Select Category
Electrical
Sea-Dog 4266241 Terminal Block, 4 Gang - 426624-1 - 354-4266241F1
Terminal blocks are modular, insulated screw-type electrical connectors that are used to secure and/or terminate two or more wires together. Useful for connecting wiring to a ground or for connecting electrical switches and outlets to the mains. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate preventing loosening and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with four RH fasteners (not included).
Sea-Dog 426503 Double Usb Power Socket W/O Light - 426503 - 354-426503F1
This Double USB Power Socket has no LED indicator light so it will not drain the battery when not in use. Capable of charging two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon with terminal spade contacts. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires.
Sea-Dog 4261641 Polarized Molded Electrical Connector, 4-Pin - 426164-1 - 354-4261641F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 4261631 Polarized Molded Electrical Connector, 3-Pin - 426163-1 - 354-4261631F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 4261621 Polarized Molded Electrical Connector, 2-Pin - 426162-1 - 354-4261621F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 425020 Wave Led Battery Test Rocker Switch Panel - 425020-1 - 354-4250201F1
The Wave LED Battery Test Rocker Switch Panel includes an illuminating rocker SPDT switch and bright LED display to monitor voltage of two batteries.
Sea-Dog 4248001 6-Gang Vertical Rocker Switch Breaker Panel - 424800-1 - 354-4248001F1
Fire resistant injection molded nylon w/6 illuminating switches. The Vertical 6-Gang Breaker Rocker Switch Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Additional sizes available. Individual circuit 10A max. 37A total. These fire resistant panels are suitable for use in engine room compartments. Includes a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). CE compliant. 12 VDC.
Sea-Dog 4242101 Horizontal 6-Gang Rocker Switch Panel - 424210-1 - 354-4242101F1
Aluminum Horizontal Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
Sea-Dog 4241101 6-Gang Vertical Rocker Switch Fuse Panel - 424110-1 - 354-4241101F1
Vertical 6-Gang Rocker Switch Panel is constructed of fire resistant injection molded nylon. These panels are suitable for use in engine room compartments. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six fuse holders for use with standard AGC 1/4" x 1-1/4" glass style fuses. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included). Meets CE specifications.
Sea-Dog 4240101 4-Gang Vertical Rocker Switch Fuse Panel - 424010-1 - 354-4240101F1
Vertical 4-Gang Rocker Switch Panel is constructed of fire resistant injection molded nylon. These panels are suitable for use in engine room compartments. Features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4" x 1-1/4" glass style fuses. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with four #6 RH fasteners (not included). Meets CE specifications.
Sea-Dog 4230461 Splash Guard Bilge Pump Panel With Circuit Breaker - 423046-1 - 354-4230461F1
Injection molded ABS for maximum durability and corrosion resistance. Additional splash guard makes this ideal for applications where the panel front might be subjected to light spray and water. Features a three-way switch allowing both automatic and manual switching of the bilge pump. When operated in the Manual mode, a red LED light is activated, when in the Automatic mode, a green LED light is activated. A convenient back lit feature allows the words Bilge Pump" to illuminate facilitating easy location and operation. Bilge pump switch panel includes a UL listed 20 amp circuit breaker allowing quick and easy resetting of the system.
Sea-Dog 4230331 Bilge Pump Water Alarm Panel - 423033-1 - 354-4230331F1
The Bilge Water Alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump float switch level. Bilge pump should be hooked up to a switch. Rated 15 Amps. Cutout: 1-3/4" x 2-1/2".
Sea-Dog 4227901 Smart Dual Battery Isolator, 12V - 422790-1 - 354-4227901F1
This Smart Dual Battery Isolator is ideal for dual battery applications. Allows two batteries to automatically charge at the same time and then isolates the batteries, ensuring the starting battery is always charged and ready for use. Automatically engages or disengages the circuit at pre-set voltages by sensing the input voltage generated, eliminating the possibility of discharging the primary starting battery. Cut-in voltage: 13.3V. Cut-out voltage: 12.8V. Surge protected. Features an LED indicator to alert the user when the unit is engaged. Constructed of machined brass with a weatherproof injection molded nylon housing and durable silver tipped contacts. Installs with two #8 RH fasteners (included). IP65 rating.
