Batteries & Charging
Blue Sea 6007 Battery Switch Mini 4-Position W/Knob, Red - 6007-Bss - 661-6007F1
M-Series Selector Battery Switch (Mini) switches battery bank 1 or battery bank 2 or BOTH to a single load using one switch. Features make-before-break design. Rated for 300 amps, 500 intermittent, 1500 cranking.
Blue Sea 6006 Battery Switch Mini On/Off W/Knob, Red - 6006-Bss - 661-6006F1
300 Ampere continuous rating for outboards and small gasoline or diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept 3/8" or M10 ring terminals. Features isolation cover with 3 removable sides. This Mini switch is 2-7/8" x 2-7/8". Ignition protected and UL Listed. Rated for 300 amps continuous, 500 intermittent, 1500 cranking
Blue Sea 6005 Battery Switch, Mini On/Off W/Key - 6005-Bss - 661-6005F1
300 Ampere continuous rating for outboards and small gasoline or diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept 3/8" or M10 ring terminals. Features isolation cover with 3 removable sides. This Mini switch is 2-7/8" x 2-7/8". Ignition protected and UL Listed. Rated for 300 amps continuous, 500 intermittent, 1500 cranking
Blue Sea 6004 Battery Switch, Mini On/Off W/Locking Key - 6004-Bss - 661-6004F1
300 Ampere continuous rating for outboards and small gasoline or diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept 3/8" or M10 ring terminals. Features isolation cover with 3 removable sides. This Mini switch is 2-7/8" x 2-7/8". Ignition protected and UL Listed. Rated for 300 amps continuous, 500 intermittent, 1500 cranking
Blue Sea 4321 Water-Resistant Circuit Breaker Switch Panel, 4 Position W/12V Socket & Dual Usb Charger - 4321-Bss - 661-4321F1
Illuminated 15A circuit breakers provide switching, ON indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retrofitted in an existing applicationPolycarbonate/ABS panel surface is UV-stabilized, flame retardant, and will not corrodeSilicon breaker boots and gasket protects against water ingressLow profile makes it easy to install in tight spacesFast-on circuit breaker connectors make it quick to wireTwo-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connectionsSet of 15 square format circuit labels are included, and are easy to replace.Nominal Voltage: 12V DCAmperage Max. Operating: 45ATerminal Type: 1/4" Male quick connect
Blue Ox® Bx88453 Towed Vehicle Charge Line - Bx88453 - 123-Bx88453F1
Blue Ox® Baseplate and Tow Bar Parts/Accessories
Blue Ox® Bx88443 Manual Battery Disconnect - Bx88443 - 123-Bx88443F1
Blue Ox® Baseplate and Tow Bar Parts/Accessories
Bep Contour Surface Or Recessed Manual Battery Master Switch - 701 - 969-701F1
2 POSITION - ON/OFFPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.The 701 offers a contour lock system, allowing it to be a stand alone unit or locked together with other switches. It also features a control knob which cannot be removed while in the ON or OFF position, however can be removed by switching to an anti-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications. A rear cover insulates the terminals against any short circuits and ensures the switch meets ABYC requirements. Tin plated copper studs & nuts. Rated for 275 amps continuous, 455 intermittent, 1250 amps cranking. Compact, lightweightRemovable keyCountersunk recesses for surface mount applicationStandard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictionsStandard interchange label systemMolded in high temperature, fiber reinforced plastics
Bep 80716003100 Smart Battery Hub, Triple Engine Model - 80-716-0031-00 - 969-80716003100F1
Smart Battery Hub is a complete all in one battery management system for vessels running 2 - 6 outboards. Simplifies battery management with remotely activated switches, automatic dual direction Voltage Sensitive Switching (VSS) and emergency parallel functionality, housed in a robust, easy-to-install, ignition-protected IPX7 enclosure. Twin or Triple engine configurationsRemotely operated switches via analog inputs or CZone®Configurable dual direction voltage sensitive switchesMonitors and transmits all battery voltages, including house bank state of charge over NMEA2000 for integration with multi-function displays2 x additional sensor inputsFull mechanical override of all switches for safety and servicingParallel two units together for 4, 5 or 6 engine installationsFor 12 or 24 volt systems
Bep 80716003000 Smart Battery Hub, Twin Engine Model - 80-716-0030-00 - 969-80716003000F1
Smart Battery Hub is a complete all in one battery management system for vessels running 2 - 6 outboards. Simplifies battery management with remotely activated switches, automatic dual direction Voltage Sensitive Switching (VSS) and emergency parallel functionality, housed in a robust, easy-to-install, ignition-protected IPX7 enclosure. Twin or Triple engine configurationsRemotely operated switches via analog inputs or CZone®Configurable dual direction voltage sensitive switchesMonitors and transmits all battery voltages, including house bank state of charge over NMEA2000 for integration with multi-function displays2 x additional sensor inputsFull mechanical override of all switches for safety and servicingParallel two units together for 4, 5 or 6 engine installationsFor 12 or 24 volt systems
Bep 779Lbbss Pro Installer Battery Switch Link Bar Set - 779-Lb-Bss - 969-779Lbbssf1
Used to connect various BEP products to create systems. High purity copper, tin platedFastest, most economic way of connecting productsSaves space, allows clustering for the most compact installations779LBBSS Includes 1ea 779LB1, 3ea 779LB2
Bep 772Dbc Pro Installer Dual Bank Control Battery Switch (1,1/2, Parallel, Off) - 772-Dbc - 969-772Dbcf1
A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment.
Bep 701Pm Contour Panel Mounted Manual Battery Master Switch - 701-Pm - 969-701Pmf1
2 POSITION - ON/OFFThe 701 offers a contour lock system, allowing it to be a stand alone unit or locked together with other switches. It also features a control knob which cannot be removed while in the ON or OFF position, however can be removed by switching to an anti-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications. A removable rear cover insulates the terminals against any short circuits and ensures the switch meets ABYC requirements. Can be either surface or recess mounted by cutting a 2-1/16" hole. Tin plated copper studs & nuts. Rated for 275 amps continuous, 455 intermittent, 1250 amps cranking. Compact, lightweightRemovable keyCountersunk recesses for surface mount applicationStandard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictionsStandard interchange label systemMolded in high temperature, fiber reinforced plastics
Battery Tray-Series 27, 30 & 31 - 42216 - 114-042216F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust Meets Coast Guard regulations (E10)
Battery Tray-Series 24 - 42215 - 114-042215F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust Meets Coast Guard regulations (E10)
Battery Tray W/Strap, Group 27 - 42234 - 114-042234F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Battery Tray W/Strap, Group 24 - 42233 - 114-042233F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Battery Tray 27M-W/Cross Bar - 2626581 - 23-90915F1
Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.
Battery Tray 24M-W/Cross Bar - 2626216 - 23-90905F1
Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.
Battery Terminal, Universal - 13730 - 50-13730F1
Converts standard battery post terminals to a marine stud connector. Allows for easy removal of connector from battery. Plated wing nuts. 3/8" Positive stud and 5/16" negative stud. Fits all standard battery posts.
Battery Terminal, Positive - 62711 - 50-62711F1
Clamp type wing nut terminal made of lead alloy. Brass plated wing nuts. 3/8" Positive stud. Fits all standard battery posts.
Battery Terminal, Negative - 62701 - 50-62701F1
Clamp type wing nut terminal made of lead alloy. Brass plated wing nuts. 5/16" Negative stud. Fits all standard battery posts.
Battery Terminal Single Fuse Block, 30-300 Amps - 5191-Bss - 661-5191F1
Compact, high-amp fuse, appropriate for DC main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraintsWeatherproof - for small open boats and other harsh environmentsMounts to 3/8" battery post, battery switch, or bus system.Voltage Max. Operating: 58V DCAmperage Max. Operating: 300ATerminal Fuses Available: 30-300 AmpsFuse sold separately
Battery Terminal Protector 7.5Oz Not For Sale In Canada - 5046 - 77-05046F1
Battery Terminal Mount Busbars - 2340-Bss - 661-2340F1
Tin plated copper bus handles voltage up to 32VDC and is rated for 100 Amps. #8-32 Screw terminals w/captive star lock washers ensure a good connection.
Battery Terminal Double Fuse Block, 30-300 Amps - 2151-Bss - 661-2151F1
Compact, high-amp fuse, appropriate for DC main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraintsWeatherproof - for small open boats and other harsh environmentsMounts to 3/8" battery post, battery switch, or bus system.Voltage Max. Operating: 58V DCAmperage Max. Operating: 300ATerminal Fuses Available: 30-300 AmpsFuses sold separately
Battery Terminal Covers - 415115-1 - 354-4151151F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Covers - 415110-1 - 354-4151101F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Covers - 099078-10 - 114-09907810F1
Meets Coast Guard and BIA safety regulations requiring antishort protection for battery terminals. Flexible PVC. Will accept 1/2" OD terminal cable.
Battery Terminal Cover, Red - 415116 - 354-415116F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Red - 415111 - 354-415111F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Black - 415117 - 354-415117F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Black - 415112 - 354-415112F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal - Post Top Style4/0 Gauge - Negative - 50-63581 - 50-63581F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style4 Gauge - Negative - 50-63541 - 50-63541F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style1/0 Gauge - Negative - 50-63561 - 50-63561F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style1-2 Gauge - Negative - Ftzd8143 - 50-63601F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style 4/0 Gauge - Positive - 50-63591 - 50-63591F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style 4 Gauge - Positive - 50-63551 - 50-63551F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style 1/0 Gauge - Positive - 50-63571 - 50-63571F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Post Top Style 1-2 Gauge - Positive - Ftz18144 - 50-63611F1
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded
Battery Terminal - Clamp Style 10 Pack - 13720 - 50-13720F1
Fits positive or negative posts. Made from 100% recycled lead. Clamp holds cable or strap. Removable plate for easy assembly Threaded clamp avoids pull-out.
