Select Category
General
Samlex Power Pst1000F Pst Series 1,000W Pure Sine Wave Inverter - Pst-1000F-12 - 705-Pst1000F12F1
This high efficiency pure sine inverter converts 12 Volts DC to AC power at 120 Volts, 60 Hz. Features include temperature controlled cooling, low interference, wide temperature operating range, overload protection, low battery alarm / shut down & low idle power draw of less than 1 Amp. AC power is available from dual NEMA-20R GFCI outlets on the front panel, the unit is also hard wire capable. Safety certified to UL and CSA standards, FCC Compliant. Silent Operation - temperature controlled colling fan runs quietly and reduces energy consumptionLow interference - won't disrupt the reception of your TV, radio or audio equipmentTwo GFCI protected outletsIdentical to household electricity
Samlex Power Pst150012 Pst Series 3,000W Pure Sine Wave Inverter - Pst-1500-12 - 705-Pst150012F1
This high efficiency pure sine inverter converts 12 Volts DC to AC power at 120 Volts, 60 Hz. Features include temperature controlled cooling, low interference, wide temperature operating range, overload protection, low battery alarm / shut down & low idle power draw of less than 1 Amp. AC power is available from dual NEMA-20R GFCI outlets on the front panel, the unit is also hard wire capable. Safety certified to UL and CSA standards, FCC Compliant. Silent Operation - temperature controlled colling fan runs quietly and reduces energy consumptionLow interference - won't disrupt the reception of your TV, radio or audio equipmentTwo GFCI protected outletsIdentical to household electricity
Samlex Pst300012 Pst Series 3,000W Pure Sine Wave Inverter - Pst-3000-12 - 705-Pst300012F1
This high efficiency pure sine inverter converts 12 Volts DC to AC power at 120 Volts, 60 Hz. Features include temperature controlled cooling, low interference, wide temperature operating range, overload protection, low battery alarm / shut down & low idle power draw of less than 1 Amp. AC power is available from dual NEMA-20R GFCI outlets on the front panel, the unit is also hard wire capable. Safety certified to UL and CSA standards, FCC Compliant. Silent Operation - temperature controlled colling fan runs quietly and reduces energy consumptionLow interference - won't disrupt the reception of your TV, radio or audio equipmentTwo GFCI protected outletsIdentical to household electricity
Samlexpower Sam-1000-12 Sam Series 1,000W Modified Sine Inverter - Sam-1000-12 - 705-Sam100012F1
SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. 2 three prong outletsLoad controlled cooling fanLow battery input alarmUniversal protection circuit: thermal, battery, overload, short circuit, earth fault
Samlexpower Sam-1500-12 Sam Series 1,500W Modified Sine Inverter - Sam-1500-12 - 705-Sam150012F1
SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. 2 three prong outletsLoad controlled cooling fanLow battery input alarmUniversal protection circuit: thermal, battery, overload, short circuit, earth fault
Samlexpower Sam-2000-12 Sam Series 2,000W Modified Sine Inverter - Sam-2000-12 - 705-Sam200012F1
SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. 2 three prong outletsLoad controlled cooling fanLow battery input alarmUniversal protection circuit: thermal, battery, overload, short circuit, earth fault
Samlexpower Sam-3000-12 Sam Series 3,000W Modified Sine Inverter - Sam-3000-12 - 705-Sam300012F1
SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. 2 three prong outlets ( SAM-3000-12 has 3 three prong outlets)Load controlled cooling fanLow battery input alarmUniversal protection circuit: thermal, battery, overload, short circuit, earth fault
Samlexpower Sts-30 30A Transfer Switch - Sts-30 - 705-Sts30F1
Connect a Samlex Transfer Switch to your generator, or to your inverter/battery bank and have your AC source switched automatically to shore power when you plug in. Automatically switches between 2 separate AC input sources: Utility Power and a Generator; or Utility Power and Inverter; or Generator and InverterHas rated capacity of 30 Amps at 120 VAC and is suitable for 30 Amp Utility Power Cord and Generator of up to 3.6 KVA capacityUses heavy duty Double Pole Double Throw (DPDT) relay for switching both the Line and NeutralCan be installed on the line side of the main breaker panel allowing switching of the entire load or on the load side to only switch dedicated circuitsDIP Switch select to enable time delay of 20 to 25 sec when transferring to a generatorComes with a standard North American power cord for convenient connection to 15 Amp NEMA5-15R receptacles on a generator or an inverter with up to 1800 VA capacity (Replace this cord with 30 Amp cord if full 30 Amp capacity is required)NEMA5-20R Duplex Receptacle for convenient connection of battery charger
Satin Chrome Tip Lit Illuminated Toggle Switch - Tg23050 - 11-Tg23050F1
Non-corrosive plastic construction with chrome plated toggles and chrome/brass bezels. Tip lit toggle illuminates white when panel lights are ON, changes to red when switch is ON. Brass blade terminals, silver contacts. 15/32" L x 15/32" -32 mounting stem. Rated: 20 amps @ 12 VDC. On in parenthesis (On) indicates a momentary position.
