Sea-Dog Line
Heavy Duty Zinc Plated Steel Clamp-On Oar Lock, Pair, 1/2" Shaft - 582070-1 - 354-5820701F1
Heavy Duty Clamp-On Oarlocks are easy to install. The bolted clamp is adjustable to fit most standard oars. Straight 2" long shank. Recommended for freshwater use. Constructed of heavy gauge zinc plated steel.
Heavy Battery Box Strap - 415082-1 - 354-4150821F1
Heavy Duty Battery Box Strap includes a woven polypropylene strap, stainless steel buckle, two chrome plated brass brackets, and four #8 FH fasteners.
Hatch Latch - 321000-1 - 354-3210001F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Halogen Floodlight With - 405115-1 - 354-4051151F1
This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.
Gas Tank 1" X 6' Strap, 304 Stainless Steel Hardware - 359995-1 - 354-3599951F1
For use in securing a portable gas tank. Gas Tank Strap kit includes: 1" x 6' nylon webbing strap with 304 stainless steel buckle, two 304 stainless steel footman's loops, and four #10 FH fasteners.
Garboard Drain Plug - 520042-1 - 354-5200421F1
Die cast bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square T-top for manual tightening or removal. Installs with three #10 FH fasteners (not included).
Galvanized Coupler Locking Pin - 751011-1 - 354-7510111F1
Square Coupler Pins add an additional level of security, preventing accidental uncoupling while in transit to better protect your trailer. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes. Constructed of electro-galvanized steel for corrosion resistance.
Galvanized Coupler Locking Pin - 751010-1 - 354-7510101F1
Square Coupler Pins add an additional level of security, preventing accidental uncoupling while in transit to better protect your trailer. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes. Constructed of electro-galvanized steel for corrosion resistance.
Galvanized Cleat, 8" - 40108 - 354-040108F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 8" - 040108-1 - 354-0401081F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 6" - 40106 - 354-040106F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 6" - 040106-1 - 354-0401061F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 5" - 40105 - 354-040105F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 4" - 40104 - 354-040104F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 3-1/2" - 40103 - 354-040103F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 14" - 40114 - 354-040114F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 12" - 40112 - 354-040112F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 10" - 40110 - 354-040110F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Anchor Shackle-5/16" - 147808-1 - 354-1478081F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-5/16 - 147808 - 354-147808F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-3/8" - 147810-1 - 354-1478101F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-3/8 - 147810 - 354-147810F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-1/4" - 147806-1 - 354-1478061F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle 7/16" - 147811 - 354-147811F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle 1/2" - 147812-1 - 354-1478121F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Fuse Holder - Spade Terminal - 420504-1 - 354-4205041F1
AGC Round Fuse Holder with Flush Cap and Spade Terminal is constructed of molded Bakelite with stamped brass contacts and a flush cap. Panel mounted to provide overcurrent protection in electrical circuits. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 15A @ 12VDC. Spade terminal. Fuse not included.
Fuse Holder - 420502-1 - 354-4205021F1
AGC Fuse Holder with Screw-On Cap is constructed of molded Bakelite with stamped brass contacts and a screw-on cap. Panel mounted to provide overcurrent protection in electrical circuits. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 15A @ 12VDC. Solder terminal. Fuse not included.
Fuse Holder - 420501-1 - 354-4205011F1
Push in cap is made of stamped brass and molded bakelite.
Folding Pad Eye Ss 2" - 090145-1 - 354-0901451F1
These corrosion resistant stamped 304 stainless steel D-rings' convenient folding design keeps fittings out of the way when not in use. Multiple applications including rigging, tie-down and securing cargo for storage or transport. Installs with two RH fasteners (not included).
Folding Pad Eye Ss 2-5/8" - 090155-1 - 354-0901551F1
These corrosion resistant stamped 304 stainless steel D-rings' convenient folding design keeps fittings out of the way when not in use. Multiple applications including rigging, tie-down and securing cargo for storage or transport. Installs with two RH fasteners (not included).
Folding Pad Eye Ss 1-1/8" - 090125-1 - 354-0901251F1
These corrosion resistant stamped 304 stainless steel D-rings' convenient folding design keeps fittings out of the way when not in use. Multiple applications including rigging, tie-down and securing cargo for storage or transport. Installs with two RH fasteners (not included).