Battery Switch Replaces P/N 69-715S - 715-S - 969-715Sf1
Battery Switch - 8501Dp - 9-8501Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Battery Strap - 042217-10 - 114-04221710F1
Includes footman loops and stainless steel screws.
Battery Rack Free W/Purchase Of 24 Batt - R900 - 711-Qsr900F1
Battery Power 24-3500 Battery Lithium 3500Wh Rated 25.9V Wei - 2106-00 - 207-210600F1
Battery Lifeline Agm 12V Auto Post - Gpl-8D-A - 819-Llgpl8Daf1
Battery Isolator, 1-Alternator 3-Batteries 160A - 18-6854 - 47-6854F1
Battery isolators allow you to charge multiple batteries from a single source.* Will not work with Delco "CS" style alternators.
Battery Isolator, 1-Alternator 2-Batteries 75A - 18-6855 - 47-6855F1
Battery isolators allow you to charge multiple batteries from a single source.* Will not work with Delco "CS" style alternators.
Battery Isolator, 1-Alternator 2-Batteries 165A - 18-6852 - 47-6852F1
Battery isolators allow you to charge multiple batteries from a single source.* Will not work with Delco "CS" style alternators.
Battery Isolator, 1-Alternator 2-Batteries 130A - 18-6851 - 47-6851F1
Battery isolators allow you to charge multiple batteries from a single source.* Will not work with Delco "CS" style alternators.
Battery Gel Tech Dryfit 12 Volt - 8Gu1 - 819-8Gu1F1
Gel-Tech batteries are designed to provide superior performance for marine, commercial, and recreational applications. The gelled electrolyte technology creates a low self-discharge rate, which eliminates the side effects of prolonged storage and extends battery life. Spill-proof, vibration resistant, and built to withstand varying temperatures, these batteries can perform both starting and deep cycle tasks. Maintenance-free. Made in the U.S.A. For pleasure craft: 12-month replacement period & 60-month pro rated credit period. 12 Volt.
Battery Gel Tech Dryfit 12 Volt - 8G8D - 819-8G8Df1
Gel-Tech batteries are designed to provide superior performance for marine, commercial, and recreational applications. The gelled electrolyte technology creates a low self-discharge rate, which eliminates the side effects of prolonged storage and extends battery life. Spill-proof, vibration resistant, and built to withstand varying temperatures, these batteries can perform both starting and deep cycle tasks. Maintenance-free. Made in the U.S.A. For pleasure craft: 12-month replacement period & 60-month pro rated credit period. 12 Volt.
Battery Gel Tech Dryfit 12 Volt - 8G4D - 819-8G4Df1
Gel-Tech batteries are designed to provide superior performance for marine, commercial, and recreational applications. The gelled electrolyte technology creates a low self-discharge rate, which eliminates the side effects of prolonged storage and extends battery life. Spill-proof, vibration resistant, and built to withstand varying temperatures, these batteries can perform both starting and deep cycle tasks. Maintenance-free. Made in the U.S.A. For pleasure craft: 12-month replacement period & 60-month pro rated credit period. 12 Volt.
Battery Gel Tech Dryfit 12 Volt - 8G31Dt - 819-8G31Dtmf1
Gel-Tech batteries are designed to provide superior performance for marine, commercial, and recreational applications. The gelled electrolyte technology creates a low self-discharge rate, which eliminates the side effects of prolonged storage and extends battery life. Spill-proof, vibration resistant, and built to withstand varying temperatures, these batteries can perform both starting and deep cycle tasks. Maintenance-free. Made in the U.S.A. For pleasure craft: 12-month replacement period & 60-month pro rated credit period. 12 Volt.
Battery Gel Tech Dryfit 12 Volt - 8G27M - 819-8G27Mf1
Gel-Tech batteries are designed to provide superior performance for marine, commercial, and recreational applications. The gelled electrolyte technology creates a low self-discharge rate, which eliminates the side effects of prolonged storage and extends battery life. Spill-proof, vibration resistant, and built to withstand varying temperatures, these batteries can perform both starting and deep cycle tasks. Maintenance-free. Made in the U.S.A. For pleasure craft: 12-month replacement period & 60-month pro rated credit period. 12 Volt.
Battery Gel Tech Dryfit 12 Volt - 8G24M - 819-8G24F1
Gel-Tech batteries are designed to provide superior performance for marine, commercial, and recreational applications. The gelled electrolyte technology creates a low self-discharge rate, which eliminates the side effects of prolonged storage and extends battery life. Spill-proof, vibration resistant, and built to withstand varying temperatures, these batteries can perform both starting and deep cycle tasks. Maintenance-free. Made in the U.S.A. For pleasure craft: 12-month replacement period & 60-month pro rated credit period. 12 Volt.
Battery Doctor Yellow Wire Nut Connectors, 18-10 Awg, 5/Pk. - 80886 - 240-80886F1
Rated to 300 Volt Max Make quick secure connections for positive continuityReusable for easy circuit changes and additions
Battery Doctor Yellow Vinyl Insulated Ring Terminal, 10-12 Awg, 25/Pk. - 80859 - 240-80859F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 600V
Battery Doctor Yellow Vinyl Insulated Ring Terminal, 10-12 Awg, 25/Pk. - 80359 - 240-80359F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 600V
Battery Doctor Yellow Vinyl Insulated Quick Disconnects, 12-10 Awg, Female, 25/Pk. - 80827 - 240-80827F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 300V
Battery Doctor Yellow Nylon Insulated Ring Terminal, 12-10 Awg, 5/Pk. - 80865 - 240-80865F1
General Purpose Nylon Insulation Rated to 167°F (75°C) Maximum Voltage: 600V
Battery Doctor Yellow Nylon Fully Insulated Quick Disconnects, 12-10 Awg, Male, 5/Pk. - 80878 - 240-80878F1
Fully Insulated Connectors for Optimum ProtectionHigh Temperature Nylon Insulation Rated to 221°F (105°C)Maximum Voltage: 300V
Battery Doctor Yellow Nylon Fully Insulated Quick Disconnects, 12-10 Awg, Female, 5/Pk. - 80830 - 240-80830F1
Fully Insulated Connectors for Optimum Protection High Temperature Nylon Insulation Rated to 221°F (105°C)Maximum Voltage: 300V
Battery Doctor Weatherproof Ato/Atc Fuse Holder - 31850 - 240-31850F1
Two 4" 12-gauge orange wire leads Snap-on cover included with mounting holeROHS approvedFuse Not Included
Battery Doctor Red Wire Nut Connectors, 14-10 Awg, 5/Pk. - 80888 - 240-80888F1
Rated to 300 Volt Max Make quick secure connections for positive continuityReusable for easy circuit changes and additions
Battery Doctor Red Vinyl Insulated Spade Terminal, 16-14 Awg, 25/Pk. - 80838 - 240-80838F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 600V
Battery Doctor Orange Wire Nut Connectors, 18-14 Awg, 5/Pk. - 80884 - 240-80884F1
Rated to 300 Volt Max Make quick secure connections for positive continuityReusable for easy circuit changes and additions
Battery Doctor Minblade™ Fuses, 5A, 5/Pk - 24105 - 240-24105F1
Ideal for automotive, marine, agricultural, RV and more. Color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J2077 ATMUL 275A Standard ATM/Mini™
Battery Doctor Minblade™ Fuses, 30A, 5/Pk - 24130 - 240-24130F1
Ideal for automotive, marine, agricultural, RV and more. Color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J2077 ATMUL 275A Standard ATM/Mini™
Battery Doctor Minblade™ Fuses, 25A, 5/Pk - 24125 - 240-24125F1
Ideal for automotive, marine, agricultural, RV and more. Color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J2077 ATMUL 275A Standard ATM/Mini™
Battery Doctor Minblade™ Fuses, 20A, 5/Pk - 24120 - 240-24120F1
Ideal for automotive, marine, agricultural, RV and more. Color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J2077 ATMUL 275A Standard ATM/Mini™
Battery Doctor Minblade™ Fuses, 15A, 5/Pk - 24115 - 240-24115F1
Ideal for automotive, marine, agricultural, RV and more. Color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J2077 ATMUL 275A Standard ATM/Mini™
Battery Doctor Minblade™ Fuses, 10A, 5/Pk - 24110 - 240-24110F1
Ideal for automotive, marine, agricultural, RV and more. Color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J2077 ATMUL 275A Standard ATM/Mini™
Battery Doctor Midblade™ Ato/Atc Fuses, 7.5A, 5/Pk - 24357 - 240-24357F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 5A, 5/Pk - 24355 - 240-24355F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 40A, 5/Pk - 24390 - 240-24390F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 3A, 5/Pk - 24353 - 240-24353F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 30A, 5/Pk - 24380 - 240-24380F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 25A, 5/Pk - 24375 - 240-24375F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 20A, 5/Pk - 24370 - 240-24370F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 15A, 5/Pk - 24365 - 240-24365F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Midblade™ Ato/Atc Fuses, 10A, 5/Pk - 24360 - 240-24360F1
Ideal for automotive, marine, agricultural, RV and more. Each fuse is color coded to indicate the amperage. All fuses feature an enclosed element to prevent shocks, sparks and corrosion. Designed to OEM specifications.Comply with: SAE J1284 ATO/ATCUL 275A Standard ATO/ATC
Battery Doctor Maxblade™ Fuse, 60A, 2/Pk - 24560 - 240-24560F1
A Maxi automotive fuse for use in automotive, battery and general DC applications.
