Select Category
General
Crc 1752538 Evapo-Rust® Heavy Duty Rust Remover, 1 Gallon - 1752538 - 77-1752538F1
Evapo-Rust® is a non-corrosive rust remover dip for restoring rusty treasures. Use to remove rust to bare metal without sanding or scrubbing. Evapo-Rust® is the best rust remover available on the market today. Simple and easy to use, with no need for mixing. The solution comes ready to use. Just soak, rinse, and reuse.
Crc 1752540 Evapo-Rust® Heavy Duty Rust Remover, 3.5 Gal. - 1752540 - 77-1752540F1
Evapo-Rust® is a non-corrosive rust remover dip for restoring rusty treasures. Use to remove rust to bare metal without sanding or scrubbing. Evapo-Rust® is the best rust remover available on the market today. Simple and easy to use, with no need for mixing. The solution comes ready to use. Just soak, rinse, and reuse.
Crc 1752903 Evapo-Rust® Super Safe Rust Remover, 8 Oz (Gel) - 1752903 - 77-1752903F1
EVAPO-RUST® rust remover is a water-based product that removes rust to bare metal, without scrubbing or sanding. It is easy to use, so anyone can restore their rusted tools, auto parts, hardware, cookware, and even firearms to like-new condition. Since Evapo-Rust® Super Safe Rust Remover is reusable, one gallon will remove 1/2 lb of dry rust. 1752903 Evapo-Rust® Gel: combines the rust removing power of Evapo-Rust® with the ability to cling to vertical surfaces.
Crc Bug Blast, 20 Oz. - 72010 - 77-72010F1
Fast acting, high strength insecticide. Ergonomic trigger that provides control, even with gloved hands, and is accurate up to 15' away Plastic safe - will not damage plastic connectors and other insulating materials.
Crc Freeze Off Super Penetrant - 75222 - 77-75222F1
A unique formula that immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks rusted surfaces, allowing Freeze-Off® to reach deeper & work more effectively than other penetrants.
Crc Freeze Off Super Penetrant - 77-05002 - 77-05002F1
A unique formula that immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks rusted surfaces, allowing Freeze-Off® to reach deeper & work more effectively than other penetrants. Low VOC Formula.
Crc Heavy Duty Silicone - 75074 - 77-75074F1
A multi-purpose silicone spray. Forms a colorless, odorless, non-staining film that lubricates & protects in most metal to non-metal applications. Dry film eliminates binding and sticking while protecting most surfaces.
Crc Marine Heavy Duty Silicone - 6077 - 77-06077F1
Clean, odorless, non-staining film. Highly water resistant. Fights corrosion. Lubricates wood, nylon, rubber, metals, canvas and leather. Eliminates squeaking and binding. Lubricates from -40°F to 400°F.
Cream Hardener - White - 101607 - 75-101607F1
Hardening agent for use with all polyester fillers. White BPO formula maintains color of filler to minimize excessive priming.
Crooked Creek Marine Gray Wood Oar - 50415 - 452-50415F1
Lightweight but built for performance. Multi-ply laminated construction for strength. Waterproof gray polyurethane finish. Epoxy blade tip for durability. Traditional 1-3/8" shaft and grips. 1 Year Warranty.
Crosby Missing Link® Replacement Link, 3/4" - 1013254 - 617-G33534F1
Forged Steel - Quenched and Tempered Integral rivets join the two halvesAfter making connections, rivets must be peened
Cruise 2.0 Electric Outboard, Short Shaft - 1230-00 - 207-123000 Superseded By: 207-126000F1
Includes: Integrated on-board computer with GPS and display, fuse and main switch, emergency magnetic stop, 3m cable set, battery cable bridge for lead batteries. Improved robustness and improved corrosion protectionComparable with a 5-hp gas outboardIntegrated on-board computer with GPS-based range calculation3m cable set including fuse and main switchEmergency magnetic stop keyBattery cable bridge for lead batteries
Crusader Replacement Pump - 42730-0000 - 6-427300000F1
A direct-fit, bolt-on replacement for most models of popular Crusader (Thermo Electron) gasoline V-8 engines. Direct replacement for Crusader model 97179 (Sherwood E-35). Accepts stock Crusader pulley and bolts directly to original mounting bracket.
Cummins Pump - G2903X - G2903X - 762-G2903Xf1
Impeller Kit: 29000K Minor Repair Kit: 25045
Cummins Pump - P2708X - P2708X - 762-P2708Xf1
Impeller Kit: 27000K Minor Repair Kit: 25125Major Repair Kit: 25126
Cummins/Onan A058M290 Paralleling Kit For P4500I - A058M290 - 515-A058M290F1
Paralleling kit to connect 2 compatible generators together for increased capacity.
Cummins/Onan A058U945 Paralleling Kit For P2500I - A058U945 - 515-A058U945F1
Paralleling kit to connect 2 compatible generators together for increased capacity.
Cupboard Catch W/Flush Strike - 1102Dp1Chr - 9-1102Dp1Chrf1
Chrome plated zinc.Includes box strike.
Cupboard Catch W/Offset Strik - 1102Dp2Chr - 9-1102Dp2Chrf1
Chrome plated zinc. Spacer Included to Allow for Additional (3/16") Offset
Curt 2400D25 Kasco De-Icer, 120V, 1/2 Hp, 25' Cord - 2400D025 - 353-2400D025F1
De-icers push warm bottom water to the surface creating an ice-free area of protection around your boat, dock, pier, or other in-water property. They help protect fish and aquatic species, by allowing for open areas where oxygen can enter the water. Kasco de-icers come with (2) 20 ft. suspension ropes. Use de-icers year-round for improved health and beauty of your water.Open Water Diameter varies depending on temperature and orientation (Angled or Vertical). See Kascomarine.com for additional sizing information. ETL approved to CSA and UL standards3 year limited warrantyIncludes Mooring lines for suspended operation
Curt 3400D25 Kasco De-Icer, 120V, 3/4 Hp, 25' Cord - 3400D025 - 353-3400D025F1
De-icers push warm bottom water to the surface creating an ice-free area of protection around your boat, dock, pier, or other in-water property. They help protect fish and aquatic species, by allowing for open areas where oxygen can enter the water. Kasco de-icers come with (2) 20 ft. suspension ropes. Use de-icers year-round for improved health and beauty of your water.Open Water Diameter varies depending on temperature and orientation (Angled or Vertical). See Kascomarine.com for additional sizing information. ETL approved to CSA and UL standards3 year limited warrantyIncludes Mooring lines for suspended operation
Curt 4400D25 Kasco De-Icer, 120V, 1 Hp, 25' Cord - 4400D025 - 353-4400D025F1
De-icers push warm bottom water to the surface creating an ice-free area of protection around your boat, dock, pier, or other in-water property. They help protect fish and aquatic species, by allowing for open areas where oxygen can enter the water. Kasco de-icers come with (2) 20 ft. suspension ropes. Use de-icers year-round for improved health and beauty of your water.Open Water Diameter varies depending on temperature and orientation (Angled or Vertical). See Kascomarine.com for additional sizing information. ETL approved to CSA and UL standards3 year limited warrantyIncludes Mooring lines for suspended operation
Curtain Fastenener Flange Stud - 100 - 0994000Nkl - 9-0994000Nklf1
Nickel plated brass.
Cyl Asy Trim Strb Ss<8M0108280 - 8M0132610 - 710-8M0132610F1
Cyl Asy-Trim-Port Ss<8M0108277 - 8M0118958 - 710-8M0118958F1
Cyl Asy-Trim-Port Ss<8M0108279 - 8M0132609 - 710-8M0132609F1
Cyl Asy-Trim-Stbd Ss<8M0108278 - 8M0118959 - 710-8M0118959F1
D & W Rotaire 4" Heat Outlet Vent - 3840Db - 162-3840Dbf1
The Rotaire line offers the ideal properties for increased efficiency in all heating and air conditioning applications: 360 rotation, easy installation and long term durability. The Rotaire Grille accepts all types of 4" Flex Duct.
D & W Rotaire 4" Heat Outlet Vent W/Damper - 3840Rdb - 162-3840Rdbf1
The Rotaire Register incorporates a unique worm-drive damper for increased operational efficiency. Just a quarter turn of the center knob opens or closes the vent wings smoothly. In the fully open position the vent wings are completely retracted allowing 100% unrestricted air-flow.
D-Ring Towing Alu-Rib - 8M0168447 - 720-8M0168447F1
D.C. Bay Socket W/60 Pigtail - 0024Dp2 - 9-0024Dp2F1
For lights on vessels under 20 m. Plastic body, brass spring.
D&W Saportpbtw Spray-Port™ Outlet Port Only, 3" Bright White - Sa-Port-P-Btw - 162-Saportpbtwf1
The Spray-Port™ is an auxiliary hook-up without storage. Small and simple, it measures only 4" deep and requires only a 2-3/4"round installation hole. The Spray-Port™ can also be utilized, with or without a cover, in baggage compartments and/or under the hood of large motorized RV's. For maximum versatility, place a Spray-Away™ storage unit on one side of the RV and a Spray-Port™ hook-up on the other side. High quality 3/8" polyurethane coil hose for Spray-Port™ with Brass insert to fit Spray Port Quick Connector. With pistol grip sprayer.Note: New Coil Hose (sold separately) required to connect to this product. Or a Brass-Quick Connect Adapter (sold separately) is required to attach a garden hose to this product.
D2 8-10 Single Clutch (Black) - 29101410Bk - 239-29101410F1
Variable geometry handle and unique grip pattern of dominoes that prevent rope fray. Unlike anything else on the market, Lewmar's non-cam clutch has a series of smooth, in-line and parallel rings hinged at the base. The line is run through these rings which are then tilted by a single connecting lever. When tilted, the rings force the line to snake through them, creating the necessary friction to hold the line securely. Domino Cluster and greater surface area holds line under load without fraying
Damp Away Dehumidifier, 14 Oz. - Mdr-300 - 79-Mdr300F1
Odorless. Automatically removes moisture from boat for months. Absorbs moisture from air and deposits it right into container. Place in cabins, lockers, closets, head, cabinets and other enclosed areas where moisture collects. Will absorb 250 cubic feet of moisture at 75% humidity. Lasts for months. Will not overflow. Perfect for winter lay-up.
Damp Away Dehumidifier, 32 Oz. - Mdr-304 - 79-Mdr304F1
Odorless. Automatically removes moisture from boat for months. Absorbs moisture from air and deposits it right into container. Place in cabins, lockers, closets, head, cabinets and other enclosed areas where moisture collects. Will absorb 250 cubic feet of moisture at 75% humidity. Lasts for months. Will not overflow. Perfect for winter lay-up.
