Select Category
Electrical
1 Guage Black Tinned Wire 250' - A2001T07250Ft - 446-A2001T07250Ftf1
1-1/2" White Interior/Exterior Light W/Ss Bezel - 6342Ss7 - 23-6342Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.
1-Pc. Replacement Drive Gear - Dv372 - 57-Dv372F1
1/2 Black Grommets (5) - 760500 - 639-760500F1
Flexible Black VinylProvides instant abrasion resistance to wires passing through panel holes.
1/4 B Solenoid + Fitting 12V - 130077082Kit - 606-130077082Kitf1
Low pressure brass LPG solenoid shut-off valve. Will not open with high pressure and will close with no or low electric current. Draws 790 mA when in use. CE certified. Comes with 2 brass connection fittings for ease of installation.
11" Nylon Standard Cable Tie, 25 Pcs. Natural - 50-14271 - 50-14271F1
Natural Cable Ties
12-1/2" Removable Bi-Color Light With Utility Light, 0 Degree Rake - 1211Dp2Chr - 9-1211Dp2Chrf1
USCG certified for use on sail or power driven vessels under 12 meter (39.4') 1 mile visibility3/4" diameter anodized aluminum tubesDeck illuminating utility light, 12 V bulb includedStow-a-way plug in type pole w/gold plated contacts
12-1/2" Removable Bi-Color Light With Utility Light, 5 Degree Rake - 1212Dp2Chr - 9-1212Dp2Chrf1
USCG certified for use on sail or power driven vessels under 12 meter (39.4') 1 mile visibility3/4" diameter anodized aluminum tubesDeck illuminating utility light, 12 V bulb includedStow-a-way plug in type pole w/gold plated contacts
12" Bi-Color Pole Light - 1612Dp2Blk - 9-1612Dp2Blkf1
USCG certified for use on power driven vessels under 12 meters (39.4 ft). length. 1 mile visibility. USCG, ABYC, NMMA Certified.Black plastic top. 3/4" dia. anodized aluminum tube. 12V bulb included. Requires 2 pin mounting base. Ideal for boats with casting decks on the bow. Can be unplugged and stowed while fishing. This leaves only a small, flat topped base.
12" Stealth Series Led Bi-Color Pole Light - 1617Dp2Blk - 9-1617Dp2Blkf1
Removable bi-color pole light. 12V. USCG certified for use on power vessels under 12 m (39.4 ft). One mile visibility. Stainless steel top, 3/4" diameter aluminum pole with 0° RakeStow-a-way plug-in type pole. Requires 2 pin mounting baseGold plated contactsDesigned to also fit most other manufacturer's basesLocking collar
12" X 12" Edge Mount Electric Trim Tab Kit W/Led Indicator Switch - 15110-103 - 622-15110103F1
Fast response electric actuators for precise control. Fully submersible. All plug & play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 11". 2" Hinge height. Kit Includes: 12-volt actuators (2) with 6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel trim tab blades, 12 gauge (2)Stainless Steel mounting hardwareLED Indicator Switch KitSwitch Kit
12" X 12" Trim Tab Kit W/Led Indicator Switch - 15109-103 - 622-15109103F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14". Kit Includes: Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardwareSwitch KitSwitch Kit
12In Aluminum Pick Up Assembl Fitting / Connector - C14543A12 - 50-20893F1
12V 12.8W Light Bulb #912, 2/Pk - 520912 - 639-520912F1
Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact.
12V 6W Festoon Light Bulb, 2/Pk - 529095 - 639-529095F1
Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact. Sold 2/pk.
12V Bi-Color Light - 1218Dp0Chr - 9-1218Dp0Chrf1
For use on power driven vessels under 12 meters (39.4ft.). One mile visibility. Certified for replacement use only. Chrome plated zinc alloy with flag staff socket. Red and Green lenses. Complete with 12 volt bulb. Screw size #8. I.D. socket is 3/4".
12V Bi-Color Light - 1310Dp0Chr - 9-1310Dp0Chrf1
For use on power driven vessels under 12 meters (39.4 ft.) in length. 1-mile visibility. USCG certified. Chrome plated top with black plastic base. 12V bulb included. Screw size is 8.
12V Hori Mount Sidelights Pr - 0963Dp0Chr - 9-0963Dp0Chrf1
USCG certified for use on sail or power driven vessels under 12 meters (39.4 ft.) in length. 1-mile visibility. Chrome plated brass top with black plastic base. 12V bulbs included. Screw size is 4.
12V Motor Reversing Solenoid - 24450-Bx - 12-24450Bxf1
DPDT intermittent duty. Common ground coil. Two blade coil terminals, 5/16" -24 large studs. Copper contacts. F bracket. 75A make and break, maximum On time 5 mins. 125A make and break, maximum On time 0.5 sec. Allow 5 mins. Off after max. On time. Max. operating voltage 14.5V DC. Cycle life 10,000 cycles at 5 sec. On, 25 sec. Off. Shipped w/ mounting hardware.
12V Solenoid Insulated - 24047-Bx - 12-24047Bxf1
Intermittent duty solenoid. Insulated, with plated steel housing. Normally Open contacts, one circuit: Off/On. 750A make, 100A break, 10sec on 20 min off.
12V Vert Mount Sidelight Pr - 1264Dp0Chr - 9-1264Dp0Chrf1
USCG Certified for replacement use on power driven vessels under 12 meters (39.4 ft.) in length. 1-mile visibility. Chrome plated zinc alloy with Black vinyl mounting gasket. 12V bulbs included. Screw size is 8.
12V Vert Side Light White 1Pr/Cd - 0254W00Dp1 - 9-0254W00Dp1F1
For use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Plastic construction w/gold plated contacts. 12V bulbs included. Screw size is 8.
12V White Sidelights - Horiz. - 0253W00Dp1 - 9-0253W00Dp1F1
For use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Plastic construction w/gold plated contacts. 12V bulbs included. Screw size is 8.
14" Nylon Standard Cable Tie, 25 Pcs. Natural - 50-14281 - 50-14281F1
Natural Cable Ties
15" Length High Flow Hose For High Capacity Regulators, Red Nut - Mer425H-15P - 277-Mer425H15Pf1
The High Flow Series Hoses are specifically designed to meet the high demands of today's motorhomes, trailers and on demand water heaters. High Flow Type I 400,000 BTU (red nut) pigtails are designed for those applications that require more than 200,000 BTU's. The High Flow pigtails are designed with both excess flow and thermal link safety features, same as the green nut Type I. 400,000 BTU'sExcess flow safety shut-offRVIA and NFPA 1192 CompliantBrass ferrules1/4" ID High pressure thermoplastic hose100% Leak tested350 PSIG working pressureInclude a Female QCC, Type 1 Connection and a 1/4" male inverted flare fitting
152-E7065300102 Axiom™ 2 Pro S High Performance Multifunction Navigation Display, 9" W/Chirp Conical Sonar For Cpt-S & Lighthouse North America Chart - E70653-00-102 - 152-E7065300102F1
Axiom 2 Pro, is upgraded with faster processors, superior displays, improved ergonomics, and the incredibly intuitive LightHouse 4 operating system. Get underway faster and confidently with Axiom 2 Pro's HybridTouch™ - a simple touchscreen experience plus reliable keypad control. Axiom 2 Pro chartplotters feature built-in wide-spectrum CHIRP sonars for fishing and navigation.Axiom 2 Pro S single High CHIRP sonar channel More Power: Get underway faster with Axiom 2 Pro's lighting-fast 6-core processorHybridTouch: Plan and plot your course with fluid touchscreen control and take command with confident keypad control when seas are roughCustomize: An interchangeable keypad gives you a choice an autopilot controls or user-programmable soft keysHydroTough™ Displays: Engineered to perform in extreme environments. HydroTough™ nano-coating technology repels water for reliable touchscreen control and enhances colors and sunlight visibilityNavigate Smarter: Chartplotter, sonar, radar, autopilot, and video integrated together seamlessly with the super easy LightHouse 4 operating systemAutomatic Display Brightness: An ambient light sensor automatically adjusts display brightness for day and evening lighting conditionsAdvanced Engine Integration: Connect with NMEA2000-compatible engines or experience advanced integration with Mercury SmartCraft and Yamaha Command Link enginesNetwork Like a Pro: Build a system with multiple Axiom displays and expanded video options, including HDMI output for remote displays and TVs
152-E7065500102 Axiom™ 2 Pro S High Performance Multifunction Navigation Display W/Chirp Conical Sonar For Cpt-S & Lighthouse North America Chart - E70655-00-102 - 152-E7065500102F1
