Inboard Alternator - 18-6928 - 47-6928F1

These all NEW replacement alternators meet OEM specs and meet or exceed OEM output for guaranteed performance. Fans, pulleys and hardware are plated to resist corrosion and special marine flame arrestor screens eliminate open sparks which can cause explosions and fire. Wiring harnesses are supplied as required by application for ease of installation. All alternators are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Alternator - 18-6953 - 47-6953F1

These all NEW replacement alternators meet OEM specs and meet or exceed OEM output for guaranteed performance. Fans, pulleys and hardware are plated to resist corrosion and special marine flame arrestor screens eliminate open sparks which can cause explosions and fire. Wiring harnesses are supplied as required by application for ease of installation. All alternators are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Alternator - 20815 - 57-20815F1

Fits: MercrusierInternal fan50-mm multi-groove serpentine pulley includedNew

Inboard Alternator - Volvo Penta - 80108 - 57-80108F1

Fits: Late Model Volvo PentaReplaces: Paris Rhone/Valeo: A13N1M, A13N2M, A13N147M, A13N148M, Volvo Penta: 841762, 841762-8, 841378-3, 841765-1, 872018-7, 872235-7, 841766-9, 858838-6, 858839-4, 842765, 858838, 858839 12 volt - 55 ampInternal regulator Pulley not included

Inboard Starter - 18-6872 - 47-6872F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - 18-6931 - 47-6931F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - 18-6934 - 47-6934F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - 18-6935 - 47-6935F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - 18-6944 - 47-6944F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - 18-6956 - 47-6956F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - 18-6958 - 47-6958F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Inboard Starter - Volvo Penta - 10113 - 57-10113F1

Fits: Volvo Penta4cyl., 6 cyl. gasAluminum pinion housing with 2 threaded mounting holesPermanent magnet, 12 volt

Inboard Starter-Gm - 30433 - 57-30433F1

Standard duty, direct OEM replacement gear reduction starter.Fits all GM engines w/14" flywheel using a staggered bolt pattern. Recommended for late model 3.0 Liter with 14" flywheel using tail bracket.

Ind. Connector 15 Amp - 2402-Bss - 661-2402F1

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Infl. Top Coating Light Gray - Mdr-789 - 79-Mdr789F1

Restores inflatables back to their original color and luster from a multi-colored, faded or discolored condition. Can be used on hypalon, pvc, or rubber inflatables. An easy to apply waterbased formula. Cleans up with water, flexible enough to last even when folded. For storage, one quart covers approx. 100 sq. ft. Keeps inflatables looking like new.

Inflatable 250 Aluminum Floor Light Grey 8 Hp Max Not For Resale In U.S. - Aa250033N - 720-Aa250033Nf1

Inflatable 270 Alum Rib Light White 10 Hp Max Not For Resale In U.S. - Aa270160N - 720-Aa270160Nf1

Inflatable 290 Alum Rib Light White 15 Hp Max Not For Resale In U.S. - Aa290024N - 720-Aa290024Nf1

Inflatable 300 Aluminum Floor Light Grey 15 Hp Max Not For Resale In U.S. - Aa300065N - 720-Aa300065Nf1

Inflatable 320 Aluminum Floor Light Grey 20 Hp Max Not For Resale In U.S. - Aa320037N - 720-Aa320037Nf1

Inline 30 Amp Fuse Holder - 420565-1 - 354-4205651F1

ACG Watertight Inline Dual Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse and an extra emergency fuse. Fuse holder has a specially designed case that is molded with a second fuse pocket for convenient access to a spare fuse.

Inline 50 Amp Fuse Holder - 420557-1 - 354-4205571F1

AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.

Inline Fuse - 420500-1 - 354-4205001F1

AGC Inline Fuse Holder is constructed with Injection molded nylon. Overcurrent protection in a convenient push together inline holder. To install, cut a 11-1/2" wire lead from 14 gauge wire and strip both ends. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 20A @ 12VDC. 20A AGC fuse included.

