Scandvik Led 5 Surface Mount Euro-Dome Light With Night Light - 41345P - 390-41345Pf1

High Impact Lens and Shroud1 x 3 Watt White LED, 3,000KWhite LED Lumen: 75Surface Mount3-Stage Dimming Touch SwitchesIP65 Waterproof RatingOptional External Switch wiring included

Scandvik Led Bulb/Scan-Strip Small Display - 41140 - 390-41140F1

Counter-top POP display designed to hold a selection of top selling Scandvik replacement LED bulbs, handy base adapters and popular Scandvik Scan-Strips. Includes a header card with detailed information about which LED bulb your customer needs to replace their incandescent or Halogen bulbs.

Scandvik Led Ceiling Light W/Switch - 41340P - 390-41340Pf1

5 1/2" Diameter dome light with built in switch. Dimmable when connected to an external dimming module (steady volt)20 x 0.2 Watt 2835 LEDsNatural White (4500K)Plastic housing and high impact plastic lensSurface mountIP40 (for interior use)

Scandvik Led Courtesy Light - 41460P - 390-41460Pf1

Small size surface mount 2-LED light with Polished 304 Stainless Steel Trim. Suitable for interior or exterior installation. Stainless Steel mounting screws included.

Scandvik Led Dome Light, 5-1/2" - 41324P - 390-41324Pf1

Traditional Style Stainless Steel dome light with a prismatic glass lens. Side mounted on/off switch. Illuminated by 20 warm white LED's.12 Volt, 1.7 Watt

Scandvik Led Dome Light, 6-5/8" - 41325P - 390-41325Pf1

Traditional Style Stainless Steel dome light with a prismatic glass lens. Side mounted on/off switch. Illuminated by 20 warm white LED's.12 Volt, 1.3 Watt

Scandvik Led Flex Trak, 4' Extrusion - 41730 - 390-41730F1

Allows you to clip in 12mm flexible LED flexible PCB strips.

Scandvik Led Rgb 4 Color Controller - 41599P - 390-41599Pf1

Works with any RGB LED Material Cycles through White/Blue/Red/Green with any switch4-Second Reset to WhiteWatts 60Protection IP67

Scandvik Led Solar Powered Dock Light - 41750P - 390-41750Pf1

This Dock Light uses solar power to charge the battery during the daytime and turns on automatically at night. The number of hours the dock light illuminates depends on your geographical location, weather conditions and season. Mount lights 6' apart. LED Beam Angle: 30°. Includes SS wood screws.Solar Battery: 2 VDC / 0.4WCharge Battery: NI-MH AAA 650mAH 1.2 VDCOperating Temperature: -4° F ~ 122° FProtection: IP68

Scandvik Led Spreader Light, White - 41342P - 390-41342P Superseded By: 390-41440Pf1

The 4x3 Watt LED spreader light is available in 2 designs. Powdercoated aluminum and comes N/A stainless steel bracket.Four 3 Watt LED with 50000 hours of lifetimeEquivalent to a 40-50 Watt halogen bulbDaylight white LED color8-30V DC, low power consumption

Scandvik Led Spreader Light, White - 41343P - 390-41343Pf1

The 4x3 Watt LED spreader light is available in 2 designs. Newly redesigned and made from anodised aluminum with a clip over composite frame fits same hole as previous version. Four 3 Watt LED with 50000 hours of lifetimeEquivalent to a 40-50 Watt halogen bulbDaylight white LED color8-30V DC, low power consumption

Scandvik Rgb Led Flex Strip Light Kit - 41535 - 390-41535F1

Scandvik's all-inclusive RGB LED Flex-Strip kit has everything it takes to custom make a multi-color lighting system for your boat. Quick connect wiring simplifies installations. Y-harnesses and extensions provide a multitude of layout solutions. Flex-Strips can be cut when shorter lengths are needed.Includes (2)16' Reels of RGB flexible LED strips, (2) RGB 20' extension cables, and 2 RGB Y connectors, Wireless remote control, RGB controller with RF wireless remotes, Installation & controller manual.

