Select Category
Engine & Fuel
Seachoice Brass Two Way Fuel Line Valve - 50-20741 - 50-20741F1
Brass Two Way Fuel Line Valve, 3/8 x 3/8 Female/Female NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Brass Two Way Fuel Line Valve - 50-20731 - 50-20731F1
Brass Two Way Fuel Line Valve, 1/4 x 1/4 Female/Female
Seachoice Brass Two Way Fuel Line Valve - 50-20721 - 50-20721F1
Brass Two Way Fuel Line Valve, 1/4 x 1/4 Male/Female
Seachoice Brass Three Way Fuel Line Valve - 50-20761 - 50-20761F1
Female ports BrassPositive lock with audible click NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Brass Three Way Fuel Line Valve - 50-20751 - 50-20751F1
Female ports BrassPositive lock with audible click
Seachoice Boat Fuel Gauge Kit, Includes Gauge And In-Tank Equipment - 50-15501 - 50-15501F1
This Seachoice Fuel Gauge Kit has everything you need to equip a boat with a fuel gauge and the in-tank equipment that will monitor fuel levels. This versatile kit can be used for gas or diesel. Made of non-ferrous materials, the tank equipment can be used with tanks ranging in depth from 6 inches to 27 inches. The mounting screws and gasket are included for sure installation, and the float arm can be rotated in 90° intervals to ensure that there's clearance with tank walls or baffles. The low-profile Fuel Gauge for 12V negative ground systems has a black bezel and a light kit so the fuel level is always visible. Not for dual station applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Can be used with petrol or dieselCombination of references 15421 and 15441Seachoice
Seachoice Black Poly Carb Deck Plate Key For 1-1/4" And 1-1/2" Deck Plates - 50-32651 - 50-32651F1
Black poly carb. Will fit 1-1/4" and 1-1/2" deck plates. Overall length: 3-3/8".
Seachoice 96901 Elastomeric White Marine Sealant, 10 Oz. - 50-96901 - 50-96901F1
For use below or above waterline Fast curing and permanently flexible: full cure in 1 to 7 days at 40°F to 130°FNon staining or saggingAdheres tenaciously to fiberglass, wood, metal, glass, plexiglass, Lexan and other plasticsSandable and paintableClean-up with mineral spiritsNot recommended for deck seams or areas in contact with gasoline Not available for sale in California.
Seachoice 96881 Elastomeric White Marine Sealant, 3 Oz. - 50-96881 - 50-96881F1
For use below or above waterline Fast curing and permanently flexible: full cure in 1 to 7 days at 40°F to 130°FNon staining or saggingAdheres tenaciously to fiberglass, wood, metal, glass, plexiglass, Lexan and other plasticsSandable and paintableClean-up with mineral spiritsNot recommended for deck seams or areas in contact with gasoline Not available for sale in California.