Damp Away Ii Dehumidifier, 20 Oz. - Mdr-306 - 79-Mdr306F1
Effectively helps eliminate mold and mildew by removing excessive moisture. Odorless, non-corrosive, with no harsh chemicals emitted. Individually sealed cloth bags (3" x 8").
Damp Rid Fg01Ffesb Refillable Moisture Absorber, 12 Oz. - Fg01Ffesb - 689-Fg01Ffesbf1
Eliminates excess moisture from the air that can cause moldy, musty odors for up to 45 days. FG01 features a sturdy container and insert sleeve that can be refilled time and again. Ideal for areas up to 250 sq. ft. FG30 Refill bag is an economical, easy-to-pour re-closeable pouch. Refills FG01 4 times.Ideal for : Bathrooms/Laundry RoomsClosets/Cabinets & Storage SpacesStored Boats/RVs/Classic Cars
Damp Rid Mold & Mildew Stain Remover, 32 Oz. - Fg502 - 689-Fg502F1
Mold & Mildew is twice as strong as the leading product. For use on both interior and exterior surfaces, it cleans without scrubbing. Ok to use on wood, plastic, fiberglass, vinyl, concrete, brick, tile, grout, garbage cans and outdoor furniture. When used for surface preparation prior to painting, it improves the long term appearance and performance of your paint.
Damprid Fg50Ffesb High Capacity Moisture Absorber, 2 Lb Tub, Up To 1,000 Sq Ft, Fragrance Free - Fg50Ffesb - 689-Fg50Ffesbf1
Eliminates excess moisture from the air that can cause moldy, musty odors for up to 45 days. Ideal for areas up to 1,000 sq. ft. Attracts & traps excess moisture in large spacesMoisture-Lock™ technology prevents spillsLasts up to 6 monthsIdeal for: Basement, Stored Boat or Camper/RV, Storage Unit
Damprid Fg80Ffesb Fragrance Free Hanging Moisture Absorber, 14 Oz. - Fg80Ffesb - 689-Fg80Ffesbf1
Designed to hang in enclosed spaces to protect items from excess moisture that causes damage. It lasts up to 60 days depending on temperature and conditions. So effective it's patented. Perfect for allergy sufferers with fragrance sensitivity.
Damprid Fg80Fssb Fresh Scent Hanging Moisture Absorber, 14 Oz. - Fg80Fssb - 689-Fg80Fssbf1
Designed to hang in enclosed spaces to protect items from excess moisture that causes damage. It lasts up to 60 days depending on temperature and conditions. So effective it's patented. Perfect for allergy sufferers with fragrance sensitivity.
Damprid Fg83Ffesb Hanging Moisture Absorber, Fragrance Free, 15.4 Oz. 3/Pk - Fg83Ffesb - 689-Fg83Ffesbf1
Hangs in small enclosed spaces to protect items/fabrics from excess moisture that causes moisture damage and mold and mildew stains for up to 60 days. It eliminates musty odors and reduces allergens caused by moisture to turn stagnant air into fresher, healthier air. It is non-toxic, septic safe, and friendly to the environment. Protects clothing and personal items from moisture damage and musty odorsTime-release fragrance technology continuously releases a pleasant fragrancePerfect for: Closet - Laundry Room - Gym Locker10% MORE moisture absorbing powerEach bag lasts up to 60 days
Damprid Fg83Fssb Hanging Moisture Absorber, Fresh Scent, 15.4 Oz. 3/Pk - Fg83Fssb - 689-Fg83Fssbf1
Hangs in small enclosed spaces to protect items/fabrics from excess moisture that causes moisture damage and mold and mildew stains for up to 60 days. It eliminates musty odors and reduces allergens caused by moisture to turn stagnant air into fresher, healthier air. It is non-toxic, septic safe, and friendly to the environment. Protects clothing and personal items from moisture damage and musty odorsTime-release fragrance technology continuously releases a pleasant fragrancePerfect for: Closet - Laundry Room - Gym Locker10% MORE moisture absorbing powerEach bag lasts up to 60 days
Danforth 3/8X6 Ss Chn W/Shackl - 95226 - 241-95226F1
Package 316 stainless chain with shackle.
Davis 125 Navigation Rules Quick Reference Card - 125 - 166-125F1
Has the new U.S. Buoyage System, inland and international rules, right of way, lights, sound signals, new bridge signals, graphically summarized and easy to read.
Davis 126 Coastwise Piloting Quick Reference Card - 126 - 166-126F1
Puts all the piloting information you need at your fingertips. Includes dead reckoning basics, true, magnetic and compass relationships, position finding, estimating distances off, current and leeway corrections. Has time, distance and speed calculator, relative bearing gauge for distance off calculations and common chart symbols.
Davis 1260 Wind-Tels (2/Pk) - 1260 - 166-1260F1
Utilizes port and starboard colored plastic vanes. Ideal for saltwater sailing. The shroud mounting prevents sliding or fouling. Effective at any heel angle even in the lightest winds. Durable. Marine grade metal parts. Fits all shroud sizes.
Davis 127 International Nav Rules Quick Reference Card - 127 - 166-127F1
A comprehensive guide incorporating the International Maritime Buoyage System and COLREGS. Clarifies differences between Cardinal and Lateral buoyage systems and regions, key to reducing confusion and danger when entering unfamiliar waters or busy harbors.
Davis 128 Boating Guide Quick Reference Card - 128 - 166-128F1
Covers all the basic procedures and equipment. Includes predeparture checklist, recommended equipment & spare parts, fueling procedures, engine troubleshooting, radio use, trailering, launching, anchoring, knot tying, water-skiing hand signals. Gives rules of the U.S. Buoyage System and right-of-way. Helps in emergencies by covering distress signals, fire procedures, towing, weather warnings, and first aid (Hypothermia & CPR).
Davis 1295 Black Max Wind Direction Indicator - 1295 - 166-1295F1
Attaches quickly to masts and booms on most small boats such as Lasers and Sunfish. The tough, high impact plastic vane is designed to withstand years of punishment and the abuse of small boat sailing. Includes protective storage tube. Vane is 8".
Davis 1310 Spar-Fly - 1310 - 166-1310F1
Combines needle bearing balance, high impact plastic and marine grade metals for unsurpassed sensitivity and durability. Unaffected by heel angle. Comes equipped with both a top mount and fitting. V-shaped silhouette and bright red color for easy visibility.
Davis 1458 Air-Dryr 1000 For Mold, Mildew And Moisture - 1458 - 166-1458F1
Designed to operate anywhere, 24 hours a day. Say goodbye to mold, mildew, and moisture. Place Air-Dryr™ on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. Neutral beige color housing made of polycarbonate.
Davis 1466 Swim Stirrup - 1466 - 166-1466F1
The Swim Stirrup® has been carefully engineered to provide safe, easy access to small boats for swimmers or water skiers. Durable, reliable design attaches to gunwales, transoms, or open bows. Easy to install, easy to use-it even floats!
Davis 151 Emergency Radar Reflector - 151 - 166-151F1
Compact, lightweight and economical unit that disassembles and stows flat for storage. When needed, it pops open to 11.5" diameter and installs in seconds. Three perpendicular planes reflect radar from all directions. Made of special plastic-metal foil laminate. Resists corrosion and peeling.
Davis 152 Echomaster Radar Reflector W/Marine Grade Anodized Plates - 152 - 166-152F1
The Standard EchoMaster can be assembled around a backstay, or wire rigging. Mounting holes in corner latches make sturdy attachment points for suspending from a bridle. Non-anodized marine grade aluminum plates. Stows flat.
Davis 1705 Universal Masthead Mount For Windtrak 10 Or 15 - 1705 - 166-1705F1
Fits both 10" and 15" WindTrak models. Can be top or side mounted to extend your WindTrak vane away from masthead obstructions. The mount's 13" (33 cm) aluminum arm lets your WindTrak easily clear most masthead running lights, antennas or electronic wind speed sensors. Gives the cockpit a better viewing angle of WindTrak. Comes with two brackets and all necessary stainless steel hardware to install on most mastheads. Accommodates offset angles to ±20 degrees.
Davis 2350 Round Sail Track Stop - 2350 - 166-2350F1
Hold sails and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine grade nickel plated brass. Come with lanyard holes.
Davis 2440 Minishockle 18" Black - 2440 - 166-2440F1
Use for boating, camping, biking, motorcycle riding or anywhere you want to be sure your load is held in place solidly, securely and safely. UV resistant nylon webbing is sewn over marine grade elastomer. 316 stainless steel wire gate snaps will hold up to 300 pounds (136 kg). That's ten times the capacity of most standard bungee cords.
Davis 3101 Spare Vane Only For 3120 10" Windtrak - 3101 - 166-3101F1
Spare vane for WindTrak 10.
Davis 3120 10" Windtrak Vane For Small Boats And Dinghies - 3120 - 166-3120F1
10" WindTrak vane For Small Boats and Dinghies. Sapphire suspension bearing, 10" vane (25 cm) and adjustable tacking arms with tabs. Vane and tabs feature reflectors for high visibility day and night. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g).
Davis 3150 15" Windtrak Vane With Bird-Proof Spike - 3150 - 166-3150F1
The 15" (38.1cm) vane can be through bolted or tapped into the masthead. The mounting socket has a 5/16"©18 thread. The entire unit weighs only 3.9 ounces (111 g). Features spike above vane to keep birds off your mast. Sapphire suspension system and reflector tabs on the bottom surfaces make WindTrak 15 highly sensitive and visible even at night!
Davis 3151 Spare Vane Only For 3151 15" Windex - 3151 - 166-3151F1
Vane 15" For #3150
Davis 3180 Blacksmith Crazy Kids Wind Vane - 3180 - 166-3180F1
Bring your sailing experience to a new level - traditional wind indicators tend to be fragile and easily bent or broken. Not anymore! Davis Instruments' Optimist Pro Wind Vane is made from black fiber glass and duraluminum. Handmade Optimist wind vane for mast head mountingCarbon-free
Davis 352 Rocker Stopper, Individual Unit - 352 - 166-352F1
A hydrodynamic device designed to scientifically stabilize a moored, anchored or drifting boat. Extremely efficient at dampening the effects of waves and wake on your boat.
Davis 400 Queaz-Away Travelers' Wristbands (1 Pair/Pk) - 400 - 166-400F1
A non-drug aid to relieve unpleasant effects of rough seas, bumpy air flights or winding roads. Acupressure point design. Can be washed. One size fits all.
