Tools
6" Bent Nose Pliers - 1000V Features: Insulated to 1000V Ideal for use in tight spaces Chrome Vanadium Length: 6" (15.2 cm) More Details
6" Diagonal Cutting Pliers - 1000V Features: Insulated to 1000V Ergonomic cutter for wire or cable ties Chrome Vanadium Length: 6" (15.2 cm) More Details
6" Long Nose Pliers - 1000V Features: Insulated to 1000V Ideal for use in tight spaces Chrome Vanadium Length: 6" (15.2 cm) More Details
7-Piece Screwdriver Set with Case Features: Insulated to 1000V Includes convenient storage/carrying case Kit Includes: (1) 1/8" x 3" Slotted (1) 7/32" x 5" Slotted (1) 1/4" x 6" Slotted (1) Test probe... More Details
7" Combination Pliers - 1000V Features: Insulated to 1000V Combines both gripping jaws and wire cutter Chrome Vanadium Length: 7" (17.8 cm) More Details
Flag Terminal Die Set 12-10 Features: Works with all Ancor ratcheting crimpers; 703010, 703015, 703030, 703035 More Details
Flag Terminal Die Set 22-18/16-14 Features: Works with all Ancor ratcheting crimpers; 703010, 703015, 703030, 703035 More Details
Deluxe Rigging Knife Made entirely of top quality stainless steel with dura-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable. Deluxe Rigging Kinfe co... More Details
J1939 Doctor Diagnostic Tool Self-contained J1939 diagnostics tool with physical network and data analysis on your phone, tablet, PC, or MAC. The J1939 protocol is increasingly being adopted in marine... More Details
NAVDoctor NMEA Network Diagnostic Tool NAVDoctor is the perfect NMEA 2000 diagnostic tool for dealers, installers, and boat builders. It turns any mobile device into an NMEA 2000 network analyzer, cre... More Details
Spanner Wrench/Deck Plate Key Features: Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveni... More Details
Thru-Hull Installation Tool Thru Hull Installation Tool The Concept: THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer. Slide the thru-hull fitting, ... More Details
Marine Formula by DeBond Corporation Marine Formula™ 10oz Aerosol
Adhesives/Sealants/Tapes, Tools, Marine Formula by DeBond Corporation
$53.36
Marine Formula™ 10oz Aerosol Marine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remov... More Details
Marine Formula by DeBond Corporation Marine Formula™ 5oz Aerosol
Adhesives/Sealants/Tapes, Tools, Marine Formula by DeBond Corporation
$41.03
Marine Formula™ 5oz Aerosol Marine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remove... More Details
Replacement Blade for Rope Cutter Ideal for boat, camper and home use. Lightweight (1. 5 lbs. ), The handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in ... More Details
Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING:... More Details
Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING:... More Details
Add-A-Snap - Black - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: Thi... More Details
Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING:... More Details
Add-A-Snap - White - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING:... More Details
Add-A-Snap - White - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: Thi... More Details
Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy d... More Details
Emergency Deck Fill Plug Nitrile-Buna Rubber This Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you c... More Details
Plastic Suction Cup Handle Injection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-moun... More Details
Stainless Steel Bottle Opener with Brushed Finish Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included). WARNING: This product can ... More Details
Oetiker Stepless Clamp Kit with Pliers Stepless™ 150-Piece Clamp Rigging Kit by T-H Marine®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-... More Details
Weld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Tools, Weld Mount
$38.35
.75" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the con... More Details
.75" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and secu... More Details
Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Tools, Weld Mount
$46.57
1.25" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the co... More Details
Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15
Tools, Weld Mount
$47.94
1.5" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the con... More Details
1.5" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and secu... More Details
1.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details
Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Tools, Weld Mount
$42.46
1" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the conso... More Details
1" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details
2.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details
2" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details
8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a cl... More Details