Scandvik Touch View Battery Charger Controller - 99520 - 390-99520F1

The Touch View controller is installed in the front of the case on Dolphin Pro-Touch Series Battery Chargers. The Touch View controller can also be installed at another location giving remote Battery Charger Information and control. Compatible with Dolphin-Pro Series Battery Chargers. Supplied with a 9' cable. Settings can be made for: Charger standby mode, choice of 5 languages, choice of background color, and choice of maximum power supplied (30%, 50%, 70%, 100%) 2-year warranty.The Touch View will display: Charging phase (Boost, Absorption, Float)Charge voltage and amperageCharger battery temperatureError signalsDisplay of selected charging curveHelp Menu

Scanstrip Led Light - 390-41346P - 390-41346Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations. USCG Certified Ignition Protected (SAE J1711).

Scanstrip Led Light - 390-41353P - 390-41353Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrip Led Light - 41347P - 390-41347Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations. USCG Certified Ignition Protected (SAE J1711).

Scanstrip Led Light - 41348P - 390-41348Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrip Led Light - 41349P - 390-41349Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrip Led Light - 41350P - 390-41350Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations. USCG Certified Ignition Protected (SAE J1711).

Scanstrip Led Light - 41354P - 390-41354Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrip Led Light - 41357P - 390-41357Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrip Led Light - 41358P - 390-41358Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrip Led Light - 41359P - 390-41359Pf1

Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations.

Scanstrut Aptlb01 Central Navlight Bar, White - Apt-Lb-01 - 922-Aptlb01F1

Optional GPS/VHF Antenna Bar for some PowerTower mounts. Fabricated with 6082 Aluminum and finished with a polyester powder coat for a durable, white gloss finish.

Scanstrut Aptlb01Blk Central Navlight Bar, Black - Apt-Lb-01-Blk - 922-Aptlb01Blkf1

Optional GPS/VHF Antenna Bar for some PowerTower mounts. Fabricated with 6082 Aluminum and finished with a polyester powder coat for a durable black finish.

Scanstrut Aptlbgps201 Central Gps/Vhf Antenna(X2) & Navlight Bar, White - Apt-Lb-Gps2-01 - 922-Aptlbgps201F1

Optional GPS/VHF Antenna Bar for some PowerTower mounts. Fabricated with 6082 Aluminum and finished with a polyester powder coat for a durable, white gloss finish.

Scanstrut Cable Junction Box W/10 Fast-Fit Terminals - Sb-8-10 - 922-Sb810F1

This 'Fit & Forget' range is the perfect sailing accessory for anyone planning boat maintenance; provides a secure, IP66 watertight connection for all marine electrical cables. Fit directly to a chosen surface. A mounting bracket is included to allow easy removal for inspection.

Scanstrut Cable Junction Box W/5 Screw Terminals - Sb-8-5 - 922-Sb85F1

This 'Fit & Forget' range is the perfect sailing accessory for anyone planning boat maintenance; provides a secure, IP66 watertight connection for all marine electrical cables. Fit directly to a chosen surface. A mounting bracket is included to allow easy removal for inspection.

Scanstrut Rls508403 Rokk Mini Mount - Tablet Clamp Kit, Cable Tie Rail Mount - Rls-508-403 - 922-Rls508403F1

The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount

Scanstrut Rls509403 Rokk Mini Mount - Cell Phone Clamp Kit, Cable Tie Rail Mount - - 922-Rls509403F1

The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount

Scanstrut Rokk Charge+ Waterproof Dual Usb Charge Socket - Sc-Usb-02 - 922-Scusb02F1

The ultimate rapid charge waterproof USB charger with dual socket connectivity that can charge devices up to 3x faster than standard USB sockets. Featuring an ultra low profile, that's perfect for any outdoor application. Universal fit for any USB Type-A connectorCharge up to 2 devices at a timeClick & Lock LidOutput current 4.2A (total)IPX6 waterproof with cover closedUp to 3x faster than standard USB socketsWaterproof with 1, 2 and even no cables plugged inAnti-corrosion coating on circuit boardUV resistant316 stainless hinge and spring

Scanstrut Rokk Mini Cable Tie Mount Only - Rls-403 - 922-Rls403F1

ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.

Scanstrut Sccw01F Rokk Waterproof Wireless 10W Charger, Hidden Mount - Sc-Cw-01F - 922-Sccw01Ff1

The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. These 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Hidden Mt: Sub-surface, hidden from view. Pocket or bond install. Ideal for GRP or wood.

