Select Category
Electrical
Technology Research 90° Angle Adapter, 15A-30A - 95245508 - 802-095245508F1
Adapts 15A to 30A.
Technology Research Hardwire Surge Guard, 50A - 35550 - 802-35550F1
Permanently installed Surge Guard protects your RV bumper to bumper from faulty park power. Protects from the weather and theft and eliminates handling. UL Listed. Automatically shuts off the power when excessive voltage, Low (Less than 102V) and High (Greater than 132V), or open neutral is present. Automatic reset on power restoration. Caution indicator light indicates miswired pedestal, reverse polarity and elevated ground voltage. 128 second reset delay protects A/C compressor. Fits neatly inside RV's electrical compartment. Weather resistant. Joules of surge protection. Easy installation. UL Listed. Optional Remote Power Monitor LCD Display, sold separately. Plugs into remote port on Surge Guard models 34520 and 34560. Conveniently and remotely monitors RV electrical power. Detailed fault screens show 16 information fault screens, incoming line voltages and current being used. Joystick offers easy screen navigation. Stores faults (if any). Plug and Play. Connects to a RJ12 (6 pin) connector cable (included).Not compatible with previous models that do not have a telecon jack.
Technology Research Straight Adapter, 15A-30A - 95215508 - 802-095215508F1
Adapts a 15 Amp male plug to a 30 Amp female.
Technology Research Straight Reverse Adapter, 30A-15A - 95225508 - 802-095225508F1
Adapts 30A male to 15A female.
Tekonsha 7 Way Blade Tester & Emulator W/Led Display - 6562 - 220-6562F1
7-Way Trailer Emulator is used for the proper installation and set-up of a brake control when a trailer is not readily available. Brake control set-up is accomplished using a built-in load module that will simulate electric magnet brakes on a trailer. The emulator will also check electrical continuity of all circuits in the 7-Way blade style connector.
Telescoping Pole Light - 5610-48-7 - 23-5610487F1
Two-mile, 360° visibility, for boats up 65.6 ft. (20m). Stores easily in less space than conventional stern light and can be removed quickly from the any Attwood pole light base. Aluminum pole telescopes from 26" to 42". Includes 12-watt lamp.
Tent Mount Socket Panel Dbl Double Hole - 426028-1 - 354-4260281F1
Tent Mount Socket Panel Sgl Single Hole - 426027-1 - 354-4260271F1
Tent Mount Socket Panel Trp Triple Hole - 426029-1 - 354-4260291F1
Terminal Block - 2404-Bss - 661-2404F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block 8-Gang - Fs40690 - 11-Fs40690F1
Combines negative and positive buses in one block.
Terminal Block Bus Bar 4 Gang - 46206-04-Bx - 12-4620604Bxf1
Terminal Block Ind 10 Cir 20A - 2410-Bss - 661-2410F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 10 Cir 30 - 2510-Bss - 661-2510F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 12 Cir 30A - 2512-Bss - 661-2512F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 2 Cir 30 A - 2502-Bss - 661-2502F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 4 Cir 30A - 2504-Bss - 661-2504F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 6 Cir 20 A - 2406-Bss - 661-2406F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 6 Cir 30 A - 2506-Bss - 661-2506F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 8 Cir 20 A - 2408-Bss - 661-2408F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 8 Cir 30 A - 2508-Bss - 661-2508F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Eye Pin Kit - 301456 - 1-301456F1
Contains terminal eye pin, E-ring, nut and washer.
Terminal Feed Thru 3/8 Sm Black - 2203-Bss - 661-2203F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 3/8 Sm Red - 2204-Bss - 661-2204F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 5/16 Sm Black - 2201-Bss - 661-2201F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 5/16 Sm Red - 2202-Bss - 661-2202F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Kit For Downriggers - 1153 - 736-1153F1
Contains: 1 Coastlock snap with swivel (#1150), 1 stainless steel thimble and 3 sleeves, 1 soft stop bumper.