Axiom 2 Pro, is upgraded with faster processors, superior displays, improved ergonomics, and the incredibly intuitive LightHouse 4 operating system. Get underway faster and confidently with Axiom 2 Pro's HybridTouch™ - a simple touchscreen experience plus reliable keypad control. Axiom 2 Pro chartplotters feature built-in wide-spectrum CHIRP sonars for fishing and navigation.Axiom 2 Pro S single High CHIRP sonar channel More Power: Get underway faster with Axiom 2 Pro's lighting-fast 6-core processorHybridTouch: Plan and plot your course with fluid touchscreen control and take command with confident keypad control when seas are roughCustomize: An interchangeable keypad gives you a choice an autopilot controls or user-programmable soft keysHydroTough™ Displays: Engineered to perform in extreme environments. HydroTough™ nano-coating technology repels water for reliable touchscreen control and enhances colors and sunlight visibilityNavigate Smarter: Chartplotter, sonar, radar, autopilot, and video integrated together seamlessly with the super easy LightHouse 4 operating systemAutomatic Display Brightness: An ambient light sensor automatically adjusts display brightness for day and evening lighting conditionsAdvanced Engine Integration: Connect with NMEA2000-compatible engines or experience advanced integration with Mercury SmartCraft and Yamaha Command Link enginesNetwork Like a Pro: Build a system with multiple Axiom displays and expanded video options, including HDMI output for remote displays and TVs
152-E7065700102 Axiom™ 2 Pro S High Performance Multifunction Navigation Displayw/Chirp Conical Sonar For Cpt-S & Lighthouse North America Chart - E70657-00-102 - 152-E7065700102F1
Axiom 2 Pro, is upgraded with faster processors, superior displays, improved ergonomics, and the incredibly intuitive LightHouse 4 operating system. Get underway faster and confidently with Axiom 2 Pro's HybridTouch™ - a simple touchscreen experience plus reliable keypad control. Axiom 2 Pro chartplotters feature built-in wide-spectrum CHIRP sonars for fishing and navigation.Axiom 2 Pro S single High CHIRP sonar channel More Power: Get underway faster with Axiom 2 Pro's lighting-fast 6-core processorHybridTouch: Plan and plot your course with fluid touchscreen control and take command with confident keypad control when seas are roughCustomize: An interchangeable keypad gives you a choice an autopilot controls or user-programmable soft keysHydroTough™ Displays: Engineered to perform in extreme environments. HydroTough™ nano-coating technology repels water for reliable touchscreen control and enhances colors and sunlight visibilityNavigate Smarter: Chartplotter, sonar, radar, autopilot, and video integrated together seamlessly with the super easy LightHouse 4 operating systemAutomatic Display Brightness: An ambient light sensor automatically adjusts display brightness for day and evening lighting conditionsAdvanced Engine Integration: Connect with NMEA2000-compatible engines or experience advanced integration with Mercury SmartCraft and Yamaha Command Link enginesNetwork Like a Pro: Build a system with multiple Axiom displays and expanded video options, including HDMI output for remote displays and TVs
17" Bi-Color Pole Light - 1612Dp3Blk - 9-1612Dp3Blkf1
USCG certified for use on power driven vessels under 12 meters (39.4 ft). length. 1 mile visibility. USCG, ABYC, NMMA Certified.Black plastic top. 3/4" dia. anodized aluminum tube. 12V bulb included. Requires 2 pin mounting base. Ideal for boats with casting decks on the bow. Can be unplugged and stowed while fishing. This leaves only a small, flat topped base.
18-8852 Battery Cable Red 4 Ga - Bc88523 - 11-Bc88523F1
Features a soldered lug terminal on each end to accept a 3/8" stud.
18-8853 Battery Cable Black 4 Ga - Bc88533 - 11-Bc88533F1
Features a soldered lug terminal on each end to accept a 3/8" stud.
185/285 Series Panel Mount Circuit Breaker Bezel - 7198-Bss - 661-7198F1
Self trimming molded rubber bezel.
1St Mate 98-8M6007933 Wireless Man Overboard Alert System For Mercury Smaftcraft - Single Engine - 8M6007933 - 710-98-8M6007933F1
1st Mate Marine Safety and Security System for Mercury SmartCraft Engines is compatible with Mercury SmartCraft engines 40hp and higher manufactured since 2005. System kit includes vessel hub, wire harness, antenna, NFC tag and installation instructions along with captain's fob, wristband and carabiner clip. Passenger wearable fob kits are available separately. Requires 1st Mate mobile app. 1st Mate Marine Safety and Security System utilizes wearable fobs for boat captain and up to seven passengers. These wearables connect to a mobile device and ensure that if the captain falls overboard, the engine(s) will stop, an alarm will sound and alerts will be sent via the 1st Mate mobile app, thanks to direct integration with the vessel's propulsion system. Similarly, if a passenger falls overboard, the captain will be alerted and given the passenger's GPS location via the app. Engine(s) stop when fob is submerged in waterSetting that users can configure that turns off alerts if engine(s) is in neutralOver the air updatesAudible alarm from boat hub and mobile device appLocation marked via GPS on app and vessel multifunction displays (if equipped)Alerts sent to mobile app and wearables of connected passenger(s)Instructions provided on mobile app of connected passenger(s) on how to return to location where captain went overboard Engine Systems Include: App, Hub, Harness, Captain FOB, Captain Wristband, Captain Carabiner Clip Wearable Fob Kits Include: FOB, Wristband, Carabiner Clip NOTE: 1st Mate is not a replacement for safety lanyards or personal floatation devices.
1St Mate 98-8M6007934 Wireless Man Overboard Alert System For Mercury Smaftcraft - Twin Engines - 8M6007934 - 710-98-8M6007934F1
1st Mate Marine Safety and Security System for Mercury SmartCraft Engines is compatible with Mercury SmartCraft engines 40hp and higher manufactured since 2005. System kit includes vessel hub, wire harness, antenna, NFC tag and installation instructions along with captain's fob, wristband and carabiner clip. Passenger wearable fob kits are available separately. Requires 1st Mate mobile app. 1st Mate Marine Safety and Security System utilizes wearable fobs for boat captain and up to seven passengers. These wearables connect to a mobile device and ensure that if the captain falls overboard, the engine(s) will stop, an alarm will sound and alerts will be sent via the 1st Mate mobile app, thanks to direct integration with the vessel's propulsion system. Similarly, if a passenger falls overboard, the captain will be alerted and given the passenger's GPS location via the app. Engine(s) stop when fob is submerged in waterSetting that users can configure that turns off alerts if engine(s) is in neutralOver the air updatesAudible alarm from boat hub and mobile device appLocation marked via GPS on app and vessel multifunction displays (if equipped)Alerts sent to mobile app and wearables of connected passenger(s)Instructions provided on mobile app of connected passenger(s) on how to return to location where captain went overboard Engine Systems Include: App, Hub, Harness, Captain FOB, Captain Wristband, Captain Carabiner Clip Wearable Fob Kits Include: FOB, Wristband, Carabiner Clip NOTE: 1st Mate is not a replacement for safety lanyards or personal floatation devices.
1St Mate 98-8M6007937 Wireless Man Overboard Alert System For Mercury Smaftcraft - Triple Engines - 8M6007937 - 710-98-8M6007937F1
1st Mate Marine Safety and Security System for Mercury SmartCraft Engines is compatible with Mercury SmartCraft engines 40hp and higher manufactured since 2005. System kit includes vessel hub, wire harness, antenna, NFC tag and installation instructions along with captain's fob, wristband and carabiner clip. Passenger wearable fob kits are available separately. Requires 1st Mate mobile app. 1st Mate Marine Safety and Security System utilizes wearable fobs for boat captain and up to seven passengers. These wearables connect to a mobile device and ensure that if the captain falls overboard, the engine(s) will stop, an alarm will sound and alerts will be sent via the 1st Mate mobile app, thanks to direct integration with the vessel's propulsion system. Similarly, if a passenger falls overboard, the captain will be alerted and given the passenger's GPS location via the app. Engine(s) stop when fob is submerged in waterSetting that users can configure that turns off alerts if engine(s) is in neutralOver the air updatesAudible alarm from boat hub and mobile device appLocation marked via GPS on app and vessel multifunction displays (if equipped)Alerts sent to mobile app and wearables of connected passenger(s)Instructions provided on mobile app of connected passenger(s) on how to return to location where captain went overboard Engine Systems Include: App, Hub, Harness, Captain FOB, Captain Wristband, Captain Carabiner Clip Wearable Fob Kits Include: FOB, Wristband, Carabiner Clip NOTE: 1st Mate is not a replacement for safety lanyards or personal floatation devices.