Davis 430 Motor Caddy Outboard Hoisting Harness Fits 4-Stroke Motors Up To 15 Hp - 430 - 166-430F1
Securely attaches to outboards providing a safe and secure handle for carrying, hoisting, and moving heavy motors. Made of tough marine grade and UV rated materials. Self-centering handle serves as an attachment point for lanyards and hoists or balanced lifting by hand.
Davis 440 Doel-Fin Stabilizer, Black (Set Of Left And Right Fins) - 440 - 166-440F1
The original hydrofoil. Molded in 2 pieces of guaranteed, unbreakable, high strength plastic. Each foil is designed to flex independently to absorb shock. Cuts fuel consumption, greater stability, consistent planing at lower RPM, faster out-of-the-hole performance, steadier turns, higher top-end speeds and lower bow rise at all speeds.
Davis 462 Lil' Fella Trolling Plate For Outboards Up To And Including 25 Hp - 462 - 166-462F1
Made of highest quality polycarbonates with stainless steel hardware.
Davis 5141 Boat Hook End Only - 5141 - 166-5141F1
Tough, strong, non corrosive polycarbonate. Universally fits all Davis Versapoles, all Team telescoping and other boat hooks including Garelick.
Davis 950 Air-Flow Tels Port And Starboard Colors (14/Pk) - 950 - 166-950F1
Lightweight. Ripstop nylon. Attaches to sails with waterproof adhesive locator discs. Red & Green. No hole required. Tels Show the air flow across sails. Kit includes 14 Tels and full instructions.
Davis Flat Sail Track Stop - 2351 - 166-2351F1
Hold sails and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine grade nickel plated brass. Come with lanyard holes.
Davis Flat Sail Track Stop - 2352 - 166-2352F1
Hold sails and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine grade nickel plated brass. Come with lanyard holes.
Davis Fsr Fiberglass Stain Remover, 16 Oz. - 790 - 166-790F1
Ideal for removing oil, rust, exhaust, waterline and transom stains. Also for shower stalls and furniture made of fiberglass. Removes road soil from trailered boats and RV's. Non-abrasive. Safe on white painted surfaces as well as gel coat. Requires no sanding or compounding. Just apply, wait a few minutes and rinse.
Davis Fsr Fiberglass Stain Remover, 67.8 Oz. - 792 - 166-792F1
Ideal for removing oil, rust, exhaust, waterline and transom stains. Also for shower stalls and furniture made of fiberglass. Removes road soil from trailered boats and RV's. Non-abrasive. Safe on white painted surfaces as well as gel coat. Requires no sanding or compounding. Just apply, wait a few minutes and rinse.
Davis Instruments 1459 Model Air Dryr 500 Dryer Mold Mildew & Moisture Remover - 1459 - 166-1459F1
Designed to operate anywhere, 24 hours a day. Say goodbye to mold, mildew, and moisture. Place Air-Dryr™ on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. Neutral beige color housing made of polycarbonate.
Davis J-Base Versatile Mount - 3155 - 166-3155F1
Allows for side, top or front mounting on most masts, on big boats or dinghies alike. J-Base is made of glass filled polycarbonate, 2" (5 cm) long. Includes stainless steel set screw and (2) #10 self-tapping screws.
Davis Minishockle™, 12" Black - 2430 - 166-2430F1
Take MiniShockles boating, camping, biking, motorcycle riding, anywhere you want to be sure your load is held in place solidly, securely and safely. UV resistant nylon webbing is sewn over marine grade elastomer. 316 stainless steel wire gate snaps will hold up to 300 pounds (136 kg). That's ten times the capacity of most standard bungee cords.
Davis Minishockle™, 24" Black - 2445 - 166-2445F1
Take MiniShockles boating, camping, biking, motorcycle riding, anywhere you want to be sure your load is held in place solidly, securely and safely. UV resistant nylon webbing is sewn over marine grade elastomer. 316 stainless steel wire gate snaps will hold up to 300 pounds (136 kg). That's ten times the capacity of most standard bungee cords.
Davis Rudder Position Indicator - 385 - 166-385F1
Awareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other 'close call' situation. Davis' Rudder Position Indicator gives instant visual reference of rudder angle.The pointer swings a full 30° with each revolution of the wheel. Mounts directly to your hub (approximately 2" (5 cm) in diameter) with a self-adhesive pad. Rugged, hermetically sealed, weatherproof, and sunproof housing ensures long life. No cables, adjustments, or electricity required; gravity power makes it simple and service-free. Suitable for boats with mechanical and single station hydraulic steering systems.
Davit Mrk 270 Pmg - Rbd100G-Genesis270 - 957-Rbd100Genesis270F1
Dc Label Kit W/60 Labels - 8214-Bss - 661-8214F1
Tough, weatherproof Lexan material. Features 60 common DC labels. Used on all Contura waterproof breaker and fuse panels and ST blade fuse blocks. Black.
Deck Plate Key - 1247Dp0Blk - 9-1247Dp0Blkf1
Black plastic. Fits Perko 1-1/4" and 1-1/2" deck plates and many other "Slot" type opening deck plates 1-1/8" center-to-center of lugs, 1" spade length.
Deckhand 25 - 1810125 - 27-1810125F1
Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included. DH-25: Pre spooled with 60' of 800 lb test nylon rope. Includes remote mountable anchor davit. Consistent hole pattern with older DeckHand models.
Deckhand 25 W/Corded Remote - 1810126 - 27-1810126F1
Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included. Pre spooled with 60' of 800 lb test nylon rope. Includes remote mountable anchor davit and 12' corded remote control.
Deckhand 40 - 1810140 - 27-1810140F1
Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included. Pre spooled with 100' of 800 lb test rope. Universal davit can be mounted at base or in remote position. Stows anchor horizontally to eliminate anchor swing.
Deckhand 40 Remote Switch - 1810150 - 27-1810150F1
Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. (Anchor not included). DH-25: Pre spooled with 60' of 800 lb test nylon rope. Includes remote mountable anchor davit. Consistent hole pattern with older DeckHand models.DH-40: Pre spooled with 100' of 800 lb test rope. Universal davit can be mounted at base or in remote position. Stows anchor horizontally to eliminate anchor swing
Deckhand Pontoon - 1810141 - 27-1810141F1
Automatically raise or lower your anchor. 12 volt operation. Special anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included. Includes: Standard DH 40 anchor winch (20-40 lb anchor capacity), MKA 16 quick release bracket, DH-40 corded remote and MKR12 quick connect plug.
Delo 400 Sae 40 Gal@3 - 235120339 - 463-235120339F1
Delta™ Heavy-Duty Glass Scraper - 13000 - 292-13000F1
Features a bio-engineered shape that fits the fist for better grip and precise control. Blade is held at a 5° offset angle to get under paint for improved scraping.
Deltatm Heavy-Duty Glass Scraper - 13050 - 292-13050F1
Features a bio-engineered shape that fits the fist for better grip and precise control. Blade is held at a 5° offset angle to get under paint for improved scraping.
Deluxe Rc Ac Rooftop White/R32 Ge Air Conditioner - Grcs13Xahw - 976-Grcs13Xahwf1
Deluxe Trident Straight Rod Holder Cluster - F31-0780Bxy-1 - 236-F310780Bxy1F1
Be prepared to increase your catch, turn one rod holder into three and keep your kite lines close-at-hand. The TACO Marine Deluxe Trident Rod Holder Straight with Tool Caddy makes controlling your kite lines easy, compact and organized Three offset flared rod holdersIdeal for kite fishingFits in any standard gunnel mount rod holderDetachable tackle tray designed to conveniently hold fishing gearPre-drilled holes for knife & pliers, rigs, lures, spoons, etc.Round gimbal pin construction to fit today's custom rods9-3/4" length rod holders to accomodate bigger and heavier rods & reels
Demco 6271 Air Force One Second Car Kit - 6271 - 897-6271F1
Used for setting up a 2nd car to tow or if your coach already has the Air Force One braking system installed.
Demco 6342 12V Power Outlet - 6342 - 798-6342F1
Additional accessories to achieve optimal performance for your motorhome and towed vehicles.
Demco 8550052 Recon 21K Slider 5Th Wheel Hitch - 8550052 - 798-8550052F1
Latch handle built in - No additional levers or rods needed to hook or unhook Fits Industry Standard Rails (ISR)14" of rearward travelUtilizing an aerodynamic standard 5th wheel headLighter weight, two-piece design for easy install and removal in and out of your truckWrap around jaw with lock bar for a stronger, more secure, safer towing experienceDual articulation head for easy hookup and release on uneven terrain3 height adjustments from 16-7/8", 18-1/8", and 19-3/8" for level towing21,000 lb. towing capacityMade in the USA
Demco 9599006 Stay-In-Play Duo Towed Vehicle Braking System - 9599006 - 897-9599006F1
Inertia-base towed-vehicle brake system. Simple to control, easier to use, and the smallest actuator in the industry. Duo's small operating unit is installed under the hood so you never know it is there. Duo uses the power and speed of air pressure to activate your towed vehicle brake pedal while creating vacuum for the power brake system. These two features combine to create the only progressive and proportionate vacuum assisted system with total control. Duo requires BOTH deceleration AND coach brake lights to apply the towed vehicle brakes. By combining two separate signals the need for complicated electronics is eliminated, which provides you a more reliable, long lasting system.
Demco 9599007 Air Force One Towed Vehicle Braking System - 9599007 - 897-9599007F1
Air Force One uses a pilot signal from the coach's air brake system to deliver 100%, direct proportional braking. The system is composed of three main components: the Operating Unit, the Actuator and the Coach Air Assembly. The Air Force One Operating Unit mounts under the hood of the towed vehicle, completely out of sight. It houses the vacuum generator for the towed's power assist and also the reserve air supply for the breakaway circuit. The brake actuator is compact, mounting on the brake arm of the towed vehicle and securing to the firewall with just one self-drilling screw. Once installed, the entire system is invisible and always ready for towing with no set up or take down. Air Force One fits all towed vehicle makes and models.
Demco Xxx Recon Gooseneck 5Th Wheel Hitch - 8550045 - 798-8550045F1
The Recon Gooseneck Ball Mount is a light weight geometric design that fits any 2-5/16" Gooseneck Ball Mount. The hitch can be easily separated into 2 pieces making installation and removal quick and easy. The Recon utilizes a standard 5th wheel head design, no adapter plate, or pin box modifications are needed. Made in the USA. Latch handle built in - No Additional levers or rods needed to hook or unhookWrap around jaw with lock bar for stronger, more secure, safer towing experienceDual articulation head for easy hookup and release on uneven terrain3 height adjustments 15-1/2" to 18" Do Not Use a Wedge. Do not prevent the kingpin from rotating within jaws of the Recon Goose Ball Coupler with a wedge or other device.
