Fuel System
Racor Lg100 Fuel/Air Seperator With 5/8" Hose Barb - Lg100 - 62-Lg100F1
A typical refueling will send up to a half gallon or more of fuel spilling overboard. USCG and other regulations prohibit the discharge of oils including civil and criminal penalties.Installed in the fuel tank vent line, the Racor Fuel/Air Separator efficiently separates air from fuel forced into the line. Air is vented, and all fuel is returned to the tank. The Fuel/Air Separator captures fuel normally discharged due to agitation and thermal expansion up to 2.4 PSI. It also eliminates damage to expensive striping and labels and protects finishes from fuel stains. The unit is maintenance free -- there's nothing to rust or corrode.Fits neatly into your vent line, actually replacing a section of the line. One Fuel/Air Separator unit is required for each vent line. Hose barb: 5/8".LG100: (17 CFPM max air flow, Size: 9-3/4" H x 4" dia.)Stage One - Venting tank fuel is deflected by the flow diverter and fuel is directed down to the drain ports. Air is allowed to bypass and continues out.Stage Two - Fuel defoams through a fine wire mesh screen which filters out largecontaminants. Under the screen, the fuel collects temporarily until it can flow back down to the fuel tank. Stage Three - Vapor collects on the interior surfaces and coalesces. The fuel returns downward by gravity and air continues out. The safety relief valve includes a floating check ball which will not permit a large in-rush of fuel to bypass. In the event of internal pressure reaching 2.4 PSI (0.17 bar), the spring will compress and open the safety seat.
Racor R11S Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R11S - 62-R11Sf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor R11T Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R11T - 62-R11Tf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R12P - 62-R12Pf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R12S - 62-R12Sf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R12T - 62-R12Tf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R20P - 62-R20Pf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R20S - 62-R20Sf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R20T - 62-R20Tf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Diesel Gas Spin-On Fuel/Water Separators - R20Tul - 62-R20Tulf1
The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating. S = Secondary/Final 2 micron (Brown cap) T = Primary or Secondary/Final 10 micron (Blue cap) P = Primary 30 micron (Red cap)
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3227 - 62-S3227F1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assemblies Long-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3228Sul - 62-S3228Sulf1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assemblies Long-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3228Tul - 62-S3228Tulf1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assemblies Long-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3232 - 62-S3232F1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assembliesLong-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3232Tul - 62-S3232Tulf1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assemblies Long-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3240 - 62-S3240F1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assemblies Long-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor Replacement Element For Gas Spin-On Fuel/Water Seperators - S3240Tul - 62-S3240Tulf1
Aquabloc® filter replacement elements are offered as retrofits to Racor clear or metal bowl filter assembliesLong-life with 98% filtration efficiency and 100% water removal per SAE test proceduresHigh capacity and long lifeCorrosion-resistant construction.Meets ABYC standard for gasoline-powered vessels
Racor S3211Tul 10 Micron Spin-On Series Fuel/Water Separator - S3211Tul - 62-S3211Tulf1
Compatible with Racor's line of Marine Spin-on Series fuel filter / water separator assemblies. These elements exhibit exceptional removal efficiency of both bulk and emulsified water, low restriction of fuel flow, and high dirt-holding capacity. Their unique design makes them capable of performing in modern marine diesel and gasoline applications, where harsh conditions can cause tiny particles of dirt and water to score and erode precision components, leading to engine damage and increased downtime. All Spin-on Series marine replacement cartridge filter elements utilize Racor's high-efficiency Aquabloc® engineered media.
Recochem 14431 Camping Fuel, 1L, 6/Case - 14-431 - 372-14431F1
A reliable fuel for catalytic heaters, for all naphtha lanterns and gas stoves and for Coleman-type stoves and lanterns. It is a clear petroleum distillate with the flammability level of gasoline, so it is often called white gas heat or naphtha fuel.
Recochem 14434 Camping Fuel, 4L, 4/Case - 14-434X52 - 372-14434F1
A reliable fuel for catalytic heaters, for all naphtha lanterns and gas stoves and for Coleman-type stoves and lanterns. It is a clear petroleum distillate with the flammability level of gasoline, so it is often called white gas heat or naphtha fuel.
