Select Category
Engine & Fuel
Shift Shaft Oil Seal O/B Ss<26-816464 1 - 8M0204708 - 710-26-8M0204708F1
Shift Shaft Bushing Oil Seal - 892361 - 710-26-892361F1
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1125 - 88-3551125F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1124 - 88-3551124F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1123 - 88-3551123F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1120S - 88-3551120F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 350 Fuel Fill Hose - 16-350-2004 - 88-3502004F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 350 Fuel Fill Hose - 16-350-2003 - 88-3502003F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 350 Fuel Fill Hose - 16-350-1783 - 88-3501783F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Fire Acol Series 369 Fuel Vent Hose - 5/8" Id & 31/32" Od - 50# Working Pressure - 16-369-0586 - 88-3690586F1
Meets USCG SAE J1527 Type A2. Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). For pleasure boats.ISO 7840 Type A2NMMA/CE type acceptedTemperature range: -20°F to 160°F
Shields Marine Type A2 Fire Acol Series 369 Fuel Vent Hose - 5/8" Id & 31/32" Od - 50# Working Pressure - 16-369-0585 - 88-3690585F1
Meets USCG SAE J1527 Type A2. Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). For pleasure boats.ISO 7840 Type A2NMMA/CE type acceptedTemperature range: -20°F to 160°F
Shields Marine Type A2 Fire Acol Series 369 Fuel Vent Hose - 5/8" Id & 31/32" Od - 50# Working Pressure - 16-369-0583 - 88-3690583F1
Meets USCG SAE J1527 Type A2. Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). For pleasure boats.ISO 7840 Type A2NMMA/CE type acceptedTemperature range: -20°F to 160°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0566 - 88-3680566F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0565 - 88-3680565F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0563 - 88-3680563F1
SAE J1527 Type A1-15Low Permeation Marine Fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced hose complies with EPA and CARB very low permeation requirements and is weather/ UV resistant. This hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels, diesel, all bio-diesel blends). It meets USCG Type A1 - 15 requirements for pleasure boats. Temperature ranges from -20°F to 212°F. 2 year emission performance warranty.
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0386 - 88-3680386F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0385 - 88-3680385F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0383 - 88-3680383F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0380S - 88-3680380F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0146 - 88-3680146F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0145 - 88-3680145F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0126 - 88-3680126F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0125 - 88-3680125F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Silverado 2000 Type B2 Outboard Fuel & Vent Series 315 Hose | 5/8" Id & 29/32" Od - 16-315-0586 - 88-3150586 Superseded By: 88-3690586F1
Premium quality fuel hose designed for outboard feed and vent lines for pleasure craft. Outside engine compartment use only. Features UV resistant, all rubber construction, low temperature flexibility (-5° F to 180° F) superior weather resistance, and resistance to gasoline/alcohol blends. Complies with SAE J1527 Type B2 specifications. EPA regulations do not allow use of this product in new detachable fuel line assemblies.
Shields Marine 116-351-1123 Corrugated Fire Acol "C" Fuel Fill Hose - 16-351-1123 - 88-3511123F1
Shields Fire-Acol "C" Fuel Fill Hose resists gasoline/alcohol blends and has a corrugated cover for extra flexibility. This hose is compounded for low permeation and is reinforced with a wire helix imbedded between plies of HD synthetic cord. It is also abrasion resistant. This hose is primarily used for extra flexible fuel fill (gas or diesel) and is for pleasure boats only. The temperature range is -5°F to 180°F. It meets SAE J1527 type A2 and NMMA Type Accepted standards.
