Sea-Dog Line
Seadog 413120B1 Adjustable Wiper Arm, Stainless Steel W/Black Finish - 413120B-1 - 354-413120B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog 413054B-1 Premium Wiper Arm For Standard Motors, Black - 413054B-1 - 354-413054B1F1
Formed 304 stainless steel. Premium stainless steel wiper arm for use on standard motors (412321B-3, 412328B-3) and waterproof standard wiper motors (412321W-3, 412328W-3) with 3/8" shaft diameter.
Seadog 405969 Nickel Plated Brass Halogen 12V Flood Light Bulb | 5 Pieces Per Pack - 405969 - 354-405969F1
This is the replacement bulb for models 405610-3 and 405620-3. P43T base type.
Seadog 405950 (2) Stainless 12V 180 Lumens 32 Led Side Mount Docking Lights | #8 Fastener - 405950-1 - 354-4059501F1
Stamped 304 stainless steel. These surface mount LED docking lights have a sleek design and are super bright for excellent vision when docking. Use #8 RH fastener.
Seadog 4056831 Wireless Remote Control - 405683-1 - 354-4056831F1
Allows completely portable remote control of your spotlight.
Seadog 405510 Fiberglass Nylon & Stainless 55 Watt 4.58 Amp 12V Docking Light - 405510 - 354-405510F1
Docking Light is constructed with a fiberglass reinforced injection molded nylon housing for strength and UV resistance and a corrosion resistant stamped 304 stainless steel bracket. H3 style 12V 55W halogen bulb.
Seadog 4053353 Led Rectangular Flood Light, 9-36V - 405335-3 - 354-4053353F1
This marine grade LED Flood Light is constructed with a power coated aluminum housing with a stamped 304 stainless steel bracket. 6 super bright LEDs produce 1500 lumens. Low amp draw. 9-36V. IP67 waterproof rating.
Seadog 4051111 Halogen Flood Light Replacement Bulb, 1/Cd - 405111-1 - 354-4051111F1
Replacement Bulbs for 405110-1, 405115-1, 405120 & 405510, PK22S base type.
Seadog 403066-1 Motion Sensor Switch - 403066-1 - 354-4030661F1
Motion Sensor Switch can be used to activate LED and incandescent lights. The motion detection range is up to 15 feet, with an activation angle of 120°. Activation time is adjustable (10/20/50/70 seconds); factory preset 70 seconds. 2A max. 12-30VDC. IP67 waterproof rating.
Seadog 403060 Stainless 12/24V Multi Color Led Continuous Adjustment Memory Function Dimmer Switch W/On-Off Function - 403060-1 - 354-4030601F1
LED Continuous Adjustment Dimmer Switch is constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 1.5A max. 12/24VDC. IP67 waterproof rating.
Seadog 4018453 Led Mirror Light With Dimmer, Oval - 401845-3 - 354-4018453F1
This LED Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. Works with 12V and 24V systems. Includes three #6 FH fasteners and white hole plugs. CE, RoHS compliant. 3000K, 300 lumens.
Seadog 4018353 Led Mirror Light With Dimmer, 4" Round - 401835-3 - 354-4018353F1
This LED Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. Works with 12V and 24V systems. Includes three #6 FH fasteners and white hole plugs. CE, RoHS compliant. 3000K, 300 lumens.
Seadog 4018173 Led Tear Drop Light With Dimmer - 401817-3 - 354-4018173F1
LED Tear Drop Light features a warm white light with blue accented, touch controlled on/dim/off switch. Touch the center button to turn on and off. Continue to touch button to activate dimmer. Warm white, 3000K, 9 Osram LEDs, 200 lumens @ 3W. Works with 12V and 24V systems. Includes two #6 RH fasteners. CE, RoHS compliant.
Seadog 401757 Plastic 5 Red & 15 White Led Day & Night 12V Dome Light | #8 Fastener | White Finish - 401757-1 - 354-4017571F1
LED Day/Night Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off/on rocker switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog 401679 Stainless White & Red Led 12V Surface Mount Low Profile Day & Night Task Light With On / Off Switch | #6 Fastener - 401679-1 - 354-4016791F1
LED Low Profile Day/Night Task Light is constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Feature 12 LEDs; 8 warm white @ 0.19A (143 lumens) and 4 red @ 0.06A (43 lumens) for night vision. Integral 3-way switch activates by pressing the center of the lens. Switch goes from on-night/off/on-day. Installs with two #6 FH fasteners (not included). 12-28VDC. IP65 rating. CE approved.
