Attwood Marine
Zinc Plated Steel Utility Snap Hooks, 2-1/2" - 12303-3 - 23-123033F1
Spring loaded closure.
Zamak Bi-Color Light - 6375D6 - 23-6375D6F1
Die-cast ZAMAK combination light with perma-plate® finish provides 1 mile visibility for power boats up to 39.4' in length. Mounts on decks with external screws. Includes 7-1/2 watt lamp and 7" hard wire leads for 12 VDC electrical connection. 225° visibility.
Yamaha Tank Fitting - 8896Lp6 - 23-8896Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Wood Paddle, 4' - 11761-1 - 23-117611F1
Economical and lightweight. Palm grip. Varnish finish.
Waterbuster Cordless Pump - 818236 - 23-41404F1
This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three alkaline "D" batteries. Lifts water up to 40" and includes a 42" hose with garden hose adapter. Not for use as a permanent bilge pump.
Water Resistant Quiet Blower - 1749-4 - 23-17494F1
The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed.
Universal Rectangular Motor Flusher - 16207-2 - 23-162072F1
Quickly flushes away salt, sand, silt, and alkali to prevent clogging and corrosion. The flusher attaches easily to an ordinary garden hose. Reinforced polypropylene. Self-adjusting clamping yoke fits most domestic or imported I/O's and outboards. Molded cups deliver fresh water from a garden hose to flush the cooling system through side intakes on the lower unit. Note: Do not use full flow from hose.
Universal Motor Flusher - 2729125 - 23-93722F1
Quickly flushes away salt, sand, silt and alkali to prevent clogging and corrosion. The flusher attaches easily to an ordinary garden hose. Reinforced polypropylene. self-ajusting clamping yoke fits most domestic or imported I/O's and outboards. Molded cups deliver fresh water from a garden hose to flush the cooling system through side intakes on the lower unit. NOTE: Do not use full flow from hose.
Universal Fit Bi-Color Pole Light - 1165770 - 23-5091107F1
1-mile, 225° Red/Green light visibility for boats up to 39.4' (12m) in length. Includes 8 watt wedge-base lamp. 2-pin locking collar "universal fit" pole.
Twlocmerc Fitb-Net Setlp - 8899Lp6 - 23-8899Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Turbo 3000-3 Blower White - 1733-4 - 23-17334F1
Patented in-line-design provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces.
Trolling Motor Quick Connect - 14367-6 - 23-143676F1
Safe and easy quick disconnect system. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips.
Transom Tie Down Strap - 15232-7 - 23-152327F1
Strong 2" wide webbing. Quick release (over-center) buckle. Zinc alloy plated finish. Heavy gauge, vinyl-coated, corrosion-resistant S-hook. Hook-N-Loop closure secures the buckle handle in the lock position. Protective pad behind buckle prevents marring and scratching on gel coated or painted surfaces.
Trailer Chain W/Clip 51 X1/4 - 11011-7 - 23-110117F1
Welded, zinc-plated, solid steel chain links with 2 S-hook safety clips. Safety chains can prevent runaway trailer in case of hitch / coupler failure
Tethered 1/4" Spring-Loaded Clevis Pin, Stainless Steel - 66202-3 - 23-662023F1
Stainless steel clevis pin comes w/nylon covered stainless steel lanyard. For use with deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins.
Telescoping Pole Light - 5610-48-7 - 23-5610487F1
Two-mile, 360° visibility, for boats up 65.6 ft. (20m). Stores easily in less space than conventional stern light and can be removed quickly from the any Attwood pole light base. Aluminum pole telescopes from 26" to 42". Includes 12-watt lamp.
Switch Float Attwood W/Cvr W/ - 4201P1 - 23-4201P1F1
Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty.
Sure Grip Rod Holder - 1154228 - 23-50603F1
Designed for drift fishing, pan fishing, and more3/8" diameter coated steel rodUV-resistant plastic coating, protects the rod butt and handleStainless steel wing nut and stemAll Include 50713 surface mount
Stowaway Stern Light 24 Assy - 7100A7 - 23-7100A7F1
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Stainless Steel Scupper Valve - 66553-3 - 23-665533F1
Backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat. The scupper flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce back wash. Fastners are concealed and corrosion-proof. Lifetime warranty. Rugged Stainless Construction Cast from certified enhanced 316 Stainless Steel for strength and lifetime corrosion-resistance.We polish all visible areas to a mirror finish, then each part goes through a passivation for additional protectionThick steel sidewalls withstand continual stress and hose flexing Caution: Thru-Hull connectors are designed for installation above the water line only
S3 Digital Bilge Switch 12V - 1059752 - 23-48017F1
The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected from water or chemical damage. It can be mounted on the floor of the bilge or directly to a stringer. Compatible with all competitive products with no moving parts. 5-Year warranty. 2.73" H x 3.16" W x 1.68" D.
Rod Holder Extension - 1138157 - 23-50163F1
Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6", allowing for faster access when that fish strikes. Made from super tough glass filled nylon. Works with Attwood post mount rod holders.
Replacement Bolt For Battery Tray - 911352 - 23-911352F1
Replacement bolt for battery tray.
Rectangular 2-Pin Chrome Zamak Base, Packaged - 911339-7 - 23-9113397F1
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking-collar series when locking collar is removed.
Rectangular 2-Pin Chrome Zamak Base, Bulk - 911339-1 - 23-9113391F1
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking-collar series when locking collar is removed.
Primer Bulb Low-Perm 5/16 - 93516Lp7 - 23-93516Lp7F1
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Primer Bulb Low-Perm 3/8 - 93038Lp7 - 23-93038Lp7F1
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Pole Light Storage Clips - 7571L7 - 23-75717F1
New design holds larger dia. anti-glare pole lights. Resilient plastic clip holds standard 3/4" dia. poles. Ideal for storing and protecting plug-in pole lights. 2" L x 1-1/2" H. One hole for #8 screws.