Inline Fuse Holder - 445199-1 - 354-4451991F1

ATO/ATC Inline Fuse Holder is constructed of injection molded, fiberglass reinforced nylon. Designed to accept ATO/ATC automotive-style spade terminal fuses. Maximum: 30A. 14 gauge 4" AWG wire lead. Fuse not included. Use with fuses (445101-445130).

Inline Fuse Holder (Waterproof - 420552-1 - 354-4205521F1

AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.

Inline Fuse Holder (Waterproof - 420553-1 - 354-4205531F1

AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.

Inline Fuse Holder (Waterproof - 420554-1 - 354-4205541F1

AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.

Inline Fuse Holder (Waterproof - 420555-1 - 354-4205551F1

AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.

Inr Mbr Dx8.5L Drm No Solenoid Ufp - 099-184-00 - 641-9918400F1

Insta Trim 12657B Outside Housing W/O Female Wire Receptacle - 12657-B - 754-12657Bf1

Outside Housing w/o Female Wire Receptacle

Insta Trim 12701 12V Soleniod Valve W/White Wire - 12701 - 754-12701F1

12V Soleniod Valve w/White Wire

Insta Trim 12735 25' Wire Harness - 12735 - 754-12735F1

25' Wire Harness

Intellisteer Type A Wireless Steering - Inttypea - 491-Inttypeaf1

Control Unit for Existing Drives or Autopilot. No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot DriveWhen the Intellisteer Wireless Controller is activated it will disconnect the autopilot and provide wireless jog steering control from anywhere on the boatWhen the Intellisteer Wireless Controller is turned off, the Autopilot will function as beforeEasy DIY installation, no professional installer needed2 year limited warranty, purchase with confidence Includes: Wireless Control (meets FCC standards, auto shut-off, waterproof, over 1M control codes), Receiver Module, Easy to use installation kit.

Intellisteer Type H Wireless For Hydraulic Steering - Inttypeh - 491-Inttypehf1

Intellisteer Type S Wireless For Mech Steering W/O Tilt - Inttypes - 491-Inttypesf1

Intellisteer Type T Wireless For Mech Steering W/Tilt - Inttypet - 491-Inttypetf1

Interlux Yaa8672G Interfill 830 Lightweight Epoxy Fairing Compound, Part A Base, Gal. - Yaa867/2 - 94-Yaa8672Gf1

A special 2-component, light grey, epoxy that fills gaps of up to 800 mils without sagging. This makes it perfect for profiling above and below the waterline on steel, aluminum and composite hulls. A waterproof, high strength and impact resistant epoxyFills gaps of up to an inch with saggingEasy to sand and fast curing times at lower temperatures

Interlux Yaa8692G Interfill 830 Lightweight Epoxy Fairing Compound, Part B Fast Cure2 Gal. - Yaa869/2 - 94-Yaa8692Gf1

Interfill 830 Fast Cure is the best choice for profiling above and below the waterline on Steel, Aluminium and Composite hulls. The special two-component light grey epoxy formulation can fill up to a thickness of 800 mils in one coat without the risk of sagging/slumping. Fast curing at lower temperatures and low density compositionHigh-strength and impact resistance, waterproof and easy to sandWhen sanded, the surface is smooth enough to be directly overcoated

Inverter Chrg 3000W 150A - Wf-7230 - 715-Wf7230F1

Iota Dls-45 45 Amp Power Converter Battery Charger - Dls-45 - 683-Dls45F1

The DLS-45 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging. As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 45 amps. As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-45 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells. INPUT VOLTAGE: 108-132 VACINPUT FREQUENCY: 50-60 HzOUTPUT VOLTAGE: 13.4 VDCOUTPUT AMPERAGE: 45 Amps

Iota Dls-55 55 Amp Power Converter Battery Charger - Dls-55 - 683-Dls55F1

The DLS-55 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging. As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 55 amps. As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-55 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells. INPUT VOLTAGE: 108-132 VACINPUT FREQUENCY: 50-60 HzOUTPUT VOLTAGE: 13.4 VDCOUTPUT AMPERAGE: 55 Amps

