Wiring & Connectors
Seadog Buss Bar Stud Terminal, 150A - 426728-1 - 354-4267281F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 250A - 426738-1 - 354-4267381F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Double Pole Double Throw 8 Terminal Blade Light Tip 12V 15 Amp Toggle Switch - 420128-1 - 354-4201281F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405691-1 - 354-4056911F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405693-1 - 354-4056931F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seatech 35 Series Connector, 1/2" - 3/8" Reducing Union - 013516-1008 - 694-0135161008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Collet Clip - 013547-10 - 694-01354710F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Elbow Clip - 012349-15 - 694-01234915F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" End Stop - 013545-10 - 694-01354510 Superseded By: 694-0959109F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Hose Barb - 013513-1008 - 694-0135131008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Stackable Elbow - 013518-10 - 694-01351810F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Swivel Elbow, Female - 013520-0808 - 694-0135200808F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Union Elbow - 013517-08 - 694-01351708F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Union Tee - 013523-08 - 694-01352308F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, Ice Maker Stem Valve - 013543-1004 - 694-0135431004F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, Stackable 1/2" Hose Barb Union - 013511-1008 - 694-0135111008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seaworthy Seacaam/Fm Marine Stereo Amplified Am/Fm 12-3/4" Antenna - Includes 60" Wire - Seacaam/Fm - 646-Seacaamfmf1
12-3/4" antenna60° wire with plugUnder dash mount
Shakespeare Pl258G Barrel Connector For Pl-259-Ended Cables - Pl-258-G - 167-Pl258Gf1
Gold plated brass connector.
Shakespeare Pl25958G Pl259 Vhf Radio Connector W/Ug175 Adapter - Pl-259-58-G - 167-Pl25958Gf1
Gold plated brass connector.
Shakespeare Pl2598Xg Pl259 Vhf Radio Connector W/Ug176 Adapter - Pl-259-8X-G - 167-Pl2598Xgf1
Gold plated brass connector.
Shakespeare Pl259G Vhf Radio Connector - Pl-259-G - 167-Pl259Gf1
Gold plated brass connector.
Shields 2000344 Marine Exhaust Water Series 200 Hose Without Wire, 3/4" X 12-1/2' - 16-200-0344 - 88-2000344F1
Use for straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2000584 Marine Exhaust Water Series 200 Hose Without Wire, 5/8" X 12-1/2' - 16-200-0584 - 88-2000584F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001004 Marine Exhaust Water Series 200 Hose Without Wire, 1" X 12-1/2' - 16-200-1004 - 88-2001004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001124 Marine Exhaust Water Series 200 Hose Without Wire, 1-1/2" X 12-1/2' - 16-200-1124 - 88-2001124F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001144 Marine Exhaust Water Series 200 Hose Without Wire, 1-1/4" X 12-1/2' - 16-200-1144 - 88-2001144F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001344 Marine Exhaust Water Series 200 Hose Without Wire, 1-3/4" X 12-1/2' - 16-200-1344 - 88-2001344F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001584 Marine Exhaust Water Series 200 Hose Without Wire, 1-5/8" X 12-1/2' - 16-200-1584 - 88-2001584F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001784 Marine Exhaust Water Series 200 Hose Without Wire, 1-7/8" X 12-1/2' - 16-200-1784 - 88-2001784F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2002004 Marine Exhaust Water Series 200 Hose Without Wire, 2" X 12-1/2' - 16-200-2004 - 88-2002004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200212024 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/2" X 2' - 16-200-2120-24 - 88-200212024F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200212048 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/2" X 4' - 16-200-2120-48 - 88-200212048F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2002124 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/2" X 12-1/2' - 16-200-2124 - 88-2002124F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2002144 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/4" X 12-1/2' - 16-200-2144 - 88-2002144F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2002384 Marine Exhaust Water Series 200 Hose Without Wire, 2-3/8" X 12-1/2' - 16-200-2384 - 88-2002384F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2002784 Marine Exhaust Water Series 200 Hose Without Wire, 2-7/8" X 12-1/2' - 16-200-2784 - 88-2002784F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200300024 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 2' - 16-200-3000-24 - 88-200300024F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003001 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 6-1/4' - 16-200-3001 - 88-2003001F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003003 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 10' - 16-200-3003 - 88-2003003F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003004 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 12-1/2' - 16-200-3004 - 88-2003004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200312024 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 2' - 16-200-3120-24 - 88-200312024F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003121 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 6-1/4' - 16-200-3121 - 88-2003121F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003123 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 104' - 16-200-3123 - 88-2003123F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003124 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 12-1/2' - 16-200-3124 - 88-2003124F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2003341 Marine Exhaust Water Series 200 Hose Without Wire, 3-3/4" X 6-1/4' - 16-200-3341 - 88-2003341F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200400024 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 2' - 16-200-4000-24 - 88-200400024F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200400048 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 4/ - 16-200-4000-48 - 88-200400048F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2004001 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 6-1/4' - 16-200-4001 - 88-2004001F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2004003 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 10' - 16-200-4003 - 88-2004003F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2004004 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 12 1/2' - 16-200-4004 - 88-2004004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2004124 Marine Exhaust Water Series 200 Hose Without Wire, 4-1/2" X 12-1/2' - 16-200-4124 - 88-2004124F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200500048 Marine Exhaust Water Series 200 Hose Without Wire, 5" X 4' - 16-200-5000-48 - 88-200500048F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2005004 Marine Exhaust Water Series 200 Hose Without Wire, 5" X 12-1/2' - 16-200-5004 - 88-2005004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200600024 Marine Exhaust Water Series 200 Hose Without Wire, 6" X 2' - 16-200-6000-24 - 88-200600024F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 200600048 Marine Exhaust Water Series 200 Hose Without Wire, 6" X 4' - 16-200-6000-48 - 88-200600048F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2006004 Marine Exhaust Water Series 200 Hose Without Wire, 6" X 12-1/2'' - 16-200-6004 - 88-2006004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2008004 Marine Exhaust Water Series 200 Hose Without Wire, 8" X 12-1/2'' - 16-200-8004 - 88-2008004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields Marine Comflex Engine Wire Reinforced Hose - 50# Working Pressure - 16-321-1124 - 88-3211124F1
Shields Comflex is a versatile wire reinforced hose specially designed for inspected vessels. Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections.