Deros Electric Random Orbital Sander - Mid55020Caus - 465-Mid55020Causf1
The first random orbital electric sander using advanced brushless DC motor technology, without the need for an external power transformer. Performance unequalled by any competitive electric tool can now be found within reach of any standard 110 volt outlet.The ergonomic, symmetrical design with palm lever throttle offers comfortable use in either hand, for sanding speeds between 4,000 and 10,000 rpm. DEROS provides improved vacuum performance when dust-free sanding and has an industry-leading 2+1 year warranty. Has a soft start function and a built-in electronic motor brakeFeatures an easy to use lever to control motor speed, similar to the throttle on pneumatic sandersDigital speed control can be selected in 1,000 rpm incrementsErgonomically designed with a longer handle that provides extra supportTwice the power of competitive electric tools but is almost half the sizeSoft seal between the sander and backing pad for improved vacuum performance when dust-free sandingUses specially designed vacuum backing pads for optimal performance with Mirka net abrasives
Deros Electric Random Orbital Sander - Mid65020Caus - 465-Mid65020Causf1
The first random orbital electric sander using advanced brushless DC motor technology, without the need for an external power transformer. Performance unequalled by any competitive electric tool can now be found within reach of any standard 110 volt outlet.The ergonomic, symmetrical design with palm lever throttle offers comfortable use in either hand, for sanding speeds between 4,000 and 10,000 rpm. DEROS provides improved vacuum performance when dust-free sanding and has an industry-leading 2+1 year warranty. Has a soft start function and a built-in electronic motor brakeFeatures an easy to use lever to control motor speed, similar to the throttle on pneumatic sandersDigital speed control can be selected in 1,000 rpm incrementsErgonomically designed with a longer handle that provides extra supportTwice the power of competitive electric tools but is almost half the sizeSoft seal between the sander and backing pad for improved vacuum performance when dust-free sandingUses specially designed vacuum backing pads for optimal performance with Mirka net abrasives
Detent Assembly Ss<865711A02 - 8M0157700 - 710-8M0157700F1
Deutsch Plug Kit 5/Pk - 15107-001 - 622-15107001F1
Used on Lenco actuators and extension harnesses.Comes in a package of 5.
Deutsch Receptacle Kit 5/Pk - 15107-002 - 622-15107002F1
Used on Lenco actuators and extension harnesses.Comes in a package of 5.
Dexcool 5050Premix Gal @ 6 - 9407006021 - 258-9407006021F1
A single-phase, Ethylene Glycol based, extended life, universal engine coolant based on a unique extended life carboxylate inhibitor system. In heavy-duty applications not requiring nitrite, DEX-COOL is suitable for service life of 400,000 miles or 8,000 hours.Sold in case packs only.
Dexcool Concentrate Gal @ 6/Ca - 9404006021 - 258-9404006021F1
A single-phase, Ethylene Glycol based, extended life, universal engine coolant based on a unique extended life carboxylate inhibitor system. In heavy-duty applications not requiring nitrite, DEX-COOL is suitable for service life of 400,000 miles or 8,000 hours.Sold in case packs only.
Dexter K71G0102 Drum Brakes - K71-G01-02 - 641-K71G0102F1
Dexter® free backing drum brakes are designed to withstand a marine environment.The Galv-X system is composed of inorganic polymers which bond metallic zinc flakes to the metal surface.Kit includes aluminum wheel cylinder, stainless steel spring, brake pads that are bonded and riveted with bronze rivets to backing plate and backing. These are enough parts to do one axle.Drum replacement parts kit includes: springs, adjuster tool, brass hardware, and hardware for the backing plate.
Dexter K71G0107 Drum Brakes - K71-G01-07 - 641-K71G0107F1
Dexter® free backing drum brakes are designed to withstand a marine environment.The E-Coat drums are painted.Kit includes aluminum wheel cylinder, stainless steel spring, brake pads that are bonded and riveted with bronze rivets to backing plate and backing. These are enough parts to do one axle.Drum replacement parts kit includes: springs, adjuster tool, brass hardware, and hardware for the backing plate.
Dexter K71G0157 Radius End Slipper Springs - K71-G01-57 - 641-K71G0157F1
Arch Length 23-1/2" L.Heavy-duty. Includes 9/16" ID nylon bushings.
Dexter K71G0165 Leaf Spring Equalizer - K71-G01-65 - 641-K71G0165F1
Cast equalizer is manufactured from ductile iron to industry standards. Black paint finish.
Dexter Slipper Spring Axle Hanger Kit - 86529 - 641-86529 Superseded By: 641-K71G0302F1
Includes all parts needed to mount to frame. Kit includes:(4) shackle bolts and nuts, zinc plated, (4) hangers, raw unfinished steel.
Dexter® 10" Drum Brake Assembly, 3.5K Nev-R-Adjust®, Lh - K23-468-00 - 645-K2346800F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 10" Drum Brake Assembly, 3.5K Nev-R-Adjust®, Rh - K23-469-00 - 645-K2346900F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 10" Drum Brake Assembly, 3.5K, Lh - K23-026-00 - 645-K2302600F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 10" Drum Brake Assembly, 3.5K, Rh - K23-027-00 - 645-K2302700F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 10" Drum Brake Assembly, 4.4K Nev-R-Adjust®, Lh - K23-478-00 - 645-K2347800F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 10" Drum Brake Assembly, 4.4K Nev-R-Adjust®, Rh - K23-479-00 - 645-K2347900F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 6K Nev-R-Adjust®, Lh - K23-458-00 - 645-K2345800F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 6K Nev-R-Adjust®, Rh - K23-459-00 - 645-K2345900F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 6K, Lh - K23-105-00 - 645-K2310500F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 6K, Rh - K23-106-00 - 645-K2310600F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 7K Nev-R-Adjust®, Lh - K23-464-00 - 645-K2346400F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 7K Nev-R-Adjust®, Rh - K23-465-00 - 645-K2346500F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 7K, Lh - K23-180-00 - 645-K2318000F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 12" Drum Brake Assembly, 7K, Rh - K23-181-00 - 645-K2318100F1
Complete 12" x 2" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® 44550 - Universal Plate - 44550 - 641-44550F1
Fits 1.90", 2" and 2-3/8" axle/u-bolt patterns. Hot dip galvanized for lasting protection.
Dexter® 46304A Caliper Assembly - 46304A - 641-46304Af1
Caliper Assembly
Dexter® 86536 Tie Plate - 641-86536 - 641-86536 Superseded By: 641-K71G0167F1
Axle Tie Plate. Size: 3.75" x 4" x .25". Fits 2-3/8" Round Axles.
Dexter® 86537 Tie Plate - 86537 - 641-86537 Superseded By: 641-K71G0168F1
Axle Tie Plate. Size: 5.875 x 3.75" x .25". Fits 3" Round Axles.
Dexter® Axle Plate 2500# - 44557 - 641-44557F1
Axle Plate 2500#
Dexter® Axle Tie Plate Kit - 81175 - 641-81175 Superseded By: 641-K71G0152F1
Galvanized kits contain 4 U-bolts, 2 tie plates, 8 lock washers and 8 nuts.
Dexter® Axle Tie Plate Kit - 81180 - 641-81180 Superseded By: 641-K71G0153F1
Galvanized kits contain 4 U-bolts, 2 tie plates, 8 lock washers and 8 nuts.
Dexter® Axle Tie Plate Kit - 86522 - 641-86522 Superseded By: 641-K71G0218F1
Zinc kits contain 4 U-bolts, 2 tie plates and 8 lock nuts.
Dexter® Axle Tie Plate Kit - 86523 - 641-86523 Superseded By: 641-K71G0220F1
Zinc kits contain 4 U-bolts, 2 tie plates and 8 lock nuts.
Dexter® Axle Tie Plate Kit - 86524 - 641-86524 Superseded By: 641-K71G0219F1
Zinc kits contain 4 U-bolts, 2 tie plates and 8 lock nuts.
Dexter® Axle Tie Plate Kit - 86525 - 641-86525 Superseded By: 641-K71G0217F1
Zinc kits contain 4 U-bolts, 2 tie plates and 8 lock nuts.
Dexter® Axle Tie Plate Kit - 86526 - 641-86526 Superseded By: 641-K71G0228F1
Zinc kits contain 4 U-bolts, 2 tie plates and 8 lock nuts.
Dexter® Complete 10" Drum Brake Installation Kit, 5 Studs - 82407 - 641-82407 Superseded By: 641-K71G0045F1
Complete hydraulic free backing drum brake kit has everything needed for a single axle 5-stud wheel trailer, both left and right assemblies. Model 660/800 drum brake actuator features a cast ball clamp, Drop N Go auto coupler latch, actuator features cast ball clamp, and an oversized master cylinder. Includes pair of GalvX coated drum brakes and painted drum hubs, drum brake actuator and brake line kit. Fits 13", 14" and 15" wheels.DOT 3 brake fluid not included.
Dexter® Complete 12" Drum Brake Installation Kit, 6 Studs - 82408 - 641-82408 Superseded By: 641-K71G0024F1
Complete hydraulic free backing drum brake kit has everything needed for a single axle 5-stud wheel trailer, both left and right assemblies. Model 660/800 drum brake actuator features a cast ball clamp, Drop N Go auto coupler latch, actuator features cast ball clamp, and an oversized master cylinder. Includes pair of GalvX coated drum brakes and painted drum hubs, drum brake actuator and brake line kit. Fits 13", 14" and 15" wheels.DOT 3 brake fluid not included.
Dexter® Dust Caps 1.98" - Sold As Pair - 81167 - 641-81167 Superseded By: 641-K7131404F1
Dust Caps, 1.98", Pair
Dexter® E-Z Lube® Plug, 2Ea. - K71-320-00 - 645-K7132000F1
Fits Dexter® E-Z Lube® grease caps.
Dexter® Fill Cap - 48759 - 641-48759F1
Fits discontinued brake actuator models 70LP and 80LP (disc/drum).
Dexter® Galvanized Universal Tie Plates - Sold As Pair - 81186 - 641-81186 Superseded By: 641-K71G0155F1
Fits 1.90", 2" and 2-3/8" axle/u-bolt patterns. Hot dip galvanized for lasting protection.
