Select Category
Electrical
Sea-Dog 3299021 Pl-259/Ug176U Male Uhf Coax Connector - 329902-1 - 354-3299021F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299501 Pl-258 Double Female In-Line Uhf Coax Connector - 329950-1 - 354-3299501F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299511 Double Female Bulkhead Uhf Coax Connector - 329951-1 - 354-3299511F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299551 Right Angle Uhf Coax Connector - 329955-1 - 354-3299551F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 3299701 Cap & Chain For Uhf Coax Connector - 329970-1 - 354-3299701F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 4000051 Combination Bow Light, 12V - 400005-1 - 354-4000051F1
Injection molded polycarbonate/stamped stainless steel. Note: Not for new construction, for replacement of existing lighting.
Sea-Dog 4000101 Led Fixed Mount All Around Light, 4" - 400010-1 - 354-4000101F1
LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 400015 Led Removable All Around Light, 18" - 400015-1 - 354-4000151F1
Approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Low amp draw. Requires three #8 FH fasteners (not included).
Sea-Dog 4000701 Led Side Mount Lights, , A:3-7/8", B:2-1/4", C:1-7/8", 12V, Stainless - 400070-1 - 354-4000701F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000711 Led Side Mount Lights, White, 1 Pr. - 400071-1 - 354-4000711F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000731 Led Side Mount Lights, Black, 1 Pr. - 400073-1 - 354-4000731F1
LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Sea-Dog 4000801 Led Flush Mount Side Lights, Stainless, 1 Pr. - 400080-1 - 354-4000801F1
One pair includes Port and Starboard lights. Direct replacement for the 400180. LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile).
Sea-Dog 4001101 Fold Down All Around Light, 26" - 400110-1 - 354-4001101F1
Injection Molded Nylon/Aluminum with a white translucent lens. Folds down easily for storage.
Sea-Dog 400135 Transom Light - Round - 400135-1 - 354-4001351F1
Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001361 Transom Light - Rectangular - 400136-1 - 354-4001361F1
This Rectangular Transom Light is for replacement of existing lighting (not for new construction). Constructed of corrosion resistant stamped 304 stainless steel. Installs with two #10 FH fasteners (not included). These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997.
Sea-Dog 400140 All Around Light - 400140-1 - 354-4001401F1
Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.
Sea-Dog 400170 Side Mount Lights, Stainless, 1 Pr. - 400170-1 - 354-4001701F1
Stamped 304 Stainless Steel. One pair includes Port and Starboard lights. Not for new construction, for replacement of existing lighting.
Sea-Dog 4001981 Led Dome Light, 5-1/2", Brass, 12V - 400198-1 - 354-4001981F1
Stamped polished brass, lacquer coated to prevent tarnish. With the low current consumption of .068 amps at 12 volts they give off very little heat and have extremely long service life. Vibration resistant, these LED dome lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included). Prewired with integral side mounted on/off toggle switch.
Sea-Dog 4018403 Led Square Mirror Light With Dimmer - 401840-3 - 354-4018403F1
This LED Square Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. 3000K warm white, 24 Osram LEDs, 1000 lumens @ 6W. Includes #6 FH fasteners and white hole plugs. CE, RoHS compliant. 5/16" deep.
Sea-Dog 4030611 12/24V Led Continuous Adjustment Memory Function Dimmer Switch W/O On-Off Function - 403061-1 - 354-4030611F1
This LED Continuous Adjustment Dimmer Without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When powered, the LED ring is dark blue; when adjusting towards maximum brightness, the ring becomes lighter blue; when adjusting towards minimum brightness, the ring becomes darker blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating.
Sea-Dog 4030631 Led Push Button On/Off Switch - 403063-1 - 354-4030631F1
LED Push Button On/Off Switch is constructed of formed 304 stainless steel. Prewired for ease of installation. Typically wired so LED ring lights up blue when circuit is energized by pushing the center button. IP65 rating.
Sea-Dog 4030641 Led Push Button On/Off Switch - High Amp - 403064-1 - 354-4030641F1
This High Amp LED Push Button On/Off Switch lights up blue when pushing the center button, energizing the circuit. Installs easily. Wired with three spade terminals. Constructed of corrosion resistant formed 304 stainless steel. IP67 rating.
Sea-Dog 4030651 Led Push Button On/Off Switch - 403065-1 - 354-4030651F1
LED Push Button On/Off Switch is prewired for easy installation. Typically wired so LED ring lights up blue when pushing the center button, energizing the circuit. Push button constructed of aluminum with clear water resistant nylon boot. IP66 rating.