Scanstrut Sccw02F Rokk Waterproof Wireless 10W Charger, Surface Mount - Sc-Cw-02F - 922-Sccw02Ff1

The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. These 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Surface Mt: Low-profile, flush-mounted charge pad. Ultra grippy, non-slip surface. Designed to fit to any smooth surface. Contemporary look two-tone color.

Scanstrut Sccw04E Rokk Waterproof Wireless Active Phone 5W Charging Mount - Sc-Cw-04E - 922-Sccw04E Superseded By: 922-Sccw04Gf1

Securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone in reach, fully charged and ready to go. Perfect for boat consoles, RVs or any vehicle working inside or outside in the elements, the simple one-handed operation allows you to easily dock your phone and instantly start charging. No connection needed. The high-grip, self-aligning jaws ensure your phone is held tightly and in the optimum charging position every time. Featuring Qi-certified wireless charging technology and a 'smart' LED that indicates when your phone is charging. Throw in foreign object detection and thermal cut-off and you're guaranteed safe, reliable charging in all environments. Compatible with wireless charging enabled phones of all sizes from all major brands including Samsung, Apple and many more. Charging is also possible through non-metallic, waterproof cases. 12/24 VDC.

Scanstrut Sccw04F Rokk Active Waterproof Wireless Phone 10W Charging Mount - Sc-Cw-04F - 922-Sccw04F Superseded By: 922-Sccw04Gf1

Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Perfect for boat consoles or any vehicle working outside in the elements, the simple one-handed operation allows you to easily dock your phone and instantly start charging. No connection needed. The Active 10W securely holds and wirelessly charges your phone. Four screws secure the unit onto any flat surface for simple installation. The high-grip, self-aligning jaws ensure your phone is held tightly and in the optimum charging position every time. 10W Fast ChargingIPX6 WaterproofQi CertifiedMount & chargeHigh friction gripSingle-handed docking

Scanstrut Sccw07F Rokk Wireless Sub 10W Charger - Sc-Cw-07F - 922-Sccw07Ff1

12V/24V Waterproof Wireless Integrated Charging. Sub is designed to seamlessly integrate into your interior or exterior design. Engineered to bond to underneath & wirelessly charge through all non-metallic materials; GRP, fabric, leather, wood, carbon fibre and all leading marine traction products,e.g SeaDek, MarineMat. 10W Fast ChargingIPX6 Waterproof. Qi CertifiedPlace your phone on top to start wirelessly chargingDesigned to seamlessly integrate intoyour interior or exterior design

Scanstrut Sccw08F Catch Waterproof Wireless 10W Charging Mat - Sc-Cw-08F - 922-Sccw08Ff1

ROKK Wireless © Catch 10W safely holds & wirelessly charges your phone at the same time. Now you can keep your phone in a safe place on board, insight, charged and ready to go! Simple Install. One easy cut (65mm 2.5" hole saw) into your chosen mounting location, then simply peel off the 3M self-adhesive backing paper and firmly press down. Connect to a 12/24V power source and you're ready to Catch. Charge. Connect. 12/24V input compatibleIPX6 WaterproofQi-certified wireless chargingCompatible with a wide range of device sizes from Apple, Samsung and many more

Scanstrut Sccw10F Rokk Wireless Cove 10W Charger W/Rgb Led Lighting - Sc-Cw-10F - 922-Sccw10F Superseded By: 922-Sccw10Gtf1

The Cove 10W safely houses & wirelessly charges your phone at the same time. IPX6 waterproof 12/24V Qi certified waterproof wireless charging range for the outdoor environment, without the need for phone charging cables. Simply slide your phone into the pocket and instantly start charging. Cove's front panel passive air vents keep your phone cooler longer. Perfect for integration into consoles, bulkheads, seating, cabinetry and more! 8.6" w x 5" H outside dimensions.Features waterproof LED RGB lights, allowing you to link in with any RGB control system to seamlessly match your lighting around the boat. Fully dimmable. Perfect to match your speakers, deck and underwater lighting.

