Batteries & Charging
1-Pc. Replacement Drive Gear - Dv372 - 57-Dv372F1
15" Length High Flow Hose For High Capacity Regulators, Red Nut - Mer425H-15P - 277-Mer425H15Pf1
The High Flow Series Hoses are specifically designed to meet the high demands of today's motorhomes, trailers and on demand water heaters. High Flow Type I 400,000 BTU (red nut) pigtails are designed for those applications that require more than 200,000 BTU's. The High Flow pigtails are designed with both excess flow and thermal link safety features, same as the green nut Type I. 400,000 BTU'sExcess flow safety shut-offRVIA and NFPA 1192 CompliantBrass ferrules1/4" ID High pressure thermoplastic hose100% Leak tested350 PSIG working pressureInclude a Female QCC, Type 1 Connection and a 1/4" male inverted flare fitting
18-8852 Battery Cable Red 4 Ga - Bc88523 - 11-Bc88523F1
Features a soldered lug terminal on each end to accept a 3/8" stud.
18-8853 Battery Cable Black 4 Ga - Bc88533 - 11-Bc88533F1
Features a soldered lug terminal on each end to accept a 3/8" stud.
24" Length High Flow Hose For High Capacity Regulators. - Mer425H-24P - 277-Mer425H24Pf1
400,000 BTU'sExcess flow safety shut-offRVIA and NFPA 1192 CompliantBrass ferrules1/4" ID High pressure thermoplastic hose100% Leak tested350 PSIG working pressureInclude a Female QCC, Type 1 Connection and a 1/4" male inverted flare fitting
3 Wire Rectifier - Ar103 - 57-Ar103F1
Replaces: OMC 580841, 581305, 582307, & 582399.
3-Post Heavy-Duty Outboard Rectifier - Ar351 - 57-Ar351F1
5.0L, 5.8L Ford Starter - 70125 - 57-70125F1
Replaces: OMC 987811 & Volvo 3854190-0 Permanent magnet12 volt
772Dbcez Bep Pro Installer 400A Ez-Mount Battery Switch, 1, Both - 772-Dbc-Ez - 969-772Dbcezf1
These revolutionary battery switches allow you to wire from the front. Installation and cabling is easy and accessible. With their shared interconnection height, EZ-Mount battery switches cluster directly with the Pro Installer Busbar Range, resulting in the fast, compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches. Tested to UL1107 ignition protection, CETinned copper 3/8" (10mm) studsStainless steel washers/nuts400A Continuous / 600A 5 mins Intermittent / 1500A 10 secs CrankingWaterproof to IP66Removable knob allows isolation during servicing3 removable sideplates for protectionIndustry standard 3.85" x 3.85" footprint
8D Battery Box - 90-2169 - 100-902169F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
8D High Battery Box - 90-2170 - 100-902170F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
Add-A-Battery (Dual Circuit System) - 7650-Bss - 661-7650F1
Simplifies switching and automates charging for a complete two battery bank solution. The package includes
Alkaline Batteries, Aaa Size - Pc2400 - 711-Pc2400F1
Alt F/Outboard Mercury Engines - 20851 - 57-20851F1
Alt F/Outboard Motor/Starter Mercury Marine - 20852 - 57-20852F1
Alternator - 20102 - 57-20102F1
12 volt - 70 amp Self excitingIgnition protection screens internal regulator, negative ground and single groove pulley
Alternator - 20104 - 57-20104F1
12 volt - 70 amp Self excitingIgnition protection screens internal regulator, negative ground and single groove pulley
Alternator - Universal - 60075 - 57-60075F1
O.E.M. Universal alternator w/ many applicationsFits: Yamaha, Marine Power, CrusaderReplaces: Motorola 12 Volt, 55 Amp, Internal regulatorIncludes: Tachometer terminal, indicator light terminal, remote battery sensing terminal 1-inch mounting foot & 3-ear adjustment.Single groove pulley included.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 60Yp100Sv - 684-60Yp100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 60Yp70Sv - 684-60Yp70Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley. YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 621Vup70Sv - 684-621Vup70Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley. VUP models: Fit engines using a 1" or 2" single foot (spool) mount for many 4.3-5.7L Mercruiser, Volvo Penta, Pleasurecraft, Crusader & other GM gas, Volvo, Cummins, Yanmar 6LP, Westerbeke diesels with Delco & Motorola-equipped alternators.
Alternator Pleasurecraft - 20822 - 57-20822F1
Fits: Pleasurecraft RA097007C Replaces: Delco 840002765mm serpentine pully
Ancor 111002 Marine Grade™ Tinned Copper Battery Cable, #8 Awg, 25', Black - 111002 - 639-111002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111005 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 50', Black - 111005 - 639-111005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111010 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Black - 111010 - 639-111010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111025 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 250', Black - 111025 - 639-111025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111050 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 500', Black - 111050 - 639-111050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111302 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 25', Green - 111302 - 639-111302F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111305 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 50', Green - 111305 - 639-111305F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111310 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Green - 111310 - 639-111310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111325 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 250', Green - 111325 - 639-111325F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111505 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 50', Red - 111505 - 639-111505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111510 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Red - 111510 - 639-111510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111525 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 250', Red - 111525 - 639-111525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111550 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 500', Red - 111550 - 639-111550F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111710 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', White - 111710 - 639-111710F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111910 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Yellow - 111910 - 639-111910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112002 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 25', Black - 112002 - 639-112002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112005 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Black - 112005 - 639-112005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112010 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Black - 112010 - 639-112010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112025 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 250', Black - 112025 - 639-112025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112050 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 500', Black - 112050 - 639-112050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112305 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Green - 112305 - 639-112305F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112310 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Green - 112310 - 639-112310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112325 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 250', Green - 112325 - 639-112325F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112502 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 25', Red - 112502 - 639-112502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112505 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Red - 112505 - 639-112505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112510 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Red - 112510 - 639-112510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112525 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 250', Red - 112525 - 639-112525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112710 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', White - 112710 - 639-112710F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112905 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Yellow - 112905 - 639-112905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112910 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Yellow - 112910 - 639-112910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113002 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 25', Black - 113002 - 639-113002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113005 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 50', Black - 113005 - 639-113005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113010 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 100', Black - 113010 - 639-113010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113025 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 250', Black - 113025 - 639-113025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113050 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 500', Black - 113050 - 639-113050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113505 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 50', Red - 113505 - 639-113505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113510 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 100', Red - 113510 - 639-113510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113525 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 250', Red - 113525 - 639-113525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113550 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 500', Red - 113550 - 639-113550F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113905 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 50', Yellow - 113905 - 639-113905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113910 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 100', Yellow - 113910 - 639-113910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114002 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 25', Black - 114002 - 639-114002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114005 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 50', Black - 114005 - 639-114005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114010 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 100', Black - 114010 - 639-114010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114025 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 250', Black - 114025 - 639-114025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114040 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 400', Black - 114040 - 639-114040F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114502 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 25', Red - 114502 - 639-114502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114505 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 50', Red - 114505 - 639-114505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114510 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 100', Red - 114510 - 639-114510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114540 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 400', Red - 114540 - 639-114540F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114902 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 25', Yellow - 114902 - 639-114902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114905 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 50', Yellow - 114905 - 639-114905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114910 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 100', Yellow - 114910 - 639-114910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115002 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 25', Black - 115002 - 639-115002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115005 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 50', Black - 115005 - 639-115005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115010 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 100', Black - 115010 - 639-115010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115030 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 300', Black - 115030 - 639-115030F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115502 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 25', Red - 115502 - 639-115502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115505 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 50', Red - 115505 - 639-115505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115510 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 100', Red - 115510 - 639-115510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115530 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 300', Red - 115530 - 639-115530F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115902 