Satin Finish - Eew750 - 331-Sfw750F1
A one component enamel based on alkyd/urethane resins. Eggshell finish for interior use on wood, steel, fiberglass and aluminum in conjunction with the appropriate primer systems. For maintenance of existing intact interior finishes. Quick drying, smooth hard satin finish with beautiful, long lasting protection. Resistant to water, alcohol, most onboard chemicals and abrasion.
Save Water-Shower With A Friend - Fp026 - 22-Fp026F1
The perfect gift item. Made of durable molded plastic. Measure 3" W x 5-1/2" H and have adhesive backing except FP001 measures 2-1/2" W x 3-3/4" H. Easy to apply with no need for screws. Yellow lettering on black background, except where noted.
Scandvik 10008P Door Holder, Small - 10008P - 390-10008Pf1
Stainless Steel.
Scandvik 10009P Door Holder, Large - 10009P - 390-10009Pf1
Stainless Steel.
Scandvik 10030P Replacement Cap For Vertical Mount Showers. - 10030P - 390-10030Pf1
Replacement Cap, White
Scandvik 10056 Chrome Plated Brass Folding Cold Water Tap With Clear Acrylic Knob - 10056P - 390-10056Pf1
This folding tap is ideal for a sink, under a seat, or in a bait station. Can be mounted vertically or horizontally. Chrome plated brass body and spout with a clear acrylic knob. 3/8" Male BSP threads with a 1/2" NPT nylon adapter included. 5/8" Mounting hole.
Scandvik 10091 Chrome Plated Brass Compact Cold Water Tap For Shower Control With Chrome Plastic Knob (Bulkhead Or Counter Top Mount) - 10091P - 390-10091Pf1
This compact cold water shower control can be counter top or bulkhead mounted. Maximum counter or bulkhead thickness 3/8". 3/8" male BSP thread water connection, included 1/2" NPS adapter. Features a male 3/8" BSP output designed to work with Scandvik shower hoses.
Scandvik 10169 Standard Cold Water Tap With Double Bend Swivel Spout, Standard Knob - 10169P - 390-10169Pf1
Chrome plated brass tap with double bend spout has a blue indicator ring on knob. Water Connection: 1/2" male straight NPT. 7/8" Mounting hole. 1/4 Turn ceramic valve.
Scandvik 10172 Chrome Plated Brass Standard Cold Water Tap With Swivel Spout And Standard Knob - 10172P - 390-10172Pf1
With J spout. Chrome plated brass. 1/2" NPT male straight thread. Requires a 7/8" mounting hole. 1/4 Turn ceramic valve.
Scandvik 10252 White Replacement Cap Only For Horizontally Mounted Recessed Showers 10055 ,10275, 10298 And 10826 - 10252 - 390-10252F1
Replacement Cap, White
Scandvik 10300 1-1/4" Outlet Sink Drain With Stopper Fits 2-1/16" Drain Hole - 10300P - 390-10300Pf1
All drains include stoppers.
Scandvik 10313 1-1/2" Outlet Sink Drain With Basket And Stopper Fits 2-1/16" Drain Hole - 10313P - 390-10313Pf1
All drains include stoppers.
Scandvik 10341 P-Trap For Sink Drain - 10341 - 390-10341F1
Fits drains with 1-1/2" male threaded outlets.Inlet: 1-1/2" Female Threaded.
