Sea-Dog Line
Sea-Dog 337391 Louvered Vent, White, A:3-11/16" , B:4-1/4", C:4-7/8", D:5-1/2", #8 Fh - 337391-1 - 354-3373911F1
Injection molded ABS.
Sea-Dog 337390 Louvered Vent, Black,A:3-11/16" , B:4-1/4", C:4-7/8", D:5-1/2", #8 Fh - 337390-1 - 354-3373901F1
Injection molded ABS.
Sea-Dog 3373811 Louvered Vent, White, A: 1-7/8", B:4-1/4", C:3", D:5-1/2",#8 Fh - 337381-1 - 354-3373811F1
Injection molded ABS.
Sea-Dog 3373801 Louvered Vent, Black, A: 1-7/8", B:4-1/4", C:3", D:5-1/2", #8 Fh - 337380-1 - 354-3373801F1
Injection molded ABS.
Sea-Dog 337320 Thru Vent, Black - 337320 - 354-337320F1
Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches.
Sea-Dog 3373161 Flush Hose Vent, A: 2-13/16" , B:2-3/4", C:3-11/16", D:5/16", Hose/ Hole Size: Up To 3", Black - 337326-1 - 354-3373261F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3373161 Flush Hose Vent, 3" Hose, A: 2-13/16", B: 2-3/4", C:3-11/16", D:5/16" ,Hose/ Hole Size : Up To 3", White - 337316-1 - 354-3373161F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337310 Thru Vent, White - 337310 - 354-337310F1
Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches.
Sea-Dog 3371981 Deck Plate Lanyard - 337198-1 - 354-3371981F1
12" Lanyard is designed to retain deck plate lids. Fits all Sea-Dog® Deck Plates. Constructed of corrosion resistant 304 stainless steel. Attaches to lid with #6 RH fastener (included) and to the interior hull with a #10 RH fastener (not included).
Sea-Dog 337165Bulk Screw Out Deck Platet, 6 Black - 337165 - 354-337165Bulkf1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3371651 Screw Out Deck Plate, 6" Black - 337165-1 - 354-3371651F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337162 Screw Out Deck Plate With Internal Collar, 6-1/2", White - 337162 - 354-337162F1
Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.
Sea-Dog 337161 White Screw Out Deck Plate W/Clear Cover, 6-1/2" - 337161-1 - 354-3371611F1
The Sea-Dog® Screw-Out Deck Plate is constructed with UV stabilized injection molded ABS and feature a clear polycarbonate lid, allowing visual inspection of the watertight compartment without removing the lid. When installing, use silicone sealant on hull or deck surface. Lubricate with Vaseline or Teflon grease. Keep threads clean with hot, soapy water. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvent.
Sea-Dog 3371601 Screw Out Deck Plate, 6" White - 337160-1 - 354-3371601F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3371551 Screw Out Deck Plate, 5" Black - 337155-1 - 354-3371551F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337155 Screw Out Deck Plate, 5" Black - 337155 - 354-337155F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337152 Screw Out Deck Plate With Internal Collar, 5-1/2", White - 337152 - 354-337152F1
Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.
Sea-Dog 3371501 Screw Out Deck Plate, 5" White - 337150-1 - 354-3371501F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337146 Black Screw Out Deck Plate W/Clear Cover, 4-1/2" - 337146-1 - 354-3371461F1
The Sea-Dog® Screw-Out Deck Plate is constructed with UV stabilized injection molded ABS and feature a clear polycarbonate lid, allowing visual inspection of the watertight compartment without removing the lid. When installing, use silicone sealant on hull or deck surface. Lubricate with Vaseline or Teflon grease. Keep threads clean with hot, soapy water. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvent.
Sea-Dog 3371451 Screw Out Deck Plate, 4" Black - 337145-1 - 354-3371451F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337142 Screw Out Deck Plate With Internal Collar, 4-1/2", White - 337142 - 354-337142F1
Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.
Sea-Dog 3371401 Screw Out Deck Plate, 4" White - 337140-1 - 354-3371401F1
Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3364131 Low Profile Pop-Out Deck Plate, A: 8" , B:7-1/4", C=6-1/4", D: 3/16", Black, #8 Fh - 336413-1 - 354-3364131F1
Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).