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 25', Yellow - 115902 - 639-115902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115905 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 50', Yellow - 115905 - 639-115905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115910 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 100', Yellow - 115910 - 639-115910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116002 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 25', Black - 116002 - 639-116002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116005 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 50', Black - 116005 - 639-116005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116010 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 100', Black - 116010 - 639-116010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116025 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 250', Black - 116025 - 639-116025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116502 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 25', Red - 116502 - 639-116502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116505 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 50', Red - 116505 - 639-116505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116510 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 100', Red - 116510 - 639-116510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116525 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 250', Red - 116525 - 639-116525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116902 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 25', Yellow - 116902 - 639-116902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116905 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 50', Yellow - 116905 - 639-116905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116910 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 100', Yellow - 116910 - 639-116910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 116925 Marine Grade® Tinned Copper Battery Cable, 1/0 Awg, 250', Yellow - 116925 - 639-116925F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117002 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 25', Black - 117002 - 639-117002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117005 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 50', Black - 117005 - 639-117005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117010 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 100', Black - 117010 - 639-117010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117020 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 200', Black - 117020 - 639-117020F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117502 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 25', Red - 117502 - 639-117502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117505 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 50', Red - 117505 - 639-117505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117510 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 100', Red - 117510 - 639-117510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117520 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 200', Red - 117520 - 639-117520F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117902 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 25', Yellow - 117902 - 639-117902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117905 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 50', Yellow - 117905 - 639-117905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117910 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 100', Yellow - 117910 - 639-117910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 117920 Marine Grade® Tinned Copper Battery Cable, 2/0 Awg, 200', Yellow - 117920 - 639-117920F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 118005 Marine Grade® Tinned Copper Battery Cable, 3/0 Awg, 50', Black - 118005 - 639-118005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 118015 Marine Grade® Tinned Copper Battery Cable, 3/0 Awg, 150', Black - 118015 - 639-118015F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 118505 Marine Grade® Tinned Copper Battery Cable, 3/0 Awg, 50', Red - 118505 - 639-118505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 118515 Marine Grade® Tinned Copper Battery Cable, 3/0 Awg, 150', Red - 118515 - 639-118515F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 118905 Marine Grade® Tinned Copper Battery Cable, 3/0 Awg, 50', Yellow - 118905 - 639-118905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 118910 Marine Grade® Tinned Copper Battery Cable, 3/0 Awg, 100', Yellow - 118910 - 639-118910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119002 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 25', Black - 119002 - 639-119002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119005 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 50', Black - 119005 - 639-119005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119010_Collision Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 100', Black - 119010_Collision - 639-119010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119502 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 25', Red - 119502 - 639-119502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119505 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 50', Red - 119505 - 639-119505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119902 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 25', Yellow - 119902 - 639-119902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 119905 Marine Grade® Tinned Copper Battery Cable, 4/0 Awg, 50', Yellow - 119905 - 639-119905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 189130 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 18", Black - 189130 - 639-189130F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189131 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 18", Red - 189131 - 639-189131F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189134 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 32", Black - 189134 - 639-189134F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189135 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 32", Red - 189135 - 639-189135F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189136 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 48", Black - 189136 - 639-189136F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189137 Marine Grade® Tinned Copper Battery Cable Assembly, 4 Awg, 48", Red - 189137 - 639-189137F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189140 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 18", Black - 189140 - 639-189140F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189141 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 18", Red - 189141 - 639-189141F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189144 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 32", Black - 189144 - 639-189144F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189145 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 32", Red - 189145 - 639-189145F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189146 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 48", Black - 189146 - 639-189146F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 189147 Marine Grade® Tinned Copper Battery Cable Assembly, 2 Awg, 48", Red - 189147 - 639-189147F1
Manufactured with Ancor's premium UL1426 tin copper battery cable. Flame retardant, UV inhibited, rated to 600V and 105° celsius. Lugs are tin copper to avoid corrosion and last longer. Each end has a piece of Ancor's adhesive lined 3:1 heatshrink tubing placed over the electrical connection. The heatshrink tubing seals out moisture and other corrosive elements found in the marine environment.
Ancor 242233 Marine Grade® Tinned Battery Lugs, #10 Fastener, #8 Cable, 25/Pk - 242233 - 639-242233F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242234 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #8 Cable, 25/Pk - 242234 - 639-242234F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242235 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #8 Cable, 25/Pk - 242235 - 639-242235F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242236 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #8 Cable, 25/Pk - 242236 - 639-242236F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242237 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #8 Cable, 10/Pk - 242237 - 639-242237F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242243 Marine Grade® Tinned Battery Lugs, #10 Fastener, #6 Cable, 25/Pk - 242243 - 639-242243F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242244 Marine Grade™ Tinned Battery Lugs, 1/4" Fastener, #6 Cable, 25/Pk - 242244 - 639-242244F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242245 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #6 Cable, 25/Pk - 242245 - 639-242245F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242246 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #6 Cable, 25/Pk - 242246 - 639-242246F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242253 Marine Grade® Tinned Battery Lugs, #10 Fastener, #4 Cable, 25/Pk - 242253 - 639-242253F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242254 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #4 Cable, 25/Pk - 242254 - 639-242254F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242255 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #4 Cable, 25/Pk - 242255 - 639-242255F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242256 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #4 Cable, 25/Pk - 242256 - 639-242256F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242257 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #4 Cable, 10/Pk - 242257 - 639-242257F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242264 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #2 Cable, 25/Pk - 242264 - 639-242264F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242265 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #2 Cable, 25/Pk - 242265 - 639-242265F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242266 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #2 Cable, 25/Pk - 242266 - 639-242266F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242275 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #1 Cable, 25/Pk - 242275 - 639-242275F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242276 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #1 Cable, 25/Pk - 242276 - 639-242276F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242285 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 1/0 Cable, 25/Pk - 242285 - 639-242285F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242286 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 1/0 Cable, 25/Pk - 242286 - 639-242286F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242294 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, 2/0 Cable, 25/Pk - 242294 - 639-242294F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242295 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 2/0 Cable, 25/Pk - 242295 - 639-242295F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242296 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 2/0 Cable, 25/Pk - 242296 - 639-242296F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242297 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 2/0 Cable, 10/Pk - 242297 - 639-242297F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242715 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 3/0 Cable, 10/Pk - 242715 - 639-242715F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242716 Marine Grade™ Tinned Battery Lugs, 3/8" Fastener, 3/0 Cable, 10/Pk - 242716 - 639-242716F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242725 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 4/0 Cable, 10/Pk - 242725 - 639-242725F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242726 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 4/0 Cable, 10/Pk - 242726 - 639-242726F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 242727 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 4/0 Cable, 10/Pk - 242727 - 639-242727F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244233 Marine Grade® Tinned Battery Lugs, #10 Fastener, #8 Cable, 100/Pk - 244233 - 639-244233F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244234 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #8 Cable, 100/Pk - 244234 - 639-244234F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244235 Marine Grade® Tinned Battery Lugs, 5/16 Fastener, #8 Cable, 100/Pk - 244235 - 639-244235F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244236 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #8 Cable, 100/Pk - 244236 - 639-244236F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244245 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #6 Cable, 100/Pk - 244245 - 639-244245F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244246 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #6 Cable, 100/Pk - 244246 - 639-244246F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244254 Marine Grade™ Tinned Battery Lugs, 1/4" Fastener, #4 Cable, 100/Pk - 244254 - 639-244254F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244255 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #4 Cable, 100/Pk - 244255 - 639-244255F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244256 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #4 Cable, 100/Pk - 244256 - 639-244256F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244265 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #2 Cable, 100/Pk - 244265 - 639-244265F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244266 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #2 Cable, 100/Pk - 244266 - 639-244266F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244285 Marine Grade™ Tinned Battery Lugs, 5/16" Fastener, 1/0 Cable, 100/Pk - 244285 - 639-244285F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244286 Marine Grade™ Tinned Battery Lugs, 3/8" Fastener, 1/0 Cable, 100/Pk - 244286 - 639-244286F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244295 Marine Grade™ Tinned Battery Lugs, 5/16" Fastener, 2/0 Cable, 100/Pk - 244295 - 639-244295F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244296 Marine Grade® Tinned Battery Lugs, 3/8 Fastener, 2/0 Cable, 100/Pk - 244296 - 639-244296F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 244726 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 4/0 Cable, 100/Pk - 244726 - 639-244726F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252233 Marine Grade® Tinned Battery Lugs, #10 Fastener, #8 Cable, 2/Pk - 252233 - 639-252233F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252234 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #8 Cable, 2/Pk - 252234 - 639-252234F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252235 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #8 Cable, 2/Pk - 252235 - 639-252235F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252236 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #8 Cable, 2/Pk - 252236 - 639-252236F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252237 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #8 Cable, 2/Pk - 252237 - 639-252237F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252241 Marine Grade® Tinned Battery Lugs, 5/16" & 3/8" Fastener, #6 Cable, 1/1/Pk - 252241 - 639-252241F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252243 Marine Grade® Tinned Battery Lugs, #10 Fastener, #6 Cable, 2/Pk - 252243 - 639-252243F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252244 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #6 Cable, 2/Pk - 252244 - 639-252244F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252245 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #6 Cable, 2/Pk - 252245 - 639-252245F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252246 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #6 Cable, 2/Pk - 252246 - 639-252246F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252251 Marine Grade® Tinned Battery Lugs, 5/16" & 3/8" Fastener, #4 Cable, 1/1/Pk - 252251 - 639-252251F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252253 Marine Grade® Tinned Battery Lugs, #10 Fastener, #4 Cable, 2/Pk - 252253 - 639-252253F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252254 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #4 Cable, 2/Pk - 252254 - 639-252254F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252255 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #4 Cable, 2/Pk - 252255 - 639-252255F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252256 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #4 Cable, 2/Pk - 252256 - 639-252256F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252257 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #4 Cable, 2/Pk - 252257 - 639-252257F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252261 Marine Grade® Tinned Battery Lugs, 5/16" & 3/8" Fastener, #2 Cable, 1/1/Pk - 252261 - 639-252261F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252264 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, #2 Cable, 2/Pk - 252264 - 639-252264F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252265 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #2 Cable, 2/Pk - 252265 - 639-252265F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252266 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #2 Cable, 2/Pk - 252266 - 639-252266F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252267 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #2 Cable, 2/Pk - 252267 - 639-252267F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252274 Marine Grade™ Tinned Battery Lugs, 1/4" Fastener, #1 Cable, 2/Pk - 252274 - 639-252274F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252275 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, #1 Cable, 2/Pk - 252275 - 639-252275F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252276 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, #1 Cable, 2/Pk - 252276 - 639-252276F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252277 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, #1 Cable, 2/Pk - 252277 - 639-252277F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252284 Marine Grade® Tinned Battery Lugs, 1/4" Fastener, 1/0 Cable, 2/Pk - 252284 - 639-252284F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252285 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 1/0 Cable, 2/Pk - 252285 - 639-252285F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252286 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 1/0 Cable, 2/Pk - 252286 - 639-252286F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252287 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 1/0 Cable, 2/Pk - 252287 - 639-252287F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252295 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 2/0 Cable, 2/Pk - 252295 - 639-252295F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252296 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 2/0 Cable, 2/Pk - 252296 - 639-252296F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252297 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 2/0 Cable, 2/Pk - 252297 - 639-252297F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252716 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 3/0 Cable, 2/Pk - 252716 - 639-252716F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252717 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 3/0 Cable, 2/Pk - 252717 - 639-252717F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252725 Marine Grade® Tinned Battery Lugs, 5/16" Fastener, 4/0 Cable, 2/Pk - 252725 - 639-252725F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252726 Marine Grade® Tinned Battery Lugs, 3/8" Fastener, 4/0 Cable, 2/Pk - 252726 - 639-252726F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 252727 Marine Grade® Tinned Battery Lugs, 1/2" Fastener, 4/0 Cable, 2/Pk - 252727 - 639-252727F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.
Ancor 255101 Marine Grade® Battery Lug 100-Pc Kit - 255101 - 639-255101F1
Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Closed end to seal out moisture.Includes: (10) 8 AWG, 5/16", (10) 8 AWG, 3/8", (10) 6 AWG, 5/16", (10) 6 AWG, 3/8", (10) 4 AWG, 5/16", (10) 4 AWG, 3/8", (10) 2 AWG, 5/16", (10) 2 AWG, 3/8", (5) 1/0 AWG, 5/16", (5) 1/0 AWG, 3/8", (5) 2/0 AWG, 5/16", (5) 2/0 AWG, 3/8".
Ancor 262245 90° Tinned Copper Battery Lug, #6, 5/16" Hole, 2/Pk - 262245 - 639-262245F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262246 90° Tinned Copper Battery Lug, #6, 3/8" Hole, 2/Pk - 262246 - 639-262246F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262255 90° Tinned Copper Battery Lug, #4, 5/16" Hole, 2/Pk - 262255 - 639-262255F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262256 90° Tinned Copper Battery Lug, #4, 3/8" Hole, 2/Pk - 262256 - 639-262256F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262265 90° Tinned Copper Battery Lug, #2, 5/16" Hole, 2/Pk - 262265 - 639-262265F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262266 90° Tinned Copper Battery Lug, #2, 3/8" Hole, 2/Pk - 262266 - 639-262266F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262275 90° Tinned Copper Battery Lug, #1, 5/16" Hole, 2/Pk - 262275 - 639-262275F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262276 90° Tinned Copper Battery Lug, #1, 3/8" Hole, 2/Pk - 262276 - 639-262276F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262285 90° Tinned Copper Battery Lug, #1/0, 5/16" Hole, 2/Pk - 262285 - 639-262285F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262286 90° Tinned Copper Battery Lug, #1/0, 3/8" Hole, 2/Pk - 262286 - 639-262286F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262295 90° Tinned Copper Battery Lug, #2/0, 5/16" Hole, 2/Pk - 262295 - 639-262295F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262296 90° Tinned Copper Battery Lug, #2/0, 3/8" Hole, 2/Pk - 262296 - 639-262296F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262715 90° Tinned Copper Battery Lug, #3/0, 5/16" Hole, 2/Pk - 262715 - 639-262715F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262725 90° Tinned Copper Battery Lug, #4/0, 5/16" Hole, 2/Pk - 262725 - 639-262725F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262726 90° Tinned Copper Battery Lug, #4/0, 3/8" Hole, 2/Pk - 262726 - 639-262726F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 270113 Nmea 2000 Power Isolator - 270113 - 639-270113F1
Used for isolating power between 2 independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation.
Ancor 326103 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 3" Black - 326103 - 639-326103F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326124 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 12" Black - 326124 - 639-326124F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326148 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 48" Black - 326148 - 639-326148F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326202 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube Combo Pack For 8-2/0 (Includes 1 Ea. Of 3/4" X 3" Red And Black) - 326202 - 639-326202F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326603 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 3" Red - 326603 - 639-326603F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326624 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 12" Red - 326624 - 639-326624F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326648 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 48" Red - 326648 - 639-326648F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326903 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 3" Yellow - 326903 - 639-326903F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 326924 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 8-2/0, 12" Yellow - 326924 - 639-326924F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327103 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 3" (2/Pack), Black - 327103 - 639-327103F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327106 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 6" (2/Pack), Black - 327106 - 639-327106F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327124 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 12" (2/Pack), Black - 327124 - 639-327124F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327148 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1 X 48", Black - 327148 - 639-327148F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327202 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube Combo Pack For 2-4/0 (Includes 1 Ea. Of 1" X 3" Red And Black) - 327202 - 639-327202F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327606 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 3" (2/Pack), Red - 327603 - 639-327603F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327606 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 6" (2/Pack), Yellow - 327906 - 639-327906F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327624 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 12" (2/Pack), Red - 327624 - 639-327624F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327624 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 12" (2/Pack), Yellow - 327924 - 639-327924F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor 327648 Marine Grade Heat Shrink Heavy Wall Battery Cable Tube For 2-4/0, 1" X 48", Red - 327648 - 639-327648F1
Shrinks to form a tight seal and the ultimate in vibration and strain relief.
