Select Category
Brands
1-1/4X6 Ss Piano Hinge Polish. - H14-0114P72 - 236-H140114P72F1
Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.
1-1/4X3/4 Bronze Reduce Coupling - 44445 - 38-44445F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Thru-Hull With Nut - Th-125-W - 34-Th125Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Strainer 304 Ss Basket - Arg-1250-S Bspp - 34-Arg1250Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Shut-Off Full Flow Ball Valve - 77-106-10 - 37-7710610F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Shaft Anode, Zinc - Cmx05 - 194-Cmx05F1
Streamlined Shaft Anodes w/Allen Screw
1-1/4" Shaft Anode Ext Heavy, Zinc - Cmx05A - 194-Cmx05Af1
Streamlined Shaft Anodes w/Allen Screw
1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/4" Full Flow Ball Valve, Low Profile - 00Bbv125Lp - 379-00Bbv125Lpf1
Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.
1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/4" Bronze Full Flow In-Line Ball Valve - Ibv-1250 Bspp - 34-Ibv1250Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze 45 Degree Street Elbow - 44206 - 38-44206F1
1-1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Ball Valve W/ Ss Lever - 70-106-10 - 37-7010610F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 5 Brass Pipe Nipple - 40127 - 38-40127F1
1-1/4 X 5 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 3/4 Bronze Hex Bushing - 44517 - 38-44517F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 1 Bronze Reduce Coupling - 44446 - 38-44446F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 1 Bronze Hex Bushing - 44518 - 38-44518F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Sink Drain (10300) - 10300 - 390-10300F1
These sink drains fit all Scandvik sinks except 10280 & 10662. Fit a 2-7/16" drain hole opening.1-1/4" Sink Drain:Includes drain, stopper & chain.
1-1/4 Bronze Pipe Tee - 44256 - 38-44256F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Coupling - 44416 - 38-44416F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Cap - 44476 - 38-44476F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze 90 Deg Street Ell - 44166 - 38-44166F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 90 Deg Pipe/Hose Adapte - 0063Dp7Plb - 9-0063Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/2X6 Ss Piano Hinge Pol. - H14-0112P72 - 236-H140112P72F1
Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.
1-1/2X1-1/4 Bronze Reduce Couplng - 44450 - 38-44450F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Yachtsman Brush - Z112015 - 391-Z112015F1
White China bristle brush, chisel construction, produces a smooth finish with alkyd and oil-based varnishes, marine paints, stains, and urethanes. Round brass-plated steel ferrule; black solid plastic handle.
1-1/2" Y Valve - 45490-1000 - 6-454901000F1
Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.
1-1/2" White Interior/Exterior Light W/Ss Bezel - 6342Ss7 - 23-6342Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.
1-1/2" Water Pipe Deck Plate - 0528Dpwchr - 9-0528Dpwchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Unmarked Pipe Deck Plt - 0528Dp8Chr - 9-0528Dp8Chrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Thru-Hull With Nut - Th-150-W - 34-Th150Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Shut-Off Full Flow Ball Valve - 77-107-10 - 37-7710710F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Scoop Thru-Hull W/Nut - Sth-150-W - 34-Sth150Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Intake Water Strainer - 0493008Plb - 9-0493008Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/2" Gas Pipe Deck Plate - 0528Dpgchr - 9-0528Dpgchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Full Flow Ball Valve, Low Profile - 00Bbv150Lp - 379-00Bbv150Lpf1
Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.
1-1/2" Diesel Pipe Deck Plate - 0528Dpdchr - 9-0528Dpdchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Chrome Plated Bronze Door Hook - 0956Dp1Chr - 9-0956Dp1Chrf1
Chrome plated cast bronze.
1-1/2" Chrome Cap Only F/528 - 0528Dp899A - 9-0528Dp899Af1
For the 528 series deck plates. Chrome plated bronze. Comes complete with O-ring.
