Select Category
Electrical
Tie Down Engineering Dock Hardware - Female T Connector 5"L X 5"H - 26407 - 241-26407F1
Commercial grade w/ 1/2" tabs. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
Tie Down Engineering 86566 Tail Light Bracket - 86566 - 241-86566F1
Galvanized steel for long lasting durability.
Tie Down Engineering 44705 Tail Light Bracket - 44705 - 241-44705F1
Galvanized steel for long lasting durability.
Thruhull Connector 1-1/8 Bronze - 035006Adpp - 9-035006Adppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 31 - Nbh-31P-Dp - 232-Nbh31Pdpf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 27 - Nbh-27P-Dp - 232-Nbh27Pdpf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 24, 20/Pack - Nbh-24P-20B - 232-Nbh24P20Bf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 24 - Nbh-24P-Dp - 232-Nbh24Pdpf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Marine Track For Led Flat Rope Light Strip W/Mounting Tape - Led-Smslc50-4Wt-Dp - 232-Ledsmslc504Wtdpf1
Track w/mounting tape.
Th Marine Pontoon Under Deck Led Light Kit, Rgb, 25' - Led-Pbdk25Rgb-Dp - 232-Ledpbdk25Rgbdpf1
Includes: IP68 RGB Controller with Remote Control, Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Pontoon Under Deck Led Light Kit, Rgb, 20' - Led-Pbdk20Rgb-Dp - 232-Ledpbdk20Rgbdpf1
Includes: IP68 RGB Controller with Remote Control, Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Pontoon Under Deck Led Light Kit, Blue, 25' - Led-Pbdk25B-Dp - 232-Ledpbdk25Bdpf1
Includes: Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Pontoon Under Deck Led Light Kit, Blue, 20' - Led-Pbdk20B-Dp - 232-Ledpbdk20Bdpf1
Includes: Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Ledrgbcont4Rdp Rgb Led Light Controller, Round W/Chrome Bezel - Led-Rgbcont-4R-Dp - 232-Ledrgbcont4Rdpf1
Touch screen technology Illuminated power buttonControls RGBW light color and intensityWater resistant
Th Marine Ledrgbcont3Fdp Rgb Led Light Controller, Square - Ledrgbcont3Fdp - 232-Ledrgbcont3Fdpf1
Touch screen technology Illuminated power buttonControls RGBW light color and intensityWater resistant
Th Marine Led72000Dp Oval Courtesy Light, White W/Blue Leds - Led-72000-Dp - 232-Led72000Dpf1
Narrow Beam Pattern Narrow Beam Pattern12V DC / 0.2W power consumptionWeatherproof design- IP65
Th Marine Led71000Dp Oval Courtesy Light, White W/White Leds - Led-71000-Dp - 232-Led71000Dpf1
Narrow Beam Pattern 12V DC / 0.2W power consumptionWeatherproof design- IP65
Th Marine Led5200Dp Led Flex Strip Bow Light Set, Red & Green - Led52000Dp - 232-Led52000Dpf1
Super Bright Ideal for Kayaks and Small Boats for VisibilityNot Tested for USCG Certification
Th Marine Led32487Dp Mini Underwater Led Light, Green - Led-32487-Dp - 232-Led32487Dpf1
Glass lens Auto-sensing, no controller requiredIP68 Rated
Th Marine Led32485Dp Mini Underwater Led Light, Blue - Led-32485-Dp - 232-Led32485Dpf1
Glass lens Auto-sensing, no controller requiredIP68 Rated
Th Marine Led32484Dp Mini Underwater Led Light, Rgbw - Led-32484-Dp - 232-Led32484Dpf1
Glass lens Auto-sensing, no controller requiredIP68 Rated2-wire RGB can be wired directly to toggle switch. Full spectrum of colors scroll automatically at start. Simple off/on again pauses on selected color.