Ancor Battery Terminal & Post Cleaner - 700103 - 639-700103F1
Wide easy grip. Excellent for hard-to-reach batteries.
Ancor Battery Terminal Boot Right Angle, Red - 260381 - 639-260381F1
Prevent accidental contact of the ungrounded battery to ground. Right angle type.
Ancor Battery Terminal Boot Set Wing Nut Style For #4-#2 (1 Ea. Red And Black) - 260350 - 639-260350F1
Used to prevent the accidental contact of the ungrounded battery to ground. 2 per pack.
Ancor Battery Terminal Clips, 1 Pr. - 260505 - 639-260505F1
Set of one red and one black 10A copper battery clips.
Ancor Battery Terminal Set Of One Wing Nut Style Yellow Brass Nut For 5/16" Negative Stud And One Tin Copper Battery Terminal For 3/8" Positive Stud - 260322 - 639-260322F1
Wing nut style.
Ancor Lead Battery Terminal Set Of One Wing Nut Style For 5/16" Negative Stud And One For 3/8" Positive Stud - 260325 - 639-260325F1
Wing nut style. Neg/Pos 5/16" & 3/8".
Ancor Lead Battery Terminal, Wing Nut Style For 3/8" Positive Stud - 260200 - 639-260200F1
Wing nut style. Neg/Pos 5/16" & 3/8".
Ancor Lead Battery Terminal, Wing Nut Style For 5/16" Negative Stud - 260100 - 639-260100F1
Wing nut style. Neg/Pos 5/16" & 3/8".
Ancor Premium Battery Cable Stripper - 703075 - 639-703075F1
Premium battery cable stripper punctures the cable's insulation, breaks the insulation free and pulls the cut insulation from the wire in one efficient motion. Strips 8 AWG through 400 MCM cableHeavy duty construction
Arco 20810 Mercruiser Alternator - 20810 - 57-20810F1
Single groove pulley included.12 Volt, 70 AMP, Internal FanFits: Select Mercruiser 3.0LReplaces: Mercury 862030T & 862030T01, Sierra 18-5983, Quicksilver 862030T01 & 862031T
Arco 20825 Pleasurecraft Alternator - 20825 - 57-20825F1
Internal Fan, 2-inch mounting foot, Single groove pulley included. 12 Volt, 70 AMPFits: Indmar, Pleasurecraft, Crusader, and others.Replaces: Delco 19020608, Pleasurecraft RA097007B, Sierra 18-6288
Arco 20830 Marine Power Alternator - 20830 - 57-20830F1
Fits: Marine Power 12 Volt, 70 AMP, Internal Fan, 2-inch mounting foot,Double pulley included, Including wire/plug connector.Replaces: Delco 19020616, Marine Power 471200, 471201 & 4711210, Sierra 18-6299
Arco 20840 Mercury Outboard Alternator - 20840 - 57-20840F1
Fits: Select 2.5L Mercury Outboard, 12 Volt, 50 AMP, Internal Fan, 2-inch mounting foot, Multi-groove serpentine pulley included, Includes wire/plug connector.Replaces: Delco 8600515, 19020703, 19020706, Mercury 8M0064021, 8M6000804, 834832, 875285T1, 881248T, 889955A03, 889955T01, Sierra 18-6454, ProTorque PH300-0031
Arco 20850 Mercury Outboard Alternator - 20850 - 57-20850F1
12 Volt - 50 AMP 828506, 881247A1 Internal FanMulti-groove serpentine pulley includedIncludes wire/plug connectorWill not replace Mercury 821663A 1
Arco 20860 Mercury Verado Outboard Alternator - 20860 - 57-20860F1
Fits: All Mercury Verado Outboards, 12 Volt, 70 AMP, Internal Fan, Multi-groove serpentine pulley included.Replaces: DELCO 19020618, MERCURY 892940T, 892940T01, 892940T02, Sierra 18-5929, Quicksilver 893907A02
Arco 30462 Inboard Starter - Gm - 30462 - 57-30462F1
Fits: 6.0 L GM EnginesReplaces: Delco 9000887, Pleasurecraft RA122019, Sierra 18-6443
Arco 30470A Volvo/Mercruiser/Omc Starter - 30470A - 57-30470Af1
NEW OEM Quality Hi Torque, Permanent Magnet, Gear Reduction Starter. 1.7 KW. Fits: Mercruiser, Volvo Penta, OMC, Marine Power and others. Will replace 9 tooth drive OEM versions 3.0 - 8.1L with 14" flywheel. Anodized casting, nickel plated brush holder.Replaces: BRP/ OMC 984456, 986505, 3850525, 3853982, 3854751, 3855177, 3857747, 3860566. Delco 9000735, 9000762, 9000768,9000789, 9000819, 9000821, 9000839, 9000840, 9000849, 9000885, 9000940, 9000884 (Hi Perf). Marine Power 0174-000. Mercury 50-12121A2, 50-12177A2, 50-806964A2, 50-806964A3, 50-806964A4, 50-812428A3, 50-812604A2, 50-822330A2, 50-864340A2, 50-8M8021116, 50-99418A2. Sierra 18-5905, 18-5910, 18-5913, 18-6946. Volvo 3587625, 3857747, 3860566, 3860764, 3885317, 3850525-1, 3853982-1, 3854751-9, 3855177-6, 3856004-1.
Arco 3434 Yamaha 200-225 Hp - 3434 - 57-3434F1
NEW OEM Premium Replacement Outboard Starter Fits: Yamaha 200-225HP 4-Stroke O/B Starter 13 Tooth.Replaces: Hitachi S114-860N, Yamaha 69J-81800-00, 69J-81800-01, Sierra 18-6833.
Arco 3436 Yamaha 200-300 Hp - 3436 - 57-3436F1
NEW OEM Premium Replacement Outboard Starter Fits: Yamaha 200-300HP 4-Stroke O/B Starter 13 Tooth.Replaces: Hitachi S114-8888, Yamaha 6CB-81800-01-00.
Arco 3437 Yamaha 150-300 Hp - 3437 - 57-3437F1
NEW OEM Premium Replacement Outboard Starter Fits: Yamaha 150HP, 175HP, 200HP, 225HP, 250HP, 300HP 4-Stroke O/B Starter 13 Tooth. Replaces: Hitachi S114-952C, Yamaha 6BC-81800-01-00, Sierra 18-6961.