Iota Dls-75 75 Amp Power Converter Battery Charger - Dls-75 - 683-Dls75F1

The DLS-75 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging. As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 75 amps. As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-75 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells. INPUT VOLTAGE: 108-132 VACINPUT FREQUENCY: 50-60 HzOUTPUT VOLTAGE: 13.4 VDCOUTPUT AMPERAGE: 75 Amps

Isolator 2Alt 2Bat 70Amp Pmg - 02-70-2 - 175-2702F1

Isolator Bolts, 4-Pack - 69060 - 452-69060F1

Easily install your anchor winch, trolling motor and other accessories from the top of your boat deck - great when you can't reach under the deck! Protects your boat from vibrations. Marine-grade 316 stainless steel bolts are easily installed in a 1/2" hole with Phillips head screwdriver. For accessory frames up to 1-1/8" thick.

Jabsco 18670-9407 Self Priming Wakeboard & Ski Boat 8.4 Gpm Ballast Pump W/O Reversing Switch W/Mastercraft Oem Connector - 18670-9407 - 6-186709407F1

Utilizing our reversible flexible impeller pump technology, ballast systems can be filled or emptied. Available with or without Reversing Polarity Switch to fill or empty ballast tanks. Includes run-dry impeller. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). 1" (25mm) hose barb or 1/2" NPT internal port.Includes Mastercraft OEM Connector, No Reversing Switch.NOT TO BE USED IN POTABLE WATER SYSTEMS.

Jabsco 22610-9407 Self Priming Wakeboard & Ski Boat 15 Gpm Ballast Pump With Deutsch Connector - 22610-9427 - 6-226109427F1

This self-priming pump can deliver almost 80lbs of water per minute and is reversible to both fill and empty ballast tanks. Run-dry protection shuts off pump before impeller is damaged. Complies with USCG 183.410 and ISO 8846 for ignition protection. Ports: 1/2" NPT internal thread and 1" external hose barb. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Jabsco 370382012 Solenoid Valve 12V - 37038-2012 - 6-370382012F1

Jabsco 441071000 Discharge Port, 1" - 44107-1000 - 6-441071000F1

For 37010-Series Jabsco electric toilets.

Jabsco 44411-0045 White Straight Port In-Line 45 Psi Water Pressure Regulator - 44411-0045 - 6-444110045F1

Protects your boat's water system from damaging pressures of unregulated city water hook-ups. In-line models have 3/4" FGHT garden hose inlet and 3/4" MGHT garden hose outlet. Manufactured of food grade materials.

Jabsco 44412-1045 White 90° Port Flush 45 Psi Water Pressure Regulator - 44412-1045 - 6-444121045F1

Protects your boat's water system from damaging pressures of unregulated city water hook-ups. Flush mount models have 3/4" FGHT garden hose inlets and 1/2" NPT male outlet connections. Manufactured of food grade materials. Removable strainer.

Jabsco 44412-2045 Chrome 90° Port Flush 45 Psi Water Pressure Regulator - 44412-2045 - 6-444122045F1

Protects your boat's water system from damaging pressures of unregulated city water hook-ups. Flush mount models have 3/4" FGHT garden hose inlets and 1/2" NPT male outlet connections. Manufactured of food grade materials. Removable strainer.

Jackplate Wire Harness - Dk4420 - 861-Dk4420F1

Jaeger-Unitek 1000036592 Highwire® Technology .91 Bulb 1.25 Wipe 35Ft Per Box (Old #04003186) - 1000036592 - 987-1000036592F1

Goes a step further with the incorporation of a smart hook feature. Not only does it impeccably secure slide-out motor wire harnesses, but it also excels in concealing them, ensuring a sleek and tidy appearance. Takes the installation processes to a new level, providing a seamless integration of form and function. Designed for ease of assembly by RV OEM's during slide-out mechanism installationProvides OEM's with the ability to sole source their RV sealing package from slide-out mechanism producer to OEMEliminates risks of an unrestrained wire during consumer use and slide-out cycling

