Select Category
Engine & Fuel
Omc Johnson/Evinrude 1/8" Fuel Hose, 50' - 18-8051 - 47-8051F1
Made from an alcohol resistant compound. Note: Product is for repair and replacement on boats manufactured prior to January 1, 2009, intended for use in U.S. Refer to EPA / CARB standards for specific details. International standards may vary.
Omc Johnson/Evinrude 3/16" Fuel Hose, 50' - 18-8052 - 47-8052F1
Made from an alcohol resistant compound. Note: Product is for repair and replacement on boats manufactured prior to January 1, 2009, intended for use in U.S. Refer to EPA / CARB standards for specific details. International standards may vary.
Omc/Volvo Cooling Pump - G9901 - G9901 - 762-G9901F1
Impeller Kit: 09959K Minor Repair Kit: 23979Major Repair Kit: 12665
Omc/Volvo Cooling Pump - G9903 - G9903 - 762-G9903F1
Impeller Kit: 09959K Minor Repair Kit: 23979Major Repair Kit: 12665
Onan 1220893 Onan / Cummins Replacement Parts, Oil Filter Hdkca/Cb, Hdkla/B - 122-0893 - 515-1220893F1
Green Label Parts oil filters feature valves that allow oil to bypass the oil filter during cold starts, or if the filter becomes plugged.As these "will-fit" filters trap debris, oil pressure starvation can occur, leading to high oil pressures, failed gaskets, and even engine damage. Please refer to your Operator's Manual for specific maintenance intervals. We do not have a wrench for this filter.
Onan 1492513 Cummins Replacement Parts, Fuel Filter, Hdkah, Hdkah, Hdkca/Cb , Hdcaa/Ab, Hdkaj, Hdkba - 149-2513 - 515-1492513F1
Green Label Parts are tested and designed specifically for RV applications. "Will-fit" parts and gaskets can be correct shape, but because of inadequate design, the wrong material, or poor quality, they could cause premature failure, leakage, or performance problems.
Onan/Cummins 1220645 Oil Filters Emerald Bge, Bgel, Marquis Bgm - 122-0645 - 515-1220645F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1220833 Oil Filter, Qd Hdkah, Hdkak, Hqdoa, Hqdpc - 122-0833 - 515-1220833F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1220836 Oil Filter, Qg Hgjac, Hgjab, Hgjaa - 122-0836 - 515-1220836F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1402105 Air Filter Qg Kvd, Kv, Kvc - 140-2105 - 515-1402105F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1402379 Air Filter Emerald, Marquis - 140-2379 - 515-1402379F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1403280 Air Filter, Fits Onan Generator Models: Kyd (Spec A-B), Ky (Spec B-H), Ky (Spec J-N, P) - 140-3280 - 515-1403280F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1403295 Air Filter Qg Ky B-H - 140-3295 - 515-1403295F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1470860 Fuel Filter Efi - 147-0860 - 515-1470860F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1492279 Fuel Filter Emerald Bge F-G, Nhe G, Marquis Bgm A-F, Nhm A-F - 149-2279 - 515-1492279F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 149231101 Electric Fuel Pump - 149-2311-01 - 515-149231101F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1492333 Fuel Filter Emerald Bge J-P, Nhe J-P - 149-2333 - 515-1492333F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 149234101 Fuel Filter Og Carb -Hgjac, Hgjab - 149-2341-01 - 515-149234101F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1492457 Fuel Filter Qg Kyd, Ky - 149-2457 - 515-1492457F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1670272 Spark Plug Emerald, Marquis - 167-0272 - 515-1670272F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 1670275 Spark Plug Qg Kyd, Ky 60 Hz - 167-0275 - 515-1670275F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 3265336 15W40 Oil - 326-5336 - 515-3265336F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins 5410765 Carb Kit - 541-0765 - 515-5410765F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins A042P619 Carburetor Repair Kit - A042P619 - 515-A042P619F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins A062T421 Carburetor - A062T421 - 515-A062T421F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins A062T422 Carburetor - A062T422 - 515-A062T422F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onan/Cummins A063E183 10W30 Oil - A063E183 - 515-A063E183F1
Cummins Power Generation warrants only the quality and integrity of Green Label Parts. Any damage caused by the use of non-Green Label Parts filters will not be covered under the Cummins Onan limited warranty.
Onyx 13090070100419 M-16 Manual Inflatable Belt Pack, Grey - 130900-701-004-19 - 116-13090070100419F1
16 gram CO2 charge provides 17 lbs. of buoyancy The oral inflation tube should be used by wearer to provide additional buoyancy up to 26.5 lbs.Extremely low profileSecure Pull - clips to life jacket; allows for quick release when pulled for inflation1" buckle and body belt200 denier nylon oxford protective cover
Optronics A91Gbp Flush Mount Grommet For Mini Sealed Lights - A91Gbp - 158-A91Gbpf1
Flush mount grommet for mini sealed lights, Black PVC material. Size: 3.3" x 1.94" x .5"
Optronics Mcl95As Sealed Marker/Clearance Light, Amber, Stud, Retail - Mcl95As - 158-Mcl95Asf1
Stud mount clearance or side marker light. Sonically sealed, waterproof, polycarbonate lens and housing, stainless steel base. Single wire design grounds through mounting hardware.