Th Marine Led Rgb Color Changing Flat Rope Light, 20' - Led-Sm20-Rgb-Dp - 232-Ledsm20Rgbdpf1
Create awesome colors and light shows on your boat or trailer with our RGB Color Changing Flat Rope LED Light strips. Unlike other RGB systems, this is marine grade, IP68 waterproof, and fully submersible. Requires an RGB controller for operation. Dazzling Light Show Effects with RGB Color Changing Lights with Many Controller FeaturesIP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillHigh Output, Super Bright, Super Flexible
Th Marine Led Cup Holder Accent Ring, Blue - Led-Smchr-B-Dp - 232-Ledsmchrbdpf1
Converts any cup holder to an LED accent Simple installation - lift cup holder and slide in ringFits cup holders from 3-1/4" - 3-1/2" diaRing contains 18 attractive LEDs
Terminal Kit For Downriggers - 1153 - 736-1153F1
Contains: 1 Coastlock snap with swivel (#1150), 1 stainless steel thimble and 3 sleeves, 1 soft stop bumper.
Terminal Feed Thru 5/16 Sm Red - 2202-Bss - 661-2202F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 5/16 Sm Black - 2201-Bss - 661-2201F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 3/8 Sm Red - 2204-Bss - 661-2204F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 3/8 Sm Black - 2203-Bss - 661-2203F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Eye Pin Kit - 301456 - 1-301456F1
Contains terminal eye pin, E-ring, nut and washer.
Terminal Block Ind 8 Cir 30 A - 2508-Bss - 661-2508F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 8 Cir 20 A - 2408-Bss - 661-2408F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 6 Cir 30 A - 2506-Bss - 661-2506F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 6 Cir 20 A - 2406-Bss - 661-2406F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 4 Cir 30A - 2504-Bss - 661-2504F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 2 Cir 30 A - 2502-Bss - 661-2502F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 12 Cir 30A - 2512-Bss - 661-2512F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 10 Cir 30 - 2510-Bss - 661-2510F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 10 Cir 20A - 2410-Bss - 661-2410F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Bus Bar 4 Gang - 46206-04-Bx - 12-4620604Bxf1
Terminal Block 8-Gang - Fs40690 - 11-Fs40690F1
Combines negative and positive buses in one block.
Terminal Block - 2404-Bss - 661-2404F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Tent Mount Socket Panel Trp Triple Hole - 426029-1 - 354-4260291F1
Tent Mount Socket Panel Sgl Single Hole - 426027-1 - 354-4260271F1
Tent Mount Socket Panel Dbl Double Hole - 426028-1 - 354-4260281F1
Telescoping Pole Light - 5610-48-7 - 23-5610487F1
Two-mile, 360° visibility, for boats up 65.6 ft. (20m). Stores easily in less space than conventional stern light and can be removed quickly from the any Attwood pole light base. Aluminum pole telescopes from 26" to 42". Includes 12-watt lamp.
Tekonsha 7 Way Blade Tester & Emulator W/Led Display - 6562 - 220-6562F1
7-Way Trailer Emulator is used for the proper installation and set-up of a brake control when a trailer is not readily available. Brake control set-up is accomplished using a built-in load module that will simulate electric magnet brakes on a trailer. The emulator will also check electrical continuity of all circuits in the 7-Way blade style connector.
Technology Research Straight Reverse Adapter, 30A-15A - 95225508 - 802-095225508F1
Adapts 30A male to 15A female.
Technology Research Straight Adapter, 15A-30A - 95215508 - 802-095215508F1
Adapts a 15 Amp male plug to a 30 Amp female.
