Select Category
Engine & Fuel
Fuel Water Separator Assembly - 18-7965-1 - 47-79651F1
Compact bracket and separator kit for outboards up to 115hp with 10 micron.
Fuel Water Sep. Filter Mercury Ob 4-Stroke Eng 175-300Hp V6 V8 Four Stroke Ob - 18-7519 - 47-7519F1
Fuel Tank With Fuel Demand Valves, 3.2 Gal - 8M0045692 - 710-1200-8M0045692F1
Fuel tanks meet U.S. 2011 EPA requirements for a pressurized portable fuel tank. They include a "Diurnal Cap" and Mercury's Fuel Demand Valve (FDV), so fuel is provided only as needed by the engine and not forced through under pressure. Fuel line gets connected directly to the outlet barb of the FDV.
Fuel Tank W/Gauge, Fuel Demand Valve & Disconnect, 3.2 Gal - 8M0047598 - 710-1200-8M0047598F1
Fuel tanks meet U.S. 2011 EPA requirements for a pressurized portable fuel tank. They include a "Diurnal Cap" and Mercury's Fuel Demand Valve (FDV), so fuel is provided only as needed by the engine and not forced through under pressure. Includes a provision for a fuel line quick disconnect. The 32-8M0061885 fuel line plugs directly into the quick disconnect on this tank.
Fuel Tank Repair Kit - 84334 - 180-84334F1
Eliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4" (10cm) long and holes up to 3/8" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).
Fuel Tank Installation Kit - 35723 - 114-035723F1
Replace aging fuel tanks and maximize your fuel capacity space with a Moeller below-deck, permanent tank. Tank system installation kit contains all the parts to install the fuel-fill and through-hull ventilation system. Includes deck fill, hose clamps, chrome/brass thru-hull vent, 1-1/2" fuel fill hose, and 25" of 5/8" vent hose with 5/8" brass hose barb.
Fuel Tank Hold Down Kit - Fch1Dp - 232-Fch1Dpf1
This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles, four footman loops and mounting hardware.
Fuel Tank Hold Down Kit - 35710 - 114-035710F1
Hold down kit includes four (4) stainless steel hold down brackets.
Fuel Tank Fitting Yamaha 1/4" - 2555756 - 23-88976F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Tank Fitting 1/4" Je/Omc - 2550642 - 23-88836F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Sender Replacement Gasket - 50-15511 - 50-15511F1
Fuel Sender Replacement Gasket for 15421, 15461, 15471 & 15501
Fuel Pump/Coolw/Coolfuel Ss<861156A04 - 8M0125845 - 710-8M0125845F1
Fuel Pump-Yam# 66M-24410-10-00 F9.9/T9.9 2005-06, F15 1998-06 - 18-35302 - 47-35302F1
Fuel Pump Mounting Gasket Will Fit Vp/Omc/Crusader - 34898 - 710-27-34898F1
Fuel Pump Gasket Ss<27-43186 1 - 8M0108647 - 710-27-8M0108647F1
Fuel Pressure Regulator Mounts On Fuel Cooler - 807952A1 - 710-807952A1F1
Fuel Pressure Regulator Mounted On Fuel Cooler - 861126A1 - 710-861126A1F1
Fuel Press Regulator Mounted On Gen Iii Fuel Cooler - 892681 - 710-892681F1
Fuel Pmp Cubekt 7.0-4.0Psi 12V - 20351 - 50-20351F1
Compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. For 12 volt systems only. Not intended for aircraft use.96" Lift, 1/8 x 27 Thread w/Check Valve Easy to installCoast Guard ignition test approvedUL (574A) CertifiedBuilt-in Anti-Siphon Valve74 Micron filter includedSelf-regulatingTransient ProtectionInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Fuel Line-8 Ft Mp Ss<32-8M0061095 - 8M0061895 - 710-32-8M0061895F1
Fuel Line Hose Barb @2 Ss<22-89771Q 1 - 89771Q2 - 710-22-89771Q2F1
Fuel Line Assembly, Threaded On Both Ends, 8' - 8M0061882 - 710-32-8M0061882F1
Low permeation hose with threaded fittings. Includes an "EPA-MERC-PB15-2" primer bulb. Bulbs will perform at 5° F after 6 weeks of exposure to fuel. Fits varying applications using the older style twist type disconnects at the engine end and either a bayonet or thread-in fitting on the tank end.