Shields 3370566 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 50' - 16-337-0566 - 88-3370566F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370565 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 25' - 16-337-0565 - 88-3370565F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370563 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 10' - 16-337-0563 - 88-3370563F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370560 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 250' - 16-337-0560S - 88-3370560F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370386 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 50' - 16-337-0386 - 88-3370386F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370385 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 25' - 16-337-0385 - 88-3370385F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 10' - 16-337-0383 - 88-3370383F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370380 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 250' - 16-337-0380S - 88-3370380F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370146 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 50' - 16-337-0146 - 88-3370146F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370143 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 10' - 16-337-0143 - 88-3370143F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 16375038036D Fuel Feed Line With Fire Sleeve, 3/8" X 3' - 16-375-038036D - 88-16375038036Df1
Stainless Steel Braided PTFE hose is an ideal choice for marine applications. Straight quick connector and fire sleeveExtreme reliability and longer service life-60°C to +260°C Operating Temperature RangesNot affected by heat, aging, Ozone or UV exposureCompatible with a wide range of chemicals and additivesDesigned to dissipate any potential static charges for added safetyCFR 33 USCG and SAE J1527 approvedUltra Low Permeation
Sherwood Gc501 Cummins Seawater Pump - Gc5-01 - 762-Gc501F1
Impeller Kit: 15000K Minor Repair Kit: 23980Major Repair Kit 23981
Sherwood Gc101 Cummins Seawater Pump - Gc1-01 - 762-Gc101F1
Impeller Kit: 15000K Minor Repair Kit: 23980Major Repair Kit 23981
Sherwood 19674 Replacement Seal - 19674 - 762-19674F1
Replacement Seal
Sherwood 15955S Replacement Seal - 15955S - 762-15955Sf1
Replacement Seal
Shell Rotella® T5 Synthetic Blend Diesel Engine Oil - 550045130 - 258-550045130F1
Shell ROTELLA® T5 10W-30 Synthetic Blend Technology has been enhanced with synthetic base oils, plus advanced additive technology to provide Triple Protection® that adapts to your driving conditions. ROTELLA® T5 oil meets or exceeds all API CK-4 specifications and is fully backwards compatible with engines requiring API CJ-4 designated oil. Excellent wear protectionExceptional deposit control/cleanlinessExcellent protection against oil breakdownSustained emission control system durability in particulate filters and after-treatment systemsImproved fuel economyImproved low temperature flow Priced each, sold in case packs only
Shell 550054467 Rotella T1 Diesel Engine Oil, 40W 5 Liters, 3/Case - 550054467 - 852-550054467F1
Rotella® T1 is an easy-flow single grade oil provides quality lubrication, consistent performance and excellent wear protection in diesel engines. Low ash content to minimize formation of deposits and to help keep intake ports clean. Outstanding oxidation resistance to help maximize service life. Excellent rust and corrosion protection. Optimized dispersants to help prevent engine sludge and varnish deposits. Sold in case packs only.
Shell 550054460 Rotella T1 Diesel Engine Oil, 30W 5 Liters, 3/Case - 550054460 - 852-550054460F1
Rotella® T1 is an easy-flow single grade oil provides quality lubrication, consistent performance and excellent wear protection in diesel engines. Low ash content to minimize formation of deposits and to help keep intake ports clean. Outstanding oxidation resistance to help maximize service life. Excellent rust and corrosion protection. Optimized dispersants to help prevent engine sludge and varnish deposits. Sold in case packs only.
Shell 550049481 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 946Ml, 6/Case - 550049481 - 852-550049481F1
With millions of miles of real world testing, Shell Rotella® T4 Triple Protection° oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shell 550049479 Rotella® T6 Synthetic Heavy Duty Diesel Engine Oil, 5W-40, Qt - 550049479 - 258-550049479F1
The Energized Protection® of Shell Rotella® heavy duty diesel engine oil controls acid, deposit and wear. Maximum protection, delivering better wear protection and fuel economy.Sold in case packs only.
Shell 550045148 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 208.2L - 550045148 - 852-550045148F1
With millions of miles of real world testing, Shell Rotella® T4 Triple Protection° oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines.
Shell 550045135 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 5L, 3/Case - 550045135 - 852-550045135F1
With millions of miles of real world testing, Shell ROTELLA® T4 Triple Protection® oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shell 550045128 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 18.9L, 2/Case - 550045128 - 852-550045128F1
With millions of miles of real world testing, Shell ROTELLA® T4 Triple Protection® oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shell 550045125 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 9.5L, 2/Case - 550045125 - 852-550045125F1
With millions of miles of real world testing, Shell ROTELLA® T4 Triple Protection® oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shaft Seal Tee Kit 3/4 Replaces P/N 730-07Kit034 - 07Kit034 - 752-07Kit034F1
Shaft Outer Prop Ss<805074A 2 - 865315A02 - 710-44-865315A02F1
Serpentine Belt Ss<57-865615010 - 865615Q10 - 710-57-865615Q10F1
Serpentine Belt Ss<57-865615009 - 865615Q09 - 710-57-865615Q09F1
Serpentine Belt Ss<57-861757 - 861757Q - 710-57-861757Qf1
Serpentine Belt 496 Mag Ss<57-865615002 - 865615Q02 - 710-57-865615Q02F1
Serpentine Belt 454/502 Ss>57-865615007 - 865615Q07 - 710-57-865615Q07F1
Serpentine Belt 2649 Mm Ss<57-861049 - 861049Q - 710-57-861049Qf1
Serpentine Belt 2535Mm Ss<57-865615008 - 865615Q08 - 710-57-865615Q08F1
Serpentine Belt 2519 Mm Ss<57-865635001 - 865635Q01 - 710-57-865635Q01F1
Serpentine Belt 2285Mm Ss<865635002 - 865635Q02 - 710-57-865635Q02F1
Serpentine Belt - 18-15121 - 47-15121F1
See Sierra catalog for complete application information.