Technology Research Hardwire Surge Guard, 50A - 35550 - 802-35550F1
Permanently installed Surge Guard protects your RV bumper to bumper from faulty park power. Protects from the weather and theft and eliminates handling. UL Listed. Automatically shuts off the power when excessive voltage, Low (Less than 102V) and High (Greater than 132V), or open neutral is present. Automatic reset on power restoration. Caution indicator light indicates miswired pedestal, reverse polarity and elevated ground voltage. 128 second reset delay protects A/C compressor. Fits neatly inside RV's electrical compartment. Weather resistant. Joules of surge protection. Easy installation. UL Listed. Optional Remote Power Monitor LCD Display, sold separately. Plugs into remote port on Surge Guard models 34520 and 34560. Conveniently and remotely monitors RV electrical power. Detailed fault screens show 16 information fault screens, incoming line voltages and current being used. Joystick offers easy screen navigation. Stores faults (if any). Plug and Play. Connects to a RJ12 (6 pin) connector cable (included).Not compatible with previous models that do not have a telecon jack.
Technology Research 90° Angle Adapter, 15A-30A - 95245508 - 802-095245508F1
Adapts 15A to 30A.
Tech-Edge Smart Mini Tank Monitor - Smart Mini Kit - 954-Led1102Minif1
Made for single tank monitoring. It displays the tank levels in quarters (E, 1/4, 1/2, 3/4, & F) with a series of LEDs. The one tank unit is pot(less) through the use of new Smart Chip technology. Only a button push at empty and full is required to accurately calibrate your tank. Monitors composite fresh water, waste water and fuel tanks.
Teardrop Led Mini-Lantern Green - 50-08191 - 50-08191F1
Portable, durable and lightweight Loop hanger Weather resistant White light 3 light modes: 100% / 50% / Flashing Batteries included
Taylor Solar Led Surface Mounted Light Set - 46308 - 32-46308F1
Taylorbrite Solar LED Surface Mounted Light Set doesn't require any holes to be drilled. This surface mount light is only 1/2" tall and the side mounted wires allow for a clean appearance. 3 AA NiMH user replaceable batteries. 3 light extension pack available. Emits a warm white light.
Taylor Solar Aluminum Dock Light - 46310 - 32-46310F1
The Marine Grade Solar Deck Lite is an industrial strength solar powered dock light made from anodized aluminum for superior weather resistance in marine environments. IP68 waterproof design. Super bright LEDs, powerful solar panel and changeable AA (NiMH) batteries provide all night illumination. Added built-in reflector provides extra safety for passing boaters and makes them ideal for marking swim rafts. Easy hassle-free mounting with no wires.
Taylor Recessed Wired Light Extension Pack - 46307 - 32-46307F1
Quickly add more lights to your recessed wired light set. This pack of three additional lights easily connects to your existing lights. You can add up to two extension packs, running a total of nine lights off one solar panel.
Taylor Led Sport Spot Light - 2002 - 32-2002F1
Perfect for Illuminate live wells, rod lockers, under seat storage areas and more. Accommodates square or round tube (3/4" up to 1 1/4")Multiple Modes: fast flashing, slow flashing, on and off50 hours of steady light/100 hours of flashing lightInstalls in seconds almost anywhere, no tools neededWater resistantSmall and compactSuper Bright white LED lightBatteries included
Taylor Led Solar Rope Light - 46302 - 32-46302F1
4.5V 2.5W Solar PanelWhite LEDs spaced about 2" apartReplaceable lithium batteries6' Lead from panel to light for installation on post or pilingLighting time up to 12 hours with full charge
Taylor Hidden Hold-Down Fasteners With Nuts And Rubber Grommets (4 Per Pack) - 1607 - 32-1607F1
Come complete with nuts and rubber grommets.
Taylor E-Z Grommet Set Includes Hole Punch, Setting Tool And 18 #2 Brass Grommets And Wahers - 1365 - 32-1365F1
Perfect for boat covers, tarps, tents and fabric. Quickly installs #2 size grommets with 3/8" hole. Set contains hole punch, setting tool and 18 #2 brass grommets and washers. "Vision Packed" on display card.