Sea-Dog 4227681 Heavy Duty Off/1/Both/2 Battery Switch - 422768-1 - 354-4227681F1
This Heavy Duty Battery selector switch has 380A continuous and 2000A cranking amps, giving it the power to start a large single or dual diesel engines. Can be surface or rear panel mounted. Ignition protected. Safe for installation on gasoline powered boats. Constructed of injection molded nylon with machined brass contacts. Installs with four #10 RH fasteners (not included).
Sea-Dog 4227661 Heavy Duty Off/On Battery Switch - 422766-1 - 354-4227661F1
This Heavy Duty Battery selector switch has 380A continuous and 2000A cranking amps, giving it the power to start a large single or dual diesel engines. Can be surface or rear panel mounted. Ignition protected. Safe for installation on gasoline powered boats. Constructed of injection molded nylon with machined brass contacts. Installs with four #10 RH fasteners (not included).
Sea-Dog 4227321 Mini Battery Switch W/Removable Knob - 422732-1 - 354-4227321F1
These Mini Battery Switches feature a removable knob for extra security. To remove, simply twist the cap to the out position and pull. Mini footprint makes it ideal for close quarters. Rated at 100A continuous and 150A cranking amps. Constructed of machined brass and injection molded nylon.
Sea-Dog 4216181 Led Round Temperature Meter - 421618-1 - 354-4216181F1
Temperature Meter includes a prewired temperature sensor with a 6' cable. Monitors temperature on a bright LED screen. Reverse polarity protected. Same compact round size as a standard 12 VDC receptacle, this Temperature Meter supports many installation options. Constructed of injection molded nylon. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. 12-24 VDC. IP67 waterproof rating.
Sea-Dog 415211 Battery Terminal, Negative - 415211-1 - 354-4152111F1
Wing nut style battery terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead.
Sea-Dog 4152101 Battery Terminals, Positive & Negative Set - 415210-1 - 354-4152101F1
Wing nut style battery terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead.
Sea-Dog 415057 Battery Tray, Group 27 - 415057-1 - 354-4150571F1
Injection Molded Polypropylene.
Sea-Dog 415054 Battery Tray, Group 24 - 415054-1 - 354-4150541F1
Injection Molded Polypropylene.
Sea-Dog 4150471 Battery Tray With Strap, Group 24 - 415047-1 - 354-4150471F1
Injection Molded Polypropylene.
Sea-Dog 415044 Battery Tray With Strap, Group 24 - 415044-1 - 354-4150441F1
Injection Molded Polypropylene.
Sea-Dog 4053643 Led Undermount Light Bar, 10" - 405364-3 - 354-4053643F1
LED Undermount Light Bar has 45° tilt. Osram LEDs provides for 3,200 lumens @ 40W. Constructed of powder coated die cast aluminum with a durable polycarbonate lens. IP67 rating. CE, RoHS compliant.
Sea-Dog 4053603 Led Undermount Light Bar, 5" - 405360-3 - 354-4053603F1
LED Undermount Light Bar has 45° tilt. Osram LEDs provides for 1,200 lumens @ 15W. Constructed of powder coated die cast aluminum with a durable polycarbonate lens. IP67 rating. CE, RoHS compliant.
Sea-Dog 4053213 Led Cockpit Spreader Light, 12/24V, White - 405321-3 - 354-4053213F1
These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Low amp draw, 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.
Sea-Dog 4053203 Led Cockpit Spreader Light, 12/24V, Black - 405320-3 - 354-4053203F1
These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Low amp draw, 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.
Sea-Dog 4053003 Led Rechargeable Handheld Flood Light, 12/120V - 405300-3 - 354-4053003F1
The flood light is fully adjustable, the handle allows the light to be hung or propped at many different angles to illuminate the task at hand. Includes both a 12 VDC and 120 VAC charge adapter. Constructed of a black powder coated aluminum housing with a stamped 304 stainless steel bracket and polycarbonate lens. Run time 3-4 hours.
