Select Category
Engine & Fuel
Scanstrut Ds6Pblk Entry Cable Seal, Vertical Entry - Ds6-P-Blk - 922-Ds6Pblkf1
For cables from 2-6mm (0.08"-0.24"), an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly. Watertight InstallationTapered bung forms a watertight seal. all units are supplied with a closed-cell base seal - 100% waterproof. All models have been IP68 tested and approved. Easy and Reliable InstallationCaptive nuts make for easy assembly and also allow reliable repeat installations. Each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible. Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant design (no sharp edges to hit your foot on!) and outer dome provides additional water shield. Easy fit cable routing that cuts down your installation timeA guaranteed 100% watertight sealDesigned for a range of cable diametersPerfect for solar panels, light bars, lights and other rooftop electronicsThe low-profile construction is impact resistant and provides extra protection from waterCaptive nuts make for easy assembly and also allow for reliable repeat installationsOur materials have been selected to be UV- stable and hard-wearingNo messy sealant on bungs
Scanstrut Dsh10 Plastic Multi Cable Deck Seal, Grey - Ds-H10 - 922-Dsh10F1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsh10Blk Plastic Multi Cable Deck Seal, Black - Ds-H10-Blk - 922-Dsh10Blkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsh6 Plastic Multi Cable Deck Seal, Grey - Ds-H6 - 922-Dsh6F1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsh6Blk Entry Cable Seal, Horizontal Entry - Ds-H6-Blk - 922-Dsh6Blkf1
For cables from 2-6mm (0.08"-0.24"), an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly. Easy fit cable routing that cuts down your installation timeA guaranteed 100% watertight sealDesigned for a range of cable diametersPerfect for solar panels, light bars, lights and other rooftop electronicsThe low-profile construction is impact resistant and provides extra protection from waterCaptive nuts make for easy assembly and also allow for reliable repeat installationsOur materials have been selected to be UV- stable and hard-wearingNo messy sealant on bungs
Scanstrut Dshd10Blk Plastic Double Cable Deck Seal, Black - Ds-Hd10-Blk - 922-Dshd10Blkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dshd6Blk Plastic Double Cable Deck Seal, Black - Ds-Hd6-Blk - 922-Dshd6Blkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsmulti Aluminum Multi Cable Deck Seal, Grey - Ds-Multi - 922-Dsmultif1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Dsmultipblk Plastic Multi Cable Deck Seal, Black - Ds-Multi-P-Blk - 922-Dsmultipblkf1
The only guaranteed and proven watertight installation for your antenna and nav light cables. A low profile shape makes for a stronger, impact resistant seal; no sharp edges to hit your foot on. Each deck seal supplied with blank and pre-drilled inner seals to suit your requirements. Split seal eliminates need to remove cable connectors during installation.
Scanstrut Sccw10Gt Cove Led Wireless 15W 3-Coil Charger,12/24V - Sc-Cw-10Gt - 922-Sccw10Gtf1
The pioneering three-coil Cove charger is designed to revolutionize your charging experience. Cove is perfect for integration into consoles, seating, cabinetry, and more! Simply slide your phone into the pocket and instantly start wirelessly charging. IPX6 WaterproofQi compatibleStore and ChargeInput Voltage Range: 10-30V DC (12/24V system)Three overlapping charging coils maximize performanceNo alignment is needed, throw your phone into the charger and your phone will always charge!Uninterrupted charging during outdoor adventuresRear installation light, for testing power & correct wiring
Scanstrut Sccw1Gt Hidden Wireless 15W 3-Coil Charger, 12/24V - Sc-Cw-1Gt - 922-Sccw1Gtf1
Engineered to be installed under the surface, leaving the top surface uncluttered. The pioneering three-coil hidden charger is designed to revolutionize your charging experience. Mounted underneath your selected surface, Hidden 3 Coil gives a sleek and ultra-clean aesthetic. With the option of having a rubber grip to showcase location or to go ultra-minimal, you could etch a marker or logo to showcase placement for your phone. The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location. Additionally, the built-in heat management system adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.
Scanstrut Sccw2Gt Surface Wireless 15W 3-Coil Charger - Sc-Cw-2Gt - 922-Sccw2Gtf1
The pioneering 15W 3 coil surface charger is designed to revolutionize your charging experience. This waterproof and wireless charger can be fitted to any smooth surface, indoors or outdoors.Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone, to ensure a constant charge, no matter the adventure or the placement of the phone on the charger. No sealant is required! Simply route out the required shape with our handy template and use the 3M tape on the underside of the charger to adhere to your surface. LED lights for fast visual of charging status.