Sea-Dog 3364121 Low Profile Pop-Out Deck Plate, A: 8" , B:7-1/4", C=6-1/4", D: 3/16", White, #8 Fh - 336412-1 - 354-3364121F1
Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).
Sea-Dog 3364111 Low Profile Pop-Out Deck Plate, A: 6" , B:5-1/4", C=4-1/8", D: 3/16", Black, #8 Fh - 336411-1 - 354-3364111F1
Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).
Sea-Dog 3364101 Low Profile Pop-Out Deck Plate, A: 6" , B:5-1/4", C=4-1/8", D: 3/16", White, #8 Fh - 336410-1 - 354-3364101F1
Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).
Sea-Dog 3316011 Drain Cover, 2-1/2" - 331601-1 - 354-3316011F1
Stamped 304 StainlessVent Area .85 Sq. In.Fasteners: #6 RH
Sea-Dog 331600 Drain Cover, 3-1/4" - 331600-1 - 354-3316001F1
Stamped 304 StainlessVent Area 2.11 Sq. In.Fasteners: #6 RH
Sea-Dog 331455 Butterfly Vent - Side Knob, 5" - 331455 - 354-331455F1
Constructed of corrosion resistant 304 stainless steel. Promote air flow helping to preventing mold and mildew. Features a side knob that allows for easy adjustment of the opening. Fasteners sold separately.
Sea-Dog 331440 Butterfly Vent - Center Knob, 4" - 331440-1 - 354-3314401F1
Constructed of corrosion resistant 304 stainless steel these butterfly vents promote air flow to prevent mold, mildew and associated odors. Features a center knob that allows for easy adjustment of the opening.
Sea-Dog 3314251 Round Louvered Vent, 5" - 331425-1 - 354-3314251F1
Constructed of corrosion resistant stamped 304 stainless steel these round air ventilation louvers allow air in while keeping water out. Installs with four #6 FH fasteners (not included).
Sea-Dog 331424 Round Louvered Vent, 4" - 331424 - 354-331424F1
Constructed of corrosion resistant stamped 304 stainless steel these round air ventilation louvers allow air in while keeping water out. Installs with four #6 FH fasteners (not included).
Sea-Dog 331296 Collector Box, 3" Hose, Left Mount - 331296 - 354-331296F1
Constructed of impact resistant vacuum formed ABS for use with a louvered vent to facilitate air intake and exhaust.
Sea-Dog 331280 Stainless Louvered Vent, 10-Louver - 331280 - 354-331280F1
Stamped 316 Stainless Steel. 331280 does not have a collector box available.
Sea-Dog 331204 Collector Box - 331204 - 354-331204F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342.
Sea-Dog 331203 Collector Box - 331203 - 354-331203F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331203 can accept the 337600 3" collector box hose adapter.
Sea-Dog 331202 Collector Box - 331202 - 354-331202F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331202 is available without holes to allow for custom installations.
Sea-Dog 331201 Stainless Recessed Louvered Vent - 331201 - 354-331201F1
Corrosion resistant 316 stainless steel. Use with a collector box to facilitate air intake and exhaust. Designed with recessed louvers to create a flush vent surface area reducing possible damage to the vent as well as preventing chafing to mooring lines, fishing lines, etc.
Sea-Dog 331200 Stainless Louvered Vent - 331200 - 354-331200F1
Corrosion resistant 316 stainless steel vents are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs w/six #6 RH fasteners (not included).
Sea-Dog 3299701 Cap & Chain For Uhf Coax Connector - 329970-1 - 354-3299701F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299551 Right Angle Uhf Coax Connector - 329955-1 - 354-3299551F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299511 Double Female Bulkhead Uhf Coax Connector - 329951-1 - 354-3299511F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299501 Pl-258 Double Female In-Line Uhf Coax Connector - 329950-1 - 354-3299501F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 329906 Ug176U Uhf Coax Adapter - 329906-1 - 354-3299061F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 329905 Ug175U Uhf Coax Adapter - 329905-1 - 354-3299051F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299021 Pl-259/Ug176U Male Uhf Coax Connector - 329902-1 - 354-3299021F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299011 Pl-259/Ug175U Male Uhf Coax Connector - 329901-1 - 354-3299011F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299001 Pl-259 Male Uhf Coax Connector - 329900-1 - 354-3299001F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 329808 50' Coaxial Cable Assembly - 329808-1 - 354-3298081F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298061 20' Coaxial Cable Assembly - 329806-1 - 354-3298061F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298041 Coaxial Cable Assembly, A:10", B: 2", C:1-3/4", D:11/16", - 329804-1 - 354-3298041F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298021 5' Coaxial Cable Assembly - 329802-1 - 354-3298021F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3295171 Fixed Antenna Base, A: 1-1/2", B:3", C: 2-1/4", 1/4" Rh - 329517-1 - 354-3295171F1
Flange mount fixed antenna bracket. Formed 304 stainless steel construction. Designed to allow wire to feed directly through the base eliminating the need for a separate cable grommet. Ideal for TV, Loran, GPS and VHF antenna's with standard 1"-14 threads. Installs with three ¼" RH fasteners (not included).