1St Mate 98-8M6007938 Wireless Man Overboard Alert System For Mercury Smaftcraft - 4, 5 Or 6 Engines - 8M6007938 - 710-98-8M6007938F1
1st Mate Marine Safety and Security System for Mercury SmartCraft Engines is compatible with Mercury SmartCraft engines 40hp and higher manufactured since 2005. System kit includes vessel hub, wire harness, antenna, NFC tag and installation instructions along with captain's fob, wristband and carabiner clip. Passenger wearable fob kits are available separately. Requires 1st Mate mobile app. 1st Mate Marine Safety and Security System utilizes wearable fobs for boat captain and up to seven passengers. These wearables connect to a mobile device and ensure that if the captain falls overboard, the engine(s) will stop, an alarm will sound and alerts will be sent via the 1st Mate mobile app, thanks to direct integration with the vessel's propulsion system. Similarly, if a passenger falls overboard, the captain will be alerted and given the passenger's GPS location via the app. Engine(s) stop when fob is submerged in waterSetting that users can configure that turns off alerts if engine(s) is in neutralOver the air updatesAudible alarm from boat hub and mobile device appLocation marked via GPS on app and vessel multifunction displays (if equipped)Alerts sent to mobile app and wearables of connected passenger(s)Instructions provided on mobile app of connected passenger(s) on how to return to location where captain went overboard Engine Systems Include: App, Hub, Harness, Captain FOB, Captain Wristband, Captain Carabiner Clip Wearable Fob Kits Include: FOB, Wristband, Carabiner Clip NOTE: 1st Mate is not a replacement for safety lanyards or personal floatation devices.
2 Mile Bow Light Chrome - 0252Mb0Dp1 - 9-0252Mb0Dp1F1
For use on power driven vessels under 20 meters (65.6 ft) in length. 2-mile visibility. Plastic construction. 12V bulb included. Screw size is 8.
2 Wire Polarized Connector W/Leads - 426880-1 - 354-4268801F1
2-Wire Polarized Electrical Connector is an SAE type, two-prong plug and socket connector set. Polarized to assure the proper mating of circuits, reducing the chance of accidental reverse polarity. Color coded 16-gauge 12" lead wire with bullet-type contact pins. Weather resistant connectors are vibration and strain resistant. Use of dielectric grease recommended to further protect circuit from salt spray, debris, and corrosion. Constructed of injection molded PVC. 20A. 12-24VDC.
2-1/2 Tow Bar Hitch Connector Receiver, 3/4 Pin, Standard Avail, Appollo, Ascent - Bx88448 - 123-Bx88448F1
2-1/2" Amber Clearance Light - 142A - 177-142Af1
2-1/2" Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug to complete installation.
2-1/2" Red Clearance Light - 142R - 177-142Rf1
2-1/2" Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug to complete installation.
2-1/2" Red Clearance Light - V142R - 177-V142Rf1
2-1/2" Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug to complete installation.
2-3/4" Warm White Interior/Exterior Light W/White Bezel - 6320W7 - 23-6320W7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.
2" Round Side Marker Light, Amber - 203380 - 274-203380F1
Waterproof and sealed. Round, clearance/side marker light with flush mounted rubber grommet designed for quick and easy installation. Rugged ABS base that has the acrylic lens sonic welded to the base. 2-Wire 6" pigtails. These replacement lights are 2" in diameter and require a rubber grommet (not included) for mounting.
20 Gang Terminal Block-Common - M-448-Bx - 12-M448Bxf1
Solid brass busbar safely carries up to 150A. Two 1/4" -20 diameter brass stud with hex nuts. 8-32 round head screws for attaching wires. Moisture repellent thermoplastic insulator base. 2 mounting holes. Safely carries up to 150 amps.
20" All-Round Telescoping Pole Light - 1311Dp2Chr - 9-1311Dp2Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Screw size is #8. 12V bulb 0337011DP included. Telescoping base (3-3/4" x 1-5/8") included. Spare Base #1059T00DP.
221351 Raritan Solenoid Valve, Fits Marine Elegance/Atlantes Models - 221351 - 78-221351F1
Fresh Water Solenoid Valve for Marine Elegance and Atlantes AVHWF models replacement part.
24 All Round Telescoping Pole Light - 1611Dp2Chr - 9-1611Dp2Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Screw size is 8. 12V bulb included. Telescoping mounting base included. Base: 3-3/4" x 1-5/8". Spare Base #1059T00DP.
24 All-Round Pole Light - 1330Dp2Chr - 9-1330Dp2Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Gold plated contacts. Screw size is 8. 2-Pin mounting base and 12V bulb included. Base: 3-3/4" x 1-5/8".
24" Length High Flow Hose For High Capacity Regulators. - Mer425H-24P - 277-Mer425H24Pf1
400,000 BTU'sExcess flow safety shut-offRVIA and NFPA 1192 CompliantBrass ferrules1/4" ID High pressure thermoplastic hose100% Leak tested350 PSIG working pressureInclude a Female QCC, Type 1 Connection and a 1/4" male inverted flare fitting
24" Universal Replacement All-Round Light - 1400Dp2Chr - 9-1400Dp2Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
24V 10W Festoon Light Bulb, 2/Pk - 522129 - 639-522129F1
Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact. Sold 2/pk.
3 Button Wireless Remote Kit - 68000967 - 239-68000967F1
Wireless remote kit allows wireless remote operation (Up/Down) of any Lewmar or Simpson Lawrence (solenoid switched) windlass. Easily retrofits existing installations to any windlass or thruster with a dual direction solenoid. The floating FOBs operate with 2 AAA alkaline batteries, the receiver connects to any ships power from 10-30Vdc and will operate up to 8 remote key fobs. FCC & CE approved.Kit includes one wireless FOB and one receiver.
3 Wire Rectifier - Ar103 - 57-Ar103F1
Replaces: OMC 580841, 581305, 582307, & 582399.
3-Position Two Circuit Switch - 420410-1 - 354-4204101F1
One circuit, normally off, three position: Off/On/On. When pulled to the first position, the first circuit is activated. At the second position, both the first and the second circuit are both activated. Ideal for lighting such as cabin or running lights. Stamped brass. 15 amps @ 12 VDC. 3/8" x 1" Shaft.
3-Post Heavy-Duty Outboard Rectifier - Ar351 - 57-Ar351F1
3", 4 Wire Roller Frame - 92101 - 50-92101F1
Plated rodsPlastic threaded handleDiameter: 1-1/2"
3/8 Black Grommets (5) - 760375 - 639-760375F1
Flexible Black VinylProvides instant abrasion resistance to wires passing through panel holes.
3/8 Brass Solenoid + Fittings, 12V - 1300-7706.2 Kit - 606-130077062Kitf1
Low pressure brass LPG solenoid shut-off valve. Will not open with high pressure and will close with no or low electric current. Draws 790 mA when in use. CE certified. Comes with 2 brass connection fittings for ease of installation.
30" All Around Led Nav Light @24 *Sold By The Case Only* - 5550-S30-1 - 23-5550S301F1
30" Universal Replacement All-Round Light - 1400Dp3Chr - 9-1400Dp3Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
30A Circuit Breaker F/315 - P78372Aj - 313-P7837200Ajf1
30 amp. For 412, 602, 60340 amp. For models 71260 amp. For models 77712, 812, 77912, 77192, 77114, SH-12HB
32" All-Round Telescoping Pole Light - 1311Dp4Chr - 9-1311Dp4Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Screw size is #8. 12V bulb 0337011DP included. Telescoping base (3-3/4" x 1-5/8") included. Spare Base #1059T00DP.
35 Amp Breaker For S600 - 66830003 - 239-66830003F1
Slow blow thermal magnetic breaker.
36 All-Round Pole Light - 1330Dp4Chr - 9-1330Dp4Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Gold plated contacts. Screw size is 8. 2-Pin mounting base and 12V bulb included. Base: 3-3/4" x 1-5/8".
36" Delta Pole Light - 1470Dp4Chr - 9-1470Dp4Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
36" Universal Replacement All-Round Light - 1400Dp4Chr - 9-1400Dp4Chrf1
For use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
360 Panel 8 Position Dc Breaker Panel - 1200-Bss - 661-1200F1
With Hydraulic/Magnetic Circuit Breakers. Designed for circuits requiring both circuit protection and switchingInstalled 15 ampere circuit breakerIncludes square format label set
3Ag Waterproof Fuse Holder - 5021-Bss - 661-5021F1
Waterproof, will withstand water exposure normally encountered in above deck applications: salt spray, rain, hose washdown, or momentary immersion. 20A(max) and 250V(max).
3M 04028 Scotch Brite Hand Pads, Ultra Fine, Light Grey, 20/Box - 4028 - 71-04028F1
Scotch-Brite™ Hand Pads may be used by hand, on a hand pad block or on an in-line sander.Ultra Fine: For light cleaning, finishing of metal, plastic, composite and wood surfaces
3M 06126 Scotchlok™ Instant Electric Connector, Blue, 50/Pk - 6126 - 71-06126F1
Make inline, pigtail and tap splices on solid or stranded wire with no stripping. With a standard pair of pliers any wiring job can be installed easier and faster. Not moisture resistant.