Scanstrut Sccw7Gt Sub Wireless 15W 3-Coil Charger, 12/24V - Sc-Cw-7Gt - 922-Sccw7Gtf1
The pioneering three-coil sub-charger is designed to revolutionize your charging experience. Sunk into any surface with foam overlay on top or installed on top of the surface, the sub offers unparalleled ease of use whilst keeping your aesthetics looking flush and clean. The built-in heat management system also adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go. IPX6 WaterproofQi compatibleInput Voltage Range: 10-30V DC (12/24V system)Three overlapping charging coils maximize performanceTop install or flush installation optionsNo alignment is needed, throw your phone on the charger and your phone will always charge!Uninterrupted charging during outdoor adventuresSimple one-cut installation
Scanstrut Sccw9Gt Cove Wireless 15W 3-Coil Charger,12/24V - Sc-Cw-9Gt - 922-Sccw9Gtf1
The pioneering three-coil Cove charger is designed to revolutionize your charging experience. Cove is perfect for integration into consoles, seating, cabinetry, and more! Simply slide your phone into the pocket and instantly start wirelessly charging. IPX6 WaterproofQi compatibleStore and ChargeInput Voltage Range: 10-30V DC (12/24V system)Three overlapping charging coils maximize performanceNo alignment is needed, throw your phone into the charger and your phone will always charge!Uninterrupted charging during outdoor adventuresRear installation light, for testing power & correct wiring
Scepter 04068 Fuel Fitting-Tank Brp Male - 4068 - 770-04068F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 04075 Fuel Tank Fitting, Yamaha Brass Male - 4075 - 770-04075F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05787 Fuel Fitting-Brp Female - 5787 - 770-05787F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05791 Fuel Fitting-Mercury Eng Clip - 5791 - 770-05791F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05793 Fuel Fitting-Mercury Tank Clip - 5793 - 770-05793F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05813 Fuel Tank/Engine Fitting, Yamaha Brass Female - 5813 - 770-05813F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05815 Fuel Tank/Engine Fitting, Yamaha Brass Female - 5815 - 770-05815F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05822 Fuel Fitting-Brp Female - 5822 - 770-05822F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05827 Fuel Fitting-Honda Tank Female - 5827 - 770-05827F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Scepter 05837 Fuel Fitting-Tank Mercury Clip Type - 5837 - 770-05837F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 05869 3/8" Primer Bulb - 5869 - 770-05869F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 07482 Fuel Line Assembly, Mercury, ('98 & Newer) - 7482 - 770-07482F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07483 Fuel Line Assembly, Mercury Cast/Aluminum Bayonet Style - 7483 - 770-07483F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07485 Fuel Line Assembly, Universal - 3/8" Id X 80" L - 7485 - 770-07485F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07486 Fuel Line Assembly, Johnson/Evinrude - 7486 - 770-07486F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07489 Fuel Line Assembly, Yamaha - 7489 - 770-07489F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07491 Fuel Line Assembly, Universal - 5/16" Id X 80" L - 7491 - 770-07491F1
Each system comes complete with a large, alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging.
Scepter 07494 5/16" Primer Bulb - 7494 - 770-07494F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 07497 Fuel Fitting-Mercury Tank Bayonet, Metal - 7497 - 770-07497F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 07813 1/4" Primer Bulb - 7813 - 770-07813F1
Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.
Scepter 08580 Oem Choice Portable Fuel Tank, 6.6 Gal - 8580 - 770-08580F1
Sold around the world by leading outboard engine manufacturers like Tohatsu, Honda, Mercury, Yamaha and Suzuki. Trusted OEM choice for portable marine fuel tanks. Made of UV Stabilized, Rust and Corrosion Resistant HDPE for Maximum Durability2-Way Vented CapIncludes a universal 1/4" NPT fuel pick-up adapterMechanical direct sight gauge with easy-to-read indicatorISO & CSA certified, UL listedEPA/CARB Compliant
Scepter 09315 Epa/Carb Replacement Cap With Chain And Tether (Fits All Scepter Epa Portable Tanks) - 9315 - 770-09315F1
EPA/CARB approved cap with chain & tether. Fits all Scepter EPA portable tanks.