Regulator Kit Mounted On Fuel Cooler - 860349A1 - 710-860349A1F1
Regulator-Fuel Ps Mounted On Fuel Rail - 885174 - 710-885174F1
Repair Kit Carb O/B - 51091 - 710-1395-5109 1 Superseded By: 710-1395-51091F1
Repair Kit Imp 4-6Hp Carb/4Str Ss<8M0155395 - 8M0155395 - 710-8M0155395F1
Replacement Fuel/Water Separtor Element - 18-7919 - 47-7919F1
Filters allow water to be drained from the filter to extend sevice life.AquaVue™ Clear Bowls: Use for outboard and above deck installations.Metal Bowl Collection: USCG regulations require the use of flame resistant metal bowls below deck.
Roch Mercarb 2Bbl Elec Choke Ke<70125A 1 - 70125A02 - 710-70125A02F1
Safe-T-Alert 62541 62 Series Carbon Monoxide Alarm, Surface Mt, White - 62-541-Wt-Marine - 270-62541Wtmarinef1
Space Saving. Compact design Space Saving. Compact designIdeal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, Truck & Folding CampersAlarm Mute button silences alarm while RV is ventilatedRapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remainMemory Scan™. Retains the CO level that activated the alarm12 Volt power means no missing or dead batteries to replaceMeets RVIA/NFPA requirements
Safe-T-Alert 62541Bl 62 Series Surface Mount Carbon Monoxide Alarm, Black - 62-541-Bl - 270-62541Blf1
Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remainMemory Scan™ Retains the CO level that activated the alarm12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Safe-T-Alert 62541Wt 62 Series Surface Mount Carbon Monoxide Alarm, White - 62-541-Wt - 270-62541Wtf1
Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remainMemory Scan™ Retains the CO level that activated the alarm12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Safe-T-Alert 62542Bltr 62 Series Surface Mount Carbon Monoxide Alarm, Black With Trim Ring - 62-542-Bl-Tr - 270-62542Bltrf1
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.Memory Scan™ Retains the CO level that activated the alarm.12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Safe-T-Alert 62542Wttr 62 Series Surface Mount Carbon Monoxide Alarm, White With Trim Ring - 62-542-Wt-Tr - 270-62542Wttrf1
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.Memory Scan™ Retains the CO level that activated the alarm.12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Scepter 04068 Fuel Fitting-Tank Brp Male - 4068 - 770-04068F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 04075 Fuel Tank Fitting, Yamaha Brass Male - 4075 - 770-04075F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05787 Fuel Fitting-Brp Female - 5787 - 770-05787F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05791 Fuel Fitting-Mercury Eng Clip - 5791 - 770-05791F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05793 Fuel Fitting-Mercury Tank Clip - 5793 - 770-05793F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05813 Fuel Tank/Engine Fitting, Yamaha Brass Female - 5813 - 770-05813F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05815 Fuel Tank/Engine Fitting, Yamaha Brass Female - 5815 - 770-05815F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05822 Fuel Fitting-Brp Female - 5822 - 770-05822F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05827 Fuel Fitting-Honda Tank Female - 5827 - 770-05827F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05837 Fuel Fitting-Tank Mercury Clip Type - 5837 - 770-05837F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05869 3/8" Primer Bulb - 5869 - 770-05869F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 07482 Fuel Line Assembly, Mercury, ('98 & Newer) - 7482 - 770-07482F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07483 Fuel Line Assembly, Mercury Cast/Aluminum Bayonet Style - 7483 - 770-07483F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07485 Fuel Line Assembly, Universal - 3/8" Id X 80" L - 7485 - 770-07485F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07486 Fuel Line Assembly, Johnson/Evinrude - 7486 - 770-07486F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07489 Fuel Line Assembly, Yamaha - 7489 - 770-07489F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07491 Fuel Line Assembly, Universal - 5/16" Id X 80" L - 7491 - 770-07491F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07494 5/16" Primer Bulb - 7494 - 770-07494F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 07497 Fuel Fitting-Mercury Tank Bayonet, Metal - 7497 - 770-07497F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 07813 1/4" Primer Bulb - 7813 - 770-07813F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 08580 Oem Choice Portable Fuel Tank, 6.6 Gal - 8580 - 770-08580F1
Sold around the world by leading outboard engine manufacturers like Tohatsu, Honda, Mercury, Yamaha and Suzuki. Trusted OEM choice for portable marine fuel tanks. Made of UV Stabilized, Rust and Corrosion Resistant HDPE for Maximum Durability2-Way Vented CapIncludes a universal 1/4" NPT fuel pick-up adapterMechanical direct sight gauge with easy-to-read indicatorISO & CSA certified, UL listedEPA/CARB Compliant
Scepter 09315 Epa/Carb Replacement Cap With Chain And Tether (Fits All Scepter Epa Portable Tanks) - 9315 - 770-09315F1
EPA/CARB approved cap with chain & tether. Fits all Scepter EPA portable tanks.