3M 29924 Ias Hose 3-Light 7000 As, 23 Ft - 7100098399 - 71-29924F1
Diffused external exhaust air guide ensures flexible working Diffused external exhaust air guide ensures flexible working2-in-1 hose and IAS interface are easy to use and save time when changing toolsRotating adapter ensures smooth, rapid working progress and saves timeAnti-static properties help prevent buildup of dust inside hoseFestool IAS 3-Light AS Hoses is an anti-static hose for use with all Festool tools. This hose is designed for connecting a Festool compressed air sander to a Festool mobile dust extractor or energy box.
3M 30005 Ias Hose 3-Light 10000 As, 32 Ft - 7100144188 - 71-30005F1
Diffused external exhaust air guide ensures flexible working Diffused external exhaust air guide ensures flexible working2-in-1 hose and IAS interface are easy to use and save time when changing toolsRotating adapter ensures smooth, rapid working progress and saves timeAnti-static properties help prevent buildup of dust inside hoseFestool IAS 3-Light AS Hoses is an anti-static hose for use with all Festool tools. This hose is designed for connecting a Festool compressed air sander to a Festool mobile dust extractor or energy box.
4 Exterior Dome Light White - 1253Dp1Wht - 9-1253Dp1Whtf1
IVory PERKO-Kote zinc alloy. Double contact bayonet socket. Black vinyl mounting gasket. Push switch with water resistant boot. 12 volt bulb included.
4 Led Festoon Bulb 1-1/2, 1/Cd - 442236-1 - 354-4422361F1
Nickel Plated Brass. 12V, 20 mA
4 Led Festoon Bulb 1-1/4, 1/Cd - 442232-1 - 354-4422321F1
Nickel Plated Brass. 12V, 20 mA
4 Led Round Blue W/Chrome Bezel 12V - 980502271 - 265-980502271F1
Hellamarine 3" round LED UV resistant courtesy lamps can be installed almost anywhere onboard. Advanced lens technology provides a cool, even spread of soft light while consuming less than .5W, a fraction of the energy of traditional bulbs. Each lamp is completely sealed, highly shock, impact and vibration resistant and run extremely cool for safer installations where the heat of an incandescent lamp may cause damage. Flush mount installations require a 2" cutout. Flush/Surface mount models include an adapter ring for surface mount applications.
4 Led Round White/Ss Bezel 12V - 980500021 - 265-980500021F1
Hellamarine 3" round LED UV resistant courtesy lamps can be installed almost anywhere onboard. Advanced lens technology provides a cool, even spread of soft light while consuming less than .5W, a fraction of the energy of traditional bulbs. Each lamp is completely sealed, highly shock, impact and vibration resistant and run extremely cool for safer installations where the heat of an incandescent lamp may cause damage. Flush mount installations require a 2" cutout. Flush/Surface mount models include an adapter ring for surface mount applications.
4 Pole Rubberized Connector - M-115-Bp - 12-M115Bpf1
Durable rubber caps that protect connections against moisture and dirt. Corrosion resistant construction. Moisture repellent insulation. Brass contacts are polarized to assure proper mating of circuits.
4 Surface Mount Dome Light (1) - 0300Dp1Chr - 9-0300Dp1Chrf1
A double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Chrome plated zinc. Screw size is 10 R.H., except for 0300DP2CHR which is 12 R.H.
4 Switch Illiminated Switch Panel, Vertical - 422010-1 - 354-4220101F1
Aluminum Vertical Rocker Switch Panel is constructed of stamped anodized aluminum. Features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with four #6 RH fasteners (not included).
4-Pin Flat Trailer End Connector - 54000-026 - 274-54000026F1
Coiled 14 gauge cable with 4-way flat trailer end connectors. Cable extended length to 11 feet.
4-Way Flat Connector 12"Trailer Side - 57851 - 50-57851F1
Industry standard connector used for most light-duty applications including RV, marine & utility trailers where electric brakes or other additional power demands are not required 18 Ga. Bonded WireTin Plated .187 Terminals for Improved Current Capacity and Corrosion ResistanceFlexible Molded PVC Connectors7.5 Amp Max LoadContains: Harness with Trailer-Side Connector, Attachment Hardware, Detailed Wiring Instructions
4-Way Flat Trailer Harness 24" Trailer Side With Separate Tail Light Wires - 57971 - 50-57971F1
Industry standard connector used for most light-duty applications including RV, marine & utility trailers where electric brakes or other additional power demands are not required 18 Ga. Bonded WireContains: Harness, Attachment Hardware, Detailed Wiring Instruction
4-Way Flat Trailer Harness 48"Car Side For 2-Wire Systems - 57841 - 50-57841F1
Industry standard connector used for most light-duty applications including RV, marine & utility trailers where electric brakes or other additional power demands are not required 18 Ga. Bonded WireContains: Harness, Attachment Hardware, Detailed Wiring Instruction
4" Nylon Standard Cable Tie, 100 Pcs. Black - 14131 - 50-14131F1
Black Uv Resistant Cable Ties
4" Standard Cable Ties, Natural 25/Pack - 199200 - 639-199200F1
High quality contruction provides a great solution for bundling wire, cable, hoses, cords and many other applications. Made from pure nylon for maximum life and are impervious to salt, chemical solvents and acids.
4", 4 Wire Roller Frame - 92111 - 50-92111F1
Plated rodsPlastic threaded handleDiameter: 1-1/2"
408 Series Fuse Block, 6 Gang Replaces Blue Sea 5035 - Fs40850 - 11-Fs40850F1
40A Auto Reset Circuit Breaker - Cb42240 - 11-Cb42240F1
Perfect for rigging trolling motors, windlesses and other high amp electrical equipment. Includes stud mounting plate and 8 GA ring terminal.
40A Circuit Breaker - Cb43240 - 11-Cb43240F1
Perfect for rigging trolling motors, windlesses and other high amp electrical equipment. Includes stud mounting plate and 8 GA ring terminal.
42" Delta Pole Light - 1470Dp5Chr - 9-1470Dp5Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
42" Universal Replacement All-Round Light - 1400Dp5Chr - 9-1400Dp5Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
48" Delta Folding Pole Light - 1451Dp6Chr - 9-1451Dp6Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
48" Delta Pole Light - 1470Dp6Chr - 9-1470Dp6Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
48" Universal Replacement All-Round Light - 1400Dp6Chr - 9-1400Dp6Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
5 Button Wireless Remote Kit - 68000968 - 239-68000968F1
Wireless remote kit allows wireless operation of any Lewmar or Simpson Lawrence (solenoid switched) windlass (up/down) & thruster. Easily retrofits existing installations to any windlass or thruster with a dual direction solenoid. The floating FOBs operate with 2 AAA alkaline batteries, the receiver connects to any ships power from 10-30Vdc and will operate up to 8 remote key FOBs. FCC & CE approved.Kit includes one wireless FOB, one thruster receiver & one windlass receiver.
5 Exterior Dome Light White - 1253Dp2Wht - 9-1253Dp2Whtf1
IVory PERKO-Kote zinc alloy. Double contact bayonet socket. Black vinyl mounting gasket. Push switch with water resistant boot. 12 volt bulb included.
5 Surface Mount Dome Light (1) - 0300Dp2Chr - 9-0300Dp2Chrf1
A double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Chrome plated zinc. Screw size is 12 R.H.
5-Way Flat Connectoseachoice 5-Way Flat Connector Cover - 50-57951 - 50-57951F1
Keeps connector clean. Built-in tether retains cover when not in use. Helps to prevent rust & corrosion. Manufactured from black PVC rubber.
5.0L, 5.8L Ford Starter - 70125 - 57-70125F1
Replaces: OMC 987811 & Volvo 3854190-0 Permanent magnet12 volt
50A Circuit Breaker - Cb43250 - 11-Cb43250F1
Perfect for rigging trolling motors, windlesses and other high amp electrical equipment. Includes stud mounting plate and 8 GA ring terminal.
54" Delta Pole Light - 1470Dp7Chr - 9-1470Dp7Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
54" Universal Replacement All-Round Light - 1400Dp7Chr - 9-1400Dp7Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
6 Function Submersible Tail Light, Combination - St6Rbp - 158-St6Rbpf1
Submersible stud mount combination tail lights for under 80" applications.