Jaeger-Unitek 1000036593 Highwire® Technology .91 Bulb 1.69 Wipe 35Ft Per Box (Old #04003187) - 1000036593 - 987-1000036593F1

Goes a step further with the incorporation of a smart hook feature. Not only does it impeccably secure slide-out motor wire harnesses, but it also excels in concealing them, ensuring a sleek and tidy appearance. Takes the installation processes to a new level, providing a seamless integration of form and function. Designed for ease of assembly by RV OEM's during slide-out mechanism installationProvides OEM's with the ability to sole source their RV sealing package from slide-out mechanism producer to OEMEliminates risks of an unrestrained wire during consumer use and slide-out cycling

Jbl Stadiummw6520Am Stadium Marine 6-1/2" Coaxial Speakers W/Rgb Lighting, White, 1 Pr - Stadiummw6520Am - 546-Stadiummw6520Amf1

Marine loudspeakers built to survive the rigors of the harsh marine environment with Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Speakers are UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. Power Handling: 100 watts RMS, 300 watts peak power160mm integrated grillesSensitivity: 92dB at 2.83 voltsFrequency Response: 40 ± 25kHzVoice Coil Diameter: 1 in. (25.5mm)Impedance: 3 ohm impedance

Jbl Stadiummw8030Am Stadium Marine 8" 3-Way Convertible Speakers W/Rgb Lighting, White, 1 Pr - Stadiummw8030Am - 546-Stadiummw8030Amf1

Marine loudspeakers built to survive the rigors of the harsh marine environment with Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Speakers are UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. To increase acoustics and installation versatility, these speakers can be installed as is (three way speaker) or separated and installed as a components system. This is handy for working around placement option restrictions. Power Handling: 200 watts RMS, 500 watts peak powerSensitivity: 92dB at 2.83 voltsFrequency Response: 30 - 22kHzVoice Coil Diameter: 1 in. (25.5mm)Impedance: 3 ohm impedanceFlush mount adapter with Integrated grille

Jec Me518 Type I (Qcc) Connector - Me518 - 277-Me518F1

Type I (QCC) connectors have a built-in excess flow feature and a positive shutoff that will not allow gas to flow until the connector is fully engaged. In case of a fire the built-in thermal protection on the QCC connector melts allowing the nipple to disengage from the tank connection and stop the flow of propane. They also provide a positive back check seal at disconnect to eliminate the propane in the hose from being released into the atmosphere.

Jensen Marine Am/Fm 6' Dipole Wire Antenna - 8309819 - 650-8309819F1

AM/FM 6' Wire Antenna

Jensen Voyager Wvsxm43 4.3" Wireless Monitor - Wvsxm43 - 650-Wvsxm43F1

Supports up to four wireless cameras simultaneously Auto-Pairing capability allows monitor to be paired with any of the wireless cameras with the touch of a buttonStrong signal transmits through and around objects up to 60 feet awayBright 4.3" displaySupports normal and mirrored camera imageDisplays graphic overlay that shows real-time distance from objectsBuilt-in speakerSuction cup mount and 12V DC plug included

Jl Audio 0100336400 Mmr-25W Wireless Remote Controller - 010-03364-00 - 326-0100336400F1

Outfitted with ultra-efficient, Bluetooth Low Energy technology, the MMR-25W controller delivers convenient handheld command of your MediaMaster source unit (MM105 or MM105-HR), from up to 35 ft (11 m) away.Featuring a sealed, water-resistant (IP68 rated) design and large button layout, the MMR-25W remote controller incorporates an ergonomic, key-fob form that allows comfortable operation of frequently used functions, all while on the move. Onboard LEDs permit easy selection and adjustment of all or specific audio zones.Constructed with UV and salt-water rated materials, the MMR-25W controller is built to withstand the harshest outdoor elements. For added convenience, a silicone wrist lanyard and mounting cradle are included. The cradle's simplistic design permits installation on any flat surface. A replaceable 3 V (CR2032) battery is also included. Up to eight remotes1 can be directly paired to a single source unit (additional remotes sold separately).