Scandvik 10352 Cockpit Or Shower Drain Fits 2-1/16" Drain Hole, 1-1/2" Threaded Outlet - 10352 - 390-10352F1
Drain basket compresses from below when tightening screen from above. Included screw (6mm) allows up to 1/2" floor thickness. Stainless grate diameter is 2-3/4".
Scandvik 10410P Standard Family Chrome Plated Brass Basin Mixer Faucet - 10410P - 390-10410Pf1
Heavy duty cast spout. Water Connection: flexible supply lines with 1/2" NPS-F fittings. Material: chrome plated brass. Mounting hole: 1". 1/4 turn ceramic valve.
Scandvik 10422 Chrome Plated Brass Galley Mixer Faucet With Swivel Spout, Standard Knob - 10422 - 390-10422F1
This chrome plated brass unit is our most popular galley mixer design with a swivel spout and 1/4 turn ceramic valves. 3/8" BSP connections with 1/2" male NPT fittings included. 1" Mounting hole.
Scandvik 10438 Chrome Plated Brass Galley Mixer With High-Reach Swivel Spout, Standard Knob - 10438P - 390-10438Pf1
Chrome plated brass galley mixer with high reach, swivel J spout. Flexible supply lines with 1/2" NPS female fitting. 1" Mounting hole.
Scandvik 10474P Chrome Plated Brass J Spout Folding Mixer Faucet - 10474P - 390-10474Pf1
High reach J spout, folding mixer. Separate side mounted single lever controls provide positive adjustment. Water connection 3/8" BSP threaded shafts with 1/2" NPS-M Nylon adapters included. Material chrome plated brass. Mounting holes (2) 5/8", 2-3/16" center to center. 1/4 turn ceramic valves.
Scandvik 10480P Single Lever Mixer, Chrome/Brass - 10480P - 390-10480Pf1
Chrome plated brass single lever basin or small galley mixer. Swivel spout. Ceramic valve. Flexible supply lines with 1/2" NPS-F fittings. 1-1/4" mounting hole.
Scandvik 10485P Chrome Plated Brass Basin / Head Mixer Faucet - 10485P - 390-10485Pf1
Heavy duty cast basin mixer with ceramic valve and single lever control. Water connection: flexible supply lines with 1/2" NPS-F fittings. Material: chrome plated brass. Mounting hole: 1-1/2".
Scandvik 10500P Compact Shower Mixer, Chrome Plated Brass - 10500P - 390-10500Pf1
Compact single lever shower mixer. Flexible 3/8" BSP-M output line for hose connection. Flexible supply lines with 1/2 NPS-F fittings. Mounting Hole: 1-15/16".
Scandvik 10580 Folding Square Spout Cold Water Tap - 10580P - 390-10580Pf1
The "Piato" is built on the platform from the Folding Ceramic family, we have added the square spout from the Geometric family. Suitable for most modern interiors of today's boats A ceramic valve cartridge, for drip free service. Solid brass with chrome finish body, chrome ABS knob, Water Connection: 3/8" BSP-M threaded shaft, 1/2" NPS-M adapter included. Mounting Hole: 5/8"
Scandvik 10615P Compact Shower Mixer, White Powder Coated - 10615P - 390-10615Pf1
Compact single lever shower mixer. Flexible 3/8" BSP-M output line for hose connection. Flexible supply lines with 1/2" NPS-F fittings. Mounting Hole: 1-15/16".
Scandvik 12104P Recessed Cup And Cap - 12104P - 390-12104Pf1
Recessed cap and cup design made with Dupont™ Zytel® Nylon Resin for greater strength and more UV exposure resistance. Rubber gasket under the cap will keep water out when cap is closed. Requires a 2-3/4" mounting hole.
Scandvik 16000P Geometric Folding Mixer W/Swivel Spout, Chrome Brass - 16000P - 390-16000Pf1
Our Geometric family with square, radical styling has intrigued the industry. Features inward opening valve handle to prevent accidental opening in rough conditions while underway. Water Connection: Flexible supply lines with 1/2" NPS-F fittings
Scandvik 16200P Compact Mixer - 16200P - 390-16200Pf1
Chrome plated brass compact galley or basin mixer. Ceramic valve. 1/2" water connection. Mounting Hole: 1-1/4". Features inward opening valve handle to prevent accidental opening in rough conditions while underway.
