Select Category
Engine & Fuel
Seachoice 10' Coiled Extension Cord - 15051 - 50-15051F1
10' Coiled Extension Cord, 12V
Seachoice 11621 3 Position Heavy Duty Ignition Starter Switch - 50-11621 - 50-11621F1
3 Position: Off - Ignition - Start. 15A @ 12V DC. Chrome plated brass face nut and brass back-up nut.. Supplied with two keys. Stainless steel springs. 11621: Mounting stem 1-7/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 1-7/16"L, 13/16" - 20 thread dia. Overall Dimensions: 3-1/4"L; 1-7/16
Seachoice 11641 3 Position Heavy Duty Ignition Starter Switch - 50-11641 - 50-11641F1
3 Position: Off - Ignition - Start. 15A @ 12V DC. Chrome plated brass face nut and brass back-up nut.. Supplied with two keys. Stainless steel springs. 11621: Mounting stem 1-7/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 1-7/16"L, 13/16" - 20 thread dia. Overall Dimensions: 3-1/4"L; 1-7/16
Seachoice 11821 3 Position Magneto Ignition Switch, 6 Screw - 11821 - 50-11821F1
3 Positions: Off - Ignition - Start. "Push to Choke." Includes two keys. Stem Width: 13/16"Ignition: 15 Amps @ 12VSolenoid: 30 Amps @ 12VChoke: 7 Amps @ 12V"
Seachoice 11831 3 Position Magneto Ignition Switch, 6 Wire - 11831 - 50-11831F1
3 Positions: Off - Ignition - Start. "Push to Choke." Includes two keys. Stem Width: 13/16"Ignition: 15 Amps @ 12VSolenoid: 30 Amps @ 12VChoke: 7 Amps @ 12V" 11831 Wires: Red = 12V+, Purple = ignition, Black/Magenta = ground, Black/Yellow = magneto, Yellow/Black = choke
Seachoice 15441 Fuel Gauge, Black Bezel - 15441 - 50-15441F1
15501: Combination of 15421 and 15441. 15421: Fuel Gauge Sender: Adjustable depth from 6" to 27". Fits most tanks. Includes gasket. Resistance value 240 ohms (empty) to 33 ohms (full). 15441: Fuel Gauge: Black bezel low profile fuel gauge for 12V negative ground systems. Use in conjunction with Model 15421 fuel sender. Complete with light kit.
Seachoice 17797 Impeller, F6B Series - 09-812B-1Sc - 50-17797 Superseded By: 50-17783F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17798 Impeller, F4B Series - 09-810B-1Sc - 50-17798 Superseded By: 50-17784F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17799 Impeller, F5B - 09-1027B-1Sc - 50-17799 Superseded By: 50-17786F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17893 Impeller, F5B Series - 09-1027B-10Sc - 50-17893 Superseded By: 50-17787F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17894 Impeller, F35 Series - 09-808B-1Sc - 50-17894 Superseded By: 50-17788F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17896 Impeller, F7 Series - 09-1028Bt-1Sc - 50-17896 Superseded By: 50-17789F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 19173 Small Filter Wrench, 2-3/4" - 3-3/4" - 19173 - 50-19173F1
High-quality steel construction with non-slip comfortable gripHandle swivels 180° to clear obstructions and makes it easy-to-turn in tight spots or hard-to-reach places1" wide band provides strong gripUnique yoke and link assembly allows a strong grip and prevents crushed filtersStudded band for a firm grip and non-slip removalPlated yoke and a blackened band resists rust, oxidation and corrosionFits most standard boat, car and truck filters
Seachoice 19174 Large Filter Wrench, 3-1/4" - 3-7/8" - 191744 - 50-19174F1
High-quality steel construction with non-slip comfortable gripHandle swivels 180° to clear obstructions and makes it easy-to-turn in tight spots or hard-to-reach places1" wide band provides strong gripUnique yoke and link assembly allows a strong grip and prevents crushed filtersStudded band for a firm grip and non-slip removalPlated yoke and a blackened band resists rust, oxidation and corrosionFits most standard boat, car and truck filters
Seachoice 2-Cycle Engine, Oil To Gas Measuring Container, 32 Oz., Wide Mouth Bottle - 21000 - 50-21000F1
This plastic, quart-size bottle lets you add the correct amount of 2-cycle (2-stroke) engine oil needed for the volume of gas in your gas can. Once you know the oil-to-gas ratio for your 2-cycle engine, simply fill your gas can (not included) with gas, then pour the oil into the Seachoice measuring container according to the amount of gas you pumped into the can, and finally, pour the oil from the Seachoice container into your gas can to mix. Gas volume marks on the container are in gallons and liters. Ideal for 100:1, 50:1, 40:1 and 24:1 ratios. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Measure the correct amount of 2-cycle engine oil every timeClear plastic bottle has gas-volume markings in liters and gallonsDetermines ratios for 100:1, 50:1, 40:1 and 24:1 oil-to-gas mixturesDesigned to prevent fouled plugs or seized engines caused by an incorrect amount of oil32-ounce capacity