Oval 2-Pin Base For Angled Pole - 91022-7 - 23-910227F1
A Plug-In Base for Angled Locking Collar Poles. This tough, resilient 2-pin base is used for angled pole lights with locking collars. Ideal for installation in close quarters, such as narrow gunwales or deck areas. Narrow base has a soft rubber cover with a gasket to seal the socket. Contacts are nickel-plated to resist corrosion and multi-crimped for durability. Wire leads are tinned for corrosion-resistance. Base fits these pole lights. Frosted Globe: 5110 Series w/locking collar pole; Anti-glare: 5310, 5330, 5340 Series; Pulsar Bi-Color 5091-10-7 pole.
Omc Female Tankfitting Lp - 8889Lp6 - 23-8889Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Oil To Gas Mixing Container - 11873-1 - 23-118731F1
Allows the addition of the exact amount of oil required for a 2-cycle engine Oil level marks are in gallons and liters
Mercfemale Tankfitting Lp - 8890Lp6 - 23-8890Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Louver Vent Venturi/White/Bulk - 1494F1 - 23-1494F1F1
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D
Louver Vent Stainless Steel - 1488-5 - 23-14885F1
All-welded 304 stainless steel construction with polished finish. Adapts to 3" or 4" ventilation systems. Predrilled with six mounting holes to accommodate #8 screws. Dimensions: 11-5/16" L x 4-3/8" H x 3/4" D
Lift 'N' Lock Anchor Control - 13700-7 - 23-137007F1
Supports anchors up to 20 lbs. with 1/4" to 1/2" dia. line. Controls anchor from any position. Zinc-plated steel.
Led Micro Lights, White - 6350W7 - 23-6350W7F1
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage boxes without risk of water damage, under hardtops, or even mounted to rails! .75 watts at 12 VDC. Comes with both horizontal and vertical bezels.10-year warranty.
Led Micro Lights, Blue - 6350B7 - 23-6350B7F1
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage boxes without risk of water damage, under hardtops, or even mounted to rails! .75 watts at 12 VDC. Comes with both horizontal and vertical bezels.10-year warranty.
Led 3" Oval Spot/Underwater Light - 6343Ss7 - 23-6343Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC. Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible. Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!
Ladder 3-Step Semi-Auto Oem For Boat Builders Only - 19902-36 - 23-1990236F1
Kayak Roof Carrier - J Style - 11441-4 - 23-114414F1
Easy to install kayak carrier mounts on most standard roof racks. J-style open design allows for easy loading and unloading of kayaks. Durable powder-coated steel construction holds up to 120 lbs. Foam rubber protection pads and detailed instructions included.
In-Line Fuel Splice Kit - 11822-6 - 23-118226F1
Kit includes brass hose mender and 2 stainless steel hose clamps. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Hollow Base Cleat 6 (1 Pair) - 1587132 - 23-62456F1
The clean lines and modern look of these cleats are in tune with styling of today's boats. Enhanced 316 Stainless Steel construction.
Group 27 Battery Holder - 2627312 - 23-90935F1
A simple-to-install battery tray that fits into a limited space. For batteries up to 10-1/2" in height. Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle. Molded base mounts with four #10 panhead screws.
Group 24 Battery Holder - 2626947 - 23-90925F1
A simple-to-install battery tray that fits into a limited space. For batteries up to 10-1/2" in height. Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle. Molded base mounts with four #10 panhead screws.
Gimballed Drink Holder Mug Size - 11672-4 - 23-116724F1
Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws.
Gear Lube Pump - 11891D7 - 23-11891D7F1
The pump fits any outboard or sterndrive and includes one Yamaha® adapter.
Fuel Tank Fitting Yamaha 1/4" - 2555756 - 23-88976F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Tank Fitting 1/4" Je/Omc - 2550642 - 23-88836F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Kit Yamaha 6'X3/8 Usc - 93806Yus7 - 23-93806Yus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Univ 6'X3/8 Usc - 93806Uus7 - 23-93806Uus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Omc 6'X3/8 Usc - 93806Eus7 - 23-93806Eus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Mercury 6'X3/8 Usc - 93806Mus7 - 23-93806Mus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Hose Fitting 1/4" Merc - 2546990 - 23-88736F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Demand Valve - 9300Fdv7 - 23-9300Fdv7F1
Fuel Demand Valve Prevents engine flooding due to new pressurized fuel systems and eliminates fuel spray when connecting or disconnecting fittings at the engine. Prevents fuel spill and engine damage associated with pressurized fuel. Compatible with ethanol fuel.
Economy Rod Holder-Black 2/Pk - Rh-4646 - 23-Rh4646F1
Features fixed vertical angle to optimize rod positioning. Smaller size is perfect for medium and light action gear. Rod throat opening fits most standard and ultra-light rods up to 1-3/16" diameter. Locking ring fits spinning reel handle shanks up to 7/16" diameter.
Deluxe Deck Brush Kit - 11807-2 - 23-118072F1
Kit includes: Soft brush with squeegee end for gentle, scratch-free cleaningTelescoping aluminum pole with flow-through design has water on/off switch and comfortable foam gripsNylon boat hook attachmentNylon boat hook attachment
Coupler Security Lock - 12044-6 - 23-120446F1
One piece. For maintenance-free trailer security. Solid brass with rustproof stainless steel shackle pin. Includes two keys. Shank length: 5/8" x 1/4" diameter.
Complete Trailer Wiring Kit - 2089736 - 23-76217F1
(1) Receptical and harness, 4 ft. (1.2 m) (1) Plug and harness, 25 ft. (7.6m)
Clamp On Rod Holder - 66970-7 - 23-669707F1
304 stainless steel with black composite liner. Can be used on vertical or horizontal rails.
Chain Links - 3" Zinc Plated Steel - 12357-3 - 23-123573F1
Formed, zinc plated steel.
Cast Iron Galvanized Dock Cleat 8", Bulk - 12102-1 - 23-121021F1
Cast iron dock cleat with galvanized finish. Two holes for required fasteners.
Cast Iron Galvanized Dock Cleat 8" - 12102L3 - 23-12102L3F1
Cast iron dock cleat with galvanized finish. Two holes for required fasteners.
Cast Iron Galvanized Dock Cleat 6" - 12100L3 - 23-12100L3F1
Cast iron dock cleat with galvanized finish. Two holes for required fasteners.