Shields Marine Comflex Engine Wire Reinforced Hose - 75# Working Pressure - 16-321-0344 - 88-3210344F1
Shields Comflex is a versatile wire reinforced hose specially designed for inspected vessels. Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections.
Shields Marine Comflex Engine Wire Reinforced Hose - 75# Working Pressure - 16-321-0584 - 88-3210584F1
Shields Comflex is a versatile wire reinforced hose specially designed for inspected vessels. Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections.
Shields Marine Comflex Engine Wire Reinforced Hose - 75# Working Pressure - 16-321-1004 - 88-3211004F1
Shields Comflex is a versatile wire reinforced hose specially designed for inspected vessels. Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections.
Shields Marine Comflex Engine Wire Reinforced Hose - 75# Working Pressure - 16-321-1144 - 88-3211144F1
Shields Comflex is a versatile wire reinforced hose specially designed for inspected vessels. Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections.
Shields Marine Comflex Engine Wire Reinforced Hose | 50# Working Pressure - 16-321-2001 - 88-3212001F1
Shields Comflex is a versatile wire reinforced hose specially designed for inspected vessels. Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections.
Shields Marine Corrugated Black Exhaust Series 252 Hose With Wire, 2-1/2" X 12-1/2' - 16-252-2384 - 88-2522384F1
Designed to handle wet exhaust connections with significant bends, engine intake applications, and scupper lines. Black synthetic rubber tube and cover. Reinforced with double wire helix imbedded between plies of synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water and abrasions. Temperature range: -20°F to +200°F continuous, +250°F intermittent. Meets SAE J2006 Type R2.
Shields Marine Corrugated Black Exhaust Series 252 Hose With Wire, 3 1/2" X 6-1/4' - 16-252-3121 - 88-2523121 Superseded By: 88-2543121F1
Designed to handle wet exhaust connections with significant bends, engine intake applications, and scupper lines. Black synthetic rubber tube and cover. Reinforced with double wire helix imbedded between plies of synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water and abrasions. Temperature range: -20°F to +200°F continuous, +250°F intermittent. Meets SAE J2006 Type R2.
Shields Marine Corrugated Black Exhaust Series 252 Hose With Wire, 3" X 12-1/2' - 16-252-3004 - 88-2523004 Superseded By: 88-2543004F1
Designed to handle wet exhaust connections with significant bends, engine intake applications, and scupper lines. Black synthetic rubber tube and cover. Reinforced with double wire helix imbedded between plies of synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water and abrasions. Temperature range: -20°F to +200°F continuous, +250°F intermittent. Meets SAE J2006 Type R2.
Shields Marine Corrugated Black Exhaust Series 252 Hose With Wire, 3" X 6-1/4' - 16-252-3001 - 88-2523001F1
Designed to handle wet exhaust connections with significant bends, engine intake applications, and scupper lines. Black synthetic rubber tube and cover. Reinforced with double wire helix imbedded between plies of synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water and abrasions. Temperature range: -20°F to +200°F continuous, +250°F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0124 - 88-2500124F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0340S - 88-2500340F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0344 - 88-2500344F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0580S - 88-2500580F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0584 - 88-2500584F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0784 - 88-2500784F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1000S - 88-2501000F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1004 - 88-2501004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1120S - 88-2501120F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1124 - 88-2501124F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1140S - 88-2501140F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1144 - 88-2501144F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1184 - 88-2501184F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1344 - 88-2501344F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1384 - 88-2501384F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1584 - 88-2501584F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1784 - 88-2501784F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2000S - 88-2502000F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2004 - 88-2502004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2120-24 - 88-250212024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2120-48 - 88-250212048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2124 - 88-2502124F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2144 - 88-2502144F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2344 - 88-2502344F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2384 - 88-2502384F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2784 - 88-2502784F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-3120-24 - 88-250312024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-3120-48 - 88-250312048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-5000-24 - 88-250500024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-5000-48 - 88-250500048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 10' - 16-250-4003 - 88-2504003F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 12-1/2' - 16-250-4004 - 88-2504004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 2' - 16-250-4000-24 - 88-250400024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
