Select Category
General
Attwood Collector Box For 1423,1424,1425,1426,1494,1496A - 1341-1 - 23-13411F1
Cut-outs for two 3' I.D. hoses. Corrosion-resistant plastic. For use w/plastic venturi, flush louvered, or trimline vent.
Attwood Collector Box For 1495 Vent - 1345-1 - 23-13451F1
Use with plastic louvered vent, with two 3" I.D. wire supported ventilation hoses. Box fastens to vent with screws or pop rivets, vent then fastens to the deck. Corrosion-resistant plastic.
Attwood Cowl Ventilator 6" - 1364A3 - 23-1364A3F1
Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Chrome-plated zinc. Flange is non corrosive plastic. Installs with #8 fasteners.
Attwood Deck Plate 6" White - 12792-1 - 23-127921F1
Allows additional storage options to your canoe, kayak or small boat access unusable spaces and for inspection of and general access to valves and deck vents. Easy opening, screw-out design - no tools required. High-impact ABS plastic with textured surface. Durable, rugged, weather-resistant. Flange is pre-drilled for #8 screws.
Attwood Extension Aluminum 16" Threaded - 2164-T - 148-2164Tf1
Fixed height 3/4" pin post. 1.5" diameter brushed aluminum posts. Steel pin.
Attwood Flush Base For Sure Grip Rod Holder - 1158245 - 23-50713F1
Fit a variety of mounting surfaces including rails Constructed of extruded aluminum
Attwood Flush Cleat 4-1/2" - 66512-7 - 23-665127F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2", Counter-Sunk - 66510-7 - 23-665107F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 6" - 66516-7 - 23-665167F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 8" - 66524-1 - 23-665241F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Fold Up Drink Holder Black - 199241 - 23-24457F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Drink Holder White - 200702 - 23-24497F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Herreshoff Cleat Heavy Duty, 8" - 66110-3 - 23-661103F1
This heavy-duty herreshoff is a wider, taller, heavier version of the herreshoff cleat. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Hollow Base Cleat Die Cast Zamak With Chrome Finish 4-1/2" (2/Pk) - 1586767 - 23-62446F1
The clean lines and modern look of these cleats are in tune with styling of today's boats. Enhanced 316 Stainless Steel construction.
Attwood Large Flush Lift Ring, Chrome Plated Brass - 520532 - 23-33253F1
Chrome-plated brass. Provides strength for lifting large and heavy hatch covers.
Attwood Louvered Vent Flush Mount-Black - 1423-5 - 23-14235F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent Flush Mount-White - 1425-5 - 23-14255F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent, Off White - 1495-1 - 23-14951F1
Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. For 3" I.D. ventilation system use with 13451 collector box. Installs with #8 fasteners. Dimensions: 17-7/8" L x 3-7/16" H x 3/4" D
Attwood Neat Cleat 4-1/2" - 66515-7 - 23-665157F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 6" - 66517-7 - 23-665177F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 8" - 66519-1 - 23-665191F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Nylon Bushing For Bases And Posts - Sp-201 - 148-Sp201F1
Nylon Bushing for Bases and Posts
Attwood Push/Pull Switch Three-Position - 2079752 - 23-75943F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Push/Pull Switch Two-Position - 2068521 - 23-75636F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Rectangular Flush Hatch Pull - 46569 - 23-20277F1
The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
Attwood Replacement 360 Degree Globe For Series 6700 - 1762052 - 23-6724051F1
Replacement 360° Globe For Series 6700
Attwood Replacement Anti-Glare Lens For 3900 Series - 912021-7 - 23-9120217F1
Replacement Anti-Glare Lens For 3900 Series
Attwood Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340 - 912852-7 - 23-9128527F1
Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340
Attwood Rod Holder Combo Mount Black - 1136452 - 23-50117F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50227: Flush mount, mounts to gunwale or deck. Easy-open cover conceals fasteners and elastomeric liner seals water out. When closed, the low-profile, contoured design avoids snagging.50117/5011W7: Combo side/surface mount can be used on a vertical or horizontal surface or used with the 50127 rail adapter.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Rod Holder Flush Mount Black - 1140470 - 23-50227F1
Flush mount, interchangeable mounting base fits 2-in 1, Pro Series, and Mini Rigger fishing systems. Mounts to gunwale or deck. Easy-open cover conceals
Attwood Rod Storage Holder - 12750-6 - 23-127506F1
Holds up to 3 fishing rods. Closed cell foam insert protects rod. Mount vertical or horizontal. 8-3/4"L x 2-1/2" W.