Seachoice 91989 Wet/Dry Silicone Carbide Paper, Grade: 2000 - 91989 - 50-91989F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91988 Wet/Dry Silicone Carbide Paper, Grade: 1500 - 91988 - 50-91988F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91987 Wet/Dry Silicone Carbide Paper, Grade: 1200 - 91987 - 50-91987F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91986 Wet/Dry Silicone Carbide Paper, Grade: 1000 - 91986 - 50-91986F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 88746 Replacement Blade Set For 4.5" Prop Buddy (Seachoice #88741) - 50-88746 - 50-88746F1
The replacement blade set for 4.5" Prop Buddy contains 1 blade set, compatible with the following Minn Kota propeller: MKP-38 Weedless Wedge 2, found on these motors: EO 1 HP; Fortrex 112; Terrova 112; Ulterra 112; Riptide Ulterra 112; Ultrex 112; Riptide Terrova 112; Riptide Fortrex 112; Riptide 112
Seachoice 88741 Prop Buddy 4.5" For Minn Kota Trolling Motor To Prevent Weed Build Up On Propeller - 50-88741 - 50-88741F1
Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propeller. Stainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable. Fits all Minn Kota® trolling motors with MKP-38 Weedless Wedge 2 propeller. Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propellerFits all Minn Kota® trolling motors with MKP-38 Weedless Wedge 2 propeller.Stainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable
Seachoice 88736 Replacement Blade Set For 4" Prop Buddy (Seachoice #88731) - 50-88736 - 50-88736F1
The replacement blade set for 4" Prop Buddy contains 2 blade sets. The 4-P style blade set is compatible the following Minn Kota® propellers: MKP-24 Weedless Wedge, found on these motors: Maxxum 101; Riptide 101; Vantage 101; Vector 3X 101 MKP-8 Weedless Wedge, found on these motors: AutoPilot 64; Maxxum 74, 76; Maxxum Transom 74; PowerDrive 64, 74; Vantage 74; Vector 3X 743HPa, 4HPA, 3.1HP/S, 3.1HP/B, 4.3HP/S, 4.3HP/B, RT3.1/S, RT3.1/B, RT4.3/S, RT4.3/B, RT74/B The 4-S style blade set is compatible with the following Minn Kota propeller: MKP-33 Weedless Wedge 2, found on these motors: Engine Mount 80, 101, 160, & 202; EO 1/2 HP; Fortrex 80, 101; Maxxum 80, 101; Maxxum Pro 80, 101; Maxxum Transom 80, 101; PowerDrive 80; PowerDrive V2 80; Riptide 80, 101; Riptide Pro 80, 101; Riptide Fortrex 80, 101; Riptide Maxxum 80, 101; Riptide Terrova 80, 101; Terrova 80, 101; Ulterra 80; Riptide Ulterra 80; Ultrex 80; Traxxis 80, 101; Vantage 80, 101; Vector 3X 80, 101; all Trim-N-Troll Kits
Seachoice 88731 Prop Buddy 4" For Minn Kota Trolling Motor To Prevent Weed Build Up On Propeller - 50-88731 - 50-88731F1
Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propeller. Stainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable.Fits all Minn Kota® trolling motors with MKP-8 Weedless Wedge, MKP-24 Weedless Wedge and MKP-33 Weedless Wedge 2 propellers. Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propellerFits all Minn Kota trolling motors with MKP-8 Weedless Wedge, MKP-24 Weedless Wedge and MKP-33 Weedless Wedge 2 propellersStainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable
Seachoice 85490 Type V Inflatable Waist Belt, Black - Wb24-85490 - 50-85490F1
The Seachoice Inflatable Waist Belt provides on-demand inflation protection in a low-profile design. It is super comfortable and lightweight with adjustable waist strap. The 24g CO2 cylinder is manually activated with the bright red pull handle, and a backup inflation tube is included.Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Convertible personal flotation device24g CO2 cylinder for Halkey Roberts 840 inflatorMANUAL activation with a back up Oral Inflation TubeComfortable and lightweightIdeal for recreational boating, fishing and other non-watersport activitiesU.S. Coast Guard approved