Optronics Mcl95Rs Sealed Marker/Clearance Light, Red, Stud, Retail - Mcl95Rs - 158-Mcl95Rsf1
Stud mount clearance or side marker light. Sonically sealed, waterproof, polycarbonate lens and housing, stainless steel base. Single wire design grounds through mounting hardware.
Optronics Stl72Rk Waterproof Stop & Turn Led Oval Tail Light Kit, Polycarbonate Lens & Housing - Stl72Rk - 158-Stl72Rkf1
LED stop and turn tail light kit has 10 super diodes, 6" polycarbonate housing/lens with rubber grommet and right angle 3-pin pigtail. Waterproof sealed lights. Includes mounting hardware. Conforms to DOT/SAE/FMVSS/CMVSS requirements where applicable. Size: 6-7/8" x 2-5/16".
Optronics Stl72Rk Waterproof Stop & Turn Led Oval Tail Light Kit, Polycarbonate Lens & Housing - Stl74Rkbp - 158-Stl74Rkbpf1
LED stop and turn tail light kit has 10 super diodes, 6" polycarbonate housing/lens with rubber grommet and straight 3-pin pigtail. Waterproof sealed lights. Includes mounting hardware. Conforms to DOT/SAE/FMVSS/CMVSS requirements where applicable. Size: 6-7/8" x 2-5/16".
Outdrive Gasket - 18-2699 - 47-2699F1
Use 18-2362 mounting nuts.Contains: O-ring SIE 7513 and 2 outdrive seals SIE 2996.
Outdrive Gasket Set Merc. 27-64818A3 - 18-2619-1 - 47-26191F1
Outdrive Seal - 18-1240 - 47-1240F1
Mercruiser: For Bravo. Replaces 12708.
P Impeller Kit W/O-Ring - 08000K - 762-08000Kf1
Neoprene maximum temperature 130°F. Part numbers ending in "K" designate impeller kits which include impeller, gasket and O-ring.
P/T Hose Connector Gasket@2 - 988231 - 710-27-988231F1
P5000Idf Efi Generator Epa/Carb - A075C500 - 515-A075C500F1
P95 Particulate Filters (10/Box) - 5P71 - 71-5P71F1
Particulate Filter
Pacific Coast White Gal Pmg - 45075.9193.9.424 - 96-T9193Gf1
Paint Edp Prop Black Canada Ss<802878Q50 - - 710-92-8M0225558F1
Panel Mount Hi Amp Gasket Circuit Breaker - 420860-1 - 354-4208601F1
Panther 2 Stroke Outboard Motor Bracket Max 10 Hp, 14" Lift, Stainless Steel - 550010 - 781-550010F1
Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. 8.-1/2" x 10-1/2" mounting pad. For 2-Stroke motors only, Not recommended for 4-Stroke outboards.
Panther 2 Stroke Outboard Motor Bracket Max 12 Hp, 14" Lift, Aluminum - 550012 - 781-550012F1
Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
Panther 2 Stroke Outboard Motor Bracket Max 20 Hp, 11" Lift, Aluminum - 550021 - 781-550021F1
Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
Panther 4 Stroke Outboard Motor Bracket Max 15 Hp, 10" Lift, Aluminum - 550407Al - 781-550407Alf1
Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 4-position lock bar allows for installation flexibility for either long or short shaft motors.
Panther 4 Stroke Outboard Motor Bracket Max 15 Hp, 11" Lift, Stainless Steel - 550408Ss - 781-550408Ssf1
Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 5-position lock bar allows for installation flexibility for either long or short shaft motors.
Panther 4 Stroke Outboard Motor Bracket Max 35 Hp, 10" Lift, Aluminum - 550410 - 781-550410F1
The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 5 vertical running positions.
Panther 4 Stroke Outboard Motor Bracket Max 35 Hp, 16" Lift, Aluminum - 550416 - 781-550416F1
The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 4 vertical running positions.
Panther 550024 2 Stroke Fixed Mount Outboard Motor Bracket Max 12Hp, 85 Lbs. - 550024 - 781-550024F1
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket.Use of a safety cable is recommended. (not included)
Panther Blue Polypropylene 3/8" Anchor Rope Includes No-Tie Rope Cleat And Snap Hook - 757000 - 781-757000F1
Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene it has an amazing tensile strength of 2800 lbs. Comes packaged with a no-tie rope cleat and snap hook.
