Select Category
Engine & Fuel
Reverso Op-7 Oil/Diesel Transfer Impeller Pump - Op-7-12 - 676-Op712F1
The OP-7 is a self-priming impeller pump for diesel or oil transfer. The pump is ideal for completing oil changes on generators and boat engines. Flow direction is reversible with the integrated switch and it is designed for discontinuous use.
Ribbed Foam D Seal 1 X1 X10' Black W/Hats Red Tape Boxed - 018-206-10 - 112-01820610F1
Ribbed Seal 3/16 X3/8 X20' Peel N Stick .25 Hats Tape Boxed - 018-392-20 - 112-01839220F1
Rm,Ph-Dress 150 4 Stroke - 8M0227269 - 714-61-8M0227269F1
Roch Mercarb 2Bbl Elec Choke Ke<70125A 1 - 70125A02 - 710-70125A02F1
Rochester 2 Bbl Base Gasket - 64692 - 710-27-64692F1
Rocker Cover Gasket - 827154 - 710-27-827154F1
Rocker Cover Gasket @2 Mcm 3.7L 1976-89 - 73666 - 710-27-73666F1
Rocker Cover Gasket Gm V-8 283/305/327/350 - 11999 - 710-27-11999F1
Rocker Cover Gasket Mcm - 814703 - 710-27-814703F1
Rocker Cover Gasket Mcm Ss<27-806452 - 851040 - 710-27-851040F1
Rocker Cover Gasket Ss<27-811588 - 8M0092920 - 710-27-8M0092920F1
Rockford Fosgate M2D412S Dvc 2? Color Optix™ Sealed Enclosure Marine Subwoofer, 12" W/ White & Stainless Grills - M2D4-12S - 227-M2D412Sf1
DVC 2-Ohm Color Optix marine subwoofer is optimized for small sealed enclosuresUltra-bright wide-angle RGB LEDs provide rich, reliable illuminationConnects with the optional Color Optix Controller and RF Connect App to customize your color patternsEquipped with a VersaSwitch to make easily change impedance between 1 and 4 ohmsElement Ready design and IP67 certification protects from UV rays and water sprayFull 2-year warranty
Rod Holder Cap & Gasket Kit - 0480Dp0Blk - 9-0480Dp0Blkf1
Soft black flange gasket with integral flip-up cap and soft black lip. Use as replacement or as upgrade for older holders.
Rod Holder Cap & Gasket Kit - 0481Dp0Blk - 9-0481Dp0Blkf1
Soft black flange gasket with integral flip-up cap and soft black lip. Use as replacement or as upgrade for older holders.
Roof Seal White Tape - Rsw-6-50 - 707-Rsw650F1
Seal any rip, tear, or open seam in any surface with RoofSeal. RoofSeal is the best solution for leak repair. It is the choice of professional roof repair specialists, on virtually all roof types including EPDM, TPO, Hypalon, most PVC, modified, all metals, even copper and Kynar coated metals, tile, wood, concrete, etc. RoofSeal even works great on land-fill and pond liners. Our specialized backing has proven to be UV stable, even after 19 years in full sunlight. Our MicroSealant has a built in primer which allows RoofSeal to bond with the surface it is installed on. Perfect for re-seaming all roofs, regardless of the material. RoofSeal makes a permanent water-tight seal.
Rotary Tilt Zerotorque Steering Helm - T83Fc - 216-T83Fcf1
For the ultimate in driving comfort these tilt steering helms feature a 5 position tilt range, and the Planetary Gear design which delivers responsive steering with reduced rudder torque. The patented clutch on the ZeroTorque T83FC helm makes it an ideal choice for outboards and other applications with moderate torque. These helms are intended for use with the Uflex M66 steering cable and X52 tilt assembly. Not intended for use on applications where the horsepower exceeds the rating of the boat. X52 Tilt mechanism must be ordered separately. Features: Tilt range of 48° and five locking positionsTilt device eliminates underdash movementStandard 3/4" tapered shaft - stainless steelCorrosion resistant materialsLock-to-lock steering wheel turns: approx. 3.8Stroke: 9"Maximum allowable steering wheel diameter: 16"Minimum steering cable bend radius: 7.9"
Rotella® T6 Synthetic Heavy Duty Engine Oil, 5W40, 18.9 Liters - 550046217 - 852-550046217F1
The Energized Protection® of Shell Rotella® heavy duty diesel engine oil controls acid, deposit and wear. Maximum protection, delivering better wear protection and fuel economy.
Rotella® T6 Synthetic Heavy Duty Engine Oil, 5W40, 5 Liters - 550045390 - 852-550045390F1
The Energized Protection® of Shell Rotella® heavy duty diesel engine oil controls acid, deposit and wear. Maximum protection, delivering better wear protection and fuel economy. Sold in case packs only.
Rotor - 23-2803 - 47-232803F1
Rotor Fits with 4.5 BCGB(60Hz)/3.75 BCGB(50Hz), 4.5 BCGTC(60Hz)/3.75 BCGTC(50Hz), 5.0 BCG(60Hz)/4.2 BCG(50HZ), 5.0 BCGA(60Hz)/5.2 BCGA(50Hz), 7.0 BCGB(60Hz)/6.0 BCGB(50Hz), 7.0 BCGC(60Hz)/5.9 BCGC(50Hz), 7.2 BCGTC(60Hz)/6.0 BCGTC(50Hz), 8.0 BEG(60Hz)/6.4 BEG(50Hz), 9.6 BCGTC(60Hz)/8.0 BCGTC(50Hz),10.0 BEG(60Hz)/8.0 BEG(50Hz), 12.5 BEG(60Hz)/10.0 BEG(50Hz), 15.0 BEG(60Hz)/12.0 BEG(50Hz), 5.0 SBCG(60Hz) / 4.0 SBEG(50Hz), 6.5 SBCG(60Hz) / 5.4 SBCG(50Hz), 8.0 SBEG(60Hz) / 6.4 SBEG(50Hz), 10.0 SBEG(60Hz) / 8.0 SBEG(50Hz), 12.5 SBEG(60Hz) / 10.0 SBEG(50Hz), 14.0 SBEG(60Hz) / 11.6 SBEG(50Hz)
Rotor 3.5K 4.2 10 Hat Style Kodiak - 070-Rtr-10-D - 641-070Rtr10Df1
Rotor 6K 12 Hat Style Kodiak - 070-Rtr-12-D - 641-070Rtr12Df1
Rotor Delco Hei Ign Ss<898253009 - 8M6001252 - 710-8M6001252F1
Rotor Delco Hei Ign Ss<898253012 - 8M0062084 - 710-8M0062084F1
Rotor Delco Ign Ss<898253008 - 8M6001251 - 710-8M6001251F1
Rotor Ecm 555 Ss<8M6001222 - 8M0215004 - 710-8M0215004F1
Rotor Gm 4Cyl Delco Est Ign Ss<898253011 - 8M6001254 - 710-8M6001254F1
Rotor Thunder Iv&V Hei Ign Ss<13524Q06 - 13524A6 - 710-13524A 6 Superseded By: 710-13524A6F1
Rotor Thunder Iv&V Hei Ign Ss<13524Q06 - 13524A6 - 710-13524A6F1
Rotor-Delco Hei Ign Ss<898253010 - 8M6001253 - 710-8M6001253F1
Rubber Gasket For Sizes 9 8 & 10 - 0493Dp999R - 9-0493Dp999Rf1
Rubber Gasket Kit For Sizes 4 & 5 - 0493Dp599R - 9-0493Dp599Rf1
Rubber Gasket Kit For Sizes 6 & 7 - 0493Dp799R - 9-0493Dp799Rf1
Rubex Prop Display Rack Bell Ma Fly - 9990245 - 496-9990245F1
Safe-Skeg, Volvo Sx & Duo-Prop - 35Ss655 - 781-35Ss655F1
Ultimate Skeg Protection! Ideal if you're looking to protect your new skeg, repair your damaged one or just add some shine.
Safe-T-Alert 62541 62 Series Carbon Monoxide Alarm, Surface Mt, White - 62-541-Wt-Marine - 270-62541Wtmarinef1
Space Saving. Compact design Space Saving. Compact designIdeal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, Truck & Folding CampersAlarm Mute button silences alarm while RV is ventilatedRapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remainMemory Scan™. Retains the CO level that activated the alarm12 Volt power means no missing or dead batteries to replaceMeets RVIA/NFPA requirements
Safe-T-Alert 62541Bl 62 Series Surface Mount Carbon Monoxide Alarm, Black - 62-541-Bl - 270-62541Blf1
Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remainMemory Scan™ Retains the CO level that activated the alarm12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Safe-T-Alert 62541Wt 62 Series Surface Mount Carbon Monoxide Alarm, White - 62-541-Wt - 270-62541Wtf1
Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remainMemory Scan™ Retains the CO level that activated the alarm12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Safe-T-Alert 62542Bltr 62 Series Surface Mount Carbon Monoxide Alarm, Black With Trim Ring - 62-542-Bl-Tr - 270-62542Bltrf1
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.Memory Scan™ Retains the CO level that activated the alarm.12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Safe-T-Alert 62542Wttr 62 Series Surface Mount Carbon Monoxide Alarm, White With Trim Ring - 62-542-Wt-Tr - 270-62542Wttrf1
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. Compact size, designed for the rugged RV EnvironmentAdvanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.Memory Scan™ Retains the CO level that activated the alarm.12 Volt power means no missing or dead batteries to replaceLow Current Draw(37 mA). Innovative micro current circuit saves battery powerOperating Temperature: -40°F to +158°FApproved. Meets RVIA/NFPA requirements
Sanipotie 5 Gal Replaces P/N 51-301096602 - 9108552678 - 51-9108552678F1
Scandvik 41388P Ignition Protected 12V Led Engine Room Light - 41388P - 390-41388Pf1
USCG Certified Ignition Protected (SAE J1711) Surface Mount36 each 2835 LEDsBeam Angle: 180°Wire can exit from bottom or end of fixtureMounting Hardware included
Scandvik 41389P Ignition Protected 12/24V Led Engine Room Light - 41389P - 390-41389Pf1
These super bright LED lights are excellent engine room and utility lights. 10-30VDC has 50 2835 LED's. USCG Certified Ignition Protected (SAE J1711). Wire can exit from bottom or end of fixtureSurface MountBeam Angle: 180°Mounting Hardware includedIP68 Rated
Scandvik 41640P Strip Led Light W/Gasket, 4" - 41640P - 390-41640Pf1
Use with or without the included gasket. The gasket has a channel to route wires out the back or to the end of the fixture. This surface mount light is perfect for under gunnel and wet locker installations. IP67. (Warm White 2900-3200K).
Scandvik 41644P Strip Led Light W/Gasket, 8" - 41644P - 390-41644Pf1
Use with or without the included gasket. The gasket has a channel to route wires out the back or to the end of the fixture. This surface mount light is perfect for under gunnel and wet locker installations. IP67. (Warm White 2900-3200K).