Scepter 09476 Fuel Fitting-Mercury Engine Bayonet - 9476 - 770-09476F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 11522 Fuel Line Assembly, Universal 3/8" X 7' - 11522 - 770-11522F1
^EPA COMPLIANT/CARB CERTIFIEDProvides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications^08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter 11553 Fuel Connector, Quick Universal 3/8" Barb Female 1/4" Npt Male Stainless Steel - 11553 - 770-11553F1
OEM Choice! You will enjoy the confidence of knowing you're buying the same OEM quality in aftermarket replacement parts that are supplied to original equipment manufacturers. Scepter products meet or exceed government emissions regulations, helping to improve air quality and reduce exposure to toxic chemicals.
Scepter Csa Underseat Portable Fuel Tank-International Use, 3-Gal/11.4L - 10504 - 770-10504F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fi ttingsSturdy constructionSeamless one-piece polyethylene tank shell constructionAdvanced styling / highly functional designInternational tanks (Not ECO Check) meet CSA standards
Scepter Csa Underseat Portable Fuel Tank-International Use, 6 Gal/22.7L - 10509 - 770-10509F1
Convenient combination fuel pick-up / sight gaugeMolded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fi ttingsSturdy constructionSeamless one-piece polyethylene tank shell constructionAdvanced styling / highly functional designInternational tanks (Not ECO Check) meet CSA standards
Scepter Fr1G201 Smartcontrol™ Fuel Container Epa/Carb Compliant, Gasoline, 2 Gal, Red, 9.7"Lx6.9"Wx11.5"H - Fr1G201 - 770-Fr1G201F1
A new generation of gas cans featuring the Scepter SmartControl™ easy pour spout! The SmartControl system easy to use in a durable design. The SmartControl™ delivers fast fills without spills. Easy-push and controllable flow makes filling everything a cleaner, safer, better experience.
Scepter Fsck571 Smartcontrol™ Kerosene Fuel Container, 5 Gal Blue - Fsck571 - 770-Fsck571F1
Scepter® SmartControl™ fuel containers are the next generation of rugged gas cans that provide a clean, fast and hassle-free experience. Featuring a simple spout and flame mitigation device, this product eliminates frustration with an easy-to-use, durable design, and an added layer of protection. The SmartControl fuel container's squeeze controlled flow rate for a cleaner, safer, better experience - without spilling a drop. Easy to Pour Kerosene Can with Rear HandleFast Fills without the SpillsControllable FlowCARB / EPA Compliant
Scepter Jerry Can - Non Carb Compliant, 1-1/4 Gal. - 7081 - 770-07081F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: A reversible self-venting spout - no need to worry about separate vent closuresAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 2.5 Gal. - 7079 - 770-07079F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: A reversible self-venting spout - no need to worry about separate vent closuresAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 5.2 Gal. - 7622 - 770-07622F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: child resistant vent on the handle to improve flow ratesAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 6.6 Gal. - 7539 - 770-07539F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: child resistant vent on the handle to improve flow ratesAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8309 - 770-08309F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8313 - 770-08313F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8316 - 770-08316F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 8190 Topside 12 Gallon Fuel Tank - Not For Sale In The U.S. - 8190 - 770-08190F1
Manufactured from high-density polyethylenewith UV-stabilized resinProvides positive seal with an injection molded 2-1/4" fill neckMechanically vented fuel capFeatures 90°, 1/4" NPT fuel withdrawal elbow (does not rotate)Includes mechanical direct-sight gauge with easy-to-read indicator tested to industry standardsSpecifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. Not for sale in the U.S.