Fuel Line Assembly W/Quick Connect Fittings On Both Ends, 8' - 8M0061886 - 710-32-8M0061886F1
Low permeation hose has standard quick connect type fitting on engine end and 1/4" NPT threaded fitting on the tank end and includes "EPA-MERC-PB15" primer bulb. Bulb will perform at 5° F after 6 weeks of exposure to fuel. Fits Force 40 hp and larger (1993 & Newer), Force 9.9/15/25 hp (1998) and all Mercury/Mariner outboards using clip-on type disconnect at engine ends and a tank with threaded fuel pickup fitting. Quick connect type fittings on both ends.
Fuel Line Assembly W/Quick Connect Engine End And Threaded Fitting On Tank End, 8' - 8M0061883 - 710-32-8M0061883F1
Low permeation hose has standard quick connect type fitting on engine end and 1/4" NPT threaded fitting on the tank end and includes "EPA-MERC-PB15" primer bulb. Bulb will perform at 5° F after 6 weeks of exposure to fuel. Fits Force 40 hp and larger (1993 & Newer), Force 9.9/15/25 hp (1998) and all Mercury/Mariner outboards using clip-on type disconnect at engine ends and a tank with threaded fuel pickup fitting. Quick connect type fitting on engine end and 1/4" NPT threaded fitting on the tank end.
Fuel Line Assembly W/Quick Connect Engine End And Pigtail Connector On Tank End, 8' - 8M0061885 - 710-32-8M0061885F1
Low permeation hose has standard quick connect type fitting on engine end and 1/4" NPT threaded fitting on the tank end and includes "EPA-MERC-PB15" primer bulb. Bulb will perform at 5° F after 6 weeks of exposure to fuel. Fits Force 40 hp and larger (1993 & Newer), Force 9.9/15/25 hp (1998) and all Mercury/Mariner outboards using clip-on type disconnect at engine ends and a tank with threaded fuel pickup fitting. Quick connect type fitting on the engine end and connects to the pigtail on the 2011 pressurized fuel tanks.
Fuel Line 8' Yamaha Non-Epa Approved - 18-8017S-1 - 47-8017S1F1
Non EPA Complaint, complete fuel line assemblies. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' Yamaha Epa - 18-8017Ep-2 - 47-8017Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' Mercury Clip Non-Epa Approved - 18-8016S-1 - 47-8016S1F1
Non EPA Complaint, complete fuel line assemblies. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' Mercury Clip Epa - 18-8016Ep-2 - 47-8016Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' Mc Barb-Clip Epa - 18-8024Ep-2 - 47-8024Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' Honda Epa - 18-81042Ep-2 - 47-81042Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' Ev/Jn 2 Fit Epa - 18-8009Ep-2 - 47-8009Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' 5/16" Univ Epa - 18-8013Ep-2 - 47-8013Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' 3/8" Univ Epa - 18-8015Ep-2 - 47-8015Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 8' 3/8 Univ Non-Epa Approved - 18-8015S-1 - 47-8015S1F1
Non EPA Complaint, complete fuel line assemblies. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Line 12Ft Qs Ss<32-8M0061088 - 8M0061888 - 710-32-8M0061888F1
Fuel Line 12' 5/16" Univ Epa - 18-8032Ep-2 - 47-8032Ep2F1
Complete fuel line assemblies are all EPA compliant for outboards with above deck applications and are resistant to Ethanol fuel. NEW FKP (low permeation) primer bulbs. Thermoplastic construction resists UV. Barrier layer prevents permeation.
Fuel Kleen Collar - 8Fk1R - 383-8Fk1Rf1
Used on a fuel fill nozzle either at the pump or a fuel jug using MYCELX infused material. Catches drips and splashes from fuel filling nozzles in marine applications.
Fuel Kit Yamaha 6'X3/8 Usc - 93806Yus7 - 23-93806Yus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Univ 6'X3/8 Usc - 93806Uus7 - 23-93806Uus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Omc 6'X3/8 Usc - 93806Eus7 - 23-93806Eus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Mercury 6'X3/8 Usc - 93806Mus7 - 23-93806Mus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