Arco 3439 Suzuki/Omc Starter - 3439 - 57-3439F1
NEW OEM Premium Replacement Starter for Suzuki Outboard Engines.Fits: Johnson Outboard 2003 - 2006 90HP - 140HP;Suzuki Outboard 2001 - 2009 90HP, 2009 - 2014 100HP, 2001 - 2014 115HP, 2002 - 2014 140HPReplaces: SUZUKI 31100-90J01, SIERRA 18-6831, PROTORQUE PH130-0071
Arco 3448 Suzuki Starter - 3448 - 57-3448F1
OEM Premium Replacement Starter for Suzuki OutboardFits: Suzuki Outboard 70hp - 100hp, 150-350hp - 2017-2023Replaces:Suzuki 31100-98L10, 31100-98L00Sierra 18-6962Mitsubishi M000TD5872
Arco 3449 Suzuki / Johnson-Evinrude Starter - 3449 - 57-3449F1
Starter for Suzuki & Johnson-Evinrude OutboardsFits: 9.9hp-20hp, 40hp-60hp - 2005-2018Replaces: Suzuki 31100-94J22, 31100-94J21, 31100-94J20, 31100-94J10Johnson-Evinrude 5036244
Arco 3450 Yamaha Starter 25-40 Hp - 3450 - 57-3450F1
Starter for Yamaha OutboardsFits: 25hp-40hp - 2009-2022Replaces: Yamaha 6BG-81800-00-00Mitsubishi Outboard Starter M0TA5071Sierra Outboard Starter 18-6964
Arco 3451 Yamaha Starter 300-425 Hp - 3451 - 57-3451F1
Starter for Yamaha OutboardsFits: 300hp-425hp - 2007-2022Replaces: Yamaha: 6AW-81800-00-00Mitsubishi: M008T71771, M008T71772Sierra Outboard Starter 18-55507
Arco 3452 Suzuki Starter - 3452 - 57-3452F1
Starter for Suzuki and Johnson-Evinrude OutboardsFits: 70hp-90hp, 150hp-300hp - 2004-2017Replaces: Suzuki 31100-96J02, 31100-96J01,31100-96J00, 31100-93J00Johnson-Evinrude 5035078Sierra 18-6941Hitachi S114-868
Arco 3453 Honda And Tohatsu Outboard Starter - 3453 - 57-3453F1
Starter for Honda and Tohatsu OutboardsFits: 75-150hp - 2004-2014Replaces: Honda 31200-ZY6-003, 31200-ZY9-003, 31200-ZY9-H01, 31200-ZY9A-0031Tohatsu HZY631200003, HZY3-31630-003, HZY6-31200-003,HZY9-31200-H01Sierra 18-6959
Arco 3456 Yamaha Starter 200-250 Hp - 3456 - 57-3456F1
Starter for Yamaha OutboardsFits: 200-250hp - 2003-2009Replaces: Yamaha 60X-81800-01-00, 60X-81800-00-00, 60V-81800-0000 Sierra 18-6832Hitachi S114-863
Arco 5358 Omc Starter 40, 50, 75 & 90 Hp E-Tec - 5358 - 57-5358F1
Fits: Evinrude 40, 50, 75, 90 HP E-Tec Models, 9 tooth drive gear.Replaces:BRP-OMC 586768, 587045, SIERRA 18-6826
Arco 5359 Mercury Starter 9.9-15 Hp - 5359 - 57-5359F1
Fits: Mercury / Mariner 8, 9.9, 13.5, 15 HP 4 Stroke. Yamaha 15 HP, 4 Stroke, 9 tooth drive gear.Replaces: Mercury 50-852570, 50-852570T, 50-857065, 50-859168, 50-859168T, 50-893894Yamaha 66M-81800-01, 66M-81800-02Sierra 18-6943, 18-6829
Arco 5360 Mercury Starter 40-60 Hp - 5360 - 57-5360F1
Fits: Mercury/Mariner 40 HP, 50 HP, 60 HP 4-cyl, 4 Stroke, 9 tooth drive gear. Replaces: Mercury 50-859377T, 50-884044T, 50-888161T, 50-893888T, Sierra 18-6435
Arco 5361 Omc Starter 9.9-15Hp - 5361 - 57-5361F1
Fits: BRP-OMC 1993 - UP 9.9 - 15 HP, 2" Casing, Small 10 tooth drive gear.Replaces: BRP-OMC 584613, 586274, 778995, SIERRA 18-5617, 18-5710
Arco 5364 Mercury / Yamaha Starter - 5364 - 57-5364F1
Fits: Select Mercury 1998 - up 4 Stroke and Yamaha 25 HP 4 Stroke, 9 tooth drive gearReplaces: Mercury 50-830308, 50-830308T, 888151T, 50-859169T, 50-893886T, Yamaha, 65W-81800-00, 65W-81800-01, 65W-81800-02, 65W-81800-03, Sierra 18-6437
Arco 5365 Mercury 30/40/50/60 Hp Starter - 5365 - 57-5365F1
Fits: Mercury 30/40/50/60 HP 1999 - UP, 3-Cyl, 4 Stroke. Yamaha 2000 - UP 40 HP, 4 Stroke, 9 tooth drive gear.Replaces:Mercury 50-859170T, 50-859170T1, 50-884045T, 50-888160T, 50-893887TYamaha 67C-81800-00, 67C-81800-01, 67C-81800-02 Sierra 18-6438
Arco 5370 Omc Starter 55-75Hp - 5370 - 57-5370F1
3 cylinder 9-tooth drive gearReplaces: OMC 384777, 386657, 391735, 585050, 585058, 586281, 585197, 383691, Sierra 18-5626, 18-5635, 18-5648NOTE: When ordering drive assemblies for O.M.C. starters, be aware that some O.M.C. outboard starters use a 2-piece drive assembly; older O.M.C. starters use a 1-piece drive assembly.
Arco 5381 Mercury / Mariner Starter 200-225 Hp - 5381 - 57-5381F1
9-tooth drive gear.Fits: Select Mercury 2.5 DFI, 200 HP V6 DFI, 225 HP V6 DFI, 3.OL V6Replaces: Mercury 50-833153, 50-833153-1, 50-833153-2, 50-833153-3, 50-833153-4, 50-833153-5, 50-898265008, Sierra 18-6283
Arco 5381X Mercury/ Mariner 150-225 Hp Starter - 5381X - 57-5381Xf1
Fits: Mercury/Mariner, 150-225 HP, 9-tooth drive gearReplaces: MERCURY 50-856996T, 50-86976, 50-898265013, SIERRA 18-5609, 18-6825
Arco 5395 Mercury / Mariner 225 Hp Starter - 5395 - 57-5395F1
Fits: Select Mercury/Mariner, 1994-Up 225 HP, 8-tooth drive gearReplaces: Mercury 50-818445-2, 50-818455-3, 50-818445-5, 50-898265009, Sierra 18-5620
Arco 5396 Mercury / Mariner 30-60 Hp Outboard Starter - 5396 - 57-5396F1
Fits: Select Mercury 30-40 HP, 2-cyl, 55-60 HP, 45 HP Jet, 10-tooth drive gear.Replaces: Mercury 50-822462, 50-822462-1, 50-822462T1, 50-893890T, Sierra 18-5621
Arco 5415 Mercury Starter, 80-115 Hp - 5415 - 57-5415F1
OEM Premium Replacement Starter for Mercury Outboards.Fits: Mercury Marine 80HP - 115HP 4-stroke outboard engines. 2009-2010 80HP Jet Optimax engines.Replaces: MERCURY 879345T77, 8M0038387
Arco 60070 Volvo Penta Alternator - 60070 - 57-60070F1
3856600 & 3860171 12 volt - 65 ampInternal Regulator2-inch mounting footSingle groove pulley included
Arco 60072 Volvo Penta Alternator - 60072 - 57-60072F1
Fits: Late model Volvo Penta, 12 Volt, 65 Amp, Multi-groove serpentine pulley included.Replaces: VOLVO 3860082, SIERRA 18-5979
Arco 60073 Volvo Penta Alternator - 60073 - 57-60073F1
Fits: Late model Volvo Penta, 12 Volt, 75 Amp, 50-mm multi-groove. Serpentine pulley included.Replaces: VOLVO 3862665, 3884950, SIERRA 18-5882, 18-6845
Arco 6206 Omc Tilt Trim Motor - 6206 - 57-6206F1
Fits: OMC 387277, 582048, 582155Replaces: Prestolite EVC4002 3 bolt mount
Arco 6226 Volvo Penta Sx Tilt Trim Motor - 6226 - 57-6226F1
NEW OEM Premium Replacement Tilt Trim Motor with Reservoir.Fits: SX Late model with coarse thread.Replaces: VOLVO 3587079, 3855745, 3855744, 3855334, 3854030, 3860879, 3858069, 3857489,SIERRA 18-6806
Arco 6236 Honda / Suzuki Tilt Trim Motor - 6236 - 57-6236F1
Fits: Select HONDA BF75, BF90, 4-bolt mount, Round Plug-In Connector, Includes O-ring, Select SUZUKI 75 & 90hp 4 Stroke.Replaces: Honda 36120-ZY9-003, 36120-ZY9-013, Suzuki DF90TLK7, DF90TXK7, Sierra 18-6743Visit www.arcomarine.com for up to date application information.