Bi-Color Stowaway Plug-In Pole - 1166136 - 23-5092107F1
1-mile, 225° Red/Green light visibility for boats up to 39.4' (12m) in length. Includes 8 watt wedge-base lamp. 2-pin locking collar "universal fit" pole.
Battery Tray 27M-W/Cross Bar - 2626581 - 23-90915F1
Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.
Battery Tray 24M-W/Cross Bar - 2626216 - 23-90905F1
Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.
Battery Clips, Pr. - 14258-6 - 23-142586F1
All copper construction with red and black handle grips. 3" x 1-1/8". For use with wire up to 10-gauge.
Auto.Float Switch W/Cover 12V - 840606 - 23-42017F1
Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty.
Auto Float Switch Only 12V + - 840971 - 23-42027F1
Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty.
Attwood Zinc Plated Steel Universal Snap Hook - 2100571 - 23-76513F1
Spring loaded closure.
Attwood Zinc Plated Steel Universal Snap Hook - 12305-3 - 23-123053F1
Spring loaded closure.
Attwood Xfs Multi-Function Sport Light - Realtree Max-4 Camoflauge - 14187Xfs-7 - 23-14187Xfs7F1
Durable, water-resistant multi-function light for fishing, boating, camping and more. Bright LED white flood light, red for night vision such as fishing, and ultraviolet to charge ultraviolet (UV) lures and fishing lines. Battery operated (six AA not included). Four mounting options. Includes a mount adapter that is compatible with an Attwood rod holder mount and a mounting clamp that fits up to 3-inches. Rotates 360° and flips forward and back.
Attwood Wiring Harness/Connector 4-Way Flat, 18" Plug And 48" Socket - 2105015 - 23-76635F1
The most popular 4-way flat wiring harness kit for vehicles and trailers. Copper-stranded, color-coded wire and plastic molded terminals with four-prong trailer plug or vehicle socket. Both ends have 18" plug wire and 48" socket wire.
Attwood Whitley Cleat - 66064-1 - 23-660641F1
Unique offset design, polished stainless finish provides an attractive, premium appearance. Enhanced 316 stainless steel construction, acid and rinsing baths remove surface contaminants and produce a mirror-finish hydrous oxide film. Stainless steel locking buts and washers are supplied to fit the concealed stainless steel studs.
Attwood Vent-Venturi Black - 1494A5 - 23-1494A5F1
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D
Attwood Universal Pontoon Replacement Gate Latch, White - 11404-6 - 23-114046F1
This durable lock set is a complete replacement kit for your pontoon's gate latch. Universal sizing fits square frames of 1", 1-1/8", and 1-1/4" on both left- and right-hinged gates. Secure closure stabilizes gate and prevents inward swinging. Includes mounting hardware for quick and easy installation.
Attwood Universal Fuel Connector 90 Degree Male Elbow 1/4" Npt - 2552103 - 23-88876F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads.
Attwood Twist On Hose Flange For 3" Hose, Black - 1405-3 - 23-14053F1
For 3" I.D. hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with four mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed.
Attwood Transducer Mounting Plate And Hardware - 94110-5 - 23-941105F1
For easy mounting, addition and replacement of transducers Marine grade polymer will not warp, corrode or be affected by UV raysMounts easily with two screws
Attwood Trailer Tongue Lift Handle - 11130-7 - 23-111307F1
Convenient handle for maneuvering trailer tongue. Mounts easily to most trailer couplers.
Attwood Trailer Guide Lights (Sold As Pair) - 14066-7 - 23-140667F1
Trailer guide lights aid in backing and maneuvering trailers at boat ramps and in tight areas. Waterproof, bright red LED lights make it easy to identify trailer angle and position, even in low light conditions. Mount to trailer frame or guidepost with corrosion-resistant aluminum and steel mounting. NOTE: Mounting hardware not included.
Attwood Toggle On/Off/On Switch, Metal Handle - 14255-3 - 23-142553F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Toggle On/Off Switch, Metal Handle - 14253-3 - 23-142533F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Thru Hull Stainless Steel 5/8" For Hose, Short - 66540-3 - 23-665403F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 5/8" For Hose - 66546-3 - 23-665463F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose, Short - 66541-3 - 23-665413F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose - 66547-3 - 23-665473F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose, Short - 66542-3 - 23-665423F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose - 66548-3 - 23-665483F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose, Short - 66543-3 - 23-665433F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose - 66549-3 - 23-665493F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose, Short - 66544-3 - 23-665443F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose - 66550-3 - 23-665503F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose, Short - 66545-3 - 23-665453F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose - 66551-3 - 23-665513F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Scupper For Hose, White - 1-1/2" - 723548 - 23-38811F1
The popular 3876 scupper mounted to a 3875B 1-1/2" thru-hull as a complete assembly. Made of high-impact corrosion resistant white plastic with flapper valve that opens outward to dump water overboard and closes to help prevent backwash from entering cockpit. Installation hole size is 2".
Attwood Thru Hull Connector For Hose, White, 90 Degree - 3/4" - 722146 - 23-38773F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 5/8" - 720320 - 23-38723F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 729086 - 23-38963F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 720685 - 23-38733F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 1-1/8" To 1-1/4" - 721050 - 23-38743F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 1-1/2" - 721415 - 23-38753F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Sure Grip Rod Holder 5 Degree 8" Horizontal - 1154593 - 23-50613F1
Designed for drift fishing, pan fishing, and more 3/8" diameter coated steel rodUV-resistant plastic coating, protects the rod butt and handleStainless steel wing nut and stemAll Include 50713 surface mount
Attwood Stowaway All Round Light, 36" W/ Base - 7100C7 - 23-7100C7F1
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Attwood Stowaway All Round Light, 30" W/ Base - 7100B7 - 23-7100B7F1
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Attwood Steering Wheel Soft Grip 13" - 2343122 - 23-83154F1
Ideal for bass boats and runabouts. Comfortable firm grip, soft, black PVC outer rim and high-impact, one-piece plastic inner core. Non-magnetic. Black plastic center cap. Fits standard 3/4" shaft. 3-3/8" dish.
Attwood Standard Size Wire Frame Drink Holder - 11670-4 - 23-116704F1
Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws.