Scandvik 50030 Breeze Power-Seal® Perforated Hose Clamp, #6, 10/Box - 50030 - 390-50030F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50031 Breeze Power-Seal® Perforated Hose Clamp, #8, 10/Box - 50031 - 390-50031F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50032 Breeze Power-Seal® Perforated Hose Clamp, #10, 10/Box - 50032 - 390-50032F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50033 Breeze Power-Seal® Perforated Hose Clamp, #12, 10/Box - 50033 - 390-50033F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50034 Breeze Power-Seal® Perforated Hose Clamp, #16, 10/Box - 50034 - 390-50034F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50035 Breeze Power-Seal® Perforated Hose Clamp, #20, 10/Box - 50035 - 390-50035F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50036 Breeze Power-Seal® Perforated Hose Clamp, #24, 10/Box - 50036 - 390-50036F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50037 Breeze Power-Seal® Perforated Hose Clamp, #28, 10/Box - 50037 - 390-50037F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50040 Breeze Power-Seal® Perforated Hose Clamp, #40, 10/Box - 50040 - 390-50040F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50041 Breeze Power-Seal® Perforated Hose Clamp, #44, 10/Box - 50041 - 390-50041F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50042 Breeze Power-Seal® Perforated Hose Clamp, #48, 10/Box - 50042 - 390-50042F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50043 Breeze Power-Seal® Perforated Hose Clamp, #52, 10/Box - 50043 - 390-50043F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50044 Breeze Power-Seal® Perforated Hose Clamp, #56, 10/Box - 50044 - 390-50044F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50045 Breeze Power-Seal® Perforated Hose Clamp, #60, 10/Box - 50045 - 390-50045F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50048 Breeze Power-Seal® Perforated Hose Clamp, #72, 10/Box - 50048 - 390-50048F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scandvik 50049 Breeze Power-Seal® Perforated Hose Clamp, #80, 10/Box - 50049 - 390-50049F1
A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength. 1/2" band with arcial perforations, quadra-lock construction, SAE standard J1508 type F, 5/16" hex screw, 1/2" band and two-piece housing all in 316 stainless steel.
Scanstrut Ds16P Plastic Multi Cable Deck Seal, Grey - Ds16-P - 922-Ds16Pf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds16Pblk Plastic Multi Cable Deck Seal, Black - Ds16-P-Blk - 922-Ds16Pblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds16S Stainless Multi Cable Deck Seal - Ds16-S - 922-Ds16Sf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds21Ap Plastic Multi Cable Deck Seal, Grey - Ds21A-P - 922-Ds21Apf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds21Apblk Plastic Multi Cable Deck Seal, Black - Ds21A-P-Blk - 922-Ds21Apblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds21As Stainless Multi Cable Deck Seal - Ds21A-S - 922-Ds21Asf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds21Bp Plastic Multi Cable Deck Seal, Grey - Ds21B-P - 922-Ds21Bpf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds21Bpblk Plastic Multi Cable Deck Seal, Black - Ds21B-P-Blk - 922-Ds21Bpblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds21Bs Stainless Multi Cable Deck Seal - Ds21B-S - 922-Ds21Bsf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds30P Plastic Multi Cable Deck Seal, Grey - Ds30-P - 922-Ds30Pf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds30Pblk Plastic Multi Cable Deck Seal, Black - Ds30-P-Blk - 922-Ds30Pblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds30S Stainless Multi Cable Deck Seal - Ds30-S - 922-Ds30Sf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds40P Plastic Multi Cable Deck Seal, Grey - Ds40-P - 922-Ds40Pf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds40Pblk Plastic Multi Cable Deck Seal, Black - Ds40-P-Blk - 922-Ds40Pblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds40S Stainless Multi Cable Deck Seal - Ds40-S - 922-Ds40Sf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds6P Plastic Multi Cable Deck Seal, Grey - Ds6-P - 922-Ds6Pf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Ds6Pblk Entry Cable Seal, Vertical Entry - Ds6-P-Blk - 922-Ds6Pblkf1
For cables from 2-6mm (0.08"-0.24"), an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly. Watertight InstallationTapered bung forms a watertight seal. all units are supplied with a closed-cell base seal - 100% waterproof. All models have been IP68 tested and approved. Easy and Reliable InstallationCaptive nuts make for easy assembly and also allow reliable repeat installations. Each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible. Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant design (no sharp edges to hit your foot on!) and outer dome provides additional water shield. Easy fit cable routing that cuts down your installation timeA guaranteed 100% watertight sealDesigned for a range of cable diametersPerfect for solar panels, light bars, lights and other rooftop electronicsThe low-profile construction is impact resistant and provides extra protection from waterCaptive nuts make for easy assembly and also allow for reliable repeat installationsOur materials have been selected to be UV- stable and hard-wearingNo messy sealant on bungs
Scanstrut Dsh10 Plastic Multi Cable Deck Seal, Grey - Ds-H10 - 922-Dsh10F1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsh10Blk Plastic Multi Cable Deck Seal, Black - Ds-H10-Blk - 922-Dsh10Blkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsh6 Plastic Multi Cable Deck Seal, Grey - Ds-H6 - 922-Dsh6F1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsh6Blk Entry Cable Seal, Horizontal Entry - Ds-H6-Blk - 922-Dsh6Blkf1
For cables from 2-6mm (0.08"-0.24"), an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly. Easy fit cable routing that cuts down your installation timeA guaranteed 100% watertight sealDesigned for a range of cable diametersPerfect for solar panels, light bars, lights and other rooftop electronicsThe low-profile construction is impact resistant and provides extra protection from waterCaptive nuts make for easy assembly and also allow for reliable repeat installationsOur materials have been selected to be UV- stable and hard-wearingNo messy sealant on bungs
Scanstrut Dshd10Blk Plastic Double Cable Deck Seal, Black - Ds-Hd10-Blk - 922-Dshd10Blkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dshd6Blk Plastic Double Cable Deck Seal, Black - Ds-Hd6-Blk - 922-Dshd6Blkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsmulti Aluminum Multi Cable Deck Seal, Grey - Ds-Multi - 922-Dsmultif1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsmultipblk Plastic Multi Cable Deck Seal, Black - Ds-Multi-P-Blk - 922-Dsmultipblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Sccw10Gt Cove Led Wireless 15W 3-Coil Charger,12/24V - Sc-Cw-10Gt - 922-Sccw10Gtf1
The pioneering three-coil Cove charger is designed to revolutionize your charging experience. Cove is perfect for integration into consoles, seating, cabinetry, and more! Simply slide your phone into the pocket and instantly start wirelessly charging. IPX6 WaterproofQi compatibleStore and ChargeInput Voltage Range: 10-30V DC (12/24V system)Three overlapping charging coils maximize performanceNo alignment is needed, throw your phone into the charger and your phone will always charge!Uninterrupted charging during outdoor adventuresRear installation light, for testing power & correct wiring
Scanstrut Sccw1Gt Hidden Wireless 15W 3-Coil Charger, 12/24V - Sc-Cw-1Gt - 922-Sccw1Gtf1
Engineered to be installed under the surface, leaving the top surface uncluttered. The pioneering three-coil hidden charger is designed to revolutionize your charging experience. Mounted underneath your selected surface, Hidden 3 Coil gives a sleek and ultra-clean aesthetic. With the option of having a rubber grip to showcase location or to go ultra-minimal, you could etch a marker or logo to showcase placement for your phone. The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location. Additionally, the built-in heat management system adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.
Scanstrut Sccw2Gt Surface Wireless 15W 3-Coil Charger - Sc-Cw-2Gt - 922-Sccw2Gtf1
The pioneering 15W 3 coil surface charger is designed to revolutionize your charging experience. This waterproof and wireless charger can be fitted to any smooth surface, indoors or outdoors.Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone, to ensure a constant charge, no matter the adventure or the placement of the phone on the charger. No sealant is required! Simply route out the required shape with our handy template and use the 3M tape on the underside of the charger to adhere to your surface. LED lights for fast visual of charging status.
Scanstrut Sccw7Gt Sub Wireless 15W 3-Coil Charger, 12/24V - Sc-Cw-7Gt - 922-Sccw7Gtf1
The pioneering three-coil sub-charger is designed to revolutionize your charging experience. Sunk into any surface with foam overlay on top or installed on top of the surface, the sub offers unparalleled ease of use whilst keeping your aesthetics looking flush and clean. The built-in heat management system also adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go. IPX6 WaterproofQi compatibleInput Voltage Range: 10-30V DC (12/24V system)Three overlapping charging coils maximize performanceTop install or flush installation optionsNo alignment is needed, throw your phone on the charger and your phone will always charge!Uninterrupted charging during outdoor adventuresSimple one-cut installation
Scanstrut Sccw9Gt Cove Wireless 15W 3-Coil Charger,12/24V - Sc-Cw-9Gt - 922-Sccw9Gtf1
The pioneering three-coil Cove charger is designed to revolutionize your charging experience. Cove is perfect for integration into consoles, seating, cabinetry, and more! Simply slide your phone into the pocket and instantly start wirelessly charging. IPX6 WaterproofQi compatibleStore and ChargeInput Voltage Range: 10-30V DC (12/24V system)Three overlapping charging coils maximize performanceNo alignment is needed, throw your phone into the charger and your phone will always charge!Uninterrupted charging during outdoor adventuresRear installation light, for testing power & correct wiring
Scepter 04068 Fuel Fitting-Tank Brp Male - 4068 - 770-04068F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 04075 Fuel Tank Fitting, Yamaha Brass Male - 4075 - 770-04075F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05787 Fuel Fitting-Brp Female - 5787 - 770-05787F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05791 Fuel Fitting-Mercury Eng Clip - 5791 - 770-05791F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05793 Fuel Fitting-Mercury Tank Clip - 5793 - 770-05793F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05813 Fuel Tank/Engine Fitting, Yamaha Brass Female - 5813 - 770-05813F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05815 Fuel Tank/Engine Fitting, Yamaha Brass Female - 5815 - 770-05815F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05822 Fuel Fitting-Brp Female - 5822 - 770-05822F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05827 Fuel Fitting-Honda Tank Female - 5827 - 770-05827F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05837 Fuel Fitting-Tank Mercury Clip Type - 5837 - 770-05837F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05869 3/8" Primer Bulb - 5869 - 770-05869F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 07482 Fuel Line Assembly, Mercury, ('98 & Newer) - 7482 - 770-07482F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07483 Fuel Line Assembly, Mercury Cast/Aluminum Bayonet Style - 7483 - 770-07483F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07485 Fuel Line Assembly, Universal - 3/8" Id X 80" L - 7485 - 770-07485F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07486 Fuel Line Assembly, Johnson/Evinrude - 7486 - 770-07486F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07489 Fuel Line Assembly, Yamaha - 7489 - 770-07489F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07491 Fuel Line Assembly, Universal - 5/16" Id X 80" L - 7491 - 770-07491F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07494 5/16" Primer Bulb - 7494 - 770-07494F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 07497 Fuel Fitting-Mercury Tank Bayonet, Metal - 7497 - 770-07497F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 07813 1/4" Primer Bulb - 7813 - 770-07813F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 08580 Oem Choice Portable Fuel Tank, 6.6 Gal - 8580 - 770-08580F1
Sold around the world by leading outboard engine manufacturers like Tohatsu, Honda, Mercury, Yamaha and Suzuki. Trusted OEM choice for portable marine fuel tanks. Made of UV Stabilized, Rust and Corrosion Resistant HDPE for Maximum Durability2-Way Vented CapIncludes a universal 1/4" NPT fuel pick-up adapterMechanical direct sight gauge with easy-to-read indicatorISO & CSA certified, UL listedEPA/CARB Compliant
Scepter 09315 Epa/Carb Replacement Cap With Chain And Tether (Fits All Scepter Epa Portable Tanks) - 9315 - 770-09315F1
EPA/CARB approved cap with chain & tether. Fits all Scepter EPA portable tanks.