Arco 6255 Honda / Suzuki Tilt Trim Motor - 6255 - 57-6255F1
Fits: Late model Mercury /Force 25-50 HP outboards, 2-wire connection, 4-bolt mount, Flat-blade shaft, Bullet Connector Terminal Ends.Replaces: Mercury & Force 827675A1, Sierra 18-6286
Arco 6257 Yamaha Tilt & Trim Motor - 6257 - 57-6257F1
Fits: Yamaha 2004-2015 50/60HP, 4 Stroke, 2-wire connection, 3-bolt mount, ring terminal ends, includes O-ring.Replaces: Yamaha 6C5-43880-00, 6C5-43880-01, Sierra 18-6836
Arco 6258 Yamaha Tilt & Trim Motor - 6258 - 57-6258F1
2-wire connection 4-bolt mount
Arco 6267 Yamaha Tilt & Trim Motor - 6267 - 57-6267F1
Fits: Yamaha Early 70, 90,115,150-200 HP, 3-wire connection, 3-bolt mount, Ring Terminal Ends, 4-mm thick shaft blade with 68.3-mm mounting collar. Includes O-ring.Replaces: Yamaha 6E5-43880-01, 6E5-43880-02, 6H1-43880-00, 688-43880-10, 688-43880-11, Sierra 18-6259, 18-6821
Arco 6285 Mercruiser Tilt/Trim Motor & Pump Assembly - 6285 - 57-6285F1
NEW OEM Premium Replacement Tilt Trim Motor (Complete Assembly). Fits: Late model Mercruiser w/Oildyne pump, Ring Terminal Ends. Replaces: MERCURY 865380A25, 865380A15, 865380A05, 865380A02 SERRA 18-6747.
Arco 6286 Mercruiser Replacement S.S. Bracket Assembly - 6286 - 57-6286F1
NEW OEM Premium Replacement Stainless Steel Bracket Assembly. Fits: Late model Mercruiser w/Oildyne pump, Ring Terminal Ends. Replaces: MERCURY 826548A1, 88893A4, 58397A3, 58397A2, 48419A1 SERRA 18-6750.
Arco 6293 Yamaha Tilt Trim Motor - 6293 - 57-6293F1
Fits: Yamaha 150-250hp, 2011-2021 4-StrokeReplacesYamaha 43880 Series: 63P-43880-11-00, 63P-43880-21-00,63P-43880-22-00, 63P-43880-10-00,6KW-43880-00-00,6KW-43880-01-00
Arco 6294 Yamaha Tilt Trim Motor - 6294 - 57-6294F1
Fits: Yamaha 90-130hp (fit for 4T F75 F80 F90 F100 F115 FL115 F125 F130) 2014 - 2021 4-StrokeReplaces: 6EK-43880-12-00, 6EK-43880-11-00, 6EK-43880-00-00, 6EK-43880-13-00
Arco 6295 Yamaha Tilt Trim Motor - 6295 - 57-6295F1
Fits: Yamaha 300 -350hp 2007-2019 4-StrokeReplaces 6AW-43880-02-00, 6AW-43880-01-00, 6AW-43880-00-00
Arco 6296 Yamaha Tilt Trim Motor - 6296 - 57-6296F1
Fits: Yamaha 25hp-40hp, 2000-2022Replaces: 67C-43880-10-00, 67C-43880-01-00, 67C-43880-00-00, 65W-43880-10-00
Arco 6297 Yamaha Tilt Trim Motor - 6297 - 57-6297F1
Fits: Yamaha 225hp-250hp- 1993-2003Replaces: Yamaha 61A-43880-02-00, 61A-43880-01-00, 61A-43880-00-00Sierra Tilt Trim Motor 18-6782
Arco 6800 Mercury Tilt Trim Motor - 6800 - 57-6800F1
Fits: Yamaha 225hp-250hp, 1993-2003Replaces: Mercury 8M0055006, 893518T01, 830150T10, 830150T6, 830150T4
Arco 70216 2.3 L Ford Engine Starter - 70216 - 57-70216F1
Three-bolt mount Kit includes wiring harness to replace conventional starter
Arco 7326 Mercury Starter, V6 Sport Jet - 7326 - 57-7326F1
Fits: Mercury Select 1996-up V6 Sport Jet, 8-tooth drive gear.Replaces: Mercury 50-832997, 50-832997-1, 50-832997-2, 50-832997003, Sierra 18-6282
Arco 98180 Westerbeke Oem Inboard Starter - 98180 - 57-98180F1
NEW Original Equipment Quality Replacement Inboard Starter Mitsubishi gear reduction starter Fits: Westerbeke 9 tooth drive gear,12 volt, CW Rotation. Replaces: Sierra 18-6937, Yanmar 128170-77010D, Yanmar 128170-77010-D
Arco Cs001 Mercruiser/Omc Contact Set - Cs001 - 57-Cs001F1
NEW OEM Premium Replacement Contact Set for Mercruiser Inboard Engines.Fits: GM (4 & 6 Cyl) Engines with Conventional Delco Ignition.Replaces: MERCRUISER 34235, 34235T, 35637, OMC STERN DRIVE 380538, CHRIS-CRAFT 16.69-00049, SIERRA 18-5311, CDI ELECTRONICS E66-0017
Arco Dv394 Replacement Drive Gear - Dv394 - 57-Dv394F1
Fits: Arco Starter 5394, 13-tooth drive gear.Replaces: Force 811902, Mercury 802665T, 811902, SIERRA 18-5677
Arco High Performance Starter - 30459 - 57-30459F1
Fits: Mercruiser, Crusader, Marine Power, and othersLight weight and compact permanent magnet gear reduction Light weight and compact permanent magnet gear reduction
Arco Sw450 Mercruiser, Cobra, Volvo Penta Solenoid - Sw450 - 57-Sw450F1
Fits: ARCO 30460, 30470 4 terminals12 Volt
Arco Sw941 Yamaha Solenoid - Sw941 - 57-Sw941F1
Replaces: Yamaha 6E5-81941-00, 6E5-81941-10, 6E5-81941-11, 61A-81941-00, Sierra 18-5853
Arco Tp001 Mercruiser/Volvo/Omc Throttle Position Sensor - Tp001 - 57-Tp001F1
NEW OEM Premium Replacement Throttle Position Sensor for Mercruiser, OMC, and Volvo Penta Inboard Engines.Fits: GM 5.7L, 6.2L MPI (1997-Up)Replaces: MERCRUISER 803148, OMC STERN DRIVE 3855296, VOLVO PENTA 3855296, SIERRA 18-7757, CDI ELECTRONICS E13-0008
Arco Ts001 Mercury Tilt Trim Sender - Ts001 - 57-Ts001F1
NEW OEM Premium Replacement Tilt Trim Sender.Fits: MC-I, R, MR, Alpha, Alpha Gen II, Bravo drives.Replaces: MERCURY 805320A03, 805320A1, 17693A2, 96863A15, 63115A12, 88678A4, 88678A5,SIERRA 18-7633
Arco Xxx Mercury Voltage Regulator - Vr600 - 57-Vr600F1
NEW OEM Premium Replacement Voltage Regulator for Mercury Outboard Engines. Fits: 1995-2005 (25-40HP - 2 Cyl.) 1987-2007 (45-90HP - 3 Cyl.) 1989-2006 (90-125HP- 4 Cyl.) 1992-2000 (150-225HP - 6 Cyl.) Replaces: MERCURY MARINE 815279A2,CDI ELECTRONICS 194-5279,SIERRA 18-5741,EMP 300-26072
Ars-5 Advanced Multi Stage Regulator, 12V W/Harness - Ars-5-H - 684-Ars5Hf1
The ARS-5 features the same capabilties as the MC-614 regulator, but for single alternator applications only. Easy to select and program for flooded, deep cycle flooded, gel, AGM and Optima spiral wound batteries. Ten belt load management settings control horsepower load on drive belts when used with optional temp sensors.