Sea-Dog 4049393 Led Flex-Neck Day/Night Light With Usb - 404939-3 - 354-4049393F1
LED Flex-Neck Day/Night Light with USB is great for chart lighting or can be used as a reading, cabin, or berth light. Features 21 white LEDs and 3 red LEDs for night vision with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between red, white, and off. Continue to touch button to activate dimmer. 3000K Bridgelux bulbs @ 3W. USB Port: 5V/2A. Constructed of rubber coated plastic. Installs with two #6 FH fasteners (included). CE, RoHS certified.
Sea-Dog 4043323 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Frosted Lens - 404332-3 - 354-4043323F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Stylish stainless steel finish to compliment any interior. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 404330 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Clear Lens - 404330-3 - 354-4043303F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 404232 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Frosted Lens - 404232-3 - 354-4042323F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 4042303 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Clear Lens - 404230-3 - 354-4042303F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Stylish stainless steel finish to compliment any interior. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 4030651 Led Push Button On/Off Switch - 403065-1 - 354-4030651F1
LED Push Button On/Off Switch is prewired for easy installation. Typically wired so LED ring lights up blue when pushing the center button, energizing the circuit. Push button constructed of aluminum with clear water resistant nylon boot. IP66 rating.
Sea-Dog 4030641 Led Push Button On/Off Switch - High Amp - 403064-1 - 354-4030641F1
This High Amp LED Push Button On/Off Switch lights up blue when pushing the center button, energizing the circuit. Installs easily. Wired with three spade terminals. Constructed of corrosion resistant formed 304 stainless steel. IP67 rating.
Sea-Dog 4030631 Led Push Button On/Off Switch - 403063-1 - 354-4030631F1
LED Push Button On/Off Switch is constructed of formed 304 stainless steel. Prewired for ease of installation. Typically wired so LED ring lights up blue when circuit is energized by pushing the center button. IP65 rating.
Sea-Dog 4030611 12/24V Led Continuous Adjustment Memory Function Dimmer Switch W/O On-Off Function - 403061-1 - 354-4030611F1
This LED Continuous Adjustment Dimmer Without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When powered, the LED ring is dark blue; when adjusting towards maximum brightness, the ring becomes lighter blue; when adjusting towards minimum brightness, the ring becomes darker blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating.
Sea-Dog 4018403 Led Square Mirror Light With Dimmer - 401840-3 - 354-4018403F1
This LED Square Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. 3000K warm white, 24 Osram LEDs, 1000 lumens @ 6W. Includes #6 FH fasteners and white hole plugs. CE, RoHS compliant. 5/16" deep.
Sea-Dog 4001981 Led Dome Light, 5-1/2", Brass, 12V - 400198-1 - 354-4001981F1
Stamped polished brass, lacquer coated to prevent tarnish. With the low current consumption of .068 amps at 12 volts they give off very little heat and have extremely long service life. Vibration resistant, these LED dome lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included). Prewired with integral side mounted on/off toggle switch.
Sea-Dog 400170 Side Mount Lights, Stainless, 1 Pr. - 400170-1 - 354-4001701F1
Stamped 304 Stainless Steel. One pair includes Port and Starboard lights. Not for new construction, for replacement of existing lighting.
Sea-Dog 400140 All Around Light - 400140-1 - 354-4001401F1
Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001361 Transom Light - Rectangular - 400136-1 - 354-4001361F1
This Rectangular Transom Light is for replacement of existing lighting (not for new construction). Constructed of corrosion resistant stamped 304 stainless steel. Installs with two #10 FH fasteners (not included). These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997.
Sea-Dog 400135 Transom Light - Round - 400135-1 - 354-4001351F1
Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001101 Fold Down All Around Light, 26" - 400110-1 - 354-4001101F1
Injection Molded Nylon/Aluminum with a white translucent lens. Folds down easily for storage.