Dexter® K2346200 10" Drum Brake Assembly, 4.4K, Lh (After 5/1/09) - K23-462-00 - 645-K2346200F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® K2346300 10" Drum Brake Assembly, 4.4K, Rh (After 5/1/09) - K23-463-00 - 645-K2346300F1
Complete 10" x 2-1/4" electric brake assembly. Includes brake, nuts, plugs and instructions.
Dexter® K71-2H-10-Ddd - Disc Brake Kit 1 Axl 3.5K-3.7K - K71-2H-10-Ddd - 641-K712H10Dddf1
Dexter® K71-2R-10-Ddd - Disc Brake Kit 1 Axl 3.5K-4.2K - K71-2R-10-Ddd - 641-K712R10Dddf1
Dexter® K71-Dbc-250-D - 7K-8K Caliper Kit Kodiak Dex-Cote - K71-Dbc-250-D - 641-K71Dbc250Df1
Dexter® K71-Dbc-250-Ss - 7K-8K Caliper Kit Kodiak Ss - K71-Dbc-250-Ss - 641-K71Dbc250Ssf1
Dexter® K71-G00-31 - Brake Kit 10 Vent Disc/66 Actuator - K71-G00-31 - 641-K71G0031F1
Kit comes with everything needed to add brakes to a trailer.Includes: 6600 lb. disc brake actuator, back up solenoid, two eliminator 10" vented disc brakes and a single axle brake line kit.Kit Includes a pair of GalvX coated vented rotor disc brakes, disc brake actuator and a brake line kit, brake hoses, brass fittings & attachment hardware (Brake fluid not included) Fits 13", 14" and 15" wheels.
Dexter® K71-G00-37 - Brake Kit 12 Vent Disc/80 Actuator - K71-G00-37 - 641-K71G0037F1
Kit comes with everything needed to add brakes to a trailer.Includes: 6600 lb. disc brake actuator, back up solenoid, two eliminator 10" vented disc brakes and a single axle brake line kit.Kit Includes a pair of GalvX coated vented rotor disc brakes, disc brake actuator and a brake line kit, brake hoses, brass fittings & attachment hardware (Brake fluid not included) Fits 13", 14" and 15" wheels.
Dexter® K71-G01-04 - Electric Drum Brakes 10 Inch Pair - K71-G01-04 - 641-K71G0104F1
Electric brakes offer braking in forward and reverse. Features water resistant connections, rubber molded plugs, and quick switch electrical connections for fast and easy installation. Sold in pairs left and right. Mounting nuts and bolts included.
Dexter® K71-G01-05 - Electric Drum Brakes 12 Inch Pair - K71-G01-05 - 641-K71G0105F1
Electric brakes offer braking in forward and reverse. Features water resistant connections, rubber molded plugs, and quick switch electrical connections for fast and easy installation. Sold in pairs left and right. Mounting nuts and bolts included.
Dexter® K71-G01-06 - 10 Inch Drum Brake Kit E-Coated - K71-G01-06 - 641-K71G0106F1
Dexter® free backing drum brakes are designed to withstand a marine environment.The E-Coat drums are painted.Kit includes aluminum wheel cylinder, stainless steel spring, brake pads that are bonded and riveted with bronze rivets to backing plate and backing. These are enough parts to do one axle.Drum replacement parts kit includes: springs, adjuster tool, brass hardware, and hardware for the backing plate.
Dexter® K71-G01-52 - Axle Tie Plate Kit 1.9In Dia - K71-G01-52 - 641-K71G0152F1
Galvanized kits contain 4 U-bolts, 2 tie plates, 8 lock washers and 8 nuts.
Dexter® K71-G01-53 - Axle Tie Plate Kit 2-3/8In Dia - K71-G01-53 - 641-K71G0153F1
Galvanized kits contain 4 U-bolts, 2 tie plates, 8 lock washers and 8 nuts.
Dexter® K71-G01-54 - Axle Tie Plate Kit 2In Sq - K71-G01-54 - 641-K71G0154F1
Galvanized kits contain 4 U-bolts, 2 tie plates, 8 lock washers and 8 nuts.
Dexter® K71-G01-55 - Universal Tie Plate 2/Pk - K71-G01-55 - 641-K71G0155F1
Fits 1.90", 2" and 2-3/8" axle/u-bolt patterns. Hot dip galvanized for lasting protection.
Dexter® K71-G01-58 - Slipper Spring 1000# Cap. - K71-G01-58 - 641-K71G0158F1
Arch Length 23-1/2" L.Heavy-duty. Includes 9/16" ID nylon bushings.
Dexter® K71-G01-60 - Slipper Spring Flat 1850# Cap. - K71-G01-60 - 641-K71G0160F1
Arch Length, 28".Heavy-duty. Includes 9/16" ID nylon bushings.
Dexter® K71-G01-61 - Dbl. Eye Spring 2500# Cap. - K71-G01-61 - 641-K71G0161F1
Double eye springs, 2500# capacity (per spring), 4 leaves. 25-1/4" L x 3" H. Includes 9/16" ID nylon bushings. Packed 2 springs per box.
Dexter® K71-G02-06 - Axle Kit 2.5K 1.75 Rd - K71-G02-06 - 641-K71G0206F1
Single axle kits include axle tie plate kits, 1-3/4" x 25-1/4" double eye leaf springs, front and rear spring hangers, shackle links and all necessary hardware to install axle. Welding of spring hangers to trailer frame will be required.
Dexter® K71-G02-07 - Axle Kit 3.5K 2-3/8 Rd - K71-G02-07 - 641-K71G0207F1
Single axle kits include axle tie plate kits, 1-3/4" x 25-1/4" double eye leaf springs, front and rear spring hangers, shackle links and all necessary hardware to install axle. Welding of spring hangers to trailer frame will be required.
Dexter® K71-G02-20 - Axle Tie Plate Kit 2.38 Rd Tub - K71-G02-20 - 641-K71G0220F1
Zinc kits contain 4 U-bolts, 2 tie plates and 8 lock nuts.
Dexter® K71-G03-06 - Axle Hanger Kit Tandem - K71-G03-06 - 641-K71G0306F1
Complete tandem axle hanger kit for use with two axles. For use with 1-3/4" double eye springs. Kit Includes: (14) shackle bolts and nuts, zinc plated, (2) equalizers, painted, (6) hangers, raw unfinished steel, (8) shackle links, zinc plated.
Dexter® Leaf Spring Equalizer - 86533 - 641-86533 Superseded By: 641-K71G0165F1
Cast equalizer is manufactured from ductile iron to industry standards. Black paint finish.
Dexter® Single Axle Hanger Kit For Use With 1-3/4" Double Eye Springs - 86520 - 641-86520 Superseded By: 641-K71G0299F1
Complete axle hanger kit for one axle. For use with 1-3/4" double eye springs. Kit includes:(6) shackle bolts and nuts, (2) front hangers, (2) rear hangers, (4) shackle links.
Dexter® Single Axle Hanger Kit For Use With 1-3/4" Double Eye Springs - 86530 - 641-86530 Superseded By: 641-K71G0300F1
Complete axle hanger kit for one axle. For use with 1-3/4" double eye springs. Kit includes:(6) shackle bolts and nuts, (2) front hangers, (2) rear hangers, (4) shackle links.
Dexter® Tandem Axle Hanger Kit For Use With 1-3/4" Double Eye Springs On Two Axles - 86521 - 641-86521 Superseded By: 641-K71G0306F1
Complete tandem axle hanger kit for use with two axles. For use with 1-3/4" double eye springs. Kit Includes: (14) shackle bolts and nuts, zinc plated, (2) equalizers, painted, (6) hangers, raw unfinished steel, (8) shackle links, zinc plated.
Dexter® Tie Plate - 86535 - 641-86535F1
Axle Tie Plate. Size: 3.44" x 3.75" x .25". Fits 1-3/4" Axles.
Dfi 2-Cyc @3 4Ltr/Gal Canada Ss<92-858037Qc1 - - 710-92-8M0230195F1
Diaphragm Kit-O/B - 5137 - 710-1399-5137F1
For Mercury and Mariner outboards.
Diaphragm Kit-Yam 3Hp6Hp8Hp 3Hp '88-02,6Hp '86-00, 8Hp '84 - 18-7367 - 47-7367F1
Dickinson 01041 12V Boxer Fan - 01-041 - 163-01041F1
12V Boxer Fan
Dickinson 01042H Fan Assembly - 01-042H - 163-01042Hf1
Fan Assembly
Dickinson 02014 Thermocouple - 02-014 - 163-02014F1
Thermocouple
Dickinson 03060 6" Burner Superheater Only - 03-060 - 163-03060F1
6" Burner Superheater Only
Dickinson 03090 6" Burner Low Sulfur Diesel Baffle - 03-090 - 163-03090F1
6" Burner Low Sulfur Diesel Baffle
Dickinson 05050 4" X 6" Window Mica For Older Units - 05-050 - 163-05050F1
4" x 6" Window Mica for older units
Dickinson 10400 Base/Burner Assy & Old Heater Upgrade - 10400 - 163-10400F1
Base/Burner Assembly Replacement & Old Heater Upgrade
Dickinson 14070 Reamer Rod (Clean Out) - 14-070 - 163-14070F1
Reamer Rod (Clean out)
Dickinson 15060 Burner, 19" - 15-060 - 163-15060F1
Burner, 19"
Dickinson 15061 Burner, 17" - 15-061 - 163-15061F1
Burner, 17"
Dickinson 15072 Orifice Assembly - 15-072 - 163-15072F1
Orifice Assembly
Dickinson 15073 Orifice Assembly - 15-073 - 163-15073F1
Orifice Assembly
Dickinson 15080 Drip Tray - 15-080 - 163-15080F1
Drip Tray
Dickinson 15101 Ignitor Assembly - 15-101 - 163-15101F1
Ignitor Assembly
Dickinson 15120 Thermometer - 15-120 - 163-15120F1
Thermometer
Dickinson 15182P Grill Section, Porcelain Coated - 15-182-P - 163-15182Pf1
Grill Section, Porcelain Coated
Dickinson 15182S Grill Section, Stainless - 15-182-S - 163-15182Sf1
Grill Section, Stainless
Dickinson 15183P Grill Section, Porcelain Coated - 15-183-P - 163-15183Pf1
Grill Section, Porcelain Coated
Dickinson 15183S Grill Section, Stainless - 15-183-S - 163-15183Sf1
Grill Section, Stainless
Dickinson 26001 Built In Bracket - 26-001 - 163-26001F1
Built in Bracket
Dickinson Antarctic Floor Mounted Diesel Heater - 00-Ant - 163-00Antf1
The Antarctic Floor Mounted Heater is ideal for boats 35' - 40'. Size of this heater produces greater heat output than the smaller heaters although fuel consumption is the same. This model is round in design and has a large viewing window. In sailboat installations, this unit must face fore or aft, if facing port or starboard is desired, the valve would need to be mounted to the side of the unit so the gravity fed valve won't starve the burner on heels up to 15°. Requires 3" diameter chimney partsMinimum 4' or maximum 8' of chimney is required, a straight run with no elbows work bestChimneys 6' or longer we highly recommend a barometric damperPermanent fresh air vent needed in area of the unitCreates a dry heat to dry out moisture inside the vesselThis model has a larger combustion chamber so more heat is produced than the Alaska and Newport heaters12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fireValve is calibrated for diesel but can be re-calibrated for kerosene or stove oil1 turn hot water coil for 5-10 gal or a 2 turn hot water coil for 15-20 gal can be installed for water heating
Dickinson Aussie Griddle Pan, 8" X 11" - 15-203 - 163-15203F1
The Aussie Griddle pan is a flat pan with small edges to keep juices in, to place on your BBQ. It is especially great for pancakes and cookies. Made of 14ga 304 Stainless Steel.