Ars-5 Advanced Multi Stage Regulator, 12V W/O Harness - Ars-5 - 684-Ars5F1
The ARS-5 features the same capabilties as the MC-614 regulator, but for single alternator applications only. Easy to select and program for flooded, deep cycle flooded, gel, AGM and Optima spiral wound batteries. Ten belt load management settings control horsepower load on drive belts when used with optional temp sensors.
Attwood 119014 Battery Charger - 11901-4 - 23-119014F1
Dual rated 12V and 6V battery charger can be used for all of your marine, automotive, RV, and sport applications. The charger is compact and a perfect for your bench, garage, or shop use. LED indicators let you know that your battery is fully charged. Overcharge, short circuit, and reverse polarity protection provide years of worry-free use.
Attwood 141967 All-Craft Battery Operated Led Portable Nav Light Kit W/Threaded Pole, Marine Gray - 14196-7 - 23-141967F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp, Screw-Down & Adhesive Pad mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 141977 All-Craft Battery Operated Led Portable Nav Light Kit W/Threaded Pole, Real Tree® Max-4 Camo - 14197-7 - 23-141977F1
Be seen and be safe with these compact and portable LED navigation lights. All new portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal for personal water craft, camping, and hunting. Kit includes red/green LED bow light, white LED stern light, quick-release mounts, pole, and hardware. Includes: C-Clamp, Screw-Down & Adhesive Pad mounts. Water-resistant bow and stern navigation lightsAttwood's most durable, portable LED navigation light enginesSealed electronics, built to last in harsh conditionsSealed, shock-proof composite housingShatter-proof polycarbonate lens150+ hour run-time on three AAA batteries (not included) For nighttime operation of small boats and tenders w/o 12V systems. Not intended to meet U.S.C.G. regulations. Not for use on boats that can exceed seven knots.
Attwood 142626 12V, Dual Usb Adapter/Charger - 14262-6 - 23-142626F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 142646 12V Adapter W/Dual Usb Ports & Battery Charge Display - 14264-6 - 23-142646F1
It's easy to add the convenience of using and charging electronic devices on any boat. Compatible with mobile devices and marine equipment. For 1/4" USB blade connections. Protected against reverse polarity, thermal overload, and short circuiting.
Attwood 90651 Standard Vented Battery Box For Group 24/24M, Black - 2616965 - 23-90651F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 90671 Power Guard Battery Box, Black, Fits Group 27M - 2617695 - 23-90671F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood 90707 Powerguard Pro Battery Box, Group 24/27 - 9070-7-Ir - 23-90707F1
Water Resistant Ventilation: Top facing ventilation minimizes water in-take through engineered spill channels, directing rain/ splash away from batteries Polypropylene Composite: Polypropylene composite provides vital durability needed to support heavy lead battery cells, while resisting any run-off and UV discolorationFolding Terminal Entry Panels: Easily run terminal connected wires through folding terminal access panels, without the need to remove mounting strapSnap-Lock Lid Design: Locking lid provides peace of mind that lid will remain secure even under the most extreme conditionsFree-Play Reduction Blocks: Free-Play Reduction Blocks help ensure that 24 series battery cells are kept secure within the box, reducing damage to box and battery alikeReinforced Mounting Hardware: Mounting hardware consists of durable steel mounting feet and reinforced buckled strap to ensure box doesn't shift under heavy wave conditionsBi-Directional Design: Terminal Access Panels are positioned on either side of the box, allowing for maximum battery accessErgonomically Designed Handles: Ergonomic handles allow for easy transportation on and off vessels, trailers, and more
Attwood 90821 Standard Battery Box, Black, Vented - Fits Group 16 - 2623174 - 23-90821F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.For smaller batteries like Series 16 and those used in Jet skis and lawn equipment.
Attwood 90841 Large Battery Box, Black, Vented - Fits Group 29/31 - 2623904 - 23-90841F1
Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black.
Attwood All Plastic Heavy Duty Battery Tray - 2628773 - 23-90975F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood All Plastic Heavy Duty Battery Tray - 2629138 - 23-90985F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood Battery Selector Switch 4 Way - 14230-3 - 23-142303F1
Single-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two batteries in parallel, or both off. Rated for 300-amps continuous at 6 VDC, 150-amps continuous at 12 VDC. For 6-Volt to 32-Volt D.C. systems. Includes alternator field circuit disconnect to allows switching while the engine is running. Selector has positive click positions. Bakelite housing with brass terminals and brass nuts. Install with #10 screws. 1, 2, Both, Off.
Attwood Battery Strap Kit 38" Fits 90651 And 90671 - 2598031 - 23-90133F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Strap Kit 54" Fits 9084 - 9013A3 - 23-9013A3F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Switch 12 To 50V Dc On/Off - 14233-7 - 23-142337F1
Compact, heavy-duty battery switch with removable control knob to deter theft. 200 Amps Continuous / 300 Amps Intermittent / on-off-separateErgonomic gripsRemovable walls for easy
Attwood Heavy Duty Battery Tray For Group 24/24 - 2628408 - 23-90965F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 27 - 2628042 - 23-90955F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Heavy Duty Battery Tray For Group 29/31 - 2627677 - 23-90945F1
Made of heavy-duty non-corrosive black plastic. Includes adjustable height crossbar and stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Install with #10 fasteners.
Attwood Standard Non-Vented Battery Box For Group 24/24M, Black - 2618426 - 23-90691F1
Non-vented. All battery boxes meet ABYC standard E-10 and U.S.C.G. Specification Number 183.420 as an OEM-installed battery hold-down system. Polypropylene construction for total acid resistance. Hold-down straps resist 350 pounds of force, nearly four times the U.S.C.G. requirement. Battery boxes are drop tested in temperatures ranging from -20°F to +120°F. Mounting hardware is included.
Balmar Brs-2T Single Stage Voltage Regulator - Brs-2T-12 - 684-Brs2T12F1
For vessels with nominal battery loads and/or applications where charging times are too short to benefit from the intelligence of multi-stage regulators, a single-stage regulator may be satisfactory. Adjustable target voltage to address battery types. Adjustable from 13.5V - 14.5V.
Balmar Mc618 Max Charge Mc618 Voltage Regulator, 12V - Mc-618 - 684-Mc618F1
Upgraded from the MC-614 Voltage Regulator. The MC-618 communicates with the SG200 Battery Monitor. The MC-618 Battery Monitor is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth® Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth® Smartphone App.
Balmar Mc618Hc Max Charge Mc618 Voltage Regulator W/ Harness, 12V - Mc-618-Hc - 684-Mc618Hcf1
Upgraded from the MC-614 Voltage Regulator. The MC-618 communicates with the SG200 Battery Monitor. The MC-618 Battery Monitor is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth® Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth® Smartphone App.