Sea-Dog 4000801 Led Flush Mount Side Lights, Stainless, 1 Pr. - 400080-1 - 354-4000801F1
One pair includes Port and Starboard lights. Direct replacement for the 400180. LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile).
Sea-Dog 4000731 Led Side Mount Lights, Black, 1 Pr. - 400073-1 - 354-4000731F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000711 Led Side Mount Lights, White, 1 Pr. - 400071-1 - 354-4000711F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000701 Led Side Mount Lights, , A:3-7/8", B:2-1/4", C:1-7/8", 12V, Stainless - 400070-1 - 354-4000701F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 400015 Led Removable All Around Light, 18" - 400015-1 - 354-4000151F1
Approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Low amp draw. Requires three #8 FH fasteners (not included).
Sea-Dog 4000101 Led Fixed Mount All Around Light, 4" - 400010-1 - 354-4000101F1
LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000051 Combination Bow Light, 12V - 400005-1 - 354-4000051F1
Injection molded polycarbonate/stamped stainless steel. Note: Not for new construction, for replacement of existing lighting.
Sea-Dog 3299701 Cap & Chain For Uhf Coax Connector - 329970-1 - 354-3299701F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299551 Right Angle Uhf Coax Connector - 329955-1 - 354-3299551F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299511 Double Female Bulkhead Uhf Coax Connector - 329951-1 - 354-3299511F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299501 Pl-258 Double Female In-Line Uhf Coax Connector - 329950-1 - 354-3299501F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299021 Pl-259/Ug176U Male Uhf Coax Connector - 329902-1 - 354-3299021F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299011 Pl-259/Ug175U Male Uhf Coax Connector - 329901-1 - 354-3299011F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299001 Pl-259 Male Uhf Coax Connector - 329900-1 - 354-3299001F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 321492 Gas Filled Lift Spring - 321492-1 - 354-3214921F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321488 Gas Filled Lift Spring - 321488-1 - 354-3214881F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214861 Gas Filled Lift Spring - 321486-1 - 354-3214861F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214841 Gas Filled Lift Spring - 321484-1 - 354-3214841F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214831 Gas Filled Lift Spring - 321483-1 - 354-3214831F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321482 Gas Filled Lift Spring - 321482-1 - 354-3214821F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321476 Gas Filled Lift Spring - 321476-1 - 354-3214761F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214741 Gas Filled Lift Spring - 321474-1 - 354-3214741F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214731 Gas Filled Lift Spring - 321473-1 - 354-3214731F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214661 Gas Filled Lift Spring - 321466-1 - 354-3214661F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214631 Gas Filled Lift Spring - 321463-1 - 354-3214631F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214621 Gas Filled Lift Spring - 321462-1 - 354-3214621F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321424 Gas Filled Lift Spring - 321424-1 - 354-3214241F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321422 Gas Filled Lift Spring - 321422-1 - 354-3214221F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3-Position Two Circuit Switch - 420400-1 - 354-4204001F1
Stamped brass. When pushed in all the way, the switch is turned off. When pulled to the first stop, the first circuit is activated. At the second stop the first circuit is deactivated and the second circuit is activated. 15 amps. 3/8" x 1" Shaft.
Sea-Dog 2733001 Tube Connector, 7/8" Black Pr. - 273300-1 - 354-2733001F1
Tube connectors are used for connecting the ends of stainless steel or aluminum tubing. Constructed of injection molded nylon they slide inside the tube. *Stainless tube wall thickness .049".
Sea-Dog 2019641 Soft Close Concealed Stainless Steel Cabinet Hinge - 201964-1 - 354-2019641F1
This Soft Close Concealed Hinge is designed to keep the hinge out of sight when the door is closed. Silent and smooth closure. Constructed of corrosion resistant stamped 304 stainless steel. Installs with four #8 FH fasteners (not included).