Scepter Marine 8191 Topside 12 Gallon Low Profile Fuel Tank - Not For Sale In The U.S. - 8191 - 770-08191F1
Manufactured from high-density polyethylenewith UV-stabilized resin Provides positive seal with an injection molded 2-1/4" fill neckMechanically vented fuel capFeatures 90°, 1/4" NPT fuel withdrawal elbow (does not rotate)Includes mechanical direct-sight gauge with easy-to-read indicator tested to industry standardsSpecifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. Not for sale in the U.S.
Scepter Marine Primer Bulb - 10543 - 770-10543F1
EPA COMPLIANT/CARB CERTIFIED Maximizes engine performanceGasoline and solvent-resistant constructionDesigned for today's ethanol fuelsHigh flow capacity & dual internal check valves for quick, efficient priming
Scepter Marine Universal Fuel Line Assembly - 8312 - 770-08312F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications
Scepter Marine Universal Fuel Line Assembly - 8318 - 770-08318F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications
Scepter Neptune Portable Fuel Tank - 8590 - 770-08590F1
The "ECO Check" line features a EPA/CARB approved fuel cap and a low permeation tank that virtually eliminates fuel evaporationMolded from UV stabilized, cross-linked polyethyleneAccepts standard 1/4 NPT marine tank fittings
Scepter Neptune Portable Fuel Tank - 8592 - 770-08592F1
The "ECO Check" line features a EPA/CARB approved fuel cap and a low permeation tank that virtually eliminates fuel evaporation Molded from UV stabilized, cross-linked polyethyleneAccepts standard 1/4 NPT marine tank fittings
Scepter Oem Choice Portable Fuel Tank - 8576 - 770-08576F1
Convenient combination fuel pick-up / sight gaugeMolded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scepter Rectangular Portable Fuel Tank - 8667 - 770-08667F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Rectangular Portable Fuel Tank - 8668 - 770-08668F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Rectangular Portable Fuel Tank - 8669 - 770-08669F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Under Seat Portable Fuel Tank - 10506 - 770-10506F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scepter Under Seat Portable Fuel Tank - 10511 - 770-10511F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Screen Fuel Fltr 75-600Hp 4Str - 8M0090809 - 710-35-8M0090809F1
Sea-Dog 364190 Polycarbonate Cover For Poly In-Line Strainer - 364190 - 354-364190F1
Polycarbonate cover for strainer
Seachoice 15441 Fuel Gauge, Black Bezel - 15441 - 50-15441F1
15501: Combination of 15421 and 15441. 15421: Fuel Gauge Sender: Adjustable depth from 6" to 27". Fits most tanks. Includes gasket. Resistance value 240 ohms (empty) to 33 ohms (full). 15441: Fuel Gauge: Black bezel low profile fuel gauge for 12V negative ground systems. Use in conjunction with Model 15421 fuel sender. Complete with light kit.
Seachoice 20291 Gold-Flo High Performance Electronic 34 Gph Fuel Pump Kit 5.5 - 4 Psi - 50-20291 - 50-20291F1
This rugged, lightweight, solid state fuel pump provides the high output performance required by heavy duty construction, agricultural, industrial, marine or military equipment in addition to the power plant requirements of sports cars, sedans, light trucks and SUV's. Compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. 24" Lift. 20291: 1/4 x 18 Thread w/o Shut-Off Valve, 24" Lift Easy to installCoast Guard ignition test approved74 Micron filter includedReliable solid state design provides longer lifeMade in U.S.A. by FACET
Seachoice 20711 90 Degree Brass Fuel Elbow - 50-20711 - 50-20711F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20851 90 Degree Brass Fuel Elbow - 50-20851 - 50-20851F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20861 90 Degree Brass Fuel Elbow - 50-20861 - 50-20861F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20871 90 Degree Brass Fuel Elbow - 50-20871 - 50-20871F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
