Sea-Dog Line
Prop Wrench - 531112 - 354-531112F1
Outboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine's service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water.
Power Socket W/Battery Clips - 426450-1 - 354-4264501F1
Power Socket with Battery Clips is constructed of injection molded nylon and stamped brass. Battery clip adapter allows for the temporary use of 12V power accessories on small boats without a built-in power socket. Features 6' lead and color coded clips to avoid polarity misidentification.
Power Socket Shell - 426100-1 - 354-4261001F1
Injection molded ABS. Fits all Sea-Dog Line power sockets.
Power Socket Complete - 12 Vol - 426112-1 - 354-4261121F1
Power Socket with Plug easily adds 12V power almost anywhere. Socket set is constructed of injection molded nylon & ABS. Plug features stamped brass contacts. Maximum: 12VDC, 16A. Installs with two #8 FH fasteners (not included).
Power Socket - Plug Only - 426114-1 - 354-4261141F1
Plug features stamped brass contacts. Maximum: 12VDC, 16A.
Power Socket - 12 Volt (Socket - 426113-1 - 354-4261131F1
Adds 12V power almost anywhere. Socket is constructed of injection molded nylon & ABS. Maximum: 12VDC, 16A. Installs with two #8 FH fasteners (not included).
Poly. Rocker-3 Pos. Illum. - 420258-1 - 354-4202581F1
These Illuminating Rocker Switches are constructed of durable injection molded nylon and stamped brass. Illuminates in the ON position. Easy to install by simply snapping into a standard 7/8" x 1-7/16" panel slot, with wiring for 1/4" blade terminals. 15A @ 12VDC.
Poly In-Line Strainer, 5/8" - 364136 - 354-364136F1
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction side of pump.
Poly In-Line Strainer, 3/4" - 364137 - 354-364137F1
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction side of pump.
Poly In-Line Strainer, 1/2" - 364135 - 354-364135F1
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction side of pump.
Poly 4-Position Key Switch W/C - 420375-1 - 354-4203751F1
Four Position Ignition Switch is constructed of polypropylene. For accessory, off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Four screw or four blade terminal electrical configurations. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys.
Poly 3-Position Key Switch W/C - 420382-1 - 354-4203821F1
Three Position Magneto Style Ignition Switch is constructed of polypropylene. For off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Six screw or five screw plus one boss terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Includes two keys. Push to choke.
Polarized 4-Pin Electrical Connector - 426234-1 - 354-4262341F1
Polarized Electrical Outlet is constructed with an injection molded thermo plastic body and cap, with machined brass polarized pins. For use as a 4-conductor deck cable outlet. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues. 5A. 12 or 24VDC. Installs with two #6 FH fasteners (not included).
Plugmate Garboard Wrench - 520045-1 - 354-5200451F1
The Plugmate™ wrench features multiple deck keys. Fits standard garboard plugs as well as "T" style plugs. Constructed of durable injection molded polypropylene. Includes one replacement plug stored in handle
Pitot Tube Shield - 331310-1 - 354-3313101F1
Vertically mounted, this will protect cables and electrical wiring on items such as depth sounders, speedometers and coax when passing through transom holes. 304 stainless steel. Carded.
Oarlock Horns - 580411-1 - 354-5804111F1
Oarlocks are ideal for light service duty. 1/2" shank. Recommended for freshwater use. Die cast chrome plated zinc construction.
Oarlock Bushings - 582059-1 - 354-5820591F1
Injection molded polypropylene. Reduces 5/8" oarlock socket down to 1/2".
Nylon Windshield Double Latch - 324210-1 - 354-3242101F1
Constructed of UV resistant black injection molded nylon. These Windshield Latches are used to secure windshield doors with a simple twist design. Prevents rattling due to engine vibration at high speeds.
Nylon Top Fitting P.O.P. Display - 916012 - 354-916012F1
A complete selection of nylon top fittings for repair and new tops.