Scepter 09476 Fuel Fitting-Mercury Engine Bayonet - 9476 - 770-09476F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 11522 Fuel Line Assembly, Universal 3/8" X 7' - 11522 - 770-11522F1
^EPA COMPLIANT/CARB CERTIFIEDProvides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications^08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter 11553 Fuel Connector, Quick Universal 3/8" Barb Female 1/4" Npt Male Stainless Steel - 11553 - 770-11553F1
OEM Choice! You will enjoy the confidence of knowing you're buying the same OEM quality in aftermarket replacement parts that are supplied to original equipment manufacturers. Scepter products meet or exceed government emissions regulations, helping to improve air quality and reduce exposure to toxic chemicals.
Scepter Csa Underseat Portable Fuel Tank-International Use, 3-Gal/11.4L - 10504 - 770-10504F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fi ttingsSturdy constructionSeamless one-piece polyethylene tank shell constructionAdvanced styling / highly functional designInternational tanks (Not ECO Check) meet CSA standards
Scepter Csa Underseat Portable Fuel Tank-International Use, 6 Gal/22.7L - 10509 - 770-10509F1
Convenient combination fuel pick-up / sight gaugeMolded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fi ttingsSturdy constructionSeamless one-piece polyethylene tank shell constructionAdvanced styling / highly functional designInternational tanks (Not ECO Check) meet CSA standards
Scepter Fr1G201 Smartcontrol™ Fuel Container Epa/Carb Compliant, Gasoline, 2 Gal, Red, 9.7"Lx6.9"Wx11.5"H - Fr1G201 - 770-Fr1G201F1
A new generation of gas cans featuring the Scepter SmartControl™ easy pour spout! The SmartControl system easy to use in a durable design. The SmartControl™ delivers fast fills without spills. Easy-push and controllable flow makes filling everything a cleaner, safer, better experience.
Scepter Fsck571 Smartcontrol™ Kerosene Fuel Container, 5 Gal Blue - Fsck571 - 770-Fsck571F1
Scepter® SmartControl™ fuel containers are the next generation of rugged gas cans that provide a clean, fast and hassle-free experience. Featuring a simple spout and flame mitigation device, this product eliminates frustration with an easy-to-use, durable design, and an added layer of protection. The SmartControl fuel container's squeeze controlled flow rate for a cleaner, safer, better experience - without spilling a drop. Easy to Pour Kerosene Can with Rear HandleFast Fills without the SpillsControllable FlowCARB / EPA Compliant
Scepter Jerry Can - Non Carb Compliant, 1-1/4 Gal. - 7081 - 770-07081F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: A reversible self-venting spout - no need to worry about separate vent closuresAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 2.5 Gal. - 7079 - 770-07079F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: A reversible self-venting spout - no need to worry about separate vent closuresAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 5.2 Gal. - 7622 - 770-07622F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: child resistant vent on the handle to improve flow ratesAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 6.6 Gal. - 7539 - 770-07539F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: child resistant vent on the handle to improve flow ratesAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8309 - 770-08309F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8313 - 770-08313F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8316 - 770-08316F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 8190 Topside 12 Gallon Fuel Tank - Not For Sale In The U.S. - 8190 - 770-08190F1
Manufactured from high-density polyethylenewith UV-stabilized resinProvides positive seal with an injection molded 2-1/4" fill neckMechanically vented fuel capFeatures 90°, 1/4" NPT fuel withdrawal elbow (does not rotate)Includes mechanical direct-sight gauge with easy-to-read indicator tested to industry standardsSpecifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. Not for sale in the U.S.
Scepter Marine 8191 Topside 12 Gallon Low Profile Fuel Tank - Not For Sale In The U.S. - 8191 - 770-08191F1
Manufactured from high-density polyethylenewith UV-stabilized resin Provides positive seal with an injection molded 2-1/4" fill neckMechanically vented fuel capFeatures 90°, 1/4" NPT fuel withdrawal elbow (does not rotate)Includes mechanical direct-sight gauge with easy-to-read indicator tested to industry standardsSpecifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. Not for sale in the U.S.
Scepter Marine Primer Bulb - 10543 - 770-10543F1
EPA COMPLIANT/CARB CERTIFIED Maximizes engine performanceGasoline and solvent-resistant constructionDesigned for today's ethanol fuelsHigh flow capacity & dual internal check valves for quick, efficient priming
Scepter Marine Universal Fuel Line Assembly - 8312 - 770-08312F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications
Scepter Marine Universal Fuel Line Assembly - 8318 - 770-08318F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications
Scepter Neptune Portable Fuel Tank - 8590 - 770-08590F1
The "ECO Check" line features a EPA/CARB approved fuel cap and a low permeation tank that virtually eliminates fuel evaporationMolded from UV stabilized, cross-linked polyethyleneAccepts standard 1/4 NPT marine tank fittings
Scepter Neptune Portable Fuel Tank - 8592 - 770-08592F1
The "ECO Check" line features a EPA/CARB approved fuel cap and a low permeation tank that virtually eliminates fuel evaporation Molded from UV stabilized, cross-linked polyethyleneAccepts standard 1/4 NPT marine tank fittings
Scepter Oem Choice Portable Fuel Tank - 8576 - 770-08576F1
Convenient combination fuel pick-up / sight gaugeMolded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scepter Rectangular Portable Fuel Tank - 8667 - 770-08667F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Rectangular Portable Fuel Tank - 8668 - 770-08668F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Rectangular Portable Fuel Tank - 8669 - 770-08669F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Under Seat Portable Fuel Tank - 10506 - 770-10506F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scepter Under Seat Portable Fuel Tank - 10511 - 770-10511F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scotch-Grip™ Rubber & Gasket Adhesive 847 - 19718 - 71-19718F1
A premium quality multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Resistant to most fuels and oil. Heat and solvent reactivatable. Curable with heat.
Scotty 1128 Belt Set For Depthpower Downriggers 2000 & Earlier - 1128 - 736-1128F1
1128: Spare drive belt set (1 large/1 small) for Depthpower electric downriggers. 2000 models and earlier.1129: Single drive belt for Depthpower electric downriggers. 2001 models and later.
Scotty 1129 Belt For Depthpower Downriggers 2001+ - 1129 - 736-1129F1
1128: Spare drive belt set (1 large/1 small) for Depthpower electric downriggers. 2000 models and earlier.1129: Single drive belt for Depthpower electric downriggers. 2001 models and later.
Scotty 2129 Kevlar Drive Belt For Hp Downriggers & #2500 Line Puller - 2129 - 736-2129F1
Kevlar drive belt for HP downriggers & #2500 Line Puller
Scotty Propack 1116 Depthpower 30"-60" Telescopting Electric Downrigger W/Swivel Mt. - 1116 - 736-1116F1
Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min.; 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt250' of 150 lb. test, stainless steel downrigger cable2 10" Tube style rod holdersIncludes Scotty/Marinco™ plug and receptacleThe lowest amperage draw - less than 1/3 than some of the competitionMarine grade stainless steel boom1148 weight storage hookMulti-position auto-stop included (Use 1008 Stopper Beads)Includes 2 Power Grip Plus line releaseIncludes 1023 tilt-up mounting bracketIncludes 1026 swivel mountLimited lifetime warranty
Screen Fuel Fltr 75-600Hp 4Str - 8M0090809 - 710-35-8M0090809F1
Sea Foam Deep Creep Lubricant - Dc14 - 821-Dc14F1
Cleans, penetrates, lubricates and dries, all from a 100% pure petroleum product. For use in all 2- and 4-cycle gas and diesel engines. Spray into carburetor to start engines. Use to clean and lubricate air tools, door locks, and guns. Hundreds of household and shop uses. Deep Creep works with instant action and is oxygen sensor safe.
Sea Foam Sf16 Motor Tune Up, 16 Oz. - Sf16 - 821-Sf16F1
A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2- and 4-cycle. Cleans dirty engine parts internally by removing harmful gums, varnish and carbon build upRemoves moisture from oil crankcases and fuel tanksStabilizes and conditions fuels from becoming staleExcellent for engine storageFor Peak Performance use every 5,000 miles
Sea Foam Sf55 Motor Tune Up, Gal. - Sf128 - 821-Sf128F1
A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2- and 4-cycle. Cleans dirty engine parts internally by removing harmful gums, varnish and carbon build upRemoves moisture from oil crankcases and fuel tanksStabilizes and conditions fuels from becoming staleExcellent for engine storageFor Peak Performance use every 5,000 miles
Sea Water Pump - 807151A12 - 710-46-807151A12F1
Please see manufacturer application guides for complete application references.
Sea Water Pump W/Air Fit Ss<46-8M0137218 - 8M0139997 - 710-46-8M0139997F1
Sea Water Pump-V-8 W/V-Belt - 72774A32 - 710-46-72774A32F1
Please see manufacturer application guides for complete application references.
Sea-Dog 2218401 Stainless Hatch Cover Pull W/O Rubber Gasket - 221840-1 - 354-2218401F1
Highly corrosion-resistant, this hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16" hole. Flange pull is 1-1/4" in diameter x 1/8" thick.
Sea-Dog 221841 Replacement Rubber Gasket Only - 221841 - 354-221841F1
Rubber Gasket Only for hatch cover pull.
Sea-Dog 2218421 Stainless Hatch Cover Pull W/Rubber Gasket - 221842-1 - 354-2218421F1
Highly corrosion-resistant, this hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit, and a rubber gasket to reduce noise and resist water penetration. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16" hole. Flange pull is 1-1/4" in diameter x 1/8" thick.
Sea-Dog 327150 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150 - 354-327150F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 3271501 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150-1 - 354-3271501F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. The two-piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc.