Sea-Dog 2019541 Flush Mount Concealed Hinge, Stainless, 2/Pk - 201954-1 - 354-2019541F1
Flush mount concealed hinges are constructed of corrosion resistant 304 stainless steel. Designed to keep the hinge out of sight when the door is closed. Installs with five #6 FH fasteners (not included).
Sea-Dog 2019161 Semi-Concealed Stainless Hinges, Pr. - 201916-1 - 354-2019161F1
Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. All hinges require #6 RH screws.
Sea-Dog 2019141 Semi-Concealed Stainless Hinges, Pr. - 201914-1 - 354-2019141F1
Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. All hinges require #6 RH screws.
Sea-Dog 171216 Stainless Steel Light Thimble, 5/8" - 171216 - 354-171216F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171212 Stainless Steel Light Thimble, 1/2" - 171212 - 354-171212F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171210 Stainless Steel Light Thimble, 3/8" - 171210 - 354-171210F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171208 Stainless Steel Light Thimble, 5/16" - 171208 - 354-171208F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171206 Stainless Steel Light Thimble, 1/4" - 171206 - 354-171206F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 159510 Stainless Wire Rope Clip, 10 Mm Wire Size - 159510-1 - 354-1595101F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595081 Stainless Wire Rope Clip, 8 Mm Wire Size - 159508-1 - 354-1595081F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595061 Stainless Wire Rope Clip, 6 Mm Wire Size - 159506-1 - 354-1595061F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595051 Stainless Wire Rope Clip, 5 Mm Wire Size - 159505-1 - 354-1595051F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595041 Stainless Wire Rope Clip, 4 Mm Wire Size - 159504-1 - 354-1595041F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595021 Stainless Wire Rope Clip, 2 Mm Wire Size - 159502-1 - 354-1595021F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1591061 Wire Rope Clamp, 1/4" - 159106-1 - 354-1591061F1
Zinc plated cast steel.
Sea-Dog 1591051 Wire Rope Clamp, 3/16" - 159105-1 - 354-1591051F1
Zinc plated cast steel.
Sea-Dog 1591031 Wire Rope Clamp, 1/8" - 159103-1 - 354-1591031F1
Zinc plated cast steel.
Sea Hawk 1284Qtkit Tuff Stuff 1/2 Gallon Kit, Light Gray - 1284Qtkit - 95-1284Qtkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Hawk 1284Glkit Tuff Stuff 2 Gallon Kit, Light Gray - 1284Glkit - 95-1284Glkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Dog 4429441 Led G4 Bulb - 442944-1 - 354-4429441F1
G4 Lamps feature 14 low amp draw LEDs that produce 60 lumens. A direct drop-in replacement for halogen bulbs with a 2-Pin GU4 base. Direct 120° illumination with no wasted light. 12VDC. LED G4 bulb is designed for interior use only.
Scotty Led Sea-Light, 41" High W/Fold Down Pole - 838 - 736-838F1
W/Fold Down Pole: The corrosion proof construction of this system provides a long service life in both fresh and salt water applications as it is designed with stainless steel fasteners and a 1/2" stainless fold down pole. 41" Tall. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours
Scotty Led Sea-Light W/Suction Cup - 835 - 736-835Sf1
W/Suction Cup: A non-permanent safety addition that is perfectly portable for kayaks and small watercraft. Designed to meet the demands of the sea but also ideal for within a vehicle, for camping and whenever a reliable high efficient light is needed. Includes versatile suction cup mount for use in both salt and fresh water. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours
Scotty Led Sea-Light W/Suction Cup - 835 - 736-835F1
W/Suction Cup: A non-permanent safety addition that is perfectly portable for kayaks and small watercraft. Designed to meet the demands of the sea but also ideal for within a vehicle, for camping and whenever a reliable high efficient light is needed. Includes versatile suction cup mount for use in both salt and fresh water. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours
Scotty 2404 Heavy Duty Connector Sleeves, 12Ea 10 Packs/Case - 2404 - 736-2404Sf1
10 Heavy Duty Brass Connector Sleeves For use with the Scotty High Performance 180 lb. test cable