Seadog 401676 Stainless 12 Led 12V Surface Mount Low Profile 100 Lumens Task Light With On / Off Switch - 401676-1 - 354-4016761F1
Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Installs with two #6 FH fasteners (not included). 12-28VDC. 12 LEDs @ 0.4A (200 lumens), w/ switch: Activated by pressing the center of the lens. IP65 waterproof rating
Seadog 401666 Stainless 12 Led 12V Surface Mount Low Profile 100 Lumens Task Light With On / Off Switch - 401666-1 - 354-4016661F1
Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Installs with two #6 FH fasteners (not included). 12-28VDC. 6 LEDs @ 0.2A (100 lumens) w/ switch: Activated by pressing the center of the lens. IP65 waterproof rating
Seadog 401665 Stainless 6 Led 12V Surface Mount Low Profile 100 Lumens Task Light - 401665-1 - 354-4016651F1
Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Installs with two #6 FH fasteners (not included). 12-28VDC. 6 LEDs @ 0.2A (100 lumens), w/o switch: IP67 rating.
Seadog 4016471 White Plastic Housing W/Blue Leds, 8 Lumens Courtesy Light - 401647-1 - 354-4016471F1
PlasticRated at 12 VDC#6 Fastener
Seadog 4016271 White Plastic Housing W/White Leds, 8 Lumens Courtesy Light - 401627-1 - 354-4016271F1
PlasticRated at 12 VDC#6 Fastener
Seadog 4016251 Chrome Plastic Housing W/White Leds, 8 Lumens Courtesy Light - 401625-1 - 354-4016251F1
PlasticRated at 12 VDC#6 Fastener
Seadog 401615 Chrome Plastic Housing W/Blue Leds, 8 Lumens Courtesy Light - 401615-1 - 354-4016151F1
Plastic Rated at 12 VDC#6 Fastener
Seadog 4014681 12V Led Strip Light, 6", Red - 401468-1 - 354-4014681F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014671 12V Led Strip Light, 6", Green - 401467-1 - 354-4014671F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014661 12V Led Strip Light, 6", Blue - 401466-1 - 354-4014661F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014651 12V Led Strip Light, 6", White - 401465-1 - 354-4014651F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014501 12V Led Strip Light, 4", White - 401450-1 - 354-4014501F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014481 12V Led Strip Light, 4", Red - 401448-1 - 354-4014481F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014471 12V Led Strip Light, 4", Green - 401447-1 - 354-4014471F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014461 12V Led Strip Light, 4", Blue - 401446-1 - 354-4014461F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014451 12V Led Strip Light, 4, White - 401445-1 - 354-4014451F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 401422 Large Deluxe Led 9-28 Voltage Courtesy Light | Facing Forward | White Finish - 401422-1 - 354-4014221F1
Constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. These lights feature 3 low amperage, long life LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9©28VDC. IP67 waterproof rating.
Seadog 401420 Large Deluxe Led 9-28 Voltage Courtesy Light | Facing Down | White Finish - 401420-1 - 354-4014201F1
Constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. These lights feature 3 low amperage, long life LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9©28VDC. IP67 waterproof rating.
Seadog 401418-1 Led Square Courtesy Light, Blue - 401418-1 - 354-4014181F1
LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8" square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.
Seadog 401417-1 Led Square Courtesy Light, White - 401417-1 - 354-4014171F1
LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8" square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.
Seadog 4014131 Led Alcor Courtesy Light, Blue - 401413-1 - 354-4014131F1
LED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2" diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. 12V.
Seadog 4014121 Led Alcor Courtesy Light, White - 401412-1 - 354-4014121F1
LED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2" diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. 12V.
Seadog 401275 Led Flush Mount Oval Courtesy Light With Stainless Cover | White Finish - 401275-1 - 354-4012751F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Seadog 401270 Led Flush Mount Round Courtesy Light With Stainless Cover | White Finish - 401270-1 - 354-4012701F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Seadog 4007153 Led Cabin/Reading Light W/Touch Dimmer & Usb Port - 400715-3 - 354-4007153F1
LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch and USB port. This light features an adjustable direct beam reading light, as well as ambient light for the cabin. Warm white LED light with blue accented dimmer switch, 3000K Bridgelux bulb provides 270 lumens @ 3W. USB Port: 5V/2A. Constructed of high quality brushed aluminum. Includes two #6 FH fasteners and Allen wrench. CE, RoHS compliant.
Seadog 400710-3 Led Cabin/Reading Light W/Touch Dimmer - 400710-3 - 354-4007103F1
LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch. This light provides a direct beam reading light, as well as ambient light for the cabin. High quality aluminum construction with an adjustable light angle and a warm white, 3000K Cree bulb providing 270 lumens @ 2W. Works with 12V and 24V systems. Includes two #6 FH fasteners and Allen wrench.
Seadog 4002031 Led Dome Light, 6-3/4" Dia. - 400203-1 - 354-4002031F1
LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).
Seadog 4002001 Stainless Steel Dome Light, 12V With On/Off Switch, 6-3/4" Dia. - 400200-1 - 354-4002001F1
These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Pre-wired with an integral on/off toggle switch. Includes an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.