Adhesively Bonded Fastener Kit with AT 8040 Adhesive Kit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8040 Adhesive (5) AT-850 Mixing Tip (1) AT-300 Dispens... More Details
Footman's Strap Mount The Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is... More Details
Footman's Strap Mount The Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is... More Details
10:1 Gun Plunger for AT-6030 Adhesive 10 Pack Gun Plunger for AT-6030 Adhesive (sold separately) Accessories SKU 106701 — MFG# AT-9500 More Details
AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - Single Single Pack gun plunger for AT-6030 Adhesive (sold separately). Accessories SKU 48779 — MFG# 80300 SKU 104031 — MFG# 6031 More Details
Weld Mount AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & 6030
Adhesives/Sealants/Tapes, Tools, Weld Mount
$24.65
AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives. (sold separately) More Details
Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minu... More Details
Acrylic Adhesive - 10-Pack CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in ... More Details
AT-3 Small White Nylon Tie Mount - Qty. 500 The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum... More Details
White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". A... More Details
White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". A... More Details
Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020
Adhesives/Sealants/Tapes, Tools, Weld Mount
$120.55
Adhesive Dispensing Gun The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to 1 p... More Details
Weld Mount AT-301 Adhesive Dispensing Gun w/10:1 Plunger f/AT-6030 Adhesive Only
Adhesives/Sealants/Tapes, Tools, Weld Mount
$117.70
Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Opera... More Details
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". A... More Details
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". A... More Details
AT-3B Small Black Nylon Wire Tie Mount - Qty. 500 The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a m... More Details
Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 ... More Details
Acrylic Adhesive - 10-Pack CAN NOT SHIP AIR,UPS GROUND ONLY AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures i... More Details
AT-5 Large White Nylon Tie Mount - Qty. 500 The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has... More Details
White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull ... More Details
White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull ... More Details
Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull ... More Details
Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull ... More Details
AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie a... More Details
AT-6031 Metal Bond Adhesive AT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-60... More Details
AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10 Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requir... More Details
Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with th... More Details
Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with th... More Details
Weld Mount AT-850 Square Mixing Tip f/2010, 4010, & 8040 Adhesive - 4" case of 50
Tools, Weld Mount
$127.40
AT-850 Square Mixing Tip 4" - Case of 50 Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as th... More Details
Weld Mount AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives 4" - Case of 10
Tools, Weld Mount
$28.76
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10 Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility o... More Details
AT-85810 Mixing Tips *10-Pack Its unique design eliminates any possibility of the cartridge plugging up as the entry is separated. This prevents cross-contamination of the two parts, keeping the cart... More Details
Aluminum Wire Tie Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and s... More Details
Aluminum Wire Tie Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and s... More Details
AT-9500 Polybonder Cartridge - 50ml Features: Adhesively bonded fastening systems Plastic Bonder: PP, PE & PTFE 50ml MMA Acrylic Adhesive Made in the U.S.A. Accessories SKU 48779 — MFG# 80300 SKU 5626... More Details
Executive Adhesive & Fastener Kit w/AT-8040 Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Con... More Details
Executive Fastener Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Ac... More Details
No Slide Metal/Composite Bonder Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No W... More Details
No Slide Metal/Composite Bonder *Case of 10* Revolutionary Metal Bonder will hold heavy parts at application without sliding on a vertical or overhead surface. AT-8040 will hold 3,500 lbs in 40 minute... More Details
Retail Wire Tie Kit with AT-8040 Adhesive The AT-1050 kit contains one manual mix tube of AT-8040 adhesive and 25 pieces of AT-5 white wire tie mount. Just enough parts for a small wiring job and an i... More Details
Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 1" OD - Requires 1.75" Stud - Qty. 25
Tools, Weld Mount
$80.82
Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 1/2" OD - Requires 1.5" Stud - Qty. 25
Tools, Weld Mount
$61.64
Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 3/4" OD - Requires 1.75" Stud - Qty. 25
Tools, Weld Mount
$78.08
Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 5/8" OD - Requires 1.5" Stud - Qty. 25
Tools, Weld Mount
$63.01
Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesi... More Details
Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesi... More Details
Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 Pack
Tools, Weld Mount
$272.62
Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are m... More Details
Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.5" Tall - 100 Pack
Tools, Weld Mount
$319.20
Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.5" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mo... More Details
Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1" Tall - 100 Pack
Tools, Weld Mount
$264.40
Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are moun... More Details
Weld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack
Tools, Weld Mount
$93.15
Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the ba... More Details
Weld Mount Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack
Tools, Weld Mount
$386.33
Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile stren... More Details
Weld Mount Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity
Tools, Weld Mount
$42.46
Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that ... More Details
Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts Multiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Bui... More Details
Snap Tool Multi-Key A deck plate with attitude! Handy Universal Stainless Steel Strong Perfect for: Fishing Hiking Climbing Boating Biking Camping Sailing Tailgating RV Documentation BrochureDownload ... More Details
Portable Rope Cutting Gun Panther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy finger pull operation. I... More Details
Sea-Dog Heavy Duty Canvas & Upholstery Scissors - 304 Stainless Steel/Injection Molded Nylon
Deck / Galley, Tools, Sea-Dog
$53.77
Heavy Duty Canvas & Upholstery Scissors - 304 Stainless Steel/Injection Molded Nylon These quality stainless steel Heavy Duty Canvas & Upholstery Scissors are designed with offset handles to allow the... More Details
Multi-Tool with Knife Blade - 304 Stainless Steel This handy Multi-Tool includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file, and saw. Constructed of cor... More Details
Rigging Knife - 304 Stainless Steel This handy Rigging Knife includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener, and a loop to attach a lanyard (not included). Constructed ... More Details
Prop Master Prop Stop Propeller Stop Features: Simple to use Securely holds prop during changing Makes prop-changing safer Brightly colored for greater visibility (Remember to remove propeller stop be... More Details
Prop Master Propeller Wrench The Prop Master™ is the original molded propeller wrench. This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is tot... More Details
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 1" OD - Requires 1.75" Stud - Qty. 25
Tools, Accessories, Weld Mount
$123.29
Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 1/2" OD - Requires 1.5" Stud - Qty. 25
Tools, Accessories, Weld Mount
$87.67
Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/4" OD - Requires 1.75" Stud - Qty. 25
Tools, Accessories, Weld Mount
$120.55
Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/8" OD - Requires 1" Stud - Qty. 25
Tools, Accessories, Weld Mount
$61.64
Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details
Egis Dual XD - NMEA 2000 - ACR/ACR w/Knobs - 8 Position DT
Accessories, Egis Mobile Electric
$411.55
Dual XD - NMEA 2000 - ACR/ACR with Knobs - 8 Position DT Features: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel... More Details
Ventura Series XT60 Solar Connection Need quick and dependable outdoor access to an XT60? Meet the Scanstrut Ventura Series XT60 Solar Connection, your go-to power link for life off the beaten track. ... More Details
Tele-Sun Carbon Fiber Shade Poles with Carry Bag Extend your time on the water and at the sandbar with the new Tele-Sun Shade Poles! Made from strong, lightweight and flexible Carbon Fiber, the Tele-S... More Details
Taylor Made T-Top Bow Shade 7'L x 102"W - Pacific Blue
Biminis/Shades/Umbrellas, Taylor Made
$264.34
T-Top Bow Shade 7'L x 102"W - Pacific Blue Recommended for boats 23'-26' A quick and easy way to gain additional shaded area on your center console boat with a T-Top installed. Constructed from Hot Sh... More Details
Whole Car Air Refresher Odor Eliminator - Summer Breeze Scent Now you can enjoy the refreshing smells of a summer breeze anytime. Meguiar's advanced Re-Fresher technology not only removes unwanted odo... More Details