Th Marine Led Cup Holder Accent Ring, Blue - Led-Smchr-B-Dp - 232-Ledsmchrbdpf1
Converts any cup holder to an LED accent Simple installation - lift cup holder and slide in ringFits cup holders from 3-1/4" - 3-1/2" diaRing contains 18 attractive LEDs
Th Marine Led Rgb Color Changing Flat Rope Light, 20' - Led-Sm20-Rgb-Dp - 232-Ledsm20Rgbdpf1
Create awesome colors and light shows on your boat or trailer with our RGB Color Changing Flat Rope LED Light strips. Unlike other RGB systems, this is marine grade, IP68 waterproof, and fully submersible. Requires an RGB controller for operation. Dazzling Light Show Effects with RGB Color Changing Lights with Many Controller FeaturesIP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillHigh Output, Super Bright, Super Flexible
Th Marine Led32484Dp Mini Underwater Led Light, Rgbw - Led-32484-Dp - 232-Led32484Dpf1
Glass lens Auto-sensing, no controller requiredIP68 Rated2-wire RGB can be wired directly to toggle switch. Full spectrum of colors scroll automatically at start. Simple off/on again pauses on selected color.
Th Marine Led32485Dp Mini Underwater Led Light, Blue - Led-32485-Dp - 232-Led32485Dpf1
Glass lens Auto-sensing, no controller requiredIP68 Rated
Th Marine Led32487Dp Mini Underwater Led Light, Green - Led-32487-Dp - 232-Led32487Dpf1
Glass lens Auto-sensing, no controller requiredIP68 Rated
Th Marine Led5200Dp Led Flex Strip Bow Light Set, Red & Green - Led52000Dp - 232-Led52000Dpf1
Super Bright Ideal for Kayaks and Small Boats for VisibilityNot Tested for USCG Certification
Th Marine Led71000Dp Oval Courtesy Light, White W/White Leds - Led-71000-Dp - 232-Led71000Dpf1
Narrow Beam Pattern 12V DC / 0.2W power consumptionWeatherproof design- IP65
Th Marine Led72000Dp Oval Courtesy Light, White W/Blue Leds - Led-72000-Dp - 232-Led72000Dpf1
Narrow Beam Pattern Narrow Beam Pattern12V DC / 0.2W power consumptionWeatherproof design- IP65
Th Marine Ledrgbcont3Fdp Rgb Led Light Controller, Square - Ledrgbcont3Fdp - 232-Ledrgbcont3Fdpf1
Touch screen technology Illuminated power buttonControls RGBW light color and intensityWater resistant
Th Marine Ledrgbcont4Rdp Rgb Led Light Controller, Round W/Chrome Bezel - Led-Rgbcont-4R-Dp - 232-Ledrgbcont4Rdpf1
Touch screen technology Illuminated power buttonControls RGBW light color and intensityWater resistant
Th Marine Pontoon Under Deck Led Light Kit, Blue, 20' - Led-Pbdk20B-Dp - 232-Ledpbdk20Bdpf1
Includes: Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Pontoon Under Deck Led Light Kit, Blue, 25' - Led-Pbdk25B-Dp - 232-Ledpbdk25Bdpf1
Includes: Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Pontoon Under Deck Led Light Kit, Rgb, 20' - Led-Pbdk20Rgb-Dp - 232-Ledpbdk20Rgbdpf1
Includes: IP68 RGB Controller with Remote Control, Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Pontoon Under Deck Led Light Kit, Rgb, 25' - Led-Pbdk25Rgb-Dp - 232-Ledpbdk25Rgbdpf1
Includes: IP68 RGB Controller with Remote Control, Two 20' or 25' Long IP68 LED Light Strips, Waterproof Wiring Harness, and Mounting Channels IP68 - Fully Waterproof and Submersible - Silicone Tube with Silicone Gel FillSimple Installation: Mounts with Adhesive Strips Pre-installed on Mounting Channels
Th Marine Track For Led Flat Rope Light Strip W/Mounting Tape - Led-Smslc50-4Wt-Dp - 232-Ledsmslc504Wtdpf1
Track w/mounting tape.
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 24 - Nbh-24P-Dp - 232-Nbh24Pdpf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 24, 20/Pack - Nbh-24P-20B - 232-Nbh24P20Bf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 27 - Nbh-27P-Dp - 232-Nbh27Pdpf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Th Nbh24Pdp Marine Narrow Battery Holder Tray, Series 31 - Nbh-31P-Dp - 232-Nbh31Pdpf1
The Narrow Battery Holder Tray is ideal for tight-space installations, and meets all NMMA specifications. Recess Mounting Wells - Recessed Fasteners - No TabsPoly Strap with Strong Quick Release BuckleResistant to Gasoline, Oil, Acid and Most Chemicals
Thruhull Connector 1-1/8 Bronze - 035006Adpp - 9-035006Adppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
Tie Down Engineering 44705 Tail Light Bracket - 44705 - 241-44705F1
Galvanized steel for long lasting durability.