Sea-Dog 327151 Rail Mount Motor Bracket,, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", Black - 327151 - 354-327151F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 364190 Polycarbonate Cover For Poly In-Line Strainer - 364190 - 354-364190F1
Polycarbonate cover for strainer
Sea-Dog 4-Position Ignition Switch - 420356-1 - 354-4203561F1
Stamped brass. Functions: Acc.-Off-Ignition-Start. Rated: Ignition 15 Amp @ 12VDC, Solenoid 30 Amp @ 12VDC, Accessory 15 Amp @ 12VDC.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420385-1 - 354-4203851F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420386-1 - 354-4203861F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4203601 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420360-1 - 354-4203601F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203611 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420361-1 - 354-4203611F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203651 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420365-1 - 354-4203651F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203661 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420366-1 - 354-4203661F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4204871 Safety Ignition Kill Switch - 420487-1 - 354-4204871F1
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. Kill switches include a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Sea-Dog 520021 Replacement Plug And Gasket - 520021 - 354-520021F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Dog 5200211 Replacement Plug And Gasket, Pair - 520021-1 - 354-5200211F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Lect Designs Flush Mount Rod Holder Kit (W/ Gasket & Hardware) - K325162-9 - 680-K3251629F1
Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holder Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holderConstructed of durable Injection Molded ABSKit includes flush mount rod holder (1), gasket w/ cap (1), rod holder leash fitting (1), 10-32 X 1-1/4" OH (3), 10-32 Nyloc nut (3), #10 flat washer (3), #10 well nut (3)A: 9-3/16" / B: 1-5/8" / C: 2-1/2" / D: 2-5/8"Rod Holder made in the USA (Everett, WA)!
Seachoice 1.980" Grease Caps (2 Per Pack) - 53631 - 50-53631F1
Steel caps for most common applicationused in bearing kits.
Seachoice 10 Micron Fuel/Water Separating Filter With See Thru Plastic Bowl For Outboards - 20931 - 50-20931 Superseded By: 50-22303F1
Reusable see-thru plastic bowl with drain, and 10 micron filter (20951).
Seachoice 10' Coiled Extension Cord - 15051 - 50-15051F1
10' Coiled Extension Cord, 12V
Seachoice 11621 3 Position Heavy Duty Ignition Starter Switch - 50-11621 - 50-11621F1
3 Position: Off - Ignition - Start. 15A @ 12V DC. Chrome plated brass face nut and brass back-up nut.. Supplied with two keys. Stainless steel springs. 11621: Mounting stem 1-7/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 1-7/16"L, 13/16" - 20 thread dia. Overall Dimensions: 3-1/4"L; 1-7/16
Seachoice 11641 3 Position Heavy Duty Ignition Starter Switch - 50-11641 - 50-11641F1
3 Position: Off - Ignition - Start. 15A @ 12V DC. Chrome plated brass face nut and brass back-up nut.. Supplied with two keys. Stainless steel springs. 11621: Mounting stem 1-7/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 1-7/16"L, 13/16" - 20 thread dia. Overall Dimensions: 3-1/4"L; 1-7/16
Seachoice 11821 3 Position Magneto Ignition Switch, 6 Screw - 11821 - 50-11821F1
3 Positions: Off - Ignition - Start. "Push to Choke." Includes two keys. Stem Width: 13/16"Ignition: 15 Amps @ 12VSolenoid: 30 Amps @ 12VChoke: 7 Amps @ 12V"
Seachoice 11831 3 Position Magneto Ignition Switch, 6 Wire - 11831 - 50-11831F1
3 Positions: Off - Ignition - Start. "Push to Choke." Includes two keys. Stem Width: 13/16"Ignition: 15 Amps @ 12VSolenoid: 30 Amps @ 12VChoke: 7 Amps @ 12V" 11831 Wires: Red = 12V+, Purple = ignition, Black/Magenta = ground, Black/Yellow = magneto, Yellow/Black = choke
Seachoice 15441 Fuel Gauge, Black Bezel - 15441 - 50-15441F1
15501: Combination of 15421 and 15441. 15421: Fuel Gauge Sender: Adjustable depth from 6" to 27". Fits most tanks. Includes gasket. Resistance value 240 ohms (empty) to 33 ohms (full). 15441: Fuel Gauge: Black bezel low profile fuel gauge for 12V negative ground systems. Use in conjunction with Model 15421 fuel sender. Complete with light kit.
Seachoice 17797 Impeller, F6B Series - 09-812B-1Sc - 50-17797 Superseded By: 50-17783F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17798 Impeller, F4B Series - 09-810B-1Sc - 50-17798 Superseded By: 50-17784F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17799 Impeller, F5B - 09-1027B-1Sc - 50-17799 Superseded By: 50-17786F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17893 Impeller, F5B Series - 09-1027B-10Sc - 50-17893 Superseded By: 50-17787F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17894 Impeller, F35 Series - 09-808B-1Sc - 50-17894 Superseded By: 50-17788F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17896 Impeller, F7 Series - 09-1028Bt-1Sc - 50-17896 Superseded By: 50-17789F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 19173 Small Filter Wrench, 2-3/4" - 3-3/4" - 19173 - 50-19173F1
High-quality steel construction with non-slip comfortable gripHandle swivels 180° to clear obstructions and makes it easy-to-turn in tight spots or hard-to-reach places1" wide band provides strong gripUnique yoke and link assembly allows a strong grip and prevents crushed filtersStudded band for a firm grip and non-slip removalPlated yoke and a blackened band resists rust, oxidation and corrosionFits most standard boat, car and truck filters
Seachoice 19174 Large Filter Wrench, 3-1/4" - 3-7/8" - 191744 - 50-19174F1
High-quality steel construction with non-slip comfortable gripHandle swivels 180° to clear obstructions and makes it easy-to-turn in tight spots or hard-to-reach places1" wide band provides strong gripUnique yoke and link assembly allows a strong grip and prevents crushed filtersStudded band for a firm grip and non-slip removalPlated yoke and a blackened band resists rust, oxidation and corrosionFits most standard boat, car and truck filters
Seachoice 2-Cycle Engine, Oil To Gas Measuring Container, 32 Oz., Wide Mouth Bottle - 21000 - 50-21000F1
This plastic, quart-size bottle lets you add the correct amount of 2-cycle (2-stroke) engine oil needed for the volume of gas in your gas can. Once you know the oil-to-gas ratio for your 2-cycle engine, simply fill your gas can (not included) with gas, then pour the oil into the Seachoice measuring container according to the amount of gas you pumped into the can, and finally, pour the oil from the Seachoice container into your gas can to mix. Gas volume marks on the container are in gallons and liters. Ideal for 100:1, 50:1, 40:1 and 24:1 ratios. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Measure the correct amount of 2-cycle engine oil every timeClear plastic bottle has gas-volume markings in liters and gallonsDetermines ratios for 100:1, 50:1, 40:1 and 24:1 oil-to-gas mixturesDesigned to prevent fouled plugs or seized engines caused by an incorrect amount of oil32-ounce capacity
Seachoice 20291 Gold-Flo High Performance Electronic 34 Gph Fuel Pump Kit 5.5 - 4 Psi - 50-20291 - 50-20291F1
This rugged, lightweight, solid state fuel pump provides the high output performance required by heavy duty construction, agricultural, industrial, marine or military equipment in addition to the power plant requirements of sports cars, sedans, light trucks and SUV's. Compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. 24" Lift. 20291: 1/4 x 18 Thread w/o Shut-Off Valve, 24" Lift Easy to installCoast Guard ignition test approved74 Micron filter includedReliable solid state design provides longer lifeMade in U.S.A. by FACET
Seachoice 20391 Clear Gas & Diesel Fuel Filter For Cube Electronic Fuel Pump Kit, 3/8" - 50-20391 - 50-20391F1
Gasoline And Diesel Fuel Filter for Cube and POSI-FLO® Fuel Pumps.Compatible with gasoline, diesel, biodiesel, E85, and fuel additives. 74 micronInstalls directly to the inlet of the Cube and POSI-FLO® fuel pump8X more total surface area than the 479735 and FEP735 filtersUL ListedClear housing to ensure proper fuel filter maintenanceTorque 10 foot poundsThreads: 1/8"-27
Seachoice 20401 Steel Gas & Diesel Fuel Filter For Cube Electronic Fuel Pump Kit, 5/16" - - 50-20401F1
Gasoline And Diesel Fuel Filter for Cube and POSI-FLO® Fuel Pumps.Compatible with gasoline, diesel, biodiesel, E85, and fuel additives. 74 micronInstalls directly to the inlet of the Cube and POSI-FLO® fuel pump8X more total surface area than the 479735 and FEP735 filtersUL ListedClear housing to ensure proper fuel filter maintenanceTorque 10 foot poundsThreads: 1/8"-27
Seachoice 20711 90 Degree Brass Fuel Elbow - 50-20711 - 50-20711F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20851 90 Degree Brass Fuel Elbow - 50-20851 - 50-20851F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20861 90 Degree Brass Fuel Elbow - 50-20861 - 50-20861F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20871 90 Degree Brass Fuel Elbow - 50-20871 - 50-20871F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20881 90 Degree Brass Fuel Elbow - 50-20881 - 50-20881F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice 20911 Fuel/Water Separator Canister Only - 20911 - 50-20911 Superseded By: 50-20934F1
Universal 3/8" Ports. 20911 Replaces:Seachoice 20911, Valmar 52113, Sierra 7844, Racor PFF 5510, Moeller 03332410, Mercury 35-802893Q01, Marpac 7-0860
Seachoice 20913 Fuel/Water Separator Filter Only - 20913 - 50-20913 Superseded By: 50-20933F1
10 Micron 10 MicronMeets OEM specifications
Seachoice 20914 Fuel/Water Separator Filter Only - 20914 - 50-20914 Superseded By: 50-20936F1
10 MicronMeets OEM specifications
Seachoice 20916 Fuel/Water Separator Filter Only - 20916 - 50-20916 Superseded By: 50-20937F1
10 MicronMeets OEM specifications
Seachoice 20917 Fuel/Water Separator Filter Only - 20917 - 50-20917 Superseded By: 50-20938F1
10 MicronMeets OEM specifications
Seachoice 20937 Fuel/Water Separating Filter - Sfc-85450-V106 - 50-20937F1
Replaces: Volvo: 3852413, 3851218 & 3862228; OMC: 502906; Sierra: 18-7989; Mercury Marine: 35-8M015477210 MicronRemoves water contamination to ensure only clean and pure fuel is delivered to the engineFor use with 2 and 4 stroke outboard enginesWater-shedding Cellulose filter element ensures clean fuelCoated steel canister prevents corrosionProduced in an ISO (TS1649) Certified Facility to meet or exceed industry standards
Seachoice 20951 Fuel Water Separating Filter Only - 20951 - 50-20951 Superseded By: 50-22304F1
10 MicronMeets OEM specifications
Seachoice 21071 Premium Oil Filter - 21071 - 50-21071 Superseded By: 50-21001F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21073 Premium Oil Filter - 21073 - 50-21073 Superseded By: 50-21006F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21074 Premium Oil Filter - 21074 - 50-21074 Superseded By: 50-21007F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21076 Premium Oil Filter - 21076 - 50-21076 Superseded By: 50-21024F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21223 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 3/8" X 50' - 315-0386 - 50-21223F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 21233 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/16" X 50' - 315-0566 - 50-21233F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 21371 Fuel Line Assemblies - Outboard Engines Omc/Johnson/Evinrude, 3/8" X 6' - 21371 - 50-21371F1
Meets all EPA, CARB, USCG and ABYC Requirements Includes: Low permeation primer bulb, fuel line fittings, stainless steel hose clamps and 3/8" fiber-reinforced fuel line for additional strength and kink resistance. Faster priming fuel line assembly with 3/8" ID ensures maximum fuel flow to meet today's higher horsepower enginesKink resistant heavy duty fuel lineCompatible with ethanol blended fuelsBulb engineered to maintain flexibility and prevent collapse in hot and cold temperaturesSpring loaded check valves ensure for quicker primer in any position vertical or horizontalStainless Steel Clamps to ensure leak free connections
Seachoice 21381 Low Perm Fuel Line Kit - Yamaha, 3/8" X 6' - 21381 - 50-21381F1
Meets all EPA, CARB, USCG and ABYC Requirements Includes: Low permeation primer bulb, fuel line fittings, stainless steel hose clamps and 3/8" fiber-reinforced fuel line for additional strength and kink resistance. Fast priming high output primer bulbKink resistant heavy duty fuel lineCompatible with ethanol blended fuelsEngineered low permeation material prevents fuel evaporation, saving fuel and moneyBulb engineered to maintain flexibility and prevent collapse in hot and cold temperaturesIndustry leading vertical fuel draw for priming in any application
Seachoice 23061 90 Degree Stainless Steel Flush Mount Fuel Vent For 5/8" Hose - 50-23061 - 50-23061F1
On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage - or be damaged by hull bumps and scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system.