Sea-Dog 3295151 Fixed Antenna Base, A: 4-1/4", B: 3", C: 2-1/4", 1/4" Rh - 329515-1 - 354-3295151F1
Flange mount fixed antenna bracket. Formed 304 stainless steel construction. Designed to allow wire to feed directly through the base eliminating the need for a separate cable grommet. Ideal for TV, Loran, GPS and VHF antenna's with standard 1"-14 threads. Installs with three ¼" RH fasteners (not included).
Sea-Dog 329235 Heavy Duty Adjustable Antenna Base - 329235-1 - 354-3292351F1
Investment Cast 316 Stainless Steel. For use with over-height whips or where extra strength and rigidity are required. Dual swiveling mounts allow for complete adjustability. Accepts any standard antenna with 1"- 14 threads.
Sea-Dog 3281971 Nylon Flagpole Pennant Mounts & Stainless Clips, 4/Set - 328197-1 - 354-3281971F1
Nylon adjustable flag pole mount clip used in conjunction with stainless steel spring wire quick release clip can be positioned and repositioned on a flag pole allowing mounting flexibility for a variety of flag or pennant sizes. Stainless spring clips are designed to hold their shape after continued use.
Sea-Dog 3281951 Stainless Flag Pole Hole Mount Pennant Clips, 4/Set - 328195-1 - 354-3281951F1
Stainless spring wire quick release clips are designed to hold their shape after continued use.
Sea-Dog 3281901 Flag Clips For 1/2" Dia Pole, Pr. - 328190-1 - 354-3281901F1
Flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips
Sea-Dog 328160 Hawse Pipe - 328160-1 - 354-3281601F1
Designed to protect the boats hull against damage from anchor line and chain while also reducing rope chafe. Investment cast 316 stainless steel construction for corrosion resistance and durability. Installs with four fasteners (not included).
Sea-Dog 328050 Short Bow Roller - 328050 - 354-328050F1
Investment Cast 316 Stainless Steel body & wheel.
Sea-Dog 3272001 Fender Mate, 1 Pr. - 327200-1 - 354-3272001F1
Fendermate is the latest in fender brackets constructed of marine grade, reinforced injection molded nylon. Clamps securely on both 7/8" and 1" round tubing and 3/16" and 1/4" life line wire. Unique double locking action locks the clamp on the rail or wire while still allowing full adjustment of the height of the fender. When the proper height is reached, the final locking action clamps the rope quickly and securely.
Sea-Dog 3271911 Rail Mount Bracket - Round, For 1-1/8" - 1-1/4" Rail, Black - 327191-1 - 354-3271911F1
Injection Molded Nylon/Stainless Steel Screws.
Sea-Dog 3271901 Rail Mount Bracket - Round, For 7/8" - 1" Rail, Black, 2/Pk - 327190-1 - 354-3271901F1
Injection Molded Nylon/Stainless Steel Screws.
Sea-Dog 327151 Rail Mount Motor Bracket,, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", Black - 327151 - 354-327151F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 3271501 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150-1 - 354-3271501F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. The two-piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc.
Sea-Dog 327150 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150 - 354-327150F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 327135 Rail Mount Horseshoe Buoy Bracket - 327135-1 - 354-3271351F1
Can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware to mount on tubing. Made from marine grade stamped aluminum and powder coated for a long lasting finish.
Sea-Dog 3271121 Rail Mount Fairlead With Stainless Insert - 327112-1 - 354-3271121F1
Includes a nylon fair lead with stainless insert. Allows easy routing of roller furling lines. The stainless insert allows use of wire lines if necessary. Fits 7/8" - 1" railing.