Jl Audio 0100348900 M6 Marine Subwoofer, M6-10W-S-Gmti-I-4, 10" Diameter, Titanium, Sport Grille & Transflective™ Led Lighting - 010-03489-00 - 326-0100348900F1

Optimized for high-powered operation, M6 marine subwoofers can be installed in various applications and are built to withstand the rigors of marine use. Delivers powerful deep bass in open-air applicationsModels for use with or without a dedicated enclosureGrille and trim ring are easily removable for paintingExceeds international standards for salt fog and UV exposure^8" Specifications: Continuous power handling (RMS): 200 W, Sensitivity (SPL @ 1 W/1 m): 86.8 dB, Recommended amplifier power (RMS): 50-200 W.^10" Specifications: Continuous power handling (RMS): 250 W, Sensitivity (SPL @ 1 W/1 m): (IB): 86.1 dB / (W): 86.4 dB, Recommended amplifier power (RMS): 75-250 W.^Models with Transflective™ LED Lighting: a patented system on sport models for smooth lighting with no hot spots or reflections.

Jl Audio 0100349100 M6 Marine Subwoofer, M6-10W-S-Gwgw-I-4, 10" Diameter, White, Sport Grille & Transflective™ Led Lighting - 010-03491-00 - 326-0100349100F1

Optimized for high-powered operation, M6 marine subwoofers can be installed in various applications and are built to withstand the rigors of marine use. Delivers powerful deep bass in open-air applicationsModels for use with or without a dedicated enclosureGrille and trim ring are easily removable for paintingExceeds international standards for salt fog and UV exposure^8" Specifications: Continuous power handling (RMS): 200 W, Sensitivity (SPL @ 1 W/1 m): 86.8 dB, Recommended amplifier power (RMS): 50-200 W.^10" Specifications: Continuous power handling (RMS): 250 W, Sensitivity (SPL @ 1 W/1 m): (IB): 86.1 dB / (W): 86.4 dB, Recommended amplifier power (RMS): 75-250 W.^Models with Transflective™ LED Lighting: a patented system on sport models for smooth lighting with no hot spots or reflections.

Jl Audio 0101342800 Mlc-Rw Marine Lighting Controller - 010-13428-00 - 326-0101342800F1

The marine lighting controller is an advanced controller designed for managing RGB LED lighting circuits. Outfitted with PWM technology and high-capacity circuitry, the marine lighting controller produces up to 30 amps (400 W) of continuous output to power modern, multi-LED networks. All LED functions are easily controlled with the included rotary encoder or using your handheld device via built-in Wi-Fi® connection.

Johnson Pump 1061501 Washdown Spray Pistol/Connector W/Hose, 1/2" X 25' - 10615-01 - 189-1061501F1

Durable coiled hose True 1/2" inside hose diameterHeavy duty plastic spray pistolCost effective reliable replacement for any wash down pump hose and spray pistol

Johnson Pump 40057 Water Pressure Regulator For Deck Wash - 40057 - 189-40057 Superseded By: 17-40052F1

Reduces city water pressure to 40-50 psi Corrosion resistant bronzeStandard 3/4" GHT thread for easy hook up NOT TO BE USED IN POTABLE WATER SYSTEMS.

Johnson Pump 5406122Pk 1-1/8" Threaded Discharge Port For 1600/2200 Gph Hd Bilge Pump - 54061-22Pk - 189-5406122Pkf1

1-1/8" Threaded Discharge Port

Johnson Pump 5406123Pk 1-1/4" Threaded Discharge Port For 1600/2200 Gph Hd Bilge Pump - 54061-23Pk - 189-5406123Pkf1

1-1/4" Threaded Discharge Port

Johnson Pump 60000 Cartridge Style Aerator Kit (Includes Battery Clips, Head And Mounting Feet) - 60000 - 189-60000F1

Great for ice chests or other livewell containers! Fills, aerates & empties any livewell. Kit includes:Cartridge aerator pump with low current drawAeration spray bar with split design allows for flexible mounting with screws or supplied suction feetFish foam filterMounting brackets and mounting suction cups5' flexible tubingBattery clips and 10' of wire includedUse with fresh or saltwater

Johnson Pump 61155 Spray Pistol With Hose Connector - 61155 - 189-61155F1

Spray Pistol with hose connector. Compatible with either the 3.5 or the 5.2 Wash Down Pump Kits.