Seachoice 85403 Ski Vest - 4 Belt Red, 2Xl/3Xl - 85403 - 50-85403F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85393 Ski Vest - 4 Beltred, L/Xl - 50-85393 - 50-85393F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85383 Ski Vest - 4 Beltred, S/M - 85383 - 50-85383F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85363 Ski Vest - 4 Belt Blue, 2Xl/3Xl - 85363 - 50-85363F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85353 Ski Vest - 4 Belt Blue, L/Xl - 85353 - 50-85353F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85343 Ski Vest - 4 Belt Blue, S/M - 85343 - 50-85343F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 62691 Heat Shrink Tubing W/Sealant 1" X 1-1/2" Red 2/Pack - 62691 - 50-62691F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62681 Heat Shrink Tubing W/Sealant 3/4" X 1-1/2" Red 2/Pack - 62681 - 50-62681F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62671 Heat Shrink Tubing W/Sealant 1/2" X 1-1/2" Red 2/Pack - 62671 - 50-62671F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62661 Heat Shrink Tubing W/Sealant 1" X 1-1/2" Black 2/Pack - 62661 - 50-62661F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62651 Heat Shrink Tubing W/Sealant 3/4" X 1-1/2" Black 2/Pack - 62651 - 50-62651F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62641 Heat Shrink Tubing W/Sealant 1/2" X 1-1/2" Black 2/Pack - 62641 - 50-62641F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62211 3-To-1 Heat Shrink Tubing With Sealant - 62211 - 50-62211F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62141 3-To-1 Heat Shrink Tubing With Sealant - 50-62141 - 50-62141F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62131 3-To-1 Heat Shrink Tubing With Sealant - 50-62131 - 50-62131F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62121 Heat Shrink Tubing W/Sealant 1/4" X 3" Red 3/Pack - 50-62121 - 50-62121F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62111 Heat Shrink Tubing W/Sealant 3/16" X 3" Red 3/Pack - 50-62111 - 50-62111F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62101 Heat Shrink Tubing W/Sealant 1/8" X 3" Red 3/Pack - 50-62101 - 50-62101F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62071 3-To-1 Heat Shrink Tubing With Sealant - 62071 - 50-62071F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62051 Heat Shrink Tubing W/Sealant 1/4" X 3" Black 3/Pack - 62051 - 50-62051F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62041 Heat Shrink Tubing W/Sealant 3/16" X 3" Black 3/Pack - 62041 - 50-62041F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62031 Heat Shrink Tubing W/Sealant 1/8" X 3" Black 3/Pack - 62031 - 50-62031F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 60329 Clear Seal 16-14 Ga. Quick-Disconnect Multi-Stack Heat-Shrink Connector, 25/Bag - 50-60329 - 50-60329F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable multi-stack connector99.9% pure copper barrel, tin plated
Seachoice 60326 Clear Seal 12-10 Ga. 3-Way Splice, Yellow, 3/Bag - 50-60326 - 50-60326F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable three-way spliceConnects three wires together99.9% Pure copper with brazed seam barrels, tin plated
Seachoice 60324 Clear Seal 16-14 Ga. 3-Way Splice, Blue, 3/Bag - 50-60324 - 50-60324F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable three-way splice
Seachoice 60323 Clear Seal 22-18 Ga. 3-Way Splice, Red, 3/Bag - 50-60323 - 50-60323F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable three-way splice
Seachoice 60001 120 Piece Clear Seal Heat Shrink Terminal Kit - 60001 - 50-60001F1
18 Compartment box includes 120 pieces of clear heat shrink terminals including butt, ring and insulated disconnects.
Seachoice 52931 3-Function Sealed Oval Flush-Mount Tail Light - St70Rksch - 50-52931F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSonically sealed, waterproof3-Function: Stop, Tail, TurnPolycarbonate lens and housingInstallation hardware includedKit Includes: Light, Grommet, Plug (Pigtail)Size: 6.5" x 2.313" x 2.375"
Seachoice 52901 Led Sealed 3-Piece Identification Light Bar - Mcl97Rksch - 50-52901F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedDesigned for Over 80" Wide Trucks/TrailersWaterproof9 LED lightsSingle wireGrounds through mounting hardwareStainless steel base
Seachoice 52841 Led 6" Oval Sealed Lights For Surface Mount - Stl78Rksch - 50-52841F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed. Mount in any 360 degree positionSonically sealed, waterproo fFlange surface mount-no panel cut-out required3-function: Red stop/turn/tail light7.563" W x 3.313" H x 0.750" D
Seachoice 52831 Led 6" Oval Sealed Tail Light Kit For Flush Mount - Stl12Rksch - 50-52831F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSonically sealed, waterproofKit includes light, grommet and plug3-Function: Red stop/turn/tail lightWith A70GB grommet and A47PB pigtail, PL-3 connection.6.5" W x 2.25" H x 1.75" D