Panther Blue Polypropylene 3/8" Anchor Rope Includes No-Tie Rope Cleat And Snap Hook - 757010 - 781-757010F1
Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene it has an amazing tensile strength of 2800 lbs. Comes packaged with a no-tie rope cleat and snap hook.
Panther Model 45 Auxiliary Motor Lift For 4 Stroke Motors Up To 35 Hp - 550045A - 781-550045Af1
This electro-hydraulic bracket totally eliminates the stress and strain of raising and lowering your auxiliary motor. With 15.5" of vertical lift you can set your motor to exactly the right height with the push of a button. Sturdy aluminum construction and powder coated with stainless steel hardware for years of trouble free operation and includes 25' of wiring, relays, and switches for a complete installation. Optional wireless control available (#550105).
Panther Swim Platform Outboard Motor Bracket For 2 And 4 Stroke Motors Up To 15 Hp - 55-0030 - 781-550030F1
Adjustable outboard motor bracket designed to mount on most swim platforms. Rated for 2- and 4-stroke. Constructed of hard-coat anodized aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimal prop depth and performance. Constructed of anodized aluminum. Comes complete with transom support bar for weight support torque resistance. Stainless Steel mounting hardware included. (Do not use without the included Panther 550415 safety cable.)
Par 5 12V Sealed Beam Replacement Bulb - 67296-0000 - 6-672960000F1
Parfit™ Gasoline Filter - Pff5510 - 62-Pff5510F1
The PFF5510 gasoline fuel filter/water separator replaces standard fuel filters. It fits these popular engine applications with it's 11/16"-16 center threads and features 10 micron Aquabloc® II media to outperform other gasoline fuel filters in inboard or outboard, two or four cycle applications. Performance exceeds all OEM requirements, and is suitable for all low or high pressure injection systems. Provides a durable, high performance filter element that is treated inside and out with a highly corrosion resistant coating to eliminate rust-through.
Patrol 55L Ocean Insulated Ice Chest - 9600029271 - 51-9600029271F1
Pcm Propulsion Control Module Mercury Mercruiser - 865364T02 - 710-865364T02F1
Pcm Propulsion Control Module Mercury Mercruiser - 865852T05 - 710-865852T05F1
Pcm Propulsion Control Module Mercury Mercruiser - 865857T05 - 710-865857T05F1
Pennzoil Premium Plus Tcw-3 2-Cycle Outboard Oil - 550045220 - 285-550045220F1
Pennzoil 2-cycle premium plus outboard marine oil for outboard motors is specially designed for 2-cycle gasoline marine applications and formulated to help protect outboard engines under the most severe operating conditions. This oil is compatible with Johnson/Evinrude, Mercury, Yamaha, Suzuki, Nissan, Force/US Marine, Mariner, Sears and all other manufacturers requiring NMMA TC-W3 oil.
Perko 0284Dp0Clr Spare Stern Light Lens & Gasket, Clear - 0284Dp0Clr - 9-0284Dp0Clrf1
Fits 0939 & 0265 lights.
Perko 0946Dp099A Lens & Gasket For 946 - 0946Dp099A - 9-0946Dp099Af1
Lens & Gasket for 946
Perko Sealed Fill Cap W/Vpr, Chrome/Bronze - 0660Dpg99A - 9-0660Dpg99Af1
EPA Complaint Sealed Cap with Vacuum/Over Pressure Relief Valve
Perko Sealed Fill Cap W/Vpr, Stainless Steel - 0782Dpg98S - 9-0782Dpg98Sf1
EPA Complaint Sealed Cap with Vacuum/Over Pressure Relief Valve
Permatex 25224 The Right Stuff Gasket Maker, 7 Oz. - 25224 - 180-25224F1
Return equipment to service immediately when you make leak-proof gaskets in just one minute with the Right Stuff.® This latest elastomeric rubber gasket technology is blowout resistant and outperforms pre-cut gaskets. Resists ATF, coolant, oil and other shop fluids. Protects against leaks caused by vibration and thermal expansion. Sensor-safe.
Permatex 51813 50 Ml. 518 Gasket Maker - 51813 - 180-51813F1
Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service.
Permatex 51817 6 Ml. 518 Gasket Maker - 51817 - 180-51817F1
Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service.
Permatex 54540 Pneumatic / Hydraulic Sealant, 36 Ml. - 54540 - 180-54540F1
Designed for locking and sealing high pressure hydraulic and pneumatic systems, Pneumatic/Hydraulic Sealant contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Reliably cures on "as received" fasteners and controlled locking strength affords easy disassembly. Suggested Applications: Hydraulic line fittings, brake fittings, transmission fluid fittings, PTO fittings.