Seadog 4001931 Led Dome Light, 5-1/2" Dia. - 400193-1 - 354-4001931F1
LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).
Seadog 4001901 Stainless Steel Dome Light, 12V With On/Off Switch, 5-1/2" Dia. - 400190-1 - 354-4001901F1
These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Pre-wired with an integral on/off toggle switch. Includes an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.
Seadog 400180 Flush Mount Port & Starboard Side Lights, Stainless, 1 Pr. - 400180 - 354-400180F1
Flush Mount Side Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with four #8 RH fasteners (not included). Approved for USCG 1 NM (A-16). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400165 Top Mount Red Port & Green Starboard Side Lights - 10 Point Light Arc - 400165 - 354-400165F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog 400130 Stern Light | 12 Point Light Arc | #4 Fastener | Stamped 304 Stainless - 400130-1 - 354-4001301F1
135° Stern Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400079 Stainless Led Side Mount Side Navigation Port & Starboard Lights | Uscg 2 Nm Approved | #8 Fastener - 400079-1 - 354-4000791F1
LED Side Mount Side Lights are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel or injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400078 Black Led Side Mount Side Navigation Port & Starboard Lights | Uscg 1 Nm Approved | #8 Fastener - 400078-1 - 354-4000781F1
LED Side Mount Lights are approved for USCG 1 NM (Colreg 1 mile).Constructed of corrosion resistant stamped 304 stainless steel or injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400069 Stainless Led Top Mount Side Navigation Light - Uscg 2 Nm Approved - #8 Fastener - 400069-1 - 354-4000691F1
LED Top Mount Side Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). Includes port and starboard lights. Constructed of stamped 304 stainless steel with an investment cast 316 stainless steel base. Installs with four #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400042 Led All Around Light | Uscg 2 Nm Approved | #12 Rh Fastener - 400042-1 - 354-4000421F1
Fixed mount and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw.
Seadog 400022 Led Masthead Light | Uscg 2 Nm Approved | #12 Fastener - 400022-1 - 354-4000221F1
LED 225° Masthead Lights are fixed mounted and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 4000131 Led Fold Down All Around Light, 24" - 400013-1 - 354-4000131F1
LED Fold Down 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 4000121 Led Fold Down All Around Light, 9" - 400012-1 - 354-4000121F1
LED Fold Down 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 371840 Flush Mount Ski Tow | 3/8" Thread Diameter | Investment Cast 316 Stainless - 371840 - 354-371840F1
Flush mount ski tow designed to give your transom an updated look. Stud centers will allow direct replacement of the most popular standard ski tow. Includes backing plate.
Seadog 3570341 Keyless Deck Fill-Waste - 357034-1 - 354-3570341F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" - 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570331 Deck Fill -Water - 357033-1 - 354-3570331F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 357033 Keyless Deck Fill-Water - 357033 - 354-357033F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570311 Deck Fill - Diesel - 357031-1 - 354-3570311F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570301 Gas Deckfill W/Keyless Cap - 357030-1 - 354-3570301F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570001 Black Nylon Fill Body W/O Cap - 357000-1 - 354-3570001F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3532301 90° Gas Tank Vent, Fits 5/8" Hose, Stainless - 353230-1 - 354-3532301F1
This Flush Mount 90° Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose at a 90° angle. Constructed of corrosion resistant investment cast 316 stainless steel.
Seadog 3522301 90° Gas Tank Vent, Fits 5/8" Hose, Stainless - 352230-1 - 354-3522301F1
Compensates for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery. Also doubles as a pressure release valve for the gas tank. Investment cast 316 stainless steel construction. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose at a 90° angle.
Seadog 3520301 90° Gas Tank Vent, Fits 5/8" Hose, Brass - 352030-1 - 354-3520301F1
Compensates for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery. Also doubles as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose at a 90° angle.
Seadog 351391 Angled Hose Deck Fill Replacement Cap - 351391-1 - 354-3513911F1
Investment cast 316 stainless angled hose deck fill replacement cap. Cap threads are 1-1/2" to 12 NPSM straight.
Seadog 351331L Locking Diesel Hose Deck Fill W/Keys, 2" Hose - 351331L - 354-351331Lf1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 351331 Diesel Deck Fill For 2" Hose - 351331 - 354-351331F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 2" hose versions are 1-1/2" - 11-1/2 NPSM straight cap threads.
Seadog 351330 Gas Deck Fill A:2" Hose, B:3-1/4", C:3-7/16", #10 Fh, Gas - 351330 - 354-351330F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 2" hose versions are 1-1/2" - 11-1/2 NPSM straight cap threads.
Seadog 3513231 Waste Deck Fill For 1-1/2" Hose - 351323-1 - 354-3513231F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" - 11-1/2 NPSM straight cap threads.