Attwood Standard Non-Vented Battery Box For Group 24/24M, Black - 2618426 - 23-90691F1
Non-vented. All battery boxes meet ABYC standard E-10 and U.S.C.G. Specification Number 183.420 as an OEM-installed battery hold-down system. Polypropylene construction for total acid resistance. Hold-down straps resist 350 pounds of force, nearly four times the U.S.C.G. requirement. Battery boxes are drop tested in temperatures ranging from -20°F to +120°F. Mounting hardware is included.
Attwood Standard Glove Box Black - 269551 - 23-26381F1
Plastic box and door are lightweight and sturdy. Opens easily on a stainless steel hinge pin and locks with a marine locking latch. Installation hole size is 12"L x 4-1/4"H.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 90 Lb - St34-90-5 - 23-St34905F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 60 Lb - St34-60-5 - 23-St34605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 40 Lb - St34-40-5 - 23-St34405F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 20 Lb - St34-20-5 - 23-St34205F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 17.2" Extended, 10.2" Compressed, 90 Lb - St36-90-5 - 23-St36905F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 17.2" Extended, 10.2" Compressed, 70 Lb - St36-70-5 - 23-St36705F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 60 Lb - St33-60-5 - 23-St33605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 40 Lb - St33-40-5 - 23-St33405F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 20 Lb - St33-20-5 - 23-St33205F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 12" Extended, 8.5" Compressed, 60 Lb - St35-60-5 - 23-St35605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 10.5" Extended, 7.5" Compressed, 30 Lb - St32-30-5 - 23-St32305F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood St11401 Gas Spring 7.5" Extended, 5.25" Compressed, 40 Lbs. - St11-40-1 - 23-St11401F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Square 2 Pin Base For Straight Pole - 911370-1 - 23-9113701F1
Nylon. For traditional Attwood pole lights. Hinged cover snaps closed to keep dirt and water out when light is stowed. Four countersunk holes for installation. Includes 7-1/2" hard wire leads for connection to 12 VDC power supply. Dimensions: 2-1/4"L x 1-3/4"W. 1-1/4" diameter installation hole.Base fits the following poles: Frosted globe 5100 series standard pole & 5110* series locking collar pole; Anti-glare 5320*, 5330*, & 5340* series; Pulsar bi-color poles 5092*. (*when locking-collar is removed).
Attwood Spare Tire Carrier - 11090-3 - 23-110903F1
Square bend u-bolt with bracket mounts tire on tongue or trailer frame. Fits frames 2" square or rectangular 3-1/2" x 4". Fits 4 or 5 lug hole rims. Extra long 8-1/2" shaft fits 8" to 15" tires. Padlock is not included.
Attwood Solid Braid Mfp Dock Line, 3/8" X 15' Black - 11752-7 - 23-117527F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel with one end spliced.
Attwood Solid Braid Mfp Anchor Line, 3/8" X 50' White - 11723-7 - 23-117237F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel. 100% Multifilament PolypropyleneEasy to handleStays flexible throughout its lifeUV resistant floatable line
Attwood Solid Braid Mfp Anchor Line, 3/8" X 50' Red - 11736-7 - 23-117367F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel. 100% Multifilament PolypropyleneEasy to handleStays flexible throughout its lifeUV resistant floatable line
Attwood Solid Braid Mfp Anchor Line, 3/8" X 50' Blue - 11741-7 - 23-117417F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel. 100% Multifilament PolypropyleneEasy to handleStays flexible throughout its lifeUV resistant floatable line
Attwood Solid Braid Mfp Anchor Line, 3/8" X 50' Black - 11742-7 - 23-117427F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel. 100% Multifilament PolypropyleneEasy to handleStays flexible throughout its lifeUV resistant floatable line
Attwood Sl36905 Gas Spring 17.2" Extended, 10.2" Compressed, 90 Lbs. - Sl36-90-5 - 23-Sl36905F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36705 Gas Spring 17.2" Extended, 10.2" Comprssed, 70 Lbs. - Sl36-70-5 - 23-Sl36705F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36505 Gas Spring 17.2" Extended, 10.2" Compressed, 50 Lbs. - Sl36-50-5 - 23-Sl36505F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36305 Gas Spring 17.2" Extended, 10.2" Compressed, 30 Lbs. - Sl36-30-5 - 23-Sl36305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36205 Gas Spring 17.2" Extended, 10.2" Compressed, 20 Lbs. - Sl36-20-5 - 23-Sl36205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl35405 Gas Spring 8.46" Extended, 12.04" Compressed, 40 Lbs. - Sl35-40-5 - 23-Sl35405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl35305 Gas Spring 8.46" Extended, 12.04" Compressed, 30 Lbs. - Sl35-30-5 - 23-Sl35305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34905 Gas Spring 20" Extended, 12" Compressed, 90 Lbs. - Sl34-90-5 - 23-Sl34905F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34605 Gas Spring 20" Extended, 12" Compressed, 60 Lbs. - Sl34-60-5 - 23-Sl34605F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34405 Gas Spring 20" Extended, 12" Compressesd, 40 Lbs. - Sl34-40-5 - 23-Sl34405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34305 Gas Spring 20" Extended, 12" Compressed, 30 Lbs. - Sl34-30-5 - 23-Sl34305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34205 Gas Spring 20" Extended, 12" Compressed, 20 Lbs. - Sl34-20-5 - 23-Sl34205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl341205 Gas Spring 20" Extended, 12" Compressed, 120 Lbs. - Sl34-120-5 - 23-Sl341205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl33605 Gas Spring 15" Extended, 9.5" Compressed, 60 Lbs. - Sl33-60-5 - 23-Sl33605F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl33405 Gas Spring 15" Extended, 9.5" Compressed, 40 Lbs. - Sl33-40-5 - 23-Sl33405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl33205 Gas Spring 15" Extended, 9.5" Compressed, 20 Lbs. - Sl33-20-5 - 23-Sl33205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl32305 