Grey 18 AWG Primary Wire - 250' Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 18 AWG mari... More Details
Hydraulic Tubing - 10' Hydraulic tubing with 10' coil WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive ... More Details
CPT-S Thru-Hull - High Chirp - Plastic - 0° Connects to the CP100 and/or MFD Series that ends in axx8 or esxx8. CPT-S transducers are strictly high chirp sonar transducers and do not include the downv... More Details
SPDT Sealed Toggle Switch - (ON)/OFF/(ON) Single pole, double throw toggle switch turns one of two circuits on and off. Common applications include intermittent trim tab or windshield wiper control. C... More Details
SS4 4 Bank Battery Charger with 2 Bank B.O.S. This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s Sportsman Series Battery Charger - 40A - 4-10A... More Details
Universal Grab Handle w/Comfort Grip - Black Flexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and compan... More Details
Heavy Texture Roller A high quality 9" x 3/8" foam nap roller for easily and consistently applying GripTide™ Non-Skid Deck Coating. Features: Evenly applies GripTide Non-Skid Deck Coating Results in ... More Details
Universal Remote Control Kit for RCL-100 LED Control an ACR spotlight from any place on a vessel with fingertip control and accuracy This controller can be surface or flush mounted. Compatible With: ... More Details
16-14 Nylon Multi-Stack Disconnects - 3-Pack These multi-stack disconnects are constructed from nylon and insulated for extra protection against sunlight, gasoline, oil and chemicals. Double crimp, fu... More Details
Toilet Concerto Floor Flange Adapter Kit Floor flange adapter for plug in base toilets Specifications: Color - Black Dimensions - Floor Flange Adapter - Overall 7" x (Center 4" OD x 3-1/2" ID) x appr... More Details
160-Piece Heat Shrink Terminals & Connectors Kit Wire management kit including 160 pieces of heat shrink terminals and connectors. Includes: Butt Connectors: (10) 22-18 AWG, (20) 16-14 AWG (10) 12-10 ... More Details
Foam Interface Pad 150mm No Holes 12mm *2-Pack Available in 7mm or 12mm thickness, the Ø 150mm RUPES Foam Interface Pads are designed and manufactured in-house by RUPES and are specially engineered to... More Details
Series 40 High Load Block - Single Features: Exceptionally high working loads Lightweight Cheek cut-outs for easy bearing maintenance Suitable for both rope or wire Captive Lock™ universal head Slotte... More Details
RUPES S245 Portable Vacuum Long Hose Kit w/RH359A Skorpio Sander
Cleaning, Cleaning, RUPES
$2,524.57
S245 Portable Vacuum Long Hose Kit with RH359A Skorpio Sander The special structure of the RUPES Professional 45-liter vacuum cleaner ensures resistance and manageability during movement in all kinds ... More Details
Trident Marine 316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" Range - 10-Pack
Accessories, Accessories, Trident Marine
$200.92
316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" Range - 10-Pack Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) w... More Details
Striker Designed for Muskie, Halibut, Sturgeon and other big game fish. Stainless steel reinforced post, larger opening with easy lock / unlock ring. The inner support rotates with the rod to instantl... More Details
117WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For... More Details
Waste Water Macerator - 43L(11.5GPM) - 24V Macerator Pump 24V equipped with rotary cutter and impeller to discharge waste water with high capacity. Capacity 43 L/min (11,5 GMP) output at 4m total head... More Details
Schmitt Marine Deluxe SS Wiper Blade - 12" - Black Powder Coated
Windshield Wipers, Schmitt Marine
$57.33
Deluxe Stainless Steel Wiper Blade - 12" - Black Powder Coated This deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are pack... More Details
Full Throttle Men's Rapid-Dry Flex-Back Life Jacket - XL - Red/Black
Personal Flotation Devices, Life Vests, Full Throttle
$123.29
Men's Rapid-Dry Flex-Back Life Jacket - XL - Red/Black Features: Designed to meet the performance demands of watersports enthusiasts Stretchable Flex-Back insert provides improved fit, allowing for fr... More Details
C. Sherman Johnson Deck Toggle Turnbuckle to Hand Crimp Terminal f/3/16" Wire
Rigging, C. Sherman Johnson
$53.77
Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" Wire This "T" bolt style fitting is used on decks or bulkheads. T-316 stainless Specifications: 3/16" Wire 1/4"-28 3" adj. More Details
Yellow 16 AWG Tinned Copper Wire - 500' Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) stand... More Details
Standard Horizon Leather Case w/Swivel Belt Clip f/HX400 Handheld VHF
Accessories, Standard Horizon
$109.60
Leather Case with Swivel Belt Clip for HX400 Handheld VHF Standard Horizon's leather case with swivel belt clip specifically for Standard's HX400 Handheld VHF. More Details