Seachoice 23701 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/8" X 25' - 315-0585 - 50-23701F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 23703 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/8" X 50' - 315-0586 - 50-23703F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 23704 Type A1 Fuel Tank And Feed Hose - 350 Series5/8" X 10' - 350-0583 - 50-23704F1
Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility-4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C).
Seachoice 23706 Type A1 Fuel Tank And Feed Hose - 350 Series5/8" X 25' - 350-0585 - 50-23706F1
Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility-4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C).
Seachoice 23707 Type A1 Fuel Tank And Feed Hose - 350 Series5/8" X 50' - 350-0586 - 50-23707F1
Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility-4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C).
Seachoice 23711 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 1-1/2" X 10' - 350-1123 - 50-23711F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23712 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series,1-1/2" X 12-1/2' - 350-1124 - 50-23712F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23713 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 1-1/2" X 25' - 350-1125 - 50-23713F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23714 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 1-1/2" X 50' - 350-1126 - 50-23714F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23715 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 2" X 10' - 350-2003 - 50-23715F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23716 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 2" X 12-1/2' - 350-2004 - 50-23716F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23724 Type A1-15 Low Permeation Fuel Hose - 360 Series, 1/4" X 25' - 360-0145 - 50-23724 Superseded By: 50-23744F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23726 Type A1-15 Low Permeation Fuel Hose - 360 Series, 1/4" X 50' - 360-0146 - 50-23726 Superseded By: 50-23746F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23727 Type A1-15 Low Permeation Fuel Hose - 360 Series, 5/16" X 25' - 360-0565 - 50-23727 Superseded By: 50-23747F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23728 Type A1-15 Low Permeation Fuel Hose - 360 Series, 5/16" X 50' - 360-0566 - 50-23728 Superseded By: 50-23748F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23730 Type A1-15 Low Permeation Fuel Hose - 360 Series, 3/8" X 250' - 360-0380 - 50-23730 Superseded By: 50-23750F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F? 180 F? (-29 C? to 82 C?).
Seachoice 23741 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/2" X 25' - 365-0125 - 50-23741F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23743 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/2" X 50' - 365-0126 - 50-23743F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23744 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/4" I.D., 25' Length - 365-0145 - 50-23744F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23746 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/4" X 50' Length - 365-0146 - 50-23746F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23747 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 5/16" X 25' Length - 365-0565 - 50-23747F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23748 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 5/16" X 50' Length - 365-0566 - 50-23748F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23749 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 25' - 365-0385 - 50-23749F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23750 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 250' - 365-0380 - 50-23750F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23751 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 50' - 365-0386 - 50-23751F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 25' White Poly Coiled Washdown Hose With Sprayer - 50-79691 - 50-79691F1
White poly hose is UV and chemical resistant and has brass hose fittings- perfect for marine, boat, RV, and garden usage.
Seachoice 28693 Propeller Hub Kit, Yamaha® Outboards & Stern Drives With V-4 & V-6 Gear Case © 1980 & Newer - 50-28693 - 50-28693F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and spacer
Seachoice 28694 Propeller Hub Kit,Honda® Outboards 75-90 Hp - 1999 & Newer, 115-130 Hp - 50-28694 - 50-28694F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28696 Propeller Hub Kit, Suzuki® 150-300 Hp 4-Stroke & 150-225 Hp 2-Stroke Outboards - 50-28696 - 50-28696F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28701 3-Blade Aluminum Propeller, 15" Pitch, 15-1/4" Dia., Rh Rotation - 50-28701 - 50-28701F1
Seachoice 28701 3-Blade Aluminum Propeller is an excellent performance and value in a replacement propeller for most stern drives and outboards (90hp - 350hp / 4.75" Gear case). Made with a special low-copper alloy for excellent toughness and corrosion resistance. Die-case contrucion allows for uniform blade positioning and durable powder coating contributes to a smoother, longer lasting product. Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28703 3-Blade Aluminum Propeller, 17" Pitch, 15" Dia., Rh Rotation - 28703 - 50-28703F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28705 3-Blade Aluminum Propeller, 19" Pitch, 14-1/2" Dia., Rh Rotation - 28705 - 50-28705F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28707 3-Blade Aluminum Propeller, 21" Pitch, 14-1/2" Dia., Rh Rotation - 28707 - 50-28707F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28711 3-Blade Aluminum Propeller, 13" Pitch, 14" Dia., Rh Rotation - 28711 - 50-28711F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28713 3-Blade Aluminum Propeller, 15" Pitch, 13-3/4" Dia., Rh Rotation - 28713 - 50-28713F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28715 3-Blade Aluminum Propeller, 17" Pitch, 13-1/4" Dia., Rh Rotation - 28715 - 50-28715F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28717 3-Blade Aluminum Propeller, 19" Pitch, 13" Dia., Rh Rotation - 28717 - 50-28717F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28721 4-Blade Aluminum Propeller, 14" Pitch, 14" Dia., Rh Rotation - 28721 - 50-28721F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28723 4-Blade Aluminum Propeller, 17" Pitch, 14" Dia., Rh Rotation - 28723 - 50-28723F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28725 4-Blade Aluminum Propeller, 19" Pitch, 14" Dia., Rh Rotation - 28725 - 50-28725F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60331 - 50-60331F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60341 - 50-60341F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60351 - 50-60351F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60361 - 50-60361F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60371 - 50-60371F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60441 - 50-60441F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60451 - 50-60451F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60461 - 50-60461F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60471 - 50-60471F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60481 - 50-60481F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61501 - 50-61501F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61511 - 50-61511F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61521 - 50-61521F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61531 - 50-61531F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61541 - 50-61541F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62601 - 50-62601F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62611 - 50-62611F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62621 - 50-62621F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/4" X 3" Assorted Colors (4 Per Pack) - 62221 - 50-62221F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/8" X 3", Assorted Colors (5 Per Pack) - 62191 - 50-62191F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant, Black With Assorted Sizes 1/8" To 1/2" X 3" (5 Per Pack) - 62201 - 50-62201F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Sizes
Seachoice 30 Degree Plastic Rod Holder With Injection Molded Abs Flange - White - 50-89251 - 50-89251F1
Molded high impact plastic. Etched finish on flange. One-piece construction. Non-corrosive. Uses (3) fasteners #12 for installation.
Seachoice 39121 Polypropylene 7" X 11" Id Pry-Out Type Hatch-White - 39121 - 50-39121F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39131 Polypropylene 7" X 11" Id Hatch With Molded In 100 Degree Stainless Steel Hinge - 39131 - 50-39131F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39141 Polypropylene 7" X 11" Id Hatch With Molded In 100 Degree Stainless Steel Hinge - 39141 - 50-39141F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39181 Polypropylene Offshore Hatch - 7-3/8 Inch X 11-1/8 Inch Id - White - 39181 - 50-39181F1
Low-profile design Low-profile designUV-stabilized, acetone-resistant polypropylene constructionHatch lid features interior gasketIntegrated hinge system allows 180° openingFlush handle for easy accessMax. weight capacity: 350 lbs.#8 Fasteners required
Seachoice 39201 Polypropylene Offshore Hatch - 10-3/8 Inch X 20-1/2 Inch Id - White - 39201 - 50-39201F1
Low-profile design Low-profile designUV-stabilized, acetone-resistant polypropylene constructionHatch lid features interior gasketIntegrated hinge system allows 180° openingFlush handle for easy accessMax. weight capacity: 350 lbs.#8 Fasteners required
Seachoice 40201 Hollow Braid Polypropylene Anchor Line, White, 1/4" X 50' - 40201 - 50-40201F1
Hollow-braided polypropylene. Rot proof. Great for small boats and mushroom anchors. Galvanized-steel snap hook. Hollow-braided polypropyleneWaterproof, resists rotLow resistance to sunlightGreat for small boats and mushroom anchorsGalvanized-steel snap hook
Seachoice 40211 Hollow-Braid Polypropylene Anchor Line, White, 3/8" X 75' - 50-40211 - 50-40211F1
Hollow-braided polypropylene. Rot proof. Great for small boats and mushroom anchors. Galvanized-steel snap hook. Hollow-braided polypropyleneWaterproof, resists rotLow resistance to sunlightGreat for small boats and mushroom anchorsGalvanized-steel snap hook
Seachoice 46361 62 Series Carbon Monoxide Detector, Flush Mount - 62-542-Wt - 50-46361 Superseded By: 270-62542Wtmarinetrf1
Space saving compact design for boats. Designed for the harsh marine environment. No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Alarm Mute button silences alarm while boat is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain. Memory Scan™ - Retains the CO level that activated the alarm. Micro Current Technology - Saves precious battery power in a boat. End of Life Signal alerts boater to replace the alarm after 5 years of service. Conforms to UL 2034 Marine Use and CSA 6.19-01.
Seachoice 5-Flat To 7-Round Coil Cord Adaptor - A57Ccsch - 50-51591F1
Converts tow vehicle 7-way round blade connector to 5-way flat pin connector.
Seachoice 50-20361 Fuel Filter & Gasket For Gold-Flo Electronic Fuel Pump Kit - 20361 - 50-20361F1
Fuel Filter And Gasket - Gold-Flo®74 Micron. Made in U.S.A.