Gas Spring 10.5" Extended, 7.5" Compressed, 30 Lbs. - Sl32-30-5 - 23-Sl32305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl31405 Gas Spring 7.5" Extended, 5.25" Compressed, 40 Lbs. - Sl31-40-5 - 23-Sl31405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl31305 Gas Spring 7.5" Extended, 5.25" Compressed, 30 Lbs. - Sl31-30-5 - 23-Sl31305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl31205 Gas Spring 7.5" Extended, 5.25" Compressed, 20 Lbs. - Sl31-20-5 - 23-Sl31205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl30405 Gas Spring 10" Extended, 7" Compressed, 40 Lbs. - Sl30-40-5 - 23-Sl30405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl30205 Gas Spring 10" Extended, 7" Compressed, 20 Lbs. - Sl30-20-5 - 23-Sl30205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl27100 Gas Spring 28" Extended, 16.5" Compressed, 100 Lbs. - Sl27-100-1 - 23-Sl27100 Superseded By: 23-Sl271001F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl2405 Gas Spring 15" Extended, 9.5" Compressed, Blade Style, 40 Lbs. - Sl2-40-5 - 23-Sl2405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl1405 Gas Spring 10" Extended, 7" Compressed, Blade Style, 40 Lbs. - Sl1-40-5 - 23-Sl1405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl1205 Gas Spring 10" Extended, 7" Compressed, Blade Style, 20 Lbs. - Sl1-20-5 - 23-Sl1205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Side Lights Deck Mount, Stainless Steel - Red - 66319R7 - 23-66319R7F1
Stainless steel. Provide 1-mile visibility for boats up to 39.4' in length Includes 8-watt lamp. Installs with (3) #6 fasteners (not included)112.5° VisibilitySize: 2-1/2"L x 2-1/4"W x 1-1/2"H
Attwood Side Lights Deck Mount, Stainless Steel - Green - 66319G7 - 23-66319G7F1
Stainless steel. Provide 1-mile visibility for boats up to 39.4' in length Includes 8-watt lamp. Installs with (3) #6 fasteners (not included)112.5° VisibilitySize: 2-1/2"L x 2-1/4"W x 1-1/2"H
Attwood Scupper Valve - 721781 - 23-38763F1
Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent water from entering. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation). Use as a replacement valve for 3881 thru-transom scupper.Caution: Thru-hull connectors are designed for installation above the water line only.
Attwood Rubber Bow Roller, 3" - 11205-1 - 23-112051F1
Durable protective molded rubber bow rollers Non-marring prime rubber compound
Attwood Rod Storage Holder - 12750-6 - 23-127506F1
Holds up to 3 fishing rods. Closed cell foam insert protects rod. Mount vertical or horizontal. 8-3/4"L x 2-1/2" W.
Attwood Rod Holder Rail Mount For 3/4 To 1-1/4" Rails, Black - 1136818 - 23-50127F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Rod Holder Flush Mount Stainless Steel 30 Degree Black Closed End - 66470-7 - 23-664707F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 15 Degree White Open End - 66363W7 - 23-66363W7F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 15 Degree Black Open End - 66363-7 - 23-663637F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 0 Degree White Open End - 66364W7 - 23-66364W7F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Black - 1140470 - 23-50227F1
Flush mount, interchangeable mounting base fits 2-in 1, Pro Series, and Mini Rigger fishing systems. Mounts to gunwale or deck. Easy-open cover conceals
Attwood Rod Holder Combo Mount Black - 1136452 - 23-50117F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50227: Flush mount, mounts to gunwale or deck. Easy-open cover conceals fasteners and elastomeric liner seals water out. When closed, the low-profile, contoured design avoids snagging.50117/5011W7: Combo side/surface mount can be used on a vertical or horizontal surface or used with the 50127 rail adapter.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Replacement Cover For 1670 Fuel Tank Vent - 911526-1 - 23-9115261F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340 - 912852-7 - 23-9128527F1
Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340
Attwood Replacement Anti-Glare Lens For 3900 Series - 912021-7 - 23-9120217F1
Replacement Anti-Glare Lens For 3900 Series
Attwood Replacement 360 Degree Globe For Series 6700 - 1762052 - 23-6724051F1
Replacement 360° Globe For Series 6700
Attwood Rectangular Flush Hatch Pull - 46569 - 23-20277F1
The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
Attwood Quick Disconnect Seat Mount 7" Swivel - 11603D1 - 23-11603D1F1
Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.
Attwood Quick Disconnect Seat Mount 6-1/4" Swivel - 11602D1 - 23-11602D1F1
Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.
Attwood Push/Pull Switch Two-Position - 2068521 - 23-75636F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Push/Pull Switch Three-Position - 2079752 - 23-75943F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Pulsar Side Light, Raised Base, Red Lens - 5080R7 - 23-5080R7F1
Pulsar Sidelight w/Raised Base, Red
Attwood Pulsar Side Light, Raised Base, Green Lens - 5080G7 - 23-5080G7F1
Pulsar Sidelight w/Raised Base, Green
Attwood Pulsar Side Light Deck Mount Starboard - Green - 5040G7 - 23-5040G7F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.Size: 2-3/8" diameter x 1-7/16" vertical height.
Attwood Pulsar Side Light Deck Mount Port - Red - 5040R7 - 23-5040R7F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.Size: 2-3/8" diameter x 1-7/16" vertical height.
Attwood Pulsar Deck Mount Bi-Color Light, Black - 1148871 - 23-50457F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads. Install with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Visible 225°. Size: 2-3/8" Dia. x 1-7/16" H.
Attwood Primer Bulb For 1/4" Hose - 93014Lp7 - 23-93014Lp7F1
EPA COMPLIANT / CARB CERTIFIEDMulti layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Attwood Portable Led Spot Light - 11794-7 - 23-117947F1
Compact 5 Watt LED spot light can be stored most anywhere on the boat. Rated for 50-100,000 hours of life. Tough thermoplastic construction in safety yellow/black. Includes a 10' powercord and 12 volt "cigarette-style" adaptor plug with fuse.