6 Led Festoon Bulb 1-1/2, 1/Cd - 442237-1 - 354-4422371F1
Nickel Plated Brass. 12V, 20 mA
6 Led Festoon Bulb 1-3/4, 1/Cd - 442244-1 - 354-4422441F1
Nickel Plated Brass. 12V, 30 mA
6 Switch Illiminated Switch Panel, Vertical - 422110-1 - 354-4221101F1
Aluminum Vertical Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
6 Way Round To 4 Flat Trailer Wiring Adapter - 57731 - 50-57731F1
Supports tail lights, left & right stop & turn lamps Durable molded plastic housing resists corrosion
6-1/2" Speaker Led Accent Ring, Blue - Led-Smskr-B-Dp - 232-Ledsmskrbdpf1
Accent any 6" round speaker with attractive LEDs. Light up your boat speakersFits behind 6" round speaker enclosuresEasy installationRing contains 30 attractive LEDs
6" Nylon Standard Cable Tie, 100 Pcs. Black - 14141 - 50-14141F1
Black Uv Resistant Cable Ties
6" Nylon Standard Cable Tie, 25 Pcs. Natural - 50-14251 - 50-14251F1
Natural Cable Ties
6" Oval Led Stop, Tail And Turn Lamp, Horizontal Mt. - 401584 - 274-401584F1
Featuring LED Technology, these grommet mount lights are waterproof and meet FMVSS/CMVSS 108 requirements. Lights are mounting-orientation specific. Mounting bracket sold separately. 6-1/2" x 2-5/16" x 7/8".
6" X 9" 4-Way Waketower Speaker System W/Rgb Led Lights - Mrwt69Rgb - 153-Mrwt69Rgbf1
RGB feature allows for control of LED light functions. Choose from having a constant one color illumination of choice or to rotate between multiple colors in a strobe or fade mode. 20 Mulit-color illumination options19 Dynamic Illumination PatternsSpeed and brightness controlInterconnect lighting controlPower handling: Peak 600WFrequency response: 6540Hz-20KhzSensitivity @ 1 Watt/1 Meter: 89dBImpedance: 4 OhmPolypropylene Cone and High Performance Voice Coil4" Midbass DriverTweeter: 1" PEI DomeMounting Bracket: 2"©3" Diameter
60" Delta Folding Pole Light - 1451Dp8Chr - 9-1451Dp8Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
60" Delta Pole Light - 1470Dp8Chr - 9-1470Dp8Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globe reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
60A Circuit Breaker - Cb60000-1 - 11-Cb600001F1
Perfect for rigging trolling motors, windlesses and other high amp electrical equipment. Includes stud mounting plate and 8 GA ring terminal.
6Ga Black Tinned Wire, 50' - A2006T07050Ft - 446-A2006T07050Ftf1
7 Function Submersible Tail Light - St4Rbp - 158-St4Rbpf1
Submersible Over 80" Combination Tail Lights. ST4RB is 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex.Mounts on 2" centers
7-1/8" White All-Round Light - 1301Dp0Chr - 9-1301Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe and black plastic top, black plastic base, and 3/4" diameter anodized aluminum tube. Fixed mount. 12V bulb included. Screw size is 8.
7-Way Round Uscar Style Connectorcar Side, Heavy Duty - - 50-57861F1
Designed for use with RV and heavier utility & equipment trailers equipped with electric brakes. Attachment holes align with most industry mounting brackets. Direct replacement for factory 7-way connectors on most Audi, Chrysler, Dodge, Ford, Jeep, Porsche, Ram, Toyota and Volkswagen vehicles equipped with trailer tow package wiring. Supports tail lights, stop & turn lamps, trailer brake 12V+ feed and auxiliary connectionsPotted connector terminals and gasketed spring-loaded door for strong weather-resistant designPlastic connector body resists corrosionEasily snaps onto mating harness assemblyCompatible with RV-style 7-way trailer connectors30 Amp max load
7-Way Round Uscar Style Twist-Lock Connectorcar Side, Twist-Lock - 50-57941 - 50-57941F1
Designed for use with RV and heavier utility & equipment trailers equipped with electric brakes. Features Twist-Lock style mounting to factory bracket. Fits '99-Current GM "Twist-Lock". Supports tail lights, stop & turn lamps, trailer brake 12V+ feed and auxiliary connectionsPotted connector terminals and gasketed spring-loaded door for strong weather-resistant designPlastic connector body resists corrosionEasily snaps onto mating harness assemblyCompatible with RV-style 7-way trailer connectors30 Amp max load
7-Way To 6-Way Connector Adapter - 12-719Ep - 329-12719Epf1
Converts 7-way Blade Connector Socket to a 6-way Round Connector Plug Allows one vehicle to tow campers or utility trailersQuick and easy to connectNon corrosive glass-filled nylon shell
7-Way Trailer Wiring 8' Cable With 7-Way Molded Connector - 58111 - 50-58111F1
UV resistant cable. Blade-type connector. Molded connector design resists breakdown. Compatible with both RV and USCar style vehicle connectors.
7" Spark Tester Wire - 511-9902 - 667-5119902F1
7" Extension wire for use with the CDI511-9766 spark gap testerSet of 4
7", 4 Wire Roller Frame - 92121 - 50-92121F1
Plated rodsPlastic threaded handleDiameter: 1-1/2"
70Amp Breaker - 68000240 - 239-68000240F1
Slow blow thermal magnetic breaker.
772Dbcez Bep Pro Installer 400A Ez-Mount Battery Switch, 1, Both - 772-Dbc-Ez - 969-772Dbcezf1
These revolutionary battery switches allow you to wire from the front. Installation and cabling is easy and accessible. With their shared interconnection height, EZ-Mount battery switches cluster directly with the Pro Installer Busbar Range, resulting in the fast, compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches. Tested to UL1107 ignition protection, CETinned copper 3/8" (10mm) studsStainless steel washers/nuts400A Continuous / 600A 5 mins Intermittent / 1500A 10 secs CrankingWaterproof to IP66Removable knob allows isolation during servicing3 removable sideplates for protectionIndustry standard 3.85" x 3.85" footprint
8 Function Submersible Tail Light, Combination - St5Rbp - 158-St5Rbpf1
Submersible Over 80" Combination Tail Lights. ST5RB is same as ST4RB plus license illuminator. Feature built-in rear clearance light, eliminating the need for a separate light to meet DOT requirements. Mounts on 2" centers
8 Led Festoon Bulb 1-3/4, 1/Cd - 442245-1 - 354-4422451F1
Nickel Plated Brass. 12V, 30 mA
8" Nylon Mounting Cable Tie, 25 Pcs. Black - 14161 - 50-14161F1
Black Uv Resistant Cable Ties
8" Nylon Mounting Cable Tie, 25 Pcs. Natural - 50-14291 - 50-14291F1
Natural Cable Ties
8" Nylon Standard Cable Tie, 25 Pcs. Black - 14101 - 50-14101F1
Black Uv Resistant Cable Ties
8" Nylon Standard Cable Tie, 25 Pcs. Natural - 50-14261 - 50-14261F1
Natural Cable Ties
8D Battery Box - 90-2169 - 100-902169F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
8D High Battery Box - 90-2170 - 100-902170F1
Molded of premium grade polyethylene. The seamless, heavy wall construction, combined with superior chemical resistance, eliminates concerns of electrolyte spills or contact with grease, oil etc.. The full flow ventilation features help ensure adequate cooling and will enhance the longevity of battery life. When properly installed these products comply with USCG code of Federal Regulations 33, Sub-chapter 183.420. Black.