Flush Pull, White - 227321-1 - 354-2273211F1
Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a more inconspicuous look. Installs with four #6 FH fasteners (not included).
Flush Pull, Gray - 227322-1 - 354-2273221F1
Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a more inconspicuous look. Installs with four #6 FH fasteners (not included).
Flush Pull, Black - 227320-1 - 354-2273201F1
Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a more inconspicuous look. Installs with four #6 FH fasteners (not included).
Flush Mt Drink Holder, White - 588051 - 354-588051F1
Flush Mount Drink Holders accommodate drink containers up to 3-5/8 in diameter and require a 3-3/4" diameter hole for installation. 3" depth. Impact resistant injection molded ABS construction.
Flush Mt Drink Holder, White - 588011 - 354-588011F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 3" depth. Impact resistant injection molded ABS construction.
Flush Mt Drink Holder, White - 588001 - 354-588001F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 2" depth. Impact resistant injection molded ABS construction.
Flush Mt Drink Holder, Black - 588010 - 354-588010F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 3" depth. Impact resistant injection molded ABS construction.
Flush Mount Rod Holder W/Cap - 325175-1 - 354-3251751F1
Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Floodlight-Halogen 12V 55W - 405110-1 - 354-4051101F1
This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.
Flexible Door Catches - 227023-1 - 354-2270231F1
Constructed of sturdy UV resistant injection molded nylon with a stainless steel spring clip. These Flexible Door Catches guarantee ease of alignment and durability in use. Includes 304 stainless adjustable door strike. Installs with two #4 RH fasteners (not included).
Flexible Base Adhesive Stud, 5/Pk - 297123-2 - 354-2971232F1
These flexible base canvas fasteners feature stainless steel snaps or sockets on a flexible acetal polymer which molds to rounded shapes for excellent adhesion. Each piece includes a special VHB (Very High Bond) adhesive for quick and easy attachment.
Flagpole Socket, 3/4" Chrome Brass - 492211-1 - 354-4922111F1
10° Flagpole Socket is used for flagpoles up to 3/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Flagpole Socket, 1" Chrome Brass - 492212-1 - 354-4922121F1
10° Flagpole Socket is used for flagpoles up to 1" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Flag Staff Mound Adj 1Set/Pk - 327194-1 - 354-3271941F1
Round Rail Mount Bracket for use with round flagpoles and is used on 7/8" and 1" tubing. Corrosion resistant, UV stabilized, injection molded nylon. Stainless steel mounting screws included. Use with Sea-Dog® Flagpoles 328112-1 and 328114-1. Maximum speed 10 MPH.
Fixed Boat Hook - 491013-1 - 354-4910131F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Fixed Boat Hook - 491012-1 - 354-4910121F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Fixed Antenna Base - 329510-1 - 354-3295101F1
Flange mount fixed antenna bracket. Investment cast 316 stainless steel construction. Designed to allow antenna wire to feed directly through the base eliminating the need for a separate cable grommet. Base is designed with a recess which, when filled with silicone sealant will form a watertight seal. Ideal for TV, Loran, GPS and VHF antenna's as well as radar arches. For use with standard 1"-14 threads. Installs with three 1/4 FH fasteners (not included).
Fixed Antenna Base - 329500-1 - 354-3295001F1
Flange mount fixed antenna bracket. Corrosion resistant injection molded nylon construction. This low-profile bracket will accept any standard antenna with 1"-14 threads, but is ideal for GPS, Marine TV and other shorter antennas. Installs with three 1/4" RH fasteners (not included).
Fender Hook Chrome/Brass 7/16" Line - 672520-1 - 354-6725201F1
Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. Constructed of chrome plated sand cast brass. Installs with two #8 FH fasteners (not included).
Fender Hook Chrome/Brass 5/16" Line - 672510-1 - 354-6725101F1
Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. Constructed of chrome plated sand cast brass. Installs with two #8 FH fasteners (not included).
Fairlead 5/8" Nylon - 82016 - 354-082016F1
Injection molded nylon with a molded-in recess in the base. This traps the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope.
Fairlead 3/8" Nylon - 82010 - 354-082010F1
Injection molded nylon with a molded-in recess in the base. This traps the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope.