Tie Down Engineering 86566 Tail Light Bracket - 86566 - 241-86566F1
Galvanized steel for long lasting durability.
Tie Down Engineering Dock Hardware - Female T Connector 5"L X 5"H - 26407 - 241-26407F1
Commercial grade w/ 1/2" tabs. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Female T Connector 5"L X 5"H - 26528 - 241-26528F1
Standard Grade w/ 1/2" tabs. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Galvanized Connector Pin Set 3/4" - 26531 - 241-26531F1
Standard grade. Used for quick disconnect of male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26408 - 241-26408F1
Commercial grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5"L x 5"H.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26427 - 241-26427F1
Commercial Grade w/ 3/4" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26532 - 241-26532F1
Standard Grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Galvanized Steel Panel Bracket - 86150 - 241-86150F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 4-3/8" W. Roller size is 4".
Tie Down Engineering Galvanized Steel Panel Bracket - 86151 - 241-86151F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 5-3/8" W. Roller size is 5".
Tie Down Engineering Galvanized Steel Panel Bracket - 86152 - 241-86152F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". BRacket is 8-3/8" W. Roller size is 6".
Tie Down Engineering Galvanized Steel Panel Bracket - 86153 - 241-86153F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 12-3/8" W. Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket - 86155 - 241-86155F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 10-3/8" W. Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86279 - 241-86279F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8". Roller size 5".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86280 - 241-86280F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket is 8-3/8". Roller size is 8".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86281 - 241-86281F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8". Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86282 - 241-86282F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8". Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86414 - 241-86414F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86415 - 241-86415F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86416 - 241-86416F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86417 - 241-86417F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86430 - 241-86430F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86431 - 241-86431F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86432 - 241-86432F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86433 - 241-86433F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Hot Dip Galvanized Split Panel Brackets - Sold As Pair (L & R) - 81235 - 241-81235F1
Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.
Tile Usb A C Charger Blk Socket 12/24V Black Bezel - Sc-Tile-10 - 922-Sctile10F1
Tilt Trim - 6211 - 57-6211F1
Fits: OMC stern-drive 1979-1985 2.5L, 3.0L3-wire connectionRing terminal ends
Tilt Trim Motor-Yamaha - 6261 - 57-6261F1
Fits: Yamaha 2003-Up 75, 80, 90 & 100 HP outboard engines. Replaces 67F-43880-00. Includes O-ring Includes:Includes O-ring
Tilt Trim Yam 6Gr-43880-02-00 Fits Yamaha 425Hp Motors Replaces 6Gr-43880-02-00 - 6300 - 57-6300F1
Tilt/Trim Motor - 6243 - 57-6243F1
Fits: O.M.C. 433226 1989-1992 M-suffix 40, 48, 50 HP2-wire connection; 4 bolt mountIncludes o-ring, hollow-hex shaftMale spade terminal ends.
Tilt/Trim Motor Heavy Duty - 6238 - 57-6238F1
Fits: O.M.C. 5005254 1998-Up, 75 HP-250 HPFFI Outboard engines, 4 bolt mountFemale sealed terminal ends includes o-ring
Timing Light - 18-9802 - 47-9802F1
Self-powered, accurate up to 10,000 RPM's.
Tinned Battery Lug, #1 25/Pack - 50-63941 - 50-63941F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #1 25/Pack - 60541 - 50-60541F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #1/0 25/Pack - 50-63881 - 50-63881F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #1/0 25/Pack - 60531 - 50-60531F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #2 25/Pack - 50-63921 - 50-63921F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #2 25/Pack - 60551 - 50-60551F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #2 25/Pack - 60561 - 50-60561F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #2/0 25/Pack - 50-60491 - 50-60491F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #2/0 25/Pack - 60521 - 50-60521F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #3/0 25/Pack - 50-63981 - 50-63981F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
Tinned Battery Lug, #4 2/Pack - 62501 - 50-62501F1
Marine grade, 99.9% pure copper, tin plated battery lugs. Seamless pad provides ultimate performance in strength, conductivity and corrosion resistance. UL Listed / CSA Certified.