Seachoice 20291 Gold-Flo High Performance Electronic 34 Gph Fuel Pump Kit 5.5 - 4 Psi - 50-20291 - 50-20291F1
This rugged, lightweight, solid state fuel pump provides the high output performance required by heavy duty construction, agricultural, industrial, marine or military equipment in addition to the power plant requirements of sports cars, sedans, light trucks and SUV's. Compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. 24" Lift. 20291: 1/4 x 18 Thread w/o Shut-Off Valve, 24" Lift Easy to installCoast Guard ignition test approved74 Micron filter includedReliable solid state design provides longer lifeMade in U.S.A. by FACET
Seachoice 20391 Clear Gas & Diesel Fuel Filter For Cube Electronic Fuel Pump Kit, 3/8" - 50-20391 - 50-20391F1
Gasoline And Diesel Fuel Filter for Cube and POSI-FLO® Fuel Pumps.Compatible with gasoline, diesel, biodiesel, E85, and fuel additives. 74 micronInstalls directly to the inlet of the Cube and POSI-FLO® fuel pump8X more total surface area than the 479735 and FEP735 filtersUL ListedClear housing to ensure proper fuel filter maintenanceTorque 10 foot poundsThreads: 1/8"-27
Seachoice 20401 Steel Gas & Diesel Fuel Filter For Cube Electronic Fuel Pump Kit, 5/16" - - 50-20401F1
Gasoline And Diesel Fuel Filter for Cube and POSI-FLO® Fuel Pumps.Compatible with gasoline, diesel, biodiesel, E85, and fuel additives. 74 micronInstalls directly to the inlet of the Cube and POSI-FLO® fuel pump8X more total surface area than the 479735 and FEP735 filtersUL ListedClear housing to ensure proper fuel filter maintenanceTorque 10 foot poundsThreads: 1/8"-27
Seachoice 20711 90 Degree Brass Fuel Elbow - 50-20711 - 50-20711F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20851 90 Degree Brass Fuel Elbow - 50-20851 - 50-20851F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20861 90 Degree Brass Fuel Elbow - 50-20861 - 50-20861F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20871 90 Degree Brass Fuel Elbow - 50-20871 - 50-20871F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited.
Seachoice 20881 90 Degree Brass Fuel Elbow - 50-20881 - 50-20881F1
All brass machined fittings. Ideal for fuel fitting applications. Excellent for use with fuel/water separator where space is limited. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice 20911 Fuel/Water Separator Canister Only - 20911 - 50-20911 Superseded By: 50-20934F1
Universal 3/8" Ports. 20911 Replaces:Seachoice 20911, Valmar 52113, Sierra 7844, Racor PFF 5510, Moeller 03332410, Mercury 35-802893Q01, Marpac 7-0860
Seachoice 20913 Fuel/Water Separator Filter Only - 20913 - 50-20913 Superseded By: 50-20933F1
10 Micron 10 MicronMeets OEM specifications
Seachoice 20914 Fuel/Water Separator Filter Only - 20914 - 50-20914 Superseded By: 50-20936F1
10 MicronMeets OEM specifications
Seachoice 20916 Fuel/Water Separator Filter Only - 20916 - 50-20916 Superseded By: 50-20937F1
10 MicronMeets OEM specifications
Seachoice 20917 Fuel/Water Separator Filter Only - 20917 - 50-20917 Superseded By: 50-20938F1
10 MicronMeets OEM specifications
Seachoice 20937 Fuel/Water Separating Filter - Sfc-85450-V106 - 50-20937F1
Replaces: Volvo: 3852413, 3851218 & 3862228; OMC: 502906; Sierra: 18-7989; Mercury Marine: 35-8M015477210 MicronRemoves water contamination to ensure only clean and pure fuel is delivered to the engineFor use with 2 and 4 stroke outboard enginesWater-shedding Cellulose filter element ensures clean fuelCoated steel canister prevents corrosionProduced in an ISO (TS1649) Certified Facility to meet or exceed industry standards
Seachoice 20951 Fuel Water Separating Filter Only - 20951 - 50-20951 Superseded By: 50-22304F1
10 MicronMeets OEM specifications
Seachoice 21071 Premium Oil Filter - 21071 - 50-21071 Superseded By: 50-21001F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21073 Premium Oil Filter - 21073 - 50-21073 Superseded By: 50-21006F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21074 Premium Oil Filter - 21074 - 50-21074 Superseded By: 50-21007F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21076 Premium Oil Filter - 21076 - 50-21076 Superseded By: 50-21024F1
20 Micron high-efficiency filtersMeet OEM specificationsEpoxy coated inside for corrosion resistance
Seachoice 21223 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 3/8" X 50' - 315-0386 - 50-21223F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 21233 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/16" X 50' - 315-0566 - 50-21233F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 21371 Fuel Line Assemblies - Outboard Engines Omc/Johnson/Evinrude, 3/8" X 6' - 21371 - 50-21371F1