Nylon Square Tube Top - 273580 - 354-273580F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Nylon Head Screw-1/4"-20 X 7, Black Pr. - 273298-1 - 354-2732981F1
Nylon Head Screw-1/4"-20 X 7/8", Black Pr
Nylon Head Screw-1/4" -20 X 7/8", White Pr. - 273299-1 - 354-2732991F1
Nylon Head Screw-1/4" -20 X 7/8", White Pr
Nylon Garboard Drain - 520050-1 - 354-5200501F1
Molded nylon. Drain tube 1-1/8".
Nylon Fairlead W/Stainless Insert - 82615 - 354-082615F1
Constructed of injection molded nylon fairleads designed with a molded-in recess in the base to trap adhesive sealant in place providing a more watertight seal. This fairlead has the addition of a stainless steel liner for superior wear performance. Used for control lines, the stainless insert allows some directional control as well as the use of wire rope rigging in straight run applications. Installs with two #10 RH fasteners (not included)
Nylon Drain Plug (Press Fit) - 520030 - 354-520030F1
Molded nylon. Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal.
Nylon Drain Plug - 520010-1 - 354-5200101F1
This Drain Plug was designed with a molded-in recess in the base to trap sealant and provide a more watertight seal. For transom installation, baitwells, ice chests, tanks, etc. 1" with gasket. UV resistant injection molded nylon construction. Fits many RIBs and small boats.
Nylon Drain Plug - 520010 - 354-520010F1
This Drain Plug was designed with a molded-in recess in the base to trap sealant and provide a more watertight seal. For transom installation, baitwells, ice chests, tanks, etc. 1" with gasket. UV resistant injection molded nylon construction. Fits many RIBs and small boats.
Nylon Deck Hinge(Black) - 273200-1 - 354-2732001F1
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings install with two #10 FH fasteners (not included). 3/16" pin size.
Nylon Circuit Breaker Panel - - 425800-1 - 354-4258001F1
The Wave Rocker Switch Breaker Panel is constructed of injection molded nylon. Features five ignition protected, illuminating SPST On/Off rocker switches and five thermal resettable breakers (two 3A, two 5A, one 8A, and one 10A). Individual circuit 10A max. 30A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Label decals are back lit with green LEDs. Installs with six fasteners (not included).
Nylon Cable Clamp, 3/8 X 1/2 - 428237-2 - 354-4282372F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Cable Clamp-3/8 X 5/16 - 428234-2 - 354-4282342F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Cable Clamp-3/8 X 3/8 - 428235-2 - 354-4282352F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Cable Clamp-3/8 X 3/16 - 428232-2 - 354-4282322F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Cable Clamp-3/8 X 1/4 - 428233-2 - 354-4282332F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Cable Clamp-1/2 X 5/8 - 428259-2 - 354-4282592F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Cable Clamp-1/2 X 3/4 - 428261-2 - 354-4282612F1
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating: -40°F to 185°F. Flammability Rating: UL 94 V-2L.
Nylon Angled Deck Hinge(Black) - 273230-1 - 354-2732301F1
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings install with two #10 FH fasteners (not included). 3/16" pin size.
Nylon Adjustable Folding Drink - 588221-1 - 354-5882211F1
Folding Drink Holder folds to a closed depth of 15/16". Accommodates drink containers up to 2-3/4 in diameter. Impact resistant injection molded ABS construction. Installs with four #6 FH fasteners (not included). Available in black or white.
Nylon Adjustable Folding Drink - 588220-1 - 354-5882201F1
Folding Drink Holder folds to a closed depth of 15/16". Accommodates drink containers up to 2-3/4 in diameter. Impact resistant injection molded ABS construction. Installs with four #6 FH fasteners (not included). Available in black or white.
Narrow Gunnel Rod Holder, White - 325061-1 - 354-3250611F1
These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Featuring a 30° angle they are designed for narrow gunnel applications while accommodating rods up to 1-5/8". Installs with three #10 FH fasteners (not included).