Taylor 2021133089 Sureshade Power Bimini W/Battery Option, Beige W/Black Anodized Frame - - 32-2021133089 Superseded By: 239-2024050705F1
Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty
Taylor 2021133088 Sureshade Power Bimini W/Battery Option, Beige W/Clear Anodized Frame - - 32-2021133088 Superseded By: 239-2024050709F1
Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty
Taylor 2021133086 Sureshade Power Bimini W/Battery Option, Black W/Clear Anodized Frame - - 32-2021133086 Superseded By: 239-2024050714F1
Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty
Taylor 11992 Super Support Pole W/Canvas Snap, Grommet Tip & Plain End Cap, 36"-64" - 11992 - 32-11992F1
This fully adjustable aluminum support pole is 3 support poles in one. Includes a male canvas snap, grommet tip, and plain end cap with the pole. If you have a female canvas snap or a grommet on your boat cover, you can get a support that will work with your cover. A durable plastic adjuster sets the correct height for your cover.
Taylor #2 Brass Grommets And Washers (12 Sets) - 1231 - 32-1231F1
Perfect for boat covers, tarps, tents and fabric. Quickly installs #2 size grommets with 3/8" hole. Set contains 18 #2 brass grommets and washers. "Vision Packed" on display card.
Taco Metals T-Top Led Tube Light - F38-2060R-1 - 236-F382060R1F1
Impact-resistant and waterproof (non-submersion) the Tube light is designed & tested to withstand use in marine and other outdoor environments. TACO's T-top Tube Light makes it easy to upgrade to LED. The T-top Tube light is a great replacement light and will fit most standard florescent T-top light housings. With its sleek, finished appearance and mounting clamps (included) the Tube Light can be used as-is and easily mounted to T-tops.Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on standard 12V batteries. Its generous 18' length of safe shielded cable is great for use on tops, bridges and towers of all sizes. 108 LED lights available in either white/red or white/blue300-lumens of white light / 150-lumens of color light3 way switch on end of light, toggles from color, to white, to offLow draw of less than .5 ampsIP67-waterproof (non-submersible) ratingMounting clips included for easy installationImpact-resistant polycarbonate lens14 feet of wiring cable1-year limited warranty
Taco Metals T-Top Led Tube Light - F38-2060B-1 - 236-F382060B1F1
Impact-resistant and waterproof (non-submersion) the Tube light is designed & tested to withstand use in marine and other outdoor environments. TACO's T-top Tube Light makes it easy to upgrade to LED. The T-top Tube light is a great replacement light and will fit most standard florescent T-top light housings. With its sleek, finished appearance and mounting clamps (included) the Tube Light can be used as-is and easily mounted to T-tops.Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on standard 12V batteries. Its generous 18' length of safe shielded cable is great for use on tops, bridges and towers of all sizes. 108 LED lights available in either white/red or white/blue300-lumens of white light / 150-lumens of color light3 way switch on end of light, toggles from color, to white, to offLow draw of less than .5 ampsIP67-waterproof (non-submersible) ratingMounting clips included for easy installationImpact-resistant polycarbonate lens14 feet of wiring cable1-year limited warranty
Taco Metals Flat Mount White 4-Led Deck Light - F38-8800W-1 - 236-F388800W1F1
Unique, low profile LED multi purpose deck light designed for flat mount. Ideal for hard tops, consoles, interior cabin, under gunnel. Equivalent to a 55 watt halogen flood light100° Light spreadVery low power consumption (.6 Amps @ 12V8' power cableAnodized aluminum heatsinkLED chips are silicone potted for IP67 waterproof
Taco Metals F38-6600 Rub Rail Mounted Led Navigation Lights - F3866021 - 236-F3866021F1
Rub Rail mounted LED navigation lights enable the elimination of deck mounted versions. These LED lights are mounted in a heavy gauge Stainless Steel joiner cover. Anodized aluminum heat sink for maximum heat dissipation. Water-resistant. Reliable long-life LEDs will provide years of maintenance-free service. 3-Watt Port (Red) and Starboard (Green) LEDsEnables more deck spaceEasy installationMeets ABYC/USCG requirements
Taco Metals F38-2050R-1 Red Led 20" Luma T-Top Light - F38-2050R-1 - 236-F382050R1F1
Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on batteries. It's generous 18' of safe, shielded cable is ideal for use on tops, bridges and towers of all sizes. Polished anodized housing is pre-drilled for easy hook-up and is an attractive addition to any top.
