Select Category
Hardware & Deck
Seadog 491115 Boat Hook Mooring Cover Support Crown 1" X 15' Webbing Strap Kit, Pack Of 3 Straps - 491115-1 - 354-4911151F1
These Boat Hook Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15' straps, with a securing loop on one end and an adjustable snap clip on the other. They are designed to set once and then clipping in and out later for ease of use.
Seadog 4911081 Boat Hook Hull Scraper - 491108-1 - 354-4911081F1
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel.
Seadog 491105 Boat Hook Universal Thread 15" Microfiber Mop - 491105-1 - 354-4911051F1
Boat Hook Microfiber Mop provides gentle and effective cleaning action with its soft straps. The fast-drying microfiber is highly absorbent and scratch resistant, preventing water spots. Fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices.
Seadog 491055 Boat Hook Mooring Buoy Snap Kit - #8 Fastener - Cast 316 & 304 Stamped Stainless - 491055-1 - 354-4910551F1
The Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat.
Seadog 432620 Maxblast 20 Amp 125 Db 12V 11 Psi Dual 9-5/8" Trumpet Air Horn - Chrome Plated Brass - 432620-1 - 354-4326201F1
MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058.
Seadog 432597 Universal 20 Amp 11 Psi 12V Air Horn Compressor With Side Air Exit - Fits Sea-Dog Maxblast Air Horns - 432597-1 - 354-4325971F1
Universal Air Horn Compressor with Side Air Exit works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog 432590 Trumpet Horn Tube Cover | Fits All Sea-Dog Air Horns & Max Blast Electric Trumpet Horns - 432590-1 - 354-4325901F1
Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.
Seadog 432520 Maxblast 20 Amp 121 Db 12V 11 Psi Dual 17" Trumpet Air Horn - Chrome Plated Brass - 432520-1 - 354-4325201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 432510 Maxblast 20 Amp 120 Db 12V 11 Psi Single 17" Trumpet Air Horn - Chrome Plated Brass - 432510-1 - 354-4325101F1
MaxBlast Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 120 decibels and a frequency (Hz) of 315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577054.
Seadog 431620 Compact 7 Amp 112 Db 12V Dual 16" Trumpet Horn - Stamped 304 Stainless - 431620-1 - 354-4316201F1
Compact Dual Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 110 decibels and a frequency (Hz) of 460±15/415±15, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577072.
Seadog 431610 Compact 3.5 Amp 110 Db 12V Single 14" Trumpet Horn - Stamped 304 Stainless - 431610-1 - 354-4316101F1
Compact Single Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 460±15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577071.
Seadog 431540 Maxblast 5 Amp 123 Db 24V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431540-1 - 354-4315401F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431530 Maxblast 2.5 Amp 118 Db 24V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431530-1 - 354-4315301F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431520 Maxblast 10 Amp 123 Db 12V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431520-1 - 354-4315201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431510 Maxblast 5 Amp 118 Db 12V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431510-1 - 354-4315101F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431430-1 Pontoon Boat 12V Mini Compact Horn W/Bracket - 431430-1 - 354-4314301F1
Pontoon Boat Mini Compact Horn with Bracket is constructed of powder coated steel. Includes 304 stainless steel bracket for easy mounting. Recommended for fresh water applications. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2601746.
Seadog 431125 Max Blast Twin Mini 6 Amp 12V Compact Horn - Stamped 304 Stainless Cover - 431125-1 - 354-4311251F1
MaxBlast Twin Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490°20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577062.
Seadog 4269551 Sae Power Socket, Rear Nut Mount - 426955-1 - 354-4269551F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 7/8" hole with included locking nut.
Seadog 4269501 Sae Power Socket, Front Mount - 426950-1 - 354-4269501F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 3/4" hole w/ two #10 RH screws (not included).
Seadog 4269301 Sae Power Cable Power Plug Kit, 6" - 426930-1 - 354-4269301F1
The SAE type Polarized Electrical Plug Kit is a two-prong plug and socket connector set. 14-gauge lead wire with bullet-type contact pins. Includes two plugs, four heat shrink tubes, and four butt connectors allowing you to customize for your application. Max: 20A @ 12VDC.