Johnson Pump 81-47301 Solenoid Valve - 81-47301-01 - 189-814730101F1

Solenoid valve used with toilet systems with a central water pressure feed system. Easy to install. Positive action plunger system open and closes quickly and reliably.

Johnson Pump 82024 12V Washdown Control Panel - 82024 - 189-82024F1

2-way wash down switch panel. It features an easy-to-reach fuse holder. Works with all Johnson Pump wash down pumps.

Johnson Pump Toilet Panel Switch, 24V - 81-36105-01 - 189-813610501F1

Panel switch for Aqua-T Electric Toilet

Johnson/Evinrude Rectifier - 153-3408 - 667-1533408 Superseded By: 47-5708F1

See CDI catalog for complete application information.

Johnson/Evinrude Rectifier - 18-5708 - 47-5708F1

Johnson/Evinrude Rectifier - 18-5709 - 47-5709F1

Johnson/Evinrude Solenoid - 18-5814 - 47-5814F1

Isolated base

Jumper Terminal 2400 Ser. 5/Pk - 9218-Bss - 661-9218F1

Allows creation of common circuits on independent connectors. Nickel-plated brass. Continuous amperage - equivalent to matching block.

Jumper Terminal 2500 Ser. 5/Pk - 9217-Bss - 661-9217F1

Allows creation of common circuits on independent connectors. Nickel-plated brass. Continuous amperage - equivalent to matching block.

Jumper Terminal 2600 Ser. 5/Pk - 9216-Bss - 661-9216F1

Allows creation of common circuits on independent connectors. Nickel-plated brass. Continuous amperage - equivalent to matching block.

Kit Xt 170A Df Alternator Mc Regulator Tsensors J10Pul - Xtdf170J10Kit - 684-Xtdf170J10Kitf1

Klean Strip Gklo145 Boiled Linseed Oil, Gallon - Gklo145 - 986-Gklo145F1

For Pro's and DIY'ers, Klean-Strip® is the leading brand of solvents, thinners, removers, and cleaners that are dependable for reliable results. Klean-Strip® Boiled Linseed Oil is a classic wood finish that both protects and seals. It improves flow and gloss of oil-based paints while also increasing the durability of dried paint to bring out the natural beauty of wood. Read entire label prior to use or storage. Keep out of reach of children.

Klean Strip Qklo146 Boiled Linseed Oil, Quart - Qklo146 - 986-Qklo146F1

For Pro's and DIY'ers, Klean-Strip® is the leading brand of solvents, thinners, removers, and cleaners that are dependable for reliable results. Klean-Strip® Boiled Linseed Oil is a classic wood finish that both protects and seals. It improves flow and gloss of oil-based paints while also increasing the durability of dried paint to bring out the natural beauty of wood. Read entire label prior to use or storage. Keep out of reach of children.

Kuuma 58275 Regulator - 58275 - 735-58275F1

Regulator

Kuuma 58355 Twist Lock Regulator Replacement Part For Profile 150, Stow N' Go 125 & Kettle Grills - 58355 - 735-58355F1

This is the Twist Lock Regulator for the Profile 150, Stow N' Go 125 & Kettle grills.

Kuuma 58356 Twist Lock Regulator Replacement Part For Stow N' Go 160 Grill - 58356 - 735-58356F1

This is the Twist Lock Regulator for the Stow N' Go 160 grills.

Kuuma 58357 Twist Lock Regulator Replacement Part For Profile 216, Stow N' Go 610 & Elite 216 Grills - 58357 - 735-58357F1

This is the Twist Lock Regulator for the Profile 216, Stow N' Go 610 & Elite 216 grills.