Scandvik 20' Extension Cable Male/Female - 41616 - 390-41616F1
20' Extension Cable
Scandvik 41598P Tortuga Dimmer - 41598P - 390-41598Pf1
Designed to easily adjust the interior or exterior light level from 0-100% output. Touch the "up" button to turn light on and touch the "down" button to turn light off. Press and hold either up or down, on the included switch, to increase or decrease the light output level to your likeness. Release at any point to maintain the current brightness. If you are leaving the boat, the Tortuga features an exit mode. Push the "down" button two times within 1.5 seconds, the light will flash twice, and turn off after 1 minute. Pulse Width Modulated so it will work with LED, incadescent or halogen lights. Die cast aluminum housing, IP66. Includes switch.
Scandvik 50100 Breeze Countertop Display - 50100 - 390-50100F1
Contains 90 assorted Breeze 316 Power-Seal and 316 Mini stainless steel hose clamps and display rack. Includes 1 box (10ea) of sizes 4, 6, 10, 12, 20, 24, 28, 32 & 36.
Scandvik 50105 Breeze Cruiser Pack - 50105 - 390-50105F1
Contains 50 assorted Breeze 316 stainless steel clamps and 50 protective clamp tail sleeves. Includes 1 box (10ea) of sizes 4, 8, 10, 20 & 32.
Scandvik 70000 Chrome Plated Brass Classic Cold Water Only Basin Tap - 70000 - 390-70000F1
Chrome plated cast brass tap with a traditional style knob. Has a 1/2" NPT threaded shaft. 7/8" Mounting hole. 1/4 Turn ceramic valve.
Scandvik 70001 Chrome Plated Brass Classic Basin Mixer Faucet - 70001 - 390-70001F1
Traditional styling with modern day enhancements define the concept behind the Classic family. Chrome plated brass. 1/2" NPT female water connection. 1-3/8" Mounting hole.
Scandvik 70002 Chrome Plated Brass Classic Swivel J-Spout Galley Mixer Faucet - 70002 - 390-70002F1
Traditional styling with modern day enhancements define the concept behind the Classic family. Chrome plated brass. 1/2" NPT female water connection. 1-3/8" Mounting hole.
Scandvik 70104 Chrome Plated Brass Nordic J-Spout Galley Mixer Faucet - 70104 - 390-70104F1
Modern styling in a chrome plated cast brass faucet body with an easy to use single lever control that withstands the corrosive marine environment. Cast faucet body provides a solid feel. Tall J spout galley mixer. Vertical single lever rod provides easy volume control and temperature setting. 1/2" female NPT water connection. 1-3/8" Mounting hole.
Scandvik Chrome Plated Brass Cold Water Folding Faucet - 10089 - 390-10089F1
Chrome plated brass fold down cold water tap with a chrome plated plastic knob. Ideal for installing in a sink, under a seat, or in a bait station. Vertical or horizontal installation. 3/8" Male BSP threaded shaft with 1/2" male NPT nylon adapter. 5/8" Mounting hole.
Scandvik Flex Strip End Caps, Pr. - 41600 - 390-41600F1
End caps for flex trak.
Scandvik Folding Tap - 10180P - 390-10180Pf1
Compact ceramic cold water tap with a tall swiveling and folding spout for vertical or horizontal installation. Spout folds and swivels for minimum obtrusion when tucked away. Chrome plated brass. Water connection 3/8" BSP threaded shaft with 1/2" NPS-M Nylon adaptor included. Mounting hole 5/8". 1/4 turn ceramic valve.
Scandvik Folding Tap, Low Spout - 10183P - 390-10183Pf1
Compact ceramic cold water tap with a low swiveling and folding spout. Vertical or horizontal installation. The combination of it's low profile and short spout gives this tap the ability to be installed in locations you might not otherwise be able to fit a tap. Water connection 3/8" BSP threaded shaft with 1/2" NPS-M Nylon adaptor included. Chrome plated brass. Mounting hole 5/8". 1/4 turn ceramic valve.