Balmar Mc618Vl01 Max Charge Mc618 Voltage Regulator W/ Temp Sensor, 12V - Mc-618-Vl-01 - 684-Mc618Vl01F1
Upgraded from the MC-614 Voltage Regulator. The MC-618 communicates with the SG200 Battery Monitor. The MC-618 Battery Monitor is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth® Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth® Smartphone App.MC618VL01: Includes Temp Sensors and Internal Smart Ready 12V Regulator for Valeo Alternators.
Balmar Mctsb30 Battery Temp Sensor 30' - Mc-Ts-B30 - 684-Mctsb30F1
Battery Temp Sensor 30' for Max Charge & ARS-5 regulators.
Balmar Sg200 Battery Monitor - Sg200 - 684-Sg200F1
The SG200 is quite simply the most accurate battery monitor available today. Balmar has combined the best features of its 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Device architecture which facilitates multiple Displays or multiple SmartShunts to be added to the network-allowing the boater to monitor multiple energy storage banks simultaneously from multiple locations. Learns & Displays All Critical Battery Parameters: State of Charge (SoC%), State of Health (SoH%), Charge/Discharge Current Flow, Time Remaining, History, Faults & Alerts Support for All Common Battery Chemistries & Voltages: Lead Acid, Lithium (LiFePO4), Standard , 12V-48V Battery Banks, Typically 97% Accurate for SoC% within 2 Cycles, Auto-Calibrating, Does not Lose Accuracy with Age Large, Bright Color Display: Sunlight Readable, Configurable & Dimmable, 60 Degree Viewing Angle, Fits in Standard 2 1/16" Gauge Socket Expandable Architecture: Multiple Displays (Optional), Multiple Battery Banks (Optional), Standard Support for 2 Start Batteries (Voltage Only), Simple, easy-to-install Point-to-Point Network Optional Smartphone/Bluetooth® Gateway: Coming Soon, Free iOS and Android Apps (Requires Bluetooth® Gateway PN SG2-0300), View All Parameters on your Phone, Download Product Updates
Balmar Sg20130 Sg200 Battery Monitor Optional Second Deep Cycle Bank/Upgrading To N2K Capabilities - Sg2-0130 - 684-Sg20130F1
Optional SmartShunt for Monitoring a Second Deep Cycle Bank or Upgrading an Existing SG200 to N2K Capabilities; Comes with the M12 (DeviceNet) 12" N2K Cable Adapter (SG2-0405)
Balmar Sg205 Battery Monitor Kit, 12-48V - Sg205 - 684-Sg205F1
Battery monitor combines the best features of the 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Facilitates multiple Displays or multiple SmartShunts to the network-allowing the boater to monitor multiple energy banks simultaneously from multiple locations. The SG205 is for users who want to monitor their batteries exclusively from their smart phone including the SmartShunt and Bluetooth Gateway®. The SG205 has the same features as the SG200 without the 2" color display.
Balmar Sg210 Battery Monitor Kit - Sg210 - 684-Sg210F1
State of Charge (SoC%) 97% accurate display of your battery's State of Charge after learning batteries State of Health (SoH%) Proprietary self-calibrating algorithm determines how your battery has aged from its original capacityCharge/Discharge Amps Displays the real-time current flowing in or out of your house batteryTime Remaining until empty when discharging, or time remaining until full when chargingIncludes Color Display, SmartShunt, Smartlink Com Cable, Bluetooth® Gateway
Balmar Sg235 Sg235 Battery Monitor Kit, Sg2-0300 - Sg235 - 684-Sg235F1
Includes NMEA 2000 SmartShunt, NMEA 2000 M12 (DeviceNet) Adapter Cable and Bluetooth Gateway (No Color Display)
Batt Charger1Kwh Us110 Avator - 8M6012091 - 710-8M6012091F1
Batt Charger1Kwh Us230 Avator - 8M6012092 - 710-8M6012092F1
Battery Agm 1450Ca/1300Cca 214Aa 12V - Odsagm470Ft - 819-Odsagm470Ftf1
Battery Agm Gr8D1800Ca/1450Cca Marine Parts - Odpagm8Dt - 819-Odpagm8Dtf1
Battery Box 4D - 902138 - 100-902138F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
Battery Box 8D Double High - 912339 - 100-912339F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
Battery Box Strap - 38" - 415092-1 - 354-4150921F1
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.
Battery Box Strap - 54" - 415094-1 - 354-4150941F1
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.
Battery Charger Output Extension Cable - 1820089 - 27-1820089F1
WAGO Wall-Nut Quick Connectors (UL listed)Fused Positive & Negative Leads
Battery Clip - 13651 - 50-13651F1
For use with all battery operated electrical devices. Copper plated. 1" jaw opening. 3" long.
Battery Clips, Pr. - 14258-6 - 23-142586F1
All copper construction with red and black handle grips. 3" x 1-1/8". For use with wire up to 10-gauge.
Battery Disc W/Break 30A W/ Breaker 30A - 830400-1 - 354-8304001F1
Battery Disc W/Break 70A W/ Breaker 70A - 830404-1 - 354-8304041F1
Battery Distribution Cluster Single Engine Square Replaces P/N 69-716Sq140Advsr - 716-Sq-140A-Dvsr - 969-716Sq140Advsrf1
Battery Doctor 23143 Trickle Charger, 5 Watts - 23143 - 240-23143F1
Battery Doctor® Solar Solutions offer a variety of choices in Amorphous Solar Panels. Our Amorphous panels and kits work in all daylight conditions helping you to harness the Suns Energy! Waterproof, shock and rust resistant, Battery Doctor® has your Go Green Technology covered! Durable Plastic FrameMale output adapter (cigarette lighter adapter)Alligator clipsMounting Hardware
Battery Doctor 23144 Solar Charger, 9 Watts - 23144 - 240-23144F1
Battery Doctor® Solar Solutions offer a variety of choices in Amorphous Solar Panels. Our Amorphous panels and kits work in all daylight conditions helping you to harness the Suns Energy! Waterproof, shock and rust resistant, Battery Doctor® has your Go Green Technology covered! Durable Plastic FrameMale output adapter (cigarette lighter adapter)Alligator clipsMounting Hardware
Battery Doctor 4-Way Trailer End, 12" Male - 80902 - 240-80902F1
Wishbone Harness
Battery Doctor 4-Way Trailer End, 24" Male - 80903 - 240-80903F1
Wishbone Harness
Battery Doctor 4-Way Trailer End, 36" Male - 80904 - 240-80904F1
Wishbone Harness
Battery Doctor 4-Way Trailer End, 48" Male - 80905 - 240-80905F1
Wishbone Harness
Battery Doctor 42 Piece Atm/Mini Fuse Kit - 30915 - 240-30915F1
Includes: 7 each - 5 Amp, 10 Amp, 15 Amp, 20 Amp, 25 Amp, and 30 Amp Fuses1 each - Puller/Tester
Battery Doctor 42 Piece Ato/Atc Fuse Kit - 30914 - 240-30914F1
Includes: 7 each - 5 Amp, 10 Amp, 15 Amp, 20 Amp, 25 Amp, and 30 Amp Fuses1 each - Puller/Tester
Battery Doctor Agc Glass Fuse, 10A, 5/Pk - 24610 - 240-24610F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 15A, 5/Pk - 24615 - 240-24615F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 2.5A, 5/Pk - 24602 - 240-24602F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 25A, 5/Pk - 24625 - 240-24625F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
Battery Doctor Agc Glass Fuse, 30A, 5/Pk - 24630 - 240-24630F1
AGC glass fuses are the classic style of fuse for circuit protection. Commonly found in older model cars, AGC fuses are great for restoration and older automotive applications. AGC glass fuses are available in a wide variety of amp ratings to meet the circuit protect demands of an electrical application. Used in most domestic and imported cars.