Attwood Pontoon Storage Blocks (Set Of 4) - 11401-4 - 23-114014F1
Discover hassle-free storage with our lightweight and extra-strong pontoon blocks. Designed with special features for added stability and convenience, each storage block can hold up to 4,000 pounds. The bottom has a molded-in texture to ensure maximum grip on concrete or ground surfaces, while the pre-drilled holes make fastening or staking easy. Ergonomic hand-holds make carrying more comfortable. Drainage channels and holes prevent water from pooling against your pontoon. UV-resistant material for long-lasting durabilityContoured design fits the shape of a pontoonEasily stored by stacking or hangingMade in USA
Attwood Polypropylene Double Ended Thru-Hull Connection For 3/4" Hose - 722511 - 23-38783F1
Double-ended thru-hull provides watertight transition through bulkheads or tanks. 5" overall length. Polypropylene construction.Note: Thru-Hull connectors are designed for installation above the water line only
Attwood Oval Hawse Pipe Stainless Steel - 66223-3 - 23-662233F1
316 Stainless Steel. Four holes for required #10 fasteners.
Attwood Oar Locks Clamp On - 2646608 - 23-91463F1
Fits most popular oar sizes. Bright zinc-plated steel resists rust. No drilling necessary. Fastens securely to oar with one adjustable bolt.
Attwood Nv6Lc214Bp7 Lightarmor™ Fast Action Bi-Color Led Pole Light, 14" W/3-Pin Locking Collar & Task Light - Nv6Lc2-14Bp7 - 23-Nv6Lc214Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLED light engines last for 50,000 hoursThreaded Locking Collar fits securely with LightArmor Plug-In Light Bases5-year warranty
Attwood Nv6Lc114Bp7 Lightarmor™ Fast Action Bi-Color Led Pole Light, 14" W/2-Pin Locking Collar - Nv6Lc1-14Bp7 - 23-Nv6Lc114Bp7F1
Premium LED light with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today's boat designs. ISO 19009:2015 CertifiedImpact-resistant polycarbonate lensWater resistantCorrosion/UV resistantLED light engines last for 50,000 hoursThreaded Locking Collar fits securely with LightArmor Plug-In Light Bases5-year warranty
Attwood Non-Adjustable Aerator Spray Head, Single Valve, 3/4" Hose - 4118A5 - 23-4118A5F1
Single valve spray head. Constructed of ABS plastic. For output from an aerator pump into the livewell.
Attwood Neat Cleat 8" - 66519-1 - 23-665191F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 6" - 66517-7 - 23-665177F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 4-1/2" - 66515-7 - 23-665157F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Navy Anchor 20 Lbs. - 2934725 - 23-99351F1
Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud.
Attwood Navy Anchor 15 Lbs. - 2934360 - 23-99341F1
Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud.
Attwood Navy Anchor 10 Lbs. - 2933995 - 23-99331F1
Aluminum painted high quality gray iron casting. Combines weight and flukes to dig in and hold firmly in sand and mud.
Attwood Molded Plastic Strainer Fits Aerator Inlet And 3886-1 Thru Hull - 725068 - 23-38853F1
A cetal plastic durable strainer to prevent debris from clogging baitwell drains and aerator pumps.
Attwood Low Profile 12 Gallon Epa/Carb Compliant Fuel Tank - 8812Llpg2 - 23-8812Llpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Low Profile 12 Gallon Epa/Carb Compliant Fuel Tank - 8812Llp2 - 23-8812Llp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Louvered Vent, Off White - 1495-1 - 23-14951F1
Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. For 3" I.D. ventilation system use with 13451 collector box. Installs with #8 fasteners. Dimensions: 17-7/8" L x 3-7/16" H x 3/4" D
Attwood Louvered Vent Flush Mount-White - 1425-5 - 23-14255F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent Flush Mount-Black - 1423-5 - 23-14235F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle - 7534A3 - 23-7534A3F1
Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.
Attwood Livewell/Bailer Drain Plug, Brass Snap-Handle - 7533A7 - 23-7533A7F1
Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 3-Pin, Black - 910T3Pb-7 - 23-910T3Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 3-Pin, 316 S.S. - 910T3Psb-7 - 23-910T3Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 2-Pin, Black - 910T2Pb-7 - 23-910T2Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Teardrop Series, 2-Pin, 316 S.S. - 910T2Psb-7 - 23-910T2Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 3-Pin, Black - 910R3Pb-7 - 23-910R3Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 3-Pin, 316 S.S. - 910R3Psb-7 - 23-910R3Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 2-Pin, Black - 910R2Pb-7 - 23-910R2Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Round Series, 2-Pin, 316 S.S. - 910R2Psb-7 - 23-910R2Psb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Rectangle Series, 3-Pin, Black - 910V3Pb-7 - 23-910V3Pb7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor™ Plug-In Base - Rectangle Series, 3-Pin, 316 S.S. - 910V3Ss-7 - 23-910V3Ss7F1
LightArmor Plug-In Light Bases feature a threaded design for a secure, rattle-free fit with LightArmor Pole Lights. No matter what pole light you have you will get the same fit. The solution is the unique locking collar that makes retrofitting any pole light simple and easy.