Scepter 09476 Fuel Fitting-Mercury Engine Bayonet - 9476 - 770-09476F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
Scepter 11522 Fuel Line Assembly, Universal 3/8" X 7' - 11522 - 770-11522F1
^EPA COMPLIANT/CARB CERTIFIEDProvides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications^08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter 11553 Fuel Connector, Quick Universal 3/8" Barb Female 1/4" Npt Male Stainless Steel - 11553 - 770-11553F1
OEM Choice! You will enjoy the confidence of knowing you're buying the same OEM quality in aftermarket replacement parts that are supplied to original equipment manufacturers. Scepter products meet or exceed government emissions regulations, helping to improve air quality and reduce exposure to toxic chemicals.
Scepter Csa Underseat Portable Fuel Tank-International Use, 3-Gal/11.4L - 10504 - 770-10504F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fi ttingsSturdy constructionSeamless one-piece polyethylene tank shell constructionAdvanced styling / highly functional designInternational tanks (Not ECO Check) meet CSA standards
Scepter Csa Underseat Portable Fuel Tank-International Use, 6 Gal/22.7L - 10509 - 770-10509F1
Convenient combination fuel pick-up / sight gaugeMolded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fi ttingsSturdy constructionSeamless one-piece polyethylene tank shell constructionAdvanced styling / highly functional designInternational tanks (Not ECO Check) meet CSA standards
Scepter Fr1G201 Smartcontrol™ Fuel Container Epa/Carb Compliant, Gasoline, 2 Gal, Red, 9.7"Lx6.9"Wx11.5"H - Fr1G201 - 770-Fr1G201F1
A new generation of gas cans featuring the Scepter SmartControl™ easy pour spout! The SmartControl system easy to use in a durable design. The SmartControl™ delivers fast fills without spills. Easy-push and controllable flow makes filling everything a cleaner, safer, better experience.
Scepter Fsck571 Smartcontrol™ Kerosene Fuel Container, 5 Gal Blue - Fsck571 - 770-Fsck571F1
Scepter® SmartControl™ fuel containers are the next generation of rugged gas cans that provide a clean, fast and hassle-free experience. Featuring a simple spout and flame mitigation device, this product eliminates frustration with an easy-to-use, durable design, and an added layer of protection. The SmartControl fuel container's squeeze controlled flow rate for a cleaner, safer, better experience - without spilling a drop. Easy to Pour Kerosene Can with Rear HandleFast Fills without the SpillsControllable FlowCARB / EPA Compliant
Scepter Jerry Can - Non Carb Compliant, 1-1/4 Gal. - 7081 - 770-07081F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: A reversible self-venting spout - no need to worry about separate vent closuresAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 2.5 Gal. - 7079 - 770-07079F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: A reversible self-venting spout - no need to worry about separate vent closuresAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 5.2 Gal. - 7622 - 770-07622F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: child resistant vent on the handle to improve flow ratesAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Jerry Can - Non Carb Compliant, 6.6 Gal. - 7539 - 770-07539F1
Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Non-Carb compliant cannot be sold in USA. Features: child resistant vent on the handle to improve flow ratesAll sizes easily attach to the Flo n' Go™ hand pump
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8309 - 770-08309F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8313 - 770-08313F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 3/8" X 7' Fuel Line Assembly - 8316 - 770-08316F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications 08309 - Clip style fuel line assembly for 1998 and newer engines. For 1997 and older build your own, select a 3/8" universal fuel line assembly and connect to tank with 05815 and connect to engine with 09476.
Scepter Marine 8190 Topside 12 Gallon Fuel Tank - Not For Sale In The U.S. - 8190 - 770-08190F1
Manufactured from high-density polyethylenewith UV-stabilized resinProvides positive seal with an injection molded 2-1/4" fill neckMechanically vented fuel capFeatures 90°, 1/4" NPT fuel withdrawal elbow (does not rotate)Includes mechanical direct-sight gauge with easy-to-read indicator tested to industry standardsSpecifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. Not for sale in the U.S.
Scepter Marine 8191 Topside 12 Gallon Low Profile Fuel Tank - Not For Sale In The U.S. - 8191 - 770-08191F1
Manufactured from high-density polyethylenewith UV-stabilized resin Provides positive seal with an injection molded 2-1/4" fill neckMechanically vented fuel capFeatures 90°, 1/4" NPT fuel withdrawal elbow (does not rotate)Includes mechanical direct-sight gauge with easy-to-read indicator tested to industry standardsSpecifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. Not for sale in the U.S.