Seachoice 51571 Led Thinline Sealed Stop/Turn/Tail Light - Stl69Rksch - 50-51571F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealedPolycarbonate lens and housingMeets SAE S2T2I6 for over 80" wide vehicles and has built-in reflex meeting SAE AHard wired with separate ground wire
Seachoice 52671 Led 3/4" Mini Sealed Marker/Clearance Kitamber - Mcl12Aksch - 50-52671F1
Fits any 3/4" openingSingle diodeDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSealed, waterproof constructionPolycarbonate lens and housingHard wired, with separate ground wireSize: .74" x .74" x .90"
Seachoice 52681 Led 3/4" Mini Sealed Marker/Clearance Kit Red - Mcl12Rksch - 50-52681F1
Fits any 3/4" openingSingle diodeDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSealed, waterproof constructionPolycarbonate lens and housingHard wired, with separate ground wireSize: .74" x .74" x .90"
Seachoice 52791 Led Fleet Count Sealed Waterproof Tail Light, 7 Function Passenger Side - Stl14Rssch - 50-52791F1
12-LED, Passenger Side. 7-Function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflexHard wired, with separate ground wire Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedUniversal MountWaterproofLow profileAcrylic lens, ABS plastic housing
Seachoice 52801 Led Fleet Count Sealed Waterproof Tail Light, 8 Function Driver Side - Stl15Rssch - 50-52801F1
18-LED, Driver Side.8-Function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflex, license illuminator.Hard wired, with separate ground wire Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedOver 80" Universal MountWaterproofLow profileAcrylic lens, ABS plastic housing
Seachoice 52831 Led 6" Oval Sealed Tail Light Kit For Flush Mount - Stl12Rksch - 50-52831F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSonically sealed, waterproofKit includes light, grommet and plug3-Function: Red stop/turn/tail lightWith A70GB grommet and A47PB pigtail, PL-3 connection.6.5" W x 2.25" H x 1.75" D
Seachoice 52841 Led 6" Oval Sealed Lights For Surface Mount - Stl78Rksch - 50-52841F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed. Mount in any 360 degree positionSonically sealed, waterproo fFlange surface mount-no panel cut-out required3-function: Red stop/turn/tail light7.563" W x 3.313" H x 0.750" D
Seachoice 52901 Led Sealed 3-Piece Identification Light Bar - Mcl97Rksch - 50-52901F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedDesigned for Over 80" Wide Trucks/TrailersWaterproof9 LED lightsSingle wireGrounds through mounting hardwareStainless steel base
Seachoice 52931 3-Function Sealed Oval Flush-Mount Tail Light - St70Rksch - 50-52931F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSonically sealed, waterproof3-Function: Stop, Tail, TurnPolycarbonate lens and housingInstallation hardware includedKit Includes: Light, Grommet, Plug (Pigtail)Size: 6.5" x 2.313" x 2.375"
Seachoice 60001 120 Piece Clear Seal Heat Shrink Terminal Kit - 60001 - 50-60001F1
18 Compartment box includes 120 pieces of clear heat shrink terminals including butt, ring and insulated disconnects.
Seachoice 60323 Clear Seal 22-18 Ga. 3-Way Splice, Red, 3/Bag - 50-60323 - 50-60323F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable three-way splice
Seachoice 60324 Clear Seal 16-14 Ga. 3-Way Splice, Blue, 3/Bag - 50-60324 - 50-60324F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable three-way splice
Seachoice 60326 Clear Seal 12-10 Ga. 3-Way Splice, Yellow, 3/Bag - 50-60326 - 50-60326F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable three-way spliceConnects three wires together99.9% Pure copper with brazed seam barrels, tin plated
Seachoice 60329 Clear Seal 16-14 Ga. Quick-Disconnect Multi-Stack Heat-Shrink Connector, 25/Bag - 50-60329 - 50-60329F1
Proprietary nylon/polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes, faster shrink times and improved abrasion resistance. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable multi-stack connector99.9% pure copper barrel, tin plated
Seachoice 62031 Heat Shrink Tubing W/Sealant 1/8" X 3" Black 3/Pack - 62031 - 50-62031F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62041 Heat Shrink Tubing W/Sealant 3/16" X 3" Black 3/Pack - 62041 - 50-62041F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62051 Heat Shrink Tubing W/Sealant 1/4" X 3" Black 3/Pack - 62051 - 50-62051F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62071 3-To-1 Heat Shrink Tubing With Sealant - 62071 - 50-62071F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62101 Heat Shrink Tubing W/Sealant 1/8" X 3" Red 3/Pack - 50-62101 - 50-62101F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62111 Heat Shrink Tubing W/Sealant 3/16" X 3" Red 3/Pack - 50-62111 - 50-62111F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62121 Heat Shrink Tubing W/Sealant 1/4" X 3" Red 3/Pack - 50-62121 - 50-62121F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62131 3-To-1 Heat Shrink Tubing With Sealant - 50-62131 - 50-62131F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62141 3-To-1 Heat Shrink Tubing With Sealant - 50-62141 - 50-62141F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62211 3-To-1 Heat Shrink Tubing With Sealant - 62211 - 50-62211F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62641 Heat Shrink Tubing W/Sealant 1/2" X 1-1/2" Black 2/Pack - 62641 - 50-62641F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62651 Heat Shrink Tubing W/Sealant 3/4" X 1-1/2" Black 2/Pack - 62651 - 50-62651F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62661 Heat Shrink Tubing W/Sealant 1" X 1-1/2" Black 2/Pack - 62661 - 50-62661F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62671 Heat Shrink Tubing W/Sealant 1/2" X 1-1/2" Red 2/Pack - 62671 - 50-62671F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62681 Heat Shrink Tubing W/Sealant 3/4" X 1-1/2" Red 2/Pack - 62681 - 50-62681F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 62691 Heat Shrink Tubing W/Sealant 1" X 1-1/2" Red 2/Pack - 62691 - 50-62691F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 85343 Ski Vest - 4 Belt Blue, S/M - 85343 - 50-85343F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85353 Ski Vest - 4 Belt Blue, L/Xl - 85353 - 50-85353F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85363 Ski Vest - 4 Belt Blue, 2Xl/3Xl - 85363 - 50-85363F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85383 Ski Vest - 4 Beltred, S/M - 85383 - 50-85383F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85393 Ski Vest - 4 Beltred, L/Xl - 50-85393 - 50-85393F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85403 Ski Vest - 4 Belt Red, 2Xl/3Xl - 85403 - 50-85403F1
Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for skiing, wakeboarding, boating, fishing or cruising.Certified / Approved: USCG/TC ApprovedFlotation Material: EPE foamShell: PolyesterClosure: Four nylon straps w/ buckle
Seachoice 85490 Type V Inflatable Waist Belt, Black - Wb24-85490 - 50-85490F1
The Seachoice Inflatable Waist Belt provides on-demand inflation protection in a low-profile design. It is super comfortable and lightweight with adjustable waist strap. The 24g CO2 cylinder is manually activated with the bright red pull handle, and a backup inflation tube is included.Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Convertible personal flotation device24g CO2 cylinder for Halkey Roberts 840 inflatorMANUAL activation with a back up Oral Inflation TubeComfortable and lightweightIdeal for recreational boating, fishing and other non-watersport activitiesU.S. Coast Guard approved
Seachoice 88731 Prop Buddy 4" For Minn Kota Trolling Motor To Prevent Weed Build Up On Propeller - 50-88731 - 50-88731F1
Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propeller. Stainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable.Fits all Minn Kota® trolling motors with MKP-8 Weedless Wedge, MKP-24 Weedless Wedge and MKP-33 Weedless Wedge 2 propellers. Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propellerFits all Minn Kota trolling motors with MKP-8 Weedless Wedge, MKP-24 Weedless Wedge and MKP-33 Weedless Wedge 2 propellersStainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable
Seachoice 88736 Replacement Blade Set For 4" Prop Buddy (Seachoice #88731) - 50-88736 - 50-88736F1
The replacement blade set for 4" Prop Buddy contains 2 blade sets. The 4-P style blade set is compatible the following Minn Kota® propellers: MKP-24 Weedless Wedge, found on these motors: Maxxum 101; Riptide 101; Vantage 101; Vector 3X 101 MKP-8 Weedless Wedge, found on these motors: AutoPilot 64; Maxxum 74, 76; Maxxum Transom 74; PowerDrive 64, 74; Vantage 74; Vector 3X 743HPa, 4HPA, 3.1HP/S, 3.1HP/B, 4.3HP/S, 4.3HP/B, RT3.1/S, RT3.1/B, RT4.3/S, RT4.3/B, RT74/B The 4-S style blade set is compatible with the following Minn Kota propeller: MKP-33 Weedless Wedge 2, found on these motors: Engine Mount 80, 101, 160, & 202; EO 1/2 HP; Fortrex 80, 101; Maxxum 80, 101; Maxxum Pro 80, 101; Maxxum Transom 80, 101; PowerDrive 80; PowerDrive V2 80; Riptide 80, 101; Riptide Pro 80, 101; Riptide Fortrex 80, 101; Riptide Maxxum 80, 101; Riptide Terrova 80, 101; Terrova 80, 101; Ulterra 80; Riptide Ulterra 80; Ultrex 80; Traxxis 80, 101; Vantage 80, 101; Vector 3X 80, 101; all Trim-N-Troll Kits
Seachoice 88741 Prop Buddy 4.5" For Minn Kota Trolling Motor To Prevent Weed Build Up On Propeller - 50-88741 - 50-88741F1
Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propeller. Stainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable. Fits all Minn Kota® trolling motors with MKP-38 Weedless Wedge 2 propeller. Prop Buddy is an innovative, dual-bladed collar that chops weeds before they build-up on the propellerFits all Minn Kota® trolling motors with MKP-38 Weedless Wedge 2 propeller.Stainless-steel hose clamp and hardware included; no sanding or adhesives required. Blades are replaceable
Seachoice 88746 Replacement Blade Set For 4.5" Prop Buddy (Seachoice #88741) - 50-88746 - 50-88746F1
The replacement blade set for 4.5" Prop Buddy contains 1 blade set, compatible with the following Minn Kota propeller: MKP-38 Weedless Wedge 2, found on these motors: EO 1 HP; Fortrex 112; Terrova 112; Ulterra 112; Riptide Ulterra 112; Ultrex 112; Riptide Terrova 112; Riptide Fortrex 112; Riptide 112
Seachoice 91986 Wet/Dry Silicone Carbide Paper, Grade: 1000 - 91986 - 50-91986F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91987 Wet/Dry Silicone Carbide Paper, Grade: 1200 - 91987 - 50-91987F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91988 Wet/Dry Silicone Carbide Paper, Grade: 1500 - 91988 - 50-91988F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91989 Wet/Dry Silicone Carbide Paper, Grade: 2000 - 91989 - 50-91989F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 96881 Elastomeric White Marine Sealant, 3 Oz. - 50-96881 - 50-96881F1
For use below or above waterline Fast curing and permanently flexible: full cure in 1 to 7 days at 40°F to 130°FNon staining or saggingAdheres tenaciously to fiberglass, wood, metal, glass, plexiglass, Lexan and other plasticsSandable and paintableClean-up with mineral spiritsNot recommended for deck seams or areas in contact with gasoline Not available for sale in California.