Sea-Dog 4042303 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Clear Lens - 404230-3 - 354-4042303F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Stylish stainless steel finish to compliment any interior. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 404232 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Frosted Lens - 404232-3 - 354-4042323F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 404330 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Clear Lens - 404330-3 - 354-4043303F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 4043323 Led Spring Mount 12V Overhead Light, Stainless Bezel W/Frosted Lens - 404332-3 - 354-4043323F1
Excellent LED light dispersion and brightness, ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. Stylish stainless steel finish to compliment any interior. Recessed to provide a sleek appearance. G4 LED bulb features 14 white LEDs producing 60 lumens, 60 mA, 0.7W @ 12.8VDC.
Sea-Dog 4049393 Led Flex-Neck Day/Night Light With Usb - 404939-3 - 354-4049393F1
LED Flex-Neck Day/Night Light with USB is great for chart lighting or can be used as a reading, cabin, or berth light. Features 21 white LEDs and 3 red LEDs for night vision with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between red, white, and off. Continue to touch button to activate dimmer. 3000K Bridgelux bulbs @ 3W. USB Port: 5V/2A. Constructed of rubber coated plastic. Installs with two #6 FH fasteners (included). CE, RoHS certified.
Sea-Dog 4053003 Led Rechargeable Handheld Flood Light, 12/120V - 405300-3 - 354-4053003F1
The flood light is fully adjustable, the handle allows the light to be hung or propped at many different angles to illuminate the task at hand. Includes both a 12 VDC and 120 VAC charge adapter. Constructed of a black powder coated aluminum housing with a stamped 304 stainless steel bracket and polycarbonate lens. Run time 3-4 hours.
Sea-Dog 4053203 Led Cockpit Spreader Light, 12/24V, Black - 405320-3 - 354-4053203F1
These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Low amp draw, 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.
Sea-Dog 4053213 Led Cockpit Spreader Light, 12/24V, White - 405321-3 - 354-4053213F1
These marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Low amp draw, 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant.
Sea-Dog 4053603 Led Undermount Light Bar, 5" - 405360-3 - 354-4053603F1
LED Undermount Light Bar has 45° tilt. Osram LEDs provides for 1,200 lumens @ 15W. Constructed of powder coated die cast aluminum with a durable polycarbonate lens. IP67 rating. CE, RoHS compliant.
Sea-Dog 4053643 Led Undermount Light Bar, 10" - 405364-3 - 354-4053643F1
LED Undermount Light Bar has 45° tilt. Osram LEDs provides for 3,200 lumens @ 40W. Constructed of powder coated die cast aluminum with a durable polycarbonate lens. IP67 rating. CE, RoHS compliant.
Sea-Dog 415044 Battery Tray With Strap, Group 24 - 415044-1 - 354-4150441F1
Injection Molded Polypropylene.
Sea-Dog 4150471 Battery Tray With Strap, Group 24 - 415047-1 - 354-4150471F1
Injection Molded Polypropylene.
Sea-Dog 415054 Battery Tray, Group 24 - 415054-1 - 354-4150541F1
Injection Molded Polypropylene.
Sea-Dog 415057 Battery Tray, Group 27 - 415057-1 - 354-4150571F1
Injection Molded Polypropylene.
Sea-Dog 4152101 Battery Terminals, Positive & Negative Set - 415210-1 - 354-4152101F1
Wing nut style battery terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead.
Sea-Dog 415211 Battery Terminal, Negative - 415211-1 - 354-4152111F1
Wing nut style battery terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead.
Sea-Dog 4216181 Led Round Temperature Meter - 421618-1 - 354-4216181F1
Temperature Meter includes a prewired temperature sensor with a 6' cable. Monitors temperature on a bright LED screen. Reverse polarity protected. Same compact round size as a standard 12 VDC receptacle, this Temperature Meter supports many installation options. Constructed of injection molded nylon. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. 12-24 VDC. IP67 waterproof rating.
Sea-Dog 4227321 Mini Battery Switch W/Removable Knob - 422732-1 - 354-4227321F1
These Mini Battery Switches feature a removable knob for extra security. To remove, simply twist the cap to the out position and pull. Mini footprint makes it ideal for close quarters. Rated at 100A continuous and 150A cranking amps. Constructed of machined brass and injection molded nylon.