1-1/2" Bronze Seacock W/Straight Tail Piece - 0835008Plb - 9-0835008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock W/90° Tail Piece - 0834008Plb - 9-0834008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock Body - 0805008Plb - 9-0805008Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/2" Bronze 45 Degree St Elbow - 44207 - 38-44207F1
1-1/2" Bronze 45 Degree St Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Ball Valve W/ Ss Lever - 70-107-10 - 37-7010710F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" 3-Way Bronze Diverter Valve - 70-607-10 - 37-7060710F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" 233+ Paint Masking Tape - 26338 - 71-26338F1
Highly conformable tape provides outstanding paint lines.
1-1/2 X-Long Thru Hull-White - Th1502Xlb - 232-Th1502Xlbf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
1-1/2 X 3/4 Bronze Hex Bushing - 44522 - 38-44522F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 3-1/2 Brass Pipe Nipple - 40144 - 38-40144F1
1-1/2 X 3-1/2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 1-1/4 Bronze Hex Bushing - 44524 - 38-44524F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 1-1/2 Rem Pin Hinges, 4 Hole #8 Fastener, 1 Pr. - 1293Dp2Chr - 9-1293Dp2Chrf1
Removable Pins.
1-1/2 X 1 Bronze Hex Bushing - 44523 - 38-44523F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Thru Hull Connection C - 0350008Dpc - 9-0350008Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/2 Thru Hull Connection - 0328Dp8 - 9-0328Dp8F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/2 Striker Base Flush Mt. - F16-0150-F - 236-F160150Ff1
Features 12 locking positions with hex nut design. Made with Type-316L Stainless Steel. Will fit both port and starboard bases. Welded locking adapter for maximum strength. Removable arms for unobstructed decks. Fits 12' & 15' standard tele-outriggers. 45° gunnel mount base. 3 Year warranty.
1-1/2 Sani Hose White Rubber - 1021124 - 606-1021124F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
1-1/2 Sani Hose Black Rubber - 1011124 - 606-1011124F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
1-1/2 R.H. Vac Cuff - 16-147-1120 - 88-1471120F1
Provides added clamping protection for Shields vac hose. For watertight seal apply with sealing compound. SHI 1471120 is heavy-duty.
1-1/2 Heritage Badger Brush - 16055-112 - 130-16055112F1
Soft badger-style brush. Pure China bristle. Unlacquered hardwood peg handle. Epoxy set in stainless steel ferrule. Hand formed chisel to preserve natural soft flagg tips. Extra fine tip. Excellent tipping off brush for Awl-Grip. Made in USA.
1-1/2 Bronze Pipe Tee - 44257 - 38-44257F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Coupling - 44417 - 38-44417F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Cap - 44477 - 38-44477F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze 90 Deg Street Ell - 44167 - 38-44167F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 90 Deg Pipe/Hose Adapte - 0063Dp8Plb - 9-0063Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/16X6 Ss Piano Hinge Anneal - H14-0116A72 - 236-H140116A72F1
Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.
1 X 60' White Lt. Duty Safety Walk - 7743 - 71-07743F1
Light DutyFine textured slip resistant polymer, has many uses on and around boats, including trailers, boarding ladders, swim platforms, stairs, showers and cockpits.
1 X 60' Black Med. Duty Safety Walk - 7736 - 71-07736F1
Medium DutyAnti-slip tape offers excellent traction enhancement. Used around barefoot or deckshoe areas such as trailers, decks, docks, ladders, stairs and cockpits
1 X 3/8 Bronze Hex Bushing - 44511 - 38-44511F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3/4 Bronze Hex Bushing - 44513 - 38-44513F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3 1/2 Brass Pipe Nipple - 40-104 - 38-40104F1
Nipple Brass 1 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 1/2 Bronze Hex Bushing - 44512 - 38-44512F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Urethaner Brush - 30521 - 130-30521F1
100% White China bristle. Hand formed chisel. Epoxy set in nickel plated, rust resistant ferrules. Solvent resistant molded polyfoam handle. Thick, short, stocky design makes this brush great for production application of marine urethanes. Made in the USA.
1 Thru Hull Connection Plb - 0350006Dpp - 9-0350006Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Chr - 0350006Dpc - 9-0350006Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Bulk - 0328Dp6 - 9-0328Dp6F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