Seachoice 96901 Elastomeric White Marine Sealant, 10 Oz. - 50-96901 - 50-96901F1
For use below or above waterline Fast curing and permanently flexible: full cure in 1 to 7 days at 40°F to 130°FNon staining or saggingAdheres tenaciously to fiberglass, wood, metal, glass, plexiglass, Lexan and other plasticsSandable and paintableClean-up with mineral spiritsNot recommended for deck seams or areas in contact with gasoline Not available for sale in California.
Seachoice Black Poly Carb Deck Plate Key For 1-1/4" And 1-1/2" Deck Plates - 50-32651 - 50-32651F1
Black poly carb. Will fit 1-1/4" and 1-1/2" deck plates. Overall length: 3-3/8".
Seachoice Boat Fuel Gauge Kit, Includes Gauge And In-Tank Equipment - 50-15501 - 50-15501F1
This Seachoice Fuel Gauge Kit has everything you need to equip a boat with a fuel gauge and the in-tank equipment that will monitor fuel levels. This versatile kit can be used for gas or diesel. Made of non-ferrous materials, the tank equipment can be used with tanks ranging in depth from 6 inches to 27 inches. The mounting screws and gasket are included for sure installation, and the float arm can be rotated in 90° intervals to ensure that there's clearance with tank walls or baffles. The low-profile Fuel Gauge for 12V negative ground systems has a black bezel and a light kit so the fuel level is always visible. Not for dual station applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Can be used with petrol or dieselCombination of references 15421 and 15441Seachoice
Seachoice Brass Three Way Fuel Line Valve - 50-20751 - 50-20751F1
Female ports BrassPositive lock with audible click
Seachoice Brass Three Way Fuel Line Valve - 50-20761 - 50-20761F1
Female ports BrassPositive lock with audible click NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Brass Two Way Fuel Line Valve - 50-20721 - 50-20721F1
Brass Two Way Fuel Line Valve, 1/4 x 1/4 Male/Female
Seachoice Brass Two Way Fuel Line Valve - 50-20731 - 50-20731F1
Brass Two Way Fuel Line Valve, 1/4 x 1/4 Female/Female
Seachoice Brass Two Way Fuel Line Valve - 50-20741 - 50-20741F1
Brass Two Way Fuel Line Valve, 3/8 x 3/8 Female/Female NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Coupler Repair Kit - 52471 - 50-52471F1
Steel construction. Fits a 1-7/8" trailer ball and can fit most brands of 2", 2-1/2" or 3" channel couplers.
Seachoice Coupler Repair Kit - 52481 - 50-52481F1
Steel construction. Fits a 1-7/8" trailer ball and can fit most brands of 2", 2-1/2" or 3" channel couplers.
Seachoice Cube Electronic Fuel Pump, 3-4.5 Psi, 12 Volt Systems - 20341 - 50-20341F1
This Seachoice Cube® Electronic Fuel Pump Kit features premium construction and engineering to ensure it provides the surest fuel delivery possible. This versatile Fuel Pump is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. This Fuel Pump features a reliable, solid-state design for a longer service life. It is self-regulating and self-priming, and it has an internal check valve. It also has a built-in anti-siphon valve, transient protection, and a 74-micron filter to prevent impurities from passing through the fuel system. Designed for 12 volt systems only, this Fuel Pump installs easily. It is Coast Guard ignition test approved, and UL (574A) Certified. It is rated for 60 inches lift, 4.5-3.0 psi, and 30 gph. This OEM #40288 Fuel Pump has a 1/8 inch x 27 thread. Not intended for aircraft use. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesSelf-regulating and self-priming, has an internal check valve, built-in anti-siphon valve, transient protectionRated for 60 inches lift, 4.5-3.0 psi, and 30 gph, and has a 74-micron filterHas a 1/8 inch x 27 threadDesigned for 12 volt systems only, installs easily, is Coast Guard ignition test approved and UL (574A) CertifiedNot intended for aircraft useInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Seachoice Cube Electronic Fuel Pump, 3.5-5 Psi, 12 Volt Systems - 20311 - 50-20311F1
This Seachoice Cube® Electronic Fuel Pump Kit features premium construction and engineering to ensure it provides the surest fuel delivery possible. This versatile Fuel Pump is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. This Fuel Pump features a reliable, solid-state design for a longer service life. It is self-regulating and self-priming, and it has an internal check valve. It also has a built-in anti-siphon valve, transient protection, and a 74-micron filter to prevent impurities from passing through the fuel system. Designed for 12 volt systems only, this Fuel Pump installs easily. It is Coast Guard ignition test approved, and UL (574A) Certified. It is rated for 60 inches lift, 5.0-3.5 psi, and 19 gph. This OEM #40176 Fuel Pump has a 1/8 inch x 27 thread. Not intended for aircraft use. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesSelf-regulating and self-priming, has an internal check valve, built-in anti-siphon valve, transient protectionRated for 60 inches lift, 5.0-3.5 psi, and 19 gph, and has a 74-micron filterHas a 1/8 inch x 27 threadDesigned for 12 volt systems only, installs easily, is Coast Guard ignition test approved and UL (574A) CertifiedNot intended for aircraft useInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Seachoice Cube Electronic Fuel Pump, 9-11.5 Psi, 12 Volt Systems - 20321 - 50-20321F1
This Seachoice Cube® Electronic Fuel Pump Kit features premium construction and engineering to ensure it provides the surest fuel delivery possible. This versatile Fuel Pump is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. This Fuel Pump features a reliable, solid-state design for a longer service life. It is self-regulating and self-priming, and it has an internal check valve. It also has a built-in anti-siphon valve, transient protection, and a 74-micron filter to prevent impurities from passing through the fuel system. Designed for 12 volt systems only, this Fuel Pump installs easily. It is Coast Guard ignition test approved, and UL (574A) Certified. It is rated for 96 inches lift, 11.5-9.0 psi, and 32 gph. This OEM #40185 Fuel Pump has a 1/8 inch x 27 thread. Not intended for aircraft use. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesSelf-regulating and self-priming, has an internal check valve, built-in anti-siphon valve, transient protectionRated for 96 inches lift, 11.5-9.0 psi, and 32 gph, and has a 74-micron filterHas a 1/8 inch x 27 threadDesigned for 12 volt systems only, installs easily, is Coast Guard ignition test approved and UL (574A) CertifiedNot intended for aircraft useInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Seachoice Deluxe 4-Belt Ski Vest - Yellow/Black, Lg/Xl - - 50-86420F1
U.S.C.G. Approved. Transport Canada Approved.This dual sized vest is great for skiing, boating, fishing or relaxing on the water. Lightweight, durable foam contours to your body and doesn't hinder mobility. Adjustable belts and chest strap to keep vest from riding up or shifting. Made in the USA. Type: Level 70 Flotation Material: EPE foam Shell: 200 Denier oxford fabric Closure: 1-1/2" Nylon
Seachoice Deluxe 4-Belt Ski Vest - Yellow/Black, Sm/Md - - 50-86410F1
U.S.C.G. Approved. Transport Canada Approved.This dual sized vest is great for skiing, boating, fishing or relaxing on the water. Lightweight, durable foam contours to your body and doesn't hinder mobility. Adjustable belts and chest strap to keep vest from riding up or shifting. Made in the USA. Type: Level 70 Flotation Material: EPE foam Shell: 200 Denier oxford fabric Closure: 1-1/2" Nylon
Seachoice Deluxe 4-Belt Ski Vest - Yellow/Black, Xxl/Xxxl - - 50-86430F1
U.S.C.G. Approved. Transport Canada Approved.This dual sized vest is great for skiing, boating, fishing or relaxing on the water. Lightweight, durable foam contours to your body and doesn't hinder mobility. Adjustable belts and chest strap to keep vest from riding up or shifting. Made in the USA. Type: Level 70 Flotation Material: EPE foam Shell: 200 Denier oxford fabric Closure: 1-1/2" Nylon
Seachoice Deluxe Fuel Connector For Chrysler/Force, Chrome Plated Brass - Female Hose Fitting 3/8" Barb - 20701 - 50-20701F1
No rust SS ball bearings; Chrome plated brass
Seachoice Deluxe Fuel Connector For Chrysler/Force, Chrome Plated Brass - Male Tank Fitting 1/4" Npt - 20691 - 50-20691F1
No rust SS ball bearing; Chrome plated brass
Seachoice Deluxe Fuel Connector For Honda, Brass - Female Hose Fitting 3/8" Barb - 20461 - 50-20461F1
No rust SS ball bearing; Chrome plated brass
Seachoice Deluxe Fuel Connector For Honda, Chrome Plated Brass - Male Tank Fitting 1/4" Npt - 20481 - 50-20481F1
No rust SS ball bearing; Chrome plated brass
Seachoice Deluxe Fuel Connector For Honda, Female, 3/8 In. Barb - 20441 - 50-20441F1
Featuring durable, hi-impact nylon construction, Seachoice deluxe fuel connectors are suitable for marine environments. Ensure low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. This is a female 3/8-inch barb type connector compatible with Honda fuel lines. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Precision engineered fuel connectorHi-impact nylon constructionFemale 3/8-inch barb type connectorRectangular locking postFits Honda
Seachoice Deluxe Fuel Connector For Mercury, Acetal - Female Hose Fitting 3/8" Barb - - 50-20601F1
Acetal body for dimension stability
Seachoice Deluxe Fuel Connector For Mercury, Acetal - Female Tank Fitting 3/8" Barb - 50-20531 - 50-20531F1
Acetal body with SS ball bearing and thumb lever
Seachoice Deluxe Fuel Connector For Mercury, Female, 1/4 In. Npt - 20561 - 50-20561F1
Featuring durable, hi-impact nylon construction, Seachoice deluxe fuel connectors are suitable for marine environments. Ensure low-restriction of fuel flow to your engine. This is a female 1/4-inch NPT thread type connector compatible with Mercury/Mariner fuel lines. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Precision engineered fuel connectorHi-impact nylon constructionFemale 1/4-inch NPT thread type connectorFits Honda, Mercury/Mariner, OMC (J/E), and YamahaManufacturer part number 50-20561
Seachoice Deluxe Fuel Connector For Omc (Evinrude/Johnson), Male, 1/4 In. Npt - 20511 - 50-20511F1
Featuring corrosion-resistant brass construction, Seachoice deluxe fuel connectors are suitable for marine environments. Ensure low-restriction of fuel flow to your engine. This is a male 1/4-inch NPT thread type connector compatible with OMC (Evinrude/Johnson) fuel lines. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Precision engineered fuel connectorCorrosion-resistant brass constructionMale 1/4-inch NPT thread type connectorFits OMC (Evinrude/Johnson)Manufacturer part number 50-20511
Seachoice Deluxe Fuel Connector Hose Fitting For Evinrude/Johnson, Female, 3/8 In. Barb - 20551 - 50-20551F1
Durable, UV resistant and designed for the marine environment, this deluxe fuel connector tank fitting is compatible with most Yamaha/Mercury/Mariner factory fuel lines. Ensures low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. High impact nylon construction features 3/8 inch barb. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Deluxe female fuel connector fitting provides a leak-free connection between fuel line and tankCompatible with most Yamaha/Mercury/Mariner factory fuel linesConnection: 3/8 inch hose barbHigh impact nylon constructionConnection: 3/8 inch hose barbManufacturer part number 50-20551