Attwood Sl1205 Gas Spring 10" Extended, 7" Compressed, Blade Style, 20 Lbs. - Sl1-20-5 - 23-Sl1205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl1405 Gas Spring 10" Extended, 7" Compressed, Blade Style, 40 Lbs. - Sl1-40-5 - 23-Sl1405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl2405 Gas Spring 15" Extended, 9.5" Compressed, Blade Style, 40 Lbs. - Sl2-40-5 - 23-Sl2405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl27100 Gas Spring 28" Extended, 16.5" Compressed, 100 Lbs. - Sl27-100-1 - 23-Sl27100 Superseded By: 23-Sl271001F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl30205 Gas Spring 10" Extended, 7" Compressed, 20 Lbs. - Sl30-20-5 - 23-Sl30205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl30405 Gas Spring 10" Extended, 7" Compressed, 40 Lbs. - Sl30-40-5 - 23-Sl30405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl31205 Gas Spring 7.5" Extended, 5.25" Compressed, 20 Lbs. - Sl31-20-5 - 23-Sl31205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl31305 Gas Spring 7.5" Extended, 5.25" Compressed, 30 Lbs. - Sl31-30-5 - 23-Sl31305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl31405 Gas Spring 7.5" Extended, 5.25" Compressed, 40 Lbs. - Sl31-40-5 - 23-Sl31405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl32305 Gas Spring 10.5" Extended, 7.5" Compressed, 30 Lbs. - Sl32-30-5 - 23-Sl32305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl33205 Gas Spring 15" Extended, 9.5" Compressed, 20 Lbs. - Sl33-20-5 - 23-Sl33205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl33405 Gas Spring 15" Extended, 9.5" Compressed, 40 Lbs. - Sl33-40-5 - 23-Sl33405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl33605 Gas Spring 15" Extended, 9.5" Compressed, 60 Lbs. - Sl33-60-5 - 23-Sl33605F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl341205 Gas Spring 20" Extended, 12" Compressed, 120 Lbs. - Sl34-120-5 - 23-Sl341205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34205 Gas Spring 20" Extended, 12" Compressed, 20 Lbs. - Sl34-20-5 - 23-Sl34205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34305 Gas Spring 20" Extended, 12" Compressed, 30 Lbs. - Sl34-30-5 - 23-Sl34305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34405 Gas Spring 20" Extended, 12" Compressesd, 40 Lbs. - Sl34-40-5 - 23-Sl34405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34605 Gas Spring 20" Extended, 12" Compressed, 60 Lbs. - Sl34-60-5 - 23-Sl34605F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl34905 Gas Spring 20" Extended, 12" Compressed, 90 Lbs. - Sl34-90-5 - 23-Sl34905F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl35305 Gas Spring 8.46" Extended, 12.04" Compressed, 30 Lbs. - Sl35-30-5 - 23-Sl35305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl35405 Gas Spring 8.46" Extended, 12.04" Compressed, 40 Lbs. - Sl35-40-5 - 23-Sl35405F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36205 Gas Spring 17.2" Extended, 10.2" Compressed, 20 Lbs. - Sl36-20-5 - 23-Sl36205F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36305 Gas Spring 17.2" Extended, 10.2" Compressed, 30 Lbs. - Sl36-30-5 - 23-Sl36305F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36505 Gas Spring 17.2" Extended, 10.2" Compressed, 50 Lbs. - Sl36-50-5 - 23-Sl36505F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36705 Gas Spring 17.2" Extended, 10.2" Comprssed, 70 Lbs. - Sl36-70-5 - 23-Sl36705F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Sl36905 Gas Spring 17.2" Extended, 10.2" Compressed, 90 Lbs. - Sl36-90-5 - 23-Sl36905F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Spare Tire Carrier - 11090-3 - 23-110903F1
Square bend u-bolt with bracket mounts tire on tongue or trailer frame. Fits frames 2" square or rectangular 3-1/2" x 4". Fits 4 or 5 lug hole rims. Extra long 8-1/2" shaft fits 8" to 15" tires. Padlock is not included.