Straight Short Cam Bar Features: Zinc Replacement Cam Bar Straight-Short/with Thread Length: 1-7/8" Includes S.S. Set Screw to adjust distance on shaft. Shaft - 3/8" (metric threads) Length is measure... More Details
Bungee Deck Kit Add or replace the bungee system on the deck of a kayak or canoe with the YakGear Deck Kit. Bungees on the deck of a boat add extra storage for more equipment on your adventure. The ki... More Details
Carver Sun-DURA® Styled-to-Fit Boat Cover f/20.5' Sterndrive Deck Boats w/Walk-Thru Windshield - Grey
Winter Covers, Winter Covers, Carver by Covercraft
$837.93
Sun-DURA® Styled-to-Fit Boat Cover for 20.5' Sterndrive Deck Boats with Walk-Thru Windshield - Grey *102" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best se... More Details
14 AWG Yellow Primary Wire - 25' Tinned Copper Stranded Wire. Sea-Dog Marine Wire™ is offered in all gauges and colors for primary marine wire applications. All 18 AWG - 6 AWG wire is designed and man... More Details
Shakespeare's gold-plated Style PL-258-G is useful for joining two PL-259-ended cables together. Joins two PL-259-ended cables together Gold-Plated WARNING: This product can expose you to chemicals in... More Details
Lee's 22' Bright Silver Outrigger Poles - 2" O.D. - Fits OH226S/OH234S Holders
Outriggers, Lee's Tackle
$1,898.83
22' Bright Silver Outrigger Poles - 2" O.D. - Fits OH226S/OH234S Holders 22 ft. 6 Sections with Bright Silver Finish, and Black Spike. Fit the Lee Junior/Wishbone Style Holders with a 1 7/8 in. ID Acc... More Details
Guide Series Worm Wrap Newly redesigned with equal attention to aesthetics and technology, Plano's Guide Series™ tackle bags have never looked or functioned better. The Guide Series™ Worm Wrap is idea... More Details
Pontoon Boat RailMount StarPort 28-32 Get ready to take your Pontoon boat experience to the next level with the amazing Pontoon RailMount StarPort 28-32! This base mount allows you easy and secure att... More Details
Wichard HR D Shackle - 16mm Diameter - 5/8"
Shackles/Rings/Pins, Wichard Marine
$509.38
You save:
$89.89
HR D Shackle - 16mm Diameter - 5/8" Features: Forged D shackle in HR stainless steel grade (17,4 PH) Outstanding working and breaking load An HR shackle can be up to 60% more resistant than a shackle ... More Details
PP5063 PowerPod Precut for Simrad NSS12 Part #: PP5063 NavPod Protects Your Electronics From Harsh Conditions The PP5063 PowerPod is precut specifically for Simrad's NSS12.This product may not be retu... More Details
GT10HN-IF Ice Fishing Transducer The GT10HN-IF ice fishing transducer is perfect for fishermen who want clear definition under the ice with excellent target separation. The narrow, 7-16 degree beam an... More Details
Blue Sea 8361 AC Rotary Switch Panel 65 Ampere 3 Positions + OFF, 3 Pole
Electrical Panels, Blue Sea Systems
$1,220.66
AC Rotary Switch Panel 65 Ampere 3 positions + OFF, 3 Pole Poles: 3 Voltage: 120/240v Amperage: 30 Positions: 3 + OFF Switches 3 - 230 Volt AC sources Includes 9011 heavy duty industrial rated switch ... More Details
Protective Cover for echo&tade; 200, 500c & 550c The protective cover fits snugly over the display of echo 200, 500c and 550c to help protect them when not in use.WARNING: This product can expose you ... More Details
Johnson/Evinrude Outboard Starter - Small 10 Tooth The outboard starter will fit BRP-OMC, 85-140 HP V4, and a small 10-tooth drive gear. ARCO advises using a fully charged battery - A weak battery can... More Details
Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 48" - 1-Pack - Black
Wire Management, Ancor
$32.87
Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 48" - 1-Pack - Black Package of 1 Black 48"(122cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm) Wire Range: 8-4 AWG Features: ... More Details
Davis Long Range Repeater w/Solar Power
Weather Instruments, Davis Instruments
$856.94
You save:
$95.22
Wireless Long-Range Repeater with Solar Power For those who wish to send weather data much farther than 1,000' (300M), the Wireless Long-Range Repeater can extend the range up to two miles (3.2 km). P... More Details
Lopolight Series 200-018 - Double Stacked Navigation Light - 2NM - Vertical Mount - Green - Black Housing
Navigation Lights, Lopolight
$1,112.30
Series 200-018 - Double Stacked Navigation Light - 2NM - Vertical Mount - Green - Black Housing Lopolight started out back in 2004, offering many solutions and neat combinations for all-size boats and... More Details
Hinged Pad Eye- 5/16" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures th... More Details
13.5" CM Mooring Buoy w/SS Iron - White Blue Stripe The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any m... More Details
NMEA2000 Compact Lighting Controller The Shadow-Caster SCM-LCX is a compact and versatile NMEA 2000-connected lighting controller, delivering the full functionality of our original Light Commander in ... More Details