Sea-Dog 4227661 Heavy Duty Off/On Battery Switch - 422766-1 - 354-4227661F1
This Heavy Duty Battery selector switch has 380A continuous and 2000A cranking amps, giving it the power to start a large single or dual diesel engines. Can be surface or rear panel mounted. Ignition protected. Safe for installation on gasoline powered boats. Constructed of injection molded nylon with machined brass contacts. Installs with four #10 RH fasteners (not included).
Sea-Dog 4227681 Heavy Duty Off/1/Both/2 Battery Switch - 422768-1 - 354-4227681F1
This Heavy Duty Battery selector switch has 380A continuous and 2000A cranking amps, giving it the power to start a large single or dual diesel engines. Can be surface or rear panel mounted. Ignition protected. Safe for installation on gasoline powered boats. Constructed of injection molded nylon with machined brass contacts. Installs with four #10 RH fasteners (not included).
Sea-Dog 4227901 Smart Dual Battery Isolator, 12V - 422790-1 - 354-4227901F1
This Smart Dual Battery Isolator is ideal for dual battery applications. Allows two batteries to automatically charge at the same time and then isolates the batteries, ensuring the starting battery is always charged and ready for use. Automatically engages or disengages the circuit at pre-set voltages by sensing the input voltage generated, eliminating the possibility of discharging the primary starting battery. Cut-in voltage: 13.3V. Cut-out voltage: 12.8V. Surge protected. Features an LED indicator to alert the user when the unit is engaged. Constructed of machined brass with a weatherproof injection molded nylon housing and durable silver tipped contacts. Installs with two #8 RH fasteners (included). IP65 rating.
Sea-Dog 4230331 Bilge Pump Water Alarm Panel - 423033-1 - 354-4230331F1
The Bilge Water Alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump float switch level. Bilge pump should be hooked up to a switch. Rated 15 Amps. Cutout: 1-3/4" x 2-1/2".
Sea-Dog 4230461 Splash Guard Bilge Pump Panel With Circuit Breaker - 423046-1 - 354-4230461F1
Injection molded ABS for maximum durability and corrosion resistance. Additional splash guard makes this ideal for applications where the panel front might be subjected to light spray and water. Features a three-way switch allowing both automatic and manual switching of the bilge pump. When operated in the Manual mode, a red LED light is activated, when in the Automatic mode, a green LED light is activated. A convenient back lit feature allows the words Bilge Pump" to illuminate facilitating easy location and operation. Bilge pump switch panel includes a UL listed 20 amp circuit breaker allowing quick and easy resetting of the system.
Sea-Dog 4240101 4-Gang Vertical Rocker Switch Fuse Panel - 424010-1 - 354-4240101F1
Vertical 4-Gang Rocker Switch Panel is constructed of fire resistant injection molded nylon. These panels are suitable for use in engine room compartments. Features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4" x 1-1/4" glass style fuses. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with four #6 RH fasteners (not included). Meets CE specifications.
Sea-Dog 4241101 6-Gang Vertical Rocker Switch Fuse Panel - 424110-1 - 354-4241101F1
Vertical 6-Gang Rocker Switch Panel is constructed of fire resistant injection molded nylon. These panels are suitable for use in engine room compartments. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six fuse holders for use with standard AGC 1/4" x 1-1/4" glass style fuses. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included). Meets CE specifications.
Sea-Dog 4242101 Horizontal 6-Gang Rocker Switch Panel - 424210-1 - 354-4242101F1
Aluminum Horizontal Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
Sea-Dog 4248001 6-Gang Vertical Rocker Switch Breaker Panel - 424800-1 - 354-4248001F1
Fire resistant injection molded nylon w/6 illuminating switches. The Vertical 6-Gang Breaker Rocker Switch Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Additional sizes available. Individual circuit 10A max. 37A total. These fire resistant panels are suitable for use in engine room compartments. Includes a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). CE compliant. 12 VDC.
Sea-Dog 425020 Wave Led Battery Test Rocker Switch Panel - 425020-1 - 354-4250201F1
The Wave LED Battery Test Rocker Switch Panel includes an illuminating rocker SPDT switch and bright LED display to monitor voltage of two batteries.
Sea-Dog 4261621 Polarized Molded Electrical Connector, 2-Pin - 426162-1 - 354-4261621F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 4261631 Polarized Molded Electrical Connector, 3-Pin - 426163-1 - 354-4261631F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 4261641 Polarized Molded Electrical Connector, 4-Pin - 426164-1 - 354-4261641F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 426503 Double Usb Power Socket W/O Light - 426503 - 354-426503F1
This Double USB Power Socket has no LED indicator light so it will not drain the battery when not in use. Capable of charging two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon with terminal spade contacts. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires.