Seachoice Deluxe Fuel Connector Hose Fitting For Evinrude/Johnson, Female, 5/16 In. Barb - 20521 - 50-20521F1
Durable, UV resistant and designed for the marine environment, this deluxe fuel connector tank fitting is compatible with most Evinrude/Johnson factory fuel lines. Ensures low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. High impact nylon construction features 5/16 inch barb. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Deluxe female fuel connector provides a leak-free connection between fuel line and tankCompatible with most Evinrude/Johnson factory fuel linesConnection: 5/16 inch hose barbHigh impact nylon constructionConnection: 5/16 inch hose barbManufacturer part number 50-20521
Seachoice Deluxe Fuel Connector Hose Fitting For Yamaha/Mercury, Female, 3/8 In. Barb - 20661 - 50-20661F1
Durable, UV resistant and designed for the marine environment, this deluxe fuel connector tank fitting is compatible with most Yamaha/Mercury/Mariner factory fuel lines. Ensures low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. High impact nylon construction features 3/8 inch barb. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Deluxe female fuel connector fitting: Provides a leak-free connection between fuel line and tankCompatibility: Works with most Yamaha/Mercury/Mariner factory fuel linesConnection: Features 3/8 inch hose barbConstruction: Made of high impact nylonMarine-grade: Designed for the marine environment, UV resistantSeachoice part number 50-20661
Seachoice Deluxe Fuel Connector Hose Fitting For Yamaha/Mercury, Female, 5/16 In. Barb - 20621 - 50-20621F1
Durable, UV resistant and designed for the marine environment, this deluxe fuel connector tank fitting is compatible with most Yamaha/Mercury/Mariner factory fuel lines. Ensures low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. High impact nylon construction features 5/16 inch barb. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Deluxe female fuel connector fitting provides a leak-free connection between fuel line and tankCompatible with most Yamaha/Mercury/Mariner factory fuel linesConnection: 5/16 inch hose barbHigh impact nylon constructionConnection: 5/16 inch hose barbManufacturer part number 50-20621
Seachoice Deluxe Fuel Connector Tank Fitting For Yamaha/ Mercury, Male, 1/4 In. Npt - 20651 - 50-20651F1
Designed specifically for fuel fitting applications, this male hose barb fits 5/16 inch hose and features 1/4 inch NPT thread. Brass machined fitting ensures lasting durability. Not for use with potable water systems. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Deluxe male fuel connector fitting provides a leak-free connection between fuel line and tankCompatible with most Yamaha/Mercury/Mariner factory fuel linesConnection: ¼ inch NPTDurable brass constructionConnection: ¼ inch NPT
Seachoice Deluxe Type Iii 4-Belt, Blue, 4Xl/5Xl - 50-85370 - 50-85370F1
Stylish performance water sports vest with features that set it apart. Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for Skiing, wakeboarding, boating, fishing or cruising. Coast Guard Type: USCG Type llIFlotation Material: Lightweight foamShell: 200 Denier oxford fabricClosure: 2" Nylon and D-ring
Seachoice Deluxe Type Iii 4-Belt, Red, 4Xl/5Xl - 50-85410 - 50-85410F1
Stylish performance water sports vest with features that set it apart. Increased durability and soft foam allows for maximum mobility. This dual sized vest is perfect for Skiing, wakeboarding, boating, fishing or cruising. Coast Guard Type: USCG Type llIFlotation Material: Lightweight foamShell: 200 Denier oxford fabricClosure: 2" Nylon and D-ring
Seachoice Dura-Lift Electronic Fuel Pump, Solid State Construction, 120 In. Lift, 11.5-9 Psi, 33 Gph - 20331 - 50-20331F1
This Seachoice Dura-Lift® Electronic Fuel Pump features premium components and solid-state construction to ensure it provides the most reliable fuel delivery possible. It offers tremendous versatility as it is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. Plus, this 12-volt Fuel Pump can be used on: marine generator sets, refrigeration trucks, diesel filtration systems, industrial applications, and other diesel lift applications. It is rated for 120 inches lift, 11.5-9 psi, and 33 gph. This OEM # FACET 40222 Fuel Pump has a 1/8 inch x 27 thread. This Fuel Pump is self-regulating and has an internal check valve. It also has a 4-hour dry run, voltage spike protection, and an 80-micron Stainless Steel filter to prevent impurities from passing through the fuel system. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium solid-state construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesDependable Fuel Pump is self-regulating, has an internal check valve, a 4-hour dry run, and voltage spike protectionRated for 120 inches lift, 11.5-9.0 psi, and 33 gphHas a 1/8 inch x 27 threadReliable 80-micron Stainless Steel filter prevents impurities from passing through fuel systemVersatile Fuel Pump can be used on: marine generator sets, refrigeration trucks, diesel filtration systems, industrial applications and other diesel lift applications
Seachoice Fuel Connector For Mercury (1998 And Newer), Male, 1/4 In. Npt - 20591 - 50-20591F1
Featuring durable, hi-impact nylon construction, Seachoice deluxe fuel connectors are suitable for marine environments. Ensure low-restriction of fuel flow to your engine. This is a male 1/4-inch NPT thread type connector compatible with Mercury/Mariner (1998 and newer) fuel lines. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Precision engineered fuel connectorHi-impact nylon constructionMale 3/8-inch barb type connectorFits Mercury/Mariner (1998 and newer)Manufacturer part number 50-20591
Seachoice Fuel Connector For Mercury, Acetal - Female Hose Fitting 3/8" Barb - 20571 - 50-20571 Superseded By: 50-20661F1
Acetal body with SS ball bearing and thumb lever
Seachoice Fuel Connector For Yamaha, Mercury/Female, 3/8 In. Barb - 20671 - 50-20671 Superseded By: 50-20661F1
Featuring durable, hi-impact nylon construction, Seachoice deluxe fuel connectors are suitable for marine environments. Ensure low-restriction of fuel flow to your engine. This is a female 3/8-inch barb type connector compatible with Yamaha and Mercury/Mariner fuel lines. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Easy-to-use quick connects for faster installationHi-impact nylon constructionFemale 3/8-inch barb type connectorFits Yamaha, Mercury/Mariner
Seachoice Fuel Connector Hose For Evinrude/Johnson, Female, 3/8 In. Barb - 20541 - 50-20541 Superseded By: 50-20551F1
Durable, UV resistant and designed for the marine environment, this fuel connector tank fitting is compatible with most Yamaha/Mercury/Mariner factory fuel lines. Ensures low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. High impact nylon construction features 3/8 inch barb. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Female fuel connector fitting provides a leak-free connection between fuel line and tankCompatible with most factory Evinrude/Johnson fuel linesConnection: 3/8 inch female hose barbHigh impact nylon constructionConnection: 3/8 inch hose barbManufacturer part number 50-20541
Seachoice Fuel Connector Tank Fitting For Yamaha/ Mercury, Male, 1/4 In. Npt - 20641 - 50-20641F1
Providing a perfect fit for a single group 27 battery, this black battery tray with stainless steel hold down rods, nuts and washers meets U.S. Coast Guard regulations for keeping batteries in place. Ideal for applications that do not require batteries to be completely encased. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Male fuel connector fitting provides a leak-free connection between fuel line and tankCompatible with most factory fuel linesConnection: 3/8 inch male hose barbBrass constructionThread: ¼ inch NPTManufacturer part number 50-20641
Seachoice Fuel Connector Tank For Evinrude/Johnson, Male, 1/4 In. Npt - 20501 - 50-20501F1
Durable, UV resistant and designed for the marine environment, this deluxe fuel connector tank fitting is compatible with most Evinrude/Johnson factory fuel lines. Ensures low-restriction of fuel flow to your engine and eliminates the dangers of a leaky fuel connection. Durable brass construction features ¼ inch NPT thread. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Male fuel connector provides a leak-free connection between fuel line and tankCompatible with most Evinrude/Johnson factory fuel linesConnection: ¼ inch NPTDurable brass constructionProtective clear package for easy visibility and applicationManufacturer part number 50-20501
Seachoice Fuel Electric Sending Unit Boat Kit, 6-12 In. Tank - 50-15461 - 50-15461F1
Providing an accurate reading of the amount of gas or diesel in a fuel tank by linking to a dash-mounted gauge, this electronic sending unit features a swing arm float design that can be rotated in 90 degree intervals to ensure clearance of tank walls or baffles. Made of non-ferrous materials and compatible with 35 to 240 ohm gauges. Mounting screws and gasket included. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Provides accurate fuel level informationSuitable Tank Depth: 6 to 12 inchesCan be used for gas or dieselCompatible with 35 to 240 ohm gaugesIncludes mounting screws and gasketManufacturer part number 50-15461
Seachoice Fuel Electric Sending Unit Boat Kit, 6-24 In. Tank - 50-15471 - 50-15471F1
Providing an accurate reading of the amount of gas or diesel in a fuel tank by linking to a dash-mounted gauge, this electronic sending unit features a swing arm float design that can be rotated in 90 degree intervals to ensure clearance of tank walls or baffles. Made of non-ferrous materials and compatible with 35 to 240 ohm gauges. Mounting screws and gasket included. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Electric sending unit provides accurate fuel level informationSuitable Tank Depth: 4 to 24 inchesCan be used for gas or dieselCompatible with 35 to 240 ohm gaugesIncludes mounting screws and gasketManufacturer part number 50-15471
Seachoice Fuel Electric Sending Unit Boat Kit, 6-27 In. Tank - 15421 - 50-15421F1
Providing an accurate reading of the amount of gas or diesel in a fuel tank by linking to a dash-mounted gauge, this electronic sending unit features a swing arm float design that can be rotated in 90 degree intervals to ensure clearance of tank walls or baffles. Made of non-ferrous materials and compatible with 35 to 240 ohm gauges. Mounting screws and gasket included. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Provides accurate fuel level informationSuitable Tank Depth: 6 to 27 inchCompatible with 35 to 240 ohm gaugesCan be used for gas or dieselIncludes mounting screws and gasketManufacturer part number 50-15421
Seachoice Fuel Filter Kit W/Plastic Bowl - 21431 - 50-21431 Superseded By: 50-22301F1
Aluminum Bracket with brass 3/8" brass fittings.
Seachoice Fuel Filters, Mercury Verado & Optimax Outboards, Pair - 20981 - 50-20981F1
Seachoice Optimax/Verado Outboard Replacement Filter Cartridges are a quality replacement for your old or worn filters. Includes 2 screw-in type 2 micron filter cartridges. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Quality replacement filters for Optimax/Verado outboardsFits Mercury 35-8MM0060041, 8M0020349, 884380T, Sierra 7981, Parker 31871, and Marpac FF020100 filters2 Micron filter mediaScrew-in cartridge typeSold in pairs