Dickinson Aussie Griddle Pan, 9-1/2" X 11" - 15-201 - 163-15201F1
The Aussie Griddle pan is a flat pan with small edges to keep juices in, to place on your BBQ. It is especially great for pancakes and cookies. Made of 14ga 304 Stainless Steel.
Dickinson Bbq Fishing Rod Holder Mt. - 15-150F - 163-15150Ff1
The Fishing Rod mount is a versatile mounting kit for your BBQ! Crafted from the most durable materials, it adapts to most fishing rod holders. Best for smaller model BBQ's. It also features the quick release latch for easy removal of your BBQ.
Dickinson Bbq Food And Drink Tray, Lg. - 15-181 - 163-15181F1
The food and drink tray is a stainless tray with plastic cutting board that clips onto the front of your Barbeque to provide a convenient tray that you can prepare food on. Made of 304 stainless steel. Fits the new style BBQ's with latch.
Dickinson Bbq Food And Drink Tray, Sm. - 15-180 - 163-15180F1
The food and drink tray is a stainless tray with plastic cutting board that clips onto the front of your Barbeque to provide a convenient tray that you can prepare food on. Made of 304 stainless steel. Fits the new style BBQ's with latch.
Dickinson Bbq Food And Drink Tray, Spitfire 180 - 15-180A - 163-15180Af1
The food and drink tray is a stainless tray with plastic cutting board that clips onto the front of your Barbeque to provide a convenient tray that you can prepare food on. Made of 304 stainless steel. Fits the new style BBQ's with latch.
Dickinson Bbq Scotty Mt. - 15-150P - 163-15150Pf1
The Scotty mount attaches to a Scotty Type Fishing Rod Holder, or instrument mount socket. The universal angle knuckle allows positioning at any angle. It fits smaller BBQ models and features a quick release latch for easy removal of your BBQ.
Dickinson Double Radex Heater - 00-Rad2 - 163-00Rad2F1
The Radex Radiator Hot Water Forced Air Heater is designed to efficiently use the waste water heat produced by a water cooled engine, or a hot water system, to generate air heat. The quality stainless steel construction minimizes maintenance and is highly resistant to corrosion. Simply connect to a circulating source of hot water and a low voltage power supply and it delivers an endless supply of temperate heat. You can also use the wasted energy from your engine's coolant to provide dry, clean cabin heat. Easy to installSide mount or frame mount availableEquipped with a single or double, independently switched high efficiency 12v fans
Dickinson Dp Exhaust Cap, 3" - 16-080 - 163-16080F1
Marine Grade 304 Stainless Steel
Dickinson Dp Exhaust Cap, 4" - 17-080 - 163-17080F1
Marine Grade 304 Stainless Steel
Dickinson Dp Exhaust Cap, 5" - 18-080 - 163-18080F1
Marine Grade 304 Stainless Steel
Dickinson Flue Guard, 3" X 22" - 16-030 - 163-16030F1
Marine Grade 304 Stainless Steel
Dickinson Flue Pipe Rain Lid, 3" - 16-200 - 163-16200F1
Marine Grade 304 Stainless Steel
Dickinson Frame Mount For Radex Single - 22-002 - 163-22002F1
Frame Mount for Radex Single
Dickinson Gimbal Mount Kit - 26-003 - 163-26003F1
The gimbaled option for the Caribbean and Mediterranean Stoves is the perfect application for rougher waters so your stove swings with the boats angle.
Dickinson H Exhaust Cap, 3" - 16-090 - 163-16090F1
Marine Grade 304 Stainless Steel
Dickinson H Exhaust Cap, 4" - 17-090 - 163-17090F1
Marine Grade 304 Stainless Steel
Dickinson H Exhaust Cap, 5" - 18-090 - 163-18090F1
Marine Grade 304 Stainless Steel
Dickinson Lofoten Floor Mounted Diesel Heater - 00-Lof - 163-00Loff1
The Lofoten Floor Mounted Heater is ideal for boats 35'-40'. Similar to the Antarctic in performance but with a larger top area, rectangular shape, and a cast-iron lid providing a top cooking surface. Requires 4" diameter chimney partsMinimum 4' or maximum 8' of chimney is required, a straight run with no elbows work bestChimneys 6' or longer we highly recommend a barometric damperPermanent fresh air vent needed in area of the unitCreates a dry heat to dry out moisture inside the vesselIncludes a small cast iron cook top for cooking etcThis model has a larger combustion chamber so it produces more heat than the Alaska and Newport heaters12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fireValve is calibrated for diesel but can be re-calibrated for kerosene or stove oil1 turn hot water coil for 5-10 gal or a 2 turn hot water coil for 15-20 gal can be installed for water heating
Dickinson Long Pipe With Barometric Damper, 3" X 24" - 16-001 - 163-16001F1
Marine Grade 304 Stainless Steel
Dickinson Long Pipe With Barometric Damper, 4" X 24" - 17-001 - 163-17001F1
Marine Grade 304 Stainless Steel
Dickinson Long Pipe With Barometric Damper, 5" X 24" - 18-001 - 163-18001F1
Marine Grade 304 Stainless Steel
Dickinson Newport Bulkhead Mount Diesel Heater - 00-New - 163-00Newf1
The Newport Bulkhead Mounted Heater is ideal for boats 30'-35'. Small, compact, and bulkhead mounted. An attractive, economical diesel burning heater, providing comfortable, dry heat. Requires 3" diameter chimney partsMinimum 4' or maximum 8' of chimney is required, a 6' straight run with no elbows work bestChimneys 6' or longer we highly recommend a barometric damperPermanent fresh air vent needed in area of the unitDecorative laser cut valve coverCreates a dry heat to dry out moisture inside the vessel12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fireValve is calibrated for diesel but can be re-calibrated for kerosene or stove oil1 turn hot water coil for 5-10 gal can be installed for water heating
Dickinson Pacific Diesel Cook Stove - 00-Pac - 163-00Pacf1
The Pacific Cook Stove is the most popular model ideal for boats 30-40'. Has an attractive appearance that will enhance the interior of any vessel. Requires 5" diameter chimney partsMinimum 6' or maximum 8' of chimney is required, a straight run with no elbows work bestChimneys 6ft or longer we highly recommend a barometric damperPermanent fresh air vent needed in area of the unitCreates a dry heat to dry out moisture inside the vesselMost popular size, will fit most stove cut outsIn sailboat installations, this unit must face fore or aft, if facing port or starboard is desired, the valve would need to be mounted to the side of the unit so the gravity fed valve won't starve the burner on heels up to 15°12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fireValve is calibrated for diesel but can be re-calibrated for kerosene or stove oil1 turn hot water coil for 5-10 gal or a 2 turn hot water coil for 15-20 gal can be installed for water heating
Dickinson Pipe, 3" X 24" - 16-000 - 163-16000F1
Marine Grade 304 Stainless Steel
Dickinson Pipe, 4" X 24" - 17-000 - 163-17000F1
Marine Grade 304 Stainless Steel
Dickinson Pipe, 5" X 24" - 18-000 - 163-18000F1
Marine Grade 304 Stainless Steel
Dickinson Short Pipe With Barometric Damper, 3" X 7" - 16-010 - 163-16010F1
Marine Grade 304 Stainless Steel
Dickinson Short Pipe With Barometric Damper, 4" X 7" - 17-010 - 163-17010F1
Marine Grade 304 Stainless Steel
Dickinson Short Pipe With Barometric Damper, 5" X 9" - 18-010 - 163-18010F1
Marine Grade 304 Stainless Steel
Dickinson Side Mount Bracket - 22-001 - 163-22001F1
Side Mount Bracket
Dickinson Single Radex Heater - 00-Rad1 - 163-00Rad1F1
The Radex Radiator Hot Water Forced Air Heater is designed to efficiently use the waste water heat produced by a water cooled engine, or a hot water system, to generate air heat. The quality stainless steel construction minimizes maintenance and is highly resistant to corrosion. Simply connect to a circulating source of hot water and a low voltage power supply and it delivers an endless supply of temperate heat. You can also use the wasted energy from your engine's coolant to provide dry, clean cabin heat. Easy to installSide mount or frame mount availableEquipped with a single or double, independently switched high efficiency 12v fans
Dickinson Spitfire 180 Bbq - 00-Spt-180 - 163-00Spt180F1
The Dickinson Spitfire180 barbecue has a sturdy construction with a fancy design. This model features side handles and a mirror finish stainless hood with a stainless front handle to allow for effortless opening and closing even when the barbecue is hot. Use with a 1 lb green disposable bottle of propane or hoses are available for larger propane tanks. The design also prevents flame outs in the windiest of conditions. Barbecue comes with deck legs, drip tray, 2 removable stainless grill sections, a spark igniter for easy lighting, a thermometer, a stainless latch to keep the hood closed while storing, and a black vinyl cover. One year warranty, three year burner warranty. Mirror finish 304 marine grade stainless lidBrushed finish 304 marine grade stainless bodySturdy construction for maximum strengthFeatures a 10,000 BTU burnerHigh strength octagonal designThermally insulated silicon side handlesRoll away hood with front handle
Diesel Conditioner W/Anti-Gel - 5432 - 77-05432F1
Prevents diesel fuel from gelling in cold temperatures. Lowers pour point by as much as 35°F. Cleans injectors and helps restore spray pattern for more efficient combustion. ULSD Approved. OK for Biodiesel fuels.