Serpentine Belt - 18-15103 - 47-15103F1
See Sierra catalog for complete application information.
Serp Belt 2233Mm Ss<57-865615005 - 865615Q05 - 710-57-865615Q05F1
Self Adhesive Filter Vent 4" X 5", Black - Ds-683F - 315-Ds683Ff1
The DS683F Weather-Tight Filter Vent uses a filter pad inside the vent top to keep dust, bugs, dirt and other debris out of shrink wrapped products. Identical to the standard DS-683 vent, the DS-683F Filter Vent is easy to install, inexpensive, versatile, has a replaceable filter, and works in any climate. Weather tight, self adhesive vent. Removable top for easy installation. Pre-installed filter included. Vents should be applied to warm shrunk film to stick properly.
Seawater Pump Oil Seal Ss<26-8M2001645 - 8M0146317 - 710-26-8M0146317F1
Seawater Pump O-Ring @ 5 Ss<25-33465 - 8M0214925 - 710-25-8M0214925F1
Seawater Pump Impeller 2.0L - 879312025 - 710-47-879312025F1
Seastar Pro Front Pivot Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hs5157 Seal Kit - Hc6345-3 - 1-Hc63453F1
The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Systems require the use of a SeaStar Pro helm and reinforced Kevlar hoses only(1500 psi).All cylinders ending in "3" have been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Hs5161 Seal Kit - Fits Select Capilano Helm Pumps - Hs5161 - 1-Hs5161F1
Seal Kit
Seastar Hs5151 Seal Kit - Fits 1984 - 1990 Helms - Hs5151 - 1-Hs5151F1
SeaStar HS5151 Seal Kit - Fits 1984 - 1990 Helms.
Seastar Hp6160 Gland Seal Kit - Hp6160 - 1-Hp6160F1
Gland Seal Kit
Seastar Hp6032 Seal Kit - Fits Most Seastar, Seastar Pro, Baystar & Baystar Plus Models - Hp6032 - 1-Hp6032F1
Service Kit For Newer Style Baystar Helms
Seastar Hp5608 Baystar Gland / Seal Kit For Outboard Cylinder, Starboard Side - Hp5608 - 1-Hp5608F1
Complete assembled end gland with replacement retaining wire.
Seastar Hp5607 Baystar Gland / Seal Kit For Outboard Cylinder, Port Side - Hp5607 - 1-Hp5607F1
Complete assembled end gland with replacement retaining wire.