9 4 Wire Roller Frame - 92131 - 50-92131F1
Plated rodsPlastic threaded handleDiameter: 1-1/2"
9-0618Dp0Sts Led Vertical Mount Side Lights - 0618Dp0Sts - 9-0618Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Stainless steel top with black polymer baseDesigned to be mounted only on a vertical surfaceMeets Global Specifications for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16, the '72 COLREGS and the U.S. Inland RulesScrew Size: #62.5 Watts, 0.21 AmpsMade in the USA
9-0625Dp0Sts Led Horizontal Mount Bi-Color Light - 0625Dp0Sts - 9-0625Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polished stainless steel top with black polymer base, High tech, self contained LED modulesNew stylish low profile design. Similar footprint as the 0615/ 0616 LED lightsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR 2nmScrew Size: #62.5 Watts, 0.21 ampsMade in the USA
9-0626Dp0Sts Led Horizontal Mount Side Lights - 0626Dp0Sts - 9-0626Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft.). 2nm visibility. Polished stainless steel top with black polymer base, High tech, self contained LED modulesNew stylish low profile design. Similar footprint as the 0615/ 0616 LED lightsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew size: #62.5 Watts, 0.21 ampsMade in the USA
9-1658Dp1Alu Led White All-Round Light-Fixed Mount, 4" - 1658Dp1Alu - 9-1658Dp1Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer Top and base with clear frosted lens3/4" Aluminum tube poleStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 AmpsMade in the USA
9-1658Dp2Alu Led White All-Round Light-Fixed Mount, 12" - 1658Dp2Alu - 9-1658Dp2Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer Top and base with clear frosted lens3/4" Aluminum tube poleStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 Amps
9-1659Dp0Alu Tower Mount Led White All-Round Light, 4" - 1659Dp0Alu - 9-1659Dp0Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer top and base with clear frosted lens3/4" aluminum tube poleStylish high-tech design with self contained LED module. LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR-2nmScrew Size: #81.28 Watts, 0.10 ampsMade in the USA
9-1670Dp0Alu Led White-All Round Light, Fold-Down Mount, 14" - 1670Dp0Alu - 9-1670Dp0Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polymer Top and Base with Clear Frosted Lens3/4" silver aluminum polesStylish high-tech design with self-contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmIncludes both vertical mount base (installed) and a horizontal baseScrew Size: #81.28 Watts. 0.10 AmpsMade in the USA
9-1670Dp2Alu Led White-All Round Light, Fold-Down Mount, 24" - 1670Dp2Alu - 9-1670Dp2Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polymer Top and Base with Clear Frosted Lens3/4" silver aluminum polesStylish high-tech design with self-contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmIncludes both vertical mount base (installed) and a horizontal baseScrew Size: #81.28 Watts. 0.10 AmpsMade in the USA
9-1672Dp0Alu Led White All-Round Led Light, Adjustable Folding Mount, 14" - 1672Dp0Alu - 9-1672Dp0Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility Polymer Top and Base with Clear Frosted Lens3/4" aluminum tube pole with quick adjustable baseStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 AmpsMade in the USA
9" X 12" Trim Tab Kit W/Led Indicator Switch - 15108-103 - 622-15108103F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14". Kit Includes: Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardwareSwitch KitSwitch Kit
9", 5 Wire Heavy Duty Roller Frame - 92141 - 50-92141F1
Plated rodsPlastic threaded handleDiameter: 1-1/2"
Ac Soft Starter Marine Softstart Marine - Ssm6T - 718-Ssm6Tf1
Acr 1951 Rcl-100 Led Remote Controlled Searchlight - 1951 - 33-1951F1
The RCL-100 LED continues to utilize the same rugged design as the original RCL-100, but incorporates an efficient 9 LED array that produces over 220,000 candela of light. The die cast aluminum housing and glass lens are sealed against the elements for years of trouble-free operation. Other features include a wired remote control operation that allows users to rotate the light 360° continuously at either a fast or slow speed without the hassle of a hard stop. With a 7° beam angle, the light also provides elevation angles at 9° up and 17° down to make lighting draw bridges, buoys and docks a breeze.
Acr 1957 Rcl-85 Led Searchlight - 1957 - 33-1957F1
For the boater who wants to ditch the hassle of halogen searchlights, but still wants affordability. With an impressive 240,000 candelas using 6 High Flux (30W) LEDs, you have visibility over 1/2 of a nautical mile to light the way to your destination. The simple installation only requires running power to the searchlight, all operations are completely wireless.
Acr C-Light™ H20 Water Activated Personal Distress Light - 3962.1 - 33-39621F1
For location assistance during low-light emergencies Exceedingly bright 20 Lumen White LEDExtensive continuous operating life of greater than 30 hoursWaterproof - Tested for 24 hrs at 3.3 ft. (1m)Water activation sensors - Automatic activation when in contact with waterImpact resistant caseUses two AA 1.5V batteries (not included)USCG/SOLAS ApprovedIdeal for life jackets, camping, biking, auto, etc.Included Velcro° strap (with carded version) used in conjunction with integral lashing loops for mounting flexibilityIncluded PFD clip (with carded version) for easy attachment to oral inflation tube
Acr C-Strobe™ H20 Water Activated Personal Distress Strobe Light - 3964.1 - 33-39641F1
For location assistance during low-light emergencies 3 Modes Strobe, Steady-On, and SOSExceedingly bright 45 Lumen White LEDExtensive continuous operating life of greater than 120 hours (strobe mode)Waterproof - Tested for 24 hrs at 3.3 ft. (1m)Water activation sensors - Automatic activation when in contact with waterImpact resistant caseUses two AA 1.5V batteries (not included)USCG/SOLAS ApprovedIdeal for life jackets, camping, biking, auto, etc.Included Velcro® strap (with carded version) used in conjunction with integral lashing loops for mounting flexibilityIncluded PFD clip (with carded version) for easy attachment to oral inflation tube
Acr Led C-Light™ Personal Distress Light - 3963.1 - 33-39631F1
The manually activated C-Light is a feature rich personal distress light that combines intense LED technology with increased operating life to provide you with the ultimate steady-on distress light. The C-Light is USCG/SOLAS approved and features an impact resistant case making it a reliable, multi-purpose light whenever efficient distress lighting is needed.
Acr Led C-Strobe™ Personal Distress Light - 3965.1 - 33-39651F1
The LED C-Strobe is a manually activated personal distress strobe light with dramatically improved operating life. This rugged little waterproof light is USCG/SOLAS approved and has a 45 lumen LED that operates typically for 120 hours continuously. The C-Strobe is activated manually with an easy twist On/Off activation making this an ideal light for all outdoor enthusiasts.
Acse Q0452 Light Yellow Awlmix Tint Full Can - Oq0452/1Qtus - 98-Kq0452Qf1
Add-A-Battery (Dual Circuit System) - 7650-Bss - 661-7650F1
Simplifies switching and automates charging for a complete two battery bank solution. The package includes
Airhead 012301Wi X4 Underwater Led Light, Ultra White-White Bezel - 012301Wi - 812-012301Wif1
With a wide choice of sizes and colours, the X-Series offers a range of mounting and colour options to help create your perfect light show and enjoy more time on the water. Fantastic for fishing or having fun with family and friends. With a choice of sizes and colours, the X-Series range is simple to install and use allowing you to enjoy more time on the water. Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. As part of our continuous strive for delivering the highest quality products to our customers, the X-Series is now certified to the highest achievable rating of protection against water ingress, also known as IP69k. The X-Series can also be used as an exterior light for your cockpit, deck or trailer. Fantastic for fishing or having fun with family and friends60° circular beam angle allows for a variety of mounting orientations maintaining light spreadBuilt-in driver, ultra low power draw, no start-up current required, reverse polarity protectionIP69k CertifiedFish-Strobe ModeActive Thermal Control
Airhead 012302Bi X4 Underwater Led Light, Midnight Blue-White Bezel - 012302Bi - 812-012302Bif1
With a wide choice of sizes and colours, the X-Series offers a range of mounting and colour options to help create your perfect light show and enjoy more time on the water. Fantastic for fishing or having fun with family and friends. With a choice of sizes and colours, the X-Series range is simple to install and use allowing you to enjoy more time on the water. Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. As part of our continuous strive for delivering the highest quality products to our customers, the X-Series is now certified to the highest achievable rating of protection against water ingress, also known as IP69k. The X-Series can also be used as an exterior light for your cockpit, deck or trailer. Fantastic for fishing or having fun with family and friends60° circular beam angle allows for a variety of mounting orientations maintaining light spreadBuilt-in driver, ultra low power draw, no start-up current required, reverse polarity protectionIP69k CertifiedFish-Strobe ModeActive Thermal Control
Airhead 012307Ci X8 Underwater Led Light, Colours-White Bezel - 012307Ci - 812-012307Cif1
With a wide choice of sizes and colours, the X-Series offers a range of mounting and colour options to help create your perfect light show and enjoy more time on the water. Fantastic for fishing or having fun with family and friends. With a choice of sizes and colours, the X-Series range is simple to install and use allowing you to enjoy more time on the water. Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. As part of our continuous strive for delivering the highest quality products to our customers, the X-Series is now certified to the highest achievable rating of protection against water ingress, also known as IP69k. The X-Series can also be used as an exterior light for your cockpit, deck or trailer. Fantastic for fishing or having fun with family and friends60° circular beam angle allows for a variety of mounting orientations maintaining light spreadBuilt-in driver, ultra low power draw, no start-up current required, reverse polarity protectionIP69k CertifiedFish-Strobe ModeActive Thermal Control
Airhead 012308Wi X16 Underwater Led Light, Ultra White-White Bezel - 012308Wi - 812-012308Wif1
With a wide choice of sizes and colours, the X-Series offers a range of mounting and colour options to help create your perfect light show and enjoy more time on the water. Fantastic for fishing or having fun with family and friends. With a choice of sizes and colours, the X-Series range is simple to install and use allowing you to enjoy more time on the water. Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. As part of our continuous strive for delivering the highest quality products to our customers, the X-Series is now certified to the highest achievable rating of protection against water ingress, also known as IP69k. The X-Series can also be used as an exterior light for your cockpit, deck or trailer. Fantastic for fishing or having fun with family and friends60° circular beam angle allows for a variety of mounting orientations maintaining light spreadBuilt-in driver, ultra low power draw, no start-up current required, reverse polarity protectionIP69k CertifiedFish-Strobe ModeActive Thermal Control
Airhead 012309Bi X16 Underwater Led Light, Midnight Blue-White Bezel - 012309Bi - 812-012309Bif1
With a wide choice of sizes and colours, the X-Series offers a range of mounting and colour options to help create your perfect light show and enjoy more time on the water. Fantastic for fishing or having fun with family and friends. With a choice of sizes and colours, the X-Series range is simple to install and use allowing you to enjoy more time on the water. Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. As part of our continuous strive for delivering the highest quality products to our customers, the X-Series is now certified to the highest achievable rating of protection against water ingress, also known as IP69k. The X-Series can also be used as an exterior light for your cockpit, deck or trailer. Fantastic for fishing or having fun with family and friends60° circular beam angle allows for a variety of mounting orientations maintaining light spreadBuilt-in driver, ultra low power draw, no start-up current required, reverse polarity protectionIP69k CertifiedFish-Strobe ModeActive Thermal Control
Airhead 012311Ci X16 Underwater Led Light, Colours-White Bezel - 012311Ci - 812-012311Cif1
With a wide choice of sizes and colours, the X-Series offers a range of mounting and colour options to help create your perfect light show and enjoy more time on the water. Fantastic for fishing or having fun with family and friends. With a choice of sizes and colours, the X-Series range is simple to install and use allowing you to enjoy more time on the water. Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. As part of our continuous strive for delivering the highest quality products to our customers, the X-Series is now certified to the highest achievable rating of protection against water ingress, also known as IP69k. The X-Series can also be used as an exterior light for your cockpit, deck or trailer. Fantastic for fishing or having fun with family and friends60° circular beam angle allows for a variety of mounting orientations maintaining light spreadBuilt-in driver, ultra low power draw, no start-up current required, reverse polarity protectionIP69k CertifiedFish-Strobe ModeActive Thermal Control
Airhead Ahkc1 Kwik-Connect Tow Rope Connector - Ahkc-1 - 253-Ahkc1F1
Conveniently attach and detach tube tow ropes to towables with AIRHEAD's Kwik-Connect. there's no need to thread 60 feet of rope through the tow strap each time you connect or disconnect a tow rope. The high impact Kwik-Connect has a 1 inch diameter hole to accept up to 6,000 lb. break strength tube ropes. Recommended for 1 to 4 rider towables that are not equipped with Kwik-Connects.