Battery Doctor Maxblade™ Fuse, 30A, 2/Pk - 24530 - 240-24530F1
A Maxi automotive fuse for use in automotive, battery and general DC applications.
Battery Doctor Male Blue Nylon Bullet Connector, 16-14 Awg, 5/Pk. - 80873 - 240-80873F1
General Purpose Nylon Insulation Rated to 167°F (75°C) Maximum Voltage: 600V
Battery Doctor Led Fuse Holder, 30A Mini - 24413 - 240-24413F1
30 amp In-Line blade fuse holder with 12-gauge red wires 6" on each side; total length of 12"Built-in LED shows blown fuseFuse included
Battery Doctor In-Line Ato/Atc Heavy Duty Fuse Holder, Carded - 31813-7 - 240-318137F1
For AGC and SFE Glass Fuses Accepts 12-18 Gauge WireFuse Not IncludedRoHS CompliantYellow Neoprene Material for Easy Visibility
Battery Doctor In-Line Ato/Atc Heavy Duty Fuse Holder, Bulk Pack - 31813 - 240-31813F1
For AGC and SFE Glass Fuses Accepts 12-18 Gauge WireFuse Not IncludedRoHS CompliantYellow Neoprene Material for Easy Visibility
Battery Doctor In-Line Atm/Mini-Fuse Holder - 31827 - 240-31827F1
ATM fuse holder with cover. Two 6" leads. Fuse sold separately.
Battery Doctor High Temperature Vinyl Insulated Pigtail Connector, 16-14 Awg, 5/Pk. - 80820 - 240-80820F1
High Temperature Nylon Insulation Rated to 221°F (105°C) Maximum Voltage: 600V
Battery Doctor High Temperature Vinyl Insulated Pigtail Connector, 12-10 Awg, 5/Pk. - 80822 - 240-80822F1
High Temperature Nylon Insulation Rated to 221°F (105°C) Maximum Voltage: 600V
Battery Doctor High Temperature Vinyl Insulated Pigtail Connector, 12-10 Awg, 25/Pk. - 80823 - 240-80823F1
High Temperature Nylon Insulation Rated to 221°F (105°C) Maximum Voltage: 600V
Battery Doctor High Temperature Red Vinyl Insulated Butt Connector, 22-18 Awg, 25/Pk. - 80801 - 240-80801F1
High Temperature Nylon Insulation Rated to 221°F (105°C) Maximum Voltage: 300V
Battery Doctor High Temperature Blue Vinyl Insulated Butt Connector, 16-14 Awg, 25/Pk. - 80804 - 240-80804F1
High Temperature Nylon Insulation Rated to 221°F (105°C) Maximum Voltage: 300V
Battery Doctor Heavy Duty Maxi Fuse Holder - 31860-7 - 240-318607F1
With Cover 6" loop lengthFuse sold separately
Battery Doctor Gray Wire Nut Connectors, 22-18 Awg, 5/Pk. - 80880 - 240-80880F1
Rated to 300 Volt Max Make quick secure connections for positive continuityReusable for easy circuit changes and additions
Battery Doctor General Purpose Yellow Vinyl Insulated Butt Connector, 12-10 Awg, 25/Pk. - 80816 - 240-80816F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 300V
Battery Doctor General Purpose Red Vinyl Insulated Butt Connector, 22-18 Awg, 25/Pk. - 80810 - 240-80810F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 300V
Battery Doctor General Purpose Blue Vinyl Insulated Butt Connector, 16-14 Awg, 25/Pk. - 80813 - 240-80813F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 300V
Battery Doctor Fuse Taps - Ato/Atc Blade Fuse - 30001 - 240-30001F1
Fuse taps for occupied slots in fuse block. Taps clip onto existing fuses to provide an additional connection point for slip-on terminals. A tap installed at "cold" end of fuse slot is protected by existing fuse. A tap installed at "hot" end of fuse slot requires installation of additional in-line fuse for new circuit.Kit includes: 3 taps, 6 slip-on terminals. ^Kit Includes:3 taps, 6 slip-on terminals.
Battery Doctor Dual Usb Port W/Indicator Light - 20601 - 240-20601F1
Dual USB with weatherproof cover Total: 3.1A (1A + 2.1A)Indicator Light
Battery Doctor Dual Usb Port W/5-30V Dc Voltage Meter - 20602 - 240-20602F1
Dual USB with weatherproof cover Total: 4.2A (2.1A + 2.1A)Range 5V-30V DC
Battery Doctor Digital Volt Meter - 20600 - 240-20600F1
Range 6V-30V DC Illuminated Red Read-out
Battery Doctor Complete Trailer Connector, 3-Way Flat, 12" - 80900 - 240-80900F1
Male and Female ends Color coded 18 gauge wires
Battery Doctor Blue Wire Nut Connectors, 22-14 Awg, 5/Pk. - 80882 - 240-80882F1
Rated to 300 Volt Max Make quick secure connections for positive continuityReusable for easy circuit changes and additions
Battery Doctor Blue Vinyl Insulated Ring Terminal, 16-14 Awg, 25/Pk. - 80851 - 240-80851F1
General Purpose Vinyl Insulation Rated to 167°F (75°C)Maximum Voltage: 600V
Battery Doctor Blue Vinyl Insulated Ring Terminal, 16-14 Awg, 25/Pk. - 80847 - 240-80847F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 600V
Battery Doctor Blue Vinyl Insulated Quick Disconnects, 16-14 Awg, Female, 25/Pk. - 80826 - 240-80826F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 300V
Battery Doctor Blue Vinyl Insulated Quick Disconnects, 16-14 Awg, Female, 25/Pk. - 80824 - 240-80824F1
General Purpose Vinyl Insulation Rated to 167°F (75°C) Maximum Voltage: 300V
Battery Doctor Blue Self Tapping Idc Splice Connector, 18-14 Awg, 5/Pk. - 80831 - 240-80831F1
Quick, reliable, and convenient splices No stripping, twisting, soldering, or special tools requiredUse with solid copper single-conductor wire
Battery Doctor Blue Nylon Insulated Quick Disconnects, 16-14 Awg, Male, 5/Pk. - 80876 - 240-80876F1
Fully Insulated Connectors for Optimum Protection High Temperature Nylon Insulation Rated to 221°F (105°C)Maximum Voltage: 300V
Battery Doctor Blue Nylon Insulated Quick Disconnects, 16-14 Awg, Female, 5/Pk. - 80877 - 240-80877F1
Fully Insulated Connectors for Optimum Protection High Temperature Nylon Insulation Rated to 221°F (105°C)Maximum Voltage: 300V
Battery Doctor Battery Doctor In-Line Ato/Atc Fuse Holder W/Cover, Bulk - 31820-7 - 240-318207F1
For Blade Fuses with Water Resistant Cap. Loop Length is 5-1/2" with 12-Gauge Wire30 Amp Fuse Included
Battery Doctor Battery Doctor In-Line Ato/Atc Fuse Holder W/Cover - 31820 - 240-31820F1
For Blade Fuses with Water Resistant Cap. Loop Length is 5-1/2" with 12-Gauge Wire30 Amp Fuse Included
Battery Doctor Battery Doctor In-Line Ato/Atc Fuse Holder - 31811 - 240-31811F1
12" Loop Length with 14-Gauge Wire Fuse Not Included
Battery Doctor Battery Brush - Plastic - 21003 - 240-21003F1
Easily removes rust and corrosion from battery posts and terminals. Metal bristles. Fits standard posts. Remove cap to reveal brush. Plastic case.
Battery Doctor Auto Reset Circuit Breaker W/Right Angle Bracket, 50A - 31118 - 240-31118F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/Right Angle Bracket, 40A - 31117 - 240-31117F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/Right Angle Bracket, 30A - 31115 - 240-31115F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/Right Angle Bracket, 20A - 31113 - 240-31113F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/Right Angle Bracket, 15A - 31112 - 240-31112F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/In-Line Bracket, 50A - 31128 - 240-31128F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/In-Line Bracket, 30A - 31125 - 240-31125F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/In-Line Bracket, 20A - 31123 - 240-31123F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/In-Line Bracket, 15A - 31122 - 240-31122F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker W/In-Line Bracket, 10A - 31121 - 240-31121F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation. Complies with SAE Standard J553Auto Reset
Battery Doctor Auto Reset Circuit Breaker - Blade Style, 30 Amp - 31184 - 240-31184F1
Designed to protect an electrical circuit from damage caused by overload or short circuit. Can be reset (either manually or automatically) to resume normal operation.