Permatex 56521 High Performance Thread Sealant, 50 Ml. - 56521 - 180-56521F1
Industrial grade, specifically designed for metal and tapered pipe thread fittings. Replaces thread sealant tape or pipe dopes. Cures rapidly to prevent galling and protect mated thread areas from rust and corrosion.
Permatex 57535 Seal & Lock Thread Compound, 1.18 Fl. Oz. - 57535 - 180-57535F1
Permatex™ Seal + Lock Thread Compound combines the power of a thread sealant and a threadlocker into one. Current products on the market can only seal or lock, but Permatex has created a product that does both. With this hybrid thread compound, sealed connections will not loosen and locked fittings will not leak.
Permatex 80007 Form-A-Gasket No. 1, 1.5 Oz. - 80007 - 180-80007F1
No. 1 sealant is fast drying and hard-setting for sealing rigid materials, flanges and patching holes and joints. Resists common shop fluids and fuels. Temperature range -65° F to 400° F.
Permatex 80008 Form-A-Gasket No. 1, 3 Oz. - 80008 - 180-80008F1
No. 1 sealant is fast drying and hard-setting for sealing rigid materials, flanges and patching holes and joints. Resists common shop fluids and fuels. Temperature range -65° F to 400° F.
Permatex 80015 1.5 Oz Form-A-Gasket #2 - 80015 - 180-80015F1
Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels. Use where sealing is more important than adhesion
Permatex 800163 Oz. Form-A-Gasket #2 - 80016 - 180-80016F1
Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels. Use where sealing is more important than adhesion
Permatex 80902 Vinyl & Leather Repair Kit - 80902 - 180-80902F1
A complete repair kit for marine, home and automotive vinyl and leather upholstery. Kit contains: heat transfer tool, 7 OEM color compounds, clear vinyl adhesive and filler (net .34 fl. oz), grain pattern paper, plastic spatula.
Permatex 81158 Black Silicone Adhesive Sealant, 3 Oz. - 81158 - 180-81158F1
General-purpose, Black RTV indoor/outdoor sealant. Seals; bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. Protects and repairs electrical wiring. Waterproof and flexible. Temperature range -80° F to 450° F; resists oil, water, weather, vibration and grease.
Permatex 81630 Ultra Red High Temperature Gasket Maker, 3 Oz. - 81630 - 180-81630F1
High Performance low-odor formulation. Red RTV. Ultra Red resists temperatures up to 650° F (343° C). This high temperature gasket maker is resistant to high thermal cycling and is sensor-safe, non-corrosive RTV. Can be used in replacement of pre-cut gaskets. Ideal for high-temperature applications such as the exhaust manifold, header, turbochargers and slip-fit exhaust parts.
Permatex 81724 Ultra Blue® Multipurpose Rtv Silicone Gasket Maker, 3.35 Oz. - 81724 - 180-81724F1
Sensor-safe, low odor, non-corrosive. Outstanding oil resistance and joint movement valves. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -75° F to 500° F intermittent; resists auto and shop fluids and vibration.
Permatex 81781 Pro Style Vinyl & Leather Repair Kit - 81781 - 180-81781F1
Kit contains: plug-in electric heat tool, 7 OEM color compounds, clear vinyl adhesive and filler (net .34 fl oz), grain pattern paper, metal spatula, plastic dashboard hardening powder. Use on marine upholstery, dashboards, vinyl tops.
Permatex 81878 Ultra Copper® Hi-Temp Rtv Silicone Gasket Maker, 3 Oz. - 81878 - 180-81878F1
For 4-cylinder, turbocharged or high performance engines. Sensors safe, low odor, non-corrosive. Superior adhesion. Temp range -75° F-700° F. Perfect for exhaust manifolds/headers, valve covers, oil pan, timing covers, water pumps, thermostat housings.
Permatex 82180 Ultra Black® Oil Resistant Rtv Silicone Gasket Maker - 82180 - 180-82180F1
Permatex Ultra Black OEM silicone. Fast curing formula. Sensor safe, low odor, non corrosive. Meets performance specs of OE silicone gaskets.
Permatex 90217 Fiberglass, Porcelain, Plastic Repair Kit 1.6 Oz - 90217 - 180-90217F1
For repairing small holes and cracks on porcelain, fiberglass, plastic and ceramic materials. Multipurpose color applications for white or almond surfaces. Use it to repair nicks in toilets, sinks, tile, surrounds, spa tubs, figurines, bathtubs, shower stalls and more! Easy-to-use kit comes with everything you need for a full repair.
Permatex Ptx14H Thread Sealant With Ptfe, 118 Ml. - 80634 - 180-Ptx14Hf1
Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings. White general purpose thread sealant out-performs tapes and pipe dopes. Resists pressure in air, oil, diesel fuel & hydraulic systems. Remains pliable & is easily removed with hand tools. Temperature range: -54°c to 150°c (-65°f to 300°f).