Airhead E2002B Explore E2 Xfm Underwater Led Light , Narrow Beam, Midnight Blue - E2002B - 812-E2002Bf1
The new Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Narrow 'laser' beam shape (20° Circular), for focused, penetrating beam. Offers the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights via the 3rd party switch or push button of your choice.
Airhead E2002W Explore E2 Xfm Underwater Led Light , Narrow Beam, Ultra White - E2002W - 812-E2002Wf1
The new Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Narrow 'laser' beam shape (20° Circular), for focused, penetrating beam. Offers the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights via the 3rd party switch or push button of your choice.
Airhead E2009B Explore E2 Xfm Underwater Led Light , Wide Beam, Midnight Blue - E2009B - 812-E2009Bf1
The new Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Wide angle beam (90° x 20° Elliptical) for broad coverage. Offers the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights via the 3rd party switch or push button of your choice.
Airhead E2009W Explore E2 Xfm Underwater Led Light , Wide Beam, Ultra White - E2009W - 812-E2009Wf1
The new Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Wide angle beam (90° x 20° Elliptical) for broad coverage. Offers the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights via the 3rd party switch or push button of your choice.
Airhead Pls000017 X-Series Bezel For X16, Black - Pls-000017 - 812-Pls000017F1
Black Plastic Bezel
Airhead Pls000107 X-Series Bezel For X8, Black - Pls-000107 - 812-Pls000107F1
Black Plastic Bezel
Airhead Pls000108 X-Series Bezel For X4, Black - Pls-000108 - 812-Pls000108F1
Black Plastic Bezel
Alkaline Batteries, Aaa Size - Pc2400 - 711-Pc2400F1
All-Rd Pole Light White Horz Mt - 1134Dp0Chr - 9-1134Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Height: 14". 12V bulb included. Screw size is 8.
All-Rd Pole Light White Vert Mt - 1137Dp0Chr - 9-1137Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Height: 14". 12V bulb included. Screw size is 8.
All-Round Light Fold-Down Mt - 1634Dp0Chr - 9-1634Dp0Chrf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top with clear fluted lens and frosted globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. 12V bulbs included. Screw size is 8.
All-Round Light Fold-Down Mt - 1637Dp0Chr - 9-1637Dp0Chrf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top with clear fluted lens and frosted globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. 12V bulbs included. Screw size is 8.
Allure Led Reading Light - 41397P - 390-41397Pf1
304 Stainless steel LED reading light with on/off switch. The light also swivels and features an adjustable angle. Dimmable (with LED dimmer not included)Adjustable swivel lightOn/off rocker switch1 x 3.0 Watt LED160 Lumens10-30 VDCBeam Angle 110°LED Lifetime: 50,000 hours
Alt F/Outboard Mercury Engines - 20851 - 57-20851F1
Alt F/Outboard Motor/Starter Mercury Marine - 20852 - 57-20852F1
Alternator - 18-5882 - 47-5882F1
See Sierra's catalog for current application information.
Alternator - 18-5960 - 47-5960F1
See Sierra's catalog for current application information.
Alternator - 18-6261 - 47-6261F1
See Sierra's catalog for current application information.
Alternator - 18-6293 - 47-6293F1
See Sierra's catalog for current application information.
Alternator - 18-6975 - 47-6975F1
High amp 160A alternator, universal mounting pattern based on Delco CS1300 design. V-belt and 6 groove serpentine pullies included.
Alternator - 20102 - 57-20102F1
12 volt - 70 amp Self excitingIgnition protection screens internal regulator, negative ground and single groove pulley
Alternator - 20104 - 57-20104F1
12 volt - 70 amp Self excitingIgnition protection screens internal regulator, negative ground and single groove pulley
Alternator - Universal - 60075 - 57-60075F1
O.E.M. Universal alternator w/ many applicationsFits: Yamaha, Marine Power, CrusaderReplaces: Motorola 12 Volt, 55 Amp, Internal regulatorIncludes: Tachometer terminal, indicator light terminal, remote battery sensing terminal 1-inch mounting foot & 3-ear adjustment.Single groove pulley included.
Alternator 1 Wire Fit Gm Mercruiser 55Amp - 18-5966-1 - 47-59661F1
Alternator 1 Wire Fit Gm Mercruiser 68Amp - 18-5956-1 - 47-59561F1
Alternator 3 Wire Fit Gm Mercruiser 68Amp - 18-5957-1 - 47-59571F1
Alternator 70A,Gm V6& V8 - 862031T1 - 710-862031T1F1
Alternator Conversion Kit - 18-5953-1 - 47-59531F1
Includes new 68 AMP alternator, mounting brackets 18-5968, pulley, wiring, hardware and instructions. Converts model 470 aluminum block Mercruiser engines serial number 4625580 & up with stator charging system and water cooled voltage regulator to alternator system. NOTE: Fuse kit 18-8220 (sold separately) is required on engines with a Delco starter (round solenoid mounted to starter); Prestolite starters with remote solenoid DO NOT require fuse kit. Visually inspect starter prior to ordering conversion kit.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 60Yp100Sv - 684-60Yp100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 60Yp70Sv - 684-60Yp70Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley. YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 621Vup70Sv - 684-621Vup70Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley. VUP models: Fit engines using a 1" or 2" single foot (spool) mount for many 4.3-5.7L Mercruiser, Volvo Penta, Pleasurecraft, Crusader & other GM gas, Volvo, Cummins, Yanmar 6LP, Westerbeke diesels with Delco & Motorola-equipped alternators.
Alternator Pleasurecraft - 20822 - 57-20822F1
Fits: Pleasurecraft RA097007C Replaces: Delco 840002765mm serpentine pully
Alternator Term L/Washer@5 - 21272 - 710-13-21272F1
Alternator V-6 O/B - 8M0064020 - 710-8M0064020 Superseded By: 710-8M6013461F1
Alternator V-6 O/B Ss<8M0064020 - 8M6013461 - 710-8M6013461F1
Alternator, Dual Foot (3.15"), Isogrd - 60100Sv - 684-60100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator, Dual Foot (3.15"), Isogrd - 60120Dv - 684-60120Dvf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator, Dual Foot (3.15), Isogrd - 60-24-70-Dv - 684-602470Dvf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.YP models: Fit engines using a 3.15 ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator, Single Foot (1"-2"), Isogrd - 621-100-Sv - 684-621100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.VUP models: Fit engines using a 1" or 2" single foot (spool) mount for many 4.3-5.7L Mercruiser, Volvo Penta, Pleasurecraft, Crusader & other GM gas, Volvo, Cummins, Yanmar 6LP, Westerbeke diesels with Delco & Motorola-equipped alternators.