Battery Doctor Agc Glass Fuse, 7.5A, 5/Pk - 24607 - 240-24607F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 5A, 5/Pk - 24605 - 240-24605F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 30A, 5/Pk - 24630 - 240-24630F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 25A, 5/Pk - 24625 - 240-24625F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 2.5A, 5/Pk - 24602 - 240-24602F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 15A, 5/Pk - 24615 - 240-24615F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 10A, 5/Pk - 24610 - 240-24610F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor 42 Piece Ato/Atc Fuse Kit - 30914 - 240-30914F1
Includes: 7 each - 5 Amp, 10 Amp, 15 Amp, 20 Amp, 25 Amp, and 30 Amp Fuses1 each - Puller/Tester
Battery Doctor 42 Piece Atm/Mini Fuse Kit - 30915 - 240-30915F1
Includes: 7 each - 5 Amp, 10 Amp, 15 Amp, 20 Amp, 25 Amp, and 30 Amp Fuses1 each - Puller/Tester
Battery Doctor 4-Way Trailer End, 48" Male - 80905 - 240-80905F1
Wishbone Harness
Battery Doctor 4-Way Trailer End, 36" Male - 80904 - 240-80904F1
Wishbone Harness
Battery Doctor 4-Way Trailer End, 24" Male - 80903 - 240-80903F1
Wishbone Harness
Battery Doctor 4-Way Trailer End, 12" Male - 80902 - 240-80902F1
Wishbone Harness
Battery Doctor 23144 Solar Charger, 9 Watts - 23144 - 240-23144F1
Battery Doctor® Solar Solutions offer a variety of choices in Amorphous Solar Panels. Our Amorphous panels and kits work in all daylight conditions helping you to harness the Suns Energy! Waterproof, shock and rust resistant, Battery Doctor® has your Go Green Technology covered! Durable Plastic FrameMale output adapter (cigarette lighter adapter)Alligator clipsMounting Hardware
Battery Doctor 23143 Trickle Charger, 5 Watts - 23143 - 240-23143F1
Battery Doctor® Solar Solutions offer a variety of choices in Amorphous Solar Panels. Our Amorphous panels and kits work in all daylight conditions helping you to harness the Suns Energy! Waterproof, shock and rust resistant, Battery Doctor® has your Go Green Technology covered! Durable Plastic FrameMale output adapter (cigarette lighter adapter)Alligator clipsMounting Hardware
Battery Distribution Cluster Single Engine Square Replaces P/N 69-716Sq140Advsr - 716-Sq-140A-Dvsr - 969-716Sq140Advsrf1
Battery Disc W/Break 70A W/ Breaker 70A - 830404-1 - 354-8304041F1
Battery Disc W/Break 30A W/ Breaker 30A - 830400-1 - 354-8304001F1
Battery Clips, Pr. - 14258-6 - 23-142586F1
All copper construction with red and black handle grips. 3" x 1-1/8". For use with wire up to 10-gauge.
Battery Clip - 13651 - 50-13651F1
For use with all battery operated electrical devices. Copper plated. 1" jaw opening. 3" long.
Battery Charger Output Extension Cable - 1820089 - 27-1820089F1
WAGO Wall-Nut Quick Connectors (UL listed)Fused Positive & Negative Leads
Battery Box Strap - 54" - 415094-1 - 354-4150941F1
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.
Battery Box Strap - 38" - 415092-1 - 354-4150921F1
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.
Battery Box 8D Double High - 912339 - 100-912339F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
Battery Box 4D - 902138 - 100-902138F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
Battery Agm Gr8D1800Ca/1450Cca Marine Parts - Odpagm8Dt - 819-Odpagm8Dtf1
Battery Agm 1450Ca/1300Cca 214Aa 12V - Odsagm470Ft - 819-Odsagm470Ftf1
Batt Charger1Kwh Us230 Avator - 8M6012092 - 710-8M6012092F1
Batt Charger1Kwh Us110 Avator - 8M6012091 - 710-8M6012091F1
Balmar Sg235 Sg235 Battery Monitor Kit, Sg2-0300 - Sg235 - 684-Sg235F1
Includes NMEA 2000 SmartShunt, NMEA 2000 M12 (DeviceNet) Adapter Cable and Bluetooth Gateway (No Color Display)
Balmar Sg210 Battery Monitor Kit - Sg210 - 684-Sg210F1
State of Charge (SoC%) 97% accurate display of your battery's State of Charge after learning batteries State of Health (SoH%) Proprietary self-calibrating algorithm determines how your battery has aged from its original capacityCharge/Discharge Amps Displays the real-time current flowing in or out of your house batteryTime Remaining until empty when discharging, or time remaining until full when chargingIncludes Color Display, SmartShunt, Smartlink Com Cable, Bluetooth® Gateway
Balmar Sg205 Battery Monitor Kit, 12-48V - Sg205 - 684-Sg205F1
Battery monitor combines the best features of the 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Facilitates multiple Displays or multiple SmartShunts to the network-allowing the boater to monitor multiple energy banks simultaneously from multiple locations. The SG205 is for users who want to monitor their batteries exclusively from their smart phone including the SmartShunt and Bluetooth Gateway®. The SG205 has the same features as the SG200 without the 2" color display.
Balmar Sg20130 Sg200 Battery Monitor Optional Second Deep Cycle Bank/Upgrading To N2K Capabilities - Sg2-0130 - 684-Sg20130F1
Optional SmartShunt for Monitoring a Second Deep Cycle Bank or Upgrading an Existing SG200 to N2K Capabilities; Comes with the M12 (DeviceNet) 12" N2K Cable Adapter (SG2-0405)
Balmar Sg200 Battery Monitor - Sg200 - 684-Sg200F1
The SG200 is quite simply the most accurate battery monitor available today. Balmar has combined the best features of its 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Device architecture which facilitates multiple Displays or multiple SmartShunts to be added to the network-allowing the boater to monitor multiple energy storage banks simultaneously from multiple locations. Learns & Displays All Critical Battery Parameters: State of Charge (SoC%), State of Health (SoH%), Charge/Discharge Current Flow, Time Remaining, History, Faults & Alerts Support for All Common Battery Chemistries & Voltages: Lead Acid, Lithium (LiFePO4), Standard , 12V-48V Battery Banks, Typically 97% Accurate for SoC% within 2 Cycles, Auto-Calibrating, Does not Lose Accuracy with Age Large, Bright Color Display: Sunlight Readable, Configurable & Dimmable, 60 Degree Viewing Angle, Fits in Standard 2 1/16" Gauge Socket Expandable Architecture: Multiple Displays (Optional), Multiple Battery Banks (Optional), Standard Support for 2 Start Batteries (Voltage Only), Simple, easy-to-install Point-to-Point Network Optional Smartphone/Bluetooth® Gateway: Coming Soon, Free iOS and Android Apps (Requires Bluetooth® Gateway PN SG2-0300), View All Parameters on your Phone, Download Product Updates
Balmar Mctsb30 Battery Temp Sensor 30' - Mc-Ts-B30 - 684-Mctsb30F1
Battery Temp Sensor 30' for Max Charge & ARS-5 regulators.
Balmar Mc618Vl01 Max Charge Mc618 Voltage Regulator W/ Temp Sensor, 12V - Mc-618-Vl-01 - 684-Mc618Vl01F1
Upgraded from the MC-614 Voltage Regulator. The MC-618 communicates with the SG200 Battery Monitor. The MC-618 Battery Monitor is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth® Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth® Smartphone App.MC618VL01: Includes Temp Sensors and Internal Smart Ready 12V Regulator for Valeo Alternators.
Balmar Mc618Hc Max Charge Mc618 Voltage Regulator W/ Harness, 12V - Mc-618-Hc - 684-Mc618Hcf1
Upgraded from the MC-614 Voltage Regulator. The MC-618 communicates with the SG200 Battery Monitor. The MC-618 Battery Monitor is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth® Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth® Smartphone App.
Balmar Mc618 Max Charge Mc618 Voltage Regulator, 12V - Mc-618 - 684-Mc618F1
Upgraded from the MC-614 Voltage Regulator. The MC-618 communicates with the SG200 Battery Monitor. The MC-618 Battery Monitor is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth® Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth® Smartphone App.
Balmar Brs-2T Single Stage Voltage Regulator - Brs-2T-12 - 684-Brs2T12F1
For vessels with nominal battery loads and/or applications where charging times are too short to benefit from the intelligence of multi-stage regulators, a single-stage regulator may be satisfactory. Adjustable target voltage to address battery types. Adjustable from 13.5V - 14.5V.
Attwood Standard Non-Vented Battery Box For Group 24/24M, Black - 2618426 - 23-90691F1
Non-vented. All battery boxes meet ABYC standard E-10 and U.S.C.G. Specification Number 183.420 as an OEM-installed battery hold-down system. Polypropylene construction for total acid resistance. Hold-down straps resist 350 pounds of force, nearly four times the U.S.C.G. requirement. Battery boxes are drop tested in temperatures ranging from -20°F to +120°F. Mounting hardware is included.
Attwood Heavy Duty Battery Tray For Group 29/31 - 2627677 - 23-90945F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 27 - 2628042 - 23-90955F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 24/24 - 2628408 - 23-90965F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Battery Switch 12 To 50V Dc On/Off - 14233-7 - 23-142337F1
Compact, heavy-duty battery switch with removable control knob to deter theft. 200 Amps Continuous / 300 Amps Intermittent / on-off-separateErgonomic gripsRemovable walls for easy
Attwood Battery Strap Kit 54" Fits 9084 - 9013A3 - 23-9013A3F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Strap Kit 38" Fits 90651 And 90671 - 2598031 - 23-90133F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Selector Switch 4 Way - 14230-3 - 23-142303F1
Single-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two batteries in parallel, or both off. Rated for 300-amps continuous at 6 VDC, 150-amps continuous at 12 VDC. For 6-Volt to 32-Volt D.C. systems. Includes alternator field circuit disconnect to allows switching while the engine is running. Selector has positive click positions. Bakelite housing with brass terminals and brass nuts. Install with #10 screws. 1, 2, Both, Off.
Attwood All Plastic Heavy Duty Battery Tray - 2629138 - 23-90985F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood All Plastic Heavy Duty Battery Tray - 2628773 - 23-90975F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood 90841 Large Battery Box, Black, Vented - Fits Group 29/31 - 2623904 - 23-90841F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 90821 Standard Battery Box, Black, Vented - Fits Group 16 - 2623174 - 23-90821F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.For smaller batteries like Series 16 and those used in Jet skis and lawn equipment.