Scepter Marine Primer Bulb - 10543 - 770-10543F1
EPA COMPLIANT/CARB CERTIFIED Maximizes engine performanceGasoline and solvent-resistant constructionDesigned for today's ethanol fuelsHigh flow capacity & dual internal check valves for quick, efficient priming
Scepter Marine Universal Fuel Line Assembly - 8312 - 770-08312F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications
Scepter Marine Universal Fuel Line Assembly - 8318 - 770-08318F1
EPA Compliant/CARB Certified Provides maximum fuel flow & superior engine performanceFor 2 & 4 cycle applicationsECO checked fuel lines are fully compatible for ethanol fuelsViton O-rings and internal stainless components ensure leak-proof connectionsFittings designed & manufactured to strict OEM specifications
Scepter Neptune Portable Fuel Tank - 8590 - 770-08590F1
The "ECO Check" line features a EPA/CARB approved fuel cap and a low permeation tank that virtually eliminates fuel evaporationMolded from UV stabilized, cross-linked polyethyleneAccepts standard 1/4 NPT marine tank fittings
Scepter Neptune Portable Fuel Tank - 8592 - 770-08592F1
The "ECO Check" line features a EPA/CARB approved fuel cap and a low permeation tank that virtually eliminates fuel evaporation Molded from UV stabilized, cross-linked polyethyleneAccepts standard 1/4 NPT marine tank fittings
Scepter Oem Choice Portable Fuel Tank - 8576 - 770-08576F1
Convenient combination fuel pick-up / sight gaugeMolded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scepter Rectangular Portable Fuel Tank - 8667 - 770-08667F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Rectangular Portable Fuel Tank - 8668 - 770-08668F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Rectangular Portable Fuel Tank - 8669 - 770-08669F1
Rectangular portable fuel tanks - EPA/Carb approved.
Scepter Under Seat Portable Fuel Tank - 10506 - 770-10506F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scepter Under Seat Portable Fuel Tank - 10511 - 770-10511F1
Convenient combination fuel pick-up / sight gauge Molded feet provide increased ventilation and stabilityAccepts standard 1/4 NPT marine tank fittingsAutomatic air inflow valve systemSeamless one-piece polyethylene tank shell construction
Scotch-Grip™ Rubber & Gasket Adhesive 847 - 19718 - 71-19718F1
A premium quality multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Resistant to most fuels and oil. Heat and solvent reactivatable. Curable with heat.
Scotty 1128 Belt Set For Depthpower Downriggers 2000 & Earlier - 1128 - 736-1128F1
1128: Spare drive belt set (1 large/1 small) for Depthpower electric downriggers. 2000 models and earlier.1129: Single drive belt for Depthpower electric downriggers. 2001 models and later.
Scotty 1129 Belt For Depthpower Downriggers 2001+ - 1129 - 736-1129F1
1128: Spare drive belt set (1 large/1 small) for Depthpower electric downriggers. 2000 models and earlier.1129: Single drive belt for Depthpower electric downriggers. 2001 models and later.
Scotty 2129 Kevlar Drive Belt For Hp Downriggers & #2500 Line Puller - 2129 - 736-2129F1
Kevlar drive belt for HP downriggers & #2500 Line Puller
Scotty Propack 1116 Depthpower 30"-60" Telescopting Electric Downrigger W/Swivel Mt. - 1116 - 736-1116F1
Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min.; 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt250' of 150 lb. test, stainless steel downrigger cable2 10" Tube style rod holdersIncludes Scotty/Marinco™ plug and receptacleThe lowest amperage draw - less than 1/3 than some of the competitionMarine grade stainless steel boom1148 weight storage hookMulti-position auto-stop included (Use 1008 Stopper Beads)Includes 2 Power Grip Plus line releaseIncludes 1023 tilt-up mounting bracketIncludes 1026 swivel mountLimited lifetime warranty
Screen Fuel Fltr 75-600Hp 4Str - 8M0090809 - 710-35-8M0090809F1
Sea Foam Deep Creep Lubricant - Dc14 - 821-Dc14F1
Cleans, penetrates, lubricates and dries, all from a 100% pure petroleum product. For use in all 2- and 4-cycle gas and diesel engines. Spray into carburetor to start engines. Use to clean and lubricate air tools, door locks, and guns. Hundreds of household and shop uses. Deep Creep works with instant action and is oxygen sensor safe.