Sea-Dog 4266241 Terminal Block, 4 Gang - 426624-1 - 354-4266241F1
Terminal blocks are modular, insulated screw-type electrical connectors that are used to secure and/or terminate two or more wires together. Useful for connecting wiring to a ground or for connecting electrical switches and outlets to the mains. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate preventing loosening and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with four RH fasteners (not included).
Sea-Dog 4266261 Terminal Block, 6 Gang - 426626-1 - 354-4266261F1
Terminal blocks are modular, insulated screw-type electrical connectors that are used to secure and/or terminate two or more wires together. Useful for connecting wiring to a ground or for connecting electrical switches and outlets to the mains. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate preventing loosening and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with four RH fasteners (not included).
Sea-Dog 4267221 Buss Bar 10 Screw Terminal Block, 6" - 426722-1 - 354-4267221F1
Buss Bar Screw-Temrinal Blocks are each equipped with a two 1/4" studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included). 426722 has certification by ISO, ABYC, SAE, USCG, and CE low voltage directive standards.
Sea-Dog 4267241 Buss Bar 20 Screw Terminal Block, 9-1/8" - 426724-1 - 354-4267241F1
Buss Bar Screw-Temrinal Blocks are each equipped with a two 1/4" studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included).
Sea-Dog 426733 Buss Bar 12 Screw Terminal Block, 7-15/16" - 426733-1 - 354-4267331F1
Buss Bar Screw-Temrinal Blocks are each equipped with a two 5/16" studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included).
Sea-Dog 4299401 Multi-Function Wire Stripper & Crimper - 429940-1 - 354-4299401F1
This professional grade Multi-Function Wire Stripper & Crimper tool is three tools in one. It strips, crimps, and cuts 24-10 gauge wire with ease. Constructed of powder coated steel.
Sea-Dog 4440501 Agc Glass Tube Fuse, 50 Amp, 5/Card - 444050-1 - 354-4440501F1
Nickel plated brass contacts.
Sea-Dog 4441011 Agc Glass Tube Fuse, 1 Amp, 5/Card - 444101-1 - 354-4441011F1
Nickel plated brass contacts.
Sea-Dog 4441021 Agc Glass Tube Fuse, 2 Amp, 5/Card - 444102-1 - 354-4441021F1
Nickel plated brass contacts.
Sea-Dog 4441031 Agc Glass Tube Fuse, 3 Amp, 5/Card - 444103-1 - 354-4441031F1
Nickel plated brass contacts.
Sea-Dog 4441041 Agc Glass Tube Fuse, 4 Amp, 5/Card - 444104-1 - 354-4441041F1
Nickel plated brass contacts.
Sea-Dog 4441051 Agc Glass Tube Fuse, 5 Amp, 5/Card - 444105-1 - 354-4441051F1
Nickel plated brass contacts.
Sea-Dog 4441101 Agc Glass Tube Fuse, 10 Amp, 5/Card - 444110-1 - 354-4441101F1
Nickel plated brass contacts.
Sea-Dog 4441151 Agc Glass Tube Fuse, 15 Amp, 5/Card - 444115-1 - 354-4441151F1
Nickel plated brass contacts.
Sea-Dog 4441201 Agc Glass Tube Fuse, 20 Amp, 5/Card - 444120-1 - 354-4441201F1
Nickel plated brass contacts.
Sea-Dog 4441251 Agc Glass Tube Fuse, 25 Amp, 5/Card - 444125-1 - 354-4441251F1
Nickel plated brass contacts.
Sea-Dog 4441301 Agc Glass Tube Fuse, 30 Amp, 5/Card - 444130-1 - 354-4441301F1
Nickel plated brass contacts.
Sea-Dog 4441351 Agc Glass Tube Fuse, 35 Amp, 5/Card - 444135-1 - 354-4441351F1
Nickel plated brass contacts.