Narrow Gunnel Rod Holder, Black - 325060-1 - 354-3250601F1
These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Featuring a 30° angle they are designed for narrow gunnel applications while accommodating rods up to 1-5/8". Installs with three #10 FH fasteners (not included).
Multi-Tool - 563151-1 - 354-5631511F1
This handy multi-tool is made from 304 stainless steel. It includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file and a saw. Canvas carrying case included. 304 Stainless.
Motorwell Drain Tube - 520323-1 - 354-5203231F1
Molded heavy-duty plastic. Carded.
Motorwell Drain Tube - 520320-1 - 354-5203201F1
Molded heavy-duty plastic. Carded.
Motor Well Boot-5 1/2 - 521655 - 354-521655 Superseded By: 354-5216551F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Mooring Snap - Plated Steel - 155841-1 - 354-1558411F1
These mooring snap hooks are constructed of nickel plated malleable cast steel. Spring-loaded closure for quick and easy connections. With a breaking strength of 1,600 lbs. they are suitable for many uses including mooring buoy and anchoring applications.
Momentary Push Button Switch, Carded - 420420-1 - 354-4204201F1
This universal Momentary Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. Switch options include: No cap, a standard black waterproof cap, or a bright red waterproof cap to make it easily identifiable in emergency situations. Maximum panel thickness: 1". 15A @ 12VDC.
Momentary Push Button Switch W/Cover - 420421-1 - 354-4204211F1
This universal Momentary Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. Switch options include: No cap, a standard black waterproof cap, or a bright red waterproof cap to make it easily identifiable in emergency situations. Maximum panel thickness: 1". 15A @ 12VDC.
Momentary Push Button Switch - 420427-1 - 354-4204271F1
This momentary Push Button On/Off switch is constructed of corrosion resistant glass reinforced polyester housing with an elastomeric rubber internal gasket and ultrasonic welding for increased water resistance. Compact behind-dash panel dimensions allow for mounting in confined spaces. 2 Boss copper alloy screw terminal contacts. Overall length: 2-7/8". Mounting stem: 1-7/16L x 5/8"-32 thread. Maximum panel thickness: 1-1/8". 30A @ 12VDC. Includes rubber boot nut.
Mini Single Compact Horn - 431110-1 - 354-4311101F1
Single Mini Compact Horn features a prewired, sealed sound unit with 304 stainless steel diaphragm and stamped 304 stainless cover. Mounting bracket can be used as a wiring template. A drop-in replacement for many common OEM horns. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577059.
Mini Double Compact Horn - 431120-1 - 354-4311201F1
Twin Mini Compact Horn features a prewired, sealed sound unit with 304 stainless steel diaphragm and stamped 304 stainless cover. Mounting bracket can be used as a wiring template. A drop-in replacement for many common OEM horns. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490°20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577061.
Mini Blade Fuse - Mixed Kit - 445090-1 - 354-4450901F1
Kit contains 5ea: 3, 5, 7.5, 10, 15 and 20 amp fuses.
Merc. Push-To-Choke 3Pos. - 420381-1 - 354-4203811F1
Three Position Magneto Style Ignition Switch is constructed of polypropylene. For off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8". Six screw or five screw plus one boss terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Includes two keys. Push to choke.
Medium Screw Base Light Bulb - 441027-1 - 354-4410271F1
General purpose incandescent Medium Screw Base Light Bulb features an Edison-style, single contact brass base. Heavy duty glass bulb housing and filament for break resistance and longevity. 15W. 12.8VDC.
Max Blast Mini Compact Horn - 431115-1 - 354-4311151F1
MaxBlast Single Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440-20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577060.
Manual Windshield Wiper - 412601-1 - 354-4126011F1
Manual Windshield Wiper includes an 8"-12" adjustable wiper arm (410051) and 11" blade (411151). This hand operated wiper is an economical alternative to traditional wiper motors. Chrome plate machined brass and stainless steel construction.
Malleable Snap Hook, Carded - 155812-1 - 354-1558121F1
These utility snap hooks are constructed of nickel plated malleable cast steel.