Seadog 4269201 Sae Power Cable Y-Splitter, 12" - 426920-1 - 354-4269201F1
The SAE type polarized electrical connector is a two-prong plug and socket Y-splitter connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269121 Sae Power Cable, 12' - 426912-1 - 354-4269121F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269061 Sae Power Cable, 6' - 426906-1 - 354-4269061F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269031 Sae Power Cable, 3' - 426903-1 - 354-4269031F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269011 Sae Power Cable, 1' - 426901-1 - 354-4269011F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4265351 Surface Mount Usb 3.0 & Usb-C Power Socket, Oval - 426535-1 - 354-4265351F1
Surface mount USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 3/16" hole for the wire connection, secure to surface with two #6 screws (not included) and snapping concealed fastener cover in place. Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Blue LED illumination. IP65 rating. CE, RoHS compliant.
Seadog 4265311 Surface Mount Usb 3.0 & Usb-C Power Socket, Square - 426531-1 - 354-4265311F1
Surface mount USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 3/16" hole for the wire connection, secure to surface with two #6 screws (not included) and snapping concealed fastener cover in place. Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Blue LED illumination. IP65 rating. CE, RoHS compliant.
Seadog 426520 Double Usb 12V To 24V Input Rocker Switch Power Socket - 426520-1 - 354-4265201F1
Dual USB Rocker Switch Style Power Socket charges two devices simultaneously. Fits into any 13/16" x 1-7/16" rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating.
Seadog 4265191 Rainbow Volt Meter W/Usb 3.0 & Usb-C Power Socket - 426519-1 - 354-4265191F1
Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for fast and flexible charging. Protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information. (Red/orange: voltage is too low. Green: normal). Reads voltage up to 14.6 volts. Includes On/Off button to conserve battery power when not needed. Constructed of injection molded nylon. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Also fits Sea-Dog® Power Socket Shell (426100). Output DC: 5V/6A. Input: 8-32 VDC. IP65 rating. RoHS compliant.
Seadog 4265151 Double Usb 12V - 24V Input Power Socket - 426515-1 - 354-4265151F1
Dual USB Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Also fits Sea-Dog® Power Socket Shell (426100). Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating.
Seadog 4265131 Double Usb Power Plug W/Voltage & Amp Meter - 426513-1 - 354-4265131F1
Double USB Power Plug charges two devices simultaneously while the LCD screen displays charging status in amps, battery voltage, and low voltage audible alarm. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle. Constructed of stamped stainless steel and injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED display.
Seadog 426262 Polarized 3 Amp 2 Pin Electrical Outlet | #6 Fastener | Cast Brass & Chrome Plated - 426262-1 - 354-4262621F1
Constructed of chrome plated brass. For use as a 2-conductor deck cable outlet. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Seadog 4261421 Chrome Brass Polarized Cable Outlet & Plug - 426142-1 - 354-4261421F1
Polarized Electrical Outlet is constructed of chrome plated cast brass. For use as a 2-conductor deck cable outlet. Includes a rubber gasket and water resistant cap. 3A. 12 or 24VDC. Installs with two #6 RH fasteners (not included).
Seadog 4261061 Power Socket Rear Boot - 426106-1 - 354-4261061F1
PVC cover fits all power sockets and power socket meters. Protects wire connections and provides a finished appearance.
Seadog 4260131 Chrome Power Socket - 426013-1 - 354-4260131F1
Power Socket with Plate is ideal for installing additional power outlets. Chrome socket with a stamped 304 stainless steel mounting plate. Maximum: 12VDC, 16A. Installs with two #8 RH fasteners (not included).
Seadog 4216451 Dual Volt/Amp Meter - Rocker Switch Style - 421645-1 - 354-4216451F1
This rocker switch style dual volt/amp meter monitors and displays the voltage and amps simultaneously. Fits into any 13/16" X 1-7/16" rocker switch hole. Digital red LED display. Input 6-30VDC. IP65 rating.
Seadog 414900-3 Complete Windshield Washer 12V Kit | #10 Fastener - 414900-3 - 354-4149003F1
Comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles and mounting bracket with fasteners. Tank capacity is 2.5 liters/2.66 quarts. Fastener #10 RH.