Ancor 10 Piece Assorted Heat Shrink Butt Connectors Ranging From 22 To 10 Awg - 300000 - 639-300000F1
Features the most popular 22-10 ga. heat shrink connectors.
Ancor 100010 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Black - 100010 - 639-100010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100025 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 250', Black - 100025 - 639-100025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100050 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 500', Black - 100050 - 639-100050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100110 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Dark Blue - 100110 - 639-100110F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100310 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Green - 100310 - 639-100310F1
Ancor 100410 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Gray - 100410 - 639-100410F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100510 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Orange - 100510 - 639-100510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100810 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Red - 100810 - 639-100810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100850 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 500', Red - 100850 - 639-100850F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100910 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', White - 100910 - 639-100910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 101010 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Yellow - 101010 - 639-101010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 101810 Marine Grade™ Tinned Copper Primary Wire, #16 Awg, 100', Tan - 101810 - 639-101810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102010 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Black - 102010 - 639-102010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102025 Marine Grade™ Tinned Copper Primary Wire, #16 Awg, 250', Black - 102025 - 639-102025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102050 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 500', Black - 102050 - 639-102050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102099 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 1000', Black - 102099 - 639-102099F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102110 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Blue - 102110 - 639-102110F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102210 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Brown - 102210 - 639-102210F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102310 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Green - 102310 - 639-102310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102410 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Gray - 102410 - 639-102410F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102510 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Orange - 102510 - 639-102510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102610 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Pink - 102610 - 639-102610F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102710 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Purple - 102710 - 639-102710F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102810 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Red - 102810 - 639-102810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102825 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 250', Red - 102825 - 639-102825F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102850 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 500', Red - 102850 - 639-102850F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102899 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 1000', Red - 102899 - 639-102899F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 102910 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', White - 102910 - 639-102910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 103010 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 100', Yellow - 103010 - 639-103010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 103050 Marine Grade® Tinned Copper Primary Wire, #16 Awg, 500', Yellow - 103050 - 639-103050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 103810 Marine Grade™ Tinned Copper Primary Wire, #14 Awg, 100', Tan - 103810 - 639-103810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 103910 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Light Blue - 103910 - 639-103910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104010 Marine Grade™ Tinned Copper Primary Wire, #14 Awg, 100', Black - 104010 - 639-104010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104025 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 250', Black - 104025 - 639-104025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104050 Marine Grade™ Tinned Copper Primary Wire, #14 Awg, 500', Black - 104050 - 639-104050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104099 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 1000', Black - 104099 - 639-104099F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104110 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Blue - 104110 - 639-104110F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104210 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Brown - 104210 - 639-104210F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104310 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Green - 104310 - 639-104310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104350 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 500', Green - 104350 - 639-104350F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104410 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Gray - 104410 - 639-104410F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104510 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Orange - 104510 - 639-104510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104610 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Pink - 104610 - 639-104610F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104710 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Purple - 104710 - 639-104710F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104810 Marine Grade™ Tinned Copper Primary Wire, #14 Awg, 100', Red - 104810 - 639-104810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104825 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 250', Red - 104825 - 639-104825F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104850 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 500', Red - 104850 - 639-104850F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104899 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 1000', Red - 104899 - 639-104899F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 104910 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', White - 104910 - 639-104910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 105010 Marine Grade® Tinned Copper Primary Wire, #14 Awg, 100', Yellow - 105010 - 639-105010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 105810 Marine Grade™ Tinned Copper Primary Wire, #12 Awg, 100', Tan - 105810 - 639-105810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106010 Marine Grade™ Tinned Copper Primary Wire, #12 Awg, 100', Black - 106010 - 639-106010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106025 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 250', Black - 106025 - 639-106025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106040 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 400', Black - 106040 - 639-106040F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106110 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 100', Blue - 106110 - 639-106110F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106210 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 100', Brown - 106210 - 639-106210F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106310 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 100', Green - 106310 - 639-106310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106810 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 100', Red - 106810 - 639-106810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106825 Marine Grade™ Tinned Copper Primary Wire, #12 Awg, 250', Red - 106825 - 639-106825F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106840 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 400', Red - 106840 - 639-106840F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 106910 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 100', White - 106910 - 639-106910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 107010 Marine Grade® Tinned Copper Primary Wire, #12 Awg, 100', Yellow - 107010 - 639-107010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108002 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 25', Black - 108002 - 639-108002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108010 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', Black - 108010 - 639-108010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108025 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 250', Black - 108025 - 639-108025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108110 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', Blue - 108110 - 639-108110F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108310 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', Green - 108310 - 639-108310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108325 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 250', Green - 108325 - 639-108325F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108510 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', Orange - 108510 - 639-108510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108802 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 25', Red - 108802 - 639-108802F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108810 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', Red - 108810 - 639-108810F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108825 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 250', Red - 108825 - 639-108825F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108850 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 500', Red - 108850 - 639-108850F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 108910 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', White - 108910 - 639-108910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 109010 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 100', Yellow - 109010 - 639-109010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 109025 Marine Grade® Tinned Copper Primary Wire, #10 Awg, 250', Yellow - 109025 - 639-109025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111002 Marine Grade™ Tinned Copper Battery Cable, #8 Awg, 25', Black - 111002 - 639-111002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111005 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 50', Black - 111005 - 639-111005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111010 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Black - 111010 - 639-111010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111025 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 250', Black - 111025 - 639-111025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111050 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 500', Black - 111050 - 639-111050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111302 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 25', Green - 111302 - 639-111302F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111305 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 50', Green - 111305 - 639-111305F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111310 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Green - 111310 - 639-111310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111325 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 250', Green - 111325 - 639-111325F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111505 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 50', Red - 111505 - 639-111505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111510 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Red - 111510 - 639-111510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111525 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 250', Red - 111525 - 639-111525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111550 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 500', Red - 111550 - 639-111550F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111710 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', White - 111710 - 639-111710F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 111910 Marine Grade® Tinned Copper Battery Cable, #8 Awg, 100', Yellow - 111910 - 639-111910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112002 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 25', Black - 112002 - 639-112002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112005 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Black - 112005 - 639-112005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112010 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Black - 112010 - 639-112010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112025 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 250', Black - 112025 - 639-112025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112050 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 500', Black - 112050 - 639-112050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112305 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Green - 112305 - 639-112305F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112310 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Green - 112310 - 639-112310F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112325 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 250', Green - 112325 - 639-112325F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112502 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 25', Red - 112502 - 639-112502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112505 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Red - 112505 - 639-112505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112510 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Red - 112510 - 639-112510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112525 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 250', Red - 112525 - 639-112525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112710 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', White - 112710 - 639-112710F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112905 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 50', Yellow - 112905 - 639-112905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 112910 Marine Grade® Tinned Copper Battery Cable, #6 Awg, 100', Yellow - 112910 - 639-112910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113002 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 25', Black - 113002 - 639-113002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113005 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 50', Black - 113005 - 639-113005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113010 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 100', Black - 113010 - 639-113010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113025 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 250', Black - 113025 - 639-113025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113050 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 500', Black - 113050 - 639-113050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113505 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 50', Red - 113505 - 639-113505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113510 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 100', Red - 113510 - 639-113510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113525 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 250', Red - 113525 - 639-113525F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113550 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 500', Red - 113550 - 639-113550F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113905 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 50', Yellow - 113905 - 639-113905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 113910 Marine Grade® Tinned Copper Battery Cable, #4 Awg, 100', Yellow - 113910 - 639-113910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114002 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 25', Black - 114002 - 639-114002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114005 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 50', Black - 114005 - 639-114005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114010 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 100', Black - 114010 - 639-114010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114025 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 250', Black - 114025 - 639-114025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114040 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 400', Black - 114040 - 639-114040F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114502 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 25', Red - 114502 - 639-114502F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114505 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 50', Red - 114505 - 639-114505F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114510 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 100', Red - 114510 - 639-114510F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114540 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 400', Red - 114540 - 639-114540F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114902 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 25', Yellow - 114902 - 639-114902F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114905 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 50', Yellow - 114905 - 639-114905F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 114910 Marine Grade® Tinned Copper Battery Cable, #2 Awg, 100', Yellow - 114910 - 639-114910F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115002 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 25', Black - 115002 - 639-115002F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115005 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 50', Black - 115005 - 639-115005F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 115010 Marine Grade® Tinned Copper Battery Cable, #1 Awg, 100', Black - 115010 - 639-115010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
