with an adjustable light angle and a warm white, 3000K Cree bulb providing 270 lumens @ 2W. Works with 12V and 24V systems. Includes two #6 FH fasteners and Allen wrench.
Seadog 4007153 Led Cabin/Reading Light W/Touch Dimmer & Usb Port - 400715-3 - 354-4007153F1
LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch and USB port. This light features an adjustable direct beam reading light, as well as ambient light for the cabin. Warm white LED light with blue accented dimmer switch, 3000K Bridgelux bulb provides 270 lumens @ 3W. USB Port: 5V/2A. Constructed of high quality brushed aluminum. Includes two #6 FH fasteners and Allen wrench. CE, RoHS compliant.
Seadog 401270 Led Flush Mount Round Courtesy Light With Stainless Cover | White Finish - 401270-1 - 354-4012701F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