Scanstrut Sccw12F Aura 10W Wireless Mag Charger, 10W Sc-Cw-12F, 12/24V - Sc-Cw-12F - 922-Sccw12Ff1

Aura 10W. Designed to withstand the toughest conditions, this device not only wirelessly charges your phone but also securely holds it in place.Thanks to our Mag technology, your Apple iPhone will effortlessly magnetically lock into the optimal charging location. Plus, the front spring-loaded locking grip ensures your phone remains in place even during rough rides, keeping it fully charged and within reach at all times. Designed to be installed below marine foam products, or using the optional top-mount bezel for installation on the top of the mounting surface.

Scanstrut Scusb03 Usb-A C Charging Socket - Sc-Usb-03 - 922-Scusb03F1

Ideal for charging modern laptops via the USB-C port. It's also twice as fast for larger tablets, to easily charge an iPad Pro and iPhone simultaneously. A sleek, ultra-compact design with a click-and-lock lid allowing the USB to remain waterproof while in use. Premium, marine-grade materials, it is IPX6 waterproof making it completely wash-down ready.

Scanstrut Scusbf1 Flip Pro Ultra-Fast Usb Charging Port - Sc-Usb-F1 - 922-Scusbf1F1

Flip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard. When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in. Featuring a super-compact footprint, Flip Pro is constructed from premium, marine-grade materials and is IPX4 waterproof, making it completely washdown-ready. Flip Pro is FAST! It will charge at up to 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. it's also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices. Universal fit for any USB-A or USB-C connectorsFast charge (60W max) up to 2 devices at a timeEasy Install, using standard USB mounting hole - 29mm (1-1/8")IPX4 waterproof with the cover closedInternal anti-corrosion protective coatingUV resistant316 stainless hinge and springInput voltage: 10-30V DC (12/24V System)Input current Max: 6A (10A fuse recommended)Standby power draw: 0.01WYES USB - C output:60W max on 24V system36W max on 12V system USB - A output:36W max

Scanstrut Scusbf3 Flip Pro Max Usb Charger - Sc-Usb-F3 - 922-Scusbf3F1

Flip Pro Max is designed for use with either a 12V or 24V input and features 2x 60W USB-C charging ports. This provides the fastest charging for your devices onboard.When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in.Featuring a super-compact footprint, Flip Pro Max is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready.Flip Pro Max is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones and any other USB-C powered devices onboard. Universal fit for any USB-C connectorsFast charge (60W max) up to 2 devices at a timeSupplied with a front-fit bezel kitEasy Install using standard USB mounting hole 1-1/8"Marine Ready UV resistant with internal anti-corrosion protective coating and SS Hinge and springIPX4 waterproof with the cover closed.12V/24V

Scanstrut Scusbf4 Flip Pro Max Usb Charger, Sc-Usb-F3 Usb-C & Usb-A - Sc-Usb-F4 - 922-Scusbf4F1

Flip Pro Max is designed for use with either a 12V or 24V input and features 2x USB charging ports for maximum performance. USB-C connectorsFast charge (60W max on 24V 36W max on 12V) up to 2 devices at a timeSupplied with a front-fit bezel kitEasy Install using standard USB mounting hole 1-1/8"Marine Ready UV resistant with internal anti-corrosion protective coating and SS Hinge and springIPX4 waterproof with the cover closed.

Scanstrut Waterproof Dual Usb Charge Socket - Sc-Usb-01 - 922-Scusb01F1

Waterproof charging for your devices onboard; whatever the weather. The socket will work with any USB Type-A connector to charge up to 2 devices at a time. Compatible with phones, tablets, fish finders and chartplotters. Works with any USB Type-A connector to charge up to 2 devices at a time. Compatible with phones, tablets, fish finders and chartplotters.Approved IPX4 waterproof rating with the cover closed and waterproof with 1, 2 or even 0 cables pluggedEasy to install with a low profile and small mounting footprint, the socket can be both opened and closed with easeStandard barrel size fits existing USB sockets

Scepter 004933 Manual Vent Military Style Water Jerry Can W/Crc, 5.3 Gal./20L, Light Blue - 4933 - 770-004933F1

Manufactured from high-density, unbreakable polyethylene. All sizes easily attach to the patented Flo n' Go™ hand pump. Includes CRC (Child Resistant Cap).

Scotchlok 314 Electrical Connector - 7100370157 - 71-09230F1

Contains a special compound inside connector to protect against corrosion in damp conditions. Handles 22-14 AWG solid or stranded wire. Wires held with double "U" element to provide much stronger connection while reducing electrical resistance.