Seachoice 52801 Led Fleet Count Sealed Waterproof Tail Light, 8 Function Driver Side - Stl15Rssch - 50-52801F1
18-LED, Driver Side.8-Function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflex, license illuminator.Hard wired, with separate ground wire Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedOver 80" Universal MountWaterproofLow profileAcrylic lens, ABS plastic housing
Seachoice 52791 Led Fleet Count Sealed Waterproof Tail Light, 7 Function Passenger Side - Stl14Rssch - 50-52791F1
12-LED, Passenger Side. 7-Function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflexHard wired, with separate ground wire Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedUniversal MountWaterproofLow profileAcrylic lens, ABS plastic housing
Seachoice 52681 Led 3/4" Mini Sealed Marker/Clearance Kit Red - Mcl12Rksch - 50-52681F1
Fits any 3/4" openingSingle diodeDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSealed, waterproof constructionPolycarbonate lens and housingHard wired, with separate ground wireSize: .74" x .74" x .90"
Seachoice 52671 Led 3/4" Mini Sealed Marker/Clearance Kitamber - Mcl12Aksch - 50-52671F1
Fits any 3/4" openingSingle diodeDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSealed, waterproof constructionPolycarbonate lens and housingHard wired, with separate ground wireSize: .74" x .74" x .90"
Seachoice 51571 Led Thinline Sealed Stop/Turn/Tail Light - Stl69Rksch - 50-51571F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealedPolycarbonate lens and housingMeets SAE S2T2I6 for over 80" wide vehicles and has built-in reflex meeting SAE AHard wired with separate ground wire
Seachoice 50-20361 Fuel Filter & Gasket For Gold-Flo Electronic Fuel Pump Kit - 20361 - 50-20361F1
Fuel Filter And Gasket - Gold-Flo®74 Micron. Made in U.S.A.
Seachoice 5-Flat To 7-Round Coil Cord Adaptor - A57Ccsch - 50-51591F1
Converts tow vehicle 7-way round blade connector to 5-way flat pin connector.
Seachoice 46361 62 Series Carbon Monoxide Detector, Flush Mount - 62-542-Wt - 50-46361 Superseded By: 270-62542Wtmarinetrf1
Space saving compact design for boats. Designed for the harsh marine environment. No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Alarm Mute button silences alarm while boat is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain. Memory Scan™ - Retains the CO level that activated the alarm. Micro Current Technology - Saves precious battery power in a boat. End of Life Signal alerts boater to replace the alarm after 5 years of service. Conforms to UL 2034 Marine Use and CSA 6.19-01.
Seachoice 40211 Hollow-Braid Polypropylene Anchor Line, White, 3/8" X 75' - 50-40211 - 50-40211F1
Hollow-braided polypropylene. Rot proof. Great for small boats and mushroom anchors. Galvanized-steel snap hook. Hollow-braided polypropyleneWaterproof, resists rotLow resistance to sunlightGreat for small boats and mushroom anchorsGalvanized-steel snap hook
Seachoice 40201 Hollow Braid Polypropylene Anchor Line, White, 1/4" X 50' - 40201 - 50-40201F1
Hollow-braided polypropylene. Rot proof. Great for small boats and mushroom anchors. Galvanized-steel snap hook. Hollow-braided polypropyleneWaterproof, resists rotLow resistance to sunlightGreat for small boats and mushroom anchorsGalvanized-steel snap hook
Seachoice 39201 Polypropylene Offshore Hatch - 10-3/8 Inch X 20-1/2 Inch Id - White - 39201 - 50-39201F1
Low-profile design Low-profile designUV-stabilized, acetone-resistant polypropylene constructionHatch lid features interior gasketIntegrated hinge system allows 180° openingFlush handle for easy accessMax. weight capacity: 350 lbs.#8 Fasteners required
Seachoice 39181 Polypropylene Offshore Hatch - 7-3/8 Inch X 11-1/8 Inch Id - White - 39181 - 50-39181F1
Low-profile design Low-profile designUV-stabilized, acetone-resistant polypropylene constructionHatch lid features interior gasketIntegrated hinge system allows 180° openingFlush handle for easy accessMax. weight capacity: 350 lbs.#8 Fasteners required
Seachoice 39141 Polypropylene 7" X 11" Id Hatch With Molded In 100 Degree Stainless Steel Hinge - 39141 - 50-39141F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39131 Polypropylene 7" X 11" Id Hatch With Molded In 100 Degree Stainless Steel Hinge - 39131 - 50-39131F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39121 Polypropylene 7" X 11" Id Pry-Out Type Hatch-White - 39121 - 50-39121F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 30 Degree Plastic Rod Holder With Injection Molded Abs Flange - White - 50-89251 - 50-89251F1