Sea-Dog 3271111 Rail Mount Cleat - 327111-1 - 354-3271111F1
Includes a Heavy Duty Black Nylon Cleat. Ideal for easy attachment of fender, flag halyards, canvas tie downs and related accessories.
Sea-Dog 327105 Rail Mount Brackets W/Screws, White, 1 Pr. - 327105-1 - 354-3271051F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 327101 Rail Mount Brackets W/Oval Plates, Black, 1 Pr. - 327101-1 - 354-3271011F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 3271001 Rail Mount Brackets W/Screws, Black, 1 Pr. - 327100-1 - 354-3271001F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 3265803 Fillet Table, 20" W X 12-5/8" D, Table Only - 326580-3 - 354-3265803F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high-density polypropylene constructionEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not includedDoes Not Include Mounting Hardware
Sea-Dog 3265353 Fillet & Prep Table Square Rail Mount, A:30", B:12-5/8", C:13-1/2", D:2-3/8", Large, Fits Tubing: 1"-1-1/4" - 326535-3 - 354-3265353F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265303 Fillet & Prep Table Square Rail Mount, A:20", B:12-5/8", C 13-1/2", D:2", Medium, Fits Tubing: 1"-1-1/4" - 326530-3 - 354-3265303F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265253 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2-3/8", Large, 3/4"-1-1/4" - 326525-3 - 354-3265253F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265203 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2", Medium, 3/4"-1-1/4" - 326520-3 - 354-3265203F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3256241 4-Rod Storage Rack - 325624-1 - 354-3256241F1
Constructed of extremely durable, high-strength UV resistant polypropylene. For horizontal and overhead installation. Rods are secured with bungee cord attachment. Installs with twelve #8 FH fasteners (included).
Sea-Dog 325168 Flush Mount Rod Holder W/Stainless Top - 325168-1 - 354-3251681F1
Constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Sea-Dog 3250651 Narrow Gunnel Rod Holder W/Stainless Top - 325065-1 - 354-3250651F1
This Narrow Gunnel Flush Mount Rod Holder with Stainless Top is designed for narrow gunnel applications. Accommodates rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV resistant injection molded ABS with highly polished investment cast 316 stainless top. Installs with three #10 FH fasteners (not included).
Sea-Dog 325041 Pvc Clips For Track Rod Holder - 325041 - 354-325041F1
Designed to hold fishing rods in the toughest conditions. Track sold separately
Sea-Dog 3222701 Ladder Locks, Chrome - 322270-1 - 354-3222701F1
Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Installs with eight #10 FH fasteners (not included). Highly polished chrome.
Sea-Dog 321850 Chain Gripper Plate - 321850-1 - 354-3218501F1
Stabilizes anchor chain and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Sea-Dog® Bow Shackles (147212) for connecting lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16" and 1/2".
Sea-Dog 321805 Stainless Steel Hinged Chain Deck Pipe - 321805 - 354-321805F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Sea-Dog 3216601 Hatch Spring - 321660-1 - 354-3216601F1
Formed 304 Stainless Steel.
Sea-Dog 3216501 Hatch Spring - 321650-1 - 354-3216501F1
The Sea-Dog Stainless Steel Hatch Spring has an internal wire that prevents the spring from being overextended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and overextend.
Sea-Dog 3215991 Gas Lift Rod End Fitting - 321599-1 - 354-3215991F1
Unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings. Self-cleaning orifice.
Sea-Dog 3215861 Gas Lift Ball Stud-10Mm - 321586-1 - 354-3215861F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 321586 Gas Lift Ball Stud - 10Mm - 321586 - 354-321586F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215831 Flush Gas Lift - 321583-1 - 354-3215831F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215821 90° Gas Lift Mount-Mount-Wide - 321582-1 - 354-3215821F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215811 90° Gas Lift Mount-Narrow - 321581-1 - 354-3215811F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 321492 Gas Filled Lift Spring - 321492-1 - 354-3214921F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321488 Gas Filled Lift Spring - 321488-1 - 354-3214881F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214861 Gas Filled Lift Spring - 321486-1 - 354-3214861F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214841 Gas Filled Lift Spring - 321484-1 - 354-3214841F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214831 Gas Filled Lift Spring - 321483-1 - 354-3214831F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321482 Gas Filled Lift Spring - 321482-1 - 354-3214821F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