Sea-Dog 4450071 Atm Mini Fuse, 7.5A 5/Pk - 445007-1 - 354-4450071F1
ATM mini style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices. For use with ATM mini style fuse holder
Sea-Dog 4451011 Ato/Atc Fuse, 1 Amp (Fast), 5/Pk - 445101-1 - 354-4451011F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451021 Ato/Atc Fuse, 2 Amp (Fast), 5/Pk - 445102-1 - 354-4451021F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451031 Ato/Atc Fuse, 3 Amp (Fast), 5/Pk - 445103-1 - 354-4451031F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451041 Ato/Atc Fuse, 4 Amp (Fast), 5/Pk - 445104-1 - 354-4451041F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451071 Ato/Atc Fuse, 7.5 Amp (Fast), 5/Pk - 445107-1 - 354-4451071F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451101 Ato/Atc Fuse, 10 Amp (Fast), 5/Pk - 445110-1 - 354-4451101F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451151 Ato/Atc Fuse, 15 Amp (Fast), 5/Pk - 445115-1 - 354-4451151F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451201 Ato/Atc Fuse, 20 Amp (Fast), 5/Pk - 445120-1 - 354-4451201F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451251 Ato/Atc Fuse, 25 Amp (Fast), 5/Pk - 445125-1 - 354-4451251F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451301 Ato/Atc Fuse, 30 Amp (Fast), 5/Pk - 445130-1 - 354-4451301F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451401 Ato/Atc Fuse, 40 Amp (Fast), 5/Pk - 445140-1 - 354-4451401F1
ATO/ATC style injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices.
Sea-Dog 4451971 Ato/Atc Style Inline Led Fuse Holder - 445197-1 - 354-4451971F1
ATO/ATC Style Inline LED Fuse Holder features an LED indicator which lights up when the fuse is blown. Designed to accept ATO/ATC automotive-style spade terminal fuses. 12 gauge 6" AWM wire lead. Maximum: 30A. IP67 waterproof rating.
Sea-Dog 4451981 Ato/Atc Style Inline Fuse Holder - 445198-1 - 354-4451981F1
ATO/ATC Style Inline Fuse Holder is designed to accept ATO/ATC automotive-style spade terminal fuses. 12 gauge 6" AWM wire lead. Maximum: 30A. IP67 waterproof rating.
Sea-Dog 4452991 Inline Fuse Holder - Maxi - 445299-1 - 354-4452991F1
Injection Molded PVC.
Sea-Dog 5-Gang Wave Rocker Switch Fuse Panel - 425110-1 - 354-4251101F1
The Wave Rocker Switch Fuse Panel is constructed of injection molded nylon. Features five ignition protected, illuminating SPST On/Off rocker switches and five fuse holders for use with standard AGC 1/4" x 1-1/4" standard glass fuses (two 3A, two 5A, one 8A, and one 10A). Individual circuit 10A max. 30A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Label decals are back lit with green LEDs. Installs with six fasteners (not included).
Sea-Dog 560105 Spreader Boot, 3/16" Wire Size, 1 Pr. - 560105-1 - 354-5601051F1
UV protected rubber.
Sea-Dog 5601061 Spreader Boot, 1/4" Wire Size, 1 Pr. - 560106-1 - 354-5601061F1
UV protected rubber.
Sea-Dog 5631521 Multi-Fuction Needle Nose Wire Stripper And Crimper - 563152-1 - 354-5631521F1
This handy multi-tool includes needle nose pliers, cutters, wire strippers and crimper. Corrosion resistant powder coated steel.
Sea-Dog 580143 Angled Oarlock Socket - 580143-1 - 354-5801431F1
Injection Molded Nylon.
Sea-Dog 5808901 Angled Mount Oarlock Socket, Galvanized, 1 Pr. - 580890-1 - 354-5808901F1
Constructed of hot dipped galvanized malleable iron. An economical alternative to stainless or brass.
Sea-Dog 7538771 4-Wire Trailer Connector Set, Male & Female - 753877-1 - 354-7538771F1
Injection Molded PVC.
Sea-Dog Angled 3-Sided Bristle Brush, Yellow - 491081-1 - 354-4910811F1
Angled brush is great for reaching areas below the waterline and overhead hard-to-reach spaces. Fits all Sea-Dog boat hooks, boat pole and all universal/Acme threaded devices. Injected molded nylon.
Sea-Dog Deluxe Led Courtesy Light, Down Lighting, Blue - 401421-1 - 354-4014211F1
Constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. These lights feature 3 low amperage, long life LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9©28VDC. IP67 waterproof rating.
Sea-Dog Led Flush Mount Courtesy Light, Oval, Blue Leds - 401279-1 - 354-4012791F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Led Flush Mount Courtesy Light, Round, Blue Leds - 401274-1 - 354-4012741F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Line 4267101 Screw Terminal Buss Bar, 5 Terminals - 426710-1 - 354-4267101F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