Label Automatic Charging Relay Pmg - 8063-0524-Bss - 661-0524F1

Label Charger Inverter Pmg - 8063-0094-Bss - 661-0094F1

Label Deck Lights Aft Pmg - 8063-0125-Bss - 661-0125F1

Label Head Lights Pmg - 8063-0251-Bss - 661-0251F1

Label Searchlight Remote Pmg - 8063-0376-Bss - 661-0376F1

Lamp Naviled Pro Masthead 3Nm Black - 959940201 - 265-959940201F1

The innovative shroud and sealed lamp design ensures reliable illumination. Each NaviLED®PRO lamp is also pre-wired with 2-1/2 m of marine grade cable. Ultra low current draw, no bulbs, no maintenance, Multivolt™, safe and highly visible, fully sealed for life, UV and corrosion resistant, shock and vibration proof, pre-wired and 3 year warranty.

Led (Cree) Docking Lights - 405951-1 - 354-4059511F1

Constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating.

Led 12V Chrome Sidelights Pr - 0602Dp1Chr - 9-0602Dp1Chrf1

For replacement use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Available in chrome plated bronze or white epoxy coated bronze. Uses 10% of the energy draw of standard lights. Low heat, long life and water resistant. Vertical mount. Screw size is 8.

Led 3" Oval Spot/Underwater Light - 6343Ss7 - 23-6343Ss7F1

These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC. Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible. Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!

Led 6 Oval White Bkup Lt Grm Mount - 283565 - 274-283565 Superseded By: 158-Bul10Cbpf1

Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".

Led Amber 11/64" 12Vac - 8033-Bss - 661-8033F1

Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.

Led Amber 11/64In 120Vac - 8169-Bss - 661-8169F1

Led Bunk Light Dim 10-30V Ip40 - 41364P - 390-41364Pf1

Led Clearance Light Amber - V215A - 177-V215Af1

Led Clearance Light Red - V215R - 177-V215Rf1

Led Courtesy Button Light - 360°, White Light - 401370-1 - 354-4013701F1

Stamped 304 stainless steel and plastic. Utilizes one bright white LED that draws very low amperage and has very long life.

Led Day/Night Dome Light, Chrome - 401755-1 - 354-4017551F1

LED Day/Night Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off/on rocker switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with #8 RH fasteners (not included).

Led Dual Color Flex Strip, Blue/White - 41514P - 390-41514Pf1

Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel

Led Dual Color Flex Strip, Blue/White - 41516P - 390-41516Pf1

Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel

Led Dual Color Flex Strip, Red/White - 41515P - 390-41515Pf1

Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel

Led Dual Color Flex Strip, Red/White - 41517P - 390-41517Pf1

Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel

Led Flange Mt Oval Stop, Turn & Tail Light Kit - V822Kr-7 - 177-V822Kr7F1

A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.Includes light w/flange & pigtail.

Led Flexible Pcb 50/50 Board Rope Lights, Blue - 41521P - 390-41521Pf1

12mm LED Flexible SMD50/50 boards are encapsulated in a rectangular silicon tube that is waterproof and resistant to UV and most cleaners. Perfect for under valances, gunnels, hard tops, dive platforms and pontoon boats. Wired on both ends to simplify daisy chaining and cutting into two lengths. Can be cut every 3", and includes 12mm mounting clips and 2 silicone end caps, interior or exterior mount (IP68 waterproof rating). Dimmable (with optional 41606 controller)

Led Flexible Pcb 50/50 Board Rope Lights, Bright White - 41510P - 390-41510Pf1

12mm LED Flexible SMD50/50 boards are encapsulated in a rectangular silicon tube that is waterproof and resistant to UV and most cleaners. Perfect for under valances, gunnels, hard tops, dive platforms and pontoon boats. Wired on both ends to simplify daisy chaining and cutting into two lengths. Can be cut every 3", and includes 12mm mounting clips and 2 silicone end caps, interior or exterior mount (IP68 waterproof rating). Dimmable (with optional 41606 controller)