Diesel Water Zorb™ - Mdr-559 - 79-Mdr559F1
Water in a diesel fuel can sabotage diesel engines if it's not removed. Microbes need water to grow in. Water in even small amounts can promote rust, corrosion and helps form sludge which may clog injectors, screens, filters and impair performance. Absorbs its own volume of water.
Digital Hourrmeterblack & Black - 50-15271 - 50-15271F1
White plastic housing for brighter illumination3mm front sealing gasket, contoured to fill gaps in bezel allows for superior sealingIllumination on separate circuit from gauge power, reducing chance for signal interference or voltage dropOversized windings and resistors for durability
Dim Float Glasses Bk-Gr Appar Foot Glasses - 426018001Pcs - 673-426018001Pcsf1
Dim Float Glasses Bk-Smk Appar Foot Glasses - 426018002Pcs - 673-426018002Pcsf1
Direct Replacement Exhaust Riser - 200082 - 109-200082F1
Riser w/Mounting Hardware & Gasket
Direct Replacement Exhaust Riser - 200100 - 109-200100F1
4 Riser w/Mounting Hardware
Direct Replacement Exhaust Riser - 200102 - 109-200102F1
Replacement Indmar Riser
Direct Replacement Exhaust Riser - Cm206674 - 109-Cm206674F1
Exhaust Riser 6 OE# 2846689
Direct Replacement Exhaust Riser - Cm206674Jp - 109-Cm206674Jpf1
Barr Exhaust Manifold Hardware & Accessories
Direct Replacement Exhaust Riser - Cr2098126 - 109-Cr2098126F1
Crusader Cernter Riser Riser
Direct Replacement Exhaust Riser - Mc-20-864929A3 - 109-Mc20864929A3F1
Mercruiser Riser Kit
Direct Replacement Exhaust Riser - Mc2044354 - 109-Mc2044354F1
Elbow-4" CR V6-V8 MP#0992-400
Direct Replacement Exhaust Riser - Mc2098502 - 109-Mc2098502F1
Elbow-3" ID, 0 Degree V6-V8 Marine Power
Direct Replacement Exhaust Riser - Mc2098504 - 109-Mc2098504F1
Elbow-3" ID, 15 Degree V6-V8 MP 0992115
Direct Replacement Exhaust Riser - Omc20913784 - 109-Omc20913784F1
OMC/Volvo Center Riser
Direct Replacement Exhaust Riser - Vo20855384 - 109-Vo20855384F1
Volvo V8 307-350 C.I. Riser
Direct Replacement Exhaust Riser Extension - Cr2097169 - 109-Cr2097169F1
Crusader 8" Riser Extention
Direct Replacement Exhaust Riser Extension - Cr2097772 - 109-Cr2097772F1
Crusader 4" Riser Extension
Dirt Devil® Vacpan Automatic Dustpan - 8799-Bk - 587-8799Bkf1
VacPans are a great add-on to the Central Vacuum System. The VacPan provides quick clean-ups with a convenient toe-kick switch. Simply sweep dust and dry debris up to the vacuum port to be whisked away.
Disposable Gloves, 4 Pr. - 832-4 - 655-8324F1
Lightweight and seamless. Tough neoprene for excellent finger sensitivity and dexterity.
Disposable Gloves, 50 Pr. - 832-50 - 655-83250F1
Lightweight and seamless. Tough neoprene for excellent finger sensitivity and dexterity.
Dist Hsng Assy Mc#393-3736A79 Mercury 1967-1979, 80-150Hp - 18-99430 - 47-99430F1
Dl Duct Kit For 10/16K A/C Enviro Unit - 9108549923 - 348-9108549923F1
Dual-duct kit can be used either on a new or retrofit installation and allows the air conditioning to be ducted to a secondary area like a head or anywhere else you want additional cooling. Includes "Y" connector, 12.5' of 4" insulated ducting and a 4" supply grille.
Dl Duct Kit For 6K A/C Enviro Unit - 9108750550 - 348-9108750550F1
Dual-duct kit can be used either on a new or retrofit installation and allows the air conditioning to be ducted to a secondary area like a head or anywhere else you want additional cooling. Includes "Y" connector, 12.5' of 4" insulated ducting and a 4" supply grille.
Dometic 9108870600 Fan-Tastic Vent 7350 Upgrade Kit - 9108870600 - 186-9108870600F1
Upgrade any previously purchased Fan-Tastic Vent* Rain SensorPre-wired Interior Assembly with ElectronicsAuto Lift Motor - Auto Lift ArmHand Held Remote with 2 "AA" BatteriesRemote Wall Cradle
Dometic Ecd10K-Hv A/C Retroft Kit 410A, 115V - 9108732759 - 348-9108732759F1
Easy to Install, Easy to Use, Ideal for New or Retrofit Installations!These air conditioning systems can be used for new installations or to replace your existing air conditioning to provide cooling AND reverse-cycle heating. They include the unit, digital control with LED display and mounting bezel. All units have high-velocity blowers with internal motors for a more compact installation footprint. Blowers can be mounted horizontally or vertically for installation flexibility. Units are built on a stainless steel drain pan, and the pre-installed return air filter is removable for cleaning.Installation kits available separately.
Dometic Ecd16K-Hv A/C Retroft Kit 410A, 115V - 9108732755 - 348-9108732755F1
Easy to Install, Easy to Use, Ideal for New or Retrofit Installations!These air conditioning systems can be used for new installations or to replace your existing air conditioning to provide cooling AND reverse-cycle heating. They include the unit, digital control with LED display and mounting bezel. All units have high-velocity blowers with internal motors for a more compact installation footprint. Blowers can be mounted horizontally or vertically for installation flexibility. Units are built on a stainless steel drain pan, and the pre-installed return air filter is removable for cleaning.Installation kits available separately.
Dometic Ecd16K-Hv A/C Retroft Kit 410A, 230V - 9108821279 - 348-9108821279F1
Easy to Install, Easy to Use, Ideal for New or Retrofit Installations!These air conditioning systems can be used for new installations or to replace your existing air conditioning to provide cooling AND reverse-cycle heating. They include the unit, digital control with LED display and mounting bezel. All units have high-velocity blowers with internal motors for a more compact installation footprint. Blowers can be mounted horizontally or vertically for installation flexibility. Units are built on a stainless steel drain pan, and the pre-installed return air filter is removable for cleaning.Installation kits available separately.
Dometic Ecd6K-Hv A/C Retrofit Kit 410A, 115V - 9108732762 - 348-9108732762F1
Easy to Install, Easy to Use, Ideal for New or Retrofit Installations!These air conditioning systems can be used for new installations or to replace your existing air conditioning to provide cooling AND reverse-cycle heating. They include the unit, digital control with LED display and mounting bezel. All units have high-velocity blowers with internal motors for a more compact installation footprint. Blowers can be mounted horizontally or vertically for installation flexibility. Units are built on a stainless steel drain pan, and the pre-installed return air filter is removable for cleaning.Installation kits available separately.
Domore Board- Bru Domore Board Only- Bru - Zup-04717 - 990-Zup04717F1
ZUP 04717 DOMORE Multi-Sport Board Bru Takes everything you love about the YouGotThis Board and supercharges as it can be ridden more aggressively. With a compression molded construction, this board is very responsive edge to edge. The board for if you want wake surf, turn quicker, spin faster, and jump higher!
Domore Board- Classic Domore Board Only- Classic - Zup-75106 - 990-Zup75106F1
Door Button W/Spring - 1216Dp0Chr - 9-1216Dp0Chrf1
Chrome plated zinc with black plastic knob. 1216 has phosphor bronze tension spring and item 1217 comes without spring and requires a #8 oval-head pivot screw.
Door Catch - 0554Dp - 9-0554Dpf1
White plastic and chrome plated brass screws. Screw/stud is 3/4" x #8.
Door Catch 2Pc Male/Female - 559 - 9-0559F1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Door Catches (2/Card) - 0559Dp - 9-0559Dpf1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Door Stop - 1177Dp0Chr - 9-1177Dp0Chrf1
Chrome plated zinc with rubber bumper.
Dot Fast Female 100/Pak - 100401 - 32-100401F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Dot Fast Male Wscrw 100/Pak - 100402 - 32-100402F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Double Boarding Step - 91-2334 - 100-912334F1
Economical, lightweight and strong. Make boat access safe and convenient. Surpass® high-performance molded resin, white with non-skid step surface. Handrails are optionalon the 1-step and 2-step models. Handrails are included with the 3-step and 4-step models.
Double Contact Bayonet Socket - 0052Dp - 9-0052Dpf1
For discontinued lights. 11/16" OD.
Down Foot Switch, Black - 68000883 - 239-68000883F1
For use on bow as additional switch station. Controls operation with a steady touch of the foot Suitable for DC electric windlasses running on 12v or 24vSingle direction switchHinged cover to prevent accidental operationNormally open contact, 5A (12 & 24v)Ready to installMust be used with a contactor or control box
Down Foot Switch, White - 68000918 - 239-68000918F1
For use on bow as additional switch station. Controls operation with a steady touch of the foot Suitable for DC electric windlasses running on 12v or 24vSingle direction switchHinged cover to prevent accidental operationNormally open contact, 5A (12 & 24v)Ready to installMust be used with a contactor or control box
Downrigger Longarm Combo-Man - 1091 - 736-1091F1
The top of the line in Scotty manuals. Telescopes to 60". Collapses to 36" for storage with super smooth non-fouling nylon sliders. Includes 16 position swivel mount and boom mounted rod holder. More disk brake surface surface than any other downrigger made; Automatic brake; Positive locking slip clutch control. It slips when you need it and saves a lot of gear; A high speed two feet per turn spool coupled with the extra leverage extension handle makes cranking a breeze; A heavy wall 1-1/4" diameter stainless steel boom 200' of 150 lb. test, stainless steel cable, lifetime warranty certificate and downrigger fishing instruction book.
Downrigger Strongarm 30-Man. - 1085 - 736-1085F1
More disk brake surface than any downrigger made. Automatic brake: anytime you let go of the brake, the downrigger stops instantly. A positive locking slip clutch control works just like an adjustable reel drag. Low profile horizontal spool that can be operated by either hand, 200 ft of 150 lb. test, 316 stainless steel cable, positive drive counter: 0 to 999 feet, deluxe Scotty 1170 line release, mounting bracket with stainless deck hardware, locating stops, line releases, lifetime warranty certificate, and downrigger fishing instruction book.Part # 1080DPR: Strongarm 24" x 1" SS boom. Has more outstanding features for the small and intermediate size boat than units selling for twice the price. The high speed two feet per turn spool coupled with the extra leverage extension handle makes cranking a breeze. Tilts up and locks in the vertical position for easy maneuvering around docks. Extra wide pulley wheel allows stoppers to pass through for easy double stacking. Compact No. 1023 tilt mount included along with the Scotty Lifetime warranty. Boom mount rod holder included.Part # 1085: Strongarm 30" x 1-1/4" SS boom. All the features of the No. 1080 plus a 30" heavy wall polished stainless steel arm. Easily handles as much weight as you are willing to crank. Excellent for the intermediate size boat. Includes 200' of 150 lb. test, 316 stainless steel cable, lifetime warranty and boom mount rod holder.