Attwood 90707 Powerguard Pro Battery Box, Group 24/27 - 9070-7-Ir - 23-90707F1
Water Resistant Ventilation: Top facing ventilation minimizes water in-take through engineered spill channels, directing rain/ splash away from batteries Polypropylene Composite: Polypropylene composite provides vital durability needed to support heavy lead battery cells, while resisting any run-off and UV discolorationFolding Terminal Entry Panels: Easily run terminal connected wires through folding terminal access panels, without the need to remove mounting strapSnap-Lock Lid Design: Locking lid provides peace of mind that lid will remain secure even under the most extreme conditionsFree-Play Reduction Blocks: Free-Play Reduction Blocks help ensure that 24 series battery cells are kept secure within the box, reducing damage to box and battery alikeReinforced Mounting Hardware: Mounting hardware consists of durable steel mounting feet and reinforced buckled strap to ensure box doesn't shift under heavy wave conditionsBi-Directional Design: Terminal Access Panels are positioned on either side of the box, allowing for maximum battery accessErgonomically Designed Handles: Ergonomic handles allow for easy transportation on and off vessels, trailers, and more
Attwood 90671 Power Guard Battery Box, Black, Fits Group 27M - 2617695 - 23-90671F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 90651 Standard Vented Battery Box For Group 24/24M, Black - 2616965 - 23-90651F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 142646 12V Adapter W/Dual Usb Ports & Battery Charge Display - 14264-6 - 23-142646F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 142626 12V, Dual Usb Adapter/Charger - 14262-6 - 23-142626F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 141977 All-Craft Battery Operated Led Portable Nav Light Kit W/Threaded Pole, Real Tree® Max-4 Camo - 14197-7 - 23-141977F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp, Screw-Down & Adhesive Pad mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141967 All-Craft Battery Operated Led Portable Nav Light Kit W/Threaded Pole, Marine Gray - 14196-7 - 23-141967F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp, Screw-Down & Adhesive Pad mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 119014 Battery Charger - 11901-4 - 23-119014F1
Dual rated 12V and 6V battery charger can be used for all of your marine, automotive, RV, and sport applications. The charger is compact and a perfect for your bench, garage, or shop use. LED indicators let you know that your battery is fully charged. Overcharge, short circuit, and reverse polarity protection provide years of worry-free use.
Ars-5 Advanced Multi Stage Regulator, 12V W/O Harness - Ars-5 - 684-Ars5F1
The ARS-5 features the same capabilties as the MC-614 regulator, but for single alternator applications only. Easy to select and program for flooded, deep cycle flooded, gel, AGM and Optima spiral wound batteries. Ten belt load management settings control horsepower load on drive belts when used with optional temp sensors.
Ars-5 Advanced Multi Stage Regulator, 12V W/Harness - Ars-5-H - 684-Ars5Hf1
The ARS-5 features the same capabilties as the MC-614 regulator, but for single alternator applications only. Easy to select and program for flooded, deep cycle flooded, gel, AGM and Optima spiral wound batteries. Ten belt load management settings control horsepower load on drive belts when used with optional temp sensors.
Arco Xxx Mercury Voltage Regulator - Vr600 - 57-Vr600F1
NEW OEM Premium Replacement Voltage Regulator for Mercury Outboard Engines. Fits: 1995-2005 (25-40HP - 2 Cyl.) 1987-2007 (45-90HP - 3 Cyl.) 1989-2006 (90-125HP- 4 Cyl.) 1992-2000 (150-225HP - 6 Cyl.) Replaces: MERCURY MARINE 815279A2,CDI ELECTRONICS 194-5279,SIERRA 18-5741,EMP 300-26072
Arco Ts001 Mercury Tilt Trim Sender - Ts001 - 57-Ts001F1
NEW OEM Premium Replacement Tilt Trim Sender.Fits: MC-I, R, MR, Alpha, Alpha Gen II, Bravo drives.Replaces: MERCURY 805320A03, 805320A1, 17693A2, 96863A15, 63115A12, 88678A4, 88678A5,SIERRA 18-7633
Arco Tp001 Mercruiser/Volvo/Omc Throttle Position Sensor - Tp001 - 57-Tp001F1
NEW OEM Premium Replacement Throttle Position Sensor for Mercruiser, OMC, and Volvo Penta Inboard Engines.Fits: GM 5.7L, 6.2L MPI (1997-Up)Replaces: MERCRUISER 803148, OMC STERN DRIVE 3855296, VOLVO PENTA 3855296, SIERRA 18-7757, CDI ELECTRONICS E13-0008
Arco Sw941 Yamaha Solenoid - Sw941 - 57-Sw941F1
Replaces: Yamaha 6E5-81941-00, 6E5-81941-10, 6E5-81941-11, 61A-81941-00, Sierra 18-5853
Arco Sw450 Mercruiser, Cobra, Volvo Penta Solenoid - Sw450 - 57-Sw450F1
Fits: ARCO 30460, 30470 4 terminals12 Volt
Arco High Performance Starter - 30459 - 57-30459F1
Fits: Mercruiser, Crusader, Marine Power, and othersLight weight and compact permanent magnet gear reduction Light weight and compact permanent magnet gear reduction
Arco Dv394 Replacement Drive Gear - Dv394 - 57-Dv394F1
Fits: Arco Starter 5394, 13-tooth drive gear.Replaces: Force 811902, Mercury 802665T, 811902, SIERRA 18-5677
Arco Cs001 Mercruiser/Omc Contact Set - Cs001 - 57-Cs001F1
NEW OEM Premium Replacement Contact Set for Mercruiser Inboard Engines.Fits: GM (4 & 6 Cyl) Engines with Conventional Delco Ignition.Replaces: MERCRUISER 34235, 34235T, 35637, OMC STERN DRIVE 380538, CHRIS-CRAFT 16.69-00049, SIERRA 18-5311, CDI ELECTRONICS E66-0017
Arco 98180 Westerbeke Oem Inboard Starter - 98180 - 57-98180F1
NEW Original Equipment Quality Replacement Inboard Starter Mitsubishi gear reduction starter Fits: Westerbeke 9 tooth drive gear,12 volt, CW Rotation. Replaces: Sierra 18-6937, Yanmar 128170-77010D, Yanmar 128170-77010-D
Arco 7326 Mercury Starter, V6 Sport Jet - 7326 - 57-7326F1
Fits: Mercury Select 1996-up V6 Sport Jet, 8-tooth drive gear.Replaces: Mercury 50-832997, 50-832997-1, 50-832997-2, 50-832997003, Sierra 18-6282
Arco 70216 2.3 L Ford Engine Starter - 70216 - 57-70216F1
Three-bolt mount Kit includes wiring harness to replace conventional starter
Arco 6800 Mercury Tilt Trim Motor - 6800 - 57-6800F1
Fits: Yamaha 225hp-250hp, 1993-2003Replaces: Mercury 8M0055006, 893518T01, 830150T10, 830150T6, 830150T4
Arco 6297 Yamaha Tilt Trim Motor - 6297 - 57-6297F1
Fits: Yamaha 225hp-250hp- 1993-2003Replaces: Yamaha 61A-43880-02-00, 61A-43880-01-00, 61A-43880-00-00Sierra Tilt Trim Motor 18-6782
Arco 6296 Yamaha Tilt Trim Motor - 6296 - 57-6296F1
Fits: Yamaha 25hp-40hp, 2000-2022Replaces: 67C-43880-10-00, 67C-43880-01-00, 67C-43880-00-00, 65W-43880-10-00
Arco 6295 Yamaha Tilt Trim Motor - 6295 - 57-6295F1
Fits: Yamaha 300 -350hp 2007-2019 4-StrokeReplaces 6AW-43880-02-00, 6AW-43880-01-00, 6AW-43880-00-00
Arco 6294 Yamaha Tilt Trim Motor - 6294 - 57-6294F1
Fits: Yamaha 90-130hp (fit for 4T F75 F80 F90 F100 F115 FL115 F125 F130) 2014 - 2021 4-StrokeReplaces: 6EK-43880-12-00, 6EK-43880-11-00, 6EK-43880-00-00, 6EK-43880-13-00
Arco 6293 Yamaha Tilt Trim Motor - 6293 - 57-6293F1
Fits: Yamaha 150-250hp, 2011-2021 4-StrokeReplacesYamaha 43880 Series: 63P-43880-11-00, 63P-43880-21-00,63P-43880-22-00, 63P-43880-10-00,6KW-43880-00-00,6KW-43880-01-00
Arco 6286 Mercruiser Replacement S.S. Bracket Assembly - 6286 - 57-6286F1
NEW OEM Premium Replacement Stainless Steel Bracket Assembly. Fits: Late model Mercruiser w/Oildyne pump, Ring Terminal Ends. Replaces: MERCURY 826548A1, 88893A4, 58397A3, 58397A2, 48419A1 SERRA 18-6750.
Arco 6285 Mercruiser Tilt/Trim Motor & Pump Assembly - 6285 - 57-6285F1
NEW OEM Premium Replacement Tilt Trim Motor (Complete Assembly). Fits: Late model Mercruiser w/Oildyne pump, Ring Terminal Ends. Replaces: MERCURY 865380A25, 865380A15, 865380A05, 865380A02 SERRA 18-6747.