Taco Metals F16-0810-1 "Come On Board" Boarding Angled Handle - F16-0810-1 - 236-F1608101F1
TACO Marine's boarding handle is ideal for boats on the water where constant boarding is necessary with a large grabbing surface for comfort grip. The finger molded handle pipe design assures a more secure and comfortable grip. A two piece fixed mount design for easy storage. Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat. Stainless Steel Type-304Unique finger molded groove handle design for comfort grip1-1/2" Diameter tube fits into standard 1-5/8" rod holdersMultiple piece design for easy storage
Taco Gs960 Grand Slam 960 Electric Masthead Anchor Light, 3-Nm, 40.43" - Gs-960 - 236-Gs960F1
The oblong design accommodates a longer, more powerful motor for excellent performance at sea. Suitable for powered vessels up to 39' (12 meters). This is a fully electric unit with a hidden base wire inside the hardtop, which easily installs to the top's surface. The GS-960 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Certified for USCG-required 3-NMIncludes heavy-duty anodized aluminum tube, light and 6" lead of 20-gauge wire from the base5-Watt Stern Light and 10-watt AnchorLow-draw, 0.6 amps per lightElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descentNo under-mount clearance neededSmooth lift and descentHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on the stainless-steel breakaway pin allows for manual operation1-year limited warranty
Taco Gs9001 Grand Slam 900 Masthead Anchor Light, 39-1/2" - Gs-900-1 - 236-Gs9001F1
Safe, no-hassle raising and lowering of an masthead anchor light Ideal for boats 39' in length or shorterCertified USCG for 3 NMStandard 1"-14 thread (male) shaftIncludes 32.75" of tube that can be cut to lengthFour 3-watt LED Cree chipsWater-resistance IP66 ratingMachined / Anodized aluminum body with a light brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate
Taco Gs90 Grand Slam 900 Electric Masthead Anchor Light, 39-1/4" - Gs-950 - 236-Gs950F1
With the simple push of a button, boaters can safely adjust the position of their Masthead Anchor Light from the comfort of the helm. Ideal for powered vessels 39' and under (12-meters and under), the GS-950 is certified for USCG-required 3 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Machined / Anodized aluminum bodyCertified for USCG-required 3-nmIncludes tube, light and 6" lead for 12-volt DC power supply for lightThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRemovable pin for manual adjustmentMounts to all hardtopsFour 3-watt LED Cree chips6-Watt Stern Light and 12-watt Anchor
Taco F389960 2-9/16" Suproflex Mounted Led Navigation Light Set - F38-9960 - 236-F389960F1
Designed specifically for SuproFlex. This sleek, low-profile navigation light fits V11-9960, V11-9990 and V11-9950 (OEM only) SuproFlex profiles, meets ABYC and USCG requirements for both sail and powerboat designation and has a water-resistant IP68 rating for hours of maintenance-free use. Ideal for boats up to 30'Sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck spaceEasy to installProvides a 112.5-degree unobstructed view with less glareMeets ABYC/USCG requirements for both sail and powerboat designationLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationWater-resistant IP68 ratingUses #8 stainless steel fasteners, not included
Taco F386810B 4" Rub Rail Mounted Led Navigation Light Set - F38-6810B - 236-F386810Bf1
Sleek, low-profile lights designed to allow for cleaner, open decks with unobstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation, have a water-resistant IP68 rating and provide hours of maintenance-free, reliable use. Ideal for up to 30' boats and designed to fit the popular 3/4-inch insert profilesSold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck space and easy to installProvides a 112.5° unobstructed view with less glareCertified for ABYC/USCG-approved 2 NMLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationLED lights are mounted in a heavy gauge polished stainless-steel joiner coverWater-resistant IP68 ratingRequires #8 stainless-steel fastener (not included)