Fairlead 1/2" Nylon - 82051 - 354-082051F1
Injection molded nylon with a molded-in recess in the base. This traps the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope.
Eye Nuts Stainless 5/16"-18 - 78108 - 354-078108F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nuts Stainless 5/16"-18 - 078108-1 - 354-0781081F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nuts Stainless 1/4"-20 - 78106 - 354-078106F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nuts Stainless 1/4"-20 - 078106-1 - 354-0781061F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 8 Mm-1.25 Mm - 78208 - 354-078208F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 3/8"-16 - 78110 - 354-078110F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 3/8"-16 - 078110-1 - 354-0781101F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 10 Mm-1.50 Mm - 78210 - 354-078210F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 1/2"-13 - 78112 - 354-078112F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 1/2"-13 - 078112-1 - 354-0781121F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Electrogalvanized Utility Snap - 155822-1 - 354-1558221F1
Electrogalvanized Forged Steel
Electrogalvanized Steel Anchor Lift & Lock - 328040-1 - 354-3280401F1
Electrogalvanized steel anchor lift and lock system makes it easier to pull up your anchor and locks it in place.
Electrogalvanized Heavy Duty Utility Snap - 155832-1 - 354-1558321F1
These heavy duty utility snap hooks feature a breaking strength of 7,000 lbs. making them ideal for rugged marine applications. Spring-loaded closure for quick and easy connections. Constructed of electro-galvanized formed mild steel for both galvanic and corrosion protection.
Elec. Connector 3 Amp 4 Pin - 426264-1 - 354-4262641F1
Constructed of chrome plated brass. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Elec. Connector 3 Amp 3 Pin - 426263-1 - 354-4262631F1
Constructed of chrome plated brass. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Elastic Shock Cord-24" - 650240-1 - 354-6502401F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Dual/Quad Expanding Drink Holder W/Suction Cups - 588520-1 - 354-5885201F1
Dual/Quad Drink Holder with suction cups expands from dual to quad holders conserving space when not in use. Suction Cups offers a flexible solution, mounting easily to most surfaces. Accommodates drink containers up to 3-1/2" in diameter. Impact resistant injection molded nylon construction..
Drink Holder White Abs - 588211-1 - 354-5882111F1
Injection molded ABS. Folds to a closed depth of 15/16".
Drink Holder Black Abs - 588210-1 - 354-5882101F1
Injection molded ABS. Folds to a closed depth of 15/16".
Drain Plug Chrome On Brass - 520020-1 - 354-5200201F1
This Drain Plug has a molded-in captive mechanism that keeps the plug in the body, but still allows easy plug removal when needed. UV resistant injection molded nylon construction with a chrome plated formed brass base.
Drain Plug - 520030-1 - 354-5200301F1
Molded nylon. Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal.
Door Hook Ss 4" W/2 Staples - 221208-1 - 354-2212081F1
These hook and eye style Two Staple Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Extra staple can be mounted to secure the cabin door in both open and closed positions. Easy to install, simply surface mount with six #8 FH fasteners (not included).
Door Hook Ss 3-1/4" W/Staples - 221207-1 - 354-2212071F1
These hook and eye style Two Staple Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Extra staple can be mounted to secure the cabin door in both open and closed positions. Easy to install, simply surface mount with six #8 FH fasteners (not included).
Door Hook Ss 2-1/2" W/Staples - 221206-1 - 354-2212061F1
These hook and eye style Two Staple Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Extra staple can be mounted to secure the cabin door in both open and closed positions. Easy to install, simply surface mount with six #8 FH fasteners (not included).
Door Hook Ss - 221204-1 - 354-2212041F1
These hook and eye style cabin Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Easy to install, simply surface mount with four #8 FH fasteners (not included).
Door Hook Ss - 221203-1 - 354-2212031F1
These hook and eye style cabin Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Easy to install, simply surface mount with four #8 FH fasteners (not included).
Door Hook Ss - 221202-1 - 354-2212021F1
These hook and eye style cabin Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Easy to install, simply surface mount with four #8 FH fasteners (not included).
Door Hook Chrome/Brass 2" - 222112-1 - 354-2221121F1
Chrome plated brass. Carded.
Door Hinges - 201531-1 - 354-2015311F1
These Door Hinges are constructed of corrosion resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