Scandvik J Spout Folding Swiwel Cold Water Tap - 74125 - 390-74125F1
Made of durable, low maintenance passivated 304 stainless steel. This light weight cold water tap is perfect for installation on flybridge, bar or aft cockpit locations. Spout folds and swivels for horizontal or vertical installation. Water connection: 1/2" NPS-M. Material: passivated 304 stainless steel, brush finish. Mounting hole: 7/8".
Scandvik Pvc Tail Pipe, 1-1/2" X 5" - 10316P - 390-10316Pf1
5" Long, with 1-1/2" female threaded connection & 1-1/2" outlet.
Scandvik Pvc Tail Pipe, 1-1/4" X 4-1/4" - 10303P - 390-10303Pf1
4-1/4" Long, with 1-1/4" female threaded connection & 1-1/4" outlet.
Scandvik Recessed Euro Sprayer Shower - 12133P - 390-12133Pf1
Stainless steel recessed shower used in vertical or horizontal installations. Manufactured from passivated 316 stainless steel, our cap design will add a touch of elegance to your boat. The friction lock hinge holds the cap open. Water connection: 3/8" BSP-F fitting, 1/2" NPS adaptor available. Material: 316 stainless steel cap, 6' white nylon hose and white composite cup. Mounting hole: 2-3/4".
Scandvik Recessed Push Button Shower - 12131P - 390-12131Pf1
Stainless steel recessed shower used in vertical or horizontal installations. Manufactured from passivated 316 stainless steel, our cap design will add a touch of elegance to your boat. The friction lock hinge holds the cap open. Water connection: 3/8" BSP-F fitting, 1/2" NPS adaptor available. Material: 316 stainless steel cap, 6' white nylon hose and white composite cup. Mounting hole: 2-3/4".
Scandvik Sink Drain, Chrome Plated Brass W/Flip Stopper - 19004P - 390-19004Pf1
Fits 1-7/8" drain hole.
Scandvik Sink Drain, Chrome Plated Brass W/Flip Stopper - 19006P - 390-19006Pf1
Fits 1-5/8" drain hole.
Scanstrut Apt15001 6" Aluminum Powertower®, White - Apt-150-01 - 922-Apt15001F1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Apt15001Blk 6" Aluminum Powertower®, Black - Apt-150-01-Blk - 922-Apt15001Blkf1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Apt150Sl01 Starlink Aluminium Powertower, White - Apt-150-Sl-01 - 922-Apt150Sl01F1
Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminium. No need to cut the cable connectors off for installation? Mounting gasket included. Marine sealant not requiredOverall Height 9.38". Tower (6" H) with wedge
Scanstrut Apt150Sl01Blk Starlink Aluminium Powertower, Black - Apt-150-Sl-01-Blk - 922-Apt150Sl01Blkf1
Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminum. No need to cut the cable connectors off for installation?.Mounting gasket included. Marine sealant not required. Overall Height 9.38". Tower (6" H) with wedge
Scanstrut Apt25001 10" Aluminum Powertower®, White - Apt-250-01 - 922-Apt25001F1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Apt25001Blk 10" Aluminum Powertower®, Black - Apt-250-01-Blk - 922-Apt25001Blkf1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Aptf15001 6" Aluminum Powertower®, White - Apt-F-150-01 - 922-Aptf15001F1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Compact Deck Pod - Up To 9" Displays (Slim Back) - White - Spd-8-W - 922-Spd8Wf1
Solve the challenge of finding a level mounting surface to install your displays onto your boat.Fully Adjustable - Easy-to-release lever can be operated with one handSwivel the pod, tilt to your requirements, then lock back into positionOptimum Viewing AngleAn adjustable ball joint allows a range of movement and multiple mounting anglesAdded StrengthAn inner bracing plate secures the Deck Pod base to the Pod and adds rigidity to the assemblyAlso eliminates potential damage from shock and vibration
Scanstrut Deck Pod - 12" Displays (Slim Back) - White - Spd-12-W - 922-Spd12Wf1
Solve the challenge of finding a level mounting surface to install your displays onto your boat.Fully Adjustable - Easy-to-release lever can be operated with one handSwivel the pod, tilt to your requirements, then lock back into positionOptimum Viewing AngleAn adjustable ball joint allows a range of movement and multiple mounting anglesAdded StrengthAn inner bracing plate secures the Deck Pod base to the Pod and adds rigidity to the assemblyAlso eliminates potential damage from shock and vibration
Scanstrut Extension 6M F/Lmb Pmg - Lmb-Extshort - 922-Lmbextshortf1
Scanstrut Mast Mount - M92722 - 922-M92722F1