T-One T-Connector Harness 4 Way Flat - 118847 - 220-118847F1
T-One Connector Repl. 119146 - 119147 - 220-119147F1
Draws power directly from the vehicle battery and uses less than 5 mA of the vehicle circuit for sensing to turn the trailer functions on and off Will work with either LED/Incandescent bulbs (vehicle & trailer)The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the convertor to turn on fully and gives the trailer lights full brightness during activationThe trailer brakes will override the hazard lamps when the brake is activatedThe unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuitWill work with most vehicles that have a multiplex system for lightingCan be used on a 2-wire or 3-wire systemIncludes integrated protective cover
T-H Underwater Light With Stainless Steel Bezel - Led-51901-Dp - 232-Led51901Dpf1
316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water
T-H Underwater Light With Stainless Steel Bezel - Led-51900-Dp - 232-Led51900Dpf1
316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water
T-H Premium Underwater Light - Led-39062-Dp - 232-Led39062Dpf1
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire
T-H Premium Underwater Light - Led-39061-Dp - 232-Led39061Dpf1
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire
T-H Premium Underwater Light - Led-39060-Dp - 232-Led39060Dpf1
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire
T-H Marine Waterproof White Led Lighted Rim Drink Holder - Led-Lch-W-Dp - 232-Ledlchwdpf1
Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished LookLED Light System is WaterproofIncludes Drain Hole and Nipple for Routing DrainageWired for 12V
T-H Marine Waterproof Stainless Steel Led Underwater Light - Led-Sm7815-B-Dp - 232-Ledsm7815Bf1
This surface mount, stainless steel underwater light is highly attractive, with superior brightness and durable construction. Completely waterproof, this 316 stainless steel bezel light will last for many years in the toughest marine environments. 5.7"x1.7" . Overheat ProtectionResistant to Corrosion, UV and ChemicalsFully Sealed and Waterproof Light - IP68 RatedVery Easy to Install with Two (2) Screws and Small Wiring HoleSix (6) Super Bright LED Diodes
T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm173Cob-G-Dp - 232-Ledsm173Cobgdpf1
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection
T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm172Cob-B-Dp - 232-Ledsm172Cobbdpf1
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection
T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm171Cob-W-Dp - 232-Ledsm171Cobwdpf1
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection
T-H Marine Waterproof Blue Led Lighted Rim Drink Holder - Led-Lch-Bu-Dp - 232-Ledlchbudpf1
Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished LookLED Light System is WaterproofIncludes Drain Hole and Nipple for Routing DrainageWired for 12V
T-H Marine Utility/Rod Grommets (Pair), Black - Ug2Dp - 232-Ug2Dpf1
Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).
T-H Marine Utility/Rod Grommets (Pair), Black - Ug1Dp - 232-Ug1Dpf1
Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).
T-H Marine Stainless Steel Wire Mesh Strainer Fits Th1, 1Xl, 90, 92 Thru-Hulls - As2Dp - 232-As2Dpf1
Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base.
T-H Marine Stainless Steel Wire Mesh Strainer Fits Aerator Pump Intake - As1Dp - 232-As1Dpf1
Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base.
T-H Marine Shark Eye Nav Lights 1Nm (Pair) - Sel1Dp - 232-Sel1Dpf1
T-H Marine Shark Eye Nav Lights 1NM (Pair) Meets ABYC A-16 & USGC 1 NMNMMA type acceptedStainless steel baseTin wirePair: (1) Red, (1) Green
T-H Marine Mini Livewell/Courtesy Light Led-Potted, White - Lwlm1Pleddp - 232-Lwlm1Pleddpf1
T-H Marine Mini Livewell/Courtesy Light LED-Potted, White Totally waterproof, can be mounted underwaterNeoprene sealing gasket includedBright 3-element LED bulbFits 5/8" Hole