Molded high impact plastic. Etched finish on flange. One-piece construction. Non-corrosive. Uses (3) fasteners #12 for installation.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant, Black With Assorted Sizes 1/8" To 1/2" X 3" (5 Per Pack) - 62201 - 50-62201F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Sizes
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/8" X 3", Assorted Colors (5 Per Pack) - 62191 - 50-62191F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/4" X 3" Assorted Colors (4 Per Pack) - 62221 - 50-62221F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62621 - 50-62621F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62611 - 50-62611F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62601 - 50-62601F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61541 - 50-61541F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61531 - 50-61531F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61521 - 50-61521F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61511 - 50-61511F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61501 - 50-61501F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60481 - 50-60481F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60471 - 50-60471F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60461 - 50-60461F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60451 - 50-60451F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60441 - 50-60441F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60371 - 50-60371F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60361 - 50-60361F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60351 - 50-60351F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60341 - 50-60341F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60331 - 50-60331F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 28725 4-Blade Aluminum Propeller, 19" Pitch, 14" Dia., Rh Rotation - 28725 - 50-28725F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28723 4-Blade Aluminum Propeller, 17" Pitch, 14" Dia., Rh Rotation - 28723 - 50-28723F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28721 4-Blade Aluminum Propeller, 14" Pitch, 14" Dia., Rh Rotation - 28721 - 50-28721F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28717 3-Blade Aluminum Propeller, 19" Pitch, 13" Dia., Rh Rotation - 28717 - 50-28717F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28715 3-Blade Aluminum Propeller, 17" Pitch, 13-1/4" Dia., Rh Rotation - 28715 - 50-28715F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28713 3-Blade Aluminum Propeller, 15" Pitch, 13-3/4" Dia., Rh Rotation - 28713 - 50-28713F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28711 3-Blade Aluminum Propeller, 13" Pitch, 14" Dia., Rh Rotation - 28711 - 50-28711F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28707 3-Blade Aluminum Propeller, 21" Pitch, 14-1/2" Dia., Rh Rotation - 28707 - 50-28707F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28705 3-Blade Aluminum Propeller, 19" Pitch, 14-1/2" Dia., Rh Rotation - 28705 - 50-28705F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28703 3-Blade Aluminum Propeller, 17" Pitch, 15" Dia., Rh Rotation - 28703 - 50-28703F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28701 3-Blade Aluminum Propeller, 15" Pitch, 15-1/4" Dia., Rh Rotation - 50-28701 - 50-28701F1
Seachoice 28701 3-Blade Aluminum Propeller is an excellent performance and value in a replacement propeller for most stern drives and outboards (90hp - 350hp / 4.75" Gear case). Made with a special low-copper alloy for excellent toughness and corrosion resistance. Die-case contrucion allows for uniform blade positioning and durable powder coating contributes to a smoother, longer lasting product. Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28696 Propeller Hub Kit, Suzuki® 150-300 Hp 4-Stroke & 150-225 Hp 2-Stroke Outboards - 50-28696 - 50-28696F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28694 Propeller Hub Kit,Honda® Outboards 75-90 Hp - 1999 & Newer, 115-130 Hp - 50-28694 - 50-28694F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28693 Propeller Hub Kit, Yamaha® Outboards & Stern Drives With V-4 & V-6 Gear Case © 1980 & Newer - 50-28693 - 50-28693F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and spacer