Scotty 1000K Replacement Wire 200' W/Terminal Kit, 6/Case - 1000K - 736-1000Kf1

150 pound test with terminal fastening kit.

Scotty 1000S Replacement Wire, 200', 6/Case - 1000 - 736-1000Sf1

150 pound test.

Scotty 1001K Replacement Wire 300' W/Terminal Kit, 6/Case - 1001K - 736-1001Kf1

150 pound test with terminal fastening kit.

Scotty 1001S Replacement Wire, 200', 6/Case - 1001S - 736-1001Sf1

150 pound test.

Scotty 1002K Replacement Wire 400' W/Terminal Kit, 6/Case - 1002K - 736-1002Kf1

150 pound test with terminal fastening kit.

Scotty 1004 Wire Connector Sleeves (10Pk) - 1004 - 736-1004F1

#1004 includes: 10 Sleeves for joining wire line or for locating line releases.

Scotty 1011 Double Line Connector Sleeves, 12Ea 10 Packs/Case - 1011 - 736-1011F1

Double black brass sleeves for joining wire or heavy monofilament line.

Scotty 1133 12 Guage 2 Conductor Power Wire 12' - 1133 - 736-1133F1

12 Guage 2 conductor power wire 12'

Scotty 1157 Wire Connector Sleeve & Thimble Kit - 1157 - 736-1157F1

#1157 Thimble Kit includes: Two stainless steel thimbles and 4 brass connector sleeves.

Scotty 2404 Heavy Duty Connector Sleeves, 12Ea 10 Packs/Case - 2404 - 736-2404Sf1

10 Heavy Duty Brass Connector Sleeves For use with the Scotty High Performance 180 lb. test cable

Scotty Led Sea-Light W/Suction Cup - 835 - 736-835F1

W/Suction Cup: A non-permanent safety addition that is perfectly portable for kayaks and small watercraft. Designed to meet the demands of the sea but also ideal for within a vehicle, for camping and whenever a reliable high efficient light is needed. Includes versatile suction cup mount for use in both salt and fresh water. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours

Scotty Led Sea-Light W/Suction Cup - 835 - 736-835Sf1

W/Suction Cup: A non-permanent safety addition that is perfectly portable for kayaks and small watercraft. Designed to meet the demands of the sea but also ideal for within a vehicle, for camping and whenever a reliable high efficient light is needed. Includes versatile suction cup mount for use in both salt and fresh water. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours

Scotty Led Sea-Light, 41" High W/Fold Down Pole - 838 - 736-838F1

W/Fold Down Pole: The corrosion proof construction of this system provides a long service life in both fresh and salt water applications as it is designed with stainless steel fasteners and a 1/2" stainless fold down pole. 41" Tall. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours

Screw F/Breaker 632X1/4 6/Pk - 8035-Bss - 661-8035F1

Sea Dog 4429441 Led G4 Bulb - 442944-1 - 354-4429441F1

G4 Lamps feature 14 low amp draw LEDs that produce 60 lumens. A direct drop-in replacement for halogen bulbs with a 2-Pin GU4 base. Direct 120° illumination with no wasted light. 12VDC. LED G4 bulb is designed for interior use only.

Sea Hawk 1284Glkit Tuff Stuff 2 Gallon Kit, Light Gray - 1284Glkit - 95-1284Glkitf1

A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.

Sea Hawk 1284Qtkit Tuff Stuff 1/2 Gallon Kit, Light Gray - 1284Qtkit - 95-1284Qtkitf1

A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.

Sea-Dog 1591031 Wire Rope Clamp, 1/8" - 159103-1 - 354-1591031F1

Zinc plated cast steel.

Sea-Dog 1591051 Wire Rope Clamp, 3/16" - 159105-1 - 354-1591051F1

Zinc plated cast steel.

Sea-Dog 1591061 Wire Rope Clamp, 1/4" - 159106-1 - 354-1591061F1

Zinc plated cast steel.

Sea-Dog 1595021 Stainless Wire Rope Clip, 2 Mm Wire Size - 159502-1 - 354-1595021F1

Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.

Sea-Dog 1595041 Stainless Wire Rope Clip, 4 Mm Wire Size - 159504-1 - 354-1595041F1

Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.