Downrigger Weight Hooks - 1147 - 736-1147F1
Provides a hook on the downrigger boom for storage and transport of downrigger weights.
Dp Tiller Cable - 51815 - 241-51815F1
Clear vinyl coated tested to 1000 pound tensile strength. 7 x 7, 3/16" O.D., 3/32" Dia.
Drain Kit-Aluminum 1" - 020848-001 - 114-020848001F1
Designed for aluminum boats as a 1" drain for transom, livewell or baitwell. Easily flanged, fitting eliminates need for welding. An O-ring forms a watertight seal in .40" to .090" wall thickness.
Drain Plug - 18781 - 50-18781F1
Screw type drain plug features an "O" ring for positive sealing. Fine threads maintain sealing under high vibration conditions. Mounts in a 1" diameter hole and mounts with two #8 screws. Mounting flange: 1-1/2" x 2". Ideal for boat transoms, fish wells, ice chests. Plug is attached.
Drain Plug (All Boats)(All Boa Pmg - - 937-B0300411F1
Drain Plug Omc-Vp#3854539 Omc Cobra Sx & Volvo Sx Drives - 18-2454 - 47-2454F1
Drain Plug- 1 Twist-Ss - 18891 - 50-18891F1
Rugged construction for durability. Mount from inside transom. Bulk items come in reusable bucket. Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. Snap-Lock Plugs: Cam-action provides easy installation. Will not jar loose.
Drain Plug-1 Twist-Brass - 50-18801 - 50-18801F1
Rugged construction for durability. Mount from inside transom. Bulk items come in reusable bucket. Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. Snap-Lock Plugs: Cam-action provides easy installation. Will not jar loose.
Drain Plug-1 Twist-Brass(Bul - 50-18800 - 50-18800F1
Rugged construction for durability. Mount from inside transom. Bulk items come in reusable bucket. Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. Snap-Lock Plugs: Cam-action provides easy installation. Will not jar loose.
Draw Tite Ball Mount - 2923 - 220-2923F1
Includes boxed 2 ball mount pin and clipE-Coat base with black powder coat finish
Draw-Tite 40330 Forged Ball Mount, 1" Rise, 2" Drop - 40330 - 220-40330F1
Solid one-piece forged construction 1" thick x 3" wide ball platformsAngled, easy-load designBlack powder coat finish over A-CoatFits 2" square receiver tube opening
Draw-Tite 40331 Forged Ball Mount, 3" Rise, 4" Drop - 40331 - 220-40331F1
Solid one-piece forged construction 1" thick x 3" wide ball platformsAngled, easy-load designBlack powder coat finish over A-CoatFits 2" square receiver tube opening
Draw-Tite 40332 Forged Ball Mount, 5" Rise, 6" Drop - 40332 - 220-40332F1
Solid one-piece forged construction 1" thick x 3" wide ball platformsAngled, easy-load designBlack powder coat finish over A-CoatFits 2" square receiver tube opening
Draw-Tite Ball Mount Kit - 2953 - 220-2953F1
7,500 lbs. GTW1 Ball Hole9 LengthFits 2 square receiver tube openingIncluldes pin and clipBlack powder coat finish over A-Coat
Draw-Tite Quick-Loading Ball Mount, 2" Drop, Black - 40342 - 220-40342F1
Features a revolutionary tapered shank design, easy-load ball mounts provide an easy connection to the receiver. Angle cut designFits 2" square receiver tube openingBlack powder coat finish over A-Coat
Draw-Tite Quick-Loading Ball Mount, 2" Drop, Black - 40343 - 220-40343F1
Features a revolutionary tapered shank design, easy-load ball mounts provide an easy connection to the receiver. Angle cut designFits 2" square receiver tube openingBlack powder coat finish over A-Coat
Draw-Tite Quick-Loading Ball Mount, 4" Drop, Black - 40344 - 220-40344F1
Features a revolutionary tapered shank design, easy-load ball mounts provide an easy connection to the receiver. Angle cut designFits 2" square receiver tube openingBlack powder coat finish over A-Coat
Draw-Tite Quick-Loading Ball Mount, 4" Drop, Black - 40345 - 220-40345F1
Features a revolutionary tapered shank design, easy-load ball mounts provide an easy connection to the receiver. Angle cut designFits 2" square receiver tube openingBlack powder coat finish over A-Coat
Draw-Tite Quick-Loading Ball Mount, 6" Drop, Black - 40346 - 220-40346F1
Features a revolutionary tapered shank design, easy-load ball mounts provide an easy connection to the receiver. Angle cut designFits 2" square receiver tube openingBlack powder coat finish over A-Coat
Dri-Z-Air Dehumidifier Classic Unit, 12/Case - Dza-U - 949-Dzuf1
Safely removes and absorbs excess moisture and musty smells from the air. Dri-Z-Air helps maintain woodwork and items in your home, boat, RV, garage, closets, and storage units. Dri-Z-Air units come with one 13 oz. bag of crystals.
Dri-Z-Air Dehumidifier Designer Unit, 12/Case - Dza-Du - 949-Dzaduf1
Safely removes and absorbs excess moisture and musty smells from the air. Dri-Z-Air helps maintain woodwork and items in your home, boat, RV, garage, closets, and storage units. Dri-Z-Air units come with one 13 oz. bag of crystals.
Dri-Z-Air Dehumidifier Refill Crystals, 13 Oz., 24/Case - Dza-13 - 949-Dzcryf1
Refill crystals for Dri-Z-Air units. Safely removes and absorbs excess moisture and musty smells from the air. Dri-Z-Air helps maintain woodwork and items in your home, boat, RV, garage, closets, and storage units.
Dri-Z-Air Dehumidifier Refill Crystals, 160 Oz., 4/Case - Dza-160 - 949-Dza160F1
Refill crystals for Dri-Z-Air units. Safely removes and absorbs excess moisture and musty smells from the air. Dri-Z-Air helps maintain woodwork and items in your home, boat, RV, garage, closets, and storage units.
Dri-Z-Air Dehumidifier Refill Crystals, 60 Oz., 8/Case - Dza-60 - 949-Dza60F1
Refill crystals for Dri-Z-Air units. Safely removes and absorbs excess moisture and musty smells from the air. Dri-Z-Air helps maintain woodwork and items in your home, boat, RV, garage, closets, and storage units.
Driftwood 2 Trim Mar/Merc - 61551P - 11-61551Pf1
Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel.
Drip Less Moldable Ptfe - 10146 - 355-10146F1
Drip-Less packing is a unique, clay-like material that molds to the inside of the stuffing box, creating a permanently-lubricated seal. Internally lubricated with low-friction compounds, it requires no water for lubrication. Properly installed, it completely seals off the shaft log to outside water. Unlike average flax packing which breaks down due to heat and contact with water, Drip-Less packing wears slowly and lasts several seasons.
Drive Sleeve - 8M0047148 - 710-8M0047148F1
Plastic drive sleeve Flo-Torq Reflex Composite Drive Sleeve
Drug Plaque - P229 - 22-P229F1
Avoids the risk of arrest and seizure. Recommended for all commercial vessels. Yellow with black lettering.
Ds007 Professional Film Cutting Knife - Ds-007 - 315-Ds007F1
Hooked ends for safe cutting.Color may vary.
Ds36 Access Door 30" X 36", Clear - Ds36 - 315-Ds36F1
Features zipper closure.
Ds36B Access Door 30" X 36", Blue - Ds36B - 315-Ds36Bf1
Features zipper closure.
Ds36W Access Door 30" X 36", White - Ds36W - 315-Ds36Wf1
Features zipper closure.
Ds48 Access Door 36" X 48", Clear - Ds48 - 315-Ds48F1
Features zipper closure.
Ds48B Access Door 36" X 48", Blue - Ds48B - 315-Ds48Bf1
Features zipper closure.
Ds48W Access Door 36" X 48", White - Ds48W - 315-Ds48Wf1
Features zipper closure.
Ds72 Access Door 36" X 72", Clear - Ds72 - 315-Ds72F1
Features zipper closure.
Ds72W Access Door 36" X 72", White - Ds72W - 315-Ds72Wf1
Features zipper closure.
Dsshfast9986 6' Extension For 998 Gun - Ds-Shfast998-6 - 315-Dsshfast9986F1
6' Extension for 998 Gun
Dssupercap Super Cap - Ds-Supercap - 315-Dssupercapf1
The Super Cap is designed to transfer the weight of snow, ice, and rain from the top of 2" x 4" support poles used under shrink wrap storage covers. Dome shaped and 20" in diameter, the Super Cap rests on the woven cord strapping running both lengthwise and crosswise, thus minimizing support poles from poking through shrink wrap covers. Super Caps can be easily attached to wooden uprights with either a nail or staples.
Dual Alarms 12V Box Packed - 4112-Rc000-Bx - 12-4112Rcf1
RC Buzzer/LED Pilot light "Dual Alarm" Combination warning light and buzzer which operate simultaneously to indicate low oil pressure and high or low engine temperature. Universal application will fit any electrical switch. 12 volts DC. Red lens. 11/16" diameter x 17/32" long Mounting stem. Heavy steel case, plated to resist corrosion. Body size is 1-7/8" long, 1" wide and 1-11/32" high. Fits panels up through 13/64" thick. Wiring diagrams included.
Dual Bus Plus 1/4" Stud - 2722-Bss - 661-2722F1
Combines negative and positive busses on one block, clear lexan lid snaps on to meet CG and ABYC insulation requirements. Features tin-plated copper bus and stainless steel hardware.
Dual Bus Plus 5/16" Stud - 2723-Bss - 661-2723F1
Combines negative and positive busses on one block, clear lexan lid snaps on to meet CG and ABYC insulation requirements. Features tin-plated copper bus and stainless steel hardware.
Dual Common Bus +/-5 Cir - 2701-Bss - 661-2701F1
Combine negative and positive buses on one block. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 amps. Maximum 48 volts DC.