Attwood Lightarmor Led Vertical Surface Mount Starboard Side Light, Round - Nv3012Ssg-7 - 23-Nv3012Ssg7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Starboard Side Light, Oval - Nv4012Ssg-7 - 23-Nv4012Ssg7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Port Side Light, Round - Nv3012Ssr-7 - 23-Nv3012Ssr7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Vertical Surface Mount Port Side Light, Oval - Nv4012Ssr-7 - 23-Nv4012Ssr7F1
Top-quality materials, robust construction, durability, and a sleek design. 2 NM U.S.C.G. CertifiedProprietary modular LED light engine technologyDesign flexibility and ease of installationCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Stainless, Starboard Side - Nv2012Ssg-7 - 23-Nv2012Ssg7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Black, Starboard Side - Nv2012Pbg-7 - 23-Nv2012Pbg7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Black, Stainless Side - Nv2012Ssr-7 - 23-Nv2012Ssr7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Led Deck Mount Side Light, Black, Port Side - Nv2012Pbr-7 - 23-Nv2012Pbr7F1
Streamlined deck mount lights that meet today's global regulatory requirements. 2 NM U.S.C.G. CertifiedCorrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined styling
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 14" Straight W/Task Light - Nv6Lc2-14-7 - 23-Nv6Lc2147F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 14" Straight - Nv6Lc1-14-7 - 23-Nv6Lc1147F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most basesAvailable with a task light option
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 14" Angled - Nv6Lc1-14A7 - 23-Nv6Lc114A7F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 10" Straight W/Task Light - Nv6Lc2-10-7 - 23-Nv6Lc2107F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Navigation Pole Light, 10" Angled - Nv6Lc1-10A7 - 23-Nv6Lc110A7F1
Streamlined vertical surface mount sidelights that meet today's global regulatory requirements. LED's are cool to the touch, long lasting (50,000+) hours and have color indicated cores for ease of installation. USCG Approved. Corrosion ResistantWater-Resistant (IP Rating 67)Features tell-tale indicators for ease of useSmaller footprint with refined stylingDual locking collar compatible with most bases
Attwood Lightarmor Bi-Color Led Deck Mount Light, Black Composite - Nv2002Pb-7 - 23-Nv2002Pb7F1
Lights feature LightArmor intelligent engineering. Water resistant (IP rating 67) and feature a smaller footprint with refined styling. Tough PC/ABS HousingLED Light Engine ModuleFeature tell-tale indicatorsSantoprene™ Gasket2 NM U.S.C.G. CertifiedMeet Domestic and Global Regulatory RequirementsCorrosion Resistant
Attwood Lightarmor Bi-Color Led Deck Mount Light, 304 Stainless Steel - Nv2002Ss-7 - 23-Nv2002Ss7F1
Lights feature LightArmor intelligent engineering. Water resistant (IP rating 67) and feature a smaller footprint with refined styling. Tough PC/ABS HousingLED Light Engine ModuleSantoprene™ Gasket2 NM U.S.C.G. CertifiedMeet Domestic and Global Regulatory RequirementsCorrosion Resistant
Attwood Led Trailer Light Kit - 14065-7 - 23-140657F1
Complete kit includes two multi-functional (stop/tail/turn) submersible LED trailer lights, license plate bracket, wiring harness, installation hardware and instructions. For use with trailers under 80" wide. Conforms to U.S. FMVSS & Canadian CFMVSS standards
Attwood Led Multi-Function Sport Light, Grey - 14185Xfs-7 - 23-14185Xfs7F1
Durable, water-resistant multi-function light for fishing, boating, camping and more. Bright LED white flood light, red for night vision such as fishing, and ultraviolet to charge ultraviolet (UV) lures and fishing lines. Battery operated (six AA not included). Four mounting options. Includes a mount adapter that is compatible with an Attwood rod holder mount and a mounting clamp that fits up to 3-inches. Rotates 360° and flips forward and back.
Attwood Led Low-Profile Trailer Light Kit - 14064-7 - 23-140647F1
Complete kit includes: two multi-functional (stop/tail/turn) submersible low-profile LED trailer lights, license plate bracket, wiring harness, installation hardware, and instructions. Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
Attwood Led Folding Pole All-Round Light 54" - 5540-54A7 - 23-554054A7F1
Provides 2-mile, 360° visibility for boats up to 39.4 feet. 3 watts at 12VDC and rated for 50,000+ hours of use. LED lights are completely sealed and watertight. 10-year warranty. Compatible with both Attwood and Perko bases. Use with 2-pin locking collar pole.
Attwood Led Articulating All-Round Light, 48" - 5530-48A7 - 23-553048A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light, 24" - 5530-24A7 - 23-553024A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light - 5530-60A7 - 23-553060A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light - 5530-54A7 - 23-553054A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Led Articulating All-Round Light - 5530-36A7 - 23-553036A7F1
These lights are smaller, 60% lighter by weight and 30% brighter than the older LED All Around Lights. Two-mile, 360° visibility for boats up to 39.4' (12 m). Low power draw. Proprietary optics design draws only 3 watts at 12 VDC. Light also features an articulating head that adjusts 15° fore and aft to fit all base angles. Universal fit locking collars. Compatible with both Attwood and Perko plug-in bases. Fully sealed electronics. Operating range 10.5 - 14.4 VDC.
Attwood Large Flush Lift Ring, Chrome Plated Brass - 520532 - 23-33253F1
Chrome-plated brass. Provides strength for lifting large and heavy hatch covers.
Attwood Hollow Braid Polypropylene Anchor Line W/Hook, 1/4" X 50' White - 11714-2 - 23-117142F1
Solid braided nylon offers a rope that has a strong round cord that will not flatten out which stays flexible throughout its life and have a soft hand. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals.
Attwood Hollow Base Cleat Die Cast Zamak With Chrome Finish 4-1/2" (2/Pk) - 1586767 - 23-62446F1
The clean lines and modern look of these cleats are in tune with styling of today's boats. Enhanced 316 Stainless Steel construction.
Attwood Herreshoff Cleat Heavy Duty, 8" - 66110-3 - 23-661103F1
This heavy-duty herreshoff is a wider, taller, heavier version of the herreshoff cleat. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Heavy Duty Bilge Pump 2000 Gph - 1044686 - 23-47604F1
Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty
Attwood Heavy Duty Bilge Pump 1700 Gph - 1033728 - 23-47304F1
Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty
Attwood Heavy Duty Battery Tray For Group 29/31 - 2627677 - 23-90945F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 27 - 2628042 - 23-90955F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 24/24 - 2628408 - 23-90965F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Hatch/Lift Spring Stainless Steel 8-3/4" - 12461-3 - 23-124613F1
Holds hatch or motor box open, bends to close. Flush mounting dimensions: 7/16" diameter spring x 8-3/4" long predrilled for #8 screws. Stainless steel.
Attwood Hatch Hinge Stainless Steel, Open Size 3-1/2" X 1-3/8" - 66027-3 - 23-660273F1
Stainless steel with removable pin so that hatches can be completely removed without removing hinges. Predrilled for 8 screws. Skin packed.
Attwood Gimbaled Drink Holder White - 11631-4 - 23-116314F1
Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining.
Attwood Gimbaled Drink Holder Black - 11635-4 - 23-116354F1
Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining.
Attwood Gas Deck Fill For 1-1/2" Hose, Stainless Steel - 66406-5 - 23-664065F1
316 stainless steel for 1-1/2" hose. Imprinted with "Gasoline". Flush cap is slotted for a key and is O-ring sealed. Cap is attached by a SS beaded chain. 3-1/4" long fill neck.
