Attwood Marine
Zinc Plated Steel Utility Snap Hooks, 2-1/2" - 12303-3 - 23-123033F1
Spring loaded closure.
Zamak Bi-Color Light - 6375D6 - 23-6375D6F1
Die-cast ZAMAK combination light with perma-plate® finish provides 1 mile visibility for power boats up to 39.4' in length. Mounts on decks with external screws. Includes 7-1/2 watt lamp and 7" hard wire leads for 12 VDC electrical connection. 225° visibility.
Yamaha Tank Fitting - 8896Lp6 - 23-8896Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Wood Paddle, 4' - 11761-1 - 23-117611F1
Economical and lightweight. Palm grip. Varnish finish.
Waterbuster Cordless Pump - 818236 - 23-41404F1
This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three alkaline "D" batteries. Lifts water up to 40" and includes a 42" hose with garden hose adapter. Not for use as a permanent bilge pump.
Water Resistant Quiet Blower - 1749-4 - 23-17494F1
The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed.
Universal Rectangular Motor Flusher - 16207-2 - 23-162072F1
Quickly flushes away salt, sand, silt, and alkali to prevent clogging and corrosion. The flusher attaches easily to an ordinary garden hose. Reinforced polypropylene. Self-adjusting clamping yoke fits most domestic or imported I/O's and outboards. Molded cups deliver fresh water from a garden hose to flush the cooling system through side intakes on the lower unit. Note: Do not use full flow from hose.
Universal Motor Flusher - 2729125 - 23-93722F1
Quickly flushes away salt, sand, silt and alkali to prevent clogging and corrosion. The flusher attaches easily to an ordinary garden hose. Reinforced polypropylene. self-ajusting clamping yoke fits most domestic or imported I/O's and outboards. Molded cups deliver fresh water from a garden hose to flush the cooling system through side intakes on the lower unit. NOTE: Do not use full flow from hose.
Universal Fit Bi-Color Pole Light - 1165770 - 23-5091107F1
1-mile, 225° Red/Green light visibility for boats up to 39.4' (12m) in length. Includes 8 watt wedge-base lamp. 2-pin locking collar "universal fit" pole.
Twlocmerc Fitb-Net Setlp - 8899Lp6 - 23-8899Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Turbo 3000-3 Blower White - 1733-4 - 23-17334F1
Patented in-line-design provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces.
Trolling Motor Quick Connect - 14367-6 - 23-143676F1
Safe and easy quick disconnect system. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips.
Transom Tie Down Strap - 15232-7 - 23-152327F1
Strong 2" wide webbing. Quick release (over-center) buckle. Zinc alloy plated finish. Heavy gauge, vinyl-coated, corrosion-resistant S-hook. Hook-N-Loop closure secures the buckle handle in the lock position. Protective pad behind buckle prevents marring and scratching on gel coated or painted surfaces.
Trailer Chain W/Clip 51 X1/4 - 11011-7 - 23-110117F1
Welded, zinc-plated, solid steel chain links with 2 S-hook safety clips. Safety chains can prevent runaway trailer in case of hitch / coupler failure
Tethered 1/4" Spring-Loaded Clevis Pin, Stainless Steel - 66202-3 - 23-662023F1
Stainless steel clevis pin comes w/nylon covered stainless steel lanyard. For use with deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins.
Telescoping Pole Light - 5610-48-7 - 23-5610487F1
Two-mile, 360° visibility, for boats up 65.6 ft. (20m). Stores easily in less space than conventional stern light and can be removed quickly from the any Attwood pole light base. Aluminum pole telescopes from 26" to 42". Includes 12-watt lamp.
Switch Float Attwood W/Cvr W/ - 4201P1 - 23-4201P1F1
Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty.