Arco 6267 Yamaha Tilt & Trim Motor - 6267 - 57-6267F1
Fits: Yamaha Early 70, 90,115,150-200 HP, 3-wire connection, 3-bolt mount, Ring Terminal Ends, 4-mm thick shaft blade with 68.3-mm mounting collar. Includes O-ring.Replaces: Yamaha 6E5-43880-01, 6E5-43880-02, 6H1-43880-00, 688-43880-10, 688-43880-11, Sierra 18-6259, 18-6821
Arco 6258 Yamaha Tilt & Trim Motor - 6258 - 57-6258F1
2-wire connection 4-bolt mount
Arco 6257 Yamaha Tilt & Trim Motor - 6257 - 57-6257F1
Fits: Yamaha 2004-2015 50/60HP, 4 Stroke, 2-wire connection, 3-bolt mount, ring terminal ends, includes O-ring.Replaces: Yamaha 6C5-43880-00, 6C5-43880-01, Sierra 18-6836
Arco 6255 Honda / Suzuki Tilt Trim Motor - 6255 - 57-6255F1
Fits: Late model Mercury /Force 25-50 HP outboards, 2-wire connection, 4-bolt mount, Flat-blade shaft, Bullet Connector Terminal Ends.Replaces: Mercury & Force 827675A1, Sierra 18-6286
Arco 6236 Honda / Suzuki Tilt Trim Motor - 6236 - 57-6236F1
Fits: Select HONDA BF75, BF90, 4-bolt mount, Round Plug-In Connector, Includes O-ring, Select SUZUKI 75 & 90hp 4 Stroke.Replaces: Honda 36120-ZY9-003, 36120-ZY9-013, Suzuki DF90TLK7, DF90TXK7, Sierra 18-6743Visit www.arcomarine.com for up to date application information.
Arco 6226 Volvo Penta Sx Tilt Trim Motor - 6226 - 57-6226F1
NEW OEM Premium Replacement Tilt Trim Motor with Reservoir.Fits: SX Late model with coarse thread.Replaces: VOLVO 3587079, 3855745, 3855744, 3855334, 3854030, 3860879, 3858069, 3857489,SIERRA 18-6806
Arco 6206 Omc Tilt Trim Motor - 6206 - 57-6206F1
Fits: OMC 387277, 582048, 582155Replaces: Prestolite EVC4002 3 bolt mount
Arco 60073 Volvo Penta Alternator - 60073 - 57-60073F1
Fits: Late model Volvo Penta, 12 Volt, 75 Amp, 50-mm multi-groove. Serpentine pulley included.Replaces: VOLVO 3862665, 3884950, SIERRA 18-5882, 18-6845
Arco 60072 Volvo Penta Alternator - 60072 - 57-60072F1
Fits: Late model Volvo Penta, 12 Volt, 65 Amp, Multi-groove serpentine pulley included.Replaces: VOLVO 3860082, SIERRA 18-5979
Arco 60070 Volvo Penta Alternator - 60070 - 57-60070F1
3856600 & 3860171 12 volt - 65 ampInternal Regulator2-inch mounting footSingle groove pulley included
Arco 5415 Mercury Starter, 80-115 Hp - 5415 - 57-5415F1
OEM Premium Replacement Starter for Mercury Outboards.Fits: Mercury Marine 80HP - 115HP 4-stroke outboard engines. 2009-2010 80HP Jet Optimax engines.Replaces: MERCURY 879345T77, 8M0038387
Arco 5396 Mercury / Mariner 30-60 Hp Outboard Starter - 5396 - 57-5396F1
Fits: Select Mercury 30-40 HP, 2-cyl, 55-60 HP, 45 HP Jet, 10-tooth drive gear.Replaces: Mercury 50-822462, 50-822462-1, 50-822462T1, 50-893890T, Sierra 18-5621
Arco 5395 Mercury / Mariner 225 Hp Starter - 5395 - 57-5395F1
Fits: Select Mercury/Mariner, 1994-Up 225 HP, 8-tooth drive gearReplaces: Mercury 50-818445-2, 50-818455-3, 50-818445-5, 50-898265009, Sierra 18-5620
Arco 5381X Mercury/ Mariner 150-225 Hp Starter - 5381X - 57-5381Xf1
Fits: Mercury/Mariner, 150-225 HP, 9-tooth drive gearReplaces: MERCURY 50-856996T, 50-86976, 50-898265013, SIERRA 18-5609, 18-6825
Arco 5381 Mercury / Mariner Starter 200-225 Hp - 5381 - 57-5381F1
9-tooth drive gear.Fits: Select Mercury 2.5 DFI, 200 HP V6 DFI, 225 HP V6 DFI, 3.OL V6Replaces: Mercury 50-833153, 50-833153-1, 50-833153-2, 50-833153-3, 50-833153-4, 50-833153-5, 50-898265008, Sierra 18-6283
Arco 5370 Omc Starter 55-75Hp - 5370 - 57-5370F1
3 cylinder 9-tooth drive gearReplaces: OMC 384777, 386657, 391735, 585050, 585058, 586281, 585197, 383691, Sierra 18-5626, 18-5635, 18-5648NOTE: When ordering drive assemblies for O.M.C. starters, be aware that some O.M.C. outboard starters use a 2-piece drive assembly; older O.M.C. starters use a 1-piece drive assembly.
Arco 5365 Mercury 30/40/50/60 Hp Starter - 5365 - 57-5365F1
Fits: Mercury 30/40/50/60 HP 1999 - UP, 3-Cyl, 4 Stroke. Yamaha 2000 - UP 40 HP, 4 Stroke, 9 tooth drive gear.Replaces:Mercury 50-859170T, 50-859170T1, 50-884045T, 50-888160T, 50-893887TYamaha 67C-81800-00, 67C-81800-01, 67C-81800-02 Sierra 18-6438
Arco 5364 Mercury / Yamaha Starter - 5364 - 57-5364F1
Fits: Select Mercury 1998 - up 4 Stroke and Yamaha 25 HP 4 Stroke, 9 tooth drive gearReplaces: Mercury 50-830308, 50-830308T, 888151T, 50-859169T, 50-893886T, Yamaha, 65W-81800-00, 65W-81800-01, 65W-81800-02, 65W-81800-03, Sierra 18-6437
Arco 5361 Omc Starter 9.9-15Hp - 5361 - 57-5361F1
Fits: BRP-OMC 1993 - UP 9.9 - 15 HP, 2" Casing, Small 10 tooth drive gear.Replaces: BRP-OMC 584613, 586274, 778995, SIERRA 18-5617, 18-5710
Arco 5360 Mercury Starter 40-60 Hp - 5360 - 57-5360F1
Fits: Mercury/Mariner 40 HP, 50 HP, 60 HP 4-cyl, 4 Stroke, 9 tooth drive gear. Replaces: Mercury 50-859377T, 50-884044T, 50-888161T, 50-893888T, Sierra 18-6435
Arco 5359 Mercury Starter 9.9-15 Hp - 5359 - 57-5359F1
Fits: Mercury / Mariner 8, 9.9, 13.5, 15 HP 4 Stroke. Yamaha 15 HP, 4 Stroke, 9 tooth drive gear.Replaces: Mercury 50-852570, 50-852570T, 50-857065, 50-859168, 50-859168T, 50-893894Yamaha 66M-81800-01, 66M-81800-02Sierra 18-6943, 18-6829
Arco 5358 Omc Starter 40, 50, 75 & 90 Hp E-Tec - 5358 - 57-5358F1
Fits: Evinrude 40, 50, 75, 90 HP E-Tec Models, 9 tooth drive gear.Replaces:BRP-OMC 586768, 587045, SIERRA 18-6826
Arco 3456 Yamaha Starter 200-250 Hp - 3456 - 57-3456F1
Starter for Yamaha OutboardsFits: 200-250hp - 2003-2009Replaces: Yamaha 60X-81800-01-00, 60X-81800-00-00, 60V-81800-0000 Sierra 18-6832Hitachi S114-863
Arco 3453 Honda And Tohatsu Outboard Starter - 3453 - 57-3453F1
Starter for Honda and Tohatsu OutboardsFits: 75-150hp - 2004-2014Replaces: Honda 31200-ZY6-003, 31200-ZY9-003, 31200-ZY9-H01, 31200-ZY9A-0031Tohatsu HZY631200003, HZY3-31630-003, HZY6-31200-003,HZY9-31200-H01Sierra 18-6959
Arco 3452 Suzuki Starter - 3452 - 57-3452F1
Starter for Suzuki and Johnson-Evinrude OutboardsFits: 70hp-90hp, 150hp-300hp - 2004-2017Replaces: Suzuki 31100-96J02, 31100-96J01,31100-96J00, 31100-93J00Johnson-Evinrude 5035078Sierra 18-6941Hitachi S114-868
Arco 3451 Yamaha Starter 300-425 Hp - 3451 - 57-3451F1
Starter for Yamaha OutboardsFits: 300hp-425hp - 2007-2022Replaces: Yamaha: 6AW-81800-00-00Mitsubishi: M008T71771, M008T71772Sierra Outboard Starter 18-55507
Arco 3450 Yamaha Starter 25-40 Hp - 3450 - 57-3450F1
Starter for Yamaha OutboardsFits: 25hp-40hp - 2009-2022Replaces: Yamaha 6BG-81800-00-00Mitsubishi Outboard Starter M0TA5071Sierra Outboard Starter 18-6964
Arco 3449 Suzuki / Johnson-Evinrude Starter - 3449 - 57-3449F1
Starter for Suzuki & Johnson-Evinrude OutboardsFits: 9.9hp-20hp, 40hp-60hp - 2005-2018Replaces: Suzuki 31100-94J22, 31100-94J21, 31100-94J20, 31100-94J10Johnson-Evinrude 5036244
Arco 3448 Suzuki Starter - 3448 - 57-3448F1
OEM Premium Replacement Starter for Suzuki OutboardFits: Suzuki Outboard 70hp - 100hp, 150-350hp - 2017-2023Replaces:Suzuki 31100-98L10, 31100-98L00Sierra 18-6962Mitsubishi M000TD5872
Arco 3439 Suzuki/Omc Starter - 3439 - 57-3439F1
NEW OEM Premium Replacement Starter for Suzuki Outboard Engines.Fits: Johnson Outboard 2003 - 2006 90HP - 140HP;Suzuki Outboard 2001 - 2009 90HP, 2009 - 2014 100HP, 2001 - 2014 115HP, 2002 - 2014 140HPReplaces: SUZUKI 31100-90J01, SIERRA 18-6831, PROTORQUE PH130-0071
Arco 3437 Yamaha 150-300 Hp - 3437 - 57-3437F1
NEW OEM Premium Replacement Outboard Starter Fits: Yamaha 150HP, 175HP, 200HP, 225HP, 250HP, 300HP 4-Stroke O/B Starter 13 Tooth. Replaces: Hitachi S114-952C, Yamaha 6BC-81800-01-00, Sierra 18-6961.