The original and first choice for boat owners around the world, Scanstrut Mast Mounts are a cost-effective and space-saving solution for installing your radome or satcom antenna. Larger mounting foot is stronger, stiffer and now easier to fit than ever. Universal Mounting - attaches to the mast with four swivel feet, matching a variety of mast profilesSafety wire kit - independently attaches scanner to mastStrong Fixing - 12 point fixing using high quality monel rivetsCompact mounting - antenna extends only minimum distance from the front of the mast See www.scanstrut.com for the most current Radome & Satcom Compatibility
Scanstrut Mast Mount - Sc12 - 922-Sc12F1
The original and first choice for boat owners around the world, Scanstrut Mast Mounts are a cost-effective and space-saving solution for installing your radome or satcom antenna. Larger mounting foot is stronger, stiffer and now easier to fit than ever. Universal Mounting - attaches to the mast with four swivel feet, matching a variety of mast profilesSafety wire kit - independently attaches scanner to mastStrong Fixing - 12 point fixing using high quality monel rivetsCompact mounting - antenna extends only minimum distance from the front of the mast See www.scanstrut.com for Radome & Satcom Compatibility
Scanstrut Mast Mount - Sc20 - 922-Sc20F1
The original and first choice for boat owners around the world, Scanstrut Mast Mounts are a cost-effective and space-saving solution for installing your radome or satcom antenna. Larger mounting foot is stronger, stiffer and now easier to fit than ever. Universal Mounting - attaches to the mast with four swivel feet, matching a variety of mast profilesSafety wire kit - independently attaches scanner to mastStrong Fixing - 12 point fixing using high quality monel rivetsCompact mounting - antenna extends only minimum distance from the front of the mast See www.scanstrut.com for Radome & Satcom Compatibility
Scanstrut Mt Radar Pole Pmg - Sc101 - 922-Sc101F1
Totally universal, the SC100 Pole Mount installs your radar or satcom antenna onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation. 360° Adjustable anodized aluminum base enables pole to be installed on both sloping transoms and level decksUnique pole extrusion accommodates two cable channels with a cover strip to hold cables in place and out of viewSupplied with two support modules which provide maximum fore / aft and sideways supportEasily removable for storageMarine grade 6082 Aluminum pole with a polyester powder coat for a durable and gloss white finish
Scanstrut Mt Radar Pole Pmg - Sc102 - 922-Sc102F1
Totally universal, the SC100 Pole Mount installs your radar or satcom antenna onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation. 360° Adjustable anodized aluminum base enables pole to be installed on both sloping transoms and level decksUnique pole extrusion accommodates two cable channels with a cover strip to hold cables in place and out of viewSupplied with two support modules which provide maximum fore / aft and sideways supportEasily removable for storageMarine grade 6082 Aluminum pole with a polyester powder coat for a durable and gloss white finish
Scanstrut Pt2005 Composite Powertower®, 6" - Pt2005 - 922-Pt2005F1
Designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance. Scanstrut's Composite PowerTower offers a single "monocoque" structure for outstanding strength and surface finish. Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
Scanstrut Pt3010 4° Radar Base Wedge For Powertowers - Pt3010 - 922-Pt3010F1
Angles your radar down 4° below horizontal providing a level horizon for your radar when the boat is bow's up underwayFits under PowerTower with a base seal to ensure a watertight install
Scanstrut Rokk Midi Top Plate Only - Rl-502 - 922-Rl502F1
A multi-position, fully adjustable mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.All ROKK Midi top plates are also compatible with ROKK Mini system.A complete system consists of a top plate and a body w/mount. Both parts are sold separately.
Scanstrut Rokk Midi Top Plate Only - Rl-503 - 922-Rl503F1
A multi-position, fully adjustable mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.All ROKK Midi top plates are also compatible with ROKK Mini system.A complete system consists of a top plate and a body w/mount. Both parts are sold separately.