Meets all EPA, CARB, USCG and ABYC Requirements Includes: Low permeation primer bulb, fuel line fittings, stainless steel hose clamps and 3/8" fiber-reinforced fuel line for additional strength and kink resistance. Faster priming fuel line assembly with 3/8" ID ensures maximum fuel flow to meet today's higher horsepower enginesKink resistant heavy duty fuel lineCompatible with ethanol blended fuelsBulb engineered to maintain flexibility and prevent collapse in hot and cold temperaturesSpring loaded check valves ensure for quicker primer in any position vertical or horizontalStainless Steel Clamps to ensure leak free connections
Seachoice 21381 Low Perm Fuel Line Kit - Yamaha, 3/8" X 6' - 21381 - 50-21381F1
Meets all EPA, CARB, USCG and ABYC Requirements Includes: Low permeation primer bulb, fuel line fittings, stainless steel hose clamps and 3/8" fiber-reinforced fuel line for additional strength and kink resistance. Fast priming high output primer bulbKink resistant heavy duty fuel lineCompatible with ethanol blended fuelsEngineered low permeation material prevents fuel evaporation, saving fuel and moneyBulb engineered to maintain flexibility and prevent collapse in hot and cold temperaturesIndustry leading vertical fuel draw for priming in any application
Seachoice 23061 90 Degree Stainless Steel Flush Mount Fuel Vent For 5/8" Hose - 50-23061 - 50-23061F1
On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage - or be damaged by hull bumps and scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system.
Seachoice 23701 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/8" X 25' - 315-0585 - 50-23701F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 23703 Type B1/B2 Fuel Feed & Vent Hose - 315 Series 5/8" X 50' - 315-0586 - 50-23703F1
Excellent quality marine outboard fuel hose that meets or exceeds all requirements to ISO 7469, SAE J1527, USCG Type B1 & B2, CE, ABYC H24 and H33, NMMA Type Accepted standards and is CE certified. For use in non-enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range is -20°F 180°F (-29°C to 82°C).
Seachoice 23704 Type A1 Fuel Tank And Feed Hose - 350 Series5/8" X 10' - 350-0583 - 50-23704F1
Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility-4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C).
Seachoice 23706 Type A1 Fuel Tank And Feed Hose - 350 Series5/8" X 25' - 350-0585 - 50-23706F1
Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility-4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C).
Seachoice 23707 Type A1 Fuel Tank And Feed Hose - 350 Series5/8" X 50' - 350-0586 - 50-23707F1
Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility-4-ply construction. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C).
Seachoice 23711 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 1-1/2" X 10' - 350-1123 - 50-23711F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23712 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series,1-1/2" X 12-1/2' - 350-1124 - 50-23712F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23713 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 1-1/2" X 25' - 350-1125 - 50-23713F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23714 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 1-1/2" X 50' - 350-1126 - 50-23714F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23715 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 2" X 10' - 350-2003 - 50-23715F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23716 Type A2 Hardwall Single Wire Fuel Tank Fill Hose - 350 Series, 2" X 12-1/2' - 350-2004 - 50-23716F1
Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius.©4-ply construction. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C).
Seachoice 23724 Type A1-15 Low Permeation Fuel Hose - 360 Series, 1/4" X 25' - 360-0145 - 50-23724 Superseded By: 50-23744F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23726 Type A1-15 Low Permeation Fuel Hose - 360 Series, 1/4" X 50' - 360-0146 - 50-23726 Superseded By: 50-23746F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23727 Type A1-15 Low Permeation Fuel Hose - 360 Series, 5/16" X 25' - 360-0565 - 50-23727 Superseded By: 50-23747F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23728 Type A1-15 Low Permeation Fuel Hose - 360 Series, 5/16" X 50' - 360-0566 - 50-23728 Superseded By: 50-23748F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F° 180 F° (-29 C° to 82 C°).