Attwood St11401 Gas Spring 7.5" Extended, 5.25" Compressed, 40 Lbs. - St11-40-1 - 23-St11401F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Stainless Gas Spring 8Mm Rod 10.5" Extended, 7.5" Compressed, 30 Lb - St32-30-5 - 23-St32305F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 12" Extended, 8.5" Compressed, 60 Lb - St35-60-5 - 23-St35605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 20 Lb - St33-20-5 - 23-St33205F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 40 Lb - St33-40-5 - 23-St33405F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 60 Lb - St33-60-5 - 23-St33605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 17.2" Extended, 10.2" Compressed, 70 Lb - St36-70-5 - 23-St36705F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 17.2" Extended, 10.2" Compressed, 90 Lb - St36-90-5 - 23-St36905F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 20 Lb - St34-20-5 - 23-St34205F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 40 Lb - St34-40-5 - 23-St34405F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 60 Lb - St34-60-5 - 23-St34605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 90 Lb - St34-90-5 - 23-St34905F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Standard Glove Box Black - 269551 - 23-26381F1
Plastic box and door are lightweight and sturdy. Opens easily on a stainless steel hinge pin and locks with a marine locking latch. Installation hole size is 12"L x 4-1/4"H.
Attwood Sure Grip Rod Holder 5 Degree 8" Horizontal - 1154593 - 23-50613F1
Designed for drift fishing, pan fishing, and more 3/8" diameter coated steel rodUV-resistant plastic coating, protects the rod butt and handleStainless steel wing nut and stemAll Include 50713 surface mount
Attwood Vent-Venturi Black - 1494A5 - 23-1494A5F1
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D
Attwood Wedge 2" Fixed Post 11" - Sp-28911 - 148-Sp28911F1
Satin anodized finish. Not recommended for use with other manufacturers' products.
Attwood Wedge 2" Fixed Post 13" - Sp-28913 - 148-Sp28913F1
Satin anodized finish. Not recommended for use with other manufacturers' products.
Attwood Wedge Base Plate 9" - Sp-68914 - 148-Sp68914F1
Brushed aluminum Required mounting hole: 3.25"Fits 2" & 2-3/8" posts
Attwood Whitley Cleat - 66064-1 - 23-660641F1
Unique offset design, polished stainless finish provides an attractive, premium appearance. Enhanced 316 stainless steel construction, acid and rinsing baths remove surface contaminants and produce a mirror-finish hydrous oxide film. Stainless steel locking buts and washers are supplied to fit the concealed stainless steel studs.
Auto Float Switch Only 12V + - 840971 - 23-42027F1
Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty.
Automatic Flapper Drain Plug Set - 051011-10 - 114-05101110F1
Flapper will automatically allow for water to drain from the hull when boat is under wayWater tight seal when the boat is at a stopFlexible neoprene plug inserts in the transom drain hole
Autonet 2.75" X 10M Roll, 120G - Ae-570-120 - 465-Ae570120F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 2.75" X 10M Roll, 180G - Ae-570-180 - 465-Ae570180F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 2.75" X 10M Roll, 240G - Ae-570-240 - 465-Ae570240F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 2.75" X 10M Roll, 320G - Ae-570-320 - 465-Ae570320F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 2.75" X 10M Roll, 80G - Ae-570-080 - 465-Ae570080F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 120G 50/Pk - Ae23205012 - 465-Ae23205012F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 150G 50/Pk - Ae23205015 - 465-Ae23205015F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 180G 50/Pk - Ae23205018 - 465-Ae23205018F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 240G 50/Pk - Ae23205025 - 465-Ae23205025F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 320G 50/Pk - Ae23205032 - 465-Ae23205032F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 400G 50/Pk - Ae23205041 - 465-Ae23205041F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 600G 50/Pk - Ae23205061 - 465-Ae23205061F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 5" Disc, 80G 50/Pk - Ae23205080 - 465-Ae23205080F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 6" Disc, 120G 50/Pk - Ae24105012 - 465-Ae24105012F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 6" Disc, 150G 50/Pk - Ae24105015 - 465-Ae24105015F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 6" Disc, 180G 50/Pk - Ae24105018 - 465-Ae24105018F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 6" Disc, 240G 50/Pk - Ae24105025 - 465-Ae24105025F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
Autonet 6" Disc, 320G 50/Pk - Ae24105032 - 465-Ae24105032F1
Grip (hook & loop) fastened with patented open weave, net structure for dust free sanding. The net yields greater efficiency than paper discs with holes or perforations. Eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.