Scanstrut Rokk Midi Top Plate Only - Rl-505 - 922-Rl505F1
A multi-position, fully adjustable mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.All ROKK Midi top plates are also compatible with ROKK Mini system.A complete system consists of a top plate and a body w/mount. Both parts are sold separately.
Scanstrut Rokk Midi Top Plate Only - Rl-507 - 922-Rl507F1
A multi-position, fully adjustable mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.All ROKK Midi top plates are also compatible with ROKK Mini system.A complete system consists of a top plate and a body w/mount. Both parts are sold separately.
Scanstrut Rokk Mini Raymarine Dragonfly 4/5/7 Pro Plate Only - Rl-512 - 922-Rl512F1
ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.
Scanstrut Rokk Mini Suction Cup Mount Only - Rls-405 - 922-Rls405F1
ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.
Scanstrut Rokk Mini Surface Mount Only, Fixed - Rls-401 - 922-Rls401F1
ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.
Scanstrut Safety Tether (Lanyard) - Rl-Teth - 922-Rltethf1
Safety Tether (Lanyard)
Scanstrut Sc12Vf1 Flip Pro 12V Power Socket - Sc-12V-F1 - 922-Sc12Vf1F1
Flip Pro 12V Power Socket takes onboard power delivery to a new level, featuring a IPX4 spring loaded lid, and an impressive 150W max power on a 12V system. When not in use, the spring-loaded cap remains tightly closed, protecting the socket from the elements. When in use, it quickly locks open to protect your cables when plugged in. Universal, fits all 12V power socketsSupplied with a front-fit bezel kitEasy install, using a 1.25" hole sawMarine Ready. UV resistant with internal anti-corrosion protective coating and SS hinge and springIPX4 spring loaded lid, waterproof when cover is closedRed LED running lightImpressive 150W max power on a 12V system
Scanstrut Scaoba2 Atmos Built-In Air Station - Sc-Aob-A2 - 922-Scaoba2F1
ATMOS is the ultimate waterproof, built-in onboard air station that inflates your paddleboards, foils, tenders and more! Compact, lightweight, and sleek, Maximizes convenience without taking up precious space. With both inflate and deflate functions simply set the target pressure at the push of a button. Soft Touch TPE buttons and cutting-edge LCD display. Brushless technology - for power, efficiency, and reliability. Innovative two-stage pump: High-volume, low-pressure (HVLP) / High-pressure, low-volume (HPLV). Max pressure 20 PSI / 1.37 BARMax volume of airflow 1-20 PSI 70 LPM/2.5 CFMMax current draw 12A (140W)Minimum cavity depth required 4.33", Can be installed at an angle ranging from +10° to -30° from vertical^Includes: ATMOS Unit, Black Sun Cover (Optional white cover SC-AOB-A2-SC1), 8' Hose & 6 Hose Adapters including Boston Valve, C7 Valve, H3/HR Valve, Pinch Valves, and 805 ValvesCompact and shallow designMinimum cavity depth required 4.33", Can be installed at an angle ranging from +10° to -30° from verticalBrushless Technology - for power, efficiency, and reliabilityInnovative two-stage pump: High-volume, low-pressure (HVLP) / High-pressure, low-volume (HPLV)Includes: ATMOS Unit, Black Sun Cover (optional white cover SC-AOB-A2-SC1), 8' Hose & 6 Hose Adapters including Boston Valve, C7 Valve, H3/HR Valve, Pinch Valves, and 805 Valves
Scanstrut Scmultif1 Flip Pro Multi Usb & 12V Power Socket - Sc-Multi-F1 - 922-Scmultif1F1
Combing features of our high-power Flip Pro Max and 12V Power Sockets into a beautiful multi-power solution. When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements. Universal fit for any USB-C connectorsFast charge (60W max) up to 2 devices at a timeSupplied with a front-fit bezel kitMarine Ready UV resistant with internal anti-corrosion protective coating and SS Hinge and springIPX4 waterproof with the cover closed120 -150W max power. Ouputs 12V.12V or 24V input, 12V only output
Scanstrut Scmultif2 Flip Pro Multi Usb & 12V Power Socket, Sc-Multi-F2 Usb-A/Usb-C & 12V Socket - Sc-Multi-F2 - 922-Scmultif2F1
Combines the features of our high-power Flip Pro Max and 12V Power Sockets into a beautiful multi-power solution USB connectorsFast charge (60W max on 24V) up to 2 devices at a timeSupplied with a front-fit bezel kitUV resistant with internal anti-corrosion protective coating and SS Hinge and springIPX4 waterproof with the cover closed120 -150W max power @12V12V or 24V input, 12V only output