Arco 3436 Yamaha 200-300 Hp - 3436 - 57-3436F1
NEW OEM Premium Replacement Outboard Starter Fits: Yamaha 200-300HP 4-Stroke O/B Starter 13 Tooth.Replaces: Hitachi S114-8888, Yamaha 6CB-81800-01-00.
Arco 3434 Yamaha 200-225 Hp - 3434 - 57-3434F1
NEW OEM Premium Replacement Outboard Starter Fits: Yamaha 200-225HP 4-Stroke O/B Starter 13 Tooth.Replaces: Hitachi S114-860N, Yamaha 69J-81800-00, 69J-81800-01, Sierra 18-6833.
Arco 30470A Volvo/Mercruiser/Omc Starter - 30470A - 57-30470Af1
NEW OEM Quality Hi Torque, Permanent Magnet, Gear Reduction Starter. 1.7 KW. Fits: Mercruiser, Volvo Penta, OMC, Marine Power and others. Will replace 9 tooth drive OEM versions 3.0 - 8.1L with 14" flywheel. Anodized casting, nickel plated brush holder.Replaces: BRP/ OMC 984456, 986505, 3850525, 3853982, 3854751, 3855177, 3857747, 3860566. Delco 9000735, 9000762, 9000768,9000789, 9000819, 9000821, 9000839, 9000840, 9000849, 9000885, 9000940, 9000884 (Hi Perf). Marine Power 0174-000. Mercury 50-12121A2, 50-12177A2, 50-806964A2, 50-806964A3, 50-806964A4, 50-812428A3, 50-812604A2, 50-822330A2, 50-864340A2, 50-8M8021116, 50-99418A2. Sierra 18-5905, 18-5910, 18-5913, 18-6946. Volvo 3587625, 3857747, 3860566, 3860764, 3885317, 3850525-1, 3853982-1, 3854751-9, 3855177-6, 3856004-1.
Arco 30462 Inboard Starter - Gm - 30462 - 57-30462F1
Fits: 6.0 L GM EnginesReplaces: Delco 9000887, Pleasurecraft RA122019, Sierra 18-6443
Arco 20860 Mercury Verado Outboard Alternator - 20860 - 57-20860F1
Fits: All Mercury Verado Outboards, 12 Volt, 70 AMP, Internal Fan, Multi-groove serpentine pulley included.Replaces: DELCO 19020618, MERCURY 892940T, 892940T01, 892940T02, Sierra 18-5929, Quicksilver 893907A02
Arco 20850 Mercury Outboard Alternator - 20850 - 57-20850F1
12 Volt - 50 AMP 828506, 881247A1 Internal FanMulti-groove serpentine pulley includedIncludes wire/plug connectorWill not replace Mercury 821663A 1
Arco 20840 Mercury Outboard Alternator - 20840 - 57-20840F1
Fits: Select 2.5L Mercury Outboard, 12 Volt, 50 AMP, Internal Fan, 2-inch mounting foot, Multi-groove serpentine pulley included, Includes wire/plug connector.Replaces: Delco 8600515, 19020703, 19020706, Mercury 8M0064021, 8M6000804, 834832, 875285T1, 881248T, 889955A03, 889955T01, Sierra 18-6454, ProTorque PH300-0031
Arco 20830 Marine Power Alternator - 20830 - 57-20830F1
Fits: Marine Power 12 Volt, 70 AMP, Internal Fan, 2-inch mounting foot,Double pulley included, Including wire/plug connector.Replaces: Delco 19020616, Marine Power 471200, 471201 & 4711210, Sierra 18-6299
Arco 20825 Pleasurecraft Alternator - 20825 - 57-20825F1
Internal Fan, 2-inch mounting foot, Single groove pulley included. 12 Volt, 70 AMPFits: Indmar, Pleasurecraft, Crusader, and others.Replaces: Delco 19020608, Pleasurecraft RA097007B, Sierra 18-6288
Arco 20810 Mercruiser Alternator - 20810 - 57-20810F1
Single groove pulley included.12 Volt, 70 AMP, Internal FanFits: Select Mercruiser 3.0LReplaces: Mercury 862030T & 862030T01, Sierra 18-5983, Quicksilver 862030T01 & 862031T
Ancor Premium Battery Cable Stripper - 703075 - 639-703075F1
Premium battery cable stripper punctures the cable's insulation, breaks the insulation free and pulls the cut insulation from the wire in one efficient motion. Strips 8 AWG through 400 MCM cableHeavy duty construction
Ancor Lead Battery Terminal, Wing Nut Style For 5/16" Negative Stud - 260100 - 639-260100F1
Wing nut style. Neg/Pos 5/16" & 3/8".
Ancor Lead Battery Terminal, Wing Nut Style For 3/8" Positive Stud - 260200 - 639-260200F1
Wing nut style. Neg/Pos 5/16" & 3/8".
Ancor Lead Battery Terminal Set Of One Wing Nut Style For 5/16" Negative Stud And One For 3/8" Positive Stud - 260325 - 639-260325F1
Wing nut style. Neg/Pos 5/16" & 3/8".
Ancor Battery Terminal Set Of One Wing Nut Style Yellow Brass Nut For 5/16" Negative Stud And One Tin Copper Battery Terminal For 3/8" Positive Stud - 260322 - 639-260322F1
Wing nut style.
Ancor Battery Terminal Clips, 1 Pr. - 260505 - 639-260505F1
Set of one red and one black 10A copper battery clips.
Ancor Battery Terminal Boot Set Wing Nut Style For #4-#2 (1 Ea. Red And Black) - 260350 - 639-260350F1
Used to prevent the accidental contact of the ungrounded battery to ground. 2 per pack.
Ancor Battery Terminal Boot Right Angle, Red - 260381 - 639-260381F1
Prevent accidental contact of the ungrounded battery to ground. Right angle type.
Ancor Battery Terminal & Post Cleaner - 700103 - 639-700103F1
Wide easy grip. Excellent for hard-to-reach batteries.
Ancor 327648 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 48", Red - 327648 - 639-327648F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327624 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 12" (2/Pack), Yellow - 327924 - 639-327924F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327624 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 12" (2/Pack), Red - 327624 - 639-327624F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327606 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 6" (2/Pack), Yellow - 327906 - 639-327906F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327606 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 3" (2/Pack), Red - 327603 - 639-327603F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327202 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube Combo Pack For 2-4/0 (Includes 1 Ea. Of 1" X 3" Red And Black) - 327202 - 639-327202F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327148 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1 X 48", Black - 327148 - 639-327148F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327124 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 12" (2/Pack), Black - 327124 - 639-327124F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327106 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 6" (2/Pack), Black - 327106 - 639-327106F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327103 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 3" (2/Pack), Black - 327103 - 639-327103F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326924 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 12" Yellow - 326924 - 639-326924F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326903 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 3" Yellow - 326903 - 639-326903F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326648 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 48" Red - 326648 - 639-326648F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326624 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 12" Red - 326624 - 639-326624F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326603 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 3" Red - 326603 - 639-326603F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326202 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube Combo Pack For 8-2/0 (Includes 1 Ea. Of 3/4" X 3" Red And Black) - 326202 - 639-326202F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326148 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 48" Black - 326148 - 639-326148F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326124 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 12" Black - 326124 - 639-326124F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326103 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 3" Black - 326103 - 639-326103F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 270113 Nmea 2000 Power Isolator - 270113 - 639-270113F1
Used for isolating power between 2 independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation.
Ancor 262726 90° Tinned Copper Battery Lug, #4/0, 3/8" Hole, 2/Pk - 262726 - 639-262726F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262725 90° Tinned Copper Battery Lug, #4/0, 5/16" Hole, 2/Pk - 262725 - 639-262725F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262715 90° Tinned Copper Battery Lug, #3/0, 5/16" Hole, 2/Pk - 262715 - 639-262715F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262296 90° Tinned Copper Battery Lug, #2/0, 3/8" Hole, 2/Pk - 262296 - 639-262296F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262295 90° Tinned Copper Battery Lug, #2/0, 5/16" Hole, 2/Pk - 262295 - 639-262295F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262286 90° Tinned Copper Battery Lug, #1/0, 3/8" Hole, 2/Pk - 262286 - 639-262286F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262285 90° Tinned Copper Battery Lug, #1/0, 5/16" Hole, 2/Pk - 262285 - 639-262285F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262276 90° Tinned Copper Battery Lug, #1, 3/8" Hole, 2/Pk - 262276 - 639-262276F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262275 90° Tinned Copper Battery Lug, #1, 5/16" Hole, 2/Pk - 262275 - 639-262275F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262266 90° Tinned Copper Battery Lug, #2, 3/8" Hole, 2/Pk - 262266 - 639-262266F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262265 90° Tinned Copper Battery Lug, #2, 5/16" Hole, 2/Pk - 262265 - 639-262265F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262256 90° Tinned Copper Battery Lug, #4, 3/8" Hole, 2/Pk - 262256 - 639-262256F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262255 90° Tinned Copper Battery Lug, #4, 5/16" Hole, 2/Pk - 262255 - 639-262255F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262246 90° Tinned Copper Battery Lug, #6, 3/8" Hole, 2/Pk - 262246 - 639-262246F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262245 90° Tinned Copper Battery Lug, #6, 5/16" Hole, 2/Pk - 262245 - 639-262245F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 255101 Marine Grade® Battery Lug 100-Pc Kit - 255101 - 639-255101F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.Includes: (10) 8 AWG, 5/16", (10) 8 AWG, 3/8", (10) 6 AWG, 5/16", (10) 6 AWG, 3/8", (10) 4 AWG, 5/16", (10) 4 AWG, 3/8", (10) 2 AWG, 5/16", (10) 2 AWG, 3/8", (5) 1/0 AWG, 5/16", (5) 1/0 AWG, 3/8", (5) 2/0 AWG, 5/16", (5) 2/0 AWG, 3/8".