Sea-Dog 1595051 Stainless Wire Rope Clip, 5 Mm Wire Size - 159505-1 - 354-1595051F1

Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.

Sea-Dog 1595061 Stainless Wire Rope Clip, 6 Mm Wire Size - 159506-1 - 354-1595061F1

Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.

Sea-Dog 1595081 Stainless Wire Rope Clip, 8 Mm Wire Size - 159508-1 - 354-1595081F1

Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.

Sea-Dog 159510 Stainless Wire Rope Clip, 10 Mm Wire Size - 159510-1 - 354-1595101F1

Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.

Sea-Dog 171206 Stainless Steel Light Thimble, 1/4" - 171206 - 354-171206F1

Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.

Sea-Dog 171208 Stainless Steel Light Thimble, 5/16" - 171208 - 354-171208F1

Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.

Sea-Dog 171210 Stainless Steel Light Thimble, 3/8" - 171210 - 354-171210F1

Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.

Sea-Dog 171212 Stainless Steel Light Thimble, 1/2" - 171212 - 354-171212F1

Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.

Sea-Dog 171216 Stainless Steel Light Thimble, 5/8" - 171216 - 354-171216F1

Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.

Sea-Dog 2019141 Semi-Concealed Stainless Hinges, Pr. - 201914-1 - 354-2019141F1

Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. All hinges require #6 RH screws.

Sea-Dog 2019161 Semi-Concealed Stainless Hinges, Pr. - 201916-1 - 354-2019161F1

Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. All hinges require #6 RH screws.

Sea-Dog 2019541 Flush Mount Concealed Hinge, Stainless, 2/Pk - 201954-1 - 354-2019541F1

Flush mount concealed hinges are constructed of corrosion resistant 304 stainless steel. Designed to keep the hinge out of sight when the door is closed. Installs with five #6 FH fasteners (not included).

Sea-Dog 2019641 Soft Close Concealed Stainless Steel Cabinet Hinge - 201964-1 - 354-2019641F1

This Soft Close Concealed Hinge is designed to keep the hinge out of sight when the door is closed. Silent and smooth closure. Constructed of corrosion resistant stamped 304 stainless steel. Installs with four #8 FH fasteners (not included).

Sea-Dog 2733001 Tube Connector, 7/8" Black Pr. - 273300-1 - 354-2733001F1

Tube connectors are used for connecting the ends of stainless steel or aluminum tubing. Constructed of injection molded nylon they slide inside the tube. *Stainless tube wall thickness .049".

Sea-Dog 3-Position Two Circuit Switch - 420400-1 - 354-4204001F1

Stamped brass. When pushed in all the way, the switch is turned off. When pulled to the first stop, the first circuit is activated. At the second stop the first circuit is deactivated and the second circuit is activated. 15 amps. 3/8" x 1" Shaft.

Sea-Dog 321422 Gas Filled Lift Spring - 321422-1 - 354-3214221F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 321424 Gas Filled Lift Spring - 321424-1 - 354-3214241F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214621 Gas Filled Lift Spring - 321462-1 - 354-3214621F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214631 Gas Filled Lift Spring - 321463-1 - 354-3214631F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214661 Gas Filled Lift Spring - 321466-1 - 354-3214661F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214731 Gas Filled Lift Spring - 321473-1 - 354-3214731F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214741 Gas Filled Lift Spring - 321474-1 - 354-3214741F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 321476 Gas Filled Lift Spring - 321476-1 - 354-3214761F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 321482 Gas Filled Lift Spring - 321482-1 - 354-3214821F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214831 Gas Filled Lift Spring - 321483-1 - 354-3214831F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214841 Gas Filled Lift Spring - 321484-1 - 354-3214841F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3214861 Gas Filled Lift Spring - 321486-1 - 354-3214861F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 321488 Gas Filled Lift Spring - 321488-1 - 354-3214881F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 321492 Gas Filled Lift Spring - 321492-1 - 354-3214921F1

Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.

Sea-Dog 3299001 Pl-259 Male Uhf Coax Connector - 329900-1 - 354-3299001F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299011 Pl-259/Ug175U Male Uhf Coax Connector - 329901-1 - 354-3299011F1

Nickel plated brass fittings for coaxial cable installation applications.