Seadog 413054B-1 Premium Wiper Arm For Standard Motors, Black - 413054B-1 - 354-413054B1F1
Formed 304 stainless steel. Premium stainless steel wiper arm for use on standard motors (412321B-3, 412328B-3) and waterproof standard wiper motors (412321W-3, 412328W-3) with 3/8" shaft diameter.
Seadog 371840 Flush Mount Ski Tow | 3/8" Thread Diameter | Investment Cast 316 Stainless - 371840 - 354-371840F1
Flush mount ski tow designed to give your transom an updated look. Stud centers will allow direct replacement of the most popular standard ski tow. Includes backing plate.
Seadog 3570331 Deck Fill -Water - 357033-1 - 354-3570331F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 357033 Keyless Deck Fill-Water - 357033 - 354-357033F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570311 Deck Fill - Diesel - 357031-1 - 354-3570311F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570301 Gas Deckfill W/Keyless Cap - 357030-1 - 354-3570301F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570001 Black Nylon Fill Body W/O Cap - 357000-1 - 354-3570001F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 340041 Deck Drain 5-5/8" White Abs - 340041 - 354-340041F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400401 Deck Drain 5-5/8" Black Abs - 340040-1 - 354-3400401F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400211 Deck Drain 4-3/16" White Abs - 340021-1 - 354-3400211F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400201 Deck Drain 4-3/16" Black Abs - 340020-1 - 354-3400201F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3361651 Smooth Finish Quarter-Turn Deck Plate, Black,A:6-1/2" , B:8-1/8", C:6-1/2", D:7-3/8" - 336165-1 - 354-3361651F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361571 Smooth Finish Quarter-Turn Deck Plate, Black,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336157-1 - 354-3361571F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361551 Smooth Finish Quarter-Turn Deck Plate, Black, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336155-1 - 354-3361551F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361521 Smooth Finish Quarter-Turn Deck Plate, White, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336152-1 - 354-3361521F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361501 Smooth Finish Quarter-Turn Deck Plate, White,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336150-1 - 354-3361501F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361401, Smooth Finish Quarter-Turn Deck Plate,White,, A:4-1/2" , B:6-1/8", C:4-1/2", D:5-3/8 - 336140-1 - 354-3361401F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 335680 Adjustable Bronze Deck Plate Key - 6" Max Opening - 335680-1 - 354-3356801F1
Opens to a max of 6" and comes with two sizes of stainless steel pins 3/16" and 5/16" allowing it to fit most plates or caps. Satin finished bronze. Heavy duty constructionGreat addition to every tool boxCorrosion resistant
Seadog 3314101 Louvered Vent, 9" H X 5" W - 331410-1 - 354-3314101F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314001 Louvered Vent, 9-1/8" H X 4-5/8" W - 331400-1 - 354-3314001F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313901 Louvered Vent, 5" H X 4-5/8" W - 331390-1 - 354-3313901F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313801 Louvered Vent, 2-5/8" H X 5" W - 331380-1 - 354-3313801F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 328112 Adjustable 17" Bow Form Flagpole - 328112-1 - 354-3281121F1
Highly polished, heavy wall stainless steel tubing with injection molded nylon and polypropylene fittings. The flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips allowing mounting flexibility for a variety of flag or pennant sizes. Maximum safe speed 10 MPH.
Seadog 328079 Large Anchor Bow Roller 328074 Replacement Wheel - 5 Pieces Per Pack - 328079-1 - 354-3280791F1
Replacement wheel for large anchor bow roller.
Seadog 328076 Large Platform Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328076 - 354-328076F1
These corrosion resistant stamped 304 stainless steel Large Platform Bow Rollers are designed to handle most fluke style anchors and mount in or under the anchor slot of a platform or bow plank. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with six 3/8" bolts (not included).