Ancor 252727 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 4/0 Cable, 2/Pk - 252727 - 639-252727F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252726 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 4/0 Cable, 2/Pk - 252726 - 639-252726F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252725 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 4/0 Cable, 2/Pk - 252725 - 639-252725F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252717 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 3/0 Cable, 2/Pk - 252717 - 639-252717F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252716 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 3/0 Cable, 2/Pk - 252716 - 639-252716F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252297 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 2/0 Cable, 2/Pk - 252297 - 639-252297F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252296 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 2/0 Cable, 2/Pk - 252296 - 639-252296F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252295 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 2/0 Cable, 2/Pk - 252295 - 639-252295F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252287 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 1/0 Cable, 2/Pk - 252287 - 639-252287F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252286 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 1/0 Cable, 2/Pk - 252286 - 639-252286F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252285 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 1/0 Cable, 2/Pk - 252285 - 639-252285F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252284 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, 1/0 Cable, 2/Pk - 252284 - 639-252284F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252277 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #1 Cable, 2/Pk - 252277 - 639-252277F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252276 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #1 Cable, 2/Pk - 252276 - 639-252276F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252275 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #1 Cable, 2/Pk - 252275 - 639-252275F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252274 Marine Grade™ Tinned Battery Lugs, 1/4" Fastener, #1 Cable, 2/Pk - 252274 - 639-252274F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252267 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #2 Cable, 2/Pk - 252267 - 639-252267F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252266 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #2 Cable, 2/Pk - 252266 - 639-252266F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252265 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #2 Cable, 2/Pk - 252265 - 639-252265F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252264 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #2 Cable, 2/Pk - 252264 - 639-252264F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252261 Marine Grade® Tinned Battery Lugs, 5/16" & 3/8" Fastener, #2 Cable, 1/1/Pk - 252261 - 639-252261F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252257 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #4 Cable, 2/Pk - 252257 - 639-252257F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252256 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #4 Cable, 2/Pk - 252256 - 639-252256F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252255 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #4 Cable, 2/Pk - 252255 - 639-252255F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252254 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #4 Cable, 2/Pk - 252254 - 639-252254F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252253 Marine Grade® Tinned Battery Lugs, #10 Fastener, #4 Cable, 2/Pk - 252253 - 639-252253F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252251 Marine Grade® Tinned Battery Lugs, 5/16" & 3/8" Fastener, #4 Cable, 1/1/Pk - 252251 - 639-252251F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252246 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #6 Cable, 2/Pk - 252246 - 639-252246F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252245 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #6 Cable, 2/Pk - 252245 - 639-252245F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252244 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #6 Cable, 2/Pk - 252244 - 639-252244F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252243 Marine Grade® Tinned Battery Lugs, #10 Fastener, #6 Cable, 2/Pk - 252243 - 639-252243F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252241 Marine Grade® Tinned Battery Lugs, 5/16" & 3/8" Fastener, #6 Cable, 1/1/Pk - 252241 - 639-252241F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252237 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #8 Cable, 2/Pk - 252237 - 639-252237F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252236 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #8 Cable, 2/Pk - 252236 - 639-252236F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252235 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #8 Cable, 2/Pk - 252235 - 639-252235F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252234 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #8 Cable, 2/Pk - 252234 - 639-252234F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252233 Marine Grade® Tinned Battery Lugs, #10 Fastener, #8 Cable, 2/Pk - 252233 - 639-252233F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244726 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 4/0 Cable, 100/Pk - 244726 - 639-244726F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244296 Marine Grade® Tinned Battery Lugs, 3/8 Fastener, 2/0 Cable, 100/Pk - 244296 - 639-244296F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244295 Marine Grade™ Tinned Battery Lugs, 5/16" Fastener, 2/0 Cable, 100/Pk - 244295 - 639-244295F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244286 Marine Grade™ Tinned Battery Lugs, 3/8" Fastener, 1/0 Cable, 100/Pk - 244286 - 639-244286F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244285 Marine Grade™ Tinned Battery Lugs, 5/16" Fastener, 1/0 Cable, 100/Pk - 244285 - 639-244285F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244266 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #2 Cable, 100/Pk - 244266 - 639-244266F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244265 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #2 Cable, 100/Pk - 244265 - 639-244265F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244256 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #4 Cable, 100/Pk - 244256 - 639-244256F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244255 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #4 Cable, 100/Pk - 244255 - 639-244255F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244254 Marine Grade™ Tinned Battery Lugs, 1/4" Fastener, #4 Cable, 100/Pk - 244254 - 639-244254F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244246 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #6 Cable, 100/Pk - 244246 - 639-244246F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244245 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #6 Cable, 100/Pk - 244245 - 639-244245F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244236 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #8 Cable, 100/Pk - 244236 - 639-244236F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244235 Marine Grade® Tinned Battery Lugs, 5/16 Fastener, #8 Cable, 100/Pk - 244235 - 639-244235F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244234 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #8 Cable, 100/Pk - 244234 - 639-244234F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244233 Marine Grade® Tinned Battery Lugs, #10 Fastener, #8 Cable, 100/Pk - 244233 - 639-244233F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242727 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 4/0 Cable, 10/Pk - 242727 - 639-242727F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242726 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 4/0 Cable, 10/Pk - 242726 - 639-242726F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242725 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 4/0 Cable, 10/Pk - 242725 - 639-242725F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242716 Marine Grade™ Tinned Battery Lugs, 3/8" Fastener, 3/0 Cable, 10/Pk - 242716 - 639-242716F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242715 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 3/0 Cable, 10/Pk - 242715 - 639-242715F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242297 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 2/0 Cable, 10/Pk - 242297 - 639-242297F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242296 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 2/0 Cable, 25/Pk - 242296 - 639-242296F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242295 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 2/0 Cable, 25/Pk - 242295 - 639-242295F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242294 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, 2/0 Cable, 25/Pk - 242294 - 639-242294F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242286 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 1/0 Cable, 25/Pk - 242286 - 639-242286F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242285 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 1/0 Cable, 25/Pk - 242285 - 639-242285F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242276 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #1 Cable, 25/Pk - 242276 - 639-242276F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242275 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #1 Cable, 25/Pk - 242275 - 639-242275F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242266 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #2 Cable, 25/Pk - 242266 - 639-242266F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242265 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #2 Cable, 25/Pk - 242265 - 639-242265F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242264 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #2 Cable, 25/Pk - 242264 - 639-242264F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242257 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #4 Cable, 10/Pk - 242257 - 639-242257F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242256 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #4 Cable, 25/Pk - 242256 - 639-242256F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242255 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #4 Cable, 25/Pk - 242255 - 639-242255F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242254 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #4 Cable, 25/Pk - 242254 - 639-242254F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242253 Marine Grade® Tinned Battery Lugs, #10 Fastener, #4 Cable, 25/Pk - 242253 - 639-242253F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242246 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #6 Cable, 25/Pk - 242246 - 639-242246F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242245 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #6 Cable, 25/Pk - 242245 - 639-242245F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242244 Marine Grade™ Tinned Battery Lugs, 1/4" Fastener, #6 Cable, 25/Pk - 242244 - 639-242244F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242243 Marine Grade® Tinned Battery Lugs, #10 Fastener, #6 Cable, 25/Pk - 242243 - 639-242243F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242237 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #8 Cable, 10/Pk - 242237 - 639-242237F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242236 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #8 Cable, 25/Pk - 242236 - 639-242236F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242235 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #8 Cable, 25/Pk - 242235 - 639-242235F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242234 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #8 Cable, 25/Pk - 242234 - 639-242234F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242233 Marine Grade® Tinned Battery Lugs, #10 Fastener, #8 Cable, 25/Pk - 242233 - 639-242233F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 189147 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 48", Red - 189147 - 639-189147F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189146 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 48", Black - 189146 - 639-189146F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189145 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 32", Red - 189145 - 639-189145F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189144 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 32", Black - 189144 - 639-189144F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189141 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 18", Red - 189141 - 639-189141F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189140 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 18", Black - 189140 - 639-189140F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189137 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 48", Red - 189137 - 639-189137F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189136 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 48", Black - 189136 - 639-189136F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189135 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 32", Red - 189135 - 639-189135F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189134 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 32", Black - 189134 - 639-189134F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189131 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 18", Red - 189131 - 639-189131F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189130 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 18", Black - 189130 - 639-189130F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 119905 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 50', Yellow - 119905 - 639-119905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119902 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 25', Yellow - 119902 - 639-119902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119505 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 50', Red - 119505 - 639-119505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119502 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 25', Red - 119502 - 639-119502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