Scanstrut Scsl01 Starlink Flat High-Performance Aluminum Wedge, White - Sc-Sl-01 - 922-Scsl01F1
The Scanstrut Aluminium 8° Wedge Mount for Starlink Flat High-Performance has been specifically designed for the marine environment. This versatile wedge can serve as a standalone option for mounting Starlink directly onto a boat's roof or deck or is compatible with the Scanstrut Modular Dual PowerTower Range and SC103/4 Pole Mounts.. Ideal for multi-electronic installations on powerboats. Designed specifically for transom mounting on sailing boats, ensuring that your Starlink hardware is elevated to an optimal position while optimizing space onboard. Designed to fit, designed to fit Starlink High-PerformancePre-drilled mounting holes allow Starlink to fasten straight to the PowerTowerNo need to cut the cable connectors off for installation, Mounting gasket included. Marine sealant not required
Scanstrut Scsl01Blk Starlink Flat High-Performance Aluminum Wedge, Black - Sc-Sl-01-Blk - 922-Scsl01Blkf1
The Scanstrut Aluminium 8° Wedge Mount for Starlink Flat High-Performance has been specifically designed for the marine environment. This versatile wedge can serve as a standalone option for mounting Starlink directly onto a boat's roof or deck or is compatible with the Scanstrut Modular Dual PowerTower Range and SC103/4 Pole Mounts.. Ideal for multi-electronic installations on powerboats. Designed specifically for transom mounting on sailing boats, ensuring that your Starlink hardware is elevated to an optimal position while optimizing space onboard. Designed to fit, designed to fit Starlink High-Performance.Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTowerNo need to cut the cable connectors off for installation. Mounting gasket included. Marine sealant not required
Scanstrut Self Leveling Radar Backstay Mount - Lmb-A1 - 922-Lmba1F1
Self-Levelling Radar Mounts ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Positions your radar away from any interference, leaving a clear deck free from obstruction.
Scanstrut Self Leveling Radar Backstay Mount - Lmb-F1 - 922-Lmbf1F1
Self-Levelling Radar Mounts ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Positions your radar away from any interference, leaving a clear deck free from obstruction.
Scanstrut Self Leveling Radar Mast Mount - Lmm-1 - 922-Lmm1F1
Self-Levelling Radar Mounts ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Positions your radar away from any interference, leaving a clear deck free from obstruction.
Scanstrut Self Levelling Radar Pole Mount - Lmp-1 - 922-Lmp1F1
Self-Levelling Radar Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Fine tuned damping system which reacts to major changes in heel angle of the boatUnique Pole extrusion accommodates two cable channels with a cover strip to hold cables in place and out of view360° Adjustable anodized aluminum base gives choice when deciding where you wish to install the pole mount Base enables pole to be installed on both sloping transoms and level decksSupplied with two support modules which provide maximum fore / aft and sideways supportEasily removable for storage
Scanstrut Wdrad01 4° Radar Base Wedge For Powertowers - Wd-Rad-01 - 922-Wdrad01F1
Angles your radar down 4° below horizontal providing a level horizon for your radar when the boat is bow's up underwayFits under radomes with a base seal to ensure a watertight install
Scanstrut Wdradopnary 4° Radar Base Wedge For Powertowers - Wd-Opnary-01 - 922-Wdradopnaryf1
Angles your radar down 4° below horizontal providing a level horizon for your radar when the boat is bow's up underwayFits under open array radar antennas with a base seal to ensure a watertight install
Scantstrut Camera Power Tower, White, Fits: Flir M300, 5.9" Height Mount. - Cam-Pt-150-03 - 922-Campt15003F1
Maximize your camera's performance. Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTowerMarine sealant not requiredPaint finishes complies with our unique 4-step marine paint systemCAMPT15001 , CAMPT30002:Compact mounting profile to ensure a neat installation