Seastar Hp4601 Baystar Orb Gland / Seal Kit For Outboard Cylinder - Hp4601 - 1-Hp4601F1
Gland/Seal kit
Seastar Hp4600 Gland / Seal Kit For Hydraulic Cylinder, Fits Hc4645H/Hc4647H/Hc4648H/Hc4658H - Hp4600 - 1-Hp4600F1
For use with BayStar Compact Cylinders: HC4645H, HC4647H, HC4648H & HC4658H.Includes: 1 Wiper1 Shaft Seal1 O-Ring4 BHCS 1/4" NC x 1.5" SS1 Gland, Port Side1 Gland, Starboard Side1 Pivot plate1 Pivot plate
Seastar Hc6845S Tournament Series Front Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder | Hp6160 Seal Kit - Hc6845S - 1-Hc6845Sf1
Engineered to provide today's high-powered offshore tournament boats and other high-performance vessels with precise, smooth and reliable steering. This heavy-duty cylinder is designed to work with all new and existing Teleflex & Seastar Solutions SeaStar hydraulic helms, providing an instant steering upgrade for a wide variety of boats. Features a rugged design with heavy-duty support brackets, barrel, shaft and seals, together with superior corrosion resistance for serious sea duty. Each cylinder is universal, allowing a variety of mounting configurations, with single, dual or triple cylinder installations to match the outboards on the transom. Independent bleeder fittings allow for better and easier system bleeding compared to tee fittings, especially in multiple engine installations. Each cylinder is equipped with stainless steel ORB elbow fittings that can be easily oriented in any direction for easy and clean rigging of hydraulic steering hoses. Teleflex's new patent-pending pivot plate design are reversible from left to right and provide smooth articulation and sealed joints for superior performance.The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. There is no cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s). These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Hc6845 Tournament Series Front Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hp6160 Seal Kit - Hc6845 - 1-Hc6845F1
Engineered to provide today's high-powered offshore tournament boats and other high-performance vessels with precise, smooth and reliable steering. This heavy-duty cylinder is designed to work with all new and existing Teleflex & Seastar Solutions SeaStar hydraulic helms, providing an instant steering upgrade for a wide variety of boats. Features a rugged design with heavy-duty support brackets, barrel, shaft and seals, together with superior corrosion resistance for serious sea duty. Each cylinder is universal, allowing a variety of mounting configurations, with single, dual or triple cylinder installations to match the outboards on the transom. Independent bleeder fittings allow for better and easier system bleeding compared to tee fittings, especially in multiple engine installations. Each cylinder is equipped with stainless steel ORB elbow fittings that can be easily oriented in any direction for easy and clean rigging of hydraulic steering hoses. Teleflex's new patent-pending pivot plate design are reversible from left to right and provide smooth articulation and sealed joints for superior performance.The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. There is no cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
Seastar Hc6358-3 Pro Front Pivot Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hs5157 Seal Kit - Hc6358-3 - 1-Hc63583F1
The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Systems require the use of a SeaStar Pro helm and reinforced Kevlar hoses only(1500 psi).All cylinders ending in "3" have been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Hc5379 Capilano Inboard 11" Stroke 26 Cubic Inch Brass Cylinder - Model Ba 200-11 - Hs5185 Seal Kit - Hc5379 - 1-Hc5379F1
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
Seastar Hc5375-3 Front Mount Outboard 8" Stroke 8.34 Cubic Inch Catamaran Cylinder - Hs5157 Seal Kit - Hc5375-3 - 1-Hc53753F1
The SeaStar front mount pivot cylinder is for Catamaran designs. This cylinder will fit ALL engines that require HC5345 steering cylinder. The internal o-ring is designed to limit the amount of fluid bypass decreasing the amount of re-alignment. This cylinder is best used in applications that require a liquid tiebar.Cylinder ending in "3" has been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Hc5332 Sterndrive 7" Stroke 8.3 Cubic Inch Cylinder - Model Ba135-7Em - Hs5155 Seal Kit - Hc5332 - 1-Hc5332F1
Can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface.
Seastar Hc5328-3 Sterndrive 8" Stroke 8.3 Cubic Inch Cylinder | Model Ba125-8Em | Hs5154 Seal Kit - Hc5328-3 - 1-Hc53283F1
Can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface.
Seastar Hc5326-3 Sterndrive 7" Stroke 8.3 Cubic Inch Cylinder | Model Ba150-7Em | Hs5156 Seal Kit - Hc5326-3 - 1-Hc53263F1
Can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface.
Seastar Hc53193 Inboard 7" Stroke 13.7 Cubic Inch Cylinder - Model Ba175-7Tm - Hs5183 Seal Kit - Hc5319-3 - 1-Hc53193F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc5314-3 Inboard 7" Stroke 10.2 Cubic Inch Cylinder - Model Ba150-7Atm - Hp6025 Seal Kit - Hc5314-3 - 1-Hc53143F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Hc5312-3 Inboard 7" Stroke 7.2 Cubic Inch Cylinder - Model Ba125-7Atm - Hp6023 Seal Kit - Hc5312-3 - 1-Hc53123F1
These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.
Seastar Ha1201 Dual Ignition Control Kit Accessory For Power Assist - Ha1201 - 1-Ha1201F1
Power Assist Dual Ignition Control Kit