Sea Foam Sf16 Motor Tune Up, 16 Oz. - Sf16 - 821-Sf16F1
A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2- and 4-cycle. Cleans dirty engine parts internally by removing harmful gums, varnish and carbon build upRemoves moisture from oil crankcases and fuel tanksStabilizes and conditions fuels from becoming staleExcellent for engine storageFor Peak Performance use every 5,000 miles
Sea Foam Sf55 Motor Tune Up, Gal. - Sf128 - 821-Sf128F1
A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2- and 4-cycle. Cleans dirty engine parts internally by removing harmful gums, varnish and carbon build upRemoves moisture from oil crankcases and fuel tanksStabilizes and conditions fuels from becoming staleExcellent for engine storageFor Peak Performance use every 5,000 miles
Sea Water Pump - 807151A12 - 710-46-807151A12F1
Please see manufacturer application guides for complete application references.
Sea Water Pump W/Air Fit Ss<46-8M0137218 - 8M0139997 - 710-46-8M0139997F1
Sea Water Pump-V-8 W/V-Belt - 72774A32 - 710-46-72774A32F1
Please see manufacturer application guides for complete application references.
Sea-Dog 2218401 Stainless Hatch Cover Pull W/O Rubber Gasket - 221840-1 - 354-2218401F1
Highly corrosion-resistant, this hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16" hole. Flange pull is 1-1/4" in diameter x 1/8" thick.
Sea-Dog 221841 Replacement Rubber Gasket Only - 221841 - 354-221841F1
Rubber Gasket Only for hatch cover pull.
Sea-Dog 2218421 Stainless Hatch Cover Pull W/Rubber Gasket - 221842-1 - 354-2218421F1
Highly corrosion-resistant, this hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit, and a rubber gasket to reduce noise and resist water penetration. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16" hole. Flange pull is 1-1/4" in diameter x 1/8" thick.
Sea-Dog 327150 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150 - 354-327150F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 3271501 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150-1 - 354-3271501F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. The two-piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc.
Sea-Dog 327151 Rail Mount Motor Bracket,, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", Black - 327151 - 354-327151F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 364190 Polycarbonate Cover For Poly In-Line Strainer - 364190 - 354-364190F1
Polycarbonate cover for strainer
Sea-Dog 4-Position Ignition Switch - 420356-1 - 354-4203561F1
Stamped brass. Functions: Acc.-Off-Ignition-Start. Rated: Ignition 15 Amp @ 12VDC, Solenoid 30 Amp @ 12VDC, Accessory 15 Amp @ 12VDC.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420385-1 - 354-4203851F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420386-1 - 354-4203861F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4203601 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420360-1 - 354-4203601F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203611 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420361-1 - 354-4203611F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203651 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420365-1 - 354-4203651F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203661 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420366-1 - 354-4203661F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4204871 Safety Ignition Kill Switch - 420487-1 - 354-4204871F1
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. Kill switches include a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Sea-Dog 520021 Replacement Plug And Gasket - 520021 - 354-520021F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Dog 5200211 Replacement Plug And Gasket, Pair - 520021-1 - 354-5200211F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Lect Designs Flush Mount Rod Holder Kit (W/ Gasket & Hardware) - K325162-9 - 680-K3251629F1
Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holder Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holderConstructed of durable Injection Molded ABSKit includes flush mount rod holder (1), gasket w/ cap (1), rod holder leash fitting (1), 10-32 X 1-1/4" OH (3), 10-32 Nyloc nut (3), #10 flat washer (3), #10 well nut (3)A: 9-3/16" / B: 1-5/8" / C: 2-1/2" / D: 2-5/8"Rod Holder made in the USA (Everett, WA)!
Seachoice 1.980" Grease Caps (2 Per Pack) - 53631 - 50-53631F1
Steel caps for most common applicationused in bearing kits.
Seachoice 10 Micron Fuel/Water Separating Filter With See Thru Plastic Bowl For Outboards - 20931 - 50-20931 Superseded By: 50-22303F1
Reusable see-thru plastic bowl with drain, and 10 micron filter (20951).