Attwood Funnel, Short Rigid With Handle - 14582-1 - 23-145821F1
The filter funnel features fine mesh filters that filter out most foreign particles. Non-splashing. Lightweight floating polyethylene plastic construction.
Attwood Fuel Tank Vent Standard Mount For 5/8" Hose 90 Degree Stainless Steel - 66419-3 - 23-664193F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent Flush Mount 90 Degree - 66032-3 - 23-660323F1
316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets.
Attwood Fuel Tank Vent Flush Mount - Straight - 66031-3 - 23-660313F1
316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets.
Attwood Fuel Tank Vent Black - 1607-3 - 23-16073F1
Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations.
Attwood Fuel Tank Vent 90 Degree Standard Mount For 5/8" Hose White - 1671-1 - 23-16711F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent 90 Degree Standard Mount For 5/8" Hose Black - 1670-3 - 23-16703F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent 90 Degree Flush Mount For 5/8" Hose Stainless Steel - 1674-6 - 23-16746F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Epa Compliant 6 Gallon With Gauge, 2 Pack - 8806Lpg2 - 23-8806Lpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.Priced individually, sold in packs of 2 only.
Attwood Fuel Tank Epa Compliant 3 Gallon With Gauge - 8803Lpg2 - 23-8803Lpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Fuel Tank Epa Compliant 12 Gallon With Gauge - 8812Lpg2 - 23-8812Lpg2F1
EPA/CARB COMPLIANTFuel tanks are constructed of high -impact molded plastic. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Fuel Line Surge Protector For 5/8" Hose - 1675-6 - 23-16756F1
Meets ABYC Standards. Helps avoid fuel spills because the surge helps automatic fuel nozzles shut off as the tank fills. Glass-filled polypropylene construction and surge-ball design. Withstands oil, gas, and alcohol-blended fuels. Compact size allows installation inside gunwale in any orientation within 45° of vertical. Includes two hose clamps.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Mercury Pre 1998 3/8" X 6' - 93806Aus7 - 23-93806Aus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Honda 3/8" X 6' - 93806Hus7 - 23-93806Hus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Force 3/8" X 6' - 93806Fus7 - 23-93806Fus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit Universal 5/16" X 6' - 951606Ulp7 - 23-951606Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' With Fuel Demand Valve And Sprayless Connector - 93806Uusd7 - 23-93806Uusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' - 93806Ulp7 - 23-93806Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Mercury - 93806Musd7 - 23-93806Musd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Evinrude - 93806Eusd7 - 23-93806Eusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit 3/8" X 6' For Yamaha - 93806Ylp7 - 23-93806Ylp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' For Mercury 1998 And Older - 93812Ulp7 - 23-93812Ulp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Line Hose Kit 3/8" X 6' For Evinrude - 93806Elp7 - 23-93806Elp7F1
EPA COMPLIANTFuel Kit with multi-layer primer bulb. Low-permeation fuel line kit. Ethanol compatible. EPA certified compliant hose. Multi-layer primer bulb prevents evaporation of fuel saving gas and money.
Attwood Fuel Connector Universal, Brass For 3/8" Hose, 1/4" Npt - 14540-6 - 23-145406F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 3/8" Barb - 14534-6 - 23-145346F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 1/4" Npt - 14530-6 - 23-145306F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 3/8" Barb - 2557581 - 23-89026F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 1/4" Npt - 2557216 - 23-89016F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Molded Acetal 3/8" Barb - 2556851 - 23-89006F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Chrysler/Force Nickel Plated Brass 5/16" Barb - 2551008 - 23-88846F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fold Up Trailer Jack, 1500 Lb. - 11126-4 - 23-111264F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fold Up Trailer Jack, 1000 Lb. - 23-111274 - 23-111274F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fold Up Drink Holder White - 200702 - 23-24497F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Drink Holder Black - 199241 - 23-24457F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Down Aluminum Dock Cleat, 8" - 12049-4 - 23-120494F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Down Aluminum Dock Cleat, 6" - 12048-4 - 23-120484F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Flush Mount Transom Light Round - 6356D7 - 23-6356D7F1
Stainless steel with plastic body and watertight lamp socket. Provide 2-mile visibility for craft up to 164' in length. 7-1/2 watt lamp and two stainless steel #10 screws included. Model 6356 has a translucent back so it can also be used to light an interior compartment. Uses #90 replacement bulb.
Attwood Flush Hinge, Square End, Stamped Stainless Steel 2-3/4" X 1-9/16" - 66239-3 - 23-662393F1
Unique double stud design allows for a flush installation while providing a full 180° swing. This makes them the perfect hinge for lazzerette or fish box covers in the cockpit sole. Made of solid stamped stainless steel.
Attwood Flush Cleat 8" - 66524-1 - 23-665241F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 6" - 66516-7 - 23-665167F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2", Counter-Sunk - 66510-7 - 23-665107F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2" - 66512-7 - 23-665127F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Base For Sure Grip Rod Holder - 1158245 - 23-50713F1
Fit a variety of mounting surfaces including rails Constructed of extruded aluminum
Attwood Flexible Grab Handle - 58927 - 23-20615F1
Flexible grab handles for flush, flexible mounting. They can be mounted to a variety of irregular surfaces and angles on swim platforms, cockpits and companionways. Constructed from soft polypropylene webbing over a semi-rigid core. Available with or without an over-molded grip. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might impact them. They meet the ABYC H-41 standard for strength: withstand a load of 400 lbs. in any direction. All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.
Attwood Flat Gas Spring Mounting Bracket Ball Pem Forward 2 Holes Stainless Steel - Sl40Ssp3-7 - 23-Sl40Ssp37F1
Mounting bracket: pem type: Ball 10mm. direction forward.
Attwood Fender, 8" X 28", White - 2723981 - 23-93581F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", Blue - 9358B1 - 23-9358B1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", White - 9356D1 - 23-9356D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", Blue - 9356Bd1 - 23-9356Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", White - 9355D1 - 23-9355D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", Blue - 9355Bd1 - 23-9355Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