Sure Grip Rod Holder - 1154228 - 23-50603F1
Designed for drift fishing, pan fishing, and more3/8" diameter coated steel rodUV-resistant plastic coating, protects the rod butt and handleStainless steel wing nut and stemAll Include 50713 surface mount
Stowaway Stern Light 24 Assy - 7100A7 - 23-7100A7F1
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Stainless Steel Scupper Valve - 66553-3 - 23-665533F1
Backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat. The scupper flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce back wash. Fastners are concealed and corrosion-proof. Lifetime warranty. Rugged Stainless Construction Cast from certified enhanced 316 Stainless Steel for strength and lifetime corrosion-resistance.We polish all visible areas to a mirror finish, then each part goes through a passivation for additional protectionThick steel sidewalls withstand continual stress and hose flexing Caution: Thru-Hull connectors are designed for installation above the water line only
S3 Digital Bilge Switch 12V - 1059752 - 23-48017F1
The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected from water or chemical damage. It can be mounted on the floor of the bilge or directly to a stringer. Compatible with all competitive products with no moving parts. 5-Year warranty. 2.73" H x 3.16" W x 1.68" D.
Rod Holder Extension - 1138157 - 23-50163F1
Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6", allowing for faster access when that fish strikes. Made from super tough glass filled nylon. Works with Attwood post mount rod holders.
Replacement Bolt For Battery Tray - 911352 - 23-911352F1
Replacement bolt for battery tray.
Rectangular 2-Pin Chrome Zamak Base, Packaged - 911339-7 - 23-9113397F1
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking-collar series when locking collar is removed.
Rectangular 2-Pin Chrome Zamak Base, Bulk - 911339-1 - 23-9113391F1
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking-collar series when locking collar is removed.
Primer Bulb Low-Perm 5/16 - 93516Lp7 - 23-93516Lp7F1
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Primer Bulb Low-Perm 3/8 - 93038Lp7 - 23-93038Lp7F1
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Pole Light Storage Clips - 7571L7 - 23-75717F1
New design holds larger dia. anti-glare pole lights. Resilient plastic clip holds standard 3/4" dia. poles. Ideal for storing and protecting plug-in pole lights. 2" L x 1-1/2" H. One hole for #8 screws.
Oval 2-Pin Base For Angled Pole - 91022-7 - 23-910227F1
A Plug-In Base for Angled Locking Collar Poles. This tough, resilient 2-pin base is used for angled pole lights with locking collars. Ideal for installation in close quarters, such as narrow gunwales or deck areas. Narrow base has a soft rubber cover with a gasket to seal the socket. Contacts are nickel-plated to resist corrosion and multi-crimped for durability. Wire leads are tinned for corrosion-resistance. Base fits these pole lights. Frosted Globe: 5110 Series w/locking collar pole; Anti-glare: 5310, 5330, 5340 Series; Pulsar Bi-Color 5091-10-7 pole.
Omc Female Tankfitting Lp - 8889Lp6 - 23-8889Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Oil To Gas Mixing Container - 11873-1 - 23-118731F1
Allows the addition of the exact amount of oil required for a 2-cycle engine Oil level marks are in gallons and liters
Mercfemale Tankfitting Lp - 8890Lp6 - 23-8890Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Louver Vent Venturi/White/Bulk - 1494F1 - 23-1494F1F1
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D
Louver Vent Stainless Steel - 1488-5 - 23-14885F1
All-welded 304 stainless steel construction with polished finish. Adapts to 3" or 4" ventilation systems. Predrilled with six mounting holes to accommodate #8 screws. Dimensions: 11-5/16" L x 4-3/8" H x 3/4" D
Lift 'N' Lock Anchor Control - 13700-7 - 23-137007F1
Supports anchors up to 20 lbs. with 1/4" to 1/2" dia. line. Controls anchor from any position. Zinc-plated steel.
Led Micro Lights, White - 6350W7 - 23-6350W7F1
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage boxes without risk of water damage, under hardtops, or even mounted to rails! .75 watts at 12 VDC. Comes with both horizontal and vertical bezels.10-year warranty.
Led Micro Lights, Blue - 6350B7 - 23-6350B7F1
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage boxes without risk of water damage, under hardtops, or even mounted to rails! .75 watts at 12 VDC. Comes with both horizontal and vertical bezels.10-year warranty.
Led 3" Oval Spot/Underwater Light - 6343Ss7 - 23-6343Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC. Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible. Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!