Seadog 351321L1 Locking Diesel Hose Deck Fill W/Keys, 1-1/2" Hose - 351321L-1 - 354-351321L1F1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 351321 Diesel Deck Fill For 1-1/2" Hose - 351321-1 - 354-3513211F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" © 11-1/2 NPSM straight cap threads.
Seadog 351320L Locking Gas Hose Deck Fill W/Keys, 1-1/2" Hose - 351320L-1 - 354-351320L1F1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 3513201 Gas Deck Fill For 1-1/2" Hose - 351320-1 - 354-3513201F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" © 11-1/2 NPSM straight cap threads.
Seadog 351300 Hose Deck Fill Body Without Cap, 1-1/2" Hose Diameter - 351300-1 - 354-3513001F1
316 stainless steel body with black plastic cap. Cap threads are 1-1/4" to 11-1/2 NPSM straight. Use #10 fasteners.
Seadog 340041 Deck Drain 5-5/8" White Abs - 340041 - 354-340041F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400401 Deck Drain 5-5/8" Black Abs - 340040-1 - 354-3400401F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400211 Deck Drain 4-3/16" White Abs - 340021-1 - 354-3400211F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400201 Deck Drain 4-3/16" Black Abs - 340020-1 - 354-3400201F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 337425 Hose Thru Vent, 4" Black - 337425 - 354-337425F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337415 Hose Thru Vent, 4" White - 337415 - 354-337415F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337325 Hose Thru Vent, 3" Black - 337325 - 354-337325F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337315 Hose Thru Vent, 3" White - 337315 - 354-337315F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 3361651 Smooth Finish Quarter-Turn Deck Plate, Black,A:6-1/2" , B:8-1/8", C:6-1/2", D:7-3/8" - 336165-1 - 354-3361651F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361571 Smooth Finish Quarter-Turn Deck Plate, Black,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336157-1 - 354-3361571F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361551 Smooth Finish Quarter-Turn Deck Plate, Black, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336155-1 - 354-3361551F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361521 Smooth Finish Quarter-Turn Deck Plate, White, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336152-1 - 354-3361521F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361501 Smooth Finish Quarter-Turn Deck Plate, White,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336150-1 - 354-3361501F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361401, Smooth Finish Quarter-Turn Deck Plate,White,, A:4-1/2" , B:6-1/8", C:4-1/2", D:5-3/8 - 336140-1 - 354-3361401F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 335680 Adjustable Bronze Deck Plate Key - 6" Max Opening - 335680-1 - 354-3356801F1
Opens to a max of 6" and comes with two sizes of stainless steel pins 3/16" and 5/16" allowing it to fit most plates or caps. Satin finished bronze. Heavy duty constructionGreat addition to every tool boxCorrosion resistant
Seadog 3314101 Louvered Vent, 9" H X 5" W - 331410-1 - 354-3314101F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314051 Oval Louvered Vent, Stainless Steel - 331405-1 - 354-3314051F1
Oval Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.94 sq in.
Seadog 3314001 Louvered Vent, 9-1/8" H X 4-5/8" W - 331400-1 - 354-3314001F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313901 Louvered Vent, 5" H X 4-5/8" W - 331390-1 - 354-3313901F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313801 Louvered Vent, 2-5/8" H X 5" W - 331380-1 - 354-3313801F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 331320 Cowl Vent With Base - Uses 3" Hose - #8 Fastener - 331320-1 - 354-3313201F1
Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3" ventilation hose. Installs with four #8 FH fasteners (not included).
Seadog 329536 Stainless Antenna Extension, 24" - 329536-1 - 354-3295361F1
Machined 304 stainless steel antenna base extension mast. Features standard 1"-14 thread. Male and female fittings. One section.
Seadog 329532 Stainless Antenna Extension, 12" - 329532-1 - 354-3295321F1
Machined 304 stainless steel antenna base extension mast. Features standard 1"-14 thread. Male and female fittings. One section.
Seadog 329100 White Adjustable Antenna Base - 1/4" Fastener - 329100-1 - 354-3291001F1
Injection molded UV stabilized nylon construction with dual swiveling mounts for full adjustability. Designed to feed the antenna wire directly through the base eliminating the need for a separate cable outlet, reducing potential areas for water leakage. The control knob allows for quick and easy adjustment diminishing the potential of mooring, fishing or other lines getting fouled on a handle. Accepts any standard antenna with 1" - #14 threads. Installs with four 1/4 FH fasteners (not included).
Seadog 328112 Adjustable 17" Bow Form Flagpole - 328112-1 - 354-3281121F1
Highly polished, heavy wall stainless steel tubing with injection molded nylon and polypropylene fittings. The flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips allowing mounting flexibility for a variety of flag or pennant sizes. Maximum safe speed 10 MPH.