Seachoice 23730 Type A1-15 Low Permeation Fuel Hose - 360 Series, 3/8" X 250' - 360-0380 - 50-23730 Superseded By: 50-23750F1
Premium quality marine low permeation (barrier) fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20 F? 180 F? (-29 C? to 82 C?).
Seachoice 23741 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/2" X 25' - 365-0125 - 50-23741F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23743 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/2" X 50' - 365-0126 - 50-23743F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23744 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/4" I.D., 25' Length - 365-0145 - 50-23744F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23746 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/4" X 50' Length - 365-0146 - 50-23746F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23747 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 5/16" X 25' Length - 365-0565 - 50-23747F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23748 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 5/16" X 50' Length - 365-0566 - 50-23748F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23749 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 25' - 365-0385 - 50-23749F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23750 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 250' - 365-0380 - 50-23750F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23751 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 50' - 365-0386 - 50-23751F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 25' White Poly Coiled Washdown Hose With Sprayer - 50-79691 - 50-79691F1
White poly hose is UV and chemical resistant and has brass hose fittings- perfect for marine, boat, RV, and garden usage.
Seachoice 28693 Propeller Hub Kit, Yamaha® Outboards & Stern Drives With V-4 & V-6 Gear Case © 1980 & Newer - 50-28693 - 50-28693F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and spacer
Seachoice 28694 Propeller Hub Kit,Honda® Outboards 75-90 Hp - 1999 & Newer, 115-130 Hp - 50-28694 - 50-28694F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28696 Propeller Hub Kit, Suzuki® 150-300 Hp 4-Stroke & 150-225 Hp 2-Stroke Outboards - 50-28696 - 50-28696F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28701 3-Blade Aluminum Propeller, 15" Pitch, 15-1/4" Dia., Rh Rotation - 50-28701 - 50-28701F1
Seachoice 28701 3-Blade Aluminum Propeller is an excellent performance and value in a replacement propeller for most stern drives and outboards (90hp - 350hp / 4.75" Gear case). Made with a special low-copper alloy for excellent toughness and corrosion resistance. Die-case contrucion allows for uniform blade positioning and durable powder coating contributes to a smoother, longer lasting product. Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28703 3-Blade Aluminum Propeller, 17" Pitch, 15" Dia., Rh Rotation - 28703 - 50-28703F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28705 3-Blade Aluminum Propeller, 19" Pitch, 14-1/2" Dia., Rh Rotation - 28705 - 50-28705F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28707 3-Blade Aluminum Propeller, 21" Pitch, 14-1/2" Dia., Rh Rotation - 28707 - 50-28707F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28711 3-Blade Aluminum Propeller, 13" Pitch, 14" Dia., Rh Rotation - 28711 - 50-28711F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28713 3-Blade Aluminum Propeller, 15" Pitch, 13-3/4" Dia., Rh Rotation - 28713 - 50-28713F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28715 3-Blade Aluminum Propeller, 17" Pitch, 13-1/4" Dia., Rh Rotation - 28715 - 50-28715F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28717 3-Blade Aluminum Propeller, 19" Pitch, 13" Dia., Rh Rotation - 28717 - 50-28717F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28721 4-Blade Aluminum Propeller, 14" Pitch, 14" Dia., Rh Rotation - 28721 - 50-28721F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28723 4-Blade Aluminum Propeller, 17" Pitch, 14" Dia., Rh Rotation - 28723 - 50-28723F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28725 4-Blade Aluminum Propeller, 19" Pitch, 14" Dia., Rh Rotation - 28725 - 50-28725F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60331 - 50-60331F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60341 - 50-60341F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60351 - 50-60351F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60361 - 50-60361F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60371 - 50-60371F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60441 - 50-60441F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60451 - 50-60451F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60461 - 50-60461F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60471 - 50-60471F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60481 - 50-60481F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61501 - 50-61501F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61511 - 50-61511F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61521 - 50-61521F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61531 - 50-61531F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61541 - 50-61541F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62601 - 50-62601F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62611 - 50-62611F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62621 - 50-62621F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/4" X 3" Assorted Colors (4 Per Pack) - 62221 - 50-62221F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/8" X 3", Assorted Colors (5 Per Pack) - 62191 - 50-62191F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant, Black With Assorted Sizes 1/8" To 1/2" X 3" (5 Per Pack) - 62201 - 50-62201F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Sizes