Perko 1" Pipe to Hose Adapter Straight Bronze Cast bronze Cast hex for easier installation Precision machined hose barb Technical Information: Pipe Size Inches: 1 Hose Size Inches: 1 Length Overall In... More Details
HydroWave H2 System Catfish Edition The HydroWave H2 Catfish Edition builds on the success of the original HydroWave and now offers several key new upgrades. Now featuring 9 sound patterns for added v... More Details
Shurhold Buff Magic Compound Surface Reconditioner & Metal Polish - 4LB Jar
Cleaning, Cleaning, Shurhold
$110.52
Buff Magic Compound Surface Reconditioner & Metal Polish - 4LB Jar The ultimate restoration compound! Buff Magic is designed to remove oxidation and surface imperfections, restoring that showroom's sh... More Details
Series 40 Orbit Single Block with Becket & Swivel Head The Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic... More Details
Deutsch DT Receptacle & Wedge Lock Kit - 4 Position - 10 Pack Protecting electrical connections is an absolute must, and Deutsch Connectors are built for just that. DT Kit connectors are designed to c... More Details
Red 18 AWG Primary Wire - 500' Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 18 AWG marin... More Details
Yak Quick 3 Device Connection System The CONNECT-EASE YAK QUIK represents our most simple, yet quick and easy way to send power to your kayak fishing devices/accessories. YAK Quik is a power solution ... More Details
T-Spec V10-D104K 4 Gauge Add-A-Amp Kit f/1/0 Gauge Wire
Accessories, T-Spec
$272.62
You save:
$31.51
V10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge Wire If you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to ... More Details
Superior Hi-Vis Yellow Monofilament - 15lb - 3370 yds Sufix Superior has superior strength, durability, and fast recovery for a high level of performance. Superior mono rated top line by "The Professi... More Details
Chrome Barrel Bolt - 5" Features: Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Elimina... More Details
975 Portable Toilet with Mounting Brackets - 5 Gallon - Grey Powerful flushing at the touch of a button sets the new 970 portable toilet series apart from the rest. Requires no manual pumping or bat... More Details
Ronstan Swivel Shackle - 1/4" Pin - 1-21/32"L x 19/32"W
Shackles/Rings/Pins, Ronstan
$46.18
You save:
$8.15
Swivel Shackle - 1/4" Pin - 1-21/32"L x 19/32"W Features: Coined head pin 6.4mm(1/4") Diameter Pin Grade 316 Stainless Steel bodies and pins More Details
Stanchion Ratchet Block Controlling the Power in Furling lines! This Stanchion Ratchet Block is ideal for removing some of the loadings for the crew when furling in the jib. The ratchet means that the... More Details
Wedge Base Bulb - 12V, 9W, .69A - Pair Specs: Nominal Voltage: 12V Wattage: 9W Amps: .69 Bulb Diameter: 5/8" Bulb Length: 1-1/2" More Details
Harness (12-Pin) for Garmin OnBoard System Use this to replace the power cable and 12-pin engine harness on your GOS 10 Hub for the Garmin OnBoard System. What's In The Box? 12-pin fused power and eng... More Details
1-1/4" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the... More Details
2-3/8" Adjustable Mainstay Package with Locking Swivel Package includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base,... More Details
SEEKR by Caframo Chinook 707 120V AC 2-Speed 7" Fan - White
Accessories, Deck / Galley, Accessories, Fans, SEEKR by Caframo
$68.49
Chinook 707 120V AC 2-Speed 7" Fan - White Everyone's favorite fan. Moves air up to 250 CFM. The most versatile AC fan a boater can have on board! The model 707 Chinook's combination of quality and pe... More Details
Air-Flow Tels Lightweight, ripstop nylon Air-Flow Tels attach to sails with waterproof adhesive locator discs. No holes required. Tels show the air flow across the sails - allowing you to trim sails f... More Details
RCA Cable - Dual Female to 8-Way Male The Dual Female to 8-Way Male RCA Splitter Cable connects compatible Fusion marine stereo to compatible Fusion marine multichannel amplifier. This cable allows us... More Details
Garmin Navionics Vision+ NVAE019R - Taiwan - Marine Chart
Garmin Navionics Vision+ - Foreign, Garmin
$273.99
Navionics Vision+ NVAE019R - Taiwan - Marine Chart Get the world’s No. 1 choice in the marine mapping with the best, most up-to-date Navionics®+ cartography on your compatible chartplotter. Featurin... More Details
Safety Duplex Cable - 14/2 AWG - Red/Yellow - Flat - 500' Ancor safety duplex cable features red and yellow Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common ... More Details
Whitecap Teak Drinkholder w/Removable Cockpit Table Top - Holds 4 Glasses
Deck / Galley, Teak, Whitecap
$783.63
Teak Drinkholder with Removable Cockpit Table Top - Holds 4 Glasses Features: Table Top Dimensions: 16" x 24" Drinkholder holds four glasses Can be used without table Fits all 7/8" or 1" diameter tubi... More Details
Anchor Cleat Kit The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chut... More Details