Seadog 328074 Large Anchor Bow Roller | 1-1/2" Max Rope Diameter - 328074 - 354-328074F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328068 Pivoting Medium Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328068 - 354-328068F1
These corrosion resistant stamped 304 stainless steel Pivoting Medium Bow Rollers are designed to create a self-launching anchor system. As the anchor line is played out, the anchor roller pivots downward under the weight of the anchor, allowing it to fall freely into the water. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328064 Unpolished Medium Anchor Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328064 - 354-328064F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328057 Medium Fairlead Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328057 - 354-328057F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328054 Unpolished Seahook Style Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328054 - 354-328054F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328053 Unpolished Long Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328053 - 354-328053F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328052 Unpolished Short Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328052 - 354-328052F1
These corrosion resistant stamped 304 stainless steel Short Bow Rollers make dropping and weighing anchor a breeze. Easy to use, it reduces the risk of damage to the hull or deck. The rubber wheel accommodates rope up to 1" in diameter. Installs with three 3/8" bolts (not included).
Seadog 328051 Platform Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328051 - 354-328051F1
These corrosion resistant stamped 304 stainless steel Platform Bow Rollers are designed to handle most fluke style anchors using a variety of platform or bowsprit mounting options. The flanges hold the flukes of the anchor securely, reducing the risk of damage to the hull. The rubber wheel accommodates rope up to 1" in diameter. Installs with four 3/8" bolts (not included).
Seadog 327175 Rail Mount 9" Rod Holder | Fits 7/8" To 1" Tubing - 327175-1 - 354-3271751F1
Rail mount 9" rod holder designed with a front mount adjustment screw. Allows for easy adjustment without having to disassemble the rail mount brackets. A safety line on the rod and or reel is recommended when using rail mount rod holders.
Seadog 327130 Rail Mount Ring Buoy Bracket - Fits 7/8" Or 1" Tubing Or Direct Mount - 327130-1 - 354-3271301F1
The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
Seadog 3265853 Fillet & Prep Table - 326585-3 - 354-3265853F1
Solid one piece construction for long lifeUV stabilized high-density polyethylene
Seadog 3254251 Triple Threat™ Rod Holder - Track Mount W/ Extension, Black - 325425-1 - 354-3254251F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The addition of our 6" extension gives you more room in the cockpit and clearance for pedal drives. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. Constructed of injection molded glass filled nylon. The rod holder is interchangeable with either surface mount or track mount bases.
Seadog 3254161 Triple Threat™ Rod Holder - Track Mount, Black - 325416-1 - 354-3254161F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon.
Seadog 3254121 Triple Threat™ Rod Holder - Surface Mount, Black - 325412-1 - 354-3254121F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. Comes supplied with a surface mount base designed to be fastened directly to the boat. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon. Fasteners not included.
Seadog 325235 Flush Mount Rod Holder & Cap, Investment Cast 316 Stainless - 325235-1 - 354-3252351F1
The unique design of the cast stainless mounting flange accommodates a gasket reducing leakage common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included). This new design has the same liner and cap that is used on the stamped stainless steel rod holder (325175).
Seadog 325190 Side Mount 9" Rod Holder | Formed 316 Stainless | #10 Fastener - 325190-1 - 354-3251901F1
Side Mount Rod Holder slides in and out of mounting plate for a lower profile with not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16". Installs with four #10 FH fasteners (not included).
Seadog 325161 Plastic Flush Mount Rod Holder, Flat Dark Earth - 325166-1 - 354-325161F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251601 Plastic Flush Mount Rod Holder, Black - 325160-1 - 354-3251601F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251231 Side Mount Rod Holder, Flat Dark Earth - 325123-1 - 354-3251231F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251211 Side Mount Rod Holder, White - 325121-1 - 354-3251211F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251201 Side Mount Rod Holder, Black - 325120-1 - 354-3251201F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3250341 Triple Threat™ Three Pole Rod Holder, Flat Dark Earth - 325034-1 - 354-3250341F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250331 Triple Threat™ Three Pole Rod Holder, Black - 325033-1 - 354-3250331F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250321 Triple Threat™ Three Pole Rod Holder, White - 325032-1 - 354-3250321F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 322620 Sand Cast Brass Chrome Plated Folding Step | #12 Fastener - 322620-1 - 354-3226201F1
Sand cast brass folding step with chrome plated finish. Use #12 fastener.
Seadog 322150 Anchor Chock - Fits 5 To 20 Lb Anchors - #10 Fastener - 322150-1 - 354-3221501F1
Anchor Chocks help protect the surface of your deck in rough seas or while the boat is underway. Secures the anchor when not in use while still maintaining easy access. Constructed of investment cast 316 stainless steel for durability and corrosion resistance. For use with conventional fluke anchors from 5-20 lbs. Deck mounts with four #10 FH fasteners (not included).
Seadog 322080 Die Cast Brass Chrome Plated Hinged Chain Deck Pipe - #8 Fastener - 322080-1 - 354-3220801F1
Die cast hinged chain pipe with chrome finish. Use #8FH fasteners.
Seadog 322075 Stainless Replacement Cap & Chain - 322075-1 - 354-3220751F1
Replacement Cap & Chain
Seadog 322070 Forged Brass Chrome Plated Chain Deck Pipe With Chain - #8 Fastener - 322070 - 354-322070F1
These Chain Deck Pipes facilitate the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. Chrome plated forged brass construction. Oval deck pipe opening can accommodate a large thimble and line up to 1" in diameter plus the shackle and chain. Chain can remain in slot when the cover is closed. Installs with four #8 FH fasteners (not included).
Seadog 321800 Chain Deck Pipe, Stainless - 321800 - 354-321800F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Seadog 3181109 Performance Anchor Trolley Kit - 318110-9 - 354-3181109F1
The Performance Anchor Trolley Kit features a zig cleat for easy, one-handed adjustability. The durable, one-piece cheek blocks operate silently. Easily unclip the custom designed ring and use the system as a leash. Kit includes: 30' of 3/16" polypro deck line (1), zig zag cleat (1), ring clip (1), cheek blocks (2), nylon pad eyes (6), 10-32 X 3/4" PH machine screws (10), 10-32 Nyloc nuts (10), #10 flat washers (10), and well nuts (10).
Seadog 318018 Folding Grapnel Anchor, 18 Lbs. A: 1/2", B:22-1/2", C:5", Boat Length: 18' - 26' , Line/Length: 3/8"/150' Anchor, Chain Length: 1/4"/10'-20' - 318018 - 354-318018F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318009 Folding Grapnel Anchor, 9 Lbs A:1/2" , B:18", C:4-1/4". Boat Length: 5'-18', Line/Length:5/16"/120', Chain Length: 3/16"/10'-13' - 318009 - 354-318009F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318007 Folding Grapnel Anchor, 7 Lbs. A:1/2" , B:16", C:4-1/4", Boat Length: 5'-16', Line/Length:5/16"/50', Chain Length: 3/16"/7'-10' - 318007 - 354-318007F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318005 Folding Grapnel Anchor, 5.5 Lbs. Anchor, A:1/2" , B:14", C:4", Boat Length: 5'-14' , Line/Length:5/16"/50', Chain/Length: 3/16"/7'-10' , - 318005 - 354-318005F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318003K11 Folding Anchor Kit - Economy - 318003K1-1 - 354-318003K11F1
Economy Folding Anchor Kit includes everything you need to get started. It comes complete with our popular 3.5 lb. folding anchor, 20' of 3/16" line and a handy mesh bag. Constructed of hot dipped galvanized iron with forged flukes. For boats 5'-12' in length.
Seadog 318003K Folding Anchor Kit - Includes Adjustable Float & Stainless Fast Eye Boat Snap - 318003K - 354-318003Kf1
The Folding Anchor Kit features a 3.5 lb. painted hot dipped, galvanized folding grapnel anchor with 25' of 1/4" line, an adjustable float, stainless fast eye boat snap, and storage bag. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats. Inexpensive and easy to store they are also useful as a backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions..
Seadog 314272 Cast Iron River Anchor, Black Vinyl Coated, 13 Lbs. - 314272 - 354-314272F1
Designed specifically for river currents and heavy drift conditions, river anchors are ideal for pontoon and bass boats. The grappling action of the anchors three individual blades offers effective holding power for rivers and mud bottom lakes, even on windy days. The flow-through holes between the blades facilitate easy retrieval. One-piece cast iron